From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Peter Wu <peter@lekensteyn.nl>,
Hayes Wang <hayeswang@realtek.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.3 30/55] r8152: fix lockup when runtime PM is enabled
Date: Wed, 20 Jan 2016 16:44:05 -0800 [thread overview]
Message-ID: <20160120232228.993325691@linuxfoundation.org> (raw)
In-Reply-To: <20160120232227.417513468@linuxfoundation.org>
4.3-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Wu <peter@lekensteyn.nl>
[ Upstream commit 90186af404ada5a47b875bf3c16d0b02bb023ea0 ]
When an interface is brought up which was previously suspended (via
runtime PM), it would hang. This happens because napi_disable is called
before napi_enable.
Solve this by avoiding napi_enable in the resume during open function
(netif_running is true when open is called, IFF_UP is set after a
successful open; netif_running is false when close is called, but IFF_UP
is then still set).
While at it, remove WORK_ENABLE check from rtl8152_open (introduced with
the original change) because it cannot happen:
- After this patch, runtime resume will not set it during rtl8152_open.
- When link is up, rtl8152_open is not called.
- When link is down during system/auto suspend/resume, it is not set.
Fixes: 41cec84cf285 ("r8152: don't enable napi before rx ready")
Link: https://lkml.kernel.org/r/20151205105912.GA1766@al
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/r8152.c | 21 +++------------------
1 file changed, 3 insertions(+), 18 deletions(-)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3067,17 +3067,6 @@ static int rtl8152_open(struct net_devic
mutex_lock(&tp->control);
- /* The WORK_ENABLE may be set when autoresume occurs */
- if (test_bit(WORK_ENABLE, &tp->flags)) {
- clear_bit(WORK_ENABLE, &tp->flags);
- usb_kill_urb(tp->intr_urb);
- cancel_delayed_work_sync(&tp->schedule);
-
- /* disable the tx/rx, if the workqueue has enabled them. */
- if (netif_carrier_ok(netdev))
- tp->rtl_ops.disable(tp);
- }
-
tp->rtl_ops.up(tp);
rtl8152_set_speed(tp, AUTONEG_ENABLE,
@@ -3124,12 +3113,6 @@ static int rtl8152_close(struct net_devi
} else {
mutex_lock(&tp->control);
- /* The autosuspend may have been enabled and wouldn't
- * be disable when autoresume occurs, because the
- * netif_running() would be false.
- */
- rtl_runtime_suspend_enable(tp, false);
-
tp->rtl_ops.down(tp);
mutex_unlock(&tp->control);
@@ -3512,7 +3495,7 @@ static int rtl8152_resume(struct usb_int
netif_device_attach(tp->netdev);
}
- if (netif_running(tp->netdev)) {
+ if (netif_running(tp->netdev) && tp->netdev->flags & IFF_UP) {
if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
rtl_runtime_suspend_enable(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
@@ -3532,6 +3515,8 @@ static int rtl8152_resume(struct usb_int
}
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
} else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ if (tp->netdev->flags & IFF_UP)
+ rtl_runtime_suspend_enable(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
}
next prev parent reply other threads:[~2016-01-21 0:44 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 0:43 [PATCH 4.3 00/55] 4.3.4-stable review Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 01/55] Revert "vrf: fix double free and memory corruption on register_netdevice failure" Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 02/55] vrf: fix double free and memory corruption on register_netdevice failure Greg Kroah-Hartman
2016-01-21 1:37 ` Ben Hutchings
2016-01-22 7:53 ` Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 03/55] tipc: Fix kfree_skb() of uninitialised pointer Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 04/55] ACPI: Use correct IRQ when uninstalling ACPI interrupt handler Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 05/55] ACPI: Using correct irq when waiting for events Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 06/55] ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 07/55] tpm, tpm_tis: fix tpm_tis ACPI detection issue with TPM 2.0 Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 08/55] toshiba_acpi: Initialize hotkey_event_type variable Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 09/55] USB: cdc_acm: Ignore Infineon Flash Loader utility Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 10/55] USB: serial: Another Infineon flash loader USB ID Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 11/55] usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 12/55] USB: cp210x: Remove CP2110 ID from compatibility list Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 13/55] USB: add quirk for devices with broken LPM Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 14/55] USB: whci-hcd: add check for dma mapping error Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 15/55] usb: gadget: pxa27x: fix suspend callback Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 16/55] USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 17/55] usb: musb: USB_TI_CPPI41_DMA requires dmaengine support Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 18/55] usb: core : hub: Fix BOS NULL pointer kernel panic Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 19/55] usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 20/55] pppoe: fix memory corruption in padt work structure Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 21/55] gre6: allow to update all parameters via rtnl Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 22/55] atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation Greg Kroah-Hartman
2016-01-21 0:43 ` [PATCH 4.3 24/55] vxlan: fix incorrect RCO bit in VXLAN header Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 25/55] sctp: use the same clock as if sock source timestamps were on Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 26/55] sctp: update the netstamp_needed counter when copying sockets Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 27/55] sctp: also copy sk_tsflags when copying the socket Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 29/55] net: qca_spi: fix transmit queue timeout handling Greg Kroah-Hartman
2016-01-21 0:44 ` Greg Kroah-Hartman [this message]
2016-01-21 0:44 ` [PATCH 4.3 31/55] ipv6: sctp: clone options to avoid use after free Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 32/55] phy: micrel: Fix finding PHY properties in MAC node Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 33/55] openvswitch: Fix helper reference leak Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 34/55] openvswitch: Respect conntrack zone even if invalid Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 35/55] uapi: export ila.h Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 37/55] sh_eth: fix kernel oops in skb_put() Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 38/55] net: fix IP early demux races Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 39/55] pptp: verify sockaddr_len in pptp_bind() and pptp_connect() Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 40/55] vlan: Fix untag operations of stacked vlans with REORDER_HEADER off Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 41/55] skbuff: Fix offset error in skb_reorder_vlan_header Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 42/55] net: check both type and procotol for tcp sockets Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 43/55] net_sched: make qdisc_tree_decrease_qlen() work for non mq Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 44/55] bluetooth: Validate socket address length in sco_sock_bind() Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 45/55] net: fix uninitialized variable issue Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 47/55] inet: tcp: fix inetpeer_set_addr_v4() Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 48/55] rhashtable: Enforce minimum size on initial hash table Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 49/55] gianfar: Dont enable RX Filer if not supported Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 50/55] fou: clean up socket with kfree_rcu Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 51/55] af_unix: Revert lock_interruptible in stream receive code Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 52/55] tcp: restore fastopen with no data in SYN packet Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 53/55] rhashtable: Fix walker list corruption Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 54/55] KEYS: Fix race between read and revoke Greg Kroah-Hartman
2016-01-21 0:44 ` [PATCH 4.3 55/55] KEYS: Fix keyring ref leak in join_session_keyring() Greg Kroah-Hartman
2016-01-21 1:39 ` [PATCH 4.3 00/55] 4.3.4-stable review Shuah Khan
2016-01-22 7:51 ` Greg Kroah-Hartman
2016-01-21 9:42 ` Mel Gorman
2016-01-22 7:54 ` Greg Kroah-Hartman
2016-01-22 8:12 ` Mel Gorman
2016-01-21 12:24 ` Guenter Roeck
2016-01-22 7:51 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160120232228.993325691@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=hayeswang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter@lekensteyn.nl \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).