stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Clemens Ladisch <clemens@ladisch.de>,
	Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 3.14 36/37] ALSA: usb-audio: prevent CH345 multiport output SysEx corruption
Date: Mon,  7 Dec 2015 09:26:48 -0500	[thread overview]
Message-ID: <20151207141745.023072594@linuxfoundation.org> (raw)
In-Reply-To: <20151207141743.221453847@linuxfoundation.org>

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 1ca8b201309d842642f221db7f02f71c0af5be2d upstream.

The CH345 USB MIDI chip has two output ports.  However, they are
multiplexed through one pin, and the number of ports cannot be reduced
even for hardware that implements only one connector, so for those
devices, data sent to either port ends up on the same hardware output.
This becomes a problem when both ports are used at the same time, as
longer MIDI commands (such as SysEx messages) are likely to be
interrupted by messages from the other port, and thus to get lost.

It would not be possible for the driver to detect how many ports the
device actually has, except that in practice, _all_ devices built with
the CH345 have only one port.  So we can just ignore the device's
descriptors, and hardcode one output port.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/midi.c         |    3 +++
 sound/usb/quirks-table.h |   11 +++++++++++
 sound/usb/quirks.c       |    1 +
 sound/usb/usbaudio.h     |    1 +
 4 files changed, 16 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2291,6 +2291,9 @@ int snd_usbmidi_create(struct snd_card *
 
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
+	case QUIRK_MIDI_CH345:
+		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+		break;
 	default:
 		snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
 		err = -ENXIO;
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2875,6 +2875,17 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	.idProduct = 0x1020,
 },
 
+/* QinHeng devices */
+{
+	USB_DEVICE(0x1a86, 0x752d),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "QinHeng",
+		.product_name = "CH345",
+		.ifnum = 1,
+		.type = QUIRK_MIDI_CH345
+	}
+},
+
 /* KeithMcMillen Stringport */
 {
 	USB_DEVICE(0x1f38, 0x0001),
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -526,6 +526,7 @@ int snd_usb_create_quirk(struct snd_usb_
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
 		[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
+		[QUIRK_MIDI_CH345] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
 		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -84,6 +84,7 @@ enum quirk_type {
 	QUIRK_MIDI_AKAI,
 	QUIRK_MIDI_US122L,
 	QUIRK_MIDI_FTDI,
+	QUIRK_MIDI_CH345,
 	QUIRK_AUDIO_STANDARD_INTERFACE,
 	QUIRK_AUDIO_FIXED_ENDPOINT,
 	QUIRK_AUDIO_EDIROL_UAXX,



  parent reply	other threads:[~2015-12-07 14:26 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-07 14:26 [PATCH 3.14 00/37] 3.14.58-stable review Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 02/37] macvtap: unbreak receiving of gro skb with frag list Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 03/37] ppp: fix pppoe_dev deletion condition in pppoe_release() Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 04/37] RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 05/37] net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 06/37] stmmac: Correctly report PTP capabilities Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 07/37] ipmr: fix possible race resulting from improper usage of IP_INC_STATS_BH() in preemptible context Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 08/37] net: avoid NULL deref in inet_ctl_sock_destroy() Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 09/37] packet: race condition in packet_bind Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 10/37] net: fix a race in dst_release() Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 11/37] virtio-net: drop NETIF_F_FRAGLIST Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 12/37] RDS: verify the underlying transport exists before creating a connection Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 13/37] ARM: 8426/1: dma-mapping: add missing range check in dma_mmap() Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 14/37] ARM: 8427/1: dma-mapping: add support for offset parameter " Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 15/37] ARM: orion: Fix DSA platform device after mvmdio conversion Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 16/37] ARM: common: edma: Fix channel parameter for irq callbacks Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 17/37] x86/setup: Extend low identity map to cover whole kernel range Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 18/37] x86/setup: Fix low identity map for >= 2GB " Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 19/37] x86/cpu: Call verify_cpu() after having entered long mode too Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 20/37] x86/cpu: Fix SMAP check in PVOPS environments Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 21/37] mac80211: fix driver RSSI event calculations Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 22/37] net: mvneta: Fix CPU_MAP registers initialisation Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 23/37] mwifiex: fix mwifiex_rdeeprom_read() Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 24/37] staging: rtl8712: Add device ID for Sitecom WLA2100 Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 25/37] Bluetooth: hidp: fix device disconnect on idle timeout Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 26/37] Bluetooth: ath3k: Add new AR3012 0930:021c id Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 27/37] Bluetooth: ath3k: Add support of AR3012 0cf3:817b device Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 28/37] can: sja1000: clear interrupts on start Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 29/37] arm64: Fix compat register mappings Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 30/37] usblp: do not set TASK_INTERRUPTIBLE before lock Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 32/37] USB: ti_usb_3410_5052: Add Honeywell HGI80 ID Greg Kroah-Hartman
2015-12-07 14:26 ` [PATCH 3.14 35/37] ALSA: usb-audio: add packet size quirk for the Medeli DD305 Greg Kroah-Hartman
2015-12-07 14:26 ` Greg Kroah-Hartman [this message]
2015-12-07 14:26 ` [PATCH 3.14 37/37] ALSA: usb-audio: work around CH345 input SysEx corruption Greg Kroah-Hartman
2015-12-07 17:18 ` [PATCH 3.14 00/37] 3.14.58-stable review Shuah Khan
2015-12-07 21:16 ` Guenter Roeck
2015-12-09  3:26   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151207141745.023072594@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=clemens@ladisch.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).