From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>
Cc: intel-gfx@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@ffwll.ch>,
stable@vger.kernel.org, "Goel, Akash" <akash.goel@intel.com>,
Takashi Iwai <tiwai@suse.de>
Subject: Re: [Intel-gfx] [PATCH v5] drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping
Date: Thu, 10 Dec 2015 18:36:04 +0200 [thread overview]
Message-ID: <20151210163604.GC4437@intel.com> (raw)
In-Reply-To: <1449245126-26158-1-git-send-email-chris@chris-wilson.co.uk>
On Fri, Dec 04, 2015 at 04:05:26PM +0000, Chris Wilson wrote:
> A long time ago (before 3.14) we relied on a permanent pinning of the
> ifbdev to lock the fb in place inside the GGTT. However, the
> introduction of stealing the BIOS framebuffer and reusing its address in
> the GGTT for the fbdev has muddied waters and we use an inherited fb.
> However, the inherited fb is only pinned whilst it is active and we no
> longer have an explicit pin for the info->system_base mmapping used by
> the fbdev. The result is that after some aperture pressure the fbdev may
> be evicted, but we continue to write the fbcon into the same GGTT
> address - overwriting anything else that may be put into that offset.
> The effect is most pronounced across suspend/resume as
> intel_fbdev_set_suspend() does a full clear over the whole scanout.
>
> v2: Only unpin the intel_fb is we allocate it. If we inherit the fb from
> the BIOS, we do not own the pinned vma (except for the reference we add
> in this patch for our access via info->screen_base).
>
> v3: Finish balancing the vma pinning for the normal !preallocated case.
>
> v4: Try to simplify the pinning even further.
> v5: Leak the VMA (cleaned up by object-free) to avoid complicated error paths.
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: "Goel, Akash" <akash.goel@intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
> Cc: Lukas Wunner <lukas@wunner.de>
> Cc: stable@vger.kernel.org
This seems to have fixed my garbled text+fbcon dead after
suspend/hibernate issues. Well, only had the patch in for a day or so,
but so far so good.
Tested-by: Ville Syrj�l� <ville.syrjala@linux.intel.com>
Takashi, don't know if you already found this patch, but it's definitely
something you should try as well.
> ---
> drivers/gpu/drm/i915/intel_fbdev.c | 20 +++++++++++++-------
> 1 file changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index 7ccde58f8c98..bea75cafc623 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -163,13 +163,6 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
> goto out;
> }
>
> - /* Flush everything out, we'll be doing GTT only from now on */
> - ret = intel_pin_and_fence_fb_obj(NULL, fb, NULL);
> - if (ret) {
> - DRM_ERROR("failed to pin obj: %d\n", ret);
> - goto out;
> - }
> -
> mutex_unlock(&dev->struct_mutex);
>
> ifbdev->fb = to_intel_framebuffer(fb);
> @@ -225,6 +218,14 @@ static int intelfb_create(struct drm_fb_helper *helper,
>
> mutex_lock(&dev->struct_mutex);
>
> + /* Pin the GGTT vma for our access via info->screen_base.
> + * This also validates that any existing fb inherited from the
> + * BIOS is suitable for own access.
> + */
> + ret = intel_pin_and_fence_fb_obj(NULL, &ifbdev->fb->base, NULL);
> + if (ret)
> + goto out_unlock;
> +
> info = drm_fb_helper_alloc_fbi(helper);
> if (IS_ERR(info)) {
> DRM_ERROR("Failed to allocate fb_info\n");
> @@ -287,6 +288,7 @@ out_destroy_fbi:
> drm_fb_helper_release_fbi(helper);
> out_unpin:
> i915_gem_object_ggtt_unpin(obj);
> +out_unlock:
> mutex_unlock(&dev->struct_mutex);
> return ret;
> }
> @@ -524,6 +526,10 @@ static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
> static void intel_fbdev_destroy(struct drm_device *dev,
> struct intel_fbdev *ifbdev)
> {
> + /* We rely on the object-free to release the VMA pinning for
> + * the info->screen_base mmaping. Leaking the VMA is simpler than
> + * trying to rectify all the possible error paths leading here.
> + */
>
> drm_fb_helper_unregister_fbi(&ifbdev->helper);
> drm_fb_helper_release_fbi(&ifbdev->helper);
> --
> 2.6.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrj�l�
Intel OTC
next prev parent reply other threads:[~2015-12-10 16:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-20 14:16 [PATCH v2 1/2] drm/i915: Set the map-and-fenceable flag for preallocated objects Chris Wilson
2015-11-20 14:16 ` [PATCH v2 2/2] drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping Chris Wilson
2015-11-20 14:34 ` [PATCH v3] " Chris Wilson
2015-11-20 16:15 ` Jesse Barnes
2015-11-20 16:29 ` [PATCH v4] " Chris Wilson
2015-11-20 16:35 ` Jesse Barnes
2015-11-20 16:46 ` [Intel-gfx] " kbuild test robot
2015-11-20 18:01 ` kbuild test robot
2015-11-24 16:46 ` Daniel Vetter
2015-12-01 9:01 ` Jani Nikula
2015-11-24 21:20 ` Lukas Wunner
2015-12-04 16:05 ` [PATCH v5] " Chris Wilson
2015-12-06 20:33 ` Lukas Wunner
2015-12-16 10:52 ` Daniel Vetter
2015-12-17 11:34 ` [Intel-gfx] " Ville Syrjälä
2015-12-10 16:36 ` Ville Syrjälä [this message]
2015-12-10 16:41 ` Takashi Iwai
2015-12-17 15:59 ` Daniel Vetter
2015-12-23 11:07 ` Jani Nikula
2015-11-20 16:06 ` [PATCH v2 1/2] drm/i915: Set the map-and-fenceable flag for preallocated objects Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151210163604.GC4437@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=akash.goel@intel.com \
--cc=chris@chris-wilson.co.uk \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).