[PATCH 4.4 000/137] 4.4.3-stable review

[PATCH 4.4 000/137] 4.4.3-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.3 release.
There are 137 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.3-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.3-rc1

Luis R. Rodriguez <mcgrof@suse.com>
    modules: fix modparam async_probe request

Rusty Russell <rusty@rustcorp.com.au>
    module: wrapper for symbol name.

Thomas Gleixner <tglx@linutronix.de>
    itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper

Thomas Gleixner <tglx@linutronix.de>
    posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper

Thomas Gleixner <tglx@linutronix.de>
    timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper

Mateusz Guzik <mguzik@redhat.com>
    prctl: take mmap sem for writing to protect against others

Dave Chinner <dchinner@redhat.com>
    xfs: log mount failures don't wait for buffers to be released

Dave Chinner <david@fromorbit.com>
    Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"

Dave Chinner <dchinner@redhat.com>
    xfs: inode recovery readahead can race with inode buffer creation

Darrick J. Wong <darrick.wong@oracle.com>
    libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct

Miklos Szeredi <miklos@szeredi.hu>
    ovl: setattr: check permissions before copy-up

Miklos Szeredi <miklos@szeredi.hu>
    ovl: root: copy attr

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    ovl: check dentry positiveness in ovl_cleanup_whiteouts()

Vito Caputo <vito.caputo@coreos.com>
    ovl: use a minimal buffer in ovl_copy_xattr

Miklos Szeredi <miklos@szeredi.hu>
    ovl: allow zero size xattr

Thomas Gleixner <tglx@linutronix.de>
    futex: Drop refcount if requeue_pi() acquired the rtmutex

Toshi Kani <toshi.kani@hpe.com>
    devm_memremap_release(): fix memremap'd addr handling

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    ipc/shm: handle removed segments gracefully in shm_mmap()

Dan Carpenter <dan.carpenter@oracle.com>
    intel_scu_ipcutil: underflow in scu_reg_access()

Vineet Gupta <Vineet.Gupta1@synopsys.com>
    mm,thp: khugepaged: call pte flush at the time of collapse

Eric Dumazet <edumazet@google.com>
    dump_stack: avoid potential deadlocks

Konstantin Khlebnikov <koct9i@gmail.com>
    radix-tree: fix oops after radix_tree_iter_retry

Matthew Wilcox <willy@linux.intel.com>
    drivers/hwspinlock: fix race between radix tree insertion and lookup

Matthew Wilcox <willy@linux.intel.com>
    radix-tree: fix race in gang lookup

Rich Felker <dalias@libc.org>
    MAINTAINERS: return arch/sh to maintained state, with new maintainers

Martijn Coenen <maco@google.com>
    memcg: only free spare array when readers are done

Michael Holzheu <holzheu@linux.vnet.ibm.com>
    numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390

Mike Kravetz <mike.kravetz@oracle.com>
    fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()

Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
    scripts/bloat-o-meter: fix python3 syntax error

Laura Abbott <labbott@fedoraproject.org>
    dma-debug: switch check from _text to _stext

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    m32r: fix m32104ut_defconfig build fail

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Fix list corruption in urb dequeue at host removal

Mathias Nyman <mathias.nyman@linux.intel.com>
    Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"

David Woodhouse <David.Woodhouse@intel.com>
    iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts

CQ Tang <cq.tang@intel.com>
    iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG

David Woodhouse <David.Woodhouse@intel.com>
    iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users

Baoquan He <bhe@redhat.com>
    iommu/amd: Correct the wrong setting of alias DTE in do_attach

Jeremy McNicoll <jmcnicol@redhat.com>
    iommu/vt-d: Don't skip PCI devices when disabling IOTLB

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: vmmouse - fix absolute device registration

James Bottomley <JBottomley@Odin.com>
    string_helpers: fix precision loss for some inputs

Aurélien Francillon <aurelien@francillon.net>
    Input: i8042 - add Fujitsu Lifebook U745 to the nomux list

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    Input: elantech - mark protocols v2 and v3 as semi-mt

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm: fix regression in remap_file_pages() emulation

Konstantin Khlebnikov <koct9i@gmail.com>
    mm: replace vma_lock_anon_vma with anon_vma_lock_read/write

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm: fix mlock accouting

Dan Williams <dan.j.williams@intel.com>
    libnvdimm: fix namespace object confusion in is_uuid_busy()

Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
    mm: soft-offline: check return value in second __get_any_page() call

Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
    perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data

Greg Kurz <gkurz@linux.vnet.ibm.com>
    KVM: PPC: Fix ONE_REG AltiVec support

Thomas Huth <thuth@redhat.com>
    KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8

Andre Przywara <andre.przywara@arm.com>
    KVM: arm/arm64: Fix reference to uninitialised VGIC

Marek Szyprowski <m.szyprowski@samsung.com>
    arm64: dma-mapping: fix handling of devices registered before arch_initcall

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix save_secure_ram_context for rodata

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix l2dis_3630 for rodata

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix l2_inv_api_params for rodata

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix wait_dll_lock_timed for rodata

Wenyou Yang <wenyou.yang@atmel.com>
    ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

Nicolas Ferre <nicolas.ferre@atmel.com>
    ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type

Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>
    ARM: dts: at91: sama5d4: fix instance id of DBGU

Alexandre Belloni <alexandre.belloni@free-electrons.com>
    ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt

H. Nikolaus Schaller <hns@goldelico.com>
    ARM: dts: omap5-board-common: enable rtc and charging of backup battery

Tony Lindgren <tony@atomide.com>
    ARM: dts: Fix omap5 PMIC control lines for RTC writes

Adam Ford <aford173@gmail.com>
    ARM: dts: Fix wl12xx missing clocks that cause hangs

Linus Walleij <linus.walleij@linaro.org>
    ARM: nomadik: fix up SD/MMC DT settings

Linus Walleij <linus.walleij@linaro.org>
    ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()

Linus Walleij <linus.walleij@linaro.org>
    ARM: 8519/1: ICST: try other dividends than 1

Mika Penttilä <mika.penttila@nextfour.com>
    arm64: mm: avoid calling apply_to_page_range on empty range

Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
    ARM: mvebu: remove duplicated regulator definition in Armada 388 GP

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/ioda: Set "read" permission when "write" is set

Gavin Shan <gwshan@linux.vnet.ibm.com>
    powerpc/powernv: Fix stale PE primary bus

Gavin Shan <gwshan@linux.vnet.ibm.com>
    powerpc/eeh: Fix stale cached primary bus

Andreas Schwab <schwab@linux-m68k.org>
    powerpc: Fix dedotify for binutils >= 2.26

Alan Modra <amodra@gmail.com>
    powerpc: Simplify module TOC handling

Gavin Shan <gwshan@linux.vnet.ibm.com>
    powerpc/eeh: Fix PE location code

Trond Myklebust <trond.myklebust@primarydata.com>
    SUNRPC: Fixup socket wait for memory

Andrew Gabbasov <andrew_gabbasov@mentor.com>
    udf: Check output buffer length when converting name to CS0

Andrew Gabbasov <andrew_gabbasov@mentor.com>
    udf: Prevent buffer overrun with multi-byte characters

Vegard Nossum <vegard.nossum@oracle.com>
    udf: limit the maximum number of indirect extents in a row

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn

Andrew Elble <aweits@rit.edu>
    nfs: Fix race in __update_open_stateid()

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()

Trond Myklebust <trond.myklebust@primarydata.com>
    NFS: Fix attribute cache revalidation

Anton Protopopov <a.s.protopopov@gmail.com>
    cifs: fix erroneous return value

Vasily Averin <vvs@virtuozzo.com>
    cifs_dbg() outputs an uninitialized buffer in cifs_readdir()

Rabin Vincent <rabin.vincent@axis.com>
    cifs: fix race between call_async() and reconnect()

Jamie Bainbridge <jamie.bainbridge@gmail.com>
    cifs: Ratelimit kernel log messages

Dan Carpenter <dan.carpenter@oracle.com>
    iio: inkern: fix a NULL dereference on error

Akinobu Mita <akinobu.mita@gmail.com>
    iio: pressure: mpl115: fix temperature offset sign

Gabriele Mazzotta <gabriele.mzt@gmail.com>
    iio: light: acpi-als: Report data as processed

Yong Li <sdliyong@gmail.com>
    iio: dac: mcp4725: set iio name property in sysfs

Vegard Nossum <vegard.nossum@oracle.com>
    iio: add IIO_TRIGGER dependency to STK8BA50

Vegard Nossum <vegard.nossum@oracle.com>
    iio: add HAS_IOMEM dependency to VF610_ADC

Markus Elfring <elfring@users.sourceforge.net>
    iio-light: Use a signed return type for ltr501_match_samp_freq()

Jonathan Cameron <jic23@kernel.org>
    iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.

Lars-Peter Clausen <lars@metafoo.de>
    iio: adis_buffer: Fix out-of-bounds memory access

James Bottomley <James.Bottomley@HansenPartnership.com>
    scsi: fix soft lockup in scsi_remove_target() on module removal

Mika Westerberg <mika.westerberg@linux.intel.com>
    SCSI: Add Marvell Console to VPD blacklist

Hannes Reinecke <hare@suse.de>
    scsi_dh_rdac: always retry MODE SELECT on command lock violation

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration

Alan Stern <stern@rowland.harvard.edu>
    SCSI: fix crashes in sd and sr runtime PM

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Fix potential dead-lock during node acl delete

Mike Christie <mchristi@redhat.com>
    scsi: add Synology to 1024 sector blacklist

James Bottomley <James.Bottomley@HansenPartnership.com>
    klist: fix starting point removed bug in klist iterators

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracepoints: Do not trace when cpu is offline

Arnd Bergmann <arnd@arndb.de>
    tracing: Fix freak link error caused by branch tracer

Adrian Hunter <adrian.hunter@intel.com>
    perf tools: tracepoint_error() can receive e=NULL, robustify it

Steven Rostedt <rostedt@goodmis.org>
    tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines

Jann Horn <jann@thejh.net>
    ptrace: use fsuid, fsgid, effective creds for fs access checks

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix direct IO requests not reporting IO error to user space

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix page reading in extent_same ioctl leading to csum errors

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix invalid page accesses in extent_same (dedup) ioctl

David Sterba <dsterba@suse.com>
    btrfs: properly set the termination value of ctx->pos in readdir

David Sterba <dsterba@suse.com>
    Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix fitrim discarding device area reserved for boot loader's use

David Sterba <dsterba@suse.com>
    btrfs: handle invalid num_stripes in sys_array

Eryu Guan <guaneryu@gmail.com>
    ext4: don't read blocks from disk after extents being swapped

Insu Yun <wuninsu@gmail.com>
    ext4: fix potential integer overflow

Jan Kara <jack@suse.cz>
    ext4: fix scheduling in atomic on group checksum failure

Peter Hurley <peter@hurleysoftware.com>
    serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)

Mika Westerberg <mika.westerberg@linux.intel.com>
    serial: 8250_pci: Add Intel Broadwell ports

Jeremy McNicoll <jmcnicol@redhat.com>
    tty: Add support for PCIe WCH382 2S multi-IO card

Herton R. Krzesinski <herton@redhat.com>
    pty: make sure super_block is still valid in final /dev/tty close

Herton R. Krzesinski <herton@redhat.com>
    pty: fix possible use after free of tty->driver_data

Peter Hurley <peter@hurleysoftware.com>
    staging/speakup: Use tty_ldisc_ref() for paste kworker

Tony Lindgren <tony@atomide.com>
    phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload

Tony Lindgren <tony@atomide.com>
    phy: twl4030-usb: Relase usb phy on unload

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix double port list deletion

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix leak of pool buffer at concurrent writes

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Cancel probe work instead of flush at remove

Toshi Kani <toshi.kani@hpe.com>
    x86/mm: Fix vmalloc_fault() to handle large pages properly

Toshi Kani <toshi.kani@hpe.com>
    x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()

Toshi Kani <toshi.kani@hpe.com>
    x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable

Matt Fleming <matt@codeblueprint.co.uk>
    x86/mm/pat: Avoid truncation when converting cpa->numpages to address

Jan Beulich <JBeulich@suse.com>
    x86/mm: Fix types used in pgprot cacheability flags translations


-------------

Diffstat:

 MAINTAINERS                                  |   4 +-
 Makefile                                     |   4 +-
 arch/arm/boot/dts/armada-388-gp.dts          |  10 --
 arch/arm/boot/dts/at91-sama5d4_xplained.dts  |   8 +-
 arch/arm/boot/dts/at91-sama5d4ek.dts         |  11 +++
 arch/arm/boot/dts/logicpd-torpedo-som.dtsi   |   1 +
 arch/arm/boot/dts/omap5-board-common.dtsi    |  33 +++++++
 arch/arm/boot/dts/sama5d4.dtsi               |   2 +-
 arch/arm/boot/dts/ste-nomadik-stn8815.dtsi   |  37 +++----
 arch/arm/common/icst.c                       |   9 +-
 arch/arm/mach-omap2/sleep34xx.S              |  61 ++++++------
 arch/arm/mach-omap2/sleep44xx.S              |  25 +++--
 arch/arm64/mm/dma-mapping.c                  |   4 +
 arch/arm64/mm/pageattr.c                     |   3 +
 arch/m32r/kernel/setup.c                     |   3 +
 arch/powerpc/include/asm/eeh.h               |   1 +
 arch/powerpc/kernel/eeh_driver.c             |   3 +
 arch/powerpc/kernel/eeh_pe.c                 |  35 +++----
 arch/powerpc/kernel/misc_64.S                |  28 ------
 arch/powerpc/kernel/module_64.c              |  14 ++-
 arch/powerpc/kvm/book3s_hv_rmhandlers.S      |   2 +-
 arch/powerpc/kvm/powerpc.c                   |  20 ++--
 arch/powerpc/platforms/powernv/eeh-powernv.c |   5 +-
 arch/powerpc/platforms/powernv/pci-ioda.c    |   1 +
 arch/powerpc/platforms/powernv/pci.c         |  26 +++++
 arch/powerpc/platforms/powernv/pci.h         |   1 +
 arch/x86/include/asm/pgtable_types.h         |   6 +-
 arch/x86/lib/copy_user_64.S                  | 142 +++++++++++++++++++--------
 arch/x86/mm/fault.c                          |  15 ++-
 arch/x86/mm/pageattr.c                       |   4 +-
 drivers/hwspinlock/hwspinlock_core.c         |   4 +
 drivers/iio/accel/Kconfig                    |   1 +
 drivers/iio/adc/Kconfig                      |   1 +
 drivers/iio/adc/ti_am335x_adc.c              |   2 +-
 drivers/iio/dac/mcp4725.c                    |   1 +
 drivers/iio/imu/adis_buffer.c                |   2 +-
 drivers/iio/inkern.c                         |   2 +
 drivers/iio/light/acpi-als.c                 |   6 +-
 drivers/iio/light/ltr501.c                   |   2 +-
 drivers/iio/pressure/mpl115.c                |   2 +-
 drivers/input/mouse/elantech.c               |   2 +-
 drivers/input/mouse/vmmouse.c                |  13 +--
 drivers/input/serio/i8042-x86ia64io.h        |   7 ++
 drivers/iommu/amd_iommu.c                    |   2 +-
 drivers/iommu/dmar.c                         |   2 +-
 drivers/iommu/intel-iommu.c                  |   2 +-
 drivers/iommu/intel-svm.c                    |  37 +++++--
 drivers/iommu/intel_irq_remapping.c          |   2 +-
 drivers/nvdimm/namespace_devs.c              |  53 ++++++++++
 drivers/nvdimm/region_devs.c                 |  56 -----------
 drivers/phy/phy-twl4030-usb.c                |  14 ++-
 drivers/platform/x86/intel_scu_ipcutil.c     |   2 +-
 drivers/scsi/device_handler/scsi_dh_rdac.c   |   4 +-
 drivers/scsi/scsi_devinfo.c                  |   2 +
 drivers/scsi/scsi_sysfs.c                    |   6 +-
 drivers/scsi/sd.c                            |   7 +-
 drivers/scsi/sg.c                            |   2 +-
 drivers/scsi/sr.c                            |   4 +
 drivers/staging/speakup/selection.c          |   5 +-
 drivers/target/iscsi/iscsi_target_configfs.c |  16 ++-
 drivers/tty/pty.c                            |  21 +++-
 drivers/tty/serial/8250/8250_pci.c           |  50 ++++++++++
 drivers/tty/serial/omap-serial.c             |   8 +-
 drivers/usb/host/xhci-ring.c                 |  10 --
 drivers/usb/host/xhci.c                      |   4 +-
 fs/btrfs/backref.c                           |  10 +-
 fs/btrfs/delayed-inode.c                     |   3 +-
 fs/btrfs/delayed-inode.h                     |   2 +-
 fs/btrfs/disk-io.c                           |   1 -
 fs/btrfs/inode.c                             |  16 ++-
 fs/btrfs/ioctl.c                             | 119 +++++++++++++++++-----
 fs/btrfs/volumes.c                           |  28 ++++--
 fs/cifs/cifs_debug.c                         |   2 +-
 fs/cifs/cifs_debug.h                         |   9 +-
 fs/cifs/cifsencrypt.c                        |   2 +-
 fs/cifs/connect.c                            |   2 +-
 fs/cifs/readdir.c                            |   1 +
 fs/cifs/transport.c                          |   6 +-
 fs/devpts/inode.c                            |  20 ++++
 fs/ext4/balloc.c                             |   7 +-
 fs/ext4/ialloc.c                             |   6 +-
 fs/ext4/move_extent.c                        |  15 ++-
 fs/ext4/resize.c                             |   2 +-
 fs/hugetlbfs/inode.c                         |  19 ++--
 fs/nfs/flexfilelayout/flexfilelayout.c       |   8 +-
 fs/nfs/inode.c                               |  54 +++++++---
 fs/nfs/nfs4proc.c                            |   2 +-
 fs/overlayfs/copy_up.c                       |  41 +++++---
 fs/overlayfs/inode.c                         |  13 +++
 fs/overlayfs/readdir.c                       |   3 +-
 fs/overlayfs/super.c                         |   5 +
 fs/proc/array.c                              |   2 +-
 fs/proc/base.c                               |  21 ++--
 fs/proc/namespaces.c                         |   4 +-
 fs/proc/task_mmu.c                           |   7 +-
 fs/timerfd.c                                 |   2 +-
 fs/udf/inode.c                               |  15 +++
 fs/udf/unicode.c                             |  21 +++-
 fs/xfs/libxfs/xfs_format.h                   |   2 +-
 fs/xfs/libxfs/xfs_inode_buf.c                |  12 ++-
 fs/xfs/xfs_buf.c                             |  17 ++++
 fs/xfs/xfs_trans_ail.c                       |   1 -
 include/linux/compiler.h                     |   2 +-
 include/linux/devpts_fs.h                    |   4 +
 include/linux/intel-iommu.h                  |   3 +
 include/linux/ptrace.h                       |  24 ++++-
 include/linux/radix-tree.h                   |  22 ++++-
 include/linux/rmap.h                         |  14 ---
 include/linux/tracepoint.h                   |   5 +
 ipc/shm.c                                    |  53 ++++++++--
 kernel/events/core.c                         |   2 +-
 kernel/futex.c                               |   7 +-
 kernel/futex_compat.c                        |   2 +-
 kernel/kcmp.c                                |   4 +-
 kernel/memremap.c                            |   2 +-
 kernel/module.c                              |  28 +++---
 kernel/ptrace.c                              |  39 ++++++--
 kernel/sys.c                                 |  20 ++--
 kernel/time/itimer.c                         |   2 +-
 kernel/time/posix-timers.c                   |   2 +-
 lib/dma-debug.c                              |   2 +-
 lib/dump_stack.c                             |   7 +-
 lib/klist.c                                  |   6 +-
 lib/radix-tree.c                             |  12 ++-
 lib/string_helpers.c                         |  63 ++++++++----
 mm/memcontrol.c                              |  11 ++-
 mm/memory-failure.c                          |   2 +-
 mm/mlock.c                                   |   2 +-
 mm/mmap.c                                    |  89 ++++++++++-------
 mm/pgtable-generic.c                         |   4 +-
 mm/process_vm_access.c                       |   2 +-
 net/sunrpc/xprtsock.c                        |  49 ++++-----
 scripts/bloat-o-meter                        |   8 +-
 scripts/mod/modpost.c                        |   3 +-
 security/commoncap.c                         |   7 +-
 sound/core/pcm_native.c                      |  16 ++-
 sound/core/seq/seq_memory.c                  |  13 ++-
 sound/core/seq/seq_ports.c                   |  13 ++-
 sound/pci/hda/hda_intel.c                    |   4 +-
 tools/lib/traceevent/event-parse.c           |   5 +-
 tools/perf/util/parse-events.c               |   3 +
 tools/perf/util/session.c                    |   2 +-
 virt/kvm/arm/arch_timer.c                    |   9 +-
 143 files changed, 1320 insertions(+), 619 deletions(-)

[PATCH 4.4 001/137] x86/mm: Fix types used in pgprot cacheability flags translations

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit 3625c2c234ef66acf21a72d47a5ffa94f6c5ebf2 upstream.

For PAE kernels "unsigned long" is not suitable to hold page protection
flags, since _PAGE_NX doesn't fit there. This is the reason for quite a
few W+X pages getting reported as insecure during boot (observed namely
for the entire initrd range).

Fixes: 281d4078be ("x86: Make page cache mode a real type")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <JGross@suse.com>
Link: http://lkml.kernel.org/r/56A7635602000078000CAFF1@prv-mh.provo.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pgtable_types.h |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -363,20 +363,18 @@ static inline enum page_cache_mode pgpro
 }
 static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
 {
+	pgprotval_t val = pgprot_val(pgprot);
 	pgprot_t new;
-	unsigned long val;
 
-	val = pgprot_val(pgprot);
 	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
 		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 	return new;
 }
 static inline pgprot_t pgprot_large_2_4k(pgprot_t pgprot)
 {
+	pgprotval_t val = pgprot_val(pgprot);
 	pgprot_t new;
-	unsigned long val;
 
-	val = pgprot_val(pgprot);
 	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
 			  ((val & _PAGE_PAT_LARGE) >>
 			   (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));

[PATCH 4.4 003/137] x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit ee9737c924706aaa72c2ead93e3ad5644681dc1c upstream.

Add comments to __copy_user_nocache() to clarify its procedures
and alignment requirements.

Also change numeric branch target labels to named local labels.

No code changed:

 arch/x86/lib/copy_user_64.o:

    text    data     bss     dec     hex filename
    1239       0       0    1239     4d7 copy_user_64.o.before
    1239       0       0    1239     4d7 copy_user_64.o.after

 md5:
    58bed94c2db98c1ca9a2d46d0680aaae  copy_user_64.o.before.asm
    58bed94c2db98c1ca9a2d46d0680aaae  copy_user_64.o.after.asm

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: brian.boylston@hpe.com
Cc: dan.j.williams@intel.com
Cc: linux-nvdimm@lists.01.org
Cc: micah.parrish@hpe.com
Cc: ross.zwisler@linux.intel.com
Cc: vishal.l.verma@intel.com
Link: http://lkml.kernel.org/r/1455225857-12039-2-git-send-email-toshi.kani@hpe.com
[ Small readability edits and added object file comparison. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/copy_user_64.S |  114 ++++++++++++++++++++++++++++----------------
 1 file changed, 73 insertions(+), 41 deletions(-)

--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -232,17 +232,30 @@ ENDPROC(copy_user_enhanced_fast_string)
 
 /*
  * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination/source out of cache for more performance.
+ * This will force destination out of cache for more performance.
+ *
+ * Note: Cached memory copy is used when destination or size is not
+ * naturally aligned. That is:
+ *  - Require 8-byte alignment when size is 8 bytes or larger.
  */
 ENTRY(__copy_user_nocache)
 	ASM_STAC
+
+	/* If size is less than 8 bytes, go to byte copy */
 	cmpl $8,%edx
-	jb 20f		/* less then 8 bytes, go to byte copy loop */
+	jb .L_1b_cache_copy_entry
+
+	/* If destination is not 8-byte aligned, "cache" copy to align it */
 	ALIGN_DESTINATION
+
+	/* Set 4x8-byte copy count and remainder */
 	movl %edx,%ecx
 	andl $63,%edx
 	shrl $6,%ecx
-	jz 17f
+	jz .L_8b_nocache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 4x8-byte nocache loop-copy */
+.L_4x8b_nocache_copy_loop:
 1:	movq (%rsi),%r8
 2:	movq 1*8(%rsi),%r9
 3:	movq 2*8(%rsi),%r10
@@ -262,60 +275,79 @@ ENTRY(__copy_user_nocache)
 	leaq 64(%rsi),%rsi
 	leaq 64(%rdi),%rdi
 	decl %ecx
-	jnz 1b
-17:	movl %edx,%ecx
+	jnz .L_4x8b_nocache_copy_loop
+
+	/* Set 8-byte copy count and remainder */
+.L_8b_nocache_copy_entry:
+	movl %edx,%ecx
 	andl $7,%edx
 	shrl $3,%ecx
-	jz 20f
-18:	movq (%rsi),%r8
-19:	movnti %r8,(%rdi)
+	jz .L_1b_cache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 8-byte nocache loop-copy */
+.L_8b_nocache_copy_loop:
+20:	movq (%rsi),%r8
+21:	movnti %r8,(%rdi)
 	leaq 8(%rsi),%rsi
 	leaq 8(%rdi),%rdi
 	decl %ecx
-	jnz 18b
-20:	andl %edx,%edx
-	jz 23f
+	jnz .L_8b_nocache_copy_loop
+
+	/* If no byte left, we're done */
+.L_1b_cache_copy_entry:
+	andl %edx,%edx
+	jz .L_finish_copy
+
+	/* Perform byte "cache" loop-copy for the remainder */
 	movl %edx,%ecx
-21:	movb (%rsi),%al
-22:	movb %al,(%rdi)
+.L_1b_cache_copy_loop:
+40:	movb (%rsi),%al
+41:	movb %al,(%rdi)
 	incq %rsi
 	incq %rdi
 	decl %ecx
-	jnz 21b
-23:	xorl %eax,%eax
+	jnz .L_1b_cache_copy_loop
+
+	/* Finished copying; fence the prior stores */
+.L_finish_copy:
+	xorl %eax,%eax
 	ASM_CLAC
 	sfence
 	ret
 
 	.section .fixup,"ax"
-30:	shll $6,%ecx
+.L_fixup_4x8b_copy:
+	shll $6,%ecx
 	addl %ecx,%edx
-	jmp 60f
-40:	lea (%rdx,%rcx,8),%rdx
-	jmp 60f
-50:	movl %ecx,%edx
-60:	sfence
+	jmp .L_fixup_handle_tail
+.L_fixup_8b_copy:
+	lea (%rdx,%rcx,8),%rdx
+	jmp .L_fixup_handle_tail
+.L_fixup_1b_copy:
+	movl %ecx,%edx
+.L_fixup_handle_tail:
+	sfence
 	jmp copy_user_handle_tail
 	.previous
 
-	_ASM_EXTABLE(1b,30b)
-	_ASM_EXTABLE(2b,30b)
-	_ASM_EXTABLE(3b,30b)
-	_ASM_EXTABLE(4b,30b)
-	_ASM_EXTABLE(5b,30b)
-	_ASM_EXTABLE(6b,30b)
-	_ASM_EXTABLE(7b,30b)
-	_ASM_EXTABLE(8b,30b)
-	_ASM_EXTABLE(9b,30b)
-	_ASM_EXTABLE(10b,30b)
-	_ASM_EXTABLE(11b,30b)
-	_ASM_EXTABLE(12b,30b)
-	_ASM_EXTABLE(13b,30b)
-	_ASM_EXTABLE(14b,30b)
-	_ASM_EXTABLE(15b,30b)
-	_ASM_EXTABLE(16b,30b)
-	_ASM_EXTABLE(18b,40b)
-	_ASM_EXTABLE(19b,40b)
-	_ASM_EXTABLE(21b,50b)
-	_ASM_EXTABLE(22b,50b)
+	_ASM_EXTABLE(1b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(2b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(3b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(4b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(5b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(6b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(7b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(8b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(9b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(10b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(11b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(12b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(13b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(14b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(15b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(16b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(20b,.L_fixup_8b_copy)
+	_ASM_EXTABLE(21b,.L_fixup_8b_copy)
+	_ASM_EXTABLE(40b,.L_fixup_1b_copy)
+	_ASM_EXTABLE(41b,.L_fixup_1b_copy)
 ENDPROC(__copy_user_nocache)

[PATCH 4.4 004/137] x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit a82eee7424525e34e98d821dd059ce14560a1e35 upstream.

Data corruption issues were observed in tests which initiated
a system crash/reset while accessing BTT devices.  This problem
is reproducible.

The BTT driver calls pmem_rw_bytes() to update data in pmem
devices.  This interface calls __copy_user_nocache(), which
uses non-temporal stores so that the stores to pmem are
persistent.

__copy_user_nocache() uses non-temporal stores when a request
size is 8 bytes or larger (and is aligned by 8 bytes).  The
BTT driver updates the BTT map table, which entry size is
4 bytes.  Therefore, updates to the map table entries remain
cached, and are not written to pmem after a crash.

Change __copy_user_nocache() to use non-temporal store when
a request size is 4 bytes.  The change extends the current
byte-copy path for a less-than-8-bytes request, and does not
add any overhead to the regular path.

Reported-and-tested-by: Micah Parrish <micah.parrish@hpe.com>
Reported-and-tested-by: Brian Boylston <brian.boylston@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/1455225857-12039-3-git-send-email-toshi.kani@hpe.com
[ Small readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/copy_user_64.S |   36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -237,13 +237,14 @@ ENDPROC(copy_user_enhanced_fast_string)
  * Note: Cached memory copy is used when destination or size is not
  * naturally aligned. That is:
  *  - Require 8-byte alignment when size is 8 bytes or larger.
+ *  - Require 4-byte alignment when size is 4 bytes.
  */
 ENTRY(__copy_user_nocache)
 	ASM_STAC
 
-	/* If size is less than 8 bytes, go to byte copy */
+	/* If size is less than 8 bytes, go to 4-byte copy */
 	cmpl $8,%edx
-	jb .L_1b_cache_copy_entry
+	jb .L_4b_nocache_copy_entry
 
 	/* If destination is not 8-byte aligned, "cache" copy to align it */
 	ALIGN_DESTINATION
@@ -282,7 +283,7 @@ ENTRY(__copy_user_nocache)
 	movl %edx,%ecx
 	andl $7,%edx
 	shrl $3,%ecx
-	jz .L_1b_cache_copy_entry	/* jump if count is 0 */
+	jz .L_4b_nocache_copy_entry	/* jump if count is 0 */
 
 	/* Perform 8-byte nocache loop-copy */
 .L_8b_nocache_copy_loop:
@@ -294,11 +295,33 @@ ENTRY(__copy_user_nocache)
 	jnz .L_8b_nocache_copy_loop
 
 	/* If no byte left, we're done */
-.L_1b_cache_copy_entry:
+.L_4b_nocache_copy_entry:
+	andl %edx,%edx
+	jz .L_finish_copy
+
+	/* If destination is not 4-byte aligned, go to byte copy: */
+	movl %edi,%ecx
+	andl $3,%ecx
+	jnz .L_1b_cache_copy_entry
+
+	/* Set 4-byte copy count (1 or 0) and remainder */
+	movl %edx,%ecx
+	andl $3,%edx
+	shrl $2,%ecx
+	jz .L_1b_cache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 4-byte nocache copy: */
+30:	movl (%rsi),%r8d
+31:	movnti %r8d,(%rdi)
+	leaq 4(%rsi),%rsi
+	leaq 4(%rdi),%rdi
+
+	/* If no bytes left, we're done: */
 	andl %edx,%edx
 	jz .L_finish_copy
 
 	/* Perform byte "cache" loop-copy for the remainder */
+.L_1b_cache_copy_entry:
 	movl %edx,%ecx
 .L_1b_cache_copy_loop:
 40:	movb (%rsi),%al
@@ -323,6 +346,9 @@ ENTRY(__copy_user_nocache)
 .L_fixup_8b_copy:
 	lea (%rdx,%rcx,8),%rdx
 	jmp .L_fixup_handle_tail
+.L_fixup_4b_copy:
+	lea (%rdx,%rcx,4),%rdx
+	jmp .L_fixup_handle_tail
 .L_fixup_1b_copy:
 	movl %ecx,%edx
 .L_fixup_handle_tail:
@@ -348,6 +374,8 @@ ENTRY(__copy_user_nocache)
 	_ASM_EXTABLE(16b,.L_fixup_4x8b_copy)
 	_ASM_EXTABLE(20b,.L_fixup_8b_copy)
 	_ASM_EXTABLE(21b,.L_fixup_8b_copy)
+	_ASM_EXTABLE(30b,.L_fixup_4b_copy)
+	_ASM_EXTABLE(31b,.L_fixup_4b_copy)
 	_ASM_EXTABLE(40b,.L_fixup_1b_copy)
 	_ASM_EXTABLE(41b,.L_fixup_1b_copy)
 ENDPROC(__copy_user_nocache)

[PATCH 4.4 005/137] x86/mm: Fix vmalloc_fault() to handle large pages properly

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit f4eafd8bcd5229e998aa252627703b8462c3b90f upstream.

A kernel page fault oops with the callstack below was observed
when a read syscall was made to a pmem device after a huge amount
(>512GB) of vmalloc ranges was allocated by ioremap() on a x86_64
system:

     BUG: unable to handle kernel paging request at ffff880840000ff8
     IP: vmalloc_fault+0x1be/0x300
     PGD c7f03a067 PUD 0
     Oops: 0000 [#1] SM
     Call Trace:
        __do_page_fault+0x285/0x3e0
        do_page_fault+0x2f/0x80
        ? put_prev_entity+0x35/0x7a0
        page_fault+0x28/0x30
        ? memcpy_erms+0x6/0x10
        ? schedule+0x35/0x80
        ? pmem_rw_bytes+0x6a/0x190 [nd_pmem]
        ? schedule_timeout+0x183/0x240
        btt_log_read+0x63/0x140 [nd_btt]
         :
        ? __symbol_put+0x60/0x60
        ? kernel_read+0x50/0x80
        SyS_finit_module+0xb9/0xf0
        entry_SYSCALL_64_fastpath+0x1a/0xa4

Since v4.1, ioremap() supports large page (pud/pmd) mappings in
x86_64 and PAE.  vmalloc_fault() however assumes that the vmalloc
range is limited to pte mappings.

vmalloc faults do not normally happen in ioremap'd ranges since
ioremap() sets up the kernel page tables, which are shared by
user processes.  pgd_ctor() sets the kernel's PGD entries to
user's during fork().  When allocation of the vmalloc ranges
crosses a 512GB boundary, ioremap() allocates a new pud table
and updates the kernel PGD entry to point it.  If user process's
PGD entry does not have this update yet, a read/write syscall
to the range will cause a vmalloc fault, which hits the Oops
above as it does not handle a large page properly.

Following changes are made to vmalloc_fault().

64-bit:

 - No change for the PGD sync operation as it handles large
   pages already.
 - Add pud_huge() and pmd_huge() to the validation code to
   handle large pages.
 - Change pud_page_vaddr() to pud_pfn() since an ioremap range
   is not directly mapped (while the if-statement still works
   with a bogus addr).
 - Change pmd_page() to pmd_pfn() since an ioremap range is not
   backed by struct page (while the if-statement still works
   with a bogus addr).

32-bit:
 - No change for the sync operation since the index3 PGD entry
   covers the entire vmalloc range, which is always valid.
   (A separate change to sync PGD entry is necessary if this
    memory layout is changed regardless of the page size.)
 - Add pmd_huge() to the validation code to handle large pages.
   This is for completeness since vmalloc_fault() won't happen
   in ioremap'd ranges as its PGD entry is always valid.

Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/1455758214-24623-1-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/fault.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -287,6 +287,9 @@ static noinline int vmalloc_fault(unsign
 	if (!pmd_k)
 		return -1;
 
+	if (pmd_huge(*pmd_k))
+		return 0;
+
 	pte_k = pte_offset_kernel(pmd_k, address);
 	if (!pte_present(*pte_k))
 		return -1;
@@ -360,8 +363,6 @@ void vmalloc_sync_all(void)
  * 64-bit:
  *
  *   Handle a fault on the vmalloc area
- *
- * This assumes no large pages in there.
  */
 static noinline int vmalloc_fault(unsigned long address)
 {
@@ -403,17 +404,23 @@ static noinline int vmalloc_fault(unsign
 	if (pud_none(*pud_ref))
 		return -1;
 
-	if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
+	if (pud_none(*pud) || pud_pfn(*pud) != pud_pfn(*pud_ref))
 		BUG();
 
+	if (pud_huge(*pud))
+		return 0;
+
 	pmd = pmd_offset(pud, address);
 	pmd_ref = pmd_offset(pud_ref, address);
 	if (pmd_none(*pmd_ref))
 		return -1;
 
-	if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
+	if (pmd_none(*pmd) || pmd_pfn(*pmd) != pmd_pfn(*pmd_ref))
 		BUG();
 
+	if (pmd_huge(*pmd))
+		return 0;
+
 	pte_ref = pte_offset_kernel(pmd_ref, address);
 	if (!pte_present(*pte_ref))
 		return -1;


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH 4.4 006/137] ALSA: hda - Cancel probe work instead of flush at remove

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 0b8c82190c12e530eb6003720dac103bf63e146e upstream.

The commit [991f86d7ae4e: ALSA: hda - Flush the pending probe work at
remove] introduced the sync of async probe work at remove for fixing
the race.  However, this may lead to another hangup when the module
removal is performed quickly before starting the probe work, because
it issues flush_work() and it's blocked forever.

The workaround is to use cancel_work_sync() instead of flush_work()
there.

Fixes: 991f86d7ae4e ('ALSA: hda - Flush the pending probe work at remove')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2143,10 +2143,10 @@ static void azx_remove(struct pci_dev *p
 	struct hda_intel *hda;
 
 	if (card) {
-		/* flush the pending probing work */
+		/* cancel the pending probing work */
 		chip = card->private_data;
 		hda = container_of(chip, struct hda_intel, chip);
-		flush_work(&hda->probe_work);
+		cancel_work_sync(&hda->probe_work);
 
 		snd_card_free(card);
 	}

[PATCH 4.4 007/137] ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 67ec1072b053c15564e6090ab30127895dc77a89 upstream.

A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice
in the same code path, e.g. one in snd_pcm_action_nonatomic() and
another in snd_pcm_stream_lock().  Usually this is OK, but when a
write lock is issued between these two read locks, the problem
happens: the write lock is blocked due to the first reade lock, and
the second read lock is also blocked by the write lock.  This
eventually deadlocks.

The reason is the way rwsem manages waiters; it's queued like FIFO, so
even if the writer itself doesn't take the lock yet, it blocks all the
waiters (including reads) queued after it.

As a workaround, in this patch, we replace the standard down_write()
with an spinning loop.  This is far from optimal, but it's good
enough, as the spinning time is supposed to be relatively short for
normal PCM operations, and the code paths requiring the write lock
aren't called so often.

Reported-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/pcm_native.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -74,6 +74,18 @@ static int snd_pcm_open(struct file *fil
 static DEFINE_RWLOCK(snd_pcm_link_rwlock);
 static DECLARE_RWSEM(snd_pcm_link_rwsem);
 
+/* Writer in rwsem may block readers even during its waiting in queue,
+ * and this may lead to a deadlock when the code path takes read sem
+ * twice (e.g. one in snd_pcm_action_nonatomic() and another in
+ * snd_pcm_stream_lock()).  As a (suboptimal) workaround, let writer to
+ * spin until it gets the lock.
+ */
+static inline void down_write_nonblock(struct rw_semaphore *lock)
+{
+	while (!down_write_trylock(lock))
+		cond_resched();
+}
+
 /**
  * snd_pcm_stream_lock - Lock the PCM stream
  * @substream: PCM substream
@@ -1813,7 +1825,7 @@ static int snd_pcm_link(struct snd_pcm_s
 		res = -ENOMEM;
 		goto _nolock;
 	}
-	down_write(&snd_pcm_link_rwsem);
+	down_write_nonblock(&snd_pcm_link_rwsem);
 	write_lock_irq(&snd_pcm_link_rwlock);
 	if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN ||
 	    substream->runtime->status->state != substream1->runtime->status->state ||
@@ -1860,7 +1872,7 @@ static int snd_pcm_unlink(struct snd_pcm
 	struct snd_pcm_substream *s;
 	int res = 0;
 
-	down_write(&snd_pcm_link_rwsem);
+	down_write_nonblock(&snd_pcm_link_rwsem);
 	write_lock_irq(&snd_pcm_link_rwlock);
 	if (!snd_pcm_stream_linked(substream)) {
 		res = -EALREADY;

[PATCH 4.4 008/137] ALSA: seq: Fix leak of pool buffer at concurrent writes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit d99a36f4728fcbcc501b78447f625bdcce15b842 upstream.

When multiple concurrent writes happen on the ALSA sequencer device
right after the open, it may try to allocate vmalloc buffer for each
write and leak some of them.  It's because the presence check and the
assignment of the buffer is done outside the spinlock for the pool.

The fix is to move the check and the assignment into the spinlock.

(The current implementation is suboptimal, as there can be multiple
 unnecessary vmallocs because the allocation is done before the check
 in the spinlock.  But the pool size is already checked beforehand, so
 this isn't a big problem; that is, the only possible path is the
 multiple writes before any pool assignment, and practically seen, the
 current coverage should be "good enough".)

The issue was triggered by syzkaller fuzzer.

BugLink: http://lkml.kernel.org/r/CACT4Y+bSzazpXNvtAr=WXaL8hptqjHwqEyFA+VN2AWEx=aurkg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_memory.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -383,15 +383,20 @@ int snd_seq_pool_init(struct snd_seq_poo
 
 	if (snd_BUG_ON(!pool))
 		return -EINVAL;
-	if (pool->ptr)			/* should be atomic? */
-		return 0;
 
-	pool->ptr = vmalloc(sizeof(struct snd_seq_event_cell) * pool->size);
-	if (!pool->ptr)
+	cellptr = vmalloc(sizeof(struct snd_seq_event_cell) * pool->size);
+	if (!cellptr)
 		return -ENOMEM;
 
 	/* add new cells to the free cell list */
 	spin_lock_irqsave(&pool->lock, flags);
+	if (pool->ptr) {
+		spin_unlock_irqrestore(&pool->lock, flags);
+		vfree(cellptr);
+		return 0;
+	}
+
+	pool->ptr = cellptr;
 	pool->free = NULL;
 
 	for (cell = 0; cell < pool->size; cell++) {

[PATCH 4.4 009/137] ALSA: seq: Fix double port list deletion

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 13d5e5d4725c64ec06040d636832e78453f477b7 upstream.

The commit [7f0973e973cd: ALSA: seq: Fix lockdep warnings due to
double mutex locks] split the management of two linked lists (source
and destination) into two individual calls for avoiding the AB/BA
deadlock.  However, this may leave the possible double deletion of one
of two lists when the counterpart is being deleted concurrently.
It ends up with a list corruption, as revealed by syzkaller fuzzer.

This patch fixes it by checking the list emptiness and skipping the
deletion and the following process.

BugLink: http://lkml.kernel.org/r/CACT4Y+bay9qsrz6dQu31EcGaH9XwfW7o3oBzSQUG9fMszoh=Sg@mail.gmail.com
Fixes: 7f0973e973cd ('ALSA: seq: Fix lockdep warnings due to 'double mutex locks)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_ports.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -535,19 +535,22 @@ static void delete_and_unsubscribe_port(
 					bool is_src, bool ack)
 {
 	struct snd_seq_port_subs_info *grp;
+	struct list_head *list;
+	bool empty;
 
 	grp = is_src ? &port->c_src : &port->c_dest;
+	list = is_src ? &subs->src_list : &subs->dest_list;
 	down_write(&grp->list_mutex);
 	write_lock_irq(&grp->list_lock);
-	if (is_src)
-		list_del(&subs->src_list);
-	else
-		list_del(&subs->dest_list);
+	empty = list_empty(list);
+	if (!empty)
+		list_del_init(list);
 	grp->exclusive = 0;
 	write_unlock_irq(&grp->list_lock);
 	up_write(&grp->list_mutex);
 
-	unsubscribe_port(client, port, grp, &subs->info, ack);
+	if (!empty)
+		unsubscribe_port(client, port, grp, &subs->info, ack);
 }
 
 /* connect two ports */

[PATCH 4.4 010/137] phy: twl4030-usb: Relase usb phy on unload

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit b241d31ef2f6a289d33dcaa004714b26e06f476f upstream.

Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430
will try to use a non-existing phy and oops:

Unable to handle kernel paging request at virtual address b6f7c1f0
...
[<c048a284>] (devm_usb_get_phy_by_node) from [<bf0758ac>]
(omap2430_musb_init+0x44/0x2b4 [omap2430])
[<bf0758ac>] (omap2430_musb_init [omap2430]) from [<bf055ec0>]
(musb_init_controller+0x194/0x878 [musb_hdrc])

Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/phy-twl4030-usb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -750,6 +750,7 @@ static int twl4030_usb_remove(struct pla
 	struct twl4030_usb *twl = platform_get_drvdata(pdev);
 	int val;
 
+	usb_remove_phy(&twl->phy);
 	pm_runtime_get_sync(twl->dev);
 	cancel_delayed_work(&twl->id_workaround_work);
 	device_remove_file(twl->dev, &dev_attr_vbus);

[PATCH 4.4 011/137] phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit 58a66dba1beac2121d931cda4682ae4d40816af5 upstream.

If we reload phy-twl4030-usb, we get a warning about unbalanced
pm_runtime_enable. Let's fix the issue and also fix idling of the
device on unload before we attempt to shut it down.

If we don't properly idle the PHY before shutting it down on removal,
the twl4030 ends up consuming about 62mW of extra power compared to
running idle with the module loaded.

Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/phy-twl4030-usb.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -715,6 +715,7 @@ static int twl4030_usb_probe(struct plat
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
@@ -758,6 +759,13 @@ static int twl4030_usb_remove(struct pla
 	/* set transceiver mode to power on defaults */
 	twl4030_usb_set_mode(twl, -1);
 
+	/* idle ulpi before powering off */
+	if (cable_present(twl->linkstat))
+		pm_runtime_put_noidle(twl->dev);
+	pm_runtime_mark_last_busy(twl->dev);
+	pm_runtime_put_sync_suspend(twl->dev);
+	pm_runtime_disable(twl->dev);
+
 	/* autogate 60MHz ULPI clock,
 	 * clear dpll clock request for i2c access,
 	 * disable 32KHz
@@ -772,11 +780,6 @@ static int twl4030_usb_remove(struct pla
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	if (cable_present(twl->linkstat))
-		pm_runtime_put_noidle(twl->dev);
-	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put(twl->dev);
-
 	return 0;
 }
 

[PATCH 4.4 012/137] staging/speakup: Use tty_ldisc_ref() for paste kworker

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit f4f9edcf9b5289ed96113e79fa65a7bf27ecb096 upstream.

As the function documentation for tty_ldisc_ref_wait() notes, it is
only callable from a tty file_operations routine; otherwise there
is no guarantee the ref won't be NULL.

The key difference with the VT's paste_selection() is that is an ioctl,
where __speakup_paste_selection() is completely async kworker, kicked
off from interrupt context.

Fixes: 28a821c30688 ("Staging: speakup: Update __speakup_paste_selection()
       tty (ab)usage to match vt")
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/speakup/selection.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/staging/speakup/selection.c
+++ b/drivers/staging/speakup/selection.c
@@ -142,7 +142,9 @@ static void __speakup_paste_selection(st
 	struct tty_ldisc *ld;
 	DECLARE_WAITQUEUE(wait, current);
 
-	ld = tty_ldisc_ref_wait(tty);
+	ld = tty_ldisc_ref(tty);
+	if (!ld)
+		goto tty_unref;
 	tty_buffer_lock_exclusive(&vc->port);
 
 	add_wait_queue(&vc->paste_wait, &wait);
@@ -162,6 +164,7 @@ static void __speakup_paste_selection(st
 
 	tty_buffer_unlock_exclusive(&vc->port);
 	tty_ldisc_deref(ld);
+tty_unref:
 	tty_kref_put(tty);
 }
 

[PATCH 4.4 013/137] pty: fix possible use after free of tty->driver_data

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herton R. Krzesinski <herton@redhat.com>

commit 2831c89f42dcde440cfdccb9fee9f42d54bbc1ef upstream.

This change fixes a bug for a corner case where we have the the last
release from a pty master/slave coming from a previously opened /dev/tty
file. When this happens, the tty->driver_data can be stale, due to all
ptmx or pts/N files having already been closed before (and thus the inode
related to these files, which tty->driver_data points to, being already
freed/destroyed).

The fix here is to keep a reference on the opened master ptmx inode.
We maintain the inode referenced until the final pty_unix98_shutdown,
and only pass this inode to devpts_kill_index.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/pty.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -681,7 +681,14 @@ static void pty_unix98_remove(struct tty
 /* this is called once with whichever end is closed last */
 static void pty_unix98_shutdown(struct tty_struct *tty)
 {
-	devpts_kill_index(tty->driver_data, tty->index);
+	struct inode *ptmx_inode;
+
+	if (tty->driver->subtype == PTY_TYPE_MASTER)
+		ptmx_inode = tty->driver_data;
+	else
+		ptmx_inode = tty->link->driver_data;
+	devpts_kill_index(ptmx_inode, tty->index);
+	iput(ptmx_inode); /* drop reference we acquired at ptmx_open */
 }
 
 static const struct tty_operations ptm_unix98_ops = {
@@ -773,6 +780,15 @@ static int ptmx_open(struct inode *inode
 	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 	tty->driver_data = inode;
 
+	/*
+	 * In the case where all references to ptmx inode are dropped and we
+	 * still have /dev/tty opened pointing to the master/slave pair (ptmx
+	 * is closed/released before /dev/tty), we must make sure that the inode
+	 * is still valid when we call the final pty_unix98_shutdown, thus we
+	 * hold an additional reference to the ptmx inode
+	 */
+	ihold(inode);
+
 	tty_add_file(tty, filp);
 
 	slave_inode = devpts_pty_new(inode,

[PATCH 4.4 014/137] pty: make sure super_block is still valid in final /dev/tty close

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herton R. Krzesinski <herton@redhat.com>

commit 1f55c718c290616889c04946864a13ef30f64929 upstream.

Considering current pty code and multiple devpts instances, it's possible
to umount a devpts file system while a program still has /dev/tty opened
pointing to a previosuly closed pty pair in that instance. In the case all
ptmx and pts/N files are closed, umount can be done. If the program closes
/dev/tty after umount is done, devpts_kill_index will use now an invalid
super_block, which was already destroyed in the umount operation after
running ->kill_sb. This is another "use after free" type of issue, but now
related to the allocated super_block instance.

To avoid the problem (warning at ida_remove and potential crashes) for
this specific case, I added two functions in devpts which grabs additional
references to the super_block, which pty code now uses so it makes sure
the super block structure is still valid until pty shutdown is done.
I also moved the additional inode references to the same functions, which
also covered similar case with inode being freed before /dev/tty final
close/shutdown.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/pty.c         |    9 ++++++---
 fs/devpts/inode.c         |   20 ++++++++++++++++++++
 include/linux/devpts_fs.h |    4 ++++
 3 files changed, 30 insertions(+), 3 deletions(-)

--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -688,7 +688,7 @@ static void pty_unix98_shutdown(struct t
 	else
 		ptmx_inode = tty->link->driver_data;
 	devpts_kill_index(ptmx_inode, tty->index);
-	iput(ptmx_inode); /* drop reference we acquired at ptmx_open */
+	devpts_del_ref(ptmx_inode);
 }
 
 static const struct tty_operations ptm_unix98_ops = {
@@ -785,9 +785,12 @@ static int ptmx_open(struct inode *inode
 	 * still have /dev/tty opened pointing to the master/slave pair (ptmx
 	 * is closed/released before /dev/tty), we must make sure that the inode
 	 * is still valid when we call the final pty_unix98_shutdown, thus we
-	 * hold an additional reference to the ptmx inode
+	 * hold an additional reference to the ptmx inode. For the same /dev/tty
+	 * last close case, we also need to make sure the super_block isn't
+	 * destroyed (devpts instance unmounted), before /dev/tty is closed and
+	 * on its release devpts_kill_index is called.
 	 */
-	ihold(inode);
+	devpts_add_ref(inode);
 
 	tty_add_file(tty, filp);
 
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -575,6 +575,26 @@ void devpts_kill_index(struct inode *ptm
 	mutex_unlock(&allocated_ptys_lock);
 }
 
+/*
+ * pty code needs to hold extra references in case of last /dev/tty close
+ */
+
+void devpts_add_ref(struct inode *ptmx_inode)
+{
+	struct super_block *sb = pts_sb_from_inode(ptmx_inode);
+
+	atomic_inc(&sb->s_active);
+	ihold(ptmx_inode);
+}
+
+void devpts_del_ref(struct inode *ptmx_inode)
+{
+	struct super_block *sb = pts_sb_from_inode(ptmx_inode);
+
+	iput(ptmx_inode);
+	deactivate_super(sb);
+}
+
 /**
  * devpts_pty_new -- create a new inode in /dev/pts/
  * @ptmx_inode: inode of the master
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -19,6 +19,8 @@
 
 int devpts_new_index(struct inode *ptmx_inode);
 void devpts_kill_index(struct inode *ptmx_inode, int idx);
+void devpts_add_ref(struct inode *ptmx_inode);
+void devpts_del_ref(struct inode *ptmx_inode);
 /* mknod in devpts */
 struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
 		void *priv);
@@ -32,6 +34,8 @@ void devpts_pty_kill(struct inode *inode
 /* Dummy stubs in the no-pty case */
 static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
 static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
+static inline void devpts_add_ref(struct inode *ptmx_inode) { }
+static inline void devpts_del_ref(struct inode *ptmx_inode) { }
 static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
 		dev_t device, int index, void *priv)
 {

[PATCH 4.4 015/137] tty: Add support for PCIe WCH382 2S multi-IO card

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy McNicoll <jmcnicol@redhat.com>

commit 7dde55787b43a8f2b4021916db38d90c03a2ec64 upstream.

WCH382 2S board is a PCIe card with 2 DB9 COM ports detected as
Serial controller: Device 1c00:3253 (rev 10) (prog-if 05 [16850])

Signed-off-by: Jeremy McNicoll <jmcnicol@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1936,6 +1936,7 @@ pci_wch_ch38x_setup(struct serial_privat
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
+#define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
 #define PCI_VENDOR_ID_PERICOM			0x12D8
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
@@ -2618,6 +2619,14 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
+	/* WCH CH382 2S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
 	/* WCH CH382 2S1P card (16850 clone) */
 	{
 		.vendor         = PCIE_VENDOR_ID_WCH,
@@ -2936,6 +2945,7 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_wch382_2,
 	pbn_wch384_4,
 	pbn_pericom_PI7C9X7951,
 	pbn_pericom_PI7C9X7952,
@@ -3756,6 +3766,13 @@ static struct pciserial_board pci_boards
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+	[pbn_wch382_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+		.first_offset	= 0xC0,
+	},
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -5545,6 +5562,10 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch382_2 },
+
 	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },

[PATCH 4.4 016/137] serial: 8250_pci: Add Intel Broadwell ports

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 6c55d9b98335f7f6bd5f061866ff1633401f3a44 upstream.

Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.

Add both Broadwell LPSS UART ports to the list of supported devices.

Signed-off-by: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1379,6 +1379,9 @@ ce4100_serial_setup(struct serial_privat
 #define PCI_DEVICE_ID_INTEL_BSW_UART1	0x228a
 #define PCI_DEVICE_ID_INTEL_BSW_UART2	0x228c
 
+#define PCI_DEVICE_ID_INTEL_BDW_UART1	0x9ce3
+#define PCI_DEVICE_ID_INTEL_BDW_UART2	0x9ce4
+
 #define BYT_PRV_CLK			0x800
 #define BYT_PRV_CLK_EN			(1 << 0)
 #define BYT_PRV_CLK_M_VAL_SHIFT		1
@@ -1461,11 +1464,13 @@ byt_serial_setup(struct serial_private *
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT_UART1:
 	case PCI_DEVICE_ID_INTEL_BSW_UART1:
+	case PCI_DEVICE_ID_INTEL_BDW_UART1:
 		rx_param->src_id = 3;
 		tx_param->dst_id = 2;
 		break;
 	case PCI_DEVICE_ID_INTEL_BYT_UART2:
 	case PCI_DEVICE_ID_INTEL_BSW_UART2:
+	case PCI_DEVICE_ID_INTEL_BDW_UART2:
 		rx_param->src_id = 5;
 		tx_param->dst_id = 4;
 		break;
@@ -2063,6 +2068,20 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BDW_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -5522,6 +5541,16 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID,  PCI_ANY_ID,
 		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
 		pbn_byt },
+
+	/* Intel Broadwell */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
 
 	/*
 	 * Intel Quark x1000

[PATCH 4.4 017/137] serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit 308bbc9ab838d0ace0298268c7970ba9513e2c65 upstream.

The omap-serial driver emulates RS485 delays using software timers,
but neglects to clamp the input values from the unprivileged
ioctl(TIOCSRS485). Because the software implementation busy-waits,
malicious userspace could stall the cpu for ~49 days.

Clamp the input values to < 100ms.

Fixes: 4a0ac0f55b18 ("OMAP: add RS485 support")
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/omap-serial.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1343,7 +1343,7 @@ static inline void serial_omap_add_conso
 
 /* Enable or disable the rs485 support */
 static int
-serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned int mode;
@@ -1356,8 +1356,12 @@ serial_omap_config_rs485(struct uart_por
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
 
+	/* Clamp the delays to [0, 100ms] */
+	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+	rs485->delay_rts_after_send  = min(rs485->delay_rts_after_send, 100U);
+
 	/* store new config */
-	port->rs485 = *rs485conf;
+	port->rs485 = *rs485;
 
 	/*
 	 * Just as a precaution, only allow rs485

[PATCH 4.4 018/137] ext4: fix scheduling in atomic on group checksum failure

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 05145bd799e498ce4e3b5145894174ee881f02b0 upstream.

When block group checksum is wrong, we call ext4_error() while holding
group spinlock from ext4_init_block_bitmap() or
ext4_init_inode_bitmap() which results in scheduling while in atomic.
Fix the issue by calling ext4_error() later after dropping the spinlock.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/balloc.c |    7 ++++---
 fs/ext4/ialloc.c |    6 ++++--
 2 files changed, 8 insertions(+), 5 deletions(-)

--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -191,7 +191,6 @@ static int ext4_init_block_bitmap(struct
 	/* If checksum is bad mark all blocks used to prevent allocation
 	 * essentially implementing a per-group read-only flag. */
 	if (!ext4_group_desc_csum_verify(sb, block_group, gdp)) {
-		ext4_error(sb, "Checksum bad for group %u", block_group);
 		grp = ext4_get_group_info(sb, block_group);
 		if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
 			percpu_counter_sub(&sbi->s_freeclusters_counter,
@@ -442,14 +441,16 @@ ext4_read_block_bitmap_nowait(struct sup
 	}
 	ext4_lock_group(sb, block_group);
 	if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
-
 		err = ext4_init_block_bitmap(sb, bh, block_group, desc);
 		set_bitmap_uptodate(bh);
 		set_buffer_uptodate(bh);
 		ext4_unlock_group(sb, block_group);
 		unlock_buffer(bh);
-		if (err)
+		if (err) {
+			ext4_error(sb, "Failed to init block bitmap for group "
+				   "%u: %d", block_group, err);
 			goto out;
+		}
 		goto verify;
 	}
 	ext4_unlock_group(sb, block_group);
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -76,7 +76,6 @@ static int ext4_init_inode_bitmap(struct
 	/* If checksum is bad mark all blocks and inodes use to prevent
 	 * allocation, essentially implementing a per-group read-only flag. */
 	if (!ext4_group_desc_csum_verify(sb, block_group, gdp)) {
-		ext4_error(sb, "Checksum bad for group %u", block_group);
 		grp = ext4_get_group_info(sb, block_group);
 		if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
 			percpu_counter_sub(&sbi->s_freeclusters_counter,
@@ -191,8 +190,11 @@ ext4_read_inode_bitmap(struct super_bloc
 		set_buffer_verified(bh);
 		ext4_unlock_group(sb, block_group);
 		unlock_buffer(bh);
-		if (err)
+		if (err) {
+			ext4_error(sb, "Failed to init inode bitmap for group "
+				   "%u: %d", block_group, err);
 			goto out;
+		}
 		return bh;
 	}
 	ext4_unlock_group(sb, block_group);

[PATCH 4.4 019/137] ext4: fix potential integer overflow

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Insu Yun <wuninsu@gmail.com>

commit 46901760b46064964b41015d00c140c83aa05bcf upstream.

Since sizeof(ext_new_group_data) > sizeof(ext_new_flex_group_data),
integer overflow could be happened.
Therefore, need to fix integer overflow sanitization.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/resize.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -198,7 +198,7 @@ static struct ext4_new_flex_group_data *
 	if (flex_gd == NULL)
 		goto out3;
 
-	if (flexbg_size >= UINT_MAX / sizeof(struct ext4_new_flex_group_data))
+	if (flexbg_size >= UINT_MAX / sizeof(struct ext4_new_group_data))
 		goto out2;
 	flex_gd->count = flexbg_size;
 

[PATCH 4.4 020/137] ext4: dont read blocks from disk after extents being swapped

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eryu Guan <guaneryu@gmail.com>

commit bcff24887d00bce102e0857d7b0a8c44a40f53d1 upstream.

I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.

The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned.  At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.

This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:

    mnt=/mnt/ext4
    donorfile=$mnt/donor
    testfile=$mnt/testfile
    e4compact=~/xfstests/src/e4compact

    rm -f $donorfile $testfile

    # reserve space for donor file, written by 0xaa and sync to disk to
    # avoid EBUSY on EXT4_IOC_MOVE_EXT
    xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile

    # create test file written by 0xbb
    xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile

    # compute initial md5sum
    md5sum $testfile | tee md5sum.txt
    # drop cache, force e4compact to read data from disk
    echo 3 > /proc/sys/vm/drop_caches

    # test defrag
    echo "$testfile" | $e4compact -i -v -f $donorfile
    # check md5sum
    md5sum -c md5sum.txt

Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/move_extent.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -265,11 +265,12 @@ move_extent_per_page(struct file *o_filp
 	ext4_lblk_t orig_blk_offset, donor_blk_offset;
 	unsigned long blocksize = orig_inode->i_sb->s_blocksize;
 	unsigned int tmp_data_size, data_size, replaced_size;
-	int err2, jblocks, retries = 0;
+	int i, err2, jblocks, retries = 0;
 	int replaced_count = 0;
 	int from = data_offset_in_page << orig_inode->i_blkbits;
 	int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
 	struct super_block *sb = orig_inode->i_sb;
+	struct buffer_head *bh = NULL;
 
 	/*
 	 * It needs twice the amount of ordinary journal buffers because
@@ -380,8 +381,16 @@ data_copy:
 	}
 	/* Perform all necessary steps similar write_begin()/write_end()
 	 * but keeping in mind that i_size will not change */
-	*err = __block_write_begin(pagep[0], from, replaced_size,
-				   ext4_get_block);
+	if (!page_has_buffers(pagep[0]))
+		create_empty_buffers(pagep[0], 1 << orig_inode->i_blkbits, 0);
+	bh = page_buffers(pagep[0]);
+	for (i = 0; i < data_offset_in_page; i++)
+		bh = bh->b_this_page;
+	for (i = 0; i < block_len_in_page; i++) {
+		*err = ext4_get_block(orig_inode, orig_blk_offset + i, bh, 0);
+		if (*err < 0)
+			break;
+	}
 	if (!*err)
 		*err = block_commit_write(pagep[0], from, from + replaced_size);
 

[PATCH 4.4 021/137] btrfs: handle invalid num_stripes in sys_array

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.com>

commit f5cdedd73fa71b74dcc42f2a11a5735d89ce7c4f upstream.

We can handle the special case of num_stripes == 0 directly inside
btrfs_read_sys_array. The BUG_ON in btrfs_chunk_item_size is there to
catch other unhandled cases where we fail to validate external data.

A crafted or corrupted image crashes at mount time:

BTRFS: device fsid 9006933e-2a9a-44f0-917f-514252aeec2c devid 1 transid 7 /dev/loop0
BTRFS info (device loop0): disk space caching is enabled
BUG: failure at fs/btrfs/ctree.h:337/btrfs_chunk_item_size()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 313 Comm: mount Not tainted 4.2.5-00657-ge047887-dirty #25
Stack:
 637af890 60062489 602aeb2e 604192ba
 60387961 00000011 637af8a0 6038a835
 637af9c0 6038776b 634ef32b 00000000
Call Trace:
 [<6001c86d>] show_stack+0xfe/0x15b
 [<6038a835>] dump_stack+0x2a/0x2c
 [<6038776b>] panic+0x13e/0x2b3
 [<6020f099>] btrfs_read_sys_array+0x25d/0x2ff
 [<601cfbbe>] open_ctree+0x192d/0x27af
 [<6019c2c1>] btrfs_mount+0x8f5/0xb9a
 [<600bc9a7>] mount_fs+0x11/0xf3
 [<600d5167>] vfs_kern_mount+0x75/0x11a
 [<6019bcb0>] btrfs_mount+0x2e4/0xb9a
 [<600bc9a7>] mount_fs+0x11/0xf3
 [<600d5167>] vfs_kern_mount+0x75/0x11a
 [<600d710b>] do_mount+0xa35/0xbc9
 [<600d7557>] SyS_mount+0x95/0xc8
 [<6001e884>] handle_syscall+0x6b/0x8e

Reported-by: Jiri Slaby <jslaby@suse.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/volumes.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -6512,6 +6512,14 @@ int btrfs_read_sys_array(struct btrfs_ro
 				goto out_short_read;
 
 			num_stripes = btrfs_chunk_num_stripes(sb, chunk);
+			if (!num_stripes) {
+				printk(KERN_ERR
+	    "BTRFS: invalid number of stripes %u in sys_array at offset %u\n",
+					num_stripes, cur_offset);
+				ret = -EIO;
+				break;
+			}
+
 			len = btrfs_chunk_item_size(num_stripes);
 			if (cur_offset + len > array_size)
 				goto out_short_read;

[PATCH 4.4 022/137] Btrfs: fix fitrim discarding device area reserved for boot loaders use

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 8cdc7c5b00d945a3c823fc4277af304abb9cb43d upstream.

As of the 4.3 kernel release, the fitrim ioctl can now discard any region
of a disk that is not allocated to any chunk/block group, including the
first megabyte which is used for our primary superblock and by the boot
loader (grub for example).

Fix this by not allowing to trim/discard any region in the device starting
with an offset not greater than min(alloc_start_mount_option, 1Mb), just
as it was not possible before 4.3.

A reproducer test case for xfstests follows.

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      cd /
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1

  # Write to the [0, 64Kb[ and [68Kb, 1Mb[ ranges of the device. These ranges are
  # reserved for a boot loader to use (GRUB for example) and btrfs should never
  # use them - neither for allocating metadata/data nor should trim/discard them.
  # The range [64Kb, 68Kb[ is used for the primary superblock of the filesystem.
  $XFS_IO_PROG -c "pwrite -S 0xfd 0 64K" $SCRATCH_DEV | _filter_xfs_io
  $XFS_IO_PROG -c "pwrite -S 0xfd 68K 956K" $SCRATCH_DEV | _filter_xfs_io

  # Now mount the filesystem and perform a fitrim against it.
  _scratch_mount
  _require_batched_discard $SCRATCH_MNT
  $FSTRIM_PROG $SCRATCH_MNT

  # Now unmount the filesystem and verify the content of the ranges was not
  # modified (no trim/discard happened on them).
  _scratch_unmount
  echo "Content of the ranges [0, 64Kb] and [68Kb, 1Mb[ after fitrim:"
  od -t x1 -N $((64 * 1024)) $SCRATCH_DEV
  od -t x1 -j $((68 * 1024)) -N $((956 * 1024)) $SCRATCH_DEV

  status=0
  exit

Reported-by: Vincent Petry  <PVince81@yahoo.fr>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109341
Fixes: 499f377f49f0 (btrfs: iterate over unused chunk space in FITRIM)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/volumes.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1257,6 +1257,15 @@ int find_free_dev_extent_start(struct bt
 	int ret;
 	int slot;
 	struct extent_buffer *l;
+	u64 min_search_start;
+
+	/*
+	 * We don't want to overwrite the superblock on the drive nor any area
+	 * used by the boot loader (grub for example), so we make sure to start
+	 * at an offset of at least 1MB.
+	 */
+	min_search_start = max(root->fs_info->alloc_start, 1024ull * 1024);
+	search_start = max(search_start, min_search_start);
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -1397,18 +1406,9 @@ int find_free_dev_extent(struct btrfs_tr
 			 struct btrfs_device *device, u64 num_bytes,
 			 u64 *start, u64 *len)
 {
-	struct btrfs_root *root = device->dev_root;
-	u64 search_start;
-
 	/* FIXME use last free of some kind */
-
-	/*
-	 * we don't want to overwrite the superblock on the drive,
-	 * so we make sure to start at an offset of at least 1MB
-	 */
-	search_start = max(root->fs_info->alloc_start, 1024ull * 1024);
 	return find_free_dev_extent_start(trans->transaction, device,
-					  num_bytes, search_start, start, len);
+					  num_bytes, 0, start, len);
 }
 
 static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans,

[PATCH 4.4 023/137] Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.com>

commit 80ad623edd2d0ccb47d85357ee31c97e6c684e82 upstream.

This reverts commit 696249132158014d594896df3a81390616069c5c. The
cleaner thread can block freezing when there's a snapshot cleaning in
progress and the other threads get suspended first. From the logs
provided by Martin we're waiting for reading extent pages:

kernel: PM: Syncing filesystems ... done.
kernel: Freezing user space processes ... (elapsed 0.015 seconds) done.
kernel: Freezing remaining freezable tasks ...
kernel: Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0):
kernel: btrfs-cleaner   D ffff88033dd13bc0     0   152      2 0x00000000
kernel: ffff88032ebc2e00 ffff88032e750000 ffff88032e74fa50 7fffffffffffffff
kernel: ffffffff814a58df 0000000000000002 ffffea000934d580 ffffffff814a5451
kernel: 7fffffffffffffff ffffffff814a6e8f 0000000000000000 0000000000000020
kernel: Call Trace:
kernel: [<ffffffff814a58df>] ? bit_wait+0x2c/0x2c
kernel: [<ffffffff814a5451>] ? schedule+0x6f/0x7c
kernel: [<ffffffff814a6e8f>] ? schedule_timeout+0x2f/0xd8
kernel: [<ffffffff81076f94>] ? timekeeping_get_ns+0xa/0x2e
kernel: [<ffffffff81077603>] ? ktime_get+0x36/0x44
kernel: [<ffffffff814a4f6c>] ? io_schedule_timeout+0x94/0xf2
kernel: [<ffffffff814a4f6c>] ? io_schedule_timeout+0x94/0xf2
kernel: [<ffffffff814a590b>] ? bit_wait_io+0x2c/0x30
kernel: [<ffffffff814a5694>] ? __wait_on_bit+0x41/0x73
kernel: [<ffffffff8109eba8>] ? wait_on_page_bit+0x6d/0x72
kernel: [<ffffffff8105d718>] ? autoremove_wake_function+0x2a/0x2a
kernel: [<ffffffff811a02d7>] ? read_extent_buffer_pages+0x1bd/0x203
kernel: [<ffffffff8117d9e9>] ? free_root_pointers+0x4c/0x4c
kernel: [<ffffffff8117e831>] ? btree_read_extent_buffer_pages.constprop.57+0x5a/0xe9
kernel: [<ffffffff8117f4f3>] ? read_tree_block+0x2d/0x45
kernel: [<ffffffff8116782a>] ? read_block_for_search.isra.34+0x22a/0x26b
kernel: [<ffffffff811656c3>] ? btrfs_set_path_blocking+0x1e/0x4a
kernel: [<ffffffff8116919b>] ? btrfs_search_slot+0x648/0x736
kernel: [<ffffffff81170559>] ? btrfs_lookup_extent_info+0xb7/0x2c7
kernel: [<ffffffff81170ee5>] ? walk_down_proc+0x9c/0x1ae
kernel: [<ffffffff81171c9d>] ? walk_down_tree+0x40/0xa4
kernel: [<ffffffff8117375f>] ? btrfs_drop_snapshot+0x2da/0x664
kernel: [<ffffffff8104ff21>] ? finish_task_switch+0x126/0x167
kernel: [<ffffffff811850f8>] ? btrfs_clean_one_deleted_snapshot+0xa6/0xb0
kernel: [<ffffffff8117eaba>] ? cleaner_kthread+0x13e/0x17b
kernel: [<ffffffff8117e97c>] ? btrfs_item_end+0x33/0x33
kernel: [<ffffffff8104d256>] ? kthread+0x95/0x9d
kernel: [<ffffffff8104d1c1>] ? kthread_parkme+0x16/0x16
kernel: [<ffffffff814a7b5f>] ? ret_from_fork+0x3f/0x70
kernel: [<ffffffff8104d1c1>] ? kthread_parkme+0x16/0x16

As this affects a released kernel (4.4) we need a minimal fix for
stable kernels.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108361
Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/disk-io.c |    1 -
 1 file changed, 1 deletion(-)

--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1762,7 +1762,6 @@ static int cleaner_kthread(void *arg)
 	int again;
 	struct btrfs_trans_handle *trans;
 
-	set_freezable();
 	do {
 		again = 0;
 

[PATCH 4.4 025/137] Btrfs: fix invalid page accesses in extent_same (dedup) ioctl

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit e0bd70c67bf996b360f706b6c643000f2e384681 upstream.

In the extent_same ioctl we are getting the pages for the source and
target ranges and unlocking them immediately after, which is incorrect
because later we attempt to map them (with kmap_atomic) and access their
contents at btrfs_cmp_data(). When we do such access the pages might have
been relocated or removed from memory, which leads to an invalid memory
access. This issue is detected on a kernel with CONFIG_DEBUG_PAGEALLOC=y
which produces a trace like the following:

186736.677437] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[186736.680382] Modules linked in: btrfs dm_flakey dm_mod ppdev xor raid6_pq sha256_generic hmac drbg ansi_cprng acpi_cpufreq evdev sg aesni_intel aes_x86_64
parport_pc ablk_helper tpm_tis psmouse parport i2c_piix4 tpm cryptd i2c_core lrw processor button serio_raw pcspkr gf128mul glue_helper loop autofs4 ext4
crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last
unloaded: btrfs]
[186736.681319] CPU: 13 PID: 10222 Comm: duperemove Tainted: G        W       4.4.0-rc6-btrfs-next-18+ #1
[186736.681319] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[186736.681319] task: ffff880132600400 ti: ffff880362284000 task.ti: ffff880362284000
[186736.681319] RIP: 0010:[<ffffffff81264d00>]  [<ffffffff81264d00>] memcmp+0xb/0x22
[186736.681319] RSP: 0018:ffff880362287d70  EFLAGS: 00010287
[186736.681319] RAX: 000002c002468acf RBX: 0000000012345678 RCX: 0000000000000000
[186736.681319] RDX: 0000000000001000 RSI: 0005d129c5cf9000 RDI: 0005d129c5cf9000
[186736.681319] RBP: ffff880362287d70 R08: 0000000000000000 R09: 0000000000001000
[186736.681319] R10: ffff880000000000 R11: 0000000000000476 R12: 0000000000001000
[186736.681319] R13: ffff8802f91d4c88 R14: ffff8801f2a77830 R15: ffff880352e83e40
[186736.681319] FS:  00007f27b37fe700(0000) GS:ffff88043dda0000(0000) knlGS:0000000000000000
[186736.681319] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[186736.681319] CR2: 00007f27a406a000 CR3: 0000000217421000 CR4: 00000000001406e0
[186736.681319] Stack:
[186736.681319]  ffff880362287ea0 ffffffffa048d0bd 000000000009f000 0000000000001000
[186736.681319]  0100000000000000 ffff8801f2a77850 ffff8802f91d49b0 ffff880132600400
[186736.681319]  00000000000004f8 ffff8801c1efbe41 0000000000000000 0000000000000038
[186736.681319] Call Trace:
[186736.681319]  [<ffffffffa048d0bd>] btrfs_ioctl+0x24cb/0x2731 [btrfs]
[186736.681319]  [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[186736.681319]  [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[186736.681319]  [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[186736.681319]  [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[186736.681319]  [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[186736.681319]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[186736.681319] Code: 0a 3c 6e 74 0d 3c 79 74 04 3c 59 75 0c c6 06 01 eb 03 c6 06 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 31 c9 48 89 e5 48 39 d1 74 13 <0f> b6
04 0f 44 0f b6 04 0e 48 ff c1 44 29 c0 74 ea eb 02 31 c0

(gdb) list *(btrfs_ioctl+0x24cb)
0x5e0e1 is in btrfs_ioctl (fs/btrfs/ioctl.c:2972).
2967                    dst_addr = kmap_atomic(dst_page);
2968
2969                    flush_dcache_page(src_page);
2970                    flush_dcache_page(dst_page);
2971
2972                    if (memcmp(addr, dst_addr, cmp_len))
2973                            ret = BTRFS_SAME_DATA_DIFFERS;
2974
2975                    kunmap_atomic(addr);
2976                    kunmap_atomic(dst_addr);

So fix this by making sure we keep the pages locked and respect the same
locking order as everywhere else: get and lock the pages first and then
lock the range in the inode's io tree (like for example at
__btrfs_buffered_write() and extent_readpages()). If an ordered extent
is found after locking the range in the io tree, unlock the range,
unlock the pages, wait for the ordered extent to complete and repeat the
entire locking process until no overlapping ordered extents are found.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ioctl.c |   90 ++++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 76 insertions(+), 14 deletions(-)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2799,7 +2799,6 @@ static struct page *extent_same_get_page
 			return NULL;
 		}
 	}
-	unlock_page(page);
 
 	return page;
 }
@@ -2818,10 +2817,17 @@ static int gather_extent_pages(struct in
 	return 0;
 }
 
-static inline void lock_extent_range(struct inode *inode, u64 off, u64 len)
+static int lock_extent_range(struct inode *inode, u64 off, u64 len,
+			     bool retry_range_locking)
 {
-	/* do any pending delalloc/csum calc on src, one way or
-	   another, and lock file content */
+	/*
+	 * Do any pending delalloc/csum calculations on inode, one way or
+	 * another, and lock file content.
+	 * The locking order is:
+	 *
+	 *   1) pages
+	 *   2) range in the inode's io tree
+	 */
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
 		lock_extent(&BTRFS_I(inode)->io_tree, off, off + len - 1);
@@ -2839,8 +2845,11 @@ static inline void lock_extent_range(str
 		unlock_extent(&BTRFS_I(inode)->io_tree, off, off + len - 1);
 		if (ordered)
 			btrfs_put_ordered_extent(ordered);
+		if (!retry_range_locking)
+			return -EAGAIN;
 		btrfs_wait_ordered_range(inode, off, len);
 	}
+	return 0;
 }
 
 static void btrfs_double_inode_unlock(struct inode *inode1, struct inode *inode2)
@@ -2865,15 +2874,24 @@ static void btrfs_double_extent_unlock(s
 	unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
 }
 
-static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1,
-				     struct inode *inode2, u64 loff2, u64 len)
+static int btrfs_double_extent_lock(struct inode *inode1, u64 loff1,
+				    struct inode *inode2, u64 loff2, u64 len,
+				    bool retry_range_locking)
 {
+	int ret;
+
 	if (inode1 < inode2) {
 		swap(inode1, inode2);
 		swap(loff1, loff2);
 	}
-	lock_extent_range(inode1, loff1, len);
-	lock_extent_range(inode2, loff2, len);
+	ret = lock_extent_range(inode1, loff1, len, retry_range_locking);
+	if (ret)
+		return ret;
+	ret = lock_extent_range(inode2, loff2, len, retry_range_locking);
+	if (ret)
+		unlock_extent(&BTRFS_I(inode1)->io_tree, loff1,
+			      loff1 + len - 1);
+	return ret;
 }
 
 struct cmp_pages {
@@ -2889,11 +2907,15 @@ static void btrfs_cmp_data_free(struct c
 
 	for (i = 0; i < cmp->num_pages; i++) {
 		pg = cmp->src_pages[i];
-		if (pg)
+		if (pg) {
+			unlock_page(pg);
 			page_cache_release(pg);
+		}
 		pg = cmp->dst_pages[i];
-		if (pg)
+		if (pg) {
+			unlock_page(pg);
 			page_cache_release(pg);
+		}
 	}
 	kfree(cmp->src_pages);
 	kfree(cmp->dst_pages);
@@ -2954,6 +2976,8 @@ static int btrfs_cmp_data(struct inode *
 
 		src_page = cmp->src_pages[i];
 		dst_page = cmp->dst_pages[i];
+		ASSERT(PageLocked(src_page));
+		ASSERT(PageLocked(dst_page));
 
 		addr = kmap_atomic(src_page);
 		dst_addr = kmap_atomic(dst_page);
@@ -3066,14 +3090,46 @@ static int btrfs_extent_same(struct inod
 		goto out_unlock;
 	}
 
+again:
 	ret = btrfs_cmp_data_prepare(src, loff, dst, dst_loff, olen, &cmp);
 	if (ret)
 		goto out_unlock;
 
 	if (same_inode)
-		lock_extent_range(src, same_lock_start, same_lock_len);
+		ret = lock_extent_range(src, same_lock_start, same_lock_len,
+					false);
 	else
-		btrfs_double_extent_lock(src, loff, dst, dst_loff, len);
+		ret = btrfs_double_extent_lock(src, loff, dst, dst_loff, len,
+					       false);
+	/*
+	 * If one of the inodes has dirty pages in the respective range or
+	 * ordered extents, we need to flush dellaloc and wait for all ordered
+	 * extents in the range. We must unlock the pages and the ranges in the
+	 * io trees to avoid deadlocks when flushing delalloc (requires locking
+	 * pages) and when waiting for ordered extents to complete (they require
+	 * range locking).
+	 */
+	if (ret == -EAGAIN) {
+		/*
+		 * Ranges in the io trees already unlocked. Now unlock all
+		 * pages before waiting for all IO to complete.
+		 */
+		btrfs_cmp_data_free(&cmp);
+		if (same_inode) {
+			btrfs_wait_ordered_range(src, same_lock_start,
+						 same_lock_len);
+		} else {
+			btrfs_wait_ordered_range(src, loff, len);
+			btrfs_wait_ordered_range(dst, dst_loff, len);
+		}
+		goto again;
+	}
+	ASSERT(ret == 0);
+	if (WARN_ON(ret)) {
+		/* ranges in the io trees already unlocked */
+		btrfs_cmp_data_free(&cmp);
+		return ret;
+	}
 
 	/* pass original length for comparison so we stay within i_size */
 	ret = btrfs_cmp_data(src, loff, dst, dst_loff, olen, &cmp);
@@ -3895,9 +3951,15 @@ static noinline long btrfs_ioctl_clone(s
 		u64 lock_start = min_t(u64, off, destoff);
 		u64 lock_len = max_t(u64, off, destoff) + len - lock_start;
 
-		lock_extent_range(src, lock_start, lock_len);
+		ret = lock_extent_range(src, lock_start, lock_len, true);
 	} else {
-		btrfs_double_extent_lock(src, off, inode, destoff, len);
+		ret = btrfs_double_extent_lock(src, off, inode, destoff, len,
+					       true);
+	}
+	ASSERT(ret == 0);
+	if (WARN_ON(ret)) {
+		/* ranges in the io trees already unlocked */
+		goto out_unlock;
 	}
 
 	ret = btrfs_clone(src, inode, off, olen, len, destoff, 0);

[PATCH 4.4 026/137] Btrfs: fix page reading in extent_same ioctl leading to csum errors

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 313140023026ae542ad76e7e268c56a1eaa2c28e upstream.

In the extent_same ioctl, we were grabbing the pages (locked) and
attempting to read them without bothering about any concurrent IO
against them. That is, we were not checking for any ongoing ordered
extents nor waiting for them to complete, which leads to a race where
the extent_same() code gets a checksum verification error when it
reads the pages, producing a message like the following in dmesg
and making the operation fail to user space with -ENOMEM:

[18990.161265] BTRFS warning (device sdc): csum failed ino 259 off 495616 csum 685204116 expected csum 1515870868

Fix this by using btrfs_readpage() for reading the pages instead of
extent_read_full_page_nolock(), which waits for any concurrent ordered
extents to complete and locks the io range. Also do better error handling
and don't treat all failures as -ENOMEM, as that's clearly misleasing,
becoming identical to the checks and operation of prepare_uptodate_page().

The use of extent_read_full_page_nolock() was required before
commit f441460202cb ("btrfs: fix deadlock with extent-same and readpage"),
as we had the range locked in an inode's io tree before attempting to
read the pages.

Fixes: f441460202cb ("btrfs: fix deadlock with extent-same and readpage")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ioctl.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2782,21 +2782,27 @@ out:
 static struct page *extent_same_get_page(struct inode *inode, pgoff_t index)
 {
 	struct page *page;
-	struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
 
 	page = grab_cache_page(inode->i_mapping, index);
 	if (!page)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	if (!PageUptodate(page)) {
-		if (extent_read_full_page_nolock(tree, page, btrfs_get_extent,
-						 0))
-			return NULL;
+		int ret;
+
+		ret = btrfs_readpage(NULL, page);
+		if (ret)
+			return ERR_PTR(ret);
 		lock_page(page);
 		if (!PageUptodate(page)) {
 			unlock_page(page);
 			page_cache_release(page);
-			return NULL;
+			return ERR_PTR(-EIO);
+		}
+		if (page->mapping != inode->i_mapping) {
+			unlock_page(page);
+			page_cache_release(page);
+			return ERR_PTR(-EAGAIN);
 		}
 	}
 
@@ -2810,9 +2816,16 @@ static int gather_extent_pages(struct in
 	pgoff_t index = off >> PAGE_CACHE_SHIFT;
 
 	for (i = 0; i < num_pages; i++) {
+again:
 		pages[i] = extent_same_get_page(inode, index + i);
-		if (!pages[i])
-			return -ENOMEM;
+		if (IS_ERR(pages[i])) {
+			int err = PTR_ERR(pages[i]);
+
+			if (err == -EAGAIN)
+				goto again;
+			pages[i] = NULL;
+			return err;
+		}
 	}
 	return 0;
 }

[PATCH 4.4 027/137] Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 0c0fe3b0fa45082cd752553fdb3a4b42503a118e upstream.

While doing some tests I ran into an hang on an extent buffer's rwlock
that produced the following trace:

[39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166]
[39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165]
[39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[39389.800016] irq event stamp: 0
[39389.800016] hardirqs last  enabled at (0): [<          (null)>]           (null)
[39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800016] softirqs last  enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800016] softirqs last disabled at (0): [<          (null)>]           (null)
[39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000
[39389.800016] RIP: 0010:[<ffffffff810902af>]  [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158
[39389.800016] RSP: 0018:ffff8800a185fb80  EFLAGS: 00000202
[39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101
[39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001
[39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000
[39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98
[39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40
[39389.800016] FS:  00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000
[39389.800016] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0
[39389.800016] Stack:
[39389.800016]  ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0
[39389.800016]  ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895
[39389.800016]  ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c
[39389.800016] Call Trace:
[39389.800016]  [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60
[39389.800016]  [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41
[39389.800016]  [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44
[39389.800016]  [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs]
[39389.800016]  [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs]
[39389.800016]  [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs]
[39389.800016]  [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs]
[39389.800016]  [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs]
[39389.800016]  [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs]
[39389.800016]  [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs]
[39389.800016]  [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800016]  [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15
[39389.800016]  [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800016]  [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[39389.800016]  [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[39389.800016]  [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[39389.800016]  [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[39389.800016]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8
[39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[39389.800012] irq event stamp: 0
[39389.800012] hardirqs last  enabled at (0): [<          (null)>]           (null)
[39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800012] softirqs last  enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800012] softirqs last disabled at (0): [<          (null)>]           (null)
[39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G             L  4.4.0-rc6-btrfs-next-18+ #1
[39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000
[39389.800012] RIP: 0010:[<ffffffff81091e8d>]  [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72
[39389.800012] RSP: 0018:ffff880034a639f0  EFLAGS: 00000206
[39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000
[39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c
[39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000
[39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98
[39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00
[39389.800012] FS:  00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000
[39389.800012] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0
[39389.800012] Stack:
[39389.800012]  ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98
[39389.800012]  ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00
[39389.800012]  ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58
[39389.800012] Call Trace:
[39389.800012]  [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c
[39389.800012]  [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41
[39389.800012]  [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs]
[39389.800012]  [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs]
[39389.800012]  [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs]
[39389.800012]  [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs]
[39389.800012]  [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs]
[39389.800012]  [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs]
[39389.800012]  [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28
[39389.800012]  [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs]
[39389.800012]  [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf
[39389.800012]  [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc
[39389.800012]  [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs]
[39389.800012]  [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs]
[39389.800012]  [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44
[39389.800012]  [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs]
[39389.800012]  [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs]
[39389.800012]  [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs]
[39389.800012]  [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[39389.800012]  [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs]
[39389.800012]  [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800012]  [<ffffffff81140261>] ? __might_fault+0x4c/0xa7
[39389.800012]  [<ffffffff81140261>] ? __might_fault+0x4c/0xa7
[39389.800012]  [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800012]  [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[39389.800012]  [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[39389.800012]  [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[39389.800012]  [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[39389.800012]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00

This happens because in the code path executed by the inode_paths ioctl we
end up nesting two calls to read lock a leaf's rwlock when after the first
call to read_lock() and before the second call to read_lock(), another
task (running the delayed items as part of a transaction commit) has
already called write_lock() against the leaf's rwlock. This situation is
illustrated by the following diagram:

         Task A                       Task B

  btrfs_ref_to_path()               btrfs_commit_transaction()
    read_lock(&eb->lock);

                                      btrfs_run_delayed_items()
                                        __btrfs_commit_inode_delayed_items()
                                          __btrfs_update_delayed_inode()
                                            btrfs_lookup_inode()

                                              write_lock(&eb->lock);
                                                --> task waits for lock

    read_lock(&eb->lock);
    --> makes this task hang
        forever (and task B too
	of course)

So fix this by avoiding doing the nested read lock, which is easily
avoidable. This issue does not happen if task B calls write_lock() after
task A does the second call to read_lock(), however there does not seem
to exist anything in the documentation that mentions what is the expected
behaviour for recursive locking of rwlocks (leaving the idea that doing
so is not a good usage of rwlocks).

Also, as a side effect necessary for this fix, make sure we do not
needlessly read lock extent buffers when the input path has skip_locking
set (used when called from send).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/backref.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1417,7 +1417,8 @@ char *btrfs_ref_to_path(struct btrfs_roo
 			read_extent_buffer(eb, dest + bytes_left,
 					   name_off, name_len);
 		if (eb != eb_in) {
-			btrfs_tree_read_unlock_blocking(eb);
+			if (!path->skip_locking)
+				btrfs_tree_read_unlock_blocking(eb);
 			free_extent_buffer(eb);
 		}
 		ret = btrfs_find_item(fs_root, path, parent, 0,
@@ -1437,9 +1438,10 @@ char *btrfs_ref_to_path(struct btrfs_roo
 		eb = path->nodes[0];
 		/* make sure we can use eb after releasing the path */
 		if (eb != eb_in) {
-			atomic_inc(&eb->refs);
-			btrfs_tree_read_lock(eb);
-			btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+			if (!path->skip_locking)
+				btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+			path->nodes[0] = NULL;
+			path->locks[0] = 0;
 		}
 		btrfs_release_path(path);
 		iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);

[PATCH 4.4 028/137] Btrfs: fix direct IO requests not reporting IO error to user space

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 1636d1d77ef4e01e57f706a4cae3371463896136 upstream.

If a bio for a direct IO request fails, we were not setting the error in
the parent bio (the main DIO bio), making us not return the error to
user space in btrfs_direct_IO(), that is, it made __blockdev_direct_IO()
return the number of bytes issued for IO and not the error a bio created
and submitted by btrfs_submit_direct() got from the block layer.
This essentially happens because when we call:

   dio_end_io(dio_bio, bio->bi_error);

It does not set dio_bio->bi_error to the value of the second argument.
So just add this missing assignment in endio callbacks, just as we do in
the error path at btrfs_submit_direct() when we fail to clone the dio bio
or allocate its private object. This follows the convention of what is
done with other similar APIs such as bio_endio() where the caller is
responsible for setting the bi_error field in the bio it passes as an
argument to bio_endio().

This was detected by the new generic test cases in xfstests: 271, 272,
276 and 278. Which essentially setup a dm error target, then load the
error table, do a direct IO write and unload the error table. They
expect the write to fail with -EIO, which was not getting reported
when testing against btrfs.

Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -7997,6 +7997,7 @@ static void btrfs_endio_direct_read(stru
 
 	kfree(dip);
 
+	dio_bio->bi_error = bio->bi_error;
 	dio_end_io(dio_bio, bio->bi_error);
 
 	if (io_bio->end_io)
@@ -8042,6 +8043,7 @@ out_test:
 
 	kfree(dip);
 
+	dio_bio->bi_error = bio->bi_error;
 	dio_end_io(dio_bio, bio->bi_error);
 	bio_put(bio);
 }

[PATCH 4.4 029/137] ptrace: use fsuid, fsgid, effective creds for fs access checks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jann@thejh.net>

commit caaee6234d05a58c5b4d05e7bf766131b810a657 upstream.

By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.

To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.

The problem was that when a privileged task had temporarily dropped its
privileges, e.g.  by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.

While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.

In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:

 /proc/$pid/stat - uses the check for determining whether pointers
     should be visible, useful for bypassing ASLR
 /proc/$pid/maps - also useful for bypassing ASLR
 /proc/$pid/cwd - useful for gaining access to restricted
     directories that contain files with lax permissions, e.g. in
     this scenario:
     lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
     drwx------ root root /root
     drwxr-xr-x root root /root/foobar
     -rw-r--r-- root root /root/foobar/secret

Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/array.c        |    2 +-
 fs/proc/base.c         |   21 +++++++++++----------
 fs/proc/namespaces.c   |    4 ++--
 include/linux/ptrace.h |   24 +++++++++++++++++++++++-
 kernel/events/core.c   |    2 +-
 kernel/futex.c         |    2 +-
 kernel/futex_compat.c  |    2 +-
 kernel/kcmp.c          |    4 ++--
 kernel/ptrace.c        |   39 +++++++++++++++++++++++++++++++--------
 mm/process_vm_access.c |    2 +-
 security/commoncap.c   |    7 ++++++-
 11 files changed, 80 insertions(+), 29 deletions(-)

--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -395,7 +395,7 @@ static int do_task_stat(struct seq_file
 
 	state = *get_task_state(task);
 	vsize = eip = esp = 0;
-	permitted = ptrace_may_access(task, PTRACE_MODE_READ | PTRACE_MODE_NOAUDIT);
+	permitted = ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS | PTRACE_MODE_NOAUDIT);
 	mm = get_task_mm(task);
 	if (mm) {
 		vsize = task_vsize(mm);
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -403,7 +403,7 @@ static const struct file_operations proc
 static int proc_pid_auxv(struct seq_file *m, struct pid_namespace *ns,
 			 struct pid *pid, struct task_struct *task)
 {
-	struct mm_struct *mm = mm_access(task, PTRACE_MODE_READ);
+	struct mm_struct *mm = mm_access(task, PTRACE_MODE_READ_FSCREDS);
 	if (mm && !IS_ERR(mm)) {
 		unsigned int nwords = 0;
 		do {
@@ -430,7 +430,8 @@ static int proc_pid_wchan(struct seq_fil
 
 	wchan = get_wchan(task);
 
-	if (wchan && ptrace_may_access(task, PTRACE_MODE_READ) && !lookup_symbol_name(wchan, symname))
+	if (wchan && ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)
+			&& !lookup_symbol_name(wchan, symname))
 		seq_printf(m, "%s", symname);
 	else
 		seq_putc(m, '0');
@@ -444,7 +445,7 @@ static int lock_trace(struct task_struct
 	int err = mutex_lock_killable(&task->signal->cred_guard_mutex);
 	if (err)
 		return err;
-	if (!ptrace_may_access(task, PTRACE_MODE_ATTACH)) {
+	if (!ptrace_may_access(task, PTRACE_MODE_ATTACH_FSCREDS)) {
 		mutex_unlock(&task->signal->cred_guard_mutex);
 		return -EPERM;
 	}
@@ -697,7 +698,7 @@ static int proc_fd_access_allowed(struct
 	 */
 	task = get_proc_task(inode);
 	if (task) {
-		allowed = ptrace_may_access(task, PTRACE_MODE_READ);
+		allowed = ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
 		put_task_struct(task);
 	}
 	return allowed;
@@ -732,7 +733,7 @@ static bool has_pid_permissions(struct p
 		return true;
 	if (in_group_p(pid->pid_gid))
 		return true;
-	return ptrace_may_access(task, PTRACE_MODE_READ);
+	return ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
 }
 
 
@@ -809,7 +810,7 @@ struct mm_struct *proc_mem_open(struct i
 	struct mm_struct *mm = ERR_PTR(-ESRCH);
 
 	if (task) {
-		mm = mm_access(task, mode);
+		mm = mm_access(task, mode | PTRACE_MODE_FSCREDS);
 		put_task_struct(task);
 
 		if (!IS_ERR_OR_NULL(mm)) {
@@ -1856,7 +1857,7 @@ static int map_files_d_revalidate(struct
 	if (!task)
 		goto out_notask;
 
-	mm = mm_access(task, PTRACE_MODE_READ);
+	mm = mm_access(task, PTRACE_MODE_READ_FSCREDS);
 	if (IS_ERR_OR_NULL(mm))
 		goto out;
 
@@ -2007,7 +2008,7 @@ static struct dentry *proc_map_files_loo
 		goto out;
 
 	result = -EACCES;
-	if (!ptrace_may_access(task, PTRACE_MODE_READ))
+	if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
 		goto out_put_task;
 
 	result = -ENOENT;
@@ -2060,7 +2061,7 @@ proc_map_files_readdir(struct file *file
 		goto out;
 
 	ret = -EACCES;
-	if (!ptrace_may_access(task, PTRACE_MODE_READ))
+	if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
 		goto out_put_task;
 
 	ret = 0;
@@ -2530,7 +2531,7 @@ static int do_io_accounting(struct task_
 	if (result)
 		return result;
 
-	if (!ptrace_may_access(task, PTRACE_MODE_READ)) {
+	if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) {
 		result = -EACCES;
 		goto out_unlock;
 	}
--- a/fs/proc/namespaces.c
+++ b/fs/proc/namespaces.c
@@ -42,7 +42,7 @@ static const char *proc_ns_follow_link(s
 	if (!task)
 		return error;
 
-	if (ptrace_may_access(task, PTRACE_MODE_READ)) {
+	if (ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) {
 		error = ns_get_path(&ns_path, task, ns_ops);
 		if (!error)
 			nd_jump_link(&ns_path);
@@ -63,7 +63,7 @@ static int proc_ns_readlink(struct dentr
 	if (!task)
 		return res;
 
-	if (ptrace_may_access(task, PTRACE_MODE_READ)) {
+	if (ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) {
 		res = ns_get_name(name, sizeof(name), task, ns_ops);
 		if (res >= 0)
 			res = readlink_copy(buffer, buflen, name);
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -57,7 +57,29 @@ extern void exit_ptrace(struct task_stru
 #define PTRACE_MODE_READ	0x01
 #define PTRACE_MODE_ATTACH	0x02
 #define PTRACE_MODE_NOAUDIT	0x04
-/* Returns true on success, false on denial. */
+#define PTRACE_MODE_FSCREDS 0x08
+#define PTRACE_MODE_REALCREDS 0x10
+
+/* shorthands for READ/ATTACH and FSCREDS/REALCREDS combinations */
+#define PTRACE_MODE_READ_FSCREDS (PTRACE_MODE_READ | PTRACE_MODE_FSCREDS)
+#define PTRACE_MODE_READ_REALCREDS (PTRACE_MODE_READ | PTRACE_MODE_REALCREDS)
+#define PTRACE_MODE_ATTACH_FSCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_FSCREDS)
+#define PTRACE_MODE_ATTACH_REALCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_REALCREDS)
+
+/**
+ * ptrace_may_access - check whether the caller is permitted to access
+ * a target task.
+ * @task: target task
+ * @mode: selects type of access and caller credentials
+ *
+ * Returns true on success, false on denial.
+ *
+ * One of the flags PTRACE_MODE_FSCREDS and PTRACE_MODE_REALCREDS must
+ * be set in @mode to specify whether the access was requested through
+ * a filesystem syscall (should use effective capabilities and fsuid
+ * of the caller) or through an explicit syscall such as
+ * process_vm_writev or ptrace (and should use the real credentials).
+ */
 extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
 
 static inline int ptrace_reparented(struct task_struct *child)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3434,7 +3434,7 @@ find_lively_task_by_vpid(pid_t vpid)
 
 	/* Reuse ptrace permission checks for now. */
 	err = -EACCES;
-	if (!ptrace_may_access(task, PTRACE_MODE_READ))
+	if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS))
 		goto errout;
 
 	return task;
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2881,7 +2881,7 @@ SYSCALL_DEFINE3(get_robust_list, int, pi
 	}
 
 	ret = -EPERM;
-	if (!ptrace_may_access(p, PTRACE_MODE_READ))
+	if (!ptrace_may_access(p, PTRACE_MODE_READ_REALCREDS))
 		goto err_unlock;
 
 	head = p->robust_list;
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -155,7 +155,7 @@ COMPAT_SYSCALL_DEFINE3(get_robust_list,
 	}
 
 	ret = -EPERM;
-	if (!ptrace_may_access(p, PTRACE_MODE_READ))
+	if (!ptrace_may_access(p, PTRACE_MODE_READ_REALCREDS))
 		goto err_unlock;
 
 	head = p->compat_robust_list;
--- a/kernel/kcmp.c
+++ b/kernel/kcmp.c
@@ -122,8 +122,8 @@ SYSCALL_DEFINE5(kcmp, pid_t, pid1, pid_t
 			&task2->signal->cred_guard_mutex);
 	if (ret)
 		goto err;
-	if (!ptrace_may_access(task1, PTRACE_MODE_READ) ||
-	    !ptrace_may_access(task2, PTRACE_MODE_READ)) {
+	if (!ptrace_may_access(task1, PTRACE_MODE_READ_REALCREDS) ||
+	    !ptrace_may_access(task2, PTRACE_MODE_READ_REALCREDS)) {
 		ret = -EPERM;
 		goto err_unlock;
 	}
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -219,6 +219,14 @@ static int ptrace_has_cap(struct user_na
 static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
 {
 	const struct cred *cred = current_cred(), *tcred;
+	int dumpable = 0;
+	kuid_t caller_uid;
+	kgid_t caller_gid;
+
+	if (!(mode & PTRACE_MODE_FSCREDS) == !(mode & PTRACE_MODE_REALCREDS)) {
+		WARN(1, "denying ptrace access check without PTRACE_MODE_*CREDS\n");
+		return -EPERM;
+	}
 
 	/* May we inspect the given task?
 	 * This check is used both for attaching with ptrace
@@ -228,18 +236,33 @@ static int __ptrace_may_access(struct ta
 	 * because setting up the necessary parent/child relationship
 	 * or halting the specified task is impossible.
 	 */
-	int dumpable = 0;
+
 	/* Don't let security modules deny introspection */
 	if (same_thread_group(task, current))
 		return 0;
 	rcu_read_lock();
+	if (mode & PTRACE_MODE_FSCREDS) {
+		caller_uid = cred->fsuid;
+		caller_gid = cred->fsgid;
+	} else {
+		/*
+		 * Using the euid would make more sense here, but something
+		 * in userland might rely on the old behavior, and this
+		 * shouldn't be a security problem since
+		 * PTRACE_MODE_REALCREDS implies that the caller explicitly
+		 * used a syscall that requests access to another process
+		 * (and not a filesystem syscall to procfs).
+		 */
+		caller_uid = cred->uid;
+		caller_gid = cred->gid;
+	}
 	tcred = __task_cred(task);
-	if (uid_eq(cred->uid, tcred->euid) &&
-	    uid_eq(cred->uid, tcred->suid) &&
-	    uid_eq(cred->uid, tcred->uid)  &&
-	    gid_eq(cred->gid, tcred->egid) &&
-	    gid_eq(cred->gid, tcred->sgid) &&
-	    gid_eq(cred->gid, tcred->gid))
+	if (uid_eq(caller_uid, tcred->euid) &&
+	    uid_eq(caller_uid, tcred->suid) &&
+	    uid_eq(caller_uid, tcred->uid)  &&
+	    gid_eq(caller_gid, tcred->egid) &&
+	    gid_eq(caller_gid, tcred->sgid) &&
+	    gid_eq(caller_gid, tcred->gid))
 		goto ok;
 	if (ptrace_has_cap(tcred->user_ns, mode))
 		goto ok;
@@ -306,7 +329,7 @@ static int ptrace_attach(struct task_str
 		goto out;
 
 	task_lock(task);
-	retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH);
+	retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS);
 	task_unlock(task);
 	if (retval)
 		goto unlock_creds;
--- a/mm/process_vm_access.c
+++ b/mm/process_vm_access.c
@@ -194,7 +194,7 @@ static ssize_t process_vm_rw_core(pid_t
 		goto free_proc_pages;
 	}
 
-	mm = mm_access(task, PTRACE_MODE_ATTACH);
+	mm = mm_access(task, PTRACE_MODE_ATTACH_REALCREDS);
 	if (!mm || IS_ERR(mm)) {
 		rc = IS_ERR(mm) ? PTR_ERR(mm) : -ESRCH;
 		/*
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -137,12 +137,17 @@ int cap_ptrace_access_check(struct task_
 {
 	int ret = 0;
 	const struct cred *cred, *child_cred;
+	const kernel_cap_t *caller_caps;
 
 	rcu_read_lock();
 	cred = current_cred();
 	child_cred = __task_cred(child);
+	if (mode & PTRACE_MODE_FSCREDS)
+		caller_caps = &cred->cap_effective;
+	else
+		caller_caps = &cred->cap_permitted;
 	if (cred->user_ns == child_cred->user_ns &&
-	    cap_issubset(child_cred->cap_permitted, cred->cap_permitted))
+	    cap_issubset(child_cred->cap_permitted, *caller_caps))
 		goto out;
 	if (ns_capable(child_cred->user_ns, CAP_SYS_PTRACE))
 		goto out;

[PATCH 4.4 030/137] tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <rostedt@goodmis.org>

commit 32abc2ede536aae52978d6c0a8944eb1df14f460 upstream.

When a long value is read on 32 bit machines for 64 bit output, the
parsing needs to change "%lu" into "%llu", as the value is read
natively.

Unfortunately, if "%llu" is already there, the code will add another "l"
to it and fail to parse it properly.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20151116172516.4b79b109@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/lib/traceevent/event-parse.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -4968,13 +4968,12 @@ static void pretty_print(struct trace_se
 				    sizeof(long) != 8) {
 					char *p;
 
-					ls = 2;
 					/* make %l into %ll */
-					p = strchr(format, 'l');
-					if (p)
+					if (ls == 1 && (p = strchr(format, 'l')))
 						memmove(p+1, p, strlen(p)+1);
 					else if (strcmp(format, "%p") == 0)
 						strcpy(format, "0x%llx");
+					ls = 2;
 				}
 				switch (ls) {
 				case -2:

[PATCH 4.4 031/137] perf tools: tracepoint_error() can receive e=NULL, robustify it

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit ec183d22cc284a7a1e17f0341219d8ec8ca070cc upstream.

Fixes segmentation fault using, for instance:

  (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".

 Program received signal SIGSEGV, Segmentation fault.
  0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  (gdb) bt
  #0  0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  #1  0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:433
  #2  0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:498
  #3  0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:936
  #4  0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
  #5  0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
  #6  0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
  #7  0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
  #8  0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
  #9  0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
  #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
  #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
  #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
  #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
  #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
  #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)

Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints.  Fix by checking before using.

Committer note:

This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.

Further info from a similar patch by Wang:

The error is in tracepoint_error: it assumes the 'e' parameter is valid.

However, there are many situation a parse_event() can be called without
parse_events_error. See result of

  $ grep 'parse_events(.*NULL)' ./tools/perf/ -r'

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 196581717d85 ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/parse-events.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -399,6 +399,9 @@ static void tracepoint_error(struct pars
 {
 	char help[BUFSIZ];
 
+	if (!e)
+		return;
+
 	/*
 	 * We get error directly from syscall errno ( > 0),
 	 * or from encoded pointer's error ( < 0).

[PATCH 4.4 032/137] tracing: Fix freak link error caused by branch tracer

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit b33c8ff4431a343561e2319f17c14286f2aa52e2 upstream.

In my randconfig tests, I came across a bug that involves several
components:

* gcc-4.9 through at least 5.3
* CONFIG_GCOV_PROFILE_ALL enabling -fprofile-arcs for all files
* CONFIG_PROFILE_ALL_BRANCHES overriding every if()
* The optimized implementation of do_div() that tries to
  replace a library call with an division by multiplication
* code in drivers/media/dvb-frontends/zl10353.c doing

        u32 adc_clock = 450560; /* 45.056 MHz */
        if (state->config.adc_clock)
                adc_clock = state->config.adc_clock;
        do_div(value, adc_clock);

In this case, gcc fails to determine whether the divisor
in do_div() is __builtin_constant_p(). In particular, it
concludes that __builtin_constant_p(adc_clock) is false, while
__builtin_constant_p(!!adc_clock) is true.

That in turn throws off the logic in do_div() that also uses
__builtin_constant_p(), and instead of picking either the
constant- optimized division, and the code in ilog2() that uses
__builtin_constant_p() to figure out whether it knows the answer at
compile time. The result is a link error from failing to find
multiple symbols that should never have been called based on
the __builtin_constant_p():

dvb-frontends/zl10353.c:138: undefined reference to `____ilog2_NaN'
dvb-frontends/zl10353.c:138: undefined reference to `__aeabi_uldivmod'
ERROR: "____ilog2_NaN" [drivers/media/dvb-frontends/zl10353.ko] undefined!
ERROR: "__aeabi_uldivmod" [drivers/media/dvb-frontends/zl10353.ko] undefined!

This patch avoids the problem by changing __trace_if() to check
whether the condition is known at compile-time to be nonzero, rather
than checking whether it is actually a constant.

I see this one link error in roughly one out of 1600 randconfig builds
on ARM, and the patch fixes all known instances.

Link: http://lkml.kernel.org/r/1455312410-1058841-1-git-send-email-arnd@arndb.de

Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: ab3c9c686e22 ("branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compiler.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -144,7 +144,7 @@ void ftrace_likely_update(struct ftrace_
  */
 #define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) )
 #define __trace_if(cond) \
-	if (__builtin_constant_p((cond)) ? !!(cond) :			\
+	if (__builtin_constant_p(!!(cond)) ? !!(cond) :			\
 	({								\
 		int ______r;						\
 		static struct ftrace_branch_data			\

[PATCH 4.4 033/137] tracepoints: Do not trace when cpu is offline

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Red Hat) <rostedt@goodmis.org>

commit f37755490fe9bf76f6ba1d8c6591745d3574a6a6 upstream.

The tracepoint infrastructure uses RCU sched protection to enable and
disable tracepoints safely. There are some instances where tracepoints are
used in infrastructure code (like kfree()) that get called after a CPU is
going offline, and perhaps when it is coming back online but hasn't been
registered yet.

This can probuce the following warning:

 [ INFO: suspicious RCU usage. ]
 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S
 -------------------------------
 include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!  rcu_scheduler_active = 1, debug_locks = 1
 no locks held by swapper/8/0.

 stack backtrace:
  CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S              4.4.0-00006-g0fe53e8-dirty #34
  Call Trace:
  [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable)
  [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170
  [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440
  [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100
  [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150
  [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140
  [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310
  [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60
  [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40
  [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560
  [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360
  [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14

This warning is not a false positive either. RCU is not protecting code that
is being executed while the CPU is offline.

Instead of playing "whack-a-mole(TM)" and adding conditional statements to
the tracepoints we find that are used in this instance, simply add a
cpu_online() test to the tracepoint code where the tracepoint will be
ignored if the CPU is offline.

Use of raw_smp_processor_id() is fine, as there should never be a case where
the tracepoint code goes from running on a CPU that is online and suddenly
gets migrated to a CPU that is offline.

Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.org

Reported-by: Denis Kirjanov <kda@linux-powerpc.org>
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/tracepoint.h |    5 +++++
 1 file changed, 5 insertions(+)

--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -14,8 +14,10 @@
  * See the file COPYING for more details.
  */
 
+#include <linux/smp.h>
 #include <linux/errno.h>
 #include <linux/types.h>
+#include <linux/cpumask.h>
 #include <linux/rcupdate.h>
 #include <linux/static_key.h>
 
@@ -146,6 +148,9 @@ extern void syscall_unregfunc(void);
 		void *it_func;						\
 		void *__data;						\
 									\
+		if (!cpu_online(raw_smp_processor_id()))		\
+			return;						\
+									\
 		if (!(cond))						\
 			return;						\
 		prercu;							\

[PATCH 4.4 034/137] klist: fix starting point removed bug in klist iterators

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 00cd29b799e3449f0c68b1cc77cd4a5f95b42d17 upstream.

The starting node for a klist iteration is often passed in from
somewhere way above the klist infrastructure, meaning there's no
guarantee the node is still on the list.  We've seen this in SCSI where
we use bus_find_device() to iterate through a list of devices.  In the
face of heavy hotplug activity, the last device returned by
bus_find_device() can be removed before the next call.  This leads to

Dec  3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50()
Dec  3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core
Dec  3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2
Dec  3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
Dec  3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000
Dec  3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000
Dec  3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60
Dec  3 13:22:02 localhost kernel: Call Trace:
Dec  3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55
Dec  3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0
Dec  3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20
Dec  3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20
Dec  3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50
Dec  3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0
Dec  3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40
[...]

And an eventual crash. It can actually occur in any hotplug system
which has a device finder and a starting device.

We can fix this globally by making sure the starting node for
klist_iter_init_node() is actually a member of the list before using it
(and by starting from the beginning if it isn't).

Reported-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/klist.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/lib/klist.c
+++ b/lib/klist.c
@@ -282,9 +282,9 @@ void klist_iter_init_node(struct klist *
 			  struct klist_node *n)
 {
 	i->i_klist = k;
-	i->i_cur = n;
-	if (n)
-		kref_get(&n->n_ref);
+	i->i_cur = NULL;
+	if (n && kref_get_unless_zero(&n->n_ref))
+		i->i_cur = n;
 }
 EXPORT_SYMBOL_GPL(klist_iter_init_node);
 

[PATCH 4.4 035/137] scsi: add Synology to 1024 sector blacklist

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Christie <mchristi@redhat.com>

commit 9055082fb100cc66e20c048251d05159f5f2cfba upstream.

Another iscsi target that cannot handle large IOs, but does not tell us
a limit.

The Synology iSCSI targets report:

Block limits VPD page (SBC):
  Write same no zero (WSNZ): 0
  Maximum compare and write length: 0 blocks
  Optimal transfer length granularity: 0 blocks
  Maximum transfer length: 0 blocks
  Optimal transfer length: 0 blocks
  Maximum prefetch length: 0 blocks
  Maximum unmap LBA count: 0
  Maximum unmap block descriptor count: 0
  Optimal unmap granularity: 0
  Unmap granularity alignment valid: 0
  Unmap granularity alignment: 0
  Maximum write same length: 0x0 blocks

and the size of the command it can handle seems to depend on how much
memory it can allocate at the time. This results in IO errors when
handling large IOs. This patch just has us use the old 1024 default
sectors for this target by adding it to the scsi blacklist. We do not
have good contacs with this vendors, so I have not been able to try and
fix on their side.

I have posted this a long while back, but it was not merged. This
version just fixes it up for merge/patch failures in the original
version.

Reported-by: Ancoron Luciferis <ancoron.luciferis@googlemail.com>
Reported-by: Michael Meyers <steltek@tcnnet.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_devinfo.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -227,6 +227,7 @@ static struct {
 	{"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC},
 	{"Promise", "", NULL, BLIST_SPARSELUN},
 	{"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024},
+	{"SYNOLOGY", "iSCSI Storage", NULL, BLIST_MAX_1024},
 	{"QUANTUM", "XP34301", "1071", BLIST_NOTQ},
 	{"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN},
 	{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},

[PATCH 4.4 036/137] iscsi-target: Fix potential dead-lock during node acl delete

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 26a99c19f810b2593410899a5b304b21b47428a6 upstream.

This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.

It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.

Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.

Reported-by:: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_configfs.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1593,7 +1593,8 @@ static int lio_tpg_check_prot_fabric_onl
 }
 
 /*
- * Called with spin_lock_bh(struct se_portal_group->session_lock) held..
+ * Called with spin_lock_irq(struct se_portal_group->session_lock) held
+ * or not held.
  *
  * Also, this function calls iscsit_inc_session_usage_count() on the
  * struct iscsi_session in question.
@@ -1601,19 +1602,32 @@ static int lio_tpg_check_prot_fabric_onl
 static int lio_tpg_shutdown_session(struct se_session *se_sess)
 {
 	struct iscsi_session *sess = se_sess->fabric_sess_ptr;
+	struct se_portal_group *se_tpg = se_sess->se_tpg;
+	bool local_lock = false;
+
+	if (!spin_is_locked(&se_tpg->session_lock)) {
+		spin_lock_irq(&se_tpg->session_lock);
+		local_lock = true;
+	}
 
 	spin_lock(&sess->conn_lock);
 	if (atomic_read(&sess->session_fall_back_to_erl0) ||
 	    atomic_read(&sess->session_logout) ||
 	    (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)) {
 		spin_unlock(&sess->conn_lock);
+		if (local_lock)
+			spin_unlock_irq(&sess->conn_lock);
 		return 0;
 	}
 	atomic_set(&sess->session_reinstatement, 1);
 	spin_unlock(&sess->conn_lock);
 
 	iscsit_stop_time2retain_timer(sess);
+	spin_unlock_irq(&se_tpg->session_lock);
+
 	iscsit_stop_session(sess, 1, 1);
+	if (!local_lock)
+		spin_lock_irq(&se_tpg->session_lock);
 
 	return 1;
 }

[PATCH 4.4 037/137] SCSI: fix crashes in sd and sr runtime PM

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 13b4389143413a1f18127c07f72c74cad5b563e8 upstream.

Runtime suspend during driver probe and removal can cause problems.
The driver's runtime_suspend or runtime_resume callbacks may invoked
before the driver has finished binding to the device or after the
driver has unbound from the device.

This problem shows up with the sd and sr drivers, and can cause disk
or CD/DVD drives to become unusable as a result.  The fix is simple.
The drivers store a pointer to the scsi_disk or scsi_cd structure as
their private device data when probing is finished, so we simply have
to be sure to clear the private data during removal and test it during
runtime suspend/resume.

This fixes <https://bugs.debian.org/801925>.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Paul Menzel <paul.menzel@giantmonkey.de>
Reported-by: Erich Schubert <erich@debian.org>
Reported-by: Alexandre Rossi <alexandre.rossi@gmail.com>
Tested-by: Paul Menzel <paul.menzel@giantmonkey.de>
Tested-by: Erich Schubert <erich@debian.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sd.c |    7 +++++--
 drivers/scsi/sr.c |    4 ++++
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3268,8 +3268,8 @@ static int sd_suspend_common(struct devi
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (!sdkp)
-		return 0;	/* this can happen */
+	if (!sdkp)	/* E.g.: runtime suspend following sd_remove() */
+		return 0;
 
 	if (sdkp->WCE && sdkp->media_present) {
 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
@@ -3308,6 +3308,9 @@ static int sd_resume(struct device *dev)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
+	if (!sdkp)	/* E.g.: runtime resume at the start of sd_probe() */
+		return 0;
+
 	if (!sdkp->device->manage_start_stop)
 		return 0;
 
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -144,6 +144,9 @@ static int sr_runtime_suspend(struct dev
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
+	if (!cd)	/* E.g.: runtime suspend following sr_remove() */
+		return 0;
+
 	if (cd->media_present)
 		return -EBUSY;
 	else
@@ -985,6 +988,7 @@ static int sr_remove(struct device *dev)
 	scsi_autopm_get_device(cd->device);
 
 	del_gendisk(cd->disk);
+	dev_set_drvdata(dev, NULL);
 
 	mutex_lock(&sr_ref_mutex);
 	kref_put(&cd->kref, sr_kref_release);

[PATCH 4.4 038/137] drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit 461c7fa126794157484dca48e88effa4963e3af3 upstream.

Reduced testcase:

    #include <fcntl.h>
    #include <unistd.h>
    #include <sys/mman.h>
    #include <numaif.h>

    #define SIZE 0x2000

    int main()
    {
        int fd;
        void *p;

        fd = open("/dev/sg0", O_RDWR);
        p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0);
        mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE);
        return 0;
    }

We shouldn't try to migrate pages in sg VMA as we don't have a way to
update Sg_scatter_hold::pages accordingly from mm core.

Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not
migratable.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1261,7 +1261,7 @@ sg_mmap(struct file *filp, struct vm_are
 	}
 
 	sfp->mmap_called = 1;
-	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+	vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
 	vma->vm_private_data = sfp;
 	vma->vm_ops = &sg_mmap_vm_ops;
 	return 0;

[PATCH 4.4 039/137] scsi_dh_rdac: always retry MODE SELECT on command lock violation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <hare@suse.de>

commit d2d06d4fe0f2cc2df9b17fefec96e6e1a1271d91 upstream.

If MODE SELECT returns with sense '05/91/36' (command lock violation)
it should always be retried without counting the number of retries.
During an HBA upgrade or similar circumstances one might see a flood
of MODE SELECT command from various HBAs, which will easily trigger
the sense code and exceed the retry count.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/device_handler/scsi_dh_rdac.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -562,7 +562,7 @@ static int mode_select_handle_sense(stru
 			/*
 			 * Command Lock contention
 			 */
-			err = SCSI_DH_RETRY;
+			err = SCSI_DH_IMM_RETRY;
 		break;
 	default:
 		break;
@@ -612,6 +612,8 @@ retry:
 		err = mode_select_handle_sense(sdev, h->sense);
 		if (err == SCSI_DH_RETRY && retry_cnt--)
 			goto retry;
+		if (err == SCSI_DH_IMM_RETRY)
+			goto retry;
 	}
 	if (err == SCSI_DH_OK) {
 		h->state = RDAC_STATE_ACTIVE;

[PATCH 4.4 040/137] SCSI: Add Marvell Console to VPD blacklist

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 82c43310508eb19eb41fe7862e89afeb74030b84 upstream.

I have a Marvell 88SE9230 SATA Controller that has some sort of
integrated console SCSI device attached to one of the ports.

  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
  ata14.00: configured for UDMA/66
  scsi 13:0:0:0: Processor         Marvell  Console 1.01 PQ: 0 ANSI: 5

Sending it VPD INQUIRY command seem to always fail with following error:

  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link

This has been minor annoyance (only error printed on dmesg) until commit
09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd()
in scsi_rescan_device(). The commit causes the system to splat out
following errors continuously without ever reaching the UI:

  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
  ata14: hard resetting link
  ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  ata14.00: configured for UDMA/66
  ata14: EH complete
  ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  ata14.00: irq_stat 0x40000001
  ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in
            Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)

Without in-depth understanding of SCSI layer and the Marvell controller,
I suspect this happens because when the link goes down (because of an
error) we schedule scsi_rescan_device() which again fails to read VPD
data... ad infinitum.

Since VPD data cannot be read from the device anyway we prevent the SCSI
layer from even trying by blacklisting the device. This gets away the
error and the system starts up normally.

[mkp: Widened the match to all revisions of this device]

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_devinfo.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -205,6 +205,7 @@ static struct {
 	{"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC},
 	{"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
 	{"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN},
+	{"Marvell", "Console", NULL, BLIST_SKIP_VPD_PAGES},
 	{"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"MATSHITA", "DMC-LC5", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
 	{"MATSHITA", "DMC-LC40", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},

[PATCH 4.4 041/137] scsi: fix soft lockup in scsi_remove_target() on module removal

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 90a88d6ef88edcfc4f644dddc7eef4ea41bccf8b upstream.

This softlockup is currently happening:

[  444.088002] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:1:29]
[  444.088002] Modules linked in: lpfc(-) qla2x00tgt(O) qla2xxx_scst(O) scst_vdisk(O) scsi_transport_fc libcrc32c scst(O) dlm configfs nfsd lockd grace nfs_acl auth_rpcgss sunrpc ed
d snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device dm_mod iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic gpio_ich iTCO_vendor_support ppdev snd_hda_intel snd_hda_codec snd_hda
_core snd_hwdep tg3 snd_pcm snd_timer libphy lpc_ich parport_pc ptp acpi_cpufreq snd pps_core fjes parport i2c_i801 ehci_pci tpm_tis tpm sr_mod cdrom soundcore floppy hwmon sg 8250_
fintek pcspkr i915 drm_kms_helper uhci_hcd ehci_hcd drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit usbcore button video usb_common fan ata_generic ata_piix libata th
ermal
[  444.088002] CPU: 1 PID: 29 Comm: kworker/1:1 Tainted: G           O    4.4.0-rc5-2.g1e923a3-default #1
[  444.088002] Hardware name: FUJITSU SIEMENS ESPRIMO E           /D2164-A1, BIOS 5.00 R1.10.2164.A1               05/08/2006
[  444.088002] Workqueue: fc_wq_4 fc_rport_final_delete [scsi_transport_fc]
[  444.088002] task: f6266ec0 ti: f6268000 task.ti: f6268000
[  444.088002] EIP: 0060:[<c07e7044>] EFLAGS: 00000286 CPU: 1
[  444.088002] EIP is at _raw_spin_unlock_irqrestore+0x14/0x20
[  444.088002] EAX: 00000286 EBX: f20d3800 ECX: 00000002 EDX: 00000286
[  444.088002] ESI: f50ba800 EDI: f2146848 EBP: f6269ec8 ESP: f6269ec8
[  444.088002]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  444.088002] CR0: 8005003b CR2: 08f96600 CR3: 363ae000 CR4: 000006d0
[  444.088002] Stack:
[  444.088002]  f6269eec c066b0f7 00000286 f2146848 f50ba808 f50ba800 f50ba800 f2146a90
[  444.088002]  f2146848 f6269f08 f8f0a4ed f3141000 f2146800 f2146a90 f619fa00 00000040
[  444.088002]  f6269f40 c026cb25 00000001 166c6392 00000061 f6757140 f6136340 00000004
[  444.088002] Call Trace:
[  444.088002]  [<c066b0f7>] scsi_remove_target+0x167/0x1c0
[  444.088002]  [<f8f0a4ed>] fc_rport_final_delete+0x9d/0x1e0 [scsi_transport_fc]
[  444.088002]  [<c026cb25>] process_one_work+0x155/0x3e0
[  444.088002]  [<c026cde7>] worker_thread+0x37/0x490
[  444.088002]  [<c027214b>] kthread+0x9b/0xb0
[  444.088002]  [<c07e72c1>] ret_from_kernel_thread+0x21/0x40

What appears to be happening is that something has pinned the target
so it can't go into STARGET_DEL via final release and the loop in
scsi_remove_target spins endlessly until that happens.

The fix for this soft lockup is to not keep looping over a device that
we've called remove on but which hasn't gone into DEL state.  This
patch will retain a simplistic memory of the last target and not keep
looping over it.

Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_sysfs.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1192,16 +1192,18 @@ static void __scsi_remove_target(struct
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget;
+	struct scsi_target *starget, *last_target = NULL;
 	unsigned long flags;
 
 restart:
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
-		if (starget->state == STARGET_DEL)
+		if (starget->state == STARGET_DEL ||
+		    starget == last_target)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
 			kref_get(&starget->reap_ref);
+			last_target = starget;
 			spin_unlock_irqrestore(shost->host_lock, flags);
 			__scsi_remove_target(starget);
 			scsi_target_reap(starget);

[PATCH 4.4 042/137] iio: adis_buffer: Fix out-of-bounds memory access

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit d590faf9e8f8509a0a0aa79c38e87fcc6b913248 upstream.

The SPI tx and rx buffers are both supposed to be scan_bytes amount of
bytes large and a common allocation is used to allocate both buffers. This
puts the beginning of the tx buffer scan_bytes bytes after the rx buffer.
The initialization of the tx buffer pointer is done adding scan_bytes to
the beginning of the rx buffer, but since the rx buffer is of type __be16
this will actually add two times as much and the tx buffer ends up pointing
after the allocated buffer.

Fix this by using scan_count, which is scan_bytes / 2, instead of
scan_bytes when initializing the tx buffer pointer.

Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis_buffer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -43,7 +43,7 @@ int adis_update_scan_mode(struct iio_dev
 		return -ENOMEM;
 
 	rx = adis->buffer;
-	tx = rx + indio_dev->scan_bytes;
+	tx = rx + scan_count;
 
 	spi_message_init(&adis->msg);
 

[PATCH 4.4 043/137] iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Cameron <jic23@kernel.org>

commit 9d0be85d4e2cfa2519ae16efe7ff4a7150c43c0b upstream.

Whilst this part has a hardware buffer, the identifcation that IIO cares
about is the userspace facing end.  It this case we push individual elements
from the hardware fifo into the software interface (specifically a kfifo)
rather than providing direct reads through to a hardware buffer
(as we still do in the sca3000 for example).

Technically the original specification as a hardware buffer could be
considered wrong, but it didn't matter until the patch listed below.

Result is that any attempt to enable the buffer will return -EINVAL

Fixes: 225d59adf1c8 ("iio: Specify supported modes for buffers")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ti_am335x_adc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -289,7 +289,7 @@ static int tiadc_iio_buffered_hardware_s
 		goto error_kfifo_free;
 
 	indio_dev->setup_ops = setup_ops;
-	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+	indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
 
 	return 0;
 

[PATCH 4.4 044/137] iio-light: Use a signed return type for ltr501_match_samp_freq()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markus Elfring <elfring@users.sourceforge.net>

commit c08ae18560aaed50fed306a2e11f36ce70130f65 upstream.

The return type "unsigned int" was used by the ltr501_match_samp_freq()
function despite of the aspect that it will eventually return a negative
error code.
Improve this implementation detail by deletion of the type modifier then.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/ltr501.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -180,7 +180,7 @@ static const struct ltr501_samp_table lt
 			{500000, 2000000}
 };
 
-static unsigned int ltr501_match_samp_freq(const struct ltr501_samp_table *tab,
+static int ltr501_match_samp_freq(const struct ltr501_samp_table *tab,
 					   int len, int val, int val2)
 {
 	int i, freq;

[PATCH 4.4 045/137] iio: add HAS_IOMEM dependency to VF610_ADC

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vegard Nossum <vegard.nossum@oracle.com>

commit 005ce0713006a76d2b0c924ce0e2629e5d8510c3 upstream.

Ran into this on UML:

drivers/built-in.o: In function `vf610_adc_probe':
drivers/iio/adc/vf610_adc.c:744: undefined reference to `devm_ioremap_resource'

devm_ioremap_resource() is defined only when HAS_IOMEM is selected.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -372,6 +372,7 @@ config TWL6030_GPADC
 config VF610_ADC
 	tristate "Freescale vf610 ADC driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

[PATCH 4.4 047/137] iio: dac: mcp4725: set iio name property in sysfs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yong Li <sdliyong@gmail.com>

commit 97a249e98a72d6b79fb7350a8dd56b147e9d5bdb upstream.

Without this change, the name entity for mcp4725 is missing in
/sys/bus/iio/devices/iio\:device*/name

With this change, name is reported correctly

Signed-off-by: Yong Li <sdliyong@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/dac/mcp4725.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -300,6 +300,7 @@ static int mcp4725_probe(struct i2c_clie
 	data->client = client;
 
 	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = id->name;
 	indio_dev->info = &mcp4725_info;
 	indio_dev->channels = &mcp4725_channel;
 	indio_dev->num_channels = 1;

[PATCH 4.4 048/137] iio: light: acpi-als: Report data as processed

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabriele Mazzotta <gabriele.mzt@gmail.com>

commit fa34e6dd44d7c02c8a8468ce4a52a7506f907bef upstream.

As per the ACPI specification (Revision 5.0) [1], the data coming
from the sensor represent the ambient light illuminance reading
expressed in lux. So use IIO_CHAN_INFO_PROCESSED to signify that
the data are pre-processed.

However, to keep backward ABI compatibility, the IIO_CHAN_INFO_RAW
bit is not removed.

[1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf

This issue has also been responsible for at least one userspace bug
report hence marking what is a small semantic fix really for stable.
[2] https://github.com/hadess/iio-sensor-proxy/issues/46

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/acpi-als.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/iio/light/acpi-als.c
+++ b/drivers/iio/light/acpi-als.c
@@ -54,7 +54,9 @@ static const struct iio_chan_spec acpi_a
 			.realbits	= 32,
 			.storagebits	= 32,
 		},
-		.info_mask_separate	= BIT(IIO_CHAN_INFO_RAW),
+		/* _RAW is here for backward ABI compatibility */
+		.info_mask_separate	= BIT(IIO_CHAN_INFO_RAW) |
+					  BIT(IIO_CHAN_INFO_PROCESSED),
 	},
 };
 
@@ -152,7 +154,7 @@ static int acpi_als_read_raw(struct iio_
 	s32 temp_val;
 	int ret;
 
-	if (mask != IIO_CHAN_INFO_RAW)
+	if ((mask != IIO_CHAN_INFO_PROCESSED) && (mask != IIO_CHAN_INFO_RAW))
 		return -EINVAL;
 
 	/* we support only illumination (_ALI) so far. */

[PATCH 4.4 049/137] iio: pressure: mpl115: fix temperature offset sign

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Akinobu Mita <akinobu.mita@gmail.com>

commit 431386e783a3a6c8b7707bee32d18c353b8688b2 upstream.

According to the datasheet, the resolusion of temperature sensor is
-5.35 counts/C. Temperature ADC is 472 counts at 25C.
(https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf
NOTE: This is older revision, but this information is removed from the
latest datasheet from nxp somehow)

Temp [C] = (Tadc - 472) / -5.35 + 25
         = (Tadc - 605.750000) * -0.186915888

So the correct offset is -605.750000.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/pressure/mpl115.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/pressure/mpl115.c
+++ b/drivers/iio/pressure/mpl115.c
@@ -117,7 +117,7 @@ static int mpl115_read_raw(struct iio_de
 		*val = ret >> 6;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = 605;
+		*val = -605;
 		*val2 = 750000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SCALE:

[PATCH 4.4 050/137] iio: inkern: fix a NULL dereference on error

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit d81dac3c1c5295c61b15293074ac2bd3254e1875 upstream.

In twl4030_bci_probe() there are some failure paths where we call
iio_channel_release() with a NULL pointer.  (Apparently, that driver can
opperate without a valid channel pointer).  Let's fix it by adding a
NULL check in iio_channel_release().

Fixes: 2202e1fc5a29 ('drivers: power: twl4030_charger: fix link problems when building as module')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/inkern.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -351,6 +351,8 @@ EXPORT_SYMBOL_GPL(iio_channel_get);
 
 void iio_channel_release(struct iio_channel *channel)
 {
+	if (!channel)
+		return;
 	iio_device_put(channel->indio_dev);
 	kfree(channel);
 }

[PATCH 4.4 051/137] cifs: Ratelimit kernel log messages

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jamie Bainbridge <jamie.bainbridge@gmail.com>

commit ec7147a99e33a9e4abad6fc6e1b40d15df045d53 upstream.

Under some conditions, CIFS can repeatedly call the cifs_dbg() logging
wrapper. If done rapidly enough, the console framebuffer can softlockup
or "rcu_sched self-detected stall". Apply the built-in log ratelimiters
to prevent such hangs.

Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifs_debug.c |    2 +-
 fs/cifs/cifs_debug.h |    9 ++++-----
 2 files changed, 5 insertions(+), 6 deletions(-)

--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -50,7 +50,7 @@ void cifs_vfs_err(const char *fmt, ...)
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	pr_err("CIFS VFS: %pV", &vaf);
+	pr_err_ratelimited("CIFS VFS: %pV", &vaf);
 
 	va_end(args);
 }
--- a/fs/cifs/cifs_debug.h
+++ b/fs/cifs/cifs_debug.h
@@ -51,14 +51,13 @@ __printf(1, 2) void cifs_vfs_err(const c
 /* information message: e.g., configuration, major event */
 #define cifs_dbg(type, fmt, ...)					\
 do {									\
-	if (type == FYI) {						\
-		if (cifsFYI & CIFS_INFO) {				\
-			pr_debug("%s: " fmt, __FILE__, ##__VA_ARGS__);	\
-		}							\
+	if (type == FYI && cifsFYI & CIFS_INFO) {			\
+		pr_debug_ratelimited("%s: "				\
+			    fmt, __FILE__, ##__VA_ARGS__);		\
 	} else if (type == VFS) {					\
 		cifs_vfs_err(fmt, ##__VA_ARGS__);			\
 	} else if (type == NOISY && type != 0) {			\
-		pr_debug(fmt, ##__VA_ARGS__);				\
+		pr_debug_ratelimited(fmt, ##__VA_ARGS__);		\
 	}								\
 } while (0)
 

[PATCH 4.4 052/137] cifs: fix race between call_async() and reconnect()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rabin Vincent <rabin.vincent@axis.com>

commit 820962dc700598ffe8cd21b967e30e7520c34748 upstream.

cifs_call_async() queues the MID to the pending list and calls
smb_send_rqst().  If smb_send_rqst() performs a partial send, it sets
the tcpStatus to CifsNeedReconnect and returns an error code to
cifs_call_async().  In this case, cifs_call_async() removes the MID
from the list and returns to the caller.

However, cifs_call_async() releases the server mutex _before_ removing
the MID.  This means that a cifs_reconnect() can race with this function
and manage to remove the MID from the list and delete the entry before
cifs_call_async() calls cifs_delete_mid().  This leads to various
crashes due to the use after free in cifs_delete_mid().

Task1				Task2

cifs_call_async():
 - rc = -EAGAIN
 - mutex_unlock(srv_mutex)

				cifs_reconnect():
				 - mutex_lock(srv_mutex)
				 - mutex_unlock(srv_mutex)
				 - list_delete(mid)
				 - mid->callback()
				 	cifs_writev_callback():
				 		- mutex_lock(srv_mutex)
						- delete(mid)
				 		- mutex_unlock(srv_mutex)

 - cifs_delete_mid(mid) <---- use after free

Fix this by removing the MID in cifs_call_async() before releasing the
srv_mutex.  Also hold the srv_mutex in cifs_reconnect() until the MIDs
are moved out of the pending list.

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@localhost.localdomain>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c   |    2 +-
 fs/cifs/transport.c |    6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -368,7 +368,6 @@ cifs_reconnect(struct TCP_Server_Info *s
 	server->session_key.response = NULL;
 	server->session_key.len = 0;
 	server->lstrp = jiffies;
-	mutex_unlock(&server->srv_mutex);
 
 	/* mark submitted MIDs for retry and issue callback */
 	INIT_LIST_HEAD(&retry_list);
@@ -381,6 +380,7 @@ cifs_reconnect(struct TCP_Server_Info *s
 		list_move(&mid_entry->qhead, &retry_list);
 	}
 	spin_unlock(&GlobalMid_Lock);
+	mutex_unlock(&server->srv_mutex);
 
 	cifs_dbg(FYI, "%s: issuing mid callbacks\n", __func__);
 	list_for_each_safe(tmp, tmp2, &retry_list) {
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -576,14 +576,16 @@ cifs_call_async(struct TCP_Server_Info *
 	cifs_in_send_dec(server);
 	cifs_save_when_sent(mid);
 
-	if (rc < 0)
+	if (rc < 0) {
 		server->sequence_number -= 2;
+		cifs_delete_mid(mid);
+	}
+
 	mutex_unlock(&server->srv_mutex);
 
 	if (rc == 0)
 		return 0;
 
-	cifs_delete_mid(mid);
 	add_credits_and_wake_if(server, credits, optype);
 	return rc;
 }

[PATCH 4.4 053/137] cifs_dbg() outputs an uninitialized buffer in cifs_readdir()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasily Averin <vvs@virtuozzo.com>

commit 01b9b0b28626db4a47d7f48744d70abca9914ef1 upstream.

In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized,
therefore its printk with "%s" modifier can leak content of kernelspace memory.
If old content of this buffer does not contain '\0' access bejond end of
allocated object can crash the host.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steve French <sfrench@localhost.localdomain>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/readdir.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -847,6 +847,7 @@ int cifs_readdir(struct file *file, stru
 		 * if buggy server returns . and .. late do we want to
 		 * check for that here?
 		 */
+		*tmp_buf = 0;
 		rc = cifs_filldir(current_entry, file, ctx,
 				  tmp_buf, max_len);
 		if (rc) {

[PATCH 4.4 054/137] cifs: fix erroneous return value

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Protopopov <a.s.protopopov@gmail.com>

commit 4b550af519854421dfec9f7732cdddeb057134b2 upstream.

The setup_ntlmv2_rsp() function may return positive value ENOMEM instead
of -ENOMEM in case of kmalloc failure.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifsencrypt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -714,7 +714,7 @@ setup_ntlmv2_rsp(struct cifs_ses *ses, c
 
 	ses->auth_key.response = kmalloc(baselen + tilen, GFP_KERNEL);
 	if (!ses->auth_key.response) {
-		rc = ENOMEM;
+		rc = -ENOMEM;
 		ses->auth_key.len = 0;
 		goto setup_ntlmv2_rsp_ret;
 	}

[PATCH 4.4 055/137] NFS: Fix attribute cache revalidation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit ade14a7df796d4e86bd9d181193c883a57b13db0 upstream.

If a NFSv4 client uses the cache_consistency_bitmask in order to
request only information about the change attribute, timestamps and
size, then it has not revalidated all attributes, and hence the
attribute timeout timestamp should not be updated.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/inode.c |   54 +++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 15 deletions(-)

--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1641,6 +1641,7 @@ static int nfs_update_inode(struct inode
 	unsigned long invalid = 0;
 	unsigned long now = jiffies;
 	unsigned long save_cache_validity;
+	bool cache_revalidated = true;
 
 	dfprintk(VFS, "NFS: %s(%s/%lu fh_crc=0x%08x ct=%d info=0x%x)\n",
 			__func__, inode->i_sb->s_id, inode->i_ino,
@@ -1702,22 +1703,28 @@ static int nfs_update_inode(struct inode
 				nfs_force_lookup_revalidate(inode);
 			inode->i_version = fattr->change_attr;
 		}
-	} else
+	} else {
 		nfsi->cache_validity |= save_cache_validity;
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_MTIME) {
 		memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime));
-	} else if (server->caps & NFS_CAP_MTIME)
+	} else if (server->caps & NFS_CAP_MTIME) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_CTIME) {
 		memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime));
-	} else if (server->caps & NFS_CAP_CTIME)
+	} else if (server->caps & NFS_CAP_CTIME) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	/* Check if our cached file size is stale */
 	if (fattr->valid & NFS_ATTR_FATTR_SIZE) {
@@ -1737,19 +1744,23 @@ static int nfs_update_inode(struct inode
 					(long long)cur_isize,
 					(long long)new_isize);
 		}
-	} else
+	} else {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_REVAL_PAGECACHE
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 
 	if (fattr->valid & NFS_ATTR_FATTR_ATIME)
 		memcpy(&inode->i_atime, &fattr->atime, sizeof(inode->i_atime));
-	else if (server->caps & NFS_CAP_ATIME)
+	else if (server->caps & NFS_CAP_ATIME) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATIME
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_MODE) {
 		if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) {
@@ -1758,36 +1769,42 @@ static int nfs_update_inode(struct inode
 			inode->i_mode = newmode;
 			invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
 		}
-	} else if (server->caps & NFS_CAP_MODE)
+	} else if (server->caps & NFS_CAP_MODE) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_INVALID_ACCESS
 				| NFS_INO_INVALID_ACL
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_OWNER) {
 		if (!uid_eq(inode->i_uid, fattr->uid)) {
 			invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
 			inode->i_uid = fattr->uid;
 		}
-	} else if (server->caps & NFS_CAP_OWNER)
+	} else if (server->caps & NFS_CAP_OWNER) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_INVALID_ACCESS
 				| NFS_INO_INVALID_ACL
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_GROUP) {
 		if (!gid_eq(inode->i_gid, fattr->gid)) {
 			invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
 			inode->i_gid = fattr->gid;
 		}
-	} else if (server->caps & NFS_CAP_OWNER_GROUP)
+	} else if (server->caps & NFS_CAP_OWNER_GROUP) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_INVALID_ACCESS
 				| NFS_INO_INVALID_ACL
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_NLINK) {
 		if (inode->i_nlink != fattr->nlink) {
@@ -1796,19 +1813,22 @@ static int nfs_update_inode(struct inode
 				invalid |= NFS_INO_INVALID_DATA;
 			set_nlink(inode, fattr->nlink);
 		}
-	} else if (server->caps & NFS_CAP_NLINK)
+	} else if (server->caps & NFS_CAP_NLINK) {
 		nfsi->cache_validity |= save_cache_validity &
 				(NFS_INO_INVALID_ATTR
 				| NFS_INO_REVAL_FORCED);
+		cache_revalidated = false;
+	}
 
 	if (fattr->valid & NFS_ATTR_FATTR_SPACE_USED) {
 		/*
 		 * report the blocks in 512byte units
 		 */
 		inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used);
- 	}
-	if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED)
+	} else if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED)
 		inode->i_blocks = fattr->du.nfs2.blocks;
+	else
+		cache_revalidated = false;
 
 	/* Update attrtimeo value if we're out of the unstable period */
 	if (invalid & NFS_INO_INVALID_ATTR) {
@@ -1818,9 +1838,13 @@ static int nfs_update_inode(struct inode
 		/* Set barrier to be more recent than all outstanding updates */
 		nfsi->attr_gencount = nfs_inc_attr_generation_counter();
 	} else {
-		if (!time_in_range_open(now, nfsi->attrtimeo_timestamp, nfsi->attrtimeo_timestamp + nfsi->attrtimeo)) {
-			if ((nfsi->attrtimeo <<= 1) > NFS_MAXATTRTIMEO(inode))
-				nfsi->attrtimeo = NFS_MAXATTRTIMEO(inode);
+		if (cache_revalidated) {
+			if (!time_in_range_open(now, nfsi->attrtimeo_timestamp,
+				nfsi->attrtimeo_timestamp + nfsi->attrtimeo)) {
+				nfsi->attrtimeo <<= 1;
+				if (nfsi->attrtimeo > NFS_MAXATTRTIMEO(inode))
+					nfsi->attrtimeo = NFS_MAXATTRTIMEO(inode);
+			}
 			nfsi->attrtimeo_timestamp = now;
 		}
 		/* Set the barrier to be more recent than this fattr */
@@ -1829,7 +1853,7 @@ static int nfs_update_inode(struct inode
 	}
 
 	/* Don't declare attrcache up to date if there were no attrs! */
-	if (fattr->valid != 0)
+	if (cache_revalidated)
 		invalid &= ~NFS_INO_INVALID_ATTR;
 
 	/* Don't invalidate the data if we were to blame */

[PATCH 4.4 056/137] pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 86fb449b07b8215443a30782dca5755d5b8b0577 upstream.

Jeff reports seeing an Oops in ff_layout_alloc_lseg. Turns out
copy+paste has played cruel tricks on a nested loop.

Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/flexfilelayout/flexfilelayout.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -145,7 +145,7 @@ static bool ff_mirror_match_fh(const str
 		return false;
 	for (i = 0; i < m1->fh_versions_cnt; i++) {
 		bool found_fh = false;
-		for (j = 0; j < m2->fh_versions_cnt; i++) {
+		for (j = 0; j < m2->fh_versions_cnt; j++) {
 			if (nfs_compare_fh(&m1->fh_versions[i],
 					&m2->fh_versions[j]) == 0) {
 				found_fh = true;

[PATCH 4.4 057/137] nfs: Fix race in __update_open_stateid()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Elble <aweits@rit.edu>

commit 361cad3c89070aeb37560860ea8bfc092d545adc upstream.

We've seen this in a packet capture - I've intermixed what I
think was going on. The fix here is to grab the so_lock sooner.

1964379 -> #1 open (for write) reply seqid=1
1964393 -> #2 open (for read) reply seqid=2

  __nfs4_close(), state->n_wronly--
  nfs4_state_set_mode_locked(), changes state->state = [R]
  state->flags is [RW]
  state->state is [R], state->n_wronly == 0, state->n_rdonly == 1

1964398 -> #3 open (for write) call -> because close is already running
1964399 -> downgrade (to read) call seqid=2 (close of #1)
1964402 -> #3 open (for write) reply seqid=3

 __update_open_stateid()
   nfs_set_open_stateid_locked(), changes state->flags
   state->flags is [RW]
   state->state is [R], state->n_wronly == 0, state->n_rdonly == 1
   new sequence number is exposed now via nfs4_stateid_copy()

   next step would be update_open_stateflags(), pending so_lock

1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1)

   nfs4_close_prepare() gets so_lock and recalcs flags -> send close

1964405 -> downgrade (to read) call seqid=3 (close of #1 retry)

   __update_open_stateid() gets so_lock
 * update_open_stateflags() updates state->n_wronly.
   nfs4_state_set_mode_locked() updates state->state

   state->flags is [RW]
   state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1

 * should have suppressed the preceding nfs4_close_prepare() from
   sending open_downgrade

1964406 -> write call
1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry)

   nfs_clear_open_stateid_locked()
   state->flags is [R]
   state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1

1964409 -> write reply (fails, openmode)

Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1385,6 +1385,7 @@ static void __update_open_stateid(struct
 	 * Protect the call to nfs4_state_set_mode_locked and
 	 * serialise the stateid update
 	 */
+	spin_lock(&state->owner->so_lock);
 	write_seqlock(&state->seqlock);
 	if (deleg_stateid != NULL) {
 		nfs4_stateid_copy(&state->stateid, deleg_stateid);
@@ -1393,7 +1394,6 @@ static void __update_open_stateid(struct
 	if (open_stateid != NULL)
 		nfs_set_open_stateid_locked(state, open_stateid, fmode);
 	write_sequnlock(&state->seqlock);
-	spin_lock(&state->owner->so_lock);
 	update_open_stateflags(state, fmode);
 	spin_unlock(&state->owner->so_lock);
 }

[PATCH 4.4 058/137] pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 082fa37d1351a41afc491d44a1d095cb8d919aa2 upstream.

We must not skip encoding the statistics, or the server will see an
XDR encoding error.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/flexfilelayout/flexfilelayout.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -1859,11 +1859,9 @@ ff_layout_encode_layoutreturn(struct pnf
 	start = xdr_reserve_space(xdr, 4);
 	BUG_ON(!start);
 
-	if (ff_layout_encode_ioerr(flo, xdr, args))
-		goto out;
-
+	ff_layout_encode_ioerr(flo, xdr, args);
 	ff_layout_encode_iostats(flo, xdr, args);
-out:
+
 	*start = cpu_to_be32((xdr->p - start - 1) * 4);
 	dprintk("%s: Return\n", __func__);
 }

[PATCH 4.4 059/137] udf: limit the maximum number of indirect extents in a row

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vegard Nossum <vegard.nossum@oracle.com>

commit b0918d9f476a8434b055e362b83fa4fd1d462c3f upstream.

udf_next_aext() just follows extent pointers while extents are marked as
indirect. This can loop forever for corrupted filesystem. Limit number
the of indirect extents we are willing to follow in a row.

[JK: Updated changelog, limit, style]

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/inode.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -2047,14 +2047,29 @@ void udf_write_aext(struct inode *inode,
 		epos->offset += adsize;
 }
 
+/*
+ * Only 1 indirect extent in a row really makes sense but allow upto 16 in case
+ * someone does some weird stuff.
+ */
+#define UDF_MAX_INDIR_EXTS 16
+
 int8_t udf_next_aext(struct inode *inode, struct extent_position *epos,
 		     struct kernel_lb_addr *eloc, uint32_t *elen, int inc)
 {
 	int8_t etype;
+	unsigned int indirections = 0;
 
 	while ((etype = udf_current_aext(inode, epos, eloc, elen, inc)) ==
 	       (EXT_NEXT_EXTENT_ALLOCDECS >> 30)) {
 		int block;
+
+		if (++indirections > UDF_MAX_INDIR_EXTS) {
+			udf_err(inode->i_sb,
+				"too many indirect extents in inode %lu\n",
+				inode->i_ino);
+			return -1;
+		}
+
 		epos->block = *eloc;
 		epos->offset = sizeof(struct allocExtDesc);
 		brelse(epos->bh);

[PATCH 4.4 060/137] udf: Prevent buffer overrun with multi-byte characters

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Gabbasov <andrew_gabbasov@mentor.com>

commit ad402b265ecf6fa22d04043b41444cdfcdf4f52d upstream.

udf_CS0toUTF8 function stops the conversion when the output buffer
length reaches UDF_NAME_LEN-2, which is correct maximum name length,
but, when checking, it leaves the space for a single byte only,
while multi-bytes output characters can take more space, causing
buffer overflow.

Similar error exists in udf_CS0toNLS function, that restricts
the output length to UDF_NAME_LEN, while actual maximum allowed
length is UDF_NAME_LEN-2.

In these cases the output can override not only the current buffer
length field, causing corruption of the name buffer itself, but also
following allocation structures, causing kernel crash.

Adjust the output length checks in both functions to prevent buffer
overruns in case of multi-bytes UTF8 or NLS characters.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/unicode.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -128,11 +128,15 @@ int udf_CS0toUTF8(struct ustr *utf_o, co
 		if (c < 0x80U)
 			utf_o->u_name[utf_o->u_len++] = (uint8_t)c;
 		else if (c < 0x800U) {
+			if (utf_o->u_len > (UDF_NAME_LEN - 4))
+				break;
 			utf_o->u_name[utf_o->u_len++] =
 						(uint8_t)(0xc0 | (c >> 6));
 			utf_o->u_name[utf_o->u_len++] =
 						(uint8_t)(0x80 | (c & 0x3f));
 		} else {
+			if (utf_o->u_len > (UDF_NAME_LEN - 5))
+				break;
 			utf_o->u_name[utf_o->u_len++] =
 						(uint8_t)(0xe0 | (c >> 12));
 			utf_o->u_name[utf_o->u_len++] =
@@ -277,7 +281,7 @@ static int udf_CS0toNLS(struct nls_table
 			c = (c << 8) | ocu[i++];
 
 		len = nls->uni2char(c, &utf_o->u_name[utf_o->u_len],
-				    UDF_NAME_LEN - utf_o->u_len);
+				    UDF_NAME_LEN - 2 - utf_o->u_len);
 		/* Valid character? */
 		if (len >= 0)
 			utf_o->u_len += len;

[PATCH 4.4 061/137] udf: Check output buffer length when converting name to CS0

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Gabbasov <andrew_gabbasov@mentor.com>

commit bb00c898ad1ce40c4bb422a8207ae562e9aea7ae upstream.

If a name contains at least some characters with Unicode values
exceeding single byte, the CS0 output should have 2 bytes per character.
And if other input characters have single byte Unicode values, then
the single input byte is converted to 2 output bytes, and the length
of output becomes larger than the length of input. And if the input
name is long enough, the output length may exceed the allocated buffer
length.

All this means that conversion from UTF8 or NLS to CS0 requires
checking of output length in order to stop when it exceeds the given
output buffer size.

[JK: Make code return -ENAMETOOLONG instead of silently truncating the
name]

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/unicode.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -177,17 +177,22 @@ int udf_CS0toUTF8(struct ustr *utf_o, co
 static int udf_UTF8toCS0(dstring *ocu, struct ustr *utf, int length)
 {
 	unsigned c, i, max_val, utf_char;
-	int utf_cnt, u_len;
+	int utf_cnt, u_len, u_ch;
 
 	memset(ocu, 0, sizeof(dstring) * length);
 	ocu[0] = 8;
 	max_val = 0xffU;
+	u_ch = 1;
 
 try_again:
 	u_len = 0U;
 	utf_char = 0U;
 	utf_cnt = 0U;
 	for (i = 0U; i < utf->u_len; i++) {
+		/* Name didn't fit? */
+		if (u_len + 1 + u_ch >= length)
+			return 0;
+
 		c = (uint8_t)utf->u_name[i];
 
 		/* Complete a multi-byte UTF-8 character */
@@ -229,6 +234,7 @@ try_again:
 			if (max_val == 0xffU) {
 				max_val = 0xffffU;
 				ocu[0] = (uint8_t)0x10U;
+				u_ch = 2;
 				goto try_again;
 			}
 			goto error_out;
@@ -299,15 +305,19 @@ static int udf_NLStoCS0(struct nls_table
 	int len;
 	unsigned i, max_val;
 	uint16_t uni_char;
-	int u_len;
+	int u_len, u_ch;
 
 	memset(ocu, 0, sizeof(dstring) * length);
 	ocu[0] = 8;
 	max_val = 0xffU;
+	u_ch = 1;
 
 try_again:
 	u_len = 0U;
 	for (i = 0U; i < uni->u_len; i++) {
+		/* Name didn't fit? */
+		if (u_len + 1 + u_ch >= length)
+			return 0;
 		len = nls->char2uni(&uni->u_name[i], uni->u_len - i, &uni_char);
 		if (!len)
 			continue;
@@ -320,6 +330,7 @@ try_again:
 		if (uni_char > max_val) {
 			max_val = 0xffffU;
 			ocu[0] = (uint8_t)0x10U;
+			u_ch = 2;
 			goto try_again;
 		}
 

[PATCH 4.4 062/137] SUNRPC: Fixup socket wait for memory

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 13331a551ab4df87f7a027d2cab392da96aba1de upstream.

We're seeing hangs in the NFS client code, with loops of the form:

 RPC: 30317 xmit incomplete (267368 left of 524448)
 RPC: 30317 call_status (status -11)
 RPC: 30317 call_transmit (status 0)
 RPC: 30317 xprt_prepare_transmit
 RPC: 30317 xprt_transmit(524448)
 RPC:       xs_tcp_send_request(267368) = -11
 RPC: 30317 xmit incomplete (267368 left of 524448)
 RPC: 30317 call_status (status -11)
 RPC: 30317 call_transmit (status 0)
 RPC: 30317 xprt_prepare_transmit
 RPC: 30317 xprt_transmit(524448)

Turns out commit ceb5d58b2170 ("net: fix sock_wake_async() rcu protection")
moved SOCKWQ_ASYNC_NOSPACE out of sock->flags and into sk->sk_wq->flags,
however it never tried to fix up the code in net/sunrpc.

The new idiom is to use the flags in the RCU protected struct socket_wq.
While we're at it, clear out the now redundant places where we set/clear
SOCKWQ_ASYNC_NOSPACE and SOCK_NOSPACE. In principle, sk_stream_wait_memory()
is supposed to set these for us, so we only need to clear them in the
particular case of our ->write_space() callback.

Fixes: ceb5d58b2170 ("net: fix sock_wake_async() rcu protection")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtsock.c |   49 +++++++++++++++++++++----------------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -398,7 +398,6 @@ static int xs_sendpages(struct socket *s
 	if (unlikely(!sock))
 		return -ENOTSOCK;
 
-	clear_bit(SOCKWQ_ASYNC_NOSPACE, &sock->flags);
 	if (base != 0) {
 		addr = NULL;
 		addrlen = 0;
@@ -442,7 +441,6 @@ static void xs_nospace_callback(struct r
 	struct sock_xprt *transport = container_of(task->tk_rqstp->rq_xprt, struct sock_xprt, xprt);
 
 	transport->inet->sk_write_pending--;
-	clear_bit(SOCKWQ_ASYNC_NOSPACE, &transport->sock->flags);
 }
 
 /**
@@ -467,20 +465,11 @@ static int xs_nospace(struct rpc_task *t
 
 	/* Don't race with disconnect */
 	if (xprt_connected(xprt)) {
-		if (test_bit(SOCKWQ_ASYNC_NOSPACE, &transport->sock->flags)) {
-			/*
-			 * Notify TCP that we're limited by the application
-			 * window size
-			 */
-			set_bit(SOCK_NOSPACE, &transport->sock->flags);
-			sk->sk_write_pending++;
-			/* ...and wait for more buffer space */
-			xprt_wait_for_buffer_space(task, xs_nospace_callback);
-		}
-	} else {
-		clear_bit(SOCKWQ_ASYNC_NOSPACE, &transport->sock->flags);
+		/* wait for more buffer space */
+		sk->sk_write_pending++;
+		xprt_wait_for_buffer_space(task, xs_nospace_callback);
+	} else
 		ret = -ENOTCONN;
-	}
 
 	spin_unlock_bh(&xprt->transport_lock);
 
@@ -616,9 +605,6 @@ process_status:
 	case -EAGAIN:
 		status = xs_nospace(task);
 		break;
-	default:
-		dprintk("RPC:       sendmsg returned unrecognized error %d\n",
-			-status);
 	case -ENETUNREACH:
 	case -ENOBUFS:
 	case -EPIPE:
@@ -626,7 +612,10 @@ process_status:
 	case -EPERM:
 		/* When the server has died, an ICMP port unreachable message
 		 * prompts ECONNREFUSED. */
-		clear_bit(SOCKWQ_ASYNC_NOSPACE, &transport->sock->flags);
+		break;
+	default:
+		dprintk("RPC:       sendmsg returned unrecognized error %d\n",
+			-status);
 	}
 
 	return status;
@@ -706,16 +695,16 @@ static int xs_tcp_send_request(struct rp
 	case -EAGAIN:
 		status = xs_nospace(task);
 		break;
-	default:
-		dprintk("RPC:       sendmsg returned unrecognized error %d\n",
-			-status);
 	case -ECONNRESET:
 	case -ECONNREFUSED:
 	case -ENOTCONN:
 	case -EADDRINUSE:
 	case -ENOBUFS:
 	case -EPIPE:
-		clear_bit(SOCKWQ_ASYNC_NOSPACE, &transport->sock->flags);
+		break;
+	default:
+		dprintk("RPC:       sendmsg returned unrecognized error %d\n",
+			-status);
 	}
 
 	return status;
@@ -1609,19 +1598,23 @@ static void xs_tcp_state_change(struct s
 
 static void xs_write_space(struct sock *sk)
 {
-	struct socket *sock;
+	struct socket_wq *wq;
 	struct rpc_xprt *xprt;
 
-	if (unlikely(!(sock = sk->sk_socket)))
+	if (!sk->sk_socket)
 		return;
-	clear_bit(SOCK_NOSPACE, &sock->flags);
+	clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
 
 	if (unlikely(!(xprt = xprt_from_sock(sk))))
 		return;
-	if (test_and_clear_bit(SOCKWQ_ASYNC_NOSPACE, &sock->flags) == 0)
-		return;
+	rcu_read_lock();
+	wq = rcu_dereference(sk->sk_wq);
+	if (!wq || test_and_clear_bit(SOCKWQ_ASYNC_NOSPACE, &wq->flags) == 0)
+		goto out;
 
 	xprt_write_space(xprt);
+out:
+	rcu_read_unlock();
 }
 
 /**

[PATCH 4.4 063/137] powerpc/eeh: Fix PE location code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <gwshan@linux.vnet.ibm.com>

commit 7e56f627768da4e6480986b5145dc3422bc448a5 upstream.

In eeh_pe_loc_get(), the PE location code is retrieved from the
"ibm,loc-code" property of the device node for the bridge of the
PE's primary bus. It's not correct because the property indicates
the parent PE's location code.

This reads the correct PE location code from "ibm,io-base-loc-code"
or "ibm,slot-location-code" property of PE parent bus's device node.

Fixes: 357b2f3dd9b7 ("powerpc/eeh: Dump PE location code")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/eeh_pe.c |   33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -883,32 +883,29 @@ void eeh_pe_restore_bars(struct eeh_pe *
 const char *eeh_pe_loc_get(struct eeh_pe *pe)
 {
 	struct pci_bus *bus = eeh_pe_bus_get(pe);
-	struct device_node *dn = pci_bus_to_OF_node(bus);
+	struct device_node *dn;
 	const char *loc = NULL;
 
-	if (!dn)
-		goto out;
+	while (bus) {
+		dn = pci_bus_to_OF_node(bus);
+		if (!dn) {
+			bus = bus->parent;
+			continue;
+		}
 
-	/* PHB PE or root PE ? */
-	if (pci_is_root_bus(bus)) {
-		loc = of_get_property(dn, "ibm,loc-code", NULL);
-		if (!loc)
+		if (pci_is_root_bus(bus))
 			loc = of_get_property(dn, "ibm,io-base-loc-code", NULL);
+		else
+			loc = of_get_property(dn, "ibm,slot-location-code",
+					      NULL);
+
 		if (loc)
-			goto out;
+			return loc;
 
-		/* Check the root port */
-		dn = dn->child;
-		if (!dn)
-			goto out;
+		bus = bus->parent;
 	}
 
-	loc = of_get_property(dn, "ibm,loc-code", NULL);
-	if (!loc)
-		loc = of_get_property(dn, "ibm,slot-location-code", NULL);
-
-out:
-	return loc ? loc : "N/A";
+	return "N/A";
 }
 
 /**

[PATCH 4.4 064/137] powerpc: Simplify module TOC handling

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Modra <amodra@gmail.com>

commit c153693d7eb9eeb28478aa2deaaf0b4e7b5ff5e9 upstream.

PowerPC64 uses the symbol .TOC. much as other targets use
_GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in
powerpc parlance, the TOC pointer). Global offset tables are generally
local to an executable or shared library, or in the kernel, module. Thus
it does not make sense for a module to resolve a relocation against
.TOC. to the kernel's .TOC. value. A module has its own .TOC., and
indeed the powerpc64 module relocation processing ignores the kernel
value of .TOC. and instead calculates a module-local value.

This patch removes code involved in exporting the kernel .TOC., tweaks
modpost to ignore an undefined .TOC., and the module loader to twiddle
the section symbol so that .TOC. isn't seen as undefined.

Note that if the kernel was compiled with -msingle-pic-base then ELFv2
would not have function global entry code setting up r2. In that case
the module call stubs would need to be modified to set up r2 using the
kernel .TOC. value, requiring some of this code to be reinstated.

mpe: Furthermore a change in binutils master (not yet released) causes
the current way we handle the TOC to no longer work when building with
MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be
loaded due to there being no version found for TOC.

Signed-off-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/misc_64.S   |   28 ----------------------------
 arch/powerpc/kernel/module_64.c |   12 +++++++++---
 scripts/mod/modpost.c           |    3 ++-
 3 files changed, 11 insertions(+), 32 deletions(-)

--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -701,31 +701,3 @@ _GLOBAL(kexec_sequence)
 	li	r5,0
 	blr	/* image->start(physid, image->start, 0); */
 #endif /* CONFIG_KEXEC */
-
-#ifdef CONFIG_MODULES
-#if defined(_CALL_ELF) && _CALL_ELF == 2
-
-#ifdef CONFIG_MODVERSIONS
-.weak __crc_TOC.
-.section "___kcrctab+TOC.","a"
-.globl __kcrctab_TOC.
-__kcrctab_TOC.:
-	.llong	__crc_TOC.
-#endif
-
-/*
- * Export a fake .TOC. since both modpost and depmod will complain otherwise.
- * Both modpost and depmod strip the leading . so we do the same here.
- */
-.section "__ksymtab_strings","a"
-__kstrtab_TOC.:
-	.asciz "TOC."
-
-.section "___ksymtab+TOC.","a"
-/* This symbol name is important: it's used by modpost to find exported syms */
-.globl __ksymtab_TOC.
-__ksymtab_TOC.:
-	.llong 0 /* .value */
-	.llong __kstrtab_TOC.
-#endif /* ELFv2 */
-#endif /* MODULES */
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -326,7 +326,10 @@ static void dedotify_versions(struct mod
 		}
 }
 
-/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
+/*
+ * Undefined symbols which refer to .funcname, hack to funcname. Make .TOC.
+ * seem to be defined (value set later).
+ */
 static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 {
 	unsigned int i;
@@ -334,8 +337,11 @@ static void dedotify(Elf64_Sym *syms, un
 	for (i = 1; i < numsyms; i++) {
 		if (syms[i].st_shndx == SHN_UNDEF) {
 			char *name = strtab + syms[i].st_name;
-			if (name[0] == '.')
+			if (name[0] == '.') {
+				if (strcmp(name+1, "TOC.") == 0)
+					syms[i].st_shndx = SHN_ABS;
 				memmove(name, name+1, strlen(name));
+			}
 		}
 	}
 }
@@ -351,7 +357,7 @@ static Elf64_Sym *find_dot_toc(Elf64_Shd
 	numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
 
 	for (i = 1; i < numsyms; i++) {
-		if (syms[i].st_shndx == SHN_UNDEF
+		if (syms[i].st_shndx == SHN_ABS
 		    && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
 			return &syms[i];
 	}
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -594,7 +594,8 @@ static int ignore_undef_symbol(struct el
 		if (strncmp(symname, "_restgpr0_", sizeof("_restgpr0_") - 1) == 0 ||
 		    strncmp(symname, "_savegpr0_", sizeof("_savegpr0_") - 1) == 0 ||
 		    strncmp(symname, "_restvr_", sizeof("_restvr_") - 1) == 0 ||
-		    strncmp(symname, "_savevr_", sizeof("_savevr_") - 1) == 0)
+		    strncmp(symname, "_savevr_", sizeof("_savevr_") - 1) == 0 ||
+		    strcmp(symname, ".TOC.") == 0)
 			return 1;
 	/* Do not ignore this symbol */
 	return 0;

[PATCH 4.4 065/137] powerpc: Fix dedotify for binutils >= 2.26

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Schwab <schwab@linux-m68k.org>

commit f15838e9cac8f78f0cc506529bb9d3b9fa589c1f upstream.

Since binutils 2.26 BFD is doing suffix merging on STRTAB sections.  But
dedotify modifies the symbol names in place, which can also modify
unrelated symbols with a name that matches a suffix of a dotted name.  To
remove the leading dot of a symbol name we can just increment the pointer
into the STRTAB section instead.

Backport to all stables to avoid breakage when people update their
binutils - mpe.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/module_64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -340,7 +340,7 @@ static void dedotify(Elf64_Sym *syms, un
 			if (name[0] == '.') {
 				if (strcmp(name+1, "TOC.") == 0)
 					syms[i].st_shndx = SHN_ABS;
-				memmove(name, name+1, strlen(name));
+				syms[i].st_name++;
 			}
 		}
 	}

[PATCH 4.4 066/137] powerpc/eeh: Fix stale cached primary bus

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <gwshan@linux.vnet.ibm.com>

commit 05ba75f848647135f063199dc0e9f40fee769724 upstream.

When PE is created, its primary bus is cached to pe->bus. At later
point, the cached primary bus is returned from eeh_pe_bus_get().
However, we could get stale cached primary bus and run into kernel
crash in one case: full hotplug as part of fenced PHB error recovery
releases all PCI busses under the PHB at unplugging time and recreate
them at plugging time. pe->bus is still dereferencing the PCI bus
that was released.

This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity
of pe->bus. pe->bus is updated when its first child EEH device is
online and the flag is set. Before unplugging in full hotplug for
error recovery, the flag is cleared.

Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE")
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/eeh.h               |    1 +
 arch/powerpc/kernel/eeh_driver.c             |    3 +++
 arch/powerpc/kernel/eeh_pe.c                 |    2 +-
 arch/powerpc/platforms/powernv/eeh-powernv.c |    5 ++++-
 4 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -81,6 +81,7 @@ struct pci_dn;
 #define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
 #define EEH_PE_CFG_RESTRICTED	(1 << 9)	/* Block config on error */
 #define EEH_PE_REMOVED		(1 << 10)	/* Removed permanently	*/
+#define EEH_PE_PRI_BUS		(1 << 11)	/* Cached primary bus   */
 
 struct eeh_pe {
 	int type;			/* PE type: PHB/Bus/Device	*/
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -564,6 +564,7 @@ static int eeh_reset_device(struct eeh_p
 	 */
 	eeh_pe_state_mark(pe, EEH_PE_KEEP);
 	if (bus) {
+		eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 		pci_lock_rescan_remove();
 		pcibios_remove_pci_devices(bus);
 		pci_unlock_rescan_remove();
@@ -803,6 +804,7 @@ perm_error:
 	 * the their PCI config any more.
 	 */
 	if (frozen_bus) {
+		eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 		eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
 
 		pci_lock_rescan_remove();
@@ -886,6 +888,7 @@ static void eeh_handle_special_event(voi
 					continue;
 
 				/* Notify all devices to be down */
+				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 				bus = eeh_pe_bus_get(phb_pe);
 				eeh_pe_dev_traverse(pe,
 					eeh_report_failure, NULL);
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -928,7 +928,7 @@ struct pci_bus *eeh_pe_bus_get(struct ee
 		bus = pe->phb->bus;
 	} else if (pe->type & EEH_PE_BUS ||
 		   pe->type & EEH_PE_DEVICE) {
-		if (pe->bus) {
+		if (pe->state & EEH_PE_PRI_BUS) {
 			bus = pe->bus;
 			goto out;
 		}
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -444,9 +444,12 @@ static void *pnv_eeh_probe(struct pci_dn
 	 * PCI devices of the PE are expected to be removed prior
 	 * to PE reset.
 	 */
-	if (!edev->pe->bus)
+	if (!(edev->pe->state & EEH_PE_PRI_BUS)) {
 		edev->pe->bus = pci_find_bus(hose->global_number,
 					     pdn->busno);
+		if (edev->pe->bus)
+			edev->pe->state |= EEH_PE_PRI_BUS;
+	}
 
 	/*
 	 * Enable EEH explicitly so that we will do EEH check

[PATCH 4.4 067/137] powerpc/powernv: Fix stale PE primary bus

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <gwshan@linux.vnet.ibm.com>

commit 1bc74f1ccd457832dc515fc1febe6655985fdcd2 upstream.

When PCI bus is unplugged during full hotplug for EEH recovery,
the platform PE instance (struct pnv_ioda_pe) isn't released and
it dereferences the stale PCI bus that has been released. It leads
to kernel crash when referring to the stale PCI bus.

This fixes the issue by correcting the PE's primary bus when it's
oneline at plugging time, in pnv_pci_dma_bus_setup() which is to
be called by pcibios_fixup_bus().

Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/pci-ioda.c |    1 +
 arch/powerpc/platforms/powernv/pci.c      |   20 ++++++++++++++++++++
 arch/powerpc/platforms/powernv/pci.h      |    1 +
 3 files changed, 22 insertions(+)

--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3034,6 +3034,7 @@ static void pnv_pci_ioda_shutdown(struct
 
 static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
        .dma_dev_setup = pnv_pci_dma_dev_setup,
+       .dma_bus_setup = pnv_pci_dma_bus_setup,
 #ifdef CONFIG_PCI_MSI
        .setup_msi_irqs = pnv_setup_msi_irqs,
        .teardown_msi_irqs = pnv_teardown_msi_irqs,
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -762,6 +762,26 @@ void pnv_pci_dma_dev_setup(struct pci_de
 		phb->dma_dev_setup(phb, pdev);
 }
 
+void pnv_pci_dma_bus_setup(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+		if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
+			continue;
+
+		if (!pe->pbus)
+			continue;
+
+		if (bus->number == ((pe->rid >> 8) & 0xFF)) {
+			pe->pbus = bus;
+			break;
+		}
+	}
+}
+
 void pnv_pci_shutdown(void)
 {
 	struct pci_controller *hose;
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -235,6 +235,7 @@ extern void pnv_pci_reset_secondary_bus(
 extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
 extern void pnv_pci_dma_dev_setup(struct pci_dev *pdev);
+extern void pnv_pci_dma_bus_setup(struct pci_bus *bus);
 extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
 extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
 

[PATCH 4.4 068/137] powerpc/ioda: Set "read" permission when "write" is set

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kardashevskiy <aik@ozlabs.ru>

commit 6ecad912a0073c768db1491c27ca55ad2d0ee68f upstream.

Quite often drivers set only "write" permission assuming that this
includes "read" permission as well and this works on plenty of
platforms. However IODA2 is strict about this and produces an EEH when
"read" permission is not set and reading happens.

This adds a workaround in the IODA code to always add the "read" bit
when the "write" bit is set.

Fixes: 10b35b2b7485 ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE")
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/pci.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -601,6 +601,9 @@ int pnv_tce_build(struct iommu_table *tb
 	u64 rpn = __pa(uaddr) >> tbl->it_page_shift;
 	long i;
 
+	if (proto_tce & TCE_PCI_WRITE)
+		proto_tce |= TCE_PCI_READ;
+
 	for (i = 0; i < npages; i++) {
 		unsigned long newtce = proto_tce |
 			((rpn + i) << tbl->it_page_shift);
@@ -622,6 +625,9 @@ int pnv_tce_xchg(struct iommu_table *tbl
 
 	BUG_ON(*hpa & ~IOMMU_PAGE_MASK(tbl));
 
+	if (newtce & TCE_PCI_WRITE)
+		newtce |= TCE_PCI_READ;
+
 	oldtce = xchg(pnv_tce(tbl, idx), cpu_to_be64(newtce));
 	*hpa = be64_to_cpu(oldtce) & ~(TCE_PCI_READ | TCE_PCI_WRITE);
 	*direction = iommu_tce_direction(oldtce);

[PATCH 4.4 069/137] ARM: mvebu: remove duplicated regulator definition in Armada 388 GP

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit 079ae0c121fd23287f4ad2be9e9f8a13f63cae73 upstream.

The Armada 388 GP Device Tree file describes two times a regulator
named 'reg_usb2_1_vbus', with the exact same description. This has
been wrong since Armada 388 GP support was introduced.

Fixes: 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/armada-388-gp.dts |   10 ----------
 1 file changed, 10 deletions(-)

--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -303,16 +303,6 @@
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
 	reg_sata0: pwr-sata0 {
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata0";

[PATCH 4.4 071/137] ARM: 8519/1: ICST: try other dividends than 1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit e972c37459c813190461dabfeaac228e00aae259 upstream.

Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.

But for the code to make sense, let's insert the missing i++

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/common/icst.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -58,6 +58,7 @@ icst_hz_to_vco(const struct icst_params
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)

[PATCH 4.4 072/137] ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit 5070fb14a0154f075c8b418e5bc58a620ae85a45 upstream.

When trying to set the ICST 307 clock to 25174000 Hz I ran into
this arithmetic error: the icst_hz_to_vco() correctly figure out
DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of
25174000 Hz out of the VCO. (I replicated the icst_hz() function
in a spreadsheet to verify this.)

However, when I called icst_hz() on these VCO settings it would
instead return 4122709 Hz. This causes an error in the common
clock driver for ICST as the common clock framework will call
.round_rate() on the clock which will utilize icst_hz_to_vco()
followed by icst_hz() suggesting the erroneous frequency, and
then the clock gets set to this.

The error did not manifest in the old clock framework since
this high frequency was only used by the CLCD, which calls
clk_set_rate() without first calling clk_round_rate() and since
the old clock framework would not call clk_round_rate() before
setting the frequency, the correct values propagated into
the VCO.

After some experimenting I figured out that it was due to a simple
arithmetic overflow: the divisor for 24Mhz reference frequency
as reference becomes 24000000*2*(99+8)=0x132212400 and the "1"
in bit 32 overflows and is lost.

But introducing an explicit 64-by-32 bit do_div() and casting
the divisor into (u64) we get the right frequency back, and the
right frequency gets set.

Tested on the ARM Versatile.

Cc: linux-clk@vger.kernel.org
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/common/icst.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);

[PATCH 4.4 073/137] ARM: nomadik: fix up SD/MMC DT settings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit 418d5516568b3fdbc4e7b53677dd78aed8514565 upstream.

The DTSI file for the Nomadik does not properly specify how the
PL180 levelshifter is connected: the Nomadik actually needs all
the five st,sig-dir-* flags set to properly control all lines out.

Further this board supports full power cycling of the card, and
since this variant has no hardware clock gating, it needs a
ridiculously low frequency setting to keep up with the ever
overflowing FIFO.

The pin configuration set-up is a bit of a mystery, because of
course these pins are a mix of inputs and outputs. However the
reference implementation sets all pins to "output" with
unspecified initial value, so let's do that here as well.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/ste-nomadik-stn8815.dtsi |   37 +++++++++++++++--------------
 1 file changed, 20 insertions(+), 17 deletions(-)

--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;

[PATCH 4.4 074/137] ARM: dts: Fix wl12xx missing clocks that cause hangs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Ford <aford173@gmail.com>

commit 0ea24daae053a9ba65d2f3eb20523002c1a8af38 upstream.

The tcxo-clock-frequency binding is listed as optional,
but without it the wl12xx used on the torpedo + wireless
may hang.  Scanning also appears broken without this patch.

Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/logicpd-torpedo-som.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -122,6 +122,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 

[PATCH 4.4 075/137] ARM: dts: Fix omap5 PMIC control lines for RTC writes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit af756bbccff85504ce05c63a50f80b9d7823c500 upstream.

The palmas PMIC has two control lines that need to be muxed properly
for things to work. The sys_nirq pin is used for interrupts, and msecure
pin is used for enabling writes to some PMIC registers.

Without these pins configured properly things can fail in mysterious
ways. For example, we can't update the RTC registers on palmas PMIC
unless the msecure pin is configured. And this is probably the reason
why we had RTC missing from the omap5 dts file.

According to "OMAP5430 ES2.0 Data Manual [Public] VErsion A (Rev. F)"
swps052f.pdf, mux mode 1 is for sys_drm_msecure so in theory there's
should be no need to configure it as a GPIO pin.

However, it seems there are some reliability issues using the msecure
mux mode. And the TI trees configure the msecure pin as GPIO out high
instead.

As the PMIC only cares that the msecure line is high to allow access
to the RTC registers, let's use a GPIO hog as suggested by Nishanth
Menon <nm@ti.com>. Also the use of the internal pull was considered
but supposedly that may not be capable of keeping the line high in
a noisy environment.

If we ever see high security omap5 products in the mainline tree,
those need to skip the msecure pin muxing and ignore setting the GPIO
hog. Chances are the related pin mux registers are locked in that case
and the msecure pin is managed by whatever software may be running in
the ARM TrustZone.

Who knows what the original intention of the msecure pin was. Maybe
it was supposed to prevent the system time to be set back for some
game demo modes to time out? Anyways, it seems that later PMICs like
tps659037 have recycled this pin for "powerhold" and devices like
beagle-x15 do not need changes to the msecure pin configuration.

To avoid further confusion with TWL variant PMICs, beagle-x15 does
not have a back-up battery for RTC palmas. Instead the mcp79410 RTC
is used with rtc-ds1307 driver. There is a "powerhold" jumper j5
holes near the palmas PMIC, and shorting it seems to power up
beagle-x15 automatically. It is unknown if it also has other side
effects to the beagle-x15 power up sequence.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/omap5-board-common.dtsi |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -130,6 +130,16 @@
 	};
 };
 
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
 &omap5_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@@ -213,6 +223,13 @@
 		>;
 	};
 
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
 			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@@ -278,6 +295,12 @@
 			&usbhost_wkup_pins
 	>;
 
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
 			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@@ -345,6 +368,8 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";

[PATCH 4.4 076/137] ARM: dts: omap5-board-common: enable rtc and charging of backup battery

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H. Nikolaus Schaller <hns@goldelico.com>

commit c08659d431b40ad5beb97d7dde49ad9796cb812c upstream.

tested on OMP5432 EVM

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/omap5-board-common.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -383,6 +383,14 @@
 			#clock-cells = <0>;
 		};
 
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;

[PATCH 4.4 077/137] ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

commit f505dba762ae826bb68978a85ee5c8ced7dea8d7 upstream.

No interrupt were received from the phy because PIOE 1 may not be properly
muxed. It prevented proper link detection, especially since commit
321beec5047a ("net: phy: Use interrupts when available in NOLINK state")
disables polling.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d4_xplained.dts |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -86,6 +86,8 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
@@ -152,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};

[PATCH 4.4 078/137] ARM: dts: at91: sama5d4: fix instance id of DBGU

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>

commit 929e883f2bfdf68d4bd3aec43912e956417005c7 upstream.

Change instance id of DBGU to 45.

Signed-off-by: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>
Fixes: 7c661394c56c ("ARM: at91: dt: add device tree file for SAMA5D4 SoC")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/sama5d4.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1342,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;

[PATCH 4.4 079/137] ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <nicolas.ferre@atmel.com>

commit e873cc022ce5e2c04bbc53b5874494b657e29d3f upstream.

For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of
"edge falling".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d4_xplained.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -91,7 +91,7 @@
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};

[PATCH 4.4 080/137] ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wenyou Yang <wenyou.yang@atmel.com>

commit aae6b18f5c95b9dc78de66d1e27e8afeee2763b7 upstream.

On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend
state.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[nicolas.ferre@atmel.com: adapt to newer kernel]
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/at91-sama5d4ek.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

[PATCH 4.4 081/137] ARM: OMAP2+: Fix wait_dll_lock_timed for rodata

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit d9db59103305eb5ec2a86369f32063e9921b6ac5 upstream.

We don't want to be writing to .text so it can be set rodata.
Fix error "Unable to handle kernel paging request at virtual address
c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected.

As these counters are for debugging only and unused, we can just
remove them.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/sleep34xx.S |   22 ----------------------
 1 file changed, 22 deletions(-)

--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -289,12 +289,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -302,11 +296,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -330,9 +320,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
 exit_nonoff_modes:
@@ -360,15 +347,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 

[PATCH 4.4 082/137] ARM: OMAP2+: Fix l2_inv_api_params for rodata

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit 0a0b13275558c32bbf6241464a7244b1ffd5afb3 upstream.

We don't want to write to .text, so let's move l2_inv_api_params
to .data and access it via a pointer.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/sleep34xx.S |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -427,12 +427,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@@ -466,8 +468,8 @@ skipl2dis:
 	b	logic_l1_restore
 
 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@@ -516,6 +518,10 @@ control_mem_rta:
 l2dis_3630:
 	.word	0
 
+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
  * Internal functions
  */

[PATCH 4.4 083/137] ARM: OMAP2+: Fix l2dis_3630 for rodata

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit eeaf9646aca89d097861caa24d9818434e48810e upstream.

We don't want to write to .text section. Let's move l2dis_3630
to .data and access it via a pointer.

For calculating the offset, let's optimize out the add and do it
in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/sleep34xx.S |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -86,8 +86,9 @@ ENTRY(enable_omap3630_toggle_l2_on_resto
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
@@ -415,7 +416,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore
 
-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@@ -486,7 +489,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@@ -515,6 +520,10 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0
 

[PATCH 4.4 084/137] ARM: OMAP2+: Fix save_secure_ram_context for rodata

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit a5311d4d13df80bd71a9e47f9ecaf327f478fab1 upstream.

We don't want to write to .text and we can move save_secure_ram_context
into .data as it all gets copied into SRAM anyways.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/sleep34xx.S |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -92,8 +92,12 @@ ENTRY(enable_omap3630_toggle_l2_on_resto
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@@ -127,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+	.text
+
 /*
  * ======================
  * == Idle entry point ==

[PATCH 4.4 085/137] ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit 4da597d16602d14405b71a18d45e1c59f28f0fd2 upstream.

We don't want to write to .text so let's move ppa_zero_params and
ppa_por_params to .data and access them via pointers.

Note that I have not been able to test as we I don't have a HS
omap4 to test with. The code has been changed in similar way as
for omap3 though.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/sleep44xx.S |   25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -29,12 +29,6 @@
 	dsb
 .endm
 
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4
 
 /*
@@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@@ -328,6 +326,8 @@ skip_l2en:
 #endif
 
 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */
 
@@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop
 
 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0

[PATCH 4.4 086/137] arm64: dma-mapping: fix handling of devices registered before arch_initcall

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 722ec35f7faefcc34d12616eca7976a848870f9d upstream.

This patch ensures that devices, which got registered before arch_initcall
will be handled correctly by IOMMU-based DMA-mapping code.

Fixes: 13b8629f6511 ("arm64: Add IOMMU dma_ops")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/dma-mapping.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -933,6 +933,10 @@ static int __init __iommu_dma_init(void)
 		ret = register_iommu_dma_ops_notifier(&platform_bus_type);
 	if (!ret)
 		ret = register_iommu_dma_ops_notifier(&amba_bustype);
+
+	/* handle devices queued before this arch_initcall */
+	if (!ret)
+		__iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL);
 	return ret;
 }
 arch_initcall(__iommu_dma_init);

[PATCH 4.4 087/137] KVM: arm/arm64: Fix reference to uninitialised VGIC

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andre Przywara <andre.przywara@arm.com>

commit b3aff6ccbb1d25e506b60ccd9c559013903f3464 upstream.

Commit 4b4b4512da2a ("arm/arm64: KVM: Rework the arch timer to use
level-triggered semantics") brought the virtual architected timer
closer to the VGIC. There is one occasion were we don't properly
check for the VGIC actually having been initialized before, but
instead go on to check the active state of some IRQ number.
If userland hasn't instantiated a virtual GIC, we end up with a
kernel NULL pointer dereference:
=========
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ffffffc9745c5000
[00000000] *pgd=00000009f631e003, *pud=00000009f631e003, *pmd=0000000000000000
Internal error: Oops: 96000006 [#2] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 2144 Comm: kvm_simplest-ar Tainted: G      D 4.5.0-rc2+ #1300
Hardware name: ARM Juno development board (r1) (DT)
task: ffffffc976da8000 ti: ffffffc976e28000 task.ti: ffffffc976e28000
PC is at vgic_bitmap_get_irq_val+0x78/0x90
LR is at kvm_vgic_map_is_active+0xac/0xc8
pc : [<ffffffc0000b7e28>] lr : [<ffffffc0000b972c>] pstate: 20000145
....
=========

Fix this by bailing out early of kvm_timer_flush_hwstate() if we don't
have a VGIC at all.

Reported-by: Cosmin Gorgovan <cosmin@linux-geek.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 virt/kvm/arm/arch_timer.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -143,7 +143,7 @@ static void kvm_timer_update_irq(struct
  * Check if there was a change in the timer state (should we raise or lower
  * the line level to the GIC).
  */
-static void kvm_timer_update_state(struct kvm_vcpu *vcpu)
+static int kvm_timer_update_state(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
 
@@ -154,10 +154,12 @@ static void kvm_timer_update_state(struc
 	 * until we call this function from kvm_timer_flush_hwstate.
 	 */
 	if (!vgic_initialized(vcpu->kvm))
-	    return;
+		return -ENODEV;
 
 	if (kvm_timer_should_fire(vcpu) != timer->irq.level)
 		kvm_timer_update_irq(vcpu, !timer->irq.level);
+
+	return 0;
 }
 
 /*
@@ -218,7 +220,8 @@ void kvm_timer_flush_hwstate(struct kvm_
 	bool phys_active;
 	int ret;
 
-	kvm_timer_update_state(vcpu);
+	if (kvm_timer_update_state(vcpu))
+		return;
 
 	/*
 	* If we enter the guest with the virtual input level to the VGIC

[PATCH 4.4 088/137] KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Huth <thuth@redhat.com>

commit 760a7364f27d974d100118d88190e574626e18a6 upstream.

In the old DABR register, the BT (Breakpoint Translation) bit
is bit number 61. In the new DAWRX register, the WT (Watchpoint
Translation) bit is bit number 59. So to move the DABR-BT bit
into the position of the DAWRX-WT bit, it has to be shifted by
two, not only by one. This fixes hardware watchpoints in gdb of
older guests that only use the H_SET_DABR/X interface instead
of the new H_SET_MODE interface.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -2153,7 +2153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
 	/* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */
 2:	rlwimi	r5, r4, 5, DAWRX_DR | DAWRX_DW
-	rlwimi	r5, r4, 1, DAWRX_WT
+	rlwimi	r5, r4, 2, DAWRX_WT
 	clrrdi	r4, r4, 3
 	std	r4, VCPU_DAWR(r3)
 	std	r5, VCPU_DAWRX(r3)

[PATCH 4.4 089/137] KVM: PPC: Fix ONE_REG AltiVec support

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kurz <gkurz@linux.vnet.ibm.com>

commit b4d7f161feb3015d6306e1d35b565c888ff70c9d upstream.

The get and set operations got exchanged by mistake when moving the
code from book3s.c to powerpc.c.

Fixes: 3840edc8033ad5b86deee309c1c321ca54257452
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/powerpc.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -919,21 +919,17 @@ int kvm_vcpu_ioctl_get_one_reg(struct kv
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
+			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
-				r = -ENXIO;
-				break;
-			}
-			vcpu->arch.vrsave = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vrsave);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:
@@ -974,17 +970,21 @@ int kvm_vcpu_ioctl_set_one_reg(struct kv
 				r = -ENXIO;
 				break;
 			}
-			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
+			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
+			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			val = get_reg_val(reg->id, vcpu->arch.vrsave);
+			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
+				r = -ENXIO;
+				break;
+			}
+			vcpu->arch.vrsave = set_reg_val(reg->id, val);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:

[PATCH 4.4 090/137] perf kvm record/report: unprocessable sample error while recording/reporting guest data

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>

commit 3caeaa562733c4836e61086ec07666635006a787 upstream.

While recording guest samples in host using perf kvm record, it will
populate unprocessable sample error, though samples will be recorded
properly. While generating report using perf kvm report, no samples will
be processed and same error will populate. We have seen this behaviour
with upstream perf(4.4-rc3) on x86 and ppc64 hardware.

Reason behind this failure is, when it tries to fetch machine from
rb_tree of machines, it fails. As a part of tracing a bug, we figured
out that this code was incorrectly refactored in commit 54245fdc3576
("perf session: Remove wrappers to machines__find").

This patch will change the functionality such that if it can't fetch
machine in first trial, it will create one node of machine and add that to
rb_tree. So next time when it tries to fetch same machine from rb_tree,
it won't fail. Actually it was the case before refactoring of code in
aforementioned commit.

This patch is generated from acme perf/core branch.

Below I've mention an example that demonstrate the behaviour before and
after applying patch.

Before applying patch:
[Note: One needs to run guest before recording data in host]

  ravi@ravi-bangoria:~$ ./perf kvm record -a
  Warning:
  5903 unprocessable samples recorded.
  Do you have a KVM guest running and not using 'perf kvm'?
  [ perf record: Captured and wrote 1.409 MB perf.data.guest (285 samples) ]

  ravi@ravi-bangoria:~$ ./perf kvm report --stdio
  Warning:
  5903 unprocessable samples recorded.
  Do you have a KVM guest running and not using 'perf kvm'?
  # To display the perf.data header info, please use --header/--header-only options.
  #
  # Total Lost Samples: 0
  #
  # Samples: 285  of event 'cycles'
  # Event count (approx.): 88715406
  #
  # Overhead  Command  Shared Object  Symbol
  # ........  .......  .............  ......
  #

  # (For a higher level overview, try: perf report --sort comm,dso)
  #

After applying patch:

  ravi@ravi-bangoria:~$ ./perf kvm record -a
  [ perf record: Captured and wrote 1.188 MB perf.data.guest (17 samples) ]

  ravi@ravi-bangoria:~$ ./perf kvm report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  # Total Lost Samples: 0
  #
  # Samples: 17  of event 'cycles'
  # Event count (approx.): 700746
  #
  # Overhead  Command  Shared Object     Symbol
  # ........  .......  ................  ......................
  #
      34.19%  :5758    [unknown]         [g] 0xffffffff818682ab
      22.79%  :5758    [unknown]         [g] 0xffffffff812dc7f8
      22.79%  :5758    [unknown]         [g] 0xffffffff818650d0
      14.83%  :5758    [unknown]         [g] 0xffffffff8161a1b6
       2.49%  :5758    [unknown]         [g] 0xffffffff818692bf
       0.48%  :5758    [unknown]         [g] 0xffffffff81869253
       0.05%  :5758    [unknown]         [g] 0xffffffff81869250

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 54245fdc3576 ("perf session: Remove wrappers to machines__find")
Link: http://lkml.kernel.org/r/1449471302-11283-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/session.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -972,7 +972,7 @@ static struct machine *machines__find_fo
 
 		machine = machines__find(machines, pid);
 		if (!machine)
-			machine = machines__find(machines, DEFAULT_GUEST_KERNEL_ID);
+			machine = machines__findnew(machines, DEFAULT_GUEST_KERNEL_ID);
 		return machine;
 	}
 

[PATCH 4.4 091/137] mm: soft-offline: check return value in second __get_any_page() call

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

commit d96b339f453997f2f08c52da3f41423be48c978f upstream.

I saw the following BUG_ON triggered in a testcase where a process calls
madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that
calls migratepages command repeatedly (doing ping-pong among different
NUMA nodes) for the first process:

   Soft offlining page 0x60000 at 0x700000600000
   __get_any_page: 0x60000 free buddy page
   page:ffffea0001800000 count:0 mapcount:-127 mapping:          (null) index:0x1
   flags: 0x1fffc0000000000()
   page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
   ------------[ cut here ]------------
   kernel BUG at /src/linux-dev/include/linux/mm.h:342!
   invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
   Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi
   CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G           O    4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74
   Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
   task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000
   RIP: 0010:[<ffffffff8118998c>]  [<ffffffff8118998c>] put_page+0x5c/0x60
   RSP: 0018:ffff88007c213e00  EFLAGS: 00010246
   Call Trace:
     put_hwpoison_page+0x4e/0x80
     soft_offline_page+0x501/0x520
     SyS_madvise+0x6bc/0x6f0
     entry_SYSCALL_64_fastpath+0x12/0x6a
   Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47
   RIP  [<ffffffff8118998c>] put_page+0x5c/0x60
    RSP <ffff88007c213e00>

The root cause resides in get_any_page() which retries to get a refcount
of the page to be soft-offlined.  This function calls
put_hwpoison_page(), expecting that the target page is putback to LRU
list.  But it can be also freed to buddy.  So the second check need to
care about such case.

Fixes: af8fae7c0886 ("mm/memory-failure.c: clean up soft_offline_page()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory-failure.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1572,7 +1572,7 @@ static int get_any_page(struct page *pag
 		 * Did it turn free?
 		 */
 		ret = __get_any_page(page, pfn, 0);
-		if (!PageLRU(page)) {
+		if (ret == 1 && !PageLRU(page)) {
 			/* Drop page reference which is from __get_any_page() */
 			put_hwpoison_page(page);
 			pr_info("soft_offline: %#lx: unknown non LRU page type %lx\n",

[PATCH 4.4 092/137] libnvdimm: fix namespace object confusion in is_uuid_busy()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit e07ecd76d4db7bda1e9495395b2110a3fe28845a upstream.

When btt devices were re-worked to be child devices of regions this
routine was overlooked.  It mistakenly attempts to_nd_namespace_pmem()
or to_nd_namespace_blk() conversions on btt and pfn devices.  By luck to
date we have happened to be hitting valid memory leading to a uuid
miscompare, but a recent change to struct nd_namespace_common causes:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
 IP: [<ffffffff814610dc>] memcmp+0xc/0x40
 [..]
 Call Trace:
  [<ffffffffa0028631>] is_uuid_busy+0xc1/0x2a0 [libnvdimm]
  [<ffffffffa0028570>] ? to_nd_blk_region+0x50/0x50 [libnvdimm]
  [<ffffffff8158c9c0>] device_for_each_child+0x50/0x90

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/namespace_devs.c |   53 +++++++++++++++++++++++++++++++++++++
 drivers/nvdimm/region_devs.c    |   56 ----------------------------------------
 2 files changed, 53 insertions(+), 56 deletions(-)

--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -77,6 +77,59 @@ static bool is_namespace_io(struct devic
 	return dev ? dev->type == &namespace_io_device_type : false;
 }
 
+static int is_uuid_busy(struct device *dev, void *data)
+{
+	u8 *uuid1 = data, *uuid2 = NULL;
+
+	if (is_namespace_pmem(dev)) {
+		struct nd_namespace_pmem *nspm = to_nd_namespace_pmem(dev);
+
+		uuid2 = nspm->uuid;
+	} else if (is_namespace_blk(dev)) {
+		struct nd_namespace_blk *nsblk = to_nd_namespace_blk(dev);
+
+		uuid2 = nsblk->uuid;
+	} else if (is_nd_btt(dev)) {
+		struct nd_btt *nd_btt = to_nd_btt(dev);
+
+		uuid2 = nd_btt->uuid;
+	} else if (is_nd_pfn(dev)) {
+		struct nd_pfn *nd_pfn = to_nd_pfn(dev);
+
+		uuid2 = nd_pfn->uuid;
+	}
+
+	if (uuid2 && memcmp(uuid1, uuid2, NSLABEL_UUID_LEN) == 0)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int is_namespace_uuid_busy(struct device *dev, void *data)
+{
+	if (is_nd_pmem(dev) || is_nd_blk(dev))
+		return device_for_each_child(dev, data, is_uuid_busy);
+	return 0;
+}
+
+/**
+ * nd_is_uuid_unique - verify that no other namespace has @uuid
+ * @dev: any device on a nvdimm_bus
+ * @uuid: uuid to check
+ */
+bool nd_is_uuid_unique(struct device *dev, u8 *uuid)
+{
+	struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev);
+
+	if (!nvdimm_bus)
+		return false;
+	WARN_ON_ONCE(!is_nvdimm_bus_locked(&nvdimm_bus->dev));
+	if (device_for_each_child(&nvdimm_bus->dev, uuid,
+				is_namespace_uuid_busy) != 0)
+		return false;
+	return true;
+}
+
 bool pmem_should_map_pages(struct device *dev)
 {
 	struct nd_region *nd_region = to_nd_region(dev->parent);
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -134,62 +134,6 @@ int nd_region_to_nstype(struct nd_region
 }
 EXPORT_SYMBOL(nd_region_to_nstype);
 
-static int is_uuid_busy(struct device *dev, void *data)
-{
-	struct nd_region *nd_region = to_nd_region(dev->parent);
-	u8 *uuid = data;
-
-	switch (nd_region_to_nstype(nd_region)) {
-	case ND_DEVICE_NAMESPACE_PMEM: {
-		struct nd_namespace_pmem *nspm = to_nd_namespace_pmem(dev);
-
-		if (!nspm->uuid)
-			break;
-		if (memcmp(uuid, nspm->uuid, NSLABEL_UUID_LEN) == 0)
-			return -EBUSY;
-		break;
-	}
-	case ND_DEVICE_NAMESPACE_BLK: {
-		struct nd_namespace_blk *nsblk = to_nd_namespace_blk(dev);
-
-		if (!nsblk->uuid)
-			break;
-		if (memcmp(uuid, nsblk->uuid, NSLABEL_UUID_LEN) == 0)
-			return -EBUSY;
-		break;
-	}
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int is_namespace_uuid_busy(struct device *dev, void *data)
-{
-	if (is_nd_pmem(dev) || is_nd_blk(dev))
-		return device_for_each_child(dev, data, is_uuid_busy);
-	return 0;
-}
-
-/**
- * nd_is_uuid_unique - verify that no other namespace has @uuid
- * @dev: any device on a nvdimm_bus
- * @uuid: uuid to check
- */
-bool nd_is_uuid_unique(struct device *dev, u8 *uuid)
-{
-	struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev);
-
-	if (!nvdimm_bus)
-		return false;
-	WARN_ON_ONCE(!is_nvdimm_bus_locked(&nvdimm_bus->dev));
-	if (device_for_each_child(&nvdimm_bus->dev, uuid,
-				is_namespace_uuid_busy) != 0)
-		return false;
-	return true;
-}
-
 static ssize_t size_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {

[PATCH 4.4 093/137] mm: fix mlock accouting

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit 7162a1e87b3e380133dadc7909081bb70d0a7041 upstream.

Tetsuo Handa reported underflow of NR_MLOCK on munlock.

Testcase:

    #include <stdio.h>
    #include <stdlib.h>
    #include <sys/mman.h>

    #define BASE ((void *)0x400000000000)
    #define SIZE (1UL << 21)

    int main(int argc, char *argv[])
    {
        void *addr;

        system("grep Mlocked /proc/meminfo");
        addr = mmap(BASE, SIZE, PROT_READ | PROT_WRITE,
                MAP_ANONYMOUS | MAP_PRIVATE | MAP_LOCKED | MAP_FIXED,
                -1, 0);
        if (addr == MAP_FAILED)
            printf("mmap() failed\n"), exit(1);
        munmap(addr, SIZE);
        system("grep Mlocked /proc/meminfo");
        return 0;
    }

It happens on munlock_vma_page() due to unfortunate choice of nr_pages
data type:

    __mod_zone_page_state(zone, NR_MLOCK, -nr_pages);

For unsigned int nr_pages, implicitly casted to long in
__mod_zone_page_state(), it becomes something around UINT_MAX.

munlock_vma_page() usually called for THP as small pages go though
pagevec.

Let's make nr_pages signed int.

Similar fixes in 6cdb18ad98a4 ("mm/vmstat: fix overflow in
mod_zone_page_state()") used `long' type, but `int' here is OK for a
count of the number of sub-pages in a huge page.

Fixes: ff6a6da60b89 ("mm: accelerate munlock() treatment of THP pages")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michel Lespinasse <walken@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mlock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -172,7 +172,7 @@ static void __munlock_isolation_failed(s
  */
 unsigned int munlock_vma_page(struct page *page)
 {
-	unsigned int nr_pages;
+	int nr_pages;
 	struct zone *zone = page_zone(page);
 
 	/* For try_to_munlock() and to serialize with page migration */

[PATCH 4.4 094/137] mm: replace vma_lock_anon_vma with anon_vma_lock_read/write

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <koct9i@gmail.com>

commit 12352d3cae2cebe18805a91fab34b534d7444231 upstream.

Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if
anon_vma appeared between lock and unlock.  We have to check anon_vma
first or call anon_vma_prepare() to be sure that it's here.  There are
only few users of these legacy helpers.  Let's get rid of them.

This patch fixes anon_vma lock imbalance in validate_mm().  Write lock
isn't required here, read lock is enough.

And reorders expand_downwards/expand_upwards: security_mmap_addr() and
wrapping-around check don't have to be under anon vma lock.

Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/rmap.h |   14 ------------
 mm/mmap.c            |   55 +++++++++++++++++++++++----------------------------
 2 files changed, 25 insertions(+), 44 deletions(-)

--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -108,20 +108,6 @@ static inline void put_anon_vma(struct a
 		__put_anon_vma(anon_vma);
 }
 
-static inline void vma_lock_anon_vma(struct vm_area_struct *vma)
-{
-	struct anon_vma *anon_vma = vma->anon_vma;
-	if (anon_vma)
-		down_write(&anon_vma->root->rwsem);
-}
-
-static inline void vma_unlock_anon_vma(struct vm_area_struct *vma)
-{
-	struct anon_vma *anon_vma = vma->anon_vma;
-	if (anon_vma)
-		up_write(&anon_vma->root->rwsem);
-}
-
 static inline void anon_vma_lock_write(struct anon_vma *anon_vma)
 {
 	down_write(&anon_vma->root->rwsem);
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -441,12 +441,16 @@ static void validate_mm(struct mm_struct
 	struct vm_area_struct *vma = mm->mmap;
 
 	while (vma) {
+		struct anon_vma *anon_vma = vma->anon_vma;
 		struct anon_vma_chain *avc;
 
-		vma_lock_anon_vma(vma);
-		list_for_each_entry(avc, &vma->anon_vma_chain, same_vma)
-			anon_vma_interval_tree_verify(avc);
-		vma_unlock_anon_vma(vma);
+		if (anon_vma) {
+			anon_vma_lock_read(anon_vma);
+			list_for_each_entry(avc, &vma->anon_vma_chain, same_vma)
+				anon_vma_interval_tree_verify(avc);
+			anon_vma_unlock_read(anon_vma);
+		}
+
 		highest_address = vma->vm_end;
 		vma = vma->vm_next;
 		i++;
@@ -2147,32 +2151,27 @@ static int acct_stack_growth(struct vm_a
 int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	int error;
+	int error = 0;
 
 	if (!(vma->vm_flags & VM_GROWSUP))
 		return -EFAULT;
 
-	/*
-	 * We must make sure the anon_vma is allocated
-	 * so that the anon_vma locking is not a noop.
-	 */
+	/* Guard against wrapping around to address 0. */
+	if (address < PAGE_ALIGN(address+4))
+		address = PAGE_ALIGN(address+4);
+	else
+		return -ENOMEM;
+
+	/* We must make sure the anon_vma is allocated. */
 	if (unlikely(anon_vma_prepare(vma)))
 		return -ENOMEM;
-	vma_lock_anon_vma(vma);
 
 	/*
 	 * vma->vm_start/vm_end cannot change under us because the caller
 	 * is required to hold the mmap_sem in read mode.  We need the
 	 * anon_vma lock to serialize against concurrent expand_stacks.
-	 * Also guard against wrapping around to address 0.
 	 */
-	if (address < PAGE_ALIGN(address+4))
-		address = PAGE_ALIGN(address+4);
-	else {
-		vma_unlock_anon_vma(vma);
-		return -ENOMEM;
-	}
-	error = 0;
+	anon_vma_lock_write(vma->anon_vma);
 
 	/* Somebody else might have raced and expanded it already */
 	if (address > vma->vm_end) {
@@ -2190,7 +2189,7 @@ int expand_upwards(struct vm_area_struct
 				 * updates, but we only hold a shared mmap_sem
 				 * lock here, so we need to protect against
 				 * concurrent vma expansions.
-				 * vma_lock_anon_vma() doesn't help here, as
+				 * anon_vma_lock_write() doesn't help here, as
 				 * we don't guarantee that all growable vmas
 				 * in a mm share the same root anon vma.
 				 * So, we reuse mm->page_table_lock to guard
@@ -2214,7 +2213,7 @@ int expand_upwards(struct vm_area_struct
 			}
 		}
 	}
-	vma_unlock_anon_vma(vma);
+	anon_vma_unlock_write(vma->anon_vma);
 	khugepaged_enter_vma_merge(vma, vma->vm_flags);
 	validate_mm(mm);
 	return error;
@@ -2230,25 +2229,21 @@ int expand_downwards(struct vm_area_stru
 	struct mm_struct *mm = vma->vm_mm;
 	int error;
 
-	/*
-	 * We must make sure the anon_vma is allocated
-	 * so that the anon_vma locking is not a noop.
-	 */
-	if (unlikely(anon_vma_prepare(vma)))
-		return -ENOMEM;
-
 	address &= PAGE_MASK;
 	error = security_mmap_addr(address);
 	if (error)
 		return error;
 
-	vma_lock_anon_vma(vma);
+	/* We must make sure the anon_vma is allocated. */
+	if (unlikely(anon_vma_prepare(vma)))
+		return -ENOMEM;
 
 	/*
 	 * vma->vm_start/vm_end cannot change under us because the caller
 	 * is required to hold the mmap_sem in read mode.  We need the
 	 * anon_vma lock to serialize against concurrent expand_stacks.
 	 */
+	anon_vma_lock_write(vma->anon_vma);
 
 	/* Somebody else might have raced and expanded it already */
 	if (address < vma->vm_start) {
@@ -2266,7 +2261,7 @@ int expand_downwards(struct vm_area_stru
 				 * updates, but we only hold a shared mmap_sem
 				 * lock here, so we need to protect against
 				 * concurrent vma expansions.
-				 * vma_lock_anon_vma() doesn't help here, as
+				 * anon_vma_lock_write() doesn't help here, as
 				 * we don't guarantee that all growable vmas
 				 * in a mm share the same root anon vma.
 				 * So, we reuse mm->page_table_lock to guard
@@ -2288,7 +2283,7 @@ int expand_downwards(struct vm_area_stru
 			}
 		}
 	}
-	vma_unlock_anon_vma(vma);
+	anon_vma_unlock_write(vma->anon_vma);
 	khugepaged_enter_vma_merge(vma, vma->vm_flags);
 	validate_mm(mm);
 	return error;

[PATCH 4.4 095/137] mm: fix regression in remap_file_pages() emulation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit 48f7df329474b49d83d0dffec1b6186647f11976 upstream.

Grazvydas Ignotas has reported a regression in remap_file_pages()
emulation.

Testcase:
	#define _GNU_SOURCE
	#include <assert.h>
	#include <stdlib.h>
	#include <stdio.h>
	#include <sys/mman.h>

	#define SIZE    (4096 * 3)

	int main(int argc, char **argv)
	{
		unsigned long *p;
		long i;

		p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
				MAP_SHARED | MAP_ANONYMOUS, -1, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			return -1;
		}

		for (i = 0; i < SIZE / 4096; i++)
			p[i * 4096 / sizeof(*p)] = i;

		if (remap_file_pages(p, 4096, 0, 1, 0)) {
			perror("remap_file_pages");
			return -1;
		}

		if (remap_file_pages(p, 4096 * 2, 0, 1, 0)) {
			perror("remap_file_pages");
			return -1;
		}

		assert(p[0] == 1);

		munmap(p, SIZE);

		return 0;
	}

The second remap_file_pages() fails with -EINVAL.

The reason is that remap_file_pages() emulation assumes that the target
vma covers whole area we want to over map.  That assumption is broken by
first remap_file_pages() call: it split the area into two vma.

The solution is to check next adjacent vmas, if they map the same file
with the same flags.

Fixes: c8d78c1823f4 ("mm: replace remap_file_pages() syscall with emulation")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mmap.c |   34 +++++++++++++++++++++++++++++-----
 1 file changed, 29 insertions(+), 5 deletions(-)

--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2668,12 +2668,29 @@ SYSCALL_DEFINE5(remap_file_pages, unsign
 	if (!vma || !(vma->vm_flags & VM_SHARED))
 		goto out;
 
-	if (start < vma->vm_start || start + size > vma->vm_end)
+	if (start < vma->vm_start)
 		goto out;
 
-	if (pgoff == linear_page_index(vma, start)) {
-		ret = 0;
-		goto out;
+	if (start + size > vma->vm_end) {
+		struct vm_area_struct *next;
+
+		for (next = vma->vm_next; next; next = next->vm_next) {
+			/* hole between vmas ? */
+			if (next->vm_start != next->vm_prev->vm_end)
+				goto out;
+
+			if (next->vm_file != vma->vm_file)
+				goto out;
+
+			if (next->vm_flags != vma->vm_flags)
+				goto out;
+
+			if (start + size <= next->vm_end)
+				break;
+		}
+
+		if (!next)
+			goto out;
 	}
 
 	prot |= vma->vm_flags & VM_READ ? PROT_READ : 0;
@@ -2683,9 +2700,16 @@ SYSCALL_DEFINE5(remap_file_pages, unsign
 	flags &= MAP_NONBLOCK;
 	flags |= MAP_SHARED | MAP_FIXED | MAP_POPULATE;
 	if (vma->vm_flags & VM_LOCKED) {
+		struct vm_area_struct *tmp;
 		flags |= MAP_LOCKED;
+
 		/* drop PG_Mlocked flag for over-mapped range */
-		munlock_vma_pages_range(vma, start, start + size);
+		for (tmp = vma; tmp->vm_start >= start + size;
+				tmp = tmp->vm_next) {
+			munlock_vma_pages_range(tmp,
+					max(tmp->vm_start, start),
+					min(tmp->vm_end, start + size));
+		}
 	}
 
 	file = get_file(vma->vm_file);

[PATCH 4.4 096/137] Input: elantech - mark protocols v2 and v3 as semi-mt

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream.

When using a protocol v2 or v3 hardware, elantech uses the function
elantech_report_semi_mt_data() to report data. This devices are rather
creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid
touch is reported.

Anyway, userspace (libinput) is now confused by these (0,0) touches,
and detect them as palm, and rejects them.

Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW")
was sufficient enough for xf86-input-synaptics and libinput before it has
palm rejection. Now we need to actually tell libinput that this device is
a semi-mt one and it should not rely on the actual values of the 2 touches.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/elantech.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1222,7 +1222,7 @@ static int elantech_set_input_params(str
 			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
 					     ETP_WMAX_V2, 0, 0);
 		}
-		input_mt_init_slots(dev, 2, 0);
+		input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
 		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
 		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
 		break;

[PATCH 4.4 098/137] string_helpers: fix precision loss for some inputs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Odin.com>

commit 564b026fbd0d28e9f70fb3831293d2922bb7855b upstream.

It was noticed that we lose precision in the final calculation for some
inputs.  The most egregious example is size=3000 blk_size=1900 in units
of 10 should yield 5.70 MB but in fact yields 3.00 MB (oops).

This is because the current algorithm doesn't correctly account for
all the remainders in the logarithms.  Fix this by doing a correct
calculation in the remainders based on napier's algorithm.

Additionally, now we have the correct result, we have to account for
arithmetic rounding because we're printing 3 digits of precision.  This
means that if the fourth digit is five or greater, we have to round up,
so add a section to ensure correct rounding.  Finally account for all
possible inputs correctly, including zero for block size.

Fixes: b9f28d863594c429e1df35a0474d2663ca28b307
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/string_helpers.c |   63 ++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 43 insertions(+), 20 deletions(-)

--- a/lib/string_helpers.c
+++ b/lib/string_helpers.c
@@ -43,50 +43,73 @@ void string_get_size(u64 size, u64 blk_s
 		[STRING_UNITS_10] = 1000,
 		[STRING_UNITS_2] = 1024,
 	};
-	int i, j;
-	u32 remainder = 0, sf_cap, exp;
+	static const unsigned int rounding[] = { 500, 50, 5 };
+	int i = 0, j;
+	u32 remainder = 0, sf_cap;
 	char tmp[8];
 	const char *unit;
 
 	tmp[0] = '\0';
-	i = 0;
-	if (!size)
+
+	if (blk_size == 0)
+		size = 0;
+	if (size == 0)
 		goto out;
 
-	while (blk_size >= divisor[units]) {
-		remainder = do_div(blk_size, divisor[units]);
+	/* This is Napier's algorithm.  Reduce the original block size to
+	 *
+	 * coefficient * divisor[units]^i
+	 *
+	 * we do the reduction so both coefficients are just under 32 bits so
+	 * that multiplying them together won't overflow 64 bits and we keep
+	 * as much precision as possible in the numbers.
+	 *
+	 * Note: it's safe to throw away the remainders here because all the
+	 * precision is in the coefficients.
+	 */
+	while (blk_size >> 32) {
+		do_div(blk_size, divisor[units]);
 		i++;
 	}
 
-	exp = divisor[units] / (u32)blk_size;
-	/*
-	 * size must be strictly greater than exp here to ensure that remainder
-	 * is greater than divisor[units] coming out of the if below.
-	 */
-	if (size > exp) {
-		remainder = do_div(size, divisor[units]);
-		remainder *= blk_size;
+	while (size >> 32) {
+		do_div(size, divisor[units]);
 		i++;
-	} else {
-		remainder *= size;
 	}
 
+	/* now perform the actual multiplication keeping i as the sum of the
+	 * two logarithms */
 	size *= blk_size;
-	size += remainder / divisor[units];
-	remainder %= divisor[units];
 
+	/* and logarithmically reduce it until it's just under the divisor */
 	while (size >= divisor[units]) {
 		remainder = do_div(size, divisor[units]);
 		i++;
 	}
 
+	/* work out in j how many digits of precision we need from the
+	 * remainder */
 	sf_cap = size;
 	for (j = 0; sf_cap*10 < 1000; j++)
 		sf_cap *= 10;
 
-	if (j) {
+	if (units == STRING_UNITS_2) {
+		/* express the remainder as a decimal.  It's currently the
+		 * numerator of a fraction whose denominator is
+		 * divisor[units], which is 1 << 10 for STRING_UNITS_2 */
 		remainder *= 1000;
-		remainder /= divisor[units];
+		remainder >>= 10;
+	}
+
+	/* add a 5 to the digit below what will be printed to ensure
+	 * an arithmetical round up and carry it through to size */
+	remainder += rounding[j];
+	if (remainder >= 1000) {
+		remainder -= 1000;
+		size += 1;
+	}
+
+	if (j) {
 		snprintf(tmp, sizeof(tmp), ".%03u", remainder);
 		tmp[j+1] = '\0';
 	}

[PATCH 4.4 099/137] Input: vmmouse - fix absolute device registration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit d4f1b06d685d11ebdaccf11c0db1cb3c78736862 upstream.

We should set device's capabilities first, and then register it,
otherwise various handlers already present in the kernel will not be
able to connect to the device.

Reported-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/vmmouse.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -458,8 +458,6 @@ int vmmouse_init(struct psmouse *psmouse
 	priv->abs_dev = abs_dev;
 	psmouse->private = priv;
 
-	input_set_capability(rel_dev, EV_REL, REL_WHEEL);
-
 	/* Set up and register absolute device */
 	snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
 		 psmouse->ps2dev.serio->phys);
@@ -475,10 +473,6 @@ int vmmouse_init(struct psmouse *psmouse
 	abs_dev->id.version = psmouse->model;
 	abs_dev->dev.parent = &psmouse->ps2dev.serio->dev;
 
-	error = input_register_device(priv->abs_dev);
-	if (error)
-		goto init_fail;
-
 	/* Set absolute device capabilities */
 	input_set_capability(abs_dev, EV_KEY, BTN_LEFT);
 	input_set_capability(abs_dev, EV_KEY, BTN_RIGHT);
@@ -488,6 +482,13 @@ int vmmouse_init(struct psmouse *psmouse
 	input_set_abs_params(abs_dev, ABS_X, 0, VMMOUSE_MAX_X, 0, 0);
 	input_set_abs_params(abs_dev, ABS_Y, 0, VMMOUSE_MAX_Y, 0, 0);
 
+	error = input_register_device(priv->abs_dev);
+	if (error)
+		goto init_fail;
+
+	/* Add wheel capability to the relative device */
+	input_set_capability(rel_dev, EV_REL, REL_WHEEL);
+
 	psmouse->protocol_handler = vmmouse_process_byte;
 	psmouse->disconnect = vmmouse_disconnect;
 	psmouse->reconnect = vmmouse_reconnect;

[PATCH 4.4 100/137] iommu/vt-d: Dont skip PCI devices when disabling IOTLB

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy McNicoll <jmcnicol@redhat.com>

commit da972fb13bc5a1baad450c11f9182e4cd0a091f6 upstream.

Fix a simple typo when disabling IOTLB on PCI(e) devices.

Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS")
Signed-off-by: Jeremy McNicoll <jmcnicol@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1489,7 +1489,7 @@ static void iommu_disable_dev_iotlb(stru
 {
 	struct pci_dev *pdev;
 
-	if (dev_is_pci(info->dev))
+	if (!dev_is_pci(info->dev))
 		return;
 
 	pdev = to_pci_dev(info->dev);

[PATCH 4.4 101/137] iommu/amd: Correct the wrong setting of alias DTE in do_attach

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baoquan He <bhe@redhat.com>

commit 9b1a12d29109234d2b9718d04d4d404b7da4e794 upstream.

In below commit alias DTE is set when its peripheral is
setting DTE. However there's a code bug here to wrongly
set the alias DTE, correct it in this patch.

commit e25bfb56ea7f046b71414e02f80f620deb5c6362
Author: Joerg Roedel <jroedel@suse.de>
Date:   Tue Oct 20 17:33:38 2015 +0200

    iommu/amd: Set alias DTE in do_attach/do_detach

Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1905,7 +1905,7 @@ static void do_attach(struct iommu_dev_d
 	/* Update device table */
 	set_dte_entry(dev_data->devid, domain, ats);
 	if (alias != dev_data->devid)
-		set_dte_entry(dev_data->devid, domain, ats);
+		set_dte_entry(alias, domain, ats);
 
 	device_flush_dte(dev_data);
 }

[PATCH 4.4 103/137] iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: CQ Tang <cq.tang@intel.com>

commit fda3bec12d0979aae3f02ee645913d66fbc8a26e upstream.

This is a 32-bit register. Apparently harmless on real hardware, but
causing justified warnings in simulation.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/dmar.c                |    2 +-
 drivers/iommu/intel_irq_remapping.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1347,7 +1347,7 @@ void dmar_disable_qi(struct intel_iommu
 
 	raw_spin_lock_irqsave(&iommu->register_lock, flags);
 
-	sts =  dmar_readq(iommu->reg + DMAR_GSTS_REG);
+	sts =  readl(iommu->reg + DMAR_GSTS_REG);
 	if (!(sts & DMA_GSTS_QIES))
 		goto end;
 
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -629,7 +629,7 @@ static void iommu_disable_irq_remapping(
 
 	raw_spin_lock_irqsave(&iommu->register_lock, flags);
 
-	sts = dmar_readq(iommu->reg + DMAR_GSTS_REG);
+	sts = readl(iommu->reg + DMAR_GSTS_REG);
 	if (!(sts & DMA_GSTS_IRES))
 		goto end;
 

[PATCH 4.4 104/137] iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Woodhouse <David.Woodhouse@intel.com>

commit 46924008273ed03bd11dbb32136e3da4cfe056e1 upstream.

According to the VT-d specification we need to clear the PPR bit in
the Page Request Status register when handling page requests, or the
hardware won't generate any more interrupts.

This wasn't actually necessary on SKL/KBL (which may well be the
subject of a hardware erratum, although it's harmless enough). But
other implementations do appear to get it right, and we only ever get
one interrupt unless we clear the PPR bit.

Reported-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-svm.c   |    4 ++++
 include/linux/intel-iommu.h |    3 +++
 2 files changed, 7 insertions(+)

--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -524,6 +524,10 @@ static irqreturn_t prq_event_thread(int
 	struct intel_svm *svm = NULL;
 	int head, tail, handled = 0;
 
+	/* Clear PPR bit before reading head/tail registers, to
+	 * ensure that we get a new interrupt if needed. */
+	writel(DMA_PRS_PPR, iommu->reg + DMAR_PRS_REG);
+
 	tail = dmar_readq(iommu->reg + DMAR_PQT_REG) & PRQ_RING_MASK;
 	head = dmar_readq(iommu->reg + DMAR_PQH_REG) & PRQ_RING_MASK;
 	while (head != tail) {
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -235,6 +235,9 @@ static inline void dmar_writeq(void __io
 /* low 64 bit */
 #define dma_frcd_page_addr(d) (d & (((u64)-1) << PAGE_SHIFT))
 
+/* PRS_REG */
+#define DMA_PRS_PPR	((u32)1)
+
 #define IOMMU_WAIT_OP(iommu, offset, op, cond, sts)			\
 do {									\
 	cycles_t start_time = get_cycles();				\

[PATCH 4.4 105/137] Revert "xhci: dont finish a TD if we get a short-transfer event mid TD"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit a6835090716a85f2297668ba593bd00e1051e662 upstream.

This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a
short transfer event mid TD")

Turns out that most host controllers do not follow the xHCI specs and never
send the second event for the last TRB in the TD if there was a short event
mid-TD.

Returning the URB directly after the first short-transfer event is far
better than never returning the URB. (class drivers usually timeout
after 30sec). For the hosts that do send the second event we will go
back to treating it as misplaced event and print an error message for it.

The origial patch was sent to stable kernels and needs to be reverted from
there as well

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |   10 ----------
 1 file changed, 10 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2192,10 +2192,6 @@ static int process_bulk_intr_td(struct x
 		}
 	/* Fast path - was this the last TRB in the TD for this URB? */
 	} else if (event_trb == td->last_trb) {
-		if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX)
-			return finish_td(xhci, td, event_trb, event, ep,
-					 status, false);
-
 		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			td->urb->actual_length =
 				td->urb->transfer_buffer_length -
@@ -2247,12 +2243,6 @@ static int process_bulk_intr_td(struct x
 			td->urb->actual_length +=
 				TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
 				EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
-
-		if (trb_comp_code == COMP_SHORT_TX) {
-			xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n");
-			td->urb_length_set = true;
-			return 0;
-		}
 	}
 
 	return finish_td(xhci, td, event_trb, event, ep, status, false);

[PATCH 4.4 106/137] xhci: Fix list corruption in urb dequeue at host removal

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 5c82171167adb8e4ac77b91a42cd49fb211a81a0 upstream.

xhci driver frees data for all devices, both usb2 and and usb3 the
first time usb_remove_hcd() is called, including td_list and and xhci_ring
structures.

When usb_remove_hcd() is called a second time for the second xhci bus it
will try to dequeue all pending urbs, and touches td_list which is already
freed for that endpoint.

Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,7 +1549,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd
 		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 				"HW died, freeing TD.");
 		urb_priv = urb->hcpriv;
-		for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+		for (i = urb_priv->td_cnt;
+		     i < urb_priv->length && xhci->devs[urb->dev->slot_id];
+		     i++) {
 			td = urb_priv->td[i];
 			if (!list_empty(&td->td_list))
 				list_del_init(&td->td_list);

[PATCH 4.4 107/137] m32r: fix m32104ut_defconfig build fail

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

commit 601f1db653217f205ffa5fb33514b4e1711e56d1 upstream.

The build of m32104ut_defconfig for m32r arch was failing for long long
time with the error:

  ERROR: "memory_start" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_start" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined!
  ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined!

As done in other architectures export the symbols to fix the error.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/m32r/kernel/setup.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -81,7 +81,10 @@ static struct resource code_resource = {
 };
 
 unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+
 unsigned long memory_end;
+EXPORT_SYMBOL(memory_end);
 
 void __init setup_arch(char **);
 int get_cpuinfo(char *);

[PATCH 4.4 108/137] dma-debug: switch check from _text to _stext

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laura Abbott <labbott@fedoraproject.org>

commit ea535e418c01837d07b6c94e817540f50bfdadb0 upstream.

In include/asm-generic/sections.h:

  /*
   * Usage guidelines:
   * _text, _data: architecture specific, don't use them in
   * arch-independent code
   * [_stext, _etext]: contains .text.* sections, may also contain
   * .rodata.*
   *                   and/or .init.* sections

_text is not guaranteed across architectures.  Architectures such as ARM
may reuse parts which are not actually text and erroneously trigger a bug.
Switch to using _stext which is guaranteed to contain text sections.

Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com>

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/dma-debug.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -1181,7 +1181,7 @@ static inline bool overlap(void *addr, u
 
 static void check_for_illegal_area(struct device *dev, void *addr, unsigned long len)
 {
-	if (overlap(addr, len, _text, _etext) ||
+	if (overlap(addr, len, _stext, _etext) ||
 	    overlap(addr, len, __start_rodata, __end_rodata))
 		err_printk(dev, NULL, "DMA-API: device driver maps memory from kernel text or rodata [addr=%p] [len=%lu]\n", addr, len);
 }

[PATCH 4.4 109/137] scripts/bloat-o-meter: fix python3 syntax error

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>

commit 72214a24a7677d4c7501eecc9517ed681b5f2db2 upstream.

In Python3+ print is a function so the old syntax is not correct
anymore:

  $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old
    File "./scripts/bloat-o-meter", line 61
      print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
                                                                     ^
  SyntaxError: invalid syntax

Fix by calling print as a function.

Tested on python 2.7.11, 3.5.1

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/bloat-o-meter |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/scripts/bloat-o-meter
+++ b/scripts/bloat-o-meter
@@ -58,8 +58,8 @@ for name in common:
 delta.sort()
 delta.reverse()
 
-print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
-      (add, remove, grow, shrink, up, -down, up-down)
-print "%-40s %7s %7s %+7s" % ("function", "old", "new", "delta")
+print("add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
+      (add, remove, grow, shrink, up, -down, up-down))
+print("%-40s %7s %7s %+7s" % ("function", "old", "new", "delta"))
 for d, n in delta:
-    if d: print "%-40s %7s %7s %+7d" % (n, old.get(n,"-"), new.get(n,"-"), d)
+    if d: print("%-40s %7s %7s %+7d" % (n, old.get(n,"-"), new.get(n,"-"), d))

[PATCH 4.4 110/137] fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Kravetz <mike.kravetz@oracle.com>

commit 9aacdd354d197ad64685941b36d28ea20ab88757 upstream.

Hillf Danton noticed bugs in the hugetlb_vmtruncate_list routine.  The
argument end is of type pgoff_t.  It was being converted to a vaddr
offset and passed to unmap_hugepage_range.  However, end was also being
used as an argument to the vma_interval_tree_foreach controlling loop.
In addition, the conversion of end to vaddr offset was incorrect.

hugetlb_vmtruncate_list is called as part of a file truncate or
fallocate hole punch operation.

When truncating a hugetlbfs file, this bug could prevent some pages from
being unmapped.  This is possible if there are multiple vmas mapping the
file, and there is a sufficiently sized hole between the mappings.  The
size of the hole between two vmas (A,B) must be such that the starting
virtual address of B is greater than (ending virtual address of A <<
PAGE_SHIFT).  In this case, the pages in B would not be unmapped.  If
pages are not properly unmapped during truncate, the following BUG is
hit:

	kernel BUG at fs/hugetlbfs/inode.c:428!

In the fallocate hole punch case, this bug could prevent pages from
being unmapped as in the truncate case.  However, for hole punch the
result is that unmapped pages will not be removed during the operation.
For hole punch, it is also possible that more pages than desired will be
unmapped.  This unnecessary unmapping will cause page faults to
reestablish the mappings on subsequent page access.

Fixes: 1bfad99ab (" hugetlbfs: hugetlb_vmtruncate_list() needs to take a range")Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hugetlbfs/inode.c |   19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -463,6 +463,7 @@ hugetlb_vmdelete_list(struct rb_root *ro
 	 */
 	vma_interval_tree_foreach(vma, root, start, end ? end : ULONG_MAX) {
 		unsigned long v_offset;
+		unsigned long v_end;
 
 		/*
 		 * Can the expression below overflow on 32-bit arches?
@@ -475,15 +476,17 @@ hugetlb_vmdelete_list(struct rb_root *ro
 		else
 			v_offset = 0;
 
-		if (end) {
-			end = ((end - start) << PAGE_SHIFT) +
-			       vma->vm_start + v_offset;
-			if (end > vma->vm_end)
-				end = vma->vm_end;
-		} else
-			end = vma->vm_end;
+		if (!end)
+			v_end = vma->vm_end;
+		else {
+			v_end = ((end - vma->vm_pgoff) << PAGE_SHIFT)
+							+ vma->vm_start;
+			if (v_end > vma->vm_end)
+				v_end = vma->vm_end;
+		}
 
-		unmap_hugepage_range(vma, vma->vm_start + v_offset, end, NULL);
+		unmap_hugepage_range(vma, vma->vm_start + v_offset, v_end,
+									NULL);
 	}
 }
 

[PATCH 4.4 111/137] numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Holzheu <holzheu@linux.vnet.ibm.com>

commit 5c2ff95e41c9290d16556cd02e35b25d81be8fe0 upstream.

When working with hugetlbfs ptes (which are actually pmds) is not valid to
directly use pte functions like pte_present() because the hardware bit
layout of pmds and ptes can be different.  This is the case on s390.
Therefore we have to convert the hugetlbfs ptes first into a valid pte
encoding with huge_ptep_get().

Currently the /proc/<pid>/numa_maps code uses hugetlbfs ptes without
huge_ptep_get().  On s390 this leads to the following two problems:

1) The pte_present() function returns false (instead of true) for
   PROT_NONE hugetlb ptes. Therefore PROT_NONE vmas are missing
   completely in the "numa_maps" output.

2) The pte_dirty() function always returns false for all hugetlb ptes.
   Therefore these pages are reported as "mapped=xxx" instead of
   "dirty=xxx".

Therefore use huge_ptep_get() to correctly convert the hugetlb ptes.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/task_mmu.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -1473,18 +1473,19 @@ static int gather_pte_stats(pmd_t *pmd,
 static int gather_hugetlb_stats(pte_t *pte, unsigned long hmask,
 		unsigned long addr, unsigned long end, struct mm_walk *walk)
 {
+	pte_t huge_pte = huge_ptep_get(pte);
 	struct numa_maps *md;
 	struct page *page;
 
-	if (!pte_present(*pte))
+	if (!pte_present(huge_pte))
 		return 0;
 
-	page = pte_page(*pte);
+	page = pte_page(huge_pte);
 	if (!page)
 		return 0;
 
 	md = walk->private;
-	gather_stats(page, md, pte_dirty(*pte), 1);
+	gather_stats(page, md, pte_dirty(huge_pte), 1);
 	return 0;
 }
 

[PATCH 4.4 112/137] memcg: only free spare array when readers are done

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martijn Coenen <maco@google.com>

commit 6611d8d76132f86faa501de9451a89bf23fb2371 upstream.

A spare array holding mem cgroup threshold events is kept around to make
sure we can always safely deregister an event and have an array to store
the new set of events in.

In the scenario where we're going from 1 to 0 registered events, the
pointer to the primary array containing 1 event is copied to the spare
slot, and then the spare slot is freed because no events are left.
However, it is freed before calling synchronize_rcu(), which means
readers may still be accessing threshold->primary after it is freed.

Fixed by only freeing after synchronize_rcu().

Signed-off-by: Martijn Coenen <maco@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3522,16 +3522,17 @@ static void __mem_cgroup_usage_unregiste
 swap_buffers:
 	/* Swap primary and spare array */
 	thresholds->spare = thresholds->primary;
-	/* If all events are unregistered, free the spare array */
-	if (!new) {
-		kfree(thresholds->spare);
-		thresholds->spare = NULL;
-	}
 
 	rcu_assign_pointer(thresholds->primary, new);
 
 	/* To be sure that nobody uses thresholds */
 	synchronize_rcu();
+
+	/* If all events are unregistered, free the spare array */
+	if (!new) {
+		kfree(thresholds->spare);
+		thresholds->spare = NULL;
+	}
 unlock:
 	mutex_unlock(&memcg->thresholds_lock);
 }

[PATCH 4.4 113/137] MAINTAINERS: return arch/sh to maintained state, with new maintainers

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rich Felker <dalias@libc.org>

commit 114bf37e04d839b555b3dc460b5e6ce156f49cf0 upstream.

Add Yoshinori Sato and Rich Felker as maintainers for arch/sh
(SUPERH).

Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: D. Jeff Dionne <jeff@uClinux.org>
Acked-by: Rob Landley <rob@landley.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 MAINTAINERS |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10289,9 +10289,11 @@ S:	Maintained
 F:	drivers/net/ethernet/dlink/sundance.c
 
 SUPERH
+M:	Yoshinori Sato <ysato@users.sourceforge.jp>
+M:	Rich Felker <dalias@libc.org>
 L:	linux-sh@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-S:	Orphan
+S:	Maintained
 F:	Documentation/sh/
 F:	arch/sh/
 F:	drivers/sh/

[PATCH 4.4 114/137] radix-tree: fix race in gang lookup

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <willy@linux.intel.com>

commit 46437f9a554fbe3e110580ca08ab703b59f2f95a upstream.

If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup.  Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.

This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0.  The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.

Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/radix-tree.h |   16 ++++++++++++++++
 lib/radix-tree.c           |   12 ++++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -370,6 +370,22 @@ void **radix_tree_next_chunk(struct radi
 			     struct radix_tree_iter *iter, unsigned flags);
 
 /**
+ * radix_tree_iter_retry - retry this chunk of the iteration
+ * @iter:	iterator state
+ *
+ * If we iterate over a tree protected only by the RCU lock, a race
+ * against deletion or creation may result in seeing a slot for which
+ * radix_tree_deref_retry() returns true.  If so, call this function
+ * and continue the iteration.
+ */
+static inline __must_check
+void **radix_tree_iter_retry(struct radix_tree_iter *iter)
+{
+	iter->next_index = iter->index;
+	return NULL;
+}
+
+/**
  * radix_tree_chunk_size - get current chunk size
  *
  * @iter:	pointer to radix tree iterator
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -1019,9 +1019,13 @@ radix_tree_gang_lookup(struct radix_tree
 		return 0;
 
 	radix_tree_for_each_slot(slot, root, &iter, first_index) {
-		results[ret] = indirect_to_ptr(rcu_dereference_raw(*slot));
+		results[ret] = rcu_dereference_raw(*slot);
 		if (!results[ret])
 			continue;
+		if (radix_tree_is_indirect_ptr(results[ret])) {
+			slot = radix_tree_iter_retry(&iter);
+			continue;
+		}
 		if (++ret == max_items)
 			break;
 	}
@@ -1098,9 +1102,13 @@ radix_tree_gang_lookup_tag(struct radix_
 		return 0;
 
 	radix_tree_for_each_tagged(slot, root, &iter, first_index, tag) {
-		results[ret] = indirect_to_ptr(rcu_dereference_raw(*slot));
+		results[ret] = rcu_dereference_raw(*slot);
 		if (!results[ret])
 			continue;
+		if (radix_tree_is_indirect_ptr(results[ret])) {
+			slot = radix_tree_iter_retry(&iter);
+			continue;
+		}
 		if (++ret == max_items)
 			break;
 	}

[PATCH 4.4 115/137] drivers/hwspinlock: fix race between radix tree insertion and lookup

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <willy@linux.intel.com>

commit c6400ba7e13a41539342f1b6e1f9e78419cb0148 upstream.

of_hwspin_lock_get_id() is protected by the RCU lock, which means that
insertions can occur simultaneously with the lookup.  If the radix tree
transitions from a height of 0, we can see a slot with the indirect_ptr
bit set, which will cause us to at least read random memory, and could
cause other havoc.

Fix this by using the newly introduced radix_tree_iter_retry().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwspinlock/hwspinlock_core.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -313,6 +313,10 @@ int of_hwspin_lock_get_id(struct device_
 		hwlock = radix_tree_deref_slot(slot);
 		if (unlikely(!hwlock))
 			continue;
+		if (radix_tree_is_indirect_ptr(hwlock)) {
+			slot = radix_tree_iter_retry(&iter);
+			continue;
+		}
 
 		if (hwlock->bank->dev->of_node == args.np) {
 			ret = 0;

[PATCH 4.4 116/137] radix-tree: fix oops after radix_tree_iter_retry

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <koct9i@gmail.com>

commit 732042821cfa106b3c20b9780e4c60fee9d68900 upstream.

Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero.  This
isn't checked and it tries to dereference null pointer in slot.

Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.

Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/radix-tree.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -391,7 +391,7 @@ void **radix_tree_iter_retry(struct radi
  * @iter:	pointer to radix tree iterator
  * Returns:	current chunk size
  */
-static __always_inline unsigned
+static __always_inline long
 radix_tree_chunk_size(struct radix_tree_iter *iter)
 {
 	return iter->next_index - iter->index;
@@ -425,9 +425,9 @@ radix_tree_next_slot(void **slot, struct
 			return slot + offset + 1;
 		}
 	} else {
-		unsigned size = radix_tree_chunk_size(iter) - 1;
+		long size = radix_tree_chunk_size(iter);
 
-		while (size--) {
+		while (--size > 0) {
 			slot++;
 			iter->index++;
 			if (likely(*slot))

[PATCH 4.4 117/137] dump_stack: avoid potential deadlocks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit d7ce36924344ace0dbdc855b1206cacc46b36d45 upstream.

Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().

The checksumming bug was fixed in commit 34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").

The second problem is a faulty locking in dump_stack()

CPU1 runs in process context and calls dump_stack(), grabs dump_lock.

   CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
   call dump_stack() from netdev_rx_csum_fault().

   dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
   dump_lock is owned by CPU1

While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.

CPU1 spins forever in spin_lock() : deadlock

Stack trace on CPU1 looked like :

    NMI backtrace for cpu 1
    RIP: _raw_spin_lock+0x25/0x30
    ...
    Call Trace:
      <IRQ>
      tcp_v6_rcv+0x243/0x620
      ip6_input_finish+0x11f/0x330
      ip6_input+0x38/0x40
      ip6_rcv_finish+0x3c/0x90
      ipv6_rcv+0x2a9/0x500
      process_backlog+0x461/0xaa0
      net_rx_action+0x147/0x430
      __do_softirq+0x167/0x2d0
      call_softirq+0x1c/0x30
      do_softirq+0x3f/0x80
      irq_exit+0x6e/0xc0
      smp_call_function_single_interrupt+0x35/0x40
      call_function_single_interrupt+0x6a/0x70
      <EOI>
      printk+0x4d/0x4f
      printk_address+0x31/0x33
      print_trace_address+0x33/0x3c
      print_context_stack+0x7f/0x119
      dump_trace+0x26b/0x28e
      show_trace_log_lvl+0x4f/0x5c
      show_stack_log_lvl+0x104/0x113
      show_stack+0x42/0x44
      dump_stack+0x46/0x58
      netdev_rx_csum_fault+0x38/0x3c
      __skb_checksum_complete_head+0x6e/0x80
      __skb_checksum_complete+0x11/0x20
      tcp_rcv_established+0x2bd5/0x2fd0
      tcp_v6_do_rcv+0x13c/0x620
      sk_backlog_rcv+0x15/0x30
      release_sock+0xd2/0x150
      tcp_recvmsg+0x1c1/0xfc0
      inet_recvmsg+0x7d/0x90
      sock_recvmsg+0xaf/0xe0
      ___sys_recvmsg+0x111/0x3b0
      SyS_recvmsg+0x5c/0xb0
      system_call_fastpath+0x16/0x1b

Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/dump_stack.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -25,6 +25,7 @@ static atomic_t dump_lock = ATOMIC_INIT(
 
 asmlinkage __visible void dump_stack(void)
 {
+	unsigned long flags;
 	int was_locked;
 	int old;
 	int cpu;
@@ -33,9 +34,8 @@ asmlinkage __visible void dump_stack(voi
 	 * Permit this cpu to perform nested stack dumps while serialising
 	 * against other CPUs
 	 */
-	preempt_disable();
-
 retry:
+	local_irq_save(flags);
 	cpu = smp_processor_id();
 	old = atomic_cmpxchg(&dump_lock, -1, cpu);
 	if (old == -1) {
@@ -43,6 +43,7 @@ retry:
 	} else if (old == cpu) {
 		was_locked = 1;
 	} else {
+		local_irq_restore(flags);
 		cpu_relax();
 		goto retry;
 	}
@@ -52,7 +53,7 @@ retry:
 	if (!was_locked)
 		atomic_set(&dump_lock, -1);
 
-	preempt_enable();
+	local_irq_restore(flags);
 }
 #else
 asmlinkage __visible void dump_stack(void)

[PATCH 4.4 118/137] mm,thp: khugepaged: call pte flush at the time of collapse

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vineet Gupta <Vineet.Gupta1@synopsys.com>

commit 6a6ac72fd6ea32594b316513e1826c3f6db4cc93 upstream.

This showed up on ARC when running LMBench bw_mem tests as Overlapping
TLB Machine Check Exception triggered due to STLB entry (2M pages)
overlapping some NTLB entry (regular 8K page).

bw_mem 2m touches a large chunk of vaddr creating NTLB entries.  In the
interim khugepaged kicks in, collapsing the contiguous ptes into a
single pmd.  pmdp_collapse_flush()->flush_pmd_tlb_range() is called to
flush out NTLB entries for the ptes.  This for ARC (by design) can only
shootdown STLB entries (for pmd).  The stray NTLB entries cause the
overlap with the subsequent STLB entry for collapsed page.  So make
pmdp_collapse_flush() call pte flush interface not pmd flush.

Note that originally all thp flush call sites in generic code called
flush_tlb_range() leaving it to architecture to implement the flush for
pte and/or pmd.  Commit 12ebc1581ad11454 changed this by calling a new
opt-in API flush_pmd_tlb_range() which made the semantics more explicit
but failed to distinguish the pte vs pmd flush in generic code, which is
what this patch fixes.

Note that ARC can fixed w/o touching the generic pmdp_collapse_flush()
by defining a ARC version, but that defeats the purpose of generic
version, plus sementically this is the right thing to do.

Fixes STAR 9000961194: LMBench on AXS103 triggering duplicate TLB
exceptions with super pages

Fixes: 12ebc1581ad11454 ("mm,thp: introduce flush_pmd_tlb_range")
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/pgtable-generic.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -210,7 +210,9 @@ pmd_t pmdp_collapse_flush(struct vm_area
 	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
 	VM_BUG_ON(pmd_trans_huge(*pmdp));
 	pmd = pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
-	flush_pmd_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+
+	/* collapse entails shooting down ptes not pmd */
+	flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 	return pmd;
 }
 #endif

[PATCH 4.4 119/137] intel_scu_ipcutil: underflow in scu_reg_access()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit b1d353ad3d5835b16724653b33c05124e1b5acf1 upstream.

"count" is controlled by the user and it can be negative.  Let's prevent
that by making it unsigned.  You have to have CAP_SYS_RAWIO to call this
function so the bug is not as serious as it could be.

Fixes: 5369c02d951a ('intel_scu_ipc: Utility driver for intel scu ipc')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/intel_scu_ipcutil.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/x86/intel_scu_ipcutil.c
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -49,7 +49,7 @@ struct scu_ipc_data {
 
 static int scu_reg_access(u32 cmd, struct scu_ipc_data  *data)
 {
-	int count = data->count;
+	unsigned int count = data->count;
 
 	if (count == 0 || count == 3 || count > 4)
 		return -EINVAL;

[PATCH 4.4 120/137] ipc/shm: handle removed segments gracefully in shm_mmap()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit 1ac0b6dec656f3f78d1c3dd216fad84cb4d0a01e upstream.

remap_file_pages(2) emulation can reach file which represents removed
IPC ID as long as a memory segment is mapped.  It breaks expectations of
IPC subsystem.

Test case (rewritten to be more human readable, originally autogenerated
by syzkaller[1]):

	#define _GNU_SOURCE
	#include <stdlib.h>
	#include <sys/ipc.h>
	#include <sys/mman.h>
	#include <sys/shm.h>

	#define PAGE_SIZE 4096

	int main()
	{
		int id;
		void *p;

		id = shmget(IPC_PRIVATE, 3 * PAGE_SIZE, 0);
		p = shmat(id, NULL, 0);
		shmctl(id, IPC_RMID, NULL);
		remap_file_pages(p, 3 * PAGE_SIZE, 0, 7, 0);

	        return 0;
	}

The patch changes shm_mmap() and code around shm_lock() to propagate
locking error back to caller of shm_mmap().

[1] http://github.com/google/syzkaller

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 ipc/shm.c |   53 +++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 10 deletions(-)

--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -156,11 +156,12 @@ static inline struct shmid_kernel *shm_l
 	struct kern_ipc_perm *ipcp = ipc_lock(&shm_ids(ns), id);
 
 	/*
-	 * We raced in the idr lookup or with shm_destroy().  Either way, the
-	 * ID is busted.
+	 * Callers of shm_lock() must validate the status of the returned ipc
+	 * object pointer (as returned by ipc_lock()), and error out as
+	 * appropriate.
 	 */
-	WARN_ON(IS_ERR(ipcp));
-
+	if (IS_ERR(ipcp))
+		return (void *)ipcp;
 	return container_of(ipcp, struct shmid_kernel, shm_perm);
 }
 
@@ -186,18 +187,33 @@ static inline void shm_rmid(struct ipc_n
 }
 
 
-/* This is called by fork, once for every shm attach. */
-static void shm_open(struct vm_area_struct *vma)
+static int __shm_open(struct vm_area_struct *vma)
 {
 	struct file *file = vma->vm_file;
 	struct shm_file_data *sfd = shm_file_data(file);
 	struct shmid_kernel *shp;
 
 	shp = shm_lock(sfd->ns, sfd->id);
+
+	if (IS_ERR(shp))
+		return PTR_ERR(shp);
+
 	shp->shm_atim = get_seconds();
 	shp->shm_lprid = task_tgid_vnr(current);
 	shp->shm_nattch++;
 	shm_unlock(shp);
+	return 0;
+}
+
+/* This is called by fork, once for every shm attach. */
+static void shm_open(struct vm_area_struct *vma)
+{
+	int err = __shm_open(vma);
+	/*
+	 * We raced in the idr lookup or with shm_destroy().
+	 * Either way, the ID is busted.
+	 */
+	WARN_ON_ONCE(err);
 }
 
 /*
@@ -260,6 +276,14 @@ static void shm_close(struct vm_area_str
 	down_write(&shm_ids(ns).rwsem);
 	/* remove from the list of attaches of the shm segment */
 	shp = shm_lock(ns, sfd->id);
+
+	/*
+	 * We raced in the idr lookup or with shm_destroy().
+	 * Either way, the ID is busted.
+	 */
+	if (WARN_ON_ONCE(IS_ERR(shp)))
+		goto done; /* no-op */
+
 	shp->shm_lprid = task_tgid_vnr(current);
 	shp->shm_dtim = get_seconds();
 	shp->shm_nattch--;
@@ -267,6 +291,7 @@ static void shm_close(struct vm_area_str
 		shm_destroy(ns, shp);
 	else
 		shm_unlock(shp);
+done:
 	up_write(&shm_ids(ns).rwsem);
 }
 
@@ -388,17 +413,25 @@ static int shm_mmap(struct file *file, s
 	struct shm_file_data *sfd = shm_file_data(file);
 	int ret;
 
+	/*
+	 * In case of remap_file_pages() emulation, the file can represent
+	 * removed IPC ID: propogate shm_lock() error to caller.
+	 */
+	ret =__shm_open(vma);
+	if (ret)
+		return ret;
+
 	ret = sfd->file->f_op->mmap(sfd->file, vma);
-	if (ret != 0)
+	if (ret) {
+		shm_close(vma);
 		return ret;
+	}
 	sfd->vm_ops = vma->vm_ops;
 #ifdef CONFIG_MMU
 	WARN_ON(!sfd->vm_ops->fault);
 #endif
 	vma->vm_ops = &shm_vm_ops;
-	shm_open(vma);
-
-	return ret;
+	return 0;
 }
 
 static int shm_release(struct inode *ino, struct file *file)

[PATCH 4.4 121/137] devm_memremap_release(): fix memremapd addr handling

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 9273a8bbf58a15051e53a777389a502420ddc60e upstream.

The pmem driver calls devm_memremap() to map a persistent memory range.
When the pmem driver is unloaded, this memremap'd range is not released
so the kernel will leak a vma.

Fix devm_memremap_release() to handle a given memremap'd address
properly.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/memremap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/memremap.c
+++ b/kernel/memremap.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(memunmap);
 
 static void devm_memremap_release(struct device *dev, void *res)
 {
-	memunmap(res);
+	memunmap(*(void **)res);
 }
 
 static int devm_memremap_match(struct device *dev, void *res, void *match_data)

[PATCH 4.4 122/137] futex: Drop refcount if requeue_pi() acquired the rtmutex

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit fb75a4282d0d9a3c7c44d940582c2d226cf3acfb upstream.

If the proxy lock in the requeue loop acquires the rtmutex for a
waiter then it acquired also refcount on the pi_state related to the
futex, but the waiter side does not drop the reference count.

Add the missing free_pi_state() call.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Bhuvanesh_Surachari@mentor.com
Cc: Andy Lowe <Andy_Lowe@mentor.com>
Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/futex.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2755,6 +2755,11 @@ static int futex_wait_requeue_pi(u32 __u
 		if (q.pi_state && (q.pi_state->owner != current)) {
 			spin_lock(q.lock_ptr);
 			ret = fixup_pi_state_owner(uaddr2, &q, current);
+			/*
+			 * Drop the reference to the pi state which
+			 * the requeue_pi() code acquired for us.
+			 */
+			free_pi_state(q.pi_state);
 			spin_unlock(q.lock_ptr);
 		}
 	} else {

[PATCH 4.4 123/137] ovl: allow zero size xattr

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <miklos@szeredi.hu>

commit 97daf8b97ad6f913a34c82515be64dc9ac08d63e upstream.

When ovl_copy_xattr() encountered a zero size xattr no more xattrs were
copied and the function returned success.  This is clearly not the desired
behavior.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/copy_up.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -54,7 +54,7 @@ int ovl_copy_xattr(struct dentry *old, s
 
 	for (name = buf; name < (buf + list_size); name += strlen(name) + 1) {
 		size = vfs_getxattr(old, name, value, XATTR_SIZE_MAX);
-		if (size <= 0) {
+		if (size < 0) {
 			error = size;
 			goto out_free_value;
 		}

[PATCH 4.4 124/137] ovl: use a minimal buffer in ovl_copy_xattr

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vito Caputo <vito.caputo@coreos.com>

commit e4ad29fa0d224d05e08b2858e65f112fd8edd4fe upstream.

Rather than always allocating the high-order XATTR_SIZE_MAX buffer
which is costly and prone to failure, only allocate what is needed and
realloc if necessary.

Fixes https://github.com/coreos/bugs/issues/489

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/copy_up.c |   39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -22,9 +22,9 @@
 
 int ovl_copy_xattr(struct dentry *old, struct dentry *new)
 {
-	ssize_t list_size, size;
-	char *buf, *name, *value;
-	int error;
+	ssize_t list_size, size, value_size = 0;
+	char *buf, *name, *value = NULL;
+	int uninitialized_var(error);
 
 	if (!old->d_inode->i_op->getxattr ||
 	    !new->d_inode->i_op->getxattr)
@@ -41,29 +41,40 @@ int ovl_copy_xattr(struct dentry *old, s
 	if (!buf)
 		return -ENOMEM;
 
-	error = -ENOMEM;
-	value = kmalloc(XATTR_SIZE_MAX, GFP_KERNEL);
-	if (!value)
-		goto out;
-
 	list_size = vfs_listxattr(old, buf, list_size);
 	if (list_size <= 0) {
 		error = list_size;
-		goto out_free_value;
+		goto out;
 	}
 
 	for (name = buf; name < (buf + list_size); name += strlen(name) + 1) {
-		size = vfs_getxattr(old, name, value, XATTR_SIZE_MAX);
+retry:
+		size = vfs_getxattr(old, name, value, value_size);
+		if (size == -ERANGE)
+			size = vfs_getxattr(old, name, NULL, 0);
+
 		if (size < 0) {
 			error = size;
-			goto out_free_value;
+			break;
 		}
+
+		if (size > value_size) {
+			void *new;
+
+			new = krealloc(value, size, GFP_KERNEL);
+			if (!new) {
+				error = -ENOMEM;
+				break;
+			}
+			value = new;
+			value_size = size;
+			goto retry;
+		}
+
 		error = vfs_setxattr(new, name, value, size, 0);
 		if (error)
-			goto out_free_value;
+			break;
 	}
-
-out_free_value:
 	kfree(value);
 out:
 	kfree(buf);

[PATCH 4.4 125/137] ovl: check dentry positiveness in ovl_cleanup_whiteouts()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

commit 84889d49335627bc770b32787c1ef9ebad1da232 upstream.

This patch fixes kernel crash at removing directory which contains
whiteouts from lower layers.

Cache of directory content passed as "list" contains entries from all
layers, including whiteouts from lower layers. So, lookup in upper dir
(moved into work at this stage) will return negative entry. Plus this
cache is filled long before and we can race with external removal.

Example:
 mkdir -p lower0/dir lower1/dir upper work overlay
 touch lower0/dir/a lower0/dir/b
 mknod lower1/dir/a c 0 0
 mount -t overlay none overlay -o lowerdir=lower1:lower0,upperdir=upper,workdir=work
 rm -fr overlay/dir

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/readdir.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -571,7 +571,8 @@ void ovl_cleanup_whiteouts(struct dentry
 			       (int) PTR_ERR(dentry));
 			continue;
 		}
-		ovl_cleanup(upper->d_inode, dentry);
+		if (dentry->d_inode)
+			ovl_cleanup(upper->d_inode, dentry);
 		dput(dentry);
 	}
 	mutex_unlock(&upper->d_inode->i_mutex);

[PATCH 4.4 126/137] ovl: root: copy attr

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <miklos@szeredi.hu>

commit ed06e069775ad9236087594a1c1667367e983fb5 upstream.

We copy i_uid and i_gid of underlying inode into overlayfs inode.  Except
for the root inode.

Fix this omission.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/super.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -1053,6 +1053,9 @@ static int ovl_fill_super(struct super_b
 
 	root_dentry->d_fsdata = oe;
 
+	ovl_copyattr(ovl_dentry_real(root_dentry)->d_inode,
+		     root_dentry->d_inode);
+
 	sb->s_magic = OVERLAYFS_SUPER_MAGIC;
 	sb->s_op = &ovl_super_operations;
 	sb->s_root = root_dentry;

[PATCH 4.4 127/137] ovl: setattr: check permissions before copy-up

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <miklos@szeredi.hu>

commit cf9a6784f7c1b5ee2b9159a1246e327c331c5697 upstream.

Without this copy-up of a file can be forced, even without actually being
allowed to do anything on the file.

[Arnd Bergmann] include <linux/pagemap.h> for PAGE_CACHE_SIZE (used by
MAX_LFS_FILESIZE definition).

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/inode.c |   13 +++++++++++++
 fs/overlayfs/super.c |    2 ++
 2 files changed, 15 insertions(+)

--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -42,6 +42,19 @@ int ovl_setattr(struct dentry *dentry, s
 	int err;
 	struct dentry *upperdentry;
 
+	/*
+	 * Check for permissions before trying to copy-up.  This is redundant
+	 * since it will be rechecked later by ->setattr() on upper dentry.  But
+	 * without this, copy-up can be triggered by just about anybody.
+	 *
+	 * We don't initialize inode->size, which just means that
+	 * inode_newsize_ok() will always check against MAX_LFS_FILESIZE and not
+	 * check for a swapfile (which this won't be anyway).
+	 */
+	err = inode_change_ok(dentry->d_inode, attr);
+	if (err)
+		return err;
+
 	err = ovl_want_write(dentry);
 	if (err)
 		goto out;
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -9,6 +9,7 @@
 
 #include <linux/fs.h>
 #include <linux/namei.h>
+#include <linux/pagemap.h>
 #include <linux/xattr.h>
 #include <linux/security.h>
 #include <linux/mount.h>
@@ -910,6 +911,7 @@ static int ovl_fill_super(struct super_b
 	}
 
 	sb->s_stack_depth = 0;
+	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	if (ufs->config.upperdir) {
 		if (!ufs->config.workdir) {
 			pr_err("overlayfs: missing 'workdir'\n");

[PATCH 4.4 128/137] libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <darrick.wong@oracle.com>

commit 96f859d52bcb1c6ea6f3388d39862bf7143e2f30 upstream.

Because struct xfs_agfl is 36 bytes long and has a 64-bit integer
inside it, gcc will quietly round the structure size up to the nearest
64 bits -- in this case, 40 bytes.  This results in the XFS_AGFL_SIZE
macro returning incorrect results for v5 filesystems on 64-bit
machines (118 items instead of 119).  As a result, a 32-bit xfs_repair
will see garbage in AGFL item 119 and complain.

Therefore, tell gcc not to pad the structure so that the AGFL size
calculation is correct.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/libxfs/xfs_format.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/libxfs/xfs_format.h
+++ b/fs/xfs/libxfs/xfs_format.h
@@ -786,7 +786,7 @@ typedef struct xfs_agfl {
 	__be64		agfl_lsn;
 	__be32		agfl_crc;
 	__be32		agfl_bno[];	/* actually XFS_AGFL_SIZE(mp) */
-} xfs_agfl_t;
+} __attribute__((packed)) xfs_agfl_t;
 
 #define XFS_AGFL_CRC_OFF	offsetof(struct xfs_agfl, agfl_crc)
 

[PATCH 4.4 129/137] xfs: inode recovery readahead can race with inode buffer creation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <dchinner@redhat.com>

commit b79f4a1c68bb99152d0785ee4ea3ab4396cdacc6 upstream.

When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.

In adding buffer error notification  (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:

XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32

This occurs when readahead completion races with icreate item replay
such as:

	inode readahead
		find buffer
		lock buffer
		submit RA io
	....
	icreate recovery
	    xfs_trans_get_buffer
		find buffer
		lock buffer
		<blocks on RA completion>
	.....
	<ra completion>
		fails verifier
		clear XBF_DONE
		set bp->b_error = -EIO
		release and unlock buffer
	<icreate gains lock>
	icreate initialises buffer
	marks buffer as done
	adds buffer to delayed write queue
	releases buffer

At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:

	inode item recovery
	    xfs_trans_read_buffer
		find buffer
		lock buffer
		sees XBF_DONE is set, returns buffer
	    sees bp->b_error is set
		fail log recovery!

Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....

This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/libxfs/xfs_inode_buf.c |   12 +++++++-----
 fs/xfs/xfs_buf.c              |    7 +++++++
 2 files changed, 14 insertions(+), 5 deletions(-)

--- a/fs/xfs/libxfs/xfs_inode_buf.c
+++ b/fs/xfs/libxfs/xfs_inode_buf.c
@@ -62,11 +62,12 @@ xfs_inobp_check(
  * has not had the inode cores stamped into it. Hence for readahead, the buffer
  * may be potentially invalid.
  *
- * If the readahead buffer is invalid, we don't want to mark it with an error,
- * but we do want to clear the DONE status of the buffer so that a followup read
- * will re-read it from disk. This will ensure that we don't get an unnecessary
- * warnings during log recovery and we don't get unnecssary panics on debug
- * kernels.
+ * If the readahead buffer is invalid, we need to mark it with an error and
+ * clear the DONE status of the buffer so that a followup read will re-read it
+ * from disk. We don't report the error otherwise to avoid warnings during log
+ * recovery and we don't get unnecssary panics on debug kernels. We use EIO here
+ * because all we want to do is say readahead failed; there is no-one to report
+ * the error to, so this will distinguish it from a non-ra verifier failure.
  */
 static void
 xfs_inode_buf_verify(
@@ -93,6 +94,7 @@ xfs_inode_buf_verify(
 						XFS_RANDOM_ITOBP_INOTOBP))) {
 			if (readahead) {
 				bp->b_flags &= ~XBF_DONE;
+				xfs_buf_ioerror(bp, -EIO);
 				return;
 			}
 
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -604,6 +604,13 @@ found:
 		}
 	}
 
+	/*
+	 * Clear b_error if this is a lookup from a caller that doesn't expect
+	 * valid data to be found in the buffer.
+	 */
+	if (!(flags & XBF_READ))
+		xfs_buf_ioerror(bp, 0);
+
 	XFS_STATS_INC(target->bt_mount, xb_get);
 	trace_xfs_buf_get(bp, flags, _RET_IP_);
 	return bp;

[PATCH 4.4 130/137] Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <david@fromorbit.com>

commit 3e85286e75224fa3f08bdad20e78c8327742634e upstream.

This reverts commit 24ba16bb3d499c49974669cd8429c3e4138ab102 as it
prevents machines from suspending. This regression occurs when the
xfsaild is idle on entry to suspend, and so there s no activity to
wake it from it's idle sleep and hence see that it is supposed to
freeze. Hence the freezer times out waiting for it and suspend is
cancelled.

There is no obvious fix for this short of freezing the filesystem
properly, so revert this change for now.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_trans_ail.c |    1 -
 1 file changed, 1 deletion(-)

--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -497,7 +497,6 @@ xfsaild(
 	long		tout = 0;	/* milliseconds */
 
 	current->flags |= PF_MEMALLOC;
-	set_freezable();
 
 	while (!kthread_should_stop()) {
 		if (tout && tout <= 20)

[PATCH 4.4 131/137] xfs: log mount failures dont wait for buffers to be released

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <dchinner@redhat.com>

commit 85bec5460ad8e05e0a8d70fb0f6750eb719ad092 upstream.

Recently I've been seeing xfs/051 fail on 1k block size filesystems.
Trying to trace the events during the test lead to the problem going
away, indicating that it was a race condition that lead to this
ASSERT failure:

XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 156
.....
[<ffffffff814e1257>] xfs_free_perag+0x87/0xb0
[<ffffffff814e21b9>] xfs_mountfs+0x4d9/0x900
[<ffffffff814e5dff>] xfs_fs_fill_super+0x3bf/0x4d0
[<ffffffff811d8800>] mount_bdev+0x180/0x1b0
[<ffffffff814e3ff5>] xfs_fs_mount+0x15/0x20
[<ffffffff811d90a8>] mount_fs+0x38/0x170
[<ffffffff811f4347>] vfs_kern_mount+0x67/0x120
[<ffffffff811f7018>] do_mount+0x218/0xd60
[<ffffffff811f7e5b>] SyS_mount+0x8b/0xd0

When I finally caught it with tracing enabled, I saw that AG 2 had
an elevated reference count and a buffer was responsible for it. I
tracked down the specific buffer, and found that it was missing the
final reference count release that would put it back on the LRU and
hence be found by xfs_wait_buftarg() calls in the log mount failure
handling.

The last four traces for the buffer before the assert were (trimmed
for relevance)

kworker/0:1-5259   xfs_buf_iodone:        hold 2  lock 0 flags ASYNC
kworker/0:1-5259   xfs_buf_ioerror:       hold 2  lock 0 error -5
mount-7163	   xfs_buf_lock_done:     hold 2  lock 0 flags ASYNC
mount-7163	   xfs_buf_unlock:        hold 2  lock 1 flags ASYNC

This is an async write that is completing, so there's nobody waiting
for it directly.  Hence we call xfs_buf_relse() once all the
processing is complete. That does:

static inline void xfs_buf_relse(xfs_buf_t *bp)
{
	xfs_buf_unlock(bp);
	xfs_buf_rele(bp);
}

Now, it's clear that mount is waiting on the buffer lock, and that
it has been released by xfs_buf_relse() and gained by mount. This is
expected, because at this point the mount process is in
xfs_buf_delwri_submit() waiting for all the IO it submitted to
complete.

The mount process, however, is waiting on the lock for the buffer
because it is in xfs_buf_delwri_submit(). This waits for IO
completion, but it doesn't wait for the buffer reference owned by
the IO to go away. The mount process collects all the completions,
fails the log recovery, and the higher level code then calls
xfs_wait_buftarg() to free all the remaining buffers in the
filesystem.

The issue is that on unlocking the buffer, the scheduler has decided
that the mount process has higher priority than the the kworker
thread that is running the IO completion, and so immediately
switched contexts to the mount process from the semaphore unlock
code, hence preventing the kworker thread from finishing the IO
completion and releasing the IO reference to the buffer.

Hence by the time that xfs_wait_buftarg() is run, the buffer still
has an active reference and so isn't on the LRU list that the
function walks to free the remaining buffers. Hence we miss that
buffer and continue onwards to tear down the mount structures,
at which time we get find a stray reference count on the perag
structure. On a non-debug kernel, this will be ignored and the
structure torn down and freed. Hence when the kworker thread is then
rescheduled and the buffer released and freed, it will access a
freed perag structure.

The problem here is that when the log mount fails, we still need to
quiesce the log to ensure that the IO workqueues have returned to
idle before we run xfs_wait_buftarg(). By synchronising the
workqueues, we ensure that all IO completions are fully processed,
not just to the point where buffers have been unlocked. This ensures
we don't end up in the situation above.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_buf.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1527,6 +1527,16 @@ xfs_wait_buftarg(
 	LIST_HEAD(dispose);
 	int loop = 0;
 
+	/*
+	 * We need to flush the buffer workqueue to ensure that all IO
+	 * completion processing is 100% done. Just waiting on buffer locks is
+	 * not sufficient for async IO as the reference count held over IO is
+	 * not released until after the buffer lock is dropped. Hence we need to
+	 * ensure here that all reference counts have been dropped before we
+	 * start walking the LRU list.
+	 */
+	drain_workqueue(btp->bt_mount->m_buf_workqueue);
+
 	/* loop until there is nothing left on the lru list. */
 	while (list_lru_count(&btp->bt_lru)) {
 		list_lru_walk(&btp->bt_lru, xfs_buftarg_wait_rele,

[PATCH 4.4 132/137] prctl: take mmap sem for writing to protect against others

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mateusz Guzik <mguzik@redhat.com>

commit ddf1d398e517e660207e2c807f76a90df543a217 upstream.

An unprivileged user can trigger an oops on a kernel with
CONFIG_CHECKPOINT_RESTORE.

proc_pid_cmdline_read takes mmap_sem for reading and obtains args + env
start/end values. These get sanity checked as follows:
        BUG_ON(arg_start > arg_end);
        BUG_ON(env_start > env_end);

These can be changed by prctl_set_mm. Turns out also takes the semaphore for
reading, effectively rendering it useless. This results in:

  kernel BUG at fs/proc/base.c:240!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: virtio_net
  CPU: 0 PID: 925 Comm: a.out Not tainted 4.4.0-rc8-next-20160105dupa+ #71
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff880077a68000 ti: ffff8800784d0000 task.ti: ffff8800784d0000
  RIP: proc_pid_cmdline_read+0x520/0x530
  RSP: 0018:ffff8800784d3db8  EFLAGS: 00010206
  RAX: ffff880077c5b6b0 RBX: ffff8800784d3f18 RCX: 0000000000000000
  RDX: 0000000000000002 RSI: 00007f78e8857000 RDI: 0000000000000246
  RBP: ffff8800784d3e40 R08: 0000000000000008 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000050
  R13: 00007f78e8857800 R14: ffff88006fcef000 R15: ffff880077c5b600
  FS:  00007f78e884a740(0000) GS:ffff88007b200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007f78e8361770 CR3: 00000000790a5000 CR4: 00000000000006f0
  Call Trace:
    __vfs_read+0x37/0x100
    vfs_read+0x82/0x130
    SyS_read+0x58/0xd0
    entry_SYSCALL_64_fastpath+0x12/0x76
  Code: 4c 8b 7d a8 eb e9 48 8b 9d 78 ff ff ff 4c 8b 7d 90 48 8b 03 48 39 45 a8 0f 87 f0 fe ff ff e9 d1 fe ff ff 4c 8b 7d 90 eb c6 0f 0b <0f> 0b 0f 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
  RIP   proc_pid_cmdline_read+0x520/0x530
  ---[ end trace 97882617ae9c6818 ]---

Turns out there are instances where the code just reads aformentioned
values without locking whatsoever - namely environ_read and get_cmdline.

Interestingly these functions look quite resilient against bogus values,
but I don't believe this should be relied upon.

The first patch gets rid of the oops bug by grabbing mmap_sem for
writing.

The second patch is optional and puts locking around aformentioned
consumers for safety.  Consumers of other fields don't seem to benefit
from similar treatment and are left untouched.

This patch (of 2):

The code was taking the semaphore for reading, which does not protect
against readers nor concurrent modifications.

The problem could cause a sanity checks to fail in procfs's cmdline
reader, resulting in an OOPS.

Note that some functions perform an unlocked read of various mm fields,
but they seem to be fine despite possible modificaton.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anshuman Khandual <anshuman.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sys.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1853,11 +1853,13 @@ static int prctl_set_mm_map(int opt, con
 		user_auxv[AT_VECTOR_SIZE - 1] = AT_NULL;
 	}
 
-	if (prctl_map.exe_fd != (u32)-1)
+	if (prctl_map.exe_fd != (u32)-1) {
 		error = prctl_set_mm_exe_file(mm, prctl_map.exe_fd);
-	down_read(&mm->mmap_sem);
-	if (error)
-		goto out;
+		if (error)
+			return error;
+	}
+
+	down_write(&mm->mmap_sem);
 
 	/*
 	 * We don't validate if these members are pointing to
@@ -1894,10 +1896,8 @@ static int prctl_set_mm_map(int opt, con
 	if (prctl_map.auxv_size)
 		memcpy(mm->saved_auxv, user_auxv, sizeof(user_auxv));
 
-	error = 0;
-out:
-	up_read(&mm->mmap_sem);
-	return error;
+	up_write(&mm->mmap_sem);
+	return 0;
 }
 #endif /* CONFIG_CHECKPOINT_RESTORE */
 
@@ -1963,7 +1963,7 @@ static int prctl_set_mm(int opt, unsigne
 
 	error = -EINVAL;
 
-	down_read(&mm->mmap_sem);
+	down_write(&mm->mmap_sem);
 	vma = find_vma(mm, addr);
 
 	prctl_map.start_code	= mm->start_code;
@@ -2056,7 +2056,7 @@ static int prctl_set_mm(int opt, unsigne
 
 	error = 0;
 out:
-	up_read(&mm->mmap_sem);
+	up_write(&mm->mmap_sem);
 	return error;
 }
 

[PATCH 4.4 133/137] timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit b62526ed11a1fe3861ab98d40b7fdab8981d788a upstream.

Helge reported that a relative timer can return a remaining time larger than
the programmed relative time on parisc and other architectures which have
CONFIG_TIME_LOW_RES set. This happens because we add a jiffie to the resulting
expiry time to prevent short timeouts.

Use the new function hrtimer_expires_remaining_adjusted() to calculate the
remaining time. It takes that extra added time into account for relative
timers.

Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.354500742@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/timerfd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -153,7 +153,7 @@ static ktime_t timerfd_get_remaining(str
 	if (isalarm(ctx))
 		remaining = alarm_expires_remaining(&ctx->t.alarm);
 	else
-		remaining = hrtimer_expires_remaining(&ctx->t.tmr);
+		remaining = hrtimer_expires_remaining_adjusted(&ctx->t.tmr);
 
 	return remaining.tv64 < 0 ? ktime_set(0, 0): remaining;
 }

[PATCH 4.4 134/137] posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 572c39172684c3711e4a03c9a7380067e2b0661c upstream.

As Helge reported for timerfd we have the same issue in posix timers. We
return remaining time larger than the programmed relative time to user space
in case of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra
time added in hrtimer_start_range_ns().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.450510905@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/posix-timers.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -760,7 +760,7 @@ common_timer_get(struct k_itimer *timr,
 	    (timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
 		timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
 
-	remaining = ktime_sub(hrtimer_get_expires(timer), now);
+	remaining = __hrtimer_expires_remaining_adjusted(timer, now);
 	/* Return 0 only, when the timer is expired and not pending */
 	if (remaining.tv64 <= 0) {
 		/*

[PATCH 4.4 135/137] itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 51cbb5242a41700a3f250ecfb48dcfb7e4375ea4 upstream.

As Helge reported for timerfd we have the same issue in itimers. We return
remaining time larger than the programmed relative time to user space in case
of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra time
added in hrtimer_start_range_ns().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.528222587@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/itimer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/time/itimer.c
+++ b/kernel/time/itimer.c
@@ -26,7 +26,7 @@
  */
 static struct timeval itimer_get_remtime(struct hrtimer *timer)
 {
-	ktime_t rem = hrtimer_get_remaining(timer);
+	ktime_t rem = __hrtimer_get_remaining(timer, true);
 
 	/*
 	 * Racy but safe: if the itimer expires after the above

[PATCH 4.4 136/137] module: wrapper for symbol name.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rusty Russell <rusty@rustcorp.com.au>

commit 2e7bac536106236104e9e339531ff0fcdb7b8147 upstream.

This trivial wrapper adds clarity and makes the following patch
smaller.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/module.c |   26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3646,6 +3646,11 @@ static inline int is_arm_mapping_symbol(
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
+static const char *symname(struct module *mod, unsigned int symnum)
+{
+	return mod->strtab + mod->symtab[symnum].st_name;
+}
+
 static const char *get_ksymbol(struct module *mod,
 			       unsigned long addr,
 			       unsigned long *size,
@@ -3668,15 +3673,15 @@ static const char *get_ksymbol(struct mo
 
 		/* We ignore unnamed symbols: they're uninformative
 		 * and inserted at a whim. */
+		if (*symname(mod, i) == '\0'
+		    || is_arm_mapping_symbol(symname(mod, i)))
+			continue;
+
 		if (mod->symtab[i].st_value <= addr
-		    && mod->symtab[i].st_value > mod->symtab[best].st_value
-		    && *(mod->strtab + mod->symtab[i].st_name) != '\0'
-		    && !is_arm_mapping_symbol(mod->strtab + mod->symtab[i].st_name))
+		    && mod->symtab[i].st_value > mod->symtab[best].st_value)
 			best = i;
 		if (mod->symtab[i].st_value > addr
-		    && mod->symtab[i].st_value < nextval
-		    && *(mod->strtab + mod->symtab[i].st_name) != '\0'
-		    && !is_arm_mapping_symbol(mod->strtab + mod->symtab[i].st_name))
+		    && mod->symtab[i].st_value < nextval)
 			nextval = mod->symtab[i].st_value;
 	}
 
@@ -3687,7 +3692,7 @@ static const char *get_ksymbol(struct mo
 		*size = nextval - mod->symtab[best].st_value;
 	if (offset)
 		*offset = addr - mod->symtab[best].st_value;
-	return mod->strtab + mod->symtab[best].st_name;
+	return symname(mod, best);
 }
 
 /* For kallsyms to ask for address resolution.  NULL means not found.  Careful
@@ -3782,8 +3787,7 @@ int module_get_kallsym(unsigned int symn
 		if (symnum < mod->num_symtab) {
 			*value = mod->symtab[symnum].st_value;
 			*type = mod->symtab[symnum].st_info;
-			strlcpy(name, mod->strtab + mod->symtab[symnum].st_name,
-				KSYM_NAME_LEN);
+			strlcpy(name, symname(mod, symnum), KSYM_NAME_LEN);
 			strlcpy(module_name, mod->name, MODULE_NAME_LEN);
 			*exported = is_exported(name, *value, mod);
 			preempt_enable();
@@ -3800,7 +3804,7 @@ static unsigned long mod_find_symname(st
 	unsigned int i;
 
 	for (i = 0; i < mod->num_symtab; i++)
-		if (strcmp(name, mod->strtab+mod->symtab[i].st_name) == 0 &&
+		if (strcmp(name, symname(mod, i)) == 0 &&
 		    mod->symtab[i].st_info != 'U')
 			return mod->symtab[i].st_value;
 	return 0;
@@ -3844,7 +3848,7 @@ int module_kallsyms_on_each_symbol(int (
 		if (mod->state == MODULE_STATE_UNFORMED)
 			continue;
 		for (i = 0; i < mod->num_symtab; i++) {
-			ret = fn(data, mod->strtab + mod->symtab[i].st_name,
+			ret = fn(data, symname(mod, i),
 				 mod, mod->symtab[i].st_value);
 			if (ret != 0)
 				return ret;

[PATCH 4.4 137/137] modules: fix modparam async_probe request

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luis R. Rodriguez <mcgrof@suse.com>

commit 4355efbd80482a961cae849281a8ef866e53d55c upstream.

Commit f2411da746985 ("driver-core: add driver module
asynchronous probe support") added async probe support,
in two forms:

  * in-kernel driver specification annotation
  * generic async_probe module parameter (modprobe foo async_probe)

To support the generic kernel parameter parse_args() was
extended via commit ecc8617053e0 ("module: add extra
argument for parse_params() callback") however commit
failed to f2411da746985 failed to add the required argument.

This causes a crash then whenever async_probe generic
module parameter is used. This was overlooked when the
form in which in-kernel async probe support was reworked
a bit... Fix this as originally intended.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> [minimized]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/module.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3515,7 +3515,7 @@ static int load_module(struct load_info
 
 	/* Module is ready to execute: parsing args may do that. */
 	after_dashes = parse_args(mod->name, mod->args, mod->kp, mod->num_kp,
-				  -32768, 32767, NULL,
+				  -32768, 32767, mod,
 				  unknown_module_param_cb);
 	if (IS_ERR(after_dashes)) {
 		err = PTR_ERR(after_dashes);

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Mike Galbraith]

On Tue, 2016-02-23 at 19:32 -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.3 release.
> There are 137 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> Anything received after that time might be too late.

041bd12e Revert "workqueue: make sure delayed work run in local cpu"?

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Greg Kroah-Hartman]

On Wed, Feb 24, 2016 at 05:49:45AM +0100, Mike Galbraith wrote:
> On Tue, 2016-02-23 at 19:32 -0800, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.3 release.
> > There are 137 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> > Anything received after that time might be too late.
> 
> 041bd12e Revert "workqueue: make sure delayed work run in local cpu"?

It's in the list of patches I haven't gotten to yet, which is still over
200.  Is it worth adding to this release now or can it wait until the
next one later in the week?

thanks,

greg k-h

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Mike Galbraith]

On Tue, 2016-02-23 at 21:00 -0800, Greg Kroah-Hartman wrote:
> On Wed, Feb 24, 2016 at 05:49:45AM +0100, Mike Galbraith wrote:
> > On Tue, 2016-02-23 at 19:32 -0800, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.4.3 release.
> > > There are 137 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> > > Anything received after that time might be too late.
> > 
> > 041bd12e Revert "workqueue: make sure delayed work run in local cpu"?
> 
> It's in the list of patches I haven't gotten to yet, which is still over
> 200.  Is it worth adding to this release now or can it wait until the
> next one later in the week?

Sure, no rush.

	-Mike

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Shuah Khan]

On 02/23/2016 08:32 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.3 release.
> There are 137 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.3-rc1.gz
> and the diffstat can be found below.
> 

Compiled and booted on my test system.
No dmesg regressions.

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Guenter Roeck]

On 02/23/2016 07:32 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.3 release.
> There are 137 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> Anything received after that time might be too late.
>

Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 96 pass: 96 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Greg Kroah-Hartman]

On Wed, Feb 24, 2016 at 09:53:38PM -0800, Guenter Roeck wrote:
> On 02/23/2016 07:32 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 4.4.3 release.
> >There are 137 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> >Anything received after that time might be too late.
> >
> 
> Build results:
> 	total: 145 pass: 145 fail: 0
> Qemu test results:
> 	total: 96 pass: 96 fail: 0
> 
> Details are available at http://kerneltests.org/builders.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.4 000/137] 4.4.3-stable review

[Greg Kroah-Hartman]

On Wed, Feb 24, 2016 at 11:28:04AM -0700, Shuah Khan wrote:
> On 02/23/2016 08:32 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.3 release.
> > There are 137 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri Feb 26 03:33:58 UTC 2016.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.3-rc1.gz
> > and the diffstat can be found below.
> > 
> 
> Compiled and booted on my test system.
> No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h