[PATCH 3.14 05/37] net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carol L Soto <clsoto@linux.vnet.ibm.com>

[ Upstream commit c02b05011fadf8e409e41910217ca689f2fc9d91 ]

When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.

If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.

When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure.  This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).

However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct.  This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".

Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c |    2 +-
 drivers/net/ethernet/mellanox/mlx4/eq.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1987,7 +1987,7 @@ int mlx4_multi_func_init(struct mlx4_dev
 			spin_lock_init(&s_state->lock);
 		}
 
-		memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+		memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
 		priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
 		INIT_WORK(&priv->mfunc.master.comm_work,
 			  mlx4_master_comm_channel);
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -183,7 +183,7 @@ static void slave_event(struct mlx4_dev
 		return;
 	}
 
-	memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+	memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
 	s_eqe->slave_id = slave;
 	/* ensure all information is written before setting the ownersip bit */
 	wmb();