[PATCH 3.10 26/54] xhci: change xhci 1.0 only restrictions to support xhci 1.1

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream.

Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.

xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c  |    6 +++---
 drivers/usb/host/xhci-ring.c |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1473,10 +1473,10 @@ int xhci_endpoint_init(struct xhci_hcd *
 	 * use Event Data TRBs, and we don't chain in a link TRB on short
 	 * transfers, we're basically dividing by 1.
 	 *
-	 * xHCI 1.0 specification indicates that the Average TRB Length should
-	 * be set to 8 for control endpoints.
+	 * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+	 * should be set to 8 for control endpoints.
 	 */
-	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
 		ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
 	else
 		ep_ctx->tx_info |=
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3511,8 +3511,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
 	if (start_cycle == 0)
 		field |= 0x1;
 
-	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-	if (xhci->hci_version == 0x100) {
+	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+	if (xhci->hci_version >= 0x100) {
 		if (urb->transfer_buffer_length > 0) {
 			if (setup->bRequestType & USB_DIR_IN)
 				field |= TRB_TX_TYPE(TRB_DATA_IN);