From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Dong Aisheng <aisheng.dong@freescale.com>,
Shawn Guo <shawnguo@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Fabio Estevam <fabio.estevam@freescale.com>
Subject: [PATCH 4.1 86/86] dts: imx6: fix sd card gpio polarity specified in device tree
Date: Fri, 6 Nov 2015 11:23:25 -0800 [thread overview]
Message-ID: <20151106192209.550279654@linuxfoundation.org> (raw)
In-Reply-To: <20151106192205.351595349@linuxfoundation.org>
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dong Aisheng <aisheng.dong@freescale.com>
commit 89c1a8cf63f8c69dfddb6e377c04df8b25ab1c88 upstream.
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 8 ++++----
arch/arm/boot/dts/imx6q-arm2.dts | 5 +++--
arch/arm/boot/dts/imx6q-gk802.dts | 3 ++-
arch/arm/boot/dts/imx6q-tbs2910.dts | 4 ++--
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 4 +++-
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 3 ++-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 8 ++++----
arch/arm/boot/dts/imx6qdl-rex.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 8 ++++----
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 6 ++++--
arch/arm/boot/dts/imx6sl-evk.dts | 10 +++++-----
arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++--
arch/arm/boot/dts/imx6sx-sdb.dtsi | 4 ++--
22 files changed, 54 insertions(+), 47 deletions(-)
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -314,8 +314,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
@@ -196,8 +197,8 @@
};
&usdhc3 {
- cd-gpios = <&gpio6 11 0>;
- wp-gpios = <&gpio6 14 0>;
+ cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
@@ -161,7 +162,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
- cd-gpios = <&gpio6 11 0>;
+ cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
- cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -260,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
- cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -181,7 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -259,6 +259,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio1 4 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
/ {
regulators {
compatible = "simple-bus";
@@ -181,7 +183,7 @@
&usdhc2 { /* module slot */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio2 2 0>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -41,6 +41,7 @@
*/
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
chosen {
@@ -288,6 +289,6 @@
&pinctrl_hummingboard_usdhc2
>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio1 4 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -449,7 +449,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -457,7 +457,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -418,7 +418,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
- cd-gpios = <&gpio1 27 0>;
- wp-gpios = <&gpio1 29 0>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -340,7 +340,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -349,6 +349,6 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio6 15 0>;
- wp-gpios = <&gpio1 13 0>;
+ cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -444,8 +444,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -453,7 +453,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
- cd-gpios = <&gpio2 2 0>;
- wp-gpios = <&gpio2 3 0>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -571,8 +571,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
- cd-gpios = <&gpio2 0 0>;
- wp-gpios = <&gpio2 1 0>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
no-1-8-v;
- cd-gpios = <&gpio7 2 0>;
+ cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
@@ -690,7 +690,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
- cd-gpios = <&gpio7 3 0>;
+ cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
*
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
regulators {
compatible = "simple-bus";
@@ -250,13 +252,13 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio3 9 0>;
+ cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio4 7 0>;
- wp-gpios = <&gpio4 6 0>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -627,8 +627,8 @@
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
- cd-gpios = <&gpio5 0 0>;
- wp-gpios = <&gpio4 29 0>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -637,6 +637,6 @@
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio3 22 0>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
@@ -61,7 +61,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
- cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakup;
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
@@ -304,7 +304,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
next prev parent reply other threads:[~2015-11-06 19:32 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-06 19:21 [PATCH 4.1 00/86] 4.1.13-stable review Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 01/86] ath9k: declare required extra tx headroom Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 02/86] iwlwifi: dvm: fix D3 firmware PN programming Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 03/86] iwlwifi: fix firmware filename for 3160 Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 04/86] rtlwifi: rtl8821ae: Fix system lockups on boot Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 05/86] iwlwifi: mvm: clear csa countdown when AP is stopped Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 06/86] iwlwifi: mvm: fix D3 firmware PN programming Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 07/86] iwlwifi: mvm: init card correctly on ctkill exit check Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 08/86] iwlwifi: mvm: flush fw_dump_wk when mvm fails to start Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 09/86] iwlwifi: pci: add a few more PCI subvendor IDs for the 7265 series Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 10/86] iommu/vt-d: fix range computation when making room for large pages Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 11/86] iommu/amd: Fix BUG when faulting a PROT_NONE VMA Greg Kroah-Hartman
2015-11-06 20:49 ` Linus Torvalds
2015-11-06 20:55 ` Linus Torvalds
2015-11-08 11:45 ` Joerg Roedel
2015-11-06 19:22 ` [PATCH 4.1 12/86] iommu/amd: Dont clear DTE flags when modifying it Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 13/86] powerpc/rtas: Validate rtas.entry before calling enter_rtas() Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 14/86] drm: fix mutex leak in drm_dp_get_mst_branch_device Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 15/86] [media] si2157: Bounds check firmware Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 16/86] [media] si2168: " Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 17/86] [media] rtl28xxu: fix control message flaws Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 18/86] KVM: arm: use GIC support unconditionally Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 19/86] ALSA: hda - Fix inverted internal mic on Lenovo G50-80 Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 20/86] ALSA: hda - Fix deadlock at error in building PCM Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 21/86] ASoC: Add info callback for SX_TLV controls Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 22/86] ASoC: wm8904: Correct number of EQ registers Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 24/86] x86/setup: Extend low identity map to cover whole kernel range Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 25/86] mm: make sendfile(2) killable Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 26/86] fault-inject: fix inverted interval/probability values in printk Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 27/86] drm/nouveau/gem: return only valid domain when theres only one Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 28/86] drm/radeon/dpm: dont add pwm attributes if DPM is disabled Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 32/86] drm/radeon: dont try to recreate sysfs entries on resume Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 36/86] iio: st_accel: fix interrupt handling on LIS3LV02 Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 37/86] iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb() Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 38/86] rbd: require stable pages if message data CRCs are enabled Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 39/86] rbd: dont leak parent_spec in rbd_dev_probe_parent() Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 40/86] rbd: prevent kernel stack blow up on rbd map Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 41/86] ARM: orion: Fix DSA platform device after mvmdio conversion Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 42/86] ARM: mvebu: correct a385-db-ap compatible string Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 43/86] ARM: dts: Fix audio card detection on Peach boards Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 44/86] ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 45/86] ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 46/86] ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 47/86] ARM: 8449/1: fix bug in vdsomunge swab32 macro Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 48/86] Revert "ARM64: unwind: Fix PC calculation" Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 49/86] dm btree remove: fix a bug when rebalancing nodes after removal Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 50/86] dm btree: fix leak of bufio-backed block in btree_split_beneath error path Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 51/86] Revert "serial: 8250_dma: dont bother DMA with small transfers" Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 53/86] i2c: mv64xxx: really allow I2C offloading Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 54/86] xhci: handle no ping response error properly Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 55/86] xhci: Add spurious wakeup quirk for LynxPoint-LP controllers Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 56/86] xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing) Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 57/86] module: Fix locking in symbol_put_addr() Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 58/86] PCI: Prevent out of bounds access in numa_node override Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 59/86] ovl: free stack of paths in ovl_fill_super Greg Kroah-Hartman
2015-11-06 19:22 ` [PATCH 4.1 60/86] ovl: free lower_mnt array in ovl_put_super Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 61/86] ovl: use O_LARGEFILE in ovl_copy_up() Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 62/86] ovl: fix dentry reference leak Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 64/86] crypto: api - Only abort operations on fatal signal Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 65/86] md/raid1: submit_bio_wait() returns 0 on success Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 66/86] md/raid10: " Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 67/86] md/raid5: fix locking in handle_stripe_clean_event() Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 68/86] Revert "md: allow a partially recovered device to be hot-added to an array." Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 69/86] EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs() Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 70/86] irqchip/tegra: Propagate IRQ type setting to parent Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 72/86] MFD/OF: document MFD devices and handle simple-mfd Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 73/86] btrfs: fix possible leak in btrfs_ioctl_balance() Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 74/86] IB/cm: Fix rb-tree duplicate free and use-after-free Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 75/86] cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 76/86] arm64: kernel: rename __cpu_suspend to keep it aligned with arm Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 77/86] arm64: kernel: fix tcr_el1.t0sz restore on systems with extended idmap Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 78/86] arm64: compat: fix stxr failure case in SWP emulation Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 79/86] NVMe: Fix memory leak on retried commands Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 80/86] drm/vmwgfx: Fix up user_dmabuf refcounting Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 81/86] thp: use is_zero_pfn() only after pte_present() check Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 82/86] pinctrl: baytrail: Serialize all register access Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 83/86] pinctrl: baytrail: Use raw_spinlock for locking Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 84/86] serial: 8250_pci: Add support for 12 port Exar boards Greg Kroah-Hartman
2015-11-06 19:23 ` [PATCH 4.1 85/86] xen: fix backport of previous kexec patch Greg Kroah-Hartman
2015-11-06 19:23 ` Greg Kroah-Hartman [this message]
2015-11-07 1:43 ` [PATCH 4.1 00/86] 4.1.13-stable review Guenter Roeck
2015-11-07 2:53 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151106192209.550279654@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=aisheng.dong@freescale.com \
--cc=fabio.estevam@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).