From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Michel Stam , "David S. Miller" Subject: [PATCH 3.14 10/25] asix: Dont reset PHY on if_up for ASIX 88772 Date: Fri, 23 Oct 2015 10:45:51 -0700 Message-Id: <20151023174553.118512074@linuxfoundation.org> In-Reply-To: <20151023174552.800926510@linuxfoundation.org> References: <20151023174552.800926510@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Michel Stam [ Upstream commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31 ] I've noticed every time the interface is set to 'up,', the kernel reports that the link speed is set to 100 Mbps/Full Duplex, even when ethtool is used to set autonegotiation to 'off', half duplex, 10 Mbps. It can be tested by: ifconfig eth0 down ethtool -s eth0 autoneg off speed 10 duplex half ifconfig eth0 up Then checking 'dmesg' for the link speed. Signed-off-by: Michel Stam Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/asix_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -890,7 +890,7 @@ static const struct driver_info ax88772_ .unbind = ax88772_unbind, .status = asix_status, .link_reset = ax88772_link_reset, - .reset = ax88772_reset, + .reset = ax88772_link_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET, .rx_fixup = asix_rx_fixup_common, .tx_fixup = asix_tx_fixup,