[patch added to 3.12-stable] x86, asmlinkage, lguest: Pass in globals into assembler statement

[patch added to 3.12-stable] x86, asmlinkage, lguest: Pass in globals into assembler statement

[Jiri Slaby]

From: Andi Kleen <ak@linux.intel.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit cdd77e87eae52b7251acc5990207a1c4500a84ce upstream.

Tell the compiler that the inline assembler statement
references lguest_entry.

This fixes compile problems with LTO where the variable
and the assembler code may end up in different files.

Cc: x86@kernel.org
Cc: rusty@rustcorp.com.au
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/lguest/x86/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 516923926335..922a1acbf652 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -157,7 +157,7 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
 	 * stack, then the address of this call.  This stack layout happens to
 	 * exactly match the stack layout created by an interrupt...
 	 */
-	asm volatile("pushf; lcall *lguest_entry"
+	asm volatile("pushf; lcall *%4"
 		     /*
 		      * This is how we tell GCC that %eax ("a") and %ebx ("b")
 		      * are changed by this routine.  The "=" means output.
@@ -169,7 +169,9 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
 		      * physical address of the Guest's top-level page
 		      * directory.
 		      */
-		     : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
+		     : "0"(pages), 
+		       "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir)),
+		       "m"(lguest_entry)
 		     /*
 		      * We tell gcc that all these registers could change,
 		      * which means we don't have to save and restore them in
-- 
2.9.3

[patch added to 3.12-stable] can: at91_can: RX queue could get stuck at high bus load

[Jiri Slaby]

From: Wolfgang Grandegger <wg@grandegger.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 43200a4480cbbe660309621817f54cbb93907108 upstream.

At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Amr Bekhit <amrbekhit@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/can/at91_can.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 693d8ffe4653..67e08af13eb0 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -731,9 +731,10 @@ static int at91_poll_rx(struct net_device *dev, int quota)
 
 	/* upper group completed, look again in lower */
 	if (priv->rx_next > get_mb_rx_low_last(priv) &&
-	    quota > 0 && mb > get_mb_rx_last(priv)) {
+	    mb > get_mb_rx_last(priv)) {
 		priv->rx_next = get_mb_rx_first(priv);
-		goto again;
+		if (quota > 0)
+			goto again;
 	}
 
 	return received;
-- 
2.9.3

[patch added to 3.12-stable] can: fix handling of unmodifiable configuration options fix

[Jiri Slaby]

From: Oliver Hartkopp <socketcan@hartkopp.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit bce271f255dae8335dc4d2ee2c4531e09cc67f5a upstream.

With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable
configuration options) a new can_validate() function was introduced.

When invoking 'ip link set can0 type can' without any configuration data
can_validate() tries to validate the content without taking into account that
there's totally no content. This patch adds a check for missing content.

Reported-by: ajneu <ajneu1@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/can/dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f66aeb79abdf..3c1a7f8211be 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -644,6 +644,9 @@ static int can_changelink(struct net_device *dev,
 	/* We need synchronization with dev->stop() */
 	ASSERT_RTNL();
 
+	if (!data)
+		return 0;
+
 	if (data[IFLA_CAN_CTRLMODE]) {
 		struct can_ctrlmode *cm;
 
-- 
2.9.3

[patch added to 3.12-stable] can: fix oops caused by wrong rtnl dellink usage

[Jiri Slaby]

From: Oliver Hartkopp <socketcan@hartkopp.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 upstream.

For 'real' hardware CAN devices the netlink interface is used to set CAN
specific communication parameters. Real CAN hardware can not be created nor
removed with the ip tool ...

This patch adds a private dellink function for the CAN device driver interface
that does just nothing.

It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl
newlink usage") but for dellink.

Reported-by: ajneu <ajneu1@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/can/dev.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 3c1a7f8211be..561bed7eb6a5 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -775,6 +775,11 @@ static int can_newlink(struct net *src_net, struct net_device *dev,
 	return -EOPNOTSUPP;
 }
 
+static void can_dellink(struct net_device *dev, struct list_head *head)
+{
+	return;
+}
+
 static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.kind		= "can",
 	.maxtype	= IFLA_CAN_MAX,
@@ -782,6 +787,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.setup		= can_setup,
 	.newlink	= can_newlink,
 	.changelink	= can_changelink,
+	.dellink	= can_dellink,
 	.get_size	= can_get_size,
 	.fill_info	= can_fill_info,
 	.get_xstats_size = can_get_xstats_size,
-- 
2.9.3

[patch added to 3.12-stable] ipr: Clear interrupt on croc/crocodile when running with LSI

[Jiri Slaby]

From: Brian King <brking@linux.vnet.ibm.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 54e430bbd490e18ab116afa4cd90dcc45787b3df upstream.

If we fall back to using LSI on the Croc or Crocodile chip we need to
clear the interrupt so we don't hang the system.

Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/scsi/ipr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index d4473d2f8739..676c03e63cae 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9644,6 +9644,7 @@ static int ipr_probe_ioa(struct pci_dev *pdev,
 		ioa_cfg->intr_flag = IPR_USE_MSI;
 	else {
 		ioa_cfg->intr_flag = IPR_USE_LSI;
+		ioa_cfg->clear_isr = 1;
 		ioa_cfg->nvectors = 1;
 		dev_info(&pdev->dev, "Cannot enable MSI.\n");
 	}
-- 
2.9.3

[patch added to 3.12-stable] net: mvneta: set real interrupt per packet for tx_done

[Jiri Slaby]

From: Dmitri Epshtein <dima@marvell.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 06708f81528725148473c0869d6af5f809c6824b upstream.

Commit aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") intended to
set coalescing threshold to a value guaranteeing interrupt generation
per each sent packet, so that buffers can be released with no delay.

In fact setting threshold to '1' was wrong, because it causes interrupt
every two packets. According to the documentation a reason behind it is
following - interrupt occurs once sent buffers counter reaches a value,
which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This
behavior was confirmed during tests. Also when testing the SoC working
as a NAS device, better performance was observed with int-per-packet,
as it strongly depends on the fact that all transmitted packets are
released immediately.

This commit enables NETA controller work in interrupt per sent packet mode
by setting coalescing threshold to 0.

Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Fixes aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay")
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5902e6a93167..8c07b331ef58 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -212,7 +212,7 @@
 /* Various constants */
 
 /* Coalescing */
-#define MVNETA_TXDONE_COAL_PKTS		1
+#define MVNETA_TXDONE_COAL_PKTS		0	/* interrupt per packet */
 #define MVNETA_RX_COAL_PKTS		32
 #define MVNETA_RX_COAL_USEC		100
 
-- 
2.9.3

[patch added to 3.12-stable] random32: add prandom_u32_max and convert open coded users

[Jiri Slaby]

From: Daniel Borkmann <dborkman@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f337db64af059c9a94278a8b0ab97d87259ff62f upstream.

Many functions have open coded a function that returns a random
number in range [0,N-1]. Under the assumption that we have a PRNG
such as taus113 with being well distributed in [0, ~0U] space,
we can implement such a function as uword t = (n*m')>>32, where
m' is a random number obtained from PRNG, n the right open interval
border and t our resulting random number, with n,m',t in u32 universe.

Lets go with Joe and simply call it prandom_u32_max(), although
technically we have an right open interval endpoint, but that we
have documented. Other users can further be migrated to the new
prandom_u32_max() function later on; for now, we need to make sure
to migrate reciprocal_divide() users for the reciprocal_divide()
follow-up fixup since their function signatures are going to change.

Joint work with Hannes Frederic Sowa.

Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/team/team_mode_random.c |  8 +-------
 include/linux/random.h              | 18 +++++++++++++++++-
 net/packet/af_packet.c              |  2 +-
 net/sched/sch_choke.c               |  9 +--------
 4 files changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/net/team/team_mode_random.c b/drivers/net/team/team_mode_random.c
index 7f032e211343..cd2f692b8074 100644
--- a/drivers/net/team/team_mode_random.c
+++ b/drivers/net/team/team_mode_random.c
@@ -13,20 +13,14 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/skbuff.h>
-#include <linux/reciprocal_div.h>
 #include <linux/if_team.h>
 
-static u32 random_N(unsigned int N)
-{
-	return reciprocal_divide(prandom_u32(), N);
-}
-
 static bool rnd_transmit(struct team *team, struct sk_buff *skb)
 {
 	struct team_port *port;
 	int port_index;
 
-	port_index = random_N(team->en_port_count);
+	port_index = prandom_u32_max(team->en_port_count);
 	port = team_get_port_by_index_rcu(team, port_index);
 	if (unlikely(!port))
 		goto drop;
diff --git a/include/linux/random.h b/include/linux/random.h
index bf9085e89fb5..230040642bea 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -8,7 +8,6 @@
 
 #include <uapi/linux/random.h>
 
-
 extern void add_device_randomness(const void *, unsigned int);
 extern void add_input_randomness(unsigned int type, unsigned int code,
 				 unsigned int value);
@@ -33,6 +32,23 @@ void prandom_seed(u32 seed);
 u32 prandom_u32_state(struct rnd_state *);
 void prandom_bytes_state(struct rnd_state *state, void *buf, int nbytes);
 
+/**
+ * prandom_u32_max - returns a pseudo-random number in interval [0, ep_ro)
+ * @ep_ro: right open interval endpoint
+ *
+ * Returns a pseudo-random number that is in interval [0, ep_ro). Note
+ * that the result depends on PRNG being well distributed in [0, ~0U]
+ * u32 space. Here we use maximally equidistributed combined Tausworthe
+ * generator, that is, prandom_u32(). This is useful when requesting a
+ * random index of an array containing ep_ro elements, for example.
+ *
+ * Returns: pseudo-random number in interval [0, ep_ro)
+ */
+static inline u32 prandom_u32_max(u32 ep_ro)
+{
+	return (u32)(((u64) prandom_u32() * ep_ro) >> 32);
+}
+
 /*
  * Handle minimum values for seeds
  */
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 63d0f92f45d0..1e9cb9921daa 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1178,7 +1178,7 @@ static unsigned int fanout_demux_rnd(struct packet_fanout *f,
 				     struct sk_buff *skb,
 				     unsigned int num)
 {
-	return reciprocal_divide(prandom_u32(), num);
+	return prandom_u32_max(num);
 }
 
 static unsigned int fanout_demux_rollover(struct packet_fanout *f,
diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c
index ddd73cb2d7ba..2aee02802c27 100644
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
-#include <linux/reciprocal_div.h>
 #include <linux/vmalloc.h>
 #include <net/pkt_sched.h>
 #include <net/inet_ecn.h>
@@ -77,12 +76,6 @@ struct choke_sched_data {
 	struct sk_buff **tab;
 };
 
-/* deliver a random number between 0 and N - 1 */
-static u32 random_N(unsigned int N)
-{
-	return reciprocal_divide(prandom_u32(), N);
-}
-
 /* number of elements in queue including holes */
 static unsigned int choke_len(const struct choke_sched_data *q)
 {
@@ -233,7 +226,7 @@ static struct sk_buff *choke_peek_random(const struct choke_sched_data *q,
 	int retrys = 3;
 
 	do {
-		*pidx = (q->head + random_N(choke_len(q))) & q->tab_mask;
+		*pidx = (q->head + prandom_u32_max(choke_len(q))) & q->tab_mask;
 		skb = q->tab[*pidx];
 		if (skb)
 			return skb;
-- 
2.9.3

[patch added to 3.12-stable] tcp: make challenge acks less predictable

[Jiri Slaby]

From: Eric Dumazet <edumazet@google.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758 ]

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

This patch increases the default limit from 100 to 1000, and adds
some randomization so that the attacker can no longer hijack
sessions without spending a considerable amount of probes.

Based on initial analysis and patch from Linus.

Note that we also have per socket rate limiting, so it is tempting
to remove the host limit in the future.

v2: randomize the count of challenge acks per second, not the period.

js: backport to 3.12

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Reported-by: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/ipv4/tcp_input.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3062acf74165..9eef76176704 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -87,7 +87,7 @@ int sysctl_tcp_adv_win_scale __read_mostly = 1;
 EXPORT_SYMBOL(sysctl_tcp_adv_win_scale);
 
 /* rfc5961 challenge ack rate limiting */
-int sysctl_tcp_challenge_ack_limit = 100;
+int sysctl_tcp_challenge_ack_limit = 1000;
 
 int sysctl_tcp_stdurg __read_mostly;
 int sysctl_tcp_rfc1337 __read_mostly;
@@ -3242,13 +3242,18 @@ static void tcp_send_challenge_ack(struct sock *sk)
 	/* unprotected vars, we dont care of overwrites */
 	static u32 challenge_timestamp;
 	static unsigned int challenge_count;
-	u32 now = jiffies / HZ;
+	u32 count, now = jiffies / HZ;
 
 	if (now != challenge_timestamp) {
+		u32 half = (sysctl_tcp_challenge_ack_limit + 1) >> 1;
+
 		challenge_timestamp = now;
-		challenge_count = 0;
+		WRITE_ONCE(challenge_count, half +
+			   prandom_u32_max(sysctl_tcp_challenge_ack_limit));
 	}
-	if (++challenge_count <= sysctl_tcp_challenge_ack_limit) {
+	count = READ_ONCE(challenge_count);
+	if (count > 0) {
+		WRITE_ONCE(challenge_count, count - 1);
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPCHALLENGEACK);
 		tcp_send_ack(sk);
 	}
-- 
2.9.3

[patch added to 3.12-stable] net/irda: fix NULL pointer dereference on memory allocation failure

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit d3e6952cfb7ba5f4bfa29d4803ba91f96ce1204d ]

I ran into this:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
    task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000
    RIP: 0010:[<ffffffff82bbf066>]  [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710
    RSP: 0018:ffff880111747bb8  EFLAGS: 00010286
    RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358
    RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048
    RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000
    R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000
    R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000
    FS:  00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0
    Stack:
     0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220
     ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232
     ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000
    Call Trace:
     [<ffffffff82bca542>] irda_connect+0x562/0x1190
     [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0
     [<ffffffff825b4489>] SyS_connect+0x9/0x10
     [<ffffffff8100334c>] do_syscall_64+0x19c/0x410
     [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74
    RIP  [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710
     RSP <ffff880111747bb8>
    ---[ end trace 4cda2588bc055b30 ]---

The problem is that irda_open_tsap() can fail and leave self->tsap = NULL,
and then irttp_connect_request() almost immediately dereferences it.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/irda/af_irda.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index f8133ff5b081..c95bafa65f5b 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1039,8 +1039,11 @@ static int irda_connect(struct socket *sock, struct sockaddr *uaddr,
 	}
 
 	/* Check if we have opened a local TSAP */
-	if (!self->tsap)
-		irda_open_tsap(self, LSAP_ANY, addr->sir_name);
+	if (!self->tsap) {
+		err = irda_open_tsap(self, LSAP_ANY, addr->sir_name);
+		if (err)
+			goto out;
+	}
 
 	/* Move to connecting socket, start sending Connect Requests */
 	sock->state = SS_CONNECTING;
-- 
2.9.3

[patch added to 3.12-stable] tcp: consider recv buf for the initial window scale

[Jiri Slaby]

From: Soheil Hassas Yeganeh <soheil@google.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit f626300a3e776ccc9671b0dd94698fb3aa315966 ]

tcp_select_initial_window() intends to advertise a window
scaling for the maximum possible window size. To do so,
it considers the maximum of net.ipv4.tcp_rmem[2] and
net.core.rmem_max as the only possible upper-bounds.
However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE
to set the socket's receive buffer size to values
larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max.
Thus, SO_RCVBUFFORCE is effectively ignored by
tcp_select_initial_window().

To fix this, consider the maximum of net.ipv4.tcp_rmem[2],
net.core.rmem_max and socket's initial buffer space.

Fixes: b0573dea1fb3 ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/ipv4/tcp_output.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 47b27e9dd8cc..aa72c9d604a0 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -242,7 +242,8 @@ void tcp_select_initial_window(int __space, __u32 mss,
 		/* Set window scaling on max possible window
 		 * See RFC1323 for an explanation of the limit to 14
 		 */
-		space = max_t(u32, sysctl_tcp_rmem[2], sysctl_rmem_max);
+		space = max_t(u32, space, sysctl_tcp_rmem[2]);
+		space = max_t(u32, space, sysctl_rmem_max);
 		space = min_t(u32, space, *window_clamp);
 		while (space > 65535 && (*rcv_wscale) < 14) {
 			space >>= 1;
-- 
2.9.3

[patch added to 3.12-stable] MIPS: KVM: Fix mapped fault broken commpage handling

[Jiri Slaby]

From: James Hogan <james.hogan@imgtec.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit c604cffa93478f8888bec62b23d6073dad03d43a upstream.

kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at
virtual address 0 to PFN 0 if the guest has created its own mapping
there. The intention is unclear, but it may have been an attempt to
protect the zero page from being mapped to anything but the comm page in
code paths you wouldn't expect from genuine commpage accesses (guest
kernel mode cache instructions on that address, hitting trapping
instructions when executing from that address with a coincidental TLB
eviction during the KVM handling, and guest user mode accesses to that
address).

Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it
may not be at address 0 since commit 42aa12e74e91 ("MIPS: KVM: Move
commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be
interpreted as 0 (invalid).

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v3.10.y - v3.15.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kvm/kvm_tlb.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index c777dd36d4a8..1e6b1f124377 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -397,21 +397,27 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 	unsigned long entryhi = 0, entrylo0 = 0, entrylo1 = 0;
 	struct kvm *kvm = vcpu->kvm;
 	pfn_t pfn0, pfn1;
+	long tlb_lo[2];
 
+	tlb_lo[0] = tlb->tlb_lo0;
+	tlb_lo[1] = tlb->tlb_lo1;
 
-	if ((tlb->tlb_hi & VPN2_MASK) == 0) {
-		pfn0 = 0;
-		pfn1 = 0;
-	} else {
-		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0)
-			return -1;
+	/*
+	 * The commpage address must not be mapped to anything else if the guest
+	 * TLB contains entries nearby, or commpage accesses will break.
+	 */
+	if (!((tlb->tlb_hi ^ KVM_GUEST_COMMPAGE_ADDR) &
+			VPN2_MASK & (PAGE_MASK << 1)))
+		tlb_lo[(KVM_GUEST_COMMPAGE_ADDR >> PAGE_SHIFT) & 1] = 0;
 
-		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0)
-			return -1;
+	if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT) < 0)
+		return -1;
 
-		pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT];
-		pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT];
-	}
+	if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT) < 0)
+		return -1;
+
+	pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT];
+	pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT];
 
 	if (hpa0)
 		*hpa0 = pfn0 << PAGE_SHIFT;
@@ -423,9 +429,9 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 	entryhi = (tlb->tlb_hi & VPN2_MASK) | (KVM_GUEST_KERNEL_MODE(vcpu) ?
 			kvm_mips_get_kernel_asid(vcpu) : kvm_mips_get_user_asid(vcpu));
 	entrylo0 = mips3_paddr_to_tlbpfn(pfn0 << PAGE_SHIFT) | (0x3 << 3) |
-			(tlb->tlb_lo0 & MIPS3_PG_D) | (tlb->tlb_lo0 & MIPS3_PG_V);
+			(tlb_lo[0] & MIPS3_PG_D) | (tlb_lo[0] & MIPS3_PG_V);
 	entrylo1 = mips3_paddr_to_tlbpfn(pfn1 << PAGE_SHIFT) | (0x3 << 3) |
-			(tlb->tlb_lo1 & MIPS3_PG_D) | (tlb->tlb_lo1 & MIPS3_PG_V);
+			(tlb_lo[1] & MIPS3_PG_D) | (tlb_lo[1] & MIPS3_PG_V);
 
 #ifdef DEBUG
 	kvm_debug("@ %#lx tlb_lo0: 0x%08lx tlb_lo1: 0x%08lx\n", vcpu->arch.pc,
-- 
2.9.3

[patch added to 3.12-stable] MIPS: KVM: Add missing gfn range check

[Jiri Slaby]

From: James Hogan <james.hogan@imgtec.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8985d50382359e5bf118fdbefc859d0dbf6cebc7 upstream.

kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number
based on the guest TLB EntryLo values, however it is not range checked
to ensure it lies within the guest_pmap. If the physical memory the
guest refers to is out of range then dump the guest TLB and emit an
internal error.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v3.10.y - v3.15.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kvm/kvm_tlb.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index 1e6b1f124377..8aba2e54f90f 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -397,6 +397,7 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 	unsigned long entryhi = 0, entrylo0 = 0, entrylo1 = 0;
 	struct kvm *kvm = vcpu->kvm;
 	pfn_t pfn0, pfn1;
+	gfn_t gfn0, gfn1;
 	long tlb_lo[2];
 
 	tlb_lo[0] = tlb->tlb_lo0;
@@ -410,14 +411,24 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 			VPN2_MASK & (PAGE_MASK << 1)))
 		tlb_lo[(KVM_GUEST_COMMPAGE_ADDR >> PAGE_SHIFT) & 1] = 0;
 
-	if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT) < 0)
+	gfn0 = mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT;
+	gfn1 = mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT;
+	if (gfn0 >= kvm->arch.guest_pmap_npages ||
+	    gfn1 >= kvm->arch.guest_pmap_npages) {
+		kvm_err("%s: Invalid gfn: [%#llx, %#llx], EHi: %#lx\n",
+			__func__, gfn0, gfn1, tlb->tlb_hi);
+		kvm_mips_dump_guest_tlbs(vcpu);
+		return -1;
+	}
+
+	if (kvm_mips_map_page(kvm, gfn0) < 0)
 		return -1;
 
-	if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT) < 0)
+	if (kvm_mips_map_page(kvm, gfn1) < 0)
 		return -1;
 
-	pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT];
-	pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT];
+	pfn0 = kvm->arch.guest_pmap[gfn0];
+	pfn1 = kvm->arch.guest_pmap[gfn1];
 
 	if (hpa0)
 		*hpa0 = pfn0 << PAGE_SHIFT;
-- 
2.9.3

[patch added to 3.12-stable] MIPS: KVM: Fix gfn range check in kseg0 tlb faults

[Jiri Slaby]

From: James Hogan <james.hogan@imgtec.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 0741f52d1b980dbeb290afe67d88fc2928edd8ab upstream.

Two consecutive gfns are loaded into host TLB, so ensure the range check
isn't off by one if guest_pmap_npages is odd.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v3.10.y - v3.15.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kvm/kvm_tlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index 8aba2e54f90f..5a3c3731214f 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -312,7 +312,7 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
 	}
 
 	gfn = (KVM_GUEST_CPHYSADDR(badvaddr) >> PAGE_SHIFT);
-	if (gfn >= kvm->arch.guest_pmap_npages) {
+	if ((gfn | 1) >= kvm->arch.guest_pmap_npages) {
 		kvm_err("%s: Invalid gfn: %#llx, BadVaddr: %#lx\n", __func__,
 			gfn, badvaddr);
 		kvm_mips_dump_host_tlbs();
-- 
2.9.3

[patch added to 3.12-stable] MIPS: KVM: Propagate kseg0/mapped tlb fault errors

[Jiri Slaby]

From: James Hogan <james.hogan@imgtec.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9b731bcfdec4c159ad2e4312e25d69221709b96a upstream.

Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and
kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal
error since they normally indicate the guest accessed bad physical
memory or the commpage in an unexpected way.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[james.hogan@imgtec.com: Backport to v3.10.y - v3.15.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kvm/kvm_mips_emul.c | 33 ++++++++++++++++++++++++---------
 arch/mips/kvm/kvm_tlb.c       | 14 ++++++++++----
 2 files changed, 34 insertions(+), 13 deletions(-)

diff --git a/arch/mips/kvm/kvm_mips_emul.c b/arch/mips/kvm/kvm_mips_emul.c
index 33085819cd89..9f7643874fba 100644
--- a/arch/mips/kvm/kvm_mips_emul.c
+++ b/arch/mips/kvm/kvm_mips_emul.c
@@ -972,8 +972,13 @@ kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc, uint32_t cause,
 	preempt_disable();
 	if (KVM_GUEST_KSEGX(va) == KVM_GUEST_KSEG0) {
 
-		if (kvm_mips_host_tlb_lookup(vcpu, va) < 0) {
-			kvm_mips_handle_kseg0_tlb_fault(va, vcpu);
+		if (kvm_mips_host_tlb_lookup(vcpu, va) < 0 &&
+		    kvm_mips_handle_kseg0_tlb_fault(va, vcpu)) {
+			kvm_err("%s: handling mapped kseg0 tlb fault for %lx, vcpu: %p, ASID: %#lx\n",
+				__func__, va, vcpu, read_c0_entryhi());
+			er = EMULATE_FAIL;
+			preempt_enable();
+			goto done;
 		}
 	} else if ((KVM_GUEST_KSEGX(va) < KVM_GUEST_KSEG0) ||
 		   KVM_GUEST_KSEGX(va) == KVM_GUEST_KSEG23) {
@@ -1006,11 +1011,16 @@ kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc, uint32_t cause,
 								run, vcpu);
 				preempt_enable();
 				goto dont_update_pc;
-			} else {
-				/* We fault an entry from the guest tlb to the shadow host TLB */
-				kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb,
-								     NULL,
-								     NULL);
+			}
+			/* We fault an entry from the guest tlb to the shadow host TLB */
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb,
+								 NULL, NULL)) {
+				kvm_err("%s: handling mapped seg tlb fault for %lx, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, va, index, vcpu,
+					read_c0_entryhi());
+				er = EMULATE_FAIL;
+				preempt_enable();
+				goto done;
 			}
 		}
 	} else {
@@ -1821,8 +1831,13 @@ kvm_mips_handle_tlbmiss(unsigned long cause, uint32_t *opc,
 			     tlb->tlb_hi, tlb->tlb_lo0, tlb->tlb_lo1);
 #endif
 			/* OK we have a Guest TLB entry, now inject it into the shadow host TLB */
-			kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb, NULL,
-							     NULL);
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb,
+								 NULL, NULL)) {
+				kvm_err("%s: handling mapped seg tlb fault for %lx, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, va, index, vcpu,
+					read_c0_entryhi());
+				er = EMULATE_FAIL;
+			}
 		}
 	}
 
diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index 5a3c3731214f..4bee4397dca8 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -926,10 +926,16 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
 				local_irq_restore(flags);
 				return KVM_INVALID_INST;
 			}
-			kvm_mips_handle_mapped_seg_tlb_fault(vcpu,
-							     &vcpu->arch.
-							     guest_tlb[index],
-							     NULL, NULL);
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu,
+						&vcpu->arch.guest_tlb[index],
+						NULL, NULL)) {
+				kvm_err("%s: handling mapped seg tlb fault failed for %p, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, opc, index, vcpu,
+					read_c0_entryhi());
+				kvm_mips_dump_guest_tlbs(vcpu);
+				local_irq_restore(flags);
+				return KVM_INVALID_INST;
+			}
 			inst = *(opc);
 		}
 		local_irq_restore(flags);
-- 
2.9.3

[patch added to 3.12-stable] HID: i2c-hid: set power sleep before shutdown

[Jiri Slaby]

From: Guohua Zhong <ghzhong@yifangdigital.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit d9f448e3d71f3a703977196fa73be533b4b85adc upstream.

Add i2c_hid_shutdown for i2c-hid driver to send suspend cmd & free
irq before device shutdown.

Some HW design (i.e. Umaro, a chromebook model) is that the power to
i2c hid device won't down after device shutdown. Also the i2c-hid driver
do not send suspend cmd to the hid i2c device and free its irq before
shutdown.So if We touch the touchscreen or some other i2c hid device,
the power consumtion will be go up even when the device is in shutdown
state.

Though the root cause maybe a HW issue. But it seems that it is a
good pratice to set power sleep for i2c-hid device before shutdown.

Signed-off-by: Guohua Zhong <ghzhong@yifangdigital.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/hid/i2c-hid/i2c-hid.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index f62c65ec117e..0c65412cf5d4 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -1075,6 +1075,14 @@ static int i2c_hid_remove(struct i2c_client *client)
 	return 0;
 }
 
+static void i2c_hid_shutdown(struct i2c_client *client)
+{
+	struct i2c_hid *ihid = i2c_get_clientdata(client);
+
+	i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+	free_irq(client->irq, ihid);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int i2c_hid_suspend(struct device *dev)
 {
@@ -1125,7 +1133,7 @@ static struct i2c_driver i2c_hid_driver = {
 
 	.probe		= i2c_hid_probe,
 	.remove		= i2c_hid_remove,
-
+	.shutdown	= i2c_hid_shutdown,
 	.id_table	= i2c_hid_id_table,
 };
 
-- 
2.9.3

[patch added to 3.12-stable] HID: multitouch: Add MT_QUIRK_NOT_SEEN_MEANS_UP to Surface Pro 3

[Jiri Slaby]

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a80e803a2ae4efa5efbcfa97dcbbc48d15226cf9 upstream.

The firmware found in the touch screen of an SP3 is buggy and may miss
to send lift off reports for contacts. Try to work around that issue by
using MT_QUIRK_NOT_SEEN_MEANS_UP.

based on a patch from: Daniel Martin <consume.noise@gmail.com>

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/hid/hid-multitouch.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index e7c2af5d3811..0ffc0a4d5182 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1281,6 +1281,11 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
 			USB_DEVICE_ID_PENMOUNT_PCI) },
 
+	/* Ntrig Panel */
+	{ .driver_data = MT_CLS_NSMU,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_NTRIG, 0x1b05) },
+
 	/* PixArt optical touch screen */
 	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
 		MT_USB_DEVICE(USB_VENDOR_ID_PIXART,
-- 
2.9.3

[patch added to 3.12-stable] x86/mm: Improve switch_mm() barrier comments

[Jiri Slaby]

From: Andy Lutomirski <luto@kernel.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 4eaffdd5a5fe6ff9f95e1ab4de1ac904d5e0fa8b upstream.

My previous comments were still a bit confusing and there was a
typo. Fix it up.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 71b3c126e611 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization")
Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/x86/include/asm/mmu_context.h | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 20cf2c4e1872..50f622dc0b1a 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -102,14 +102,16 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		 * be sent, and CPU 0's TLB will contain a stale entry.)
 		 *
 		 * The bad outcome can occur if either CPU's load is
-		 * reordered before that CPU's store, so both CPUs much
+		 * reordered before that CPU's store, so both CPUs must
 		 * execute full barriers to prevent this from happening.
 		 *
 		 * Thus, switch_mm needs a full barrier between the
 		 * store to mm_cpumask and any operation that could load
-		 * from next->pgd.  This barrier synchronizes with
-		 * remote TLB flushers.  Fortunately, load_cr3 is
-		 * serializing and thus acts as a full barrier.
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
 		 *
 		 */
 		load_cr3(next->pgd);
@@ -140,9 +142,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 			 * tlb flush IPI delivery. We must reload CR3
 			 * to make sure to use no freed page tables.
 			 *
-			 * As above, this is a barrier that forces
-			 * TLB repopulation to be ordered after the
-			 * store to mm_cpumask.
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
 			 */
 			load_cr3(next->pgd);
 			load_mm_ldt(next);
-- 
2.9.3

[patch added to 3.12-stable] arm: oabi compat: add missing access checks

[Jiri Slaby]

From: Dave Weinstein <olorin@google.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream.

Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.

Reported-by: Chiachih Wu <wuchiachih@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dave Weinstein <olorin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/kernel/sys_oabi-compat.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 3e94811690ce..a0aee80b608d 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -275,8 +275,12 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
 	mm_segment_t fs;
 	long ret, err, i;
 
-	if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
+	if (maxevents <= 0 ||
+			maxevents > (INT_MAX/sizeof(*kbuf)) ||
+			maxevents > (INT_MAX/sizeof(*events)))
 		return -EINVAL;
+	if (!access_ok(VERIFY_WRITE, events, sizeof(*events) * maxevents))
+		return -EFAULT;
 	kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
 	if (!kbuf)
 		return -ENOMEM;
@@ -313,6 +317,8 @@ asmlinkage long sys_oabi_semtimedop(int semid,
 
 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
+	if (!access_ok(VERIFY_READ, tsops, sizeof(*tsops) * nsops))
+		return -EFAULT;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
-- 
2.9.3

[patch added to 3.12-stable] KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspace

[Jiri Slaby]

From: David Howells <dhowells@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 20f06ed9f61a185c6dabd662c310bed6189470df upstream.

MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl.  The latter will work in a lot of cases, thereby hiding
the issue.

Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: keyrings@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kernel/scall64-n32.S | 2 +-
 arch/mips/kernel/scall64-o32.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index cab150789c8d..b657fbefc466 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -349,7 +349,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key
 	PTR	sys_request_key
-	PTR	sys_keyctl			/* 6245 */
+	PTR	compat_sys_keyctl		/* 6245 */
 	PTR	sys_set_thread_area
 	PTR	sys_inotify_init
 	PTR	sys_inotify_add_watch
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 37605dc8eef7..bf56d7e271dd 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -474,7 +474,7 @@ sys_call_table:
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key			/* 4280 */
 	PTR	sys_request_key
-	PTR	sys_keyctl
+	PTR	compat_sys_keyctl
 	PTR	sys_set_thread_area
 	PTR	sys_inotify_init
 	PTR	sys_inotify_add_watch		/* 4285 */
-- 
2.9.3

[patch added to 3.12-stable] apparmor: fix ref count leak when profile sha1 hash is read

[Jiri Slaby]

From: John Johansen <john.johansen@canonical.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 0b938a2e2cf0b0a2c8bac9769111545aff0fee97 upstream.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 security/apparmor/apparmorfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index 7db9954f1af2..b30489856741 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -331,6 +331,7 @@ static int aa_fs_seq_hash_show(struct seq_file *seq, void *v)
 			seq_printf(seq, "%.2x", profile->hash[i]);
 		seq_puts(seq, "\n");
 	}
+	aa_put_profile(profile);
 
 	return 0;
 }
-- 
2.9.3

[patch added to 3.12-stable] block: fix use-after-free in seq file

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 77da160530dd1dc94f6ae15a981f24e5f0021e84 upstream.

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 block/genhd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/genhd.c b/block/genhd.c
index 9316f5fd416f..38d4ba122a43 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -829,6 +829,7 @@ static void disk_seqf_stop(struct seq_file *seqf, void *v)
 	if (iter) {
 		class_dev_iter_exit(iter);
 		kfree(iter);
+		seqf->private = NULL;
 	}
 }
 
-- 
2.9.3

[patch added to 3.12-stable] sysv, ipc: fix security-layer leaking

[Jiri Slaby]

From: Fabian Frederick <fabf@skynet.be>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9b24fef9f0410fb5364245d6cc2bd044cc064007 upstream.

Commit 53dad6d3a8e5 ("ipc: fix race with LSMs") updated ipc_rcu_putref()
to receive rcu freeing function but used generic ipc_rcu_free() instead
of msg_rcu_free() which does security cleaning.

Running LTP msgsnd06 with kmemleak gives the following:

  cat /sys/kernel/debug/kmemleak

  unreferenced object 0xffff88003c0a11f8 (size 8):
    comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s)
    hex dump (first 8 bytes):
      1b 00 00 00 01 00 00 00                          ........
    backtrace:
      kmemleak_alloc+0x23/0x40
      kmem_cache_alloc_trace+0xe1/0x180
      selinux_msg_queue_alloc_security+0x3f/0xd0
      security_msg_queue_alloc+0x2e/0x40
      newque+0x4e/0x150
      ipcget+0x159/0x1b0
      SyS_msgget+0x39/0x40
      entry_SYSCALL_64_fastpath+0x13/0x8f

Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to
only use ipc_rcu_free in case of security allocation failure in newary()

Fixes: 53dad6d3a8e ("ipc: fix race with LSMs")
Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 ipc/msg.c |  2 +-
 ipc/sem.c | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/ipc/msg.c b/ipc/msg.c
index 32aaaab15c5c..f8c22afff450 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -730,7 +730,7 @@ long do_msgsnd(int msqid, long mtype, void __user *mtext,
 		rcu_read_lock();
 		ipc_lock_object(&msq->q_perm);
 
-		ipc_rcu_putref(msq, ipc_rcu_free);
+		ipc_rcu_putref(msq, msg_rcu_free);
 		if (msq->q_perm.deleted) {
 			err = -EIDRM;
 			goto out_unlock0;
diff --git a/ipc/sem.c b/ipc/sem.c
index b064468e876f..7fb486739cbb 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -442,7 +442,7 @@ static inline struct sem_array *sem_obtain_object_check(struct ipc_namespace *ns
 static inline void sem_lock_and_putref(struct sem_array *sma)
 {
 	sem_lock(sma, NULL, -1);
-	ipc_rcu_putref(sma, ipc_rcu_free);
+	ipc_rcu_putref(sma, sem_rcu_free);
 }
 
 static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
@@ -1373,7 +1373,7 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 			rcu_read_unlock();
 			sem_io = ipc_alloc(sizeof(ushort)*nsems);
 			if(sem_io == NULL) {
-				ipc_rcu_putref(sma, ipc_rcu_free);
+				ipc_rcu_putref(sma, sem_rcu_free);
 				return -ENOMEM;
 			}
 
@@ -1407,20 +1407,20 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 		if(nsems > SEMMSL_FAST) {
 			sem_io = ipc_alloc(sizeof(ushort)*nsems);
 			if(sem_io == NULL) {
-				ipc_rcu_putref(sma, ipc_rcu_free);
+				ipc_rcu_putref(sma, sem_rcu_free);
 				return -ENOMEM;
 			}
 		}
 
 		if (copy_from_user (sem_io, p, nsems*sizeof(ushort))) {
-			ipc_rcu_putref(sma, ipc_rcu_free);
+			ipc_rcu_putref(sma, sem_rcu_free);
 			err = -EFAULT;
 			goto out_free;
 		}
 
 		for (i = 0; i < nsems; i++) {
 			if (sem_io[i] > SEMVMX) {
-				ipc_rcu_putref(sma, ipc_rcu_free);
+				ipc_rcu_putref(sma, sem_rcu_free);
 				err = -ERANGE;
 				goto out_free;
 			}
@@ -1710,7 +1710,7 @@ static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 	/* step 2: allocate new undo structure */
 	new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
 	if (!new) {
-		ipc_rcu_putref(sma, ipc_rcu_free);
+		ipc_rcu_putref(sma, sem_rcu_free);
 		return ERR_PTR(-ENOMEM);
 	}
 
-- 
2.9.3

[patch added to 3.12-stable] fuse: fix wrong assignment of ->flags in fuse_send_init()

[Jiri Slaby]

From: Wei Fang <fangwei1@huawei.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9446385f05c9af25fed53dbed3cc75763730be52 upstream.

FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 69fe05c90ed5 ("fuse: add missing INIT flags")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/fuse/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 68f12d51dbea..d6ce83edc800 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -913,7 +913,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
 		FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK |
 		FUSE_SPLICE_WRITE | FUSE_SPLICE_MOVE | FUSE_SPLICE_READ |
-		FUSE_FLOCK_LOCKS | FUSE_IOCTL_DIR | FUSE_AUTO_INVAL_DATA |
+		FUSE_FLOCK_LOCKS | FUSE_HAS_IOCTL_DIR | FUSE_AUTO_INVAL_DATA |
 		FUSE_DO_READDIRPLUS | FUSE_READDIRPLUS_AUTO | FUSE_ASYNC_DIO;
 	req->in.h.opcode = FUSE_INIT;
 	req->in.numargs = 1;
-- 
2.9.3

[patch added to 3.12-stable] crypto: gcm - Filter out async ghash if necessary

[Jiri Slaby]

From: Herbert Xu <herbert@gondor.apana.org.au>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b30bdfa86431afbafe15284a3ad5ac19b49b88e3 upstream.

As it is if you ask for a sync gcm you may actually end up with
an async one because it does not filter out async implementations
of ghash.

This patch fixes this by adding the necessary filter when looking
for ghash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 crypto/gcm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/crypto/gcm.c b/crypto/gcm.c
index f0bd00b15f26..d2a0f7371cf0 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -716,7 +716,9 @@ static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb,
 
 	ghash_alg = crypto_find_alg(ghash_name, &crypto_ahash_type,
 				    CRYPTO_ALG_TYPE_HASH,
-				    CRYPTO_ALG_TYPE_AHASH_MASK);
+				    CRYPTO_ALG_TYPE_AHASH_MASK |
+				    crypto_requires_sync(algt->type,
+							 algt->mask));
 	if (IS_ERR(ghash_alg))
 		return ERR_CAST(ghash_alg);
 
-- 
2.9.3

[patch added to 3.12-stable] crypto: scatterwalk - Fix test in scatterwalk_done

[Jiri Slaby]

From: Herbert Xu <herbert@gondor.apana.org.au>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 5f070e81bee35f1b7bd1477bb223a873ff657803 upstream.

When there is more data to be processed, the current test in
scatterwalk_done may prevent us from calling pagedone even when
we should.

In particular, if we're on an SG entry spanning multiple pages
where the last page is not a full page, we will incorrectly skip
calling pagedone on the second last page.

This patch fixes this by adding a separate test for whether we've
reached the end of a page.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 crypto/scatterwalk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c
index 79ca2278c2a3..0ec7a6fa3d4d 100644
--- a/crypto/scatterwalk.c
+++ b/crypto/scatterwalk.c
@@ -68,7 +68,8 @@ static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
 
 void scatterwalk_done(struct scatter_walk *walk, int out, int more)
 {
-	if (!(scatterwalk_pagelen(walk) & (PAGE_SIZE - 1)) || !more)
+	if (!more || walk->offset >= walk->sg->offset + walk->sg->length ||
+	    !(walk->offset & (PAGE_SIZE - 1)))
 		scatterwalk_pagedone(walk, out, more);
 }
 EXPORT_SYMBOL_GPL(scatterwalk_done);
-- 
2.9.3

[patch added to 3.12-stable] ext4: check for extents that wrap around

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f70749ca42943faa4d4dcce46dfdcaadb1d0c4b6 upstream.

An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:

	ext4_lblk_t last = lblock + len - 1;

	if (len == 0 || lblock > last)
		return 0;

since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().

We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).

Fixes: 5946d0893 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865f ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/extents.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6b9d96bdd35c..1a13089883af 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -359,9 +359,13 @@ static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
 	ext4_fsblk_t block = ext4_ext_pblock(ext);
 	int len = ext4_ext_get_actual_len(ext);
 	ext4_lblk_t lblock = le32_to_cpu(ext->ee_block);
-	ext4_lblk_t last = lblock + len - 1;
 
-	if (len == 0 || lblock > last)
+	/*
+	 * We allow neither:
+	 *  - zero length
+	 *  - overflow/wrap-around
+	 */
+	if (lblock + len <= lblock)
 		return 0;
 	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len);
 }
-- 
2.9.3

[patch added to 3.12-stable] ext4: fix deadlock during page writeback

[Jiri Slaby]

From: Jan Kara <jack@suse.cz>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 646caa9c8e196880b41cd3e3d33a2ebc752bdb85 upstream.

Commit 06bd3c36a733 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]

Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/inode.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index cf5070bb8695..3f43c141ab68 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2575,13 +2575,36 @@ retry:
 				done = true;
 			}
 		}
-		ext4_journal_stop(handle);
+		/*
+		 * Caution: If the handle is synchronous,
+		 * ext4_journal_stop() can wait for transaction commit
+		 * to finish which may depend on writeback of pages to
+		 * complete or on page lock to be released.  In that
+		 * case, we have to wait until after after we have
+		 * submitted all the IO, released page locks we hold,
+		 * and dropped io_end reference (for extent conversion
+		 * to be able to complete) before stopping the handle.
+		 */
+		if (!ext4_handle_valid(handle) || handle->h_sync == 0) {
+			ext4_journal_stop(handle);
+			handle = NULL;
+		}
 		/* Submit prepared bio */
 		ext4_io_submit(&mpd.io_submit);
 		/* Unlock pages we didn't use */
 		mpage_release_unused_pages(&mpd, give_up_on_write);
-		/* Drop our io_end reference we got from init */
-		ext4_put_io_end(mpd.io_submit.io_end);
+		/*
+		 * Drop our io_end reference we got from init. We have
+		 * to be careful and use deferred io_end finishing if
+		 * we are still holding the transaction as we can
+		 * release the last reference to io_end which may end
+		 * up doing unwritten extent conversion.
+		 */
+		if (handle) {
+			ext4_put_io_end_defer(mpd.io_submit.io_end);
+			ext4_journal_stop(handle);
+		} else
+			ext4_put_io_end(mpd.io_submit.io_end);
 
 		if (ret == -ENOSPC && sbi->s_journal) {
 			/*
-- 
2.9.3

[patch added to 3.12-stable] ext4: don't call ext4_should_journal_data() on the journal inode

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 6a7fd522a7c94cdef0a3b08acf8e6702056e635c upstream.

If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up.  In that case, the iput() on the journal inode can
end up causing a BUG().

Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.

Fixes: 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa84 ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/inode.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3f43c141ab68..98ba65482e46 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -204,9 +204,9 @@ void ext4_evict_inode(struct inode *inode)
 		 * Note that directories do not have this problem because they
 		 * don't use page cache.
 		 */
-		if (ext4_should_journal_data(inode) &&
-		    (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode)) &&
-		    inode->i_ino != EXT4_JOURNAL_INO) {
+		if (inode->i_ino != EXT4_JOURNAL_INO &&
+		    ext4_should_journal_data(inode) &&
+		    (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode))) {
 			journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
 			tid_t commit_tid = EXT4_I(inode)->i_datasync_tid;
 
-- 
2.9.3

[patch added to 3.12-stable] ext4: short-cut orphan cleanup on error

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit c65d5c6c81a1f27dec5f627f67840726fcd146de upstream.

If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.

    EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
    EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
    Aborting journal on device loop0-8.
    EXT4-fs (loop0): Remounting filesystem read-only
    EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
    EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
    EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
    [...]

See-also: c9eb13a9105 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/super.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index ab5829f298e7..238c24b606f0 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2203,6 +2203,16 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 	while (es->s_last_orphan) {
 		struct inode *inode;
 
+		/*
+		 * We may have encountered an error during cleanup; if
+		 * so, skip the rest.
+		 */
+		if (EXT4_SB(sb)->s_mount_state & EXT4_ERROR_FS) {
+			jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
+			es->s_last_orphan = 0;
+			break;
+		}
+
 		inode = ext4_orphan_get(sb, le32_to_cpu(es->s_last_orphan));
 		if (IS_ERR(inode)) {
 			es->s_last_orphan = 0;
-- 
2.9.3

[patch added to 3.12-stable] ext4: fix reference counting bug on block allocation error

[Jiri Slaby]

From: Vegard Nossum <vegard.nossum@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 554a5ccc4e4a20c5f3ec859de0842db4b4b9c77e upstream.

If we hit this error when mounted with errors=continue or
errors=remount-ro:

    EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata

then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to
continue. However, ext4_mb_release_context() is the wrong thing to call
here since we are still actually using the allocation context.

Instead, just error out. We could retry the allocation, but there is a
possibility of getting stuck in an infinite loop instead, so this seems
safer.

[ Fixed up so we don't return EAGAIN to userspace. --tytso ]

Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/mballoc.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 4a79ce1ecaa1..fcb205f69ed6 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2897,7 +2897,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 		ext4_error(sb, "Allocating blocks %llu-%llu which overlap "
 			   "fs metadata", block, block+len);
 		/* File system mounted not to panic on error
-		 * Fix the bitmap and repeat the block allocation
+		 * Fix the bitmap and return EUCLEAN
 		 * We leak some of the blocks here.
 		 */
 		ext4_lock_group(sb, ac->ac_b_ex.fe_group);
@@ -2906,7 +2906,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 		ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
 		err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
 		if (!err)
-			err = -EAGAIN;
+			err = -EUCLEAN;
 		goto out_err;
 	}
 
@@ -4476,18 +4476,7 @@ repeat:
 	}
 	if (likely(ac->ac_status == AC_STATUS_FOUND)) {
 		*errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_clstrs);
-		if (*errp == -EAGAIN) {
-			/*
-			 * drop the reference that we took
-			 * in ext4_mb_use_best_found
-			 */
-			ext4_mb_release_context(ac);
-			ac->ac_b_ex.fe_group = 0;
-			ac->ac_b_ex.fe_start = 0;
-			ac->ac_b_ex.fe_len = 0;
-			ac->ac_status = AC_STATUS_CONTINUE;
-			goto repeat;
-		} else if (*errp) {
+		if (*errp) {
 			ext4_discard_allocated_blocks(ac);
 			goto errout;
 		} else {
-- 
2.9.3

[patch added to 3.12-stable] usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()

[Jiri Slaby]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 15e4292a2d21e9997fdb2b8c014cc461b3f268f0 upstream.

This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.

For example:
 # modprobe g_multi file=usb-storage.bin
 # ifconfig usb0 192.168.1.1 up
 (During the USB host is sending file to the mass storage)
 # ifconfig usb0 down

In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.

So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
 - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
 - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()

Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/renesas_usbhs/mod_gadget.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 3385aeb5a364..0c71298c7980 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -558,6 +558,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct usbhs_pipe *pipe;
 	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
 
 	/*
 	 * if it already have pipe,
@@ -566,7 +569,8 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
 		usbhs_pipe_sequence_data0(uep->pipe);
-		return 0;
+		ret = 0;
+		goto usbhsg_ep_enable_end;
 	}
 
 	pipe = usbhs_pipe_malloc(priv,
@@ -594,6 +598,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 		ret = 0;
 	}
 
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
 	return ret;
 }
 
-- 
2.9.3

[patch added to 3.12-stable] USB: serial: option: add support for Telit LE910 PID 0x1206

[Jiri Slaby]

From: Daniele Palmas <dnlplm@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 3c0415fa08548e3bc63ef741762664497ab187ed upstream.

This patch adds support for 0x1206 PID of Telit LE910.

Since the interfaces positions are the same than the ones for
0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bcb6f5c2bae4..006a2a721edf 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -274,6 +274,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
+#define TELIT_PRODUCT_LE910_USBCFG4		0x1206
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -1206,6 +1207,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
-- 
2.9.3

[patch added to 3.12-stable] gpio: pca953x: Fix NBANK calculation for PCA9536

[Jiri Slaby]

From: Vignesh R <vigneshr@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a246b8198f776a16d1d3a3bbfc2d437bad766b29 upstream.

NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/gpio/gpio-pca953x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index cdd1aa12b895..7bb81d63cc3d 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -75,7 +75,7 @@ MODULE_DEVICE_TABLE(i2c, pca953x_id);
 #define MAX_BANK 5
 #define BANK_SZ 8
 
-#define NBANK(chip) (chip->gpio_chip.ngpio / BANK_SZ)
+#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
 
 struct pca953x_chip {
 	unsigned gpio_start;
-- 
2.9.3

[patch added to 3.12-stable] s5p-mfc: Set device name for reserved memory region devs

[Jiri Slaby]

From: Javier Martinez Canillas <javier@osg.samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 29debab0a94035a390801d1f177d171d014b7765 upstream.

The devices don't have a name set, so makes dev_name() returns NULL which
makes harder to identify the devices that are causing issues, for example:

WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90
Device '(null)' does not have a release() function, it is broken and must be fixed.

And after setting the device name:

WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.

Fixes: 6e83e6e25eb4 ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 4a521a9a6e9d..f48655b06aef 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1012,6 +1012,8 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 		mfc_err("Not enough memory\n");
 		return -ENOMEM;
 	}
+
+	dev_set_name(dev->mem_dev_l, "%s", "s5p-mfc-l");
 	device_initialize(dev->mem_dev_l);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-l", mem_info, 2);
@@ -1029,6 +1031,8 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 		mfc_err("Not enough memory\n");
 		return -ENOMEM;
 	}
+
+	dev_set_name(dev->mem_dev_r, "%s", "s5p-mfc-r");
 	device_initialize(dev->mem_dev_r);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-r", mem_info, 2);
-- 
2.9.3

[patch added to 3.12-stable] s5p-mfc: Add release callback for memory region devs

[Jiri Slaby]

From: Javier Martinez Canillas <javier@osg.samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 6311f1261f59ce5e51fbe5cc3b5e7737197316ac upstream.

When s5p_mfc_remove() calls put_device() for the reserved memory region
devs, the driver core warns that the dev doesn't have a release callback:

WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90
Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed.

Also, the declared DMA memory using dma_declare_coherent_memory() isn't
relased so add a dev .release that calls dma_release_declared_memory().

Fixes: 6e83e6e25eb4 ("[media] s5p-mfc: Fix kernel warning on memory init")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index f48655b06aef..bb0c1e6016e2 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1000,6 +1000,11 @@ static int match_child(struct device *dev, void *data)
 	return !strcmp(dev_name(dev), (char *)data);
 }
 
+static void s5p_mfc_memdev_release(struct device *dev)
+{
+	dma_release_declared_memory(dev);
+}
+
 static void *mfc_get_drv_data(struct platform_device *pdev);
 
 static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
@@ -1014,6 +1019,7 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 	}
 
 	dev_set_name(dev->mem_dev_l, "%s", "s5p-mfc-l");
+	dev->mem_dev_l->release = s5p_mfc_memdev_release;
 	device_initialize(dev->mem_dev_l);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-l", mem_info, 2);
@@ -1033,6 +1039,7 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 	}
 
 	dev_set_name(dev->mem_dev_r, "%s", "s5p-mfc-r");
+	dev->mem_dev_r->release = s5p_mfc_memdev_release;
 	device_initialize(dev->mem_dev_r);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-r", mem_info, 2);
-- 
2.9.3

[patch added to 3.12-stable] Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU

[Jiri Slaby]

From: Amadeusz Sławiński <amadeusz.slawinski@tieto.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 23bc6ab0a0912146fd674a0becc758c3162baabc upstream.

When we retrieve imtu value from userspace we should use 16 bit pointer
cast instead of 32 as it's defined that way in headers. Fixes setsockopt
calls on big-endian platforms.

Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/bluetooth/l2cap_sock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 2710e850b74c..1fbd26feda09 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -720,7 +720,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 			break;
 		}
 
-		if (get_user(opt, (u32 __user *) optval)) {
+		if (get_user(opt, (u16 __user *) optval)) {
 			err = -EFAULT;
 			break;
 		}
-- 
2.9.3

[patch added to 3.12-stable] cifs: Check for existing directory when opening file with O_CREAT

[Jiri Slaby]

From: Sachin Prabhu <sprabhu@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8d9535b6efd86e6c07da59f97e68f44efb7fe080 upstream.

When opening a file with O_CREAT flag, check to see if the file opened
is an existing directory.

This prevents the directory from being opened which subsequently causes
a crash when the close function for directories cifs_closedir() is called
which frees up the file->private_data memory while the file is still
listed on the open file list for the tcon.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/cifs/dir.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index f039c23d003d..7347f1678fa7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -229,6 +229,13 @@ cifs_do_create(struct inode *inode, struct dentry *direntry, unsigned int xid,
 				goto cifs_create_get_file_info;
 			}
 
+			if (S_ISDIR(newinode->i_mode)) {
+				CIFSSMBClose(xid, tcon, fid->netfid);
+				iput(newinode);
+				rc = -EISDIR;
+				goto out;
+			}
+
 			if (!S_ISREG(newinode->i_mode)) {
 				/*
 				 * The server may allow us to open things like
@@ -399,10 +406,14 @@ cifs_create_set_dentry:
 	if (rc != 0) {
 		cifs_dbg(FYI, "Create worked, get_inode_info failed rc = %d\n",
 			 rc);
-		if (server->ops->close)
-			server->ops->close(xid, tcon, fid);
-		goto out;
+		goto out_err;
 	}
+
+	if (S_ISDIR(newinode->i_mode)) {
+		rc = -EISDIR;
+		goto out_err;
+	}
+
 	d_drop(direntry);
 	d_add(direntry, newinode);
 
@@ -410,6 +421,13 @@ out:
 	kfree(buf);
 	kfree(full_path);
 	return rc;
+
+out_err:
+	if (server->ops->close)
+		server->ops->close(xid, tcon, fid);
+	if (newinode)
+		iput(newinode);
+	goto out;
 }
 
 int
-- 
2.9.3

[patch added to 3.12-stable] cifs: fix crash due to race in hmac(md5) handling

[Jiri Slaby]

From: Rabin Vincent <rabinv@axis.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit bd975d1eead2558b76e1079e861eacf1f678b73b upstream.

The secmech hmac(md5) structures are present in the TCP_Server_Info
struct and can be shared among multiple CIFS sessions.  However, the
server mutex is not currently held when these structures are allocated
and used, which can lead to a kernel crashes, as in the scenario below:

mount.cifs(8) #1				mount.cifs(8) #2

Is secmech.sdeschmaccmd5 allocated?
// false

						Is secmech.sdeschmaccmd5 allocated?
						// false

secmech.hmacmd = crypto_alloc_shash..
secmech.sdeschmaccmd5 = kzalloc..
sdeschmaccmd5->shash.tfm = &secmec.hmacmd;

						secmech.sdeschmaccmd5 = kzalloc
						// sdeschmaccmd5->shash.tfm
						// not yet assigned

crypto_shash_update()
 deref NULL sdeschmaccmd5->shash.tfm

 Unable to handle kernel paging request at virtual address 00000030
 epc   : 8027ba34 crypto_shash_update+0x38/0x158
 ra    : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84
 Call Trace:
  crypto_shash_update+0x38/0x158
  setup_ntlmv2_rsp+0x4bc/0xa84
  build_ntlmssp_auth_blob+0xbc/0x34c
  sess_auth_rawntlmssp_authenticate+0xac/0x248
  CIFS_SessSetup+0xf0/0x178
  cifs_setup_session+0x4c/0x84
  cifs_get_smb_ses+0x2c8/0x314
  cifs_mount+0x38c/0x76c
  cifs_do_mount+0x98/0x440
  mount_fs+0x20/0xc0
  vfs_kern_mount+0x58/0x138
  do_mount+0x1e8/0xccc
  SyS_mount+0x88/0xd4
  syscall_common+0x30/0x54

Fix this by locking the srv_mutex around the code which uses these
hmac(md5) structures.  All the other secmech algos already have similar
locking.

Fixes: 95dc8dd14e2e84cc ("Limit allocation of crypto mechanisms to dialect which requires")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/cifs/cifsencrypt.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 684e1c5ad46d..84ae0a5a8ce0 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -720,24 +720,26 @@ setup_ntlmv2_rsp(struct cifs_ses *ses, const struct nls_table *nls_cp)
 
 	memcpy(ses->auth_key.response + baselen, tiblob, tilen);
 
+	mutex_lock(&ses->server->srv_mutex);
+
 	rc = crypto_hmacmd5_alloc(ses->server);
 	if (rc) {
 		cifs_dbg(VFS, "could not crypto alloc hmacmd5 rc %d\n", rc);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	/* calculate ntlmv2_hash */
 	rc = calc_ntlmv2_hash(ses, ntlmv2_hash, nls_cp);
 	if (rc) {
 		cifs_dbg(VFS, "could not get v2 hash rc %d\n", rc);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	/* calculate first part of the client response (CR1) */
 	rc = CalcNTLMv2_response(ses, ntlmv2_hash);
 	if (rc) {
 		cifs_dbg(VFS, "Could not calculate CR1 rc: %d\n", rc);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	/* now calculate the session key for NTLMv2 */
@@ -746,13 +748,13 @@ setup_ntlmv2_rsp(struct cifs_ses *ses, const struct nls_table *nls_cp)
 	if (rc) {
 		cifs_dbg(VFS, "%s: Could not set NTLMV2 Hash as a key\n",
 			 __func__);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	rc = crypto_shash_init(&ses->server->secmech.sdeschmacmd5->shash);
 	if (rc) {
 		cifs_dbg(VFS, "%s: Could not init hmacmd5\n", __func__);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	rc = crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
@@ -760,7 +762,7 @@ setup_ntlmv2_rsp(struct cifs_ses *ses, const struct nls_table *nls_cp)
 		CIFS_HMAC_MD5_HASH_SIZE);
 	if (rc) {
 		cifs_dbg(VFS, "%s: Could not update with response\n", __func__);
-		goto setup_ntlmv2_rsp_ret;
+		goto unlock;
 	}
 
 	rc = crypto_shash_final(&ses->server->secmech.sdeschmacmd5->shash,
@@ -768,6 +770,8 @@ setup_ntlmv2_rsp(struct cifs_ses *ses, const struct nls_table *nls_cp)
 	if (rc)
 		cifs_dbg(VFS, "%s: Could not generate md5 hash\n", __func__);
 
+unlock:
+	mutex_unlock(&ses->server->srv_mutex);
 setup_ntlmv2_rsp_ret:
 	kfree(tiblob);
 
-- 
2.9.3

[patch added to 3.12-stable] CIFS: Fix a possible invalid memory access in smb2_query_symlink()

[Jiri Slaby]

From: Pavel Shilovsky <pshilovsky@samba.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 7893242e2465aea6f2cbc2639da8fa5ce96e8cc2 upstream.

During following a symbolic link we received err_buf from SMB2_open().
While the validity of SMB2 error response is checked previously
in smb2_check_message() a symbolic link payload is not checked at all.
Fix it by adding such checks.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/cifs/smb2ops.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 57519567b2ac..a3a7a52aef04 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -598,6 +598,9 @@ smb2_new_lease_key(struct cifs_fid *fid)
 	get_random_bytes(fid->lease_key, SMB2_LEASE_KEY_SIZE);
 }
 
+#define SMB2_SYMLINK_STRUCT_SIZE \
+	(sizeof(struct smb2_err_rsp) - 1 + sizeof(struct smb2_symlink_err_rsp))
+
 static int
 smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 		   const char *full_path, char **target_path,
@@ -610,7 +613,10 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 	struct cifs_fid fid;
 	struct smb2_err_rsp *err_buf = NULL;
 	struct smb2_symlink_err_rsp *symlink;
-	unsigned int sub_len, sub_offset;
+	unsigned int sub_len;
+	unsigned int sub_offset;
+	unsigned int print_len;
+	unsigned int print_offset;
 
 	cifs_dbg(FYI, "%s: path: %s\n", __func__, full_path);
 
@@ -631,11 +637,33 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 		kfree(utf16_path);
 		return -ENOENT;
 	}
+
+	if (le32_to_cpu(err_buf->ByteCount) < sizeof(struct smb2_symlink_err_rsp) ||
+	    get_rfc1002_length(err_buf) + 4 < SMB2_SYMLINK_STRUCT_SIZE) {
+		kfree(utf16_path);
+		return -ENOENT;
+	}
+
 	/* open must fail on symlink - reset rc */
 	rc = 0;
 	symlink = (struct smb2_symlink_err_rsp *)err_buf->ErrorData;
 	sub_len = le16_to_cpu(symlink->SubstituteNameLength);
 	sub_offset = le16_to_cpu(symlink->SubstituteNameOffset);
+	print_len = le16_to_cpu(symlink->PrintNameLength);
+	print_offset = le16_to_cpu(symlink->PrintNameOffset);
+
+	if (get_rfc1002_length(err_buf) + 4 <
+			SMB2_SYMLINK_STRUCT_SIZE + sub_offset + sub_len) {
+		kfree(utf16_path);
+		return -ENOENT;
+	}
+
+	if (get_rfc1002_length(err_buf) + 4 <
+			SMB2_SYMLINK_STRUCT_SIZE + print_offset + print_len) {
+		kfree(utf16_path);
+		return -ENOENT;
+	}
+
 	*target_path = cifs_strndup_from_utf16(
 				(char *)symlink->PathBuffer + sub_offset,
 				sub_len, true, cifs_sb->local_nls);
-- 
2.9.3

[patch added to 3.12-stable] random: properly align get_random_int_hash

[Jiri Slaby]

From: Eric Biggers <ebiggers3@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b1132deac01c2332d234fa821a70022796b79182 upstream.

get_random_long() reads from the get_random_int_hash array using an
unsigned long pointer.  For this code to be guaranteed correct on all
architectures, the array must be aligned to an unsigned long boundary.

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/char/random.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index f6b25db16791..85e771c26488 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1465,13 +1465,15 @@ int random_int_secret_init(void)
 	return 0;
 }
 
+static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
+		__aligned(sizeof(unsigned long));
+
 /*
  * Get a random word for internal kernel use only. Similar to urandom but
  * with the goal of minimal entropy pool depletion. As a result, the random
  * value is not cryptographically secure but for several uses the cost of
  * depleting entropy is too high
  */
-static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
 unsigned int get_random_int(void)
 {
 	__u32 *hash;
-- 
2.9.3

Re: [patch added to 3.12-stable] random: properly align get_random_int_hash

[Eric Biggers]

get_random_long() was added in v4.5 and doesn't appear to have been backported
to any stable branches, so my patch doesn't actually need to be backported to
anything older than v4.5.  It won't break anything, though.

On Thu, Aug 18, 2016 at 02:49:45PM +0200, Jiri Slaby wrote:
> From: Eric Biggers <ebiggers3@gmail.com>
> 
> This patch has been added to the 3.12 stable tree. If you have any
> objections, please let us know.
> 
> ===============
> 
> commit b1132deac01c2332d234fa821a70022796b79182 upstream.
> 
> get_random_long() reads from the get_random_int_hash array using an
> unsigned long pointer.  For this code to be guaranteed correct on all
> architectures, the array must be aligned to an unsigned long boundary.
> 
> Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
>  drivers/char/random.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/char/random.c b/drivers/char/random.c
> index f6b25db16791..85e771c26488 100644
> --- a/drivers/char/random.c
> +++ b/drivers/char/random.c
> @@ -1465,13 +1465,15 @@ int random_int_secret_init(void)
>  	return 0;
>  }
>  
> +static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
> +		__aligned(sizeof(unsigned long));
> +
>  /*
>   * Get a random word for internal kernel use only. Similar to urandom but
>   * with the goal of minimal entropy pool depletion. As a result, the random
>   * value is not cryptographically secure but for several uses the cost of
>   * depleting entropy is too high
>   */
> -static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
>  unsigned int get_random_int(void)
>  {
>  	__u32 *hash;
> -- 
> 2.9.3
> 

Re: [patch added to 3.12-stable] random: properly align get_random_int_hash

[Jiri Slaby]

On 08/19/2016, 05:14 AM, Eric Biggers wrote:
> get_random_long() was added in v4.5 and doesn't appear to have been backported
> to any stable branches, so my patch doesn't actually need to be backported to
> anything older than v4.5.  It won't break anything, though.

Oh, thanks. In that case I will leave it in place for the case anybody
backports get_random_long in the future.

-- 
js
suse labs

[patch added to 3.12-stable] nfs: don't create zero-length requests

[Jiri Slaby]

From: Benjamin Coddington <bcodding@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 149a4fddd0a72d526abbeac0c8deaab03559836a upstream.

NFS doesn't expect requests with wb_bytes set to zero and may make
unexpected decisions about how to handle that request at the page IO layer.
Skip request creation if we won't have any wb_bytes in the request.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/nfs/write.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 3a1b1d1a27ce..d194a72b5b66 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -967,6 +967,9 @@ int nfs_updatepage(struct file *file, struct page *page,
 		file->f_path.dentry->d_name.name, count,
 		(long long)(page_file_offset(page) + offset));
 
+	if (!count)
+		goto out;
+
 	if (nfs_can_extend_write(file, page, inode)) {
 		count = max(count + offset, nfs_page_length(page));
 		offset = 0;
@@ -977,7 +980,7 @@ int nfs_updatepage(struct file *file, struct page *page,
 		nfs_set_pageerror(page);
 	else
 		__set_page_dirty_nobuffers(page);
-
+out:
 	dprintk("NFS:       nfs_updatepage returns %d (isize %lld)\n",
 			status, (long long)i_size_read(inode));
 	return status;
-- 
2.9.3