[PATCH 4.4 00/21] 4.4.25-stable review

[PATCH 4.4 00/21] 4.4.25-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.25 release.
There are 21 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Oct 16 11:40:11 UTC 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.25-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.25-rc1

Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
    tpm_crb: fix crb_req_canceled behavior

Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
    tpm: fix a race condition in tpm2_unseal_trusted()

Miklos Szeredi <mszeredi@redhat.com>
    ima: use file_dentry()

Christophe Jaillet <christophe.jaillet@wanadoo.fr>
    ARM: cpuidle: Fix error return code

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs

Grzegorz Jaszczyk <jaz@semihalf.com>
    ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

Josh Poimboeuf <jpoimboe@redhat.com>
    x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

Mika Westerberg <mika.westerberg@linux.intel.com>
    x86/irq: Prevent force migration of irqs which are not in the vector domain

Dan Williams <dan.j.williams@intel.com>
    x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

Dan Carpenter <dan.carpenter@oracle.com>
    KVM: PPC: BookE: Fix a sanity check

James Hogan <james.hogan@imgtec.com>
    KVM: MIPS: Drop other CPU ASIDs on guest MMU changes

Thomas Huth <thuth@redhat.com>
    KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

Dan Carpenter <dan.carpenter@oracle.com>
    mfd: 88pm80x: Double shifting bug in suspend/resume

Boris Brezillon <boris.brezillon@free-electrons.com>
    mfd: atmel-hlcdc: Do not sleep in atomic context

Lu Baolu <baolu.lu@linux.intel.com>
    mfd: rtsx_usb: Avoid setting ucr->current_sg.status

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

Anssi Hannula <anssi.hannula@iki.fi>
    ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

Takashi Iwai <tiwai@suse.de>
    ALSA: ali5451: Fix out-of-bound position reporting

John Stultz <john.stultz@linaro.org>
    timekeeping: Fix __ktime_get_fast_ns() regression

Christopher S. Hall <christopher.s.hall@intel.com>
    time: Add cycles to nanoseconds translation


-------------

Diffstat:

 Makefile                              |   4 +-
 arch/arm/boot/dts/armada-390.dtsi     |   3 +
 arch/arm/boot/dts/qcom-apq8064.dtsi   |  76 ++++++++++++++++++-------
 arch/mips/kvm/emulate.c               |  63 +++++++++++++++++----
 arch/powerpc/include/asm/reg.h        |   1 +
 arch/powerpc/kvm/book3s_emulate.c     |   2 +
 arch/powerpc/kvm/booke.c              |   2 +-
 arch/x86/kernel/apic/vector.c         |  23 +++++++-
 arch/x86/kernel/e820.c                |  14 ++---
 arch/x86/kernel/ptrace.c              |   4 +-
 drivers/char/tpm/tpm-dev.c            |   2 +-
 drivers/char/tpm/tpm-interface.c      |  51 +++++++++--------
 drivers/char/tpm/tpm-sysfs.c          |   2 +-
 drivers/char/tpm/tpm.h                |  12 ++--
 drivers/char/tpm/tpm2-cmd.c           | 101 ++++++++++++++++++++++------------
 drivers/char/tpm/tpm_crb.c            |   7 ++-
 drivers/cpuidle/cpuidle-arm.c         |   1 +
 drivers/mfd/Kconfig                   |   1 +
 drivers/mfd/atmel-hlcdc.c             |   5 +-
 drivers/mfd/rtsx_usb.c                |  10 ++--
 include/linux/mfd/88pm80x.h           |   4 +-
 kernel/time/timekeeping.c             |  32 +++++++++--
 security/integrity/ima/ima_api.c      |   2 +-
 security/integrity/ima/ima_appraise.c |   4 +-
 sound/pci/ali5451/ali5451.c           |   2 +
 sound/usb/line6/driver.c              |   2 +-
 sound/usb/mixer_quirks.c              |  22 ++++++--
 27 files changed, 314 insertions(+), 138 deletions(-)

[PATCH 4.4 01/21] time: Add cycles to nanoseconds translation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher S. Hall <christopher.s.hall@intel.com>

commit 6bd58f09e1d8cc6c50a824c00bf0d617919986a1 upstream.

The timekeeping code does not currently provide a way to translate
externally provided clocksource cycles to system time. The cycle count
is always provided by the result clocksource read() method internal to
the timekeeping code. The added function timekeeping_cycles_to_ns()
calculated a nanosecond value from a cycle count that can be added to
tk_read_base.base value yielding the current system time. This allows
clocksource cycle values external to the timekeeping code to provide a
cycle count that can be transformed to system time.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -298,17 +298,34 @@ u32 (*arch_gettimeoffset)(void) = defaul
 static inline u32 arch_gettimeoffset(void) { return 0; }
 #endif
 
+static inline s64 timekeeping_delta_to_ns(struct tk_read_base *tkr,
+					  cycle_t delta)
+{
+	s64 nsec;
+
+	nsec = delta * tkr->mult + tkr->xtime_nsec;
+	nsec >>= tkr->shift;
+
+	/* If arch requires, add in get_arch_timeoffset() */
+	return nsec + arch_gettimeoffset();
+}
+
 static inline s64 timekeeping_get_ns(struct tk_read_base *tkr)
 {
 	cycle_t delta;
-	s64 nsec;
 
 	delta = timekeeping_get_delta(tkr);
+	return timekeeping_delta_to_ns(tkr, delta);
+}
 
-	nsec = (delta * tkr->mult + tkr->xtime_nsec) >> tkr->shift;
+static inline s64 timekeeping_cycles_to_ns(struct tk_read_base *tkr,
+					    cycle_t cycles)
+{
+	cycle_t delta;
 
-	/* If arch requires, add in get_arch_timeoffset() */
-	return nsec + arch_gettimeoffset();
+	/* calculate the delta since the last update_wall_time */
+	delta = clocksource_delta(cycles, tkr->cycle_last, tkr->mask);
+	return timekeeping_delta_to_ns(tkr, delta);
 }
 
 /**

[PATCH 4.4 02/21] timekeeping: Fix __ktime_get_fast_ns() regression

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 58bfea9532552d422bde7afa207e1a0f08dffa7d upstream.

In commit 27727df240c7 ("Avoid taking lock in NMI path with
CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code
the timekeeping_get_ns() function, but I forgot to include
the unit conversion from cycles to nanoseconds, breaking the
function's output, which impacts users like perf.

This results in bogus perf timestamps like:
 swapper     0 [000]   253.427536:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426573:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426687:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426800:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426905:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427022:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427127:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427239:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427346:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427463:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   255.426572:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:
 swapper     0 [000]    39.953768:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.064839:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.175956:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.287103:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.398217:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.509324:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.620437:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.731546:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.842654:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.953772:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    41.064881:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert
the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after
the v4.8 release. Unfortunately the problematic commit has
landed in some -stable trees so they'll need this fix as
well.

Many apologies for this mistake. I'll be looking to add a
perf-clock sanity test to the kselftest timers tests soon.

Fixes: 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Reported-by: Brendan Gregg <bgregg@netflix.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-and-reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -402,8 +402,11 @@ static __always_inline u64 __ktime_get_f
 		tkr = tkf->base + (seq & 0x01);
 		now = ktime_to_ns(tkr->base);
 
-		now += clocksource_delta(tkr->read(tkr->clock),
-					 tkr->cycle_last, tkr->mask);
+		now += timekeeping_delta_to_ns(tkr,
+				clocksource_delta(
+					tkr->read(tkr->clock),
+					tkr->cycle_last,
+					tkr->mask));
 	} while (read_seqcount_retry(&tkf->seq, seq));
 
 	return now;

[PATCH 4.4 03/21] ALSA: ali5451: Fix out-of-bound position reporting

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
  snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.

Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/ali5451/ali5451.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -1408,6 +1408,7 @@ snd_ali_playback_pointer(struct snd_pcm_
 	spin_unlock(&codec->reg_lock);
 	dev_dbg(codec->card->dev, "playback pointer returned cso=%xh.\n", cso);
 
+	cso %= runtime->buffer_size;
 	return cso;
 }
 
@@ -1428,6 +1429,7 @@ static snd_pcm_uframes_t snd_ali_pointer
 	cso = inw(ALI_REG(codec, ALI_CSO_ALPHA_FMS + 2));
 	spin_unlock(&codec->reg_lock);
 
+	cso %= runtime->buffer_size;
 	return cso;
 }
 

[PATCH 4.4 04/21] ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <anssi.hannula@iki.fi>

commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.

The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: David W <regulars@d-dub.org.uk>
Tested-by: David W <regulars@d-dub.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer_quirks.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1831,6 +1831,7 @@ void snd_usb_mixer_rc_memory_change(stru
 }
 
 static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+					 struct usb_mixer_elem_info *cval,
 					 struct snd_kcontrol *kctl)
 {
 	/* Approximation using 10 ranges based on output measurement on hw v1.2.
@@ -1848,10 +1849,19 @@ static void snd_dragonfly_quirk_db_scale
 		41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
 	);
 
-	usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
-	kctl->tlv.p = scale;
-	kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
-	kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+	if (cval->min == 0 && cval->max == 50) {
+		usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk (0-50 variant)\n");
+		kctl->tlv.p = scale;
+		kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+		kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+
+	} else if (cval->min == 0 && cval->max <= 1000) {
+		/* Some other clearly broken DragonFly variant.
+		 * At least a 0..53 variant (hw v1.0) exists.
+		 */
+		usb_audio_info(mixer->chip, "ignoring too narrow dB range on a DragonFly device");
+		kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+	}
 }
 
 void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
@@ -1860,8 +1870,8 @@ void snd_usb_mixer_fu_apply_quirk(struct
 {
 	switch (mixer->chip->usb_id) {
 	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
-		if (unitid == 7 && cval->min == 0 && cval->max == 50)
-			snd_dragonfly_quirk_db_scale(mixer, kctl);
+		if (unitid == 7 && cval->control == UAC_FU_VOLUME)
+			snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
 		break;
 	}
 }

[PATCH 4.4 05/21] ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 8da08ca03b73593d5299893bf29fc08569c3fb5f upstream.

Currently, usb-line6 module exports an array of MIDI manufacturer ID and
usb-pod module uses it. However, the declaration is not the definition in
common header. The difference is explicit length of array. Although
compiler calculates it and everything goes well, it's better to use the
same representation between definition and declaration.

This commit fills the length of array for usb-line6 module. As a small
good sub-effect, this commit suppress below warnings from static analysis
by sparse v0.5.0.

sound/usb/line6/driver.c:274:43: error: cannot size expression
sound/usb/line6/driver.c:275:16: error: cannot size expression
sound/usb/line6/driver.c:276:16: error: cannot size expression
sound/usb/line6/driver.c:277:16: error: cannot size expression

Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/line6/driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -29,7 +29,7 @@
 /*
 	This is Line 6's MIDI manufacturer ID.
 */
-const unsigned char line6_midi_id[] = {
+const unsigned char line6_midi_id[3] = {
 	0x00, 0x01, 0x0c
 };
 EXPORT_SYMBOL_GPL(line6_midi_id);

[PATCH 4.4 06/21] mfd: rtsx_usb: Avoid setting ucr->current_sg.status

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lu Baolu <baolu.lu@linux.intel.com>

commit 8dcc5ff8fcaf778bb57ab4448fedca9e381d088f upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/rtsx_usb.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -46,9 +46,6 @@ static void rtsx_usb_sg_timed_out(unsign
 
 	dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
 	usb_sg_cancel(&ucr->current_sg);
-
-	/* we know the cancellation is caused by time-out */
-	ucr->current_sg.status = -ETIMEDOUT;
 }
 
 static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
@@ -67,12 +64,15 @@ static int rtsx_usb_bulk_transfer_sglist
 	ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
 	add_timer(&ucr->sg_timer);
 	usb_sg_wait(&ucr->current_sg);
-	del_timer_sync(&ucr->sg_timer);
+	if (!del_timer_sync(&ucr->sg_timer))
+		ret = -ETIMEDOUT;
+	else
+		ret = ucr->current_sg.status;
 
 	if (act_len)
 		*act_len = ucr->current_sg.bytes;
 
-	return ucr->current_sg.status;
+	return ret;
 }
 
 int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,

[PATCH 4.4 07/21] mfd: atmel-hlcdc: Do not sleep in atomic context

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <boris.brezillon@free-electrons.com>

commit 2c2469bc03d569c49119db2cccb5cb3f0c6a5b33 upstream.

readl_poll_timeout() calls usleep_range(), but
regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap
spinlock held).

Replace the readl_poll_timeout() call by readl_poll_timeout_atomic().

Fixes: ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/atmel-hlcdc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/mfd/atmel-hlcdc.c
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -50,8 +50,9 @@ static int regmap_atmel_hlcdc_reg_write(
 	if (reg <= ATMEL_HLCDC_DIS) {
 		u32 status;
 
-		readl_poll_timeout(hregmap->regs + ATMEL_HLCDC_SR, status,
-				   !(status & ATMEL_HLCDC_SIP), 1, 100);
+		readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
+					  status, !(status & ATMEL_HLCDC_SIP),
+					  1, 100);
 	}
 
 	writel(val, hregmap->regs + reg);

[PATCH 4.4 08/21] mfd: 88pm80x: Double shifting bug in suspend/resume

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 9a6dc644512fd083400a96ac4a035ac154fe6b8d upstream.

set_bit() and clear_bit() take the bit number so this code is really
doing "1 << (1 << irq)" which is a double shift bug.  It's done
consistently so it won't cause a problem unless "irq" is more than 4.

Fixes: 70c6cce04066 ('mfd: Support 88pm80x in 80x driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mfd/88pm80x.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -350,7 +350,7 @@ static inline int pm80x_dev_suspend(stru
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		set_bit((1 << irq), &chip->wu_flag);
+		set_bit(irq, &chip->wu_flag);
 
 	return 0;
 }
@@ -362,7 +362,7 @@ static inline int pm80x_dev_resume(struc
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		clear_bit((1 << irq), &chip->wu_flag);
+		clear_bit(irq, &chip->wu_flag);
 
 	return 0;
 }

[PATCH 4.4 10/21] KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Huth <thuth@redhat.com>

commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/reg.h    |    1 +
 arch/powerpc/kvm/book3s_emulate.c |    2 ++
 2 files changed, 3 insertions(+)

--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -708,6 +708,7 @@
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
 #define SPRN_MMCR2	785
+#define SPRN_UMMCR2	769
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -498,6 +498,7 @@ int kvmppc_core_emulate_mtspr_pr(struct
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 #endif
 		break;
 unprivileged:
@@ -640,6 +641,7 @@ int kvmppc_core_emulate_mfspr_pr(struct
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 	case SPRN_TIR:
 #endif
 		*spr_val = 0;

[PATCH 4.4 12/21] KVM: PPC: BookE: Fix a sanity check

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ac0e89bb4744d3882ccd275f2416d9ce22f4e1e7 upstream.

We use logical negate where bitwise negate was intended.  It means that
we never return -EINVAL here.

Fixes: ce11e48b7fdd ('KVM: PPC: E500: Add userspace debug stub support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/booke.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -2033,7 +2033,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(
 		if (type == KVMPPC_DEBUG_NONE)
 			continue;
 
-		if (type & !(KVMPPC_DEBUG_WATCH_READ |
+		if (type & ~(KVMPPC_DEBUG_WATCH_READ |
 			     KVMPPC_DEBUG_WATCH_WRITE |
 			     KVMPPC_DEBUG_BREAKPOINT))
 			return -EINVAL;

[PATCH 4.4 13/21] x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 917db484dc6a69969d317b3e57add4208a8d9d42 upstream.

In commit:

  ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")

Christoph references the original patch I wrote implementing pmem support.
The intent of the 'max_pfn' changes in that commit were to enable persistent
memory ranges to be covered by the struct page memmap by default.

However, that approach was abandoned when Christoph ported the patches [1], and
that functionality has since been replaced by devm_memremap_pages().

In the meantime, this max_pfn manipulation is confusing kdump [2] that
assumes that everything covered by the max_pfn is "System RAM".  This
results in kdump hanging or crashing.

 [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html
 [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098

So fix it.

Reported-by: Zhang Yi <yizhan@redhat.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-nvdimm@lists.01.org
Fixes: ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")
Link: http://lkml.kernel.org/r/147448744538.34910.11287693517367139607.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/e820.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -347,7 +347,7 @@ int __init sanitize_e820_map(struct e820
 		 * continue building up new bios map based on this
 		 * information
 		 */
-		if (current_type != last_type || current_type == E820_PRAM) {
+		if (current_type != last_type) {
 			if (last_type != 0)	 {
 				new_bios[new_bios_entry].size =
 					change_point[chgidx]->addr - last_addr;
@@ -753,7 +753,7 @@ u64 __init early_reserve_e820(u64 size,
 /*
  * Find the highest page frame number we have available
  */
-static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
 {
 	int i;
 	unsigned long last_pfn = 0;
@@ -764,11 +764,7 @@ static unsigned long __init e820_end_pfn
 		unsigned long start_pfn;
 		unsigned long end_pfn;
 
-		/*
-		 * Persistent memory is accounted as ram for purposes of
-		 * establishing max_pfn and mem_map.
-		 */
-		if (ei->type != E820_RAM && ei->type != E820_PRAM)
+		if (ei->type != type)
 			continue;
 
 		start_pfn = ei->addr >> PAGE_SHIFT;
@@ -793,12 +789,12 @@ static unsigned long __init e820_end_pfn
 }
 unsigned long __init e820_end_of_ram_pfn(void)
 {
-	return e820_end_pfn(MAX_ARCH_PFN);
+	return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
 }
 
 unsigned long __init e820_end_of_low_ram_pfn(void)
 {
-	return e820_end_pfn(1UL << (32-PAGE_SHIFT));
+	return e820_end_pfn(1UL << (32 - PAGE_SHIFT), E820_RAM);
 }
 
 static void early_panic(char *msg)

[PATCH 4.4 14/21] x86/irq: Prevent force migration of irqs which are not in the vector domain

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit db91aa793ff984ac048e199ea1c54202543952fe upstream.

When a CPU is about to be offlined we call fixup_irqs() that resets IRQ
affinities related to the CPU in question. The same thing is also done when
the system is suspended to S-states like S3 (mem).

For each IRQ we try to complete any on-going move regardless whether the
IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch
its chip_data, assume it is of type struct apic_chip_data and manipulate it
by clearing old_domain mask etc. For irq_chips that are not part of the
x86_vector_domain, like those created by various GPIO drivers, will find
their chip_data being changed unexpectly.

Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets
corrupted after resume:

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  hi

  # rtcwake -s10 -mmem
  <10 seconds passes>

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  ?

Note '?' in the output. It means the struct gpio_chip ->get function is
NULL whereas before suspend it was there.

Fix this by first checking that the IRQ belongs to x86_vector_domain before
we try to use the chip_data as struct apic_chip_data.

Reported-and-tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/apic/vector.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -659,11 +659,28 @@ void irq_complete_move(struct irq_cfg *c
  */
 void irq_force_complete_move(struct irq_desc *desc)
 {
-	struct irq_data *irqdata = irq_desc_get_irq_data(desc);
-	struct apic_chip_data *data = apic_chip_data(irqdata);
-	struct irq_cfg *cfg = data ? &data->cfg : NULL;
+	struct irq_data *irqdata;
+	struct apic_chip_data *data;
+	struct irq_cfg *cfg;
 	unsigned int cpu;
 
+	/*
+	 * The function is called for all descriptors regardless of which
+	 * irqdomain they belong to. For example if an IRQ is provided by
+	 * an irq_chip as part of a GPIO driver, the chip data for that
+	 * descriptor is specific to the irq_chip in question.
+	 *
+	 * Check first that the chip_data is what we expect
+	 * (apic_chip_data) before touching it any further.
+	 */
+	irqdata = irq_domain_get_irq_data(x86_vector_domain,
+					  irq_desc_get_irq(desc));
+	if (!irqdata)
+		return;
+
+	data = apic_chip_data(irqdata);
+	cfg = data ? &data->cfg : NULL;
+
 	if (!cfg)
 		return;
 

[PATCH 4.4 15/21] x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit 72b4f6a5e903b071f2a7c4eb1418cbe4eefdc344 upstream.

On x86_32, when an interrupt happens from kernel space, SS and SP aren't
pushed and the existing stack is used.  So pt_regs is effectively two
words shorter, and the previous stack pointer is normally the memory
after the shortened pt_regs, aka '&regs->sp'.

But in the rare case where the interrupt hits right after the stack
pointer has been changed to point to an empty stack, like for example
when call_on_stack() is used, the address immediately after the
shortened pt_regs is no longer on the stack.  In that case, instead of
'&regs->sp', the previous stack pointer should be retrieved from the
beginning of the current stack page.

kernel_stack_pointer() wants to do that, but it forgets to dereference
the pointer.  So instead of returning a pointer to the previous stack,
it returns a pointer to the beginning of the current stack.

Note that it's probably outside of kernel_stack_pointer()'s scope to be
switching stacks at all.  The x86_64 version of this function doesn't do
it, and it would be better for the caller to do it if necessary.  But
that's a patch for another day.  This just fixes the original intent.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0788aa6a23cb ("x86: Prepare removal of previous_esp from i386 thread_info structure")
Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/ptrace.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -188,8 +188,8 @@ unsigned long kernel_stack_pointer(struc
 		return sp;
 
 	prev_esp = (u32 *)(context);
-	if (prev_esp)
-		return (unsigned long)prev_esp;
+	if (*prev_esp)
+		return (unsigned long)*prev_esp;
 
 	return (unsigned long)regs;
 }

[PATCH 4.4 16/21] ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grzegorz Jaszczyk <jaz@semihalf.com>

commit 061492cfad9f11dbc32df741a7164f307b69b6e6 upstream.

The armada-390.dtsi was broken since the first patch which adds Device Tree
files for Armada 39x SoC was introduced.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes 538da83 ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

---
 arch/arm/boot/dts/armada-390.dtsi |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };

[PATCH 4.4 18/21] ARM: cpuidle: Fix error return code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Jaillet <christophe.jaillet@wanadoo.fr>

commit af48d7bc3756a0cd882d65bff14ab39746ba57fe upstream.

We know that 'ret = 0' because it has been tested a few lines above.
So, if 'kzalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: a0d46a3dfdc3 ("ARM: cpuidle: Register per cpuidle device")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpuidle/cpuidle-arm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/cpuidle/cpuidle-arm.c
+++ b/drivers/cpuidle/cpuidle-arm.c
@@ -135,6 +135,7 @@ static int __init arm_idle_init(void)
 		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 		if (!dev) {
 			pr_err("Failed to allocate cpuidle device\n");
+			ret = -ENOMEM;
 			goto out_fail;
 		}
 		dev->cpu = cpu;

[PATCH 4.4 19/21] ima: use file_dentry()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@redhat.com>

commit e71b9dff0634edb127f449e076e883ef24a8c76c upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.

Reported-by: Krisztian Litkey <kli@iki.fi>
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_api.c      |    2 +-
 security/integrity/ima/ima_appraise.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -202,7 +202,7 @@ int ima_collect_measurement(struct integ
 	} hash;
 
 	if (xattr_value)
-		*xattr_len = ima_read_xattr(file->f_path.dentry, xattr_value);
+		*xattr_len = ima_read_xattr(file_dentry(file), xattr_value);
 
 	if (!(iint->flags & IMA_COLLECTED)) {
 		u64 i_version = file_inode(file)->i_version;
--- a/security/integrity/ima/ima_appraise.c
+++ b/security/integrity/ima/ima_appraise.c
@@ -189,7 +189,7 @@ int ima_appraise_measurement(int func, s
 {
 	static const char op[] = "appraise_data";
 	char *cause = "unknown";
-	struct dentry *dentry = file->f_path.dentry;
+	struct dentry *dentry = file_dentry(file);
 	struct inode *inode = d_backing_inode(dentry);
 	enum integrity_status status = INTEGRITY_UNKNOWN;
 	int rc = xattr_len, hash_start = 0;
@@ -289,7 +289,7 @@ out:
  */
 void ima_update_xattr(struct integrity_iint_cache *iint, struct file *file)
 {
-	struct dentry *dentry = file->f_path.dentry;
+	struct dentry *dentry = file_dentry(file);
 	int rc = 0;
 
 	/* do not collect and update hash for digital signatures */

[PATCH 4.4 20/21] tpm: fix a race condition in tpm2_unseal_trusted()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

commit d4816edfe706497a8525480c1685ceb9871bc118 upstream.

Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.

Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm-dev.c       |    2 
 drivers/char/tpm/tpm-interface.c |   51 ++++++++++---------
 drivers/char/tpm/tpm-sysfs.c     |    2 
 drivers/char/tpm/tpm.h           |   12 +++-
 drivers/char/tpm/tpm2-cmd.c      |  101 +++++++++++++++++++++++++--------------
 5 files changed, 103 insertions(+), 65 deletions(-)

--- a/drivers/char/tpm/tpm-dev.c
+++ b/drivers/char/tpm/tpm-dev.c
@@ -139,7 +139,7 @@ static ssize_t tpm_write(struct file *fi
 
 	/* atomic tpm command send and result receive */
 	out_size = tpm_transmit(priv->chip, priv->data_buffer,
-				sizeof(priv->data_buffer));
+				sizeof(priv->data_buffer), 0);
 	if (out_size < 0) {
 		mutex_unlock(&priv->buffer_mutex);
 		return out_size;
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -328,8 +328,8 @@ EXPORT_SYMBOL_GPL(tpm_calc_ordinal_durat
 /*
  * Internal kernel interface to transmit TPM commands
  */
-ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
-		     size_t bufsiz)
+ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
+		     unsigned int flags)
 {
 	ssize_t rc;
 	u32 count, ordinal;
@@ -348,7 +348,8 @@ ssize_t tpm_transmit(struct tpm_chip *ch
 		return -E2BIG;
 	}
 
-	mutex_lock(&chip->tpm_mutex);
+	if (!(flags & TPM_TRANSMIT_UNLOCKED))
+		mutex_lock(&chip->tpm_mutex);
 
 	rc = chip->ops->send(chip, (u8 *) buf, count);
 	if (rc < 0) {
@@ -391,20 +392,21 @@ out_recv:
 		dev_err(chip->pdev,
 			"tpm_transmit: tpm_recv: error %zd\n", rc);
 out:
-	mutex_unlock(&chip->tpm_mutex);
+	if (!(flags & TPM_TRANSMIT_UNLOCKED))
+		mutex_unlock(&chip->tpm_mutex);
 	return rc;
 }
 
 #define TPM_DIGEST_SIZE 20
 #define TPM_RET_CODE_IDX 6
 
-ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd,
-			 int len, const char *desc)
+ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd,
+			 int len, unsigned int flags, const char *desc)
 {
-	struct tpm_output_header *header;
+	const struct tpm_output_header *header;
 	int err;
 
-	len = tpm_transmit(chip, (u8 *) cmd, len);
+	len = tpm_transmit(chip, (const u8 *)cmd, len, flags);
 	if (len <  0)
 		return len;
 	else if (len < TPM_HEADER_SIZE)
@@ -452,7 +454,8 @@ ssize_t tpm_getcap(struct device *dev, _
 		tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
 		tpm_cmd.params.getcap_in.subcap = subcap_id;
 	}
-	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, desc);
+	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
+			      desc);
 	if (!rc)
 		*cap = tpm_cmd.params.getcap_out.cap;
 	return rc;
@@ -468,7 +471,7 @@ void tpm_gen_interrupt(struct tpm_chip *
 	tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
 	tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
 
-	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
+	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
 			      "attempting to determine the timeouts");
 }
 EXPORT_SYMBOL_GPL(tpm_gen_interrupt);
@@ -489,7 +492,7 @@ static int tpm_startup(struct tpm_chip *
 	start_cmd.header.in = tpm_startup_header;
 
 	start_cmd.params.startup_in.startup_type = startup_type;
-	return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE,
+	return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
 				"attempting to start the TPM");
 }
 
@@ -505,7 +508,8 @@ int tpm_get_timeouts(struct tpm_chip *ch
 	tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
 	tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
 	tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
-	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, NULL);
+	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
+			      NULL);
 
 	if (rc == TPM_ERR_INVALID_POSTINIT) {
 		/* The TPM is not started, we are the first to talk to it.
@@ -519,7 +523,7 @@ int tpm_get_timeouts(struct tpm_chip *ch
 		tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
 		tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
 		rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
-				  NULL);
+				      0, NULL);
 	}
 	if (rc) {
 		dev_err(chip->pdev,
@@ -580,7 +584,7 @@ duration:
 	tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
 	tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_DURATION;
 
-	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
+	rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
 			      "attempting to determine the durations");
 	if (rc)
 		return rc;
@@ -636,7 +640,7 @@ static int tpm_continue_selftest(struct
 	struct tpm_cmd_t cmd;
 
 	cmd.header.in = continue_selftest_header;
-	rc = tpm_transmit_cmd(chip, &cmd, CONTINUE_SELFTEST_RESULT_SIZE,
+	rc = tpm_transmit_cmd(chip, &cmd, CONTINUE_SELFTEST_RESULT_SIZE, 0,
 			      "continue selftest");
 	return rc;
 }
@@ -656,7 +660,7 @@ int tpm_pcr_read_dev(struct tpm_chip *ch
 
 	cmd.header.in = pcrread_header;
 	cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx);
-	rc = tpm_transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE,
+	rc = tpm_transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE, 0,
 			      "attempting to read a pcr value");
 
 	if (rc == 0)
@@ -754,7 +758,7 @@ int tpm_pcr_extend(u32 chip_num, int pcr
 	cmd.header.in = pcrextend_header;
 	cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx);
 	memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE);
-	rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
+	rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
 			      "attempting extend a PCR value");
 
 	tpm_chip_put(chip);
@@ -793,7 +797,7 @@ int tpm_do_selftest(struct tpm_chip *chi
 		/* Attempt to read a PCR value */
 		cmd.header.in = pcrread_header;
 		cmd.params.pcrread_in.pcr_idx = cpu_to_be32(0);
-		rc = tpm_transmit(chip, (u8 *) &cmd, READ_PCR_RESULT_SIZE);
+		rc = tpm_transmit(chip, (u8 *) &cmd, READ_PCR_RESULT_SIZE, 0);
 		/* Some buggy TPMs will not respond to tpm_tis_ready() for
 		 * around 300ms while the self test is ongoing, keep trying
 		 * until the self test duration expires. */
@@ -834,7 +838,7 @@ int tpm_send(u32 chip_num, void *cmd, si
 	if (chip == NULL)
 		return -ENODEV;
 
-	rc = tpm_transmit_cmd(chip, cmd, buflen, "attempting tpm_cmd");
+	rc = tpm_transmit_cmd(chip, cmd, buflen, 0, "attempting tpm_cmd");
 
 	tpm_chip_put(chip);
 	return rc;
@@ -936,14 +940,15 @@ int tpm_pm_suspend(struct device *dev)
 		cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(tpm_suspend_pcr);
 		memcpy(cmd.params.pcrextend_in.hash, dummy_hash,
 		       TPM_DIGEST_SIZE);
-		rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
+		rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
 				      "extending dummy pcr before suspend");
 	}
 
 	/* now do the actual savestate */
 	for (try = 0; try < TPM_RETRY; try++) {
 		cmd.header.in = savestate_header;
-		rc = tpm_transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, NULL);
+		rc = tpm_transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, 0,
+				      NULL);
 
 		/*
 		 * If the TPM indicates that it is too busy to respond to
@@ -1027,8 +1032,8 @@ int tpm_get_random(u32 chip_num, u8 *out
 		tpm_cmd.params.getrandom_in.num_bytes = cpu_to_be32(num_bytes);
 
 		err = tpm_transmit_cmd(chip, &tpm_cmd,
-				   TPM_GETRANDOM_RESULT_SIZE + num_bytes,
-				   "attempting get random");
+				       TPM_GETRANDOM_RESULT_SIZE + num_bytes,
+				       0, "attempting get random");
 		if (err)
 			break;
 
--- a/drivers/char/tpm/tpm-sysfs.c
+++ b/drivers/char/tpm/tpm-sysfs.c
@@ -39,7 +39,7 @@ static ssize_t pubek_show(struct device
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 
 	tpm_cmd.header.in = tpm_readpubek_header;
-	err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE,
+	err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE, 0,
 			       "attempting to read the PUBEK");
 	if (err)
 		goto out;
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -498,11 +498,15 @@ extern struct class *tpm_class;
 extern dev_t tpm_devt;
 extern const struct file_operations tpm_fops;
 
+enum tpm_transmit_flags {
+	TPM_TRANSMIT_UNLOCKED	= BIT(0),
+};
+
+ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
+		     unsigned int flags);
+ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd, int len,
+			 unsigned int flags, const char *desc);
 ssize_t	tpm_getcap(struct device *, __be32, cap_t *, const char *);
-ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
-		     size_t bufsiz);
-ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd, int len,
-			 const char *desc);
 extern int tpm_get_timeouts(struct tpm_chip *);
 extern void tpm_gen_interrupt(struct tpm_chip *);
 extern int tpm_do_selftest(struct tpm_chip *);
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -264,7 +264,7 @@ int tpm2_pcr_read(struct tpm_chip *chip,
 	       sizeof(cmd.params.pcrread_in.pcr_select));
 	cmd.params.pcrread_in.pcr_select[pcr_idx >> 3] = 1 << (pcr_idx & 0x7);
 
-	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
 			      "attempting to read a pcr value");
 	if (rc == 0) {
 		buf = cmd.params.pcrread_out.digest;
@@ -312,7 +312,7 @@ int tpm2_pcr_extend(struct tpm_chip *chi
 	cmd.params.pcrextend_in.hash_alg = cpu_to_be16(TPM2_ALG_SHA1);
 	memcpy(cmd.params.pcrextend_in.digest, hash, TPM_DIGEST_SIZE);
 
-	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
 			      "attempting extend a PCR value");
 
 	return rc;
@@ -358,7 +358,7 @@ int tpm2_get_random(struct tpm_chip *chi
 		cmd.header.in = tpm2_getrandom_header;
 		cmd.params.getrandom_in.size = cpu_to_be16(num_bytes);
 
-		err = tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+		err = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
 				       "attempting get random");
 		if (err)
 			break;
@@ -416,12 +416,12 @@ static void tpm2_buf_append_auth(struct
 }
 
 /**
- * tpm2_seal_trusted() - seal a trusted key
- * @chip_num: A specific chip number for the request or TPM_ANY_NUM
- * @options: authentication values and other options
+ * tpm2_seal_trusted() - seal the payload of a trusted key
+ * @chip_num: TPM chip to use
  * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
  *
- * Returns < 0 on error and 0 on success.
+ * Return: < 0 on error and 0 on success.
  */
 int tpm2_seal_trusted(struct tpm_chip *chip,
 		      struct trusted_key_payload *payload,
@@ -472,7 +472,7 @@ int tpm2_seal_trusted(struct tpm_chip *c
 		goto out;
 	}
 
-	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "sealing data");
+	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, 0, "sealing data");
 	if (rc)
 		goto out;
 
@@ -494,10 +494,18 @@ out:
 	return rc;
 }
 
-static int tpm2_load(struct tpm_chip *chip,
-		     struct trusted_key_payload *payload,
-		     struct trusted_key_options *options,
-		     u32 *blob_handle)
+/**
+ * tpm2_load_cmd() - execute a TPM2_Load command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static int tpm2_load_cmd(struct tpm_chip *chip,
+			 struct trusted_key_payload *payload,
+			 struct trusted_key_options *options,
+			 u32 *blob_handle, unsigned int flags)
 {
 	struct tpm_buf buf;
 	unsigned int private_len;
@@ -532,7 +540,7 @@ static int tpm2_load(struct tpm_chip *ch
 		goto out;
 	}
 
-	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "loading blob");
+	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags, "loading blob");
 	if (!rc)
 		*blob_handle = be32_to_cpup(
 			(__be32 *) &buf.data[TPM_HEADER_SIZE]);
@@ -546,7 +554,16 @@ out:
 	return rc;
 }
 
-static void tpm2_flush_context(struct tpm_chip *chip, u32 handle)
+/**
+ * tpm2_flush_context_cmd() - execute a TPM2_FlushContext command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static void tpm2_flush_context_cmd(struct tpm_chip *chip, u32 handle,
+				   unsigned int flags)
 {
 	struct tpm_buf buf;
 	int rc;
@@ -560,7 +577,8 @@ static void tpm2_flush_context(struct tp
 
 	tpm_buf_append_u32(&buf, handle);
 
-	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "flushing context");
+	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags,
+			      "flushing context");
 	if (rc)
 		dev_warn(chip->pdev, "0x%08x was not flushed, rc=%d\n", handle,
 			 rc);
@@ -568,10 +586,18 @@ static void tpm2_flush_context(struct tp
 	tpm_buf_destroy(&buf);
 }
 
-static int tpm2_unseal(struct tpm_chip *chip,
-		       struct trusted_key_payload *payload,
-		       struct trusted_key_options *options,
-		       u32 blob_handle)
+/**
+ * tpm2_unseal_cmd() - execute a TPM2_Unload command
+ * @chip_num: TPM chip to use
+ * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
+ *
+ * Return: same as with tpm_transmit_cmd
+ */
+static int tpm2_unseal_cmd(struct tpm_chip *chip,
+			   struct trusted_key_payload *payload,
+			   struct trusted_key_options *options,
+			   u32 blob_handle, unsigned int flags)
 {
 	struct tpm_buf buf;
 	u16 data_len;
@@ -589,7 +615,7 @@ static int tpm2_unseal(struct tpm_chip *
 			     options->blobauth /* hmac */,
 			     TPM_DIGEST_SIZE);
 
-	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, "unsealing");
+	rc = tpm_transmit_cmd(chip, buf.data, PAGE_SIZE, flags, "unsealing");
 	if (rc > 0)
 		rc = -EPERM;
 
@@ -608,12 +634,12 @@ static int tpm2_unseal(struct tpm_chip *
 }
 
 /**
- * tpm_unseal_trusted() - unseal a trusted key
- * @chip_num: A specific chip number for the request or TPM_ANY_NUM
- * @options: authentication values and other options
+ * tpm_unseal_trusted() - unseal the payload of a trusted key
+ * @chip_num: TPM chip to use
  * @payload: the key data in clear and encrypted form
+ * @options: authentication values and other options
  *
- * Returns < 0 on error and 0 on success.
+ * Return: < 0 on error and 0 on success.
  */
 int tpm2_unseal_trusted(struct tpm_chip *chip,
 			struct trusted_key_payload *payload,
@@ -622,14 +648,17 @@ int tpm2_unseal_trusted(struct tpm_chip
 	u32 blob_handle;
 	int rc;
 
-	rc = tpm2_load(chip, payload, options, &blob_handle);
+	mutex_lock(&chip->tpm_mutex);
+	rc = tpm2_load_cmd(chip, payload, options, &blob_handle,
+			   TPM_TRANSMIT_UNLOCKED);
 	if (rc)
-		return rc;
-
-	rc = tpm2_unseal(chip, payload, options, blob_handle);
-
-	tpm2_flush_context(chip, blob_handle);
+		goto out;
 
+	rc = tpm2_unseal_cmd(chip, payload, options, blob_handle,
+			     TPM_TRANSMIT_UNLOCKED);
+	tpm2_flush_context_cmd(chip, blob_handle, TPM_TRANSMIT_UNLOCKED);
+out:
+	mutex_unlock(&chip->tpm_mutex);
 	return rc;
 }
 
@@ -655,7 +684,7 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip
 	cmd.params.get_tpm_pt_in.property_id = cpu_to_be32(property_id);
 	cmd.params.get_tpm_pt_in.property_cnt = cpu_to_be32(1);
 
-	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), desc);
+	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, desc);
 	if (!rc)
 		*value = be32_to_cpu(cmd.params.get_tpm_pt_out.value);
 
@@ -689,7 +718,7 @@ int tpm2_startup(struct tpm_chip *chip,
 	cmd.header.in = tpm2_startup_header;
 
 	cmd.params.startup_in.startup_type = cpu_to_be16(startup_type);
-	return tpm_transmit_cmd(chip, &cmd, sizeof(cmd),
+	return tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0,
 				"attempting to start the TPM");
 }
 EXPORT_SYMBOL_GPL(tpm2_startup);
@@ -718,7 +747,7 @@ void tpm2_shutdown(struct tpm_chip *chip
 	cmd.header.in = tpm2_shutdown_header;
 	cmd.params.startup_in.startup_type = cpu_to_be16(shutdown_type);
 
-	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), "stopping the TPM");
+	rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, "stopping the TPM");
 
 	/* In places where shutdown command is sent there's no much we can do
 	 * except print the error code on a system failure.
@@ -784,7 +813,7 @@ static int tpm2_start_selftest(struct tp
 	cmd.header.in = tpm2_selftest_header;
 	cmd.params.selftest_in.full_test = full;
 
-	rc = tpm_transmit_cmd(chip, &cmd, TPM2_SELF_TEST_IN_SIZE,
+	rc = tpm_transmit_cmd(chip, &cmd, TPM2_SELF_TEST_IN_SIZE, 0,
 			      "continue selftest");
 
 	/* At least some prototype chips seem to give RC_TESTING error
@@ -836,7 +865,7 @@ int tpm2_do_selftest(struct tpm_chip *ch
 		cmd.params.pcrread_in.pcr_select[1] = 0x00;
 		cmd.params.pcrread_in.pcr_select[2] = 0x00;
 
-		rc = tpm_transmit_cmd(chip, (u8 *) &cmd, sizeof(cmd), NULL);
+		rc = tpm_transmit_cmd(chip, &cmd, sizeof(cmd), 0, NULL);
 		if (rc < 0)
 			break;
 
@@ -885,7 +914,7 @@ int tpm2_probe(struct tpm_chip *chip)
 	cmd.params.get_tpm_pt_in.property_id = cpu_to_be32(0x100);
 	cmd.params.get_tpm_pt_in.property_cnt = cpu_to_be32(1);
 
-	rc = tpm_transmit(chip, (const char *) &cmd, sizeof(cmd));
+	rc = tpm_transmit(chip, (const u8 *)&cmd, sizeof(cmd), 0);
 	if (rc <  0)
 		return rc;
 	else if (rc < TPM_HEADER_SIZE)

[PATCH 4.4 21/21] tpm_crb: fix crb_req_canceled behavior

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

commit 72fd50e14e46dc0edf360631bdece87c2f066a97 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.

Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_crb.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -149,6 +149,11 @@ static int crb_send(struct tpm_chip *chi
 	struct crb_priv *priv = chip->vendor.priv;
 	int rc = 0;
 
+	/* Zero the cancel register so that the next command will not get
+	 * canceled.
+	 */
+	iowrite32(0, &priv->cca->cancel);
+
 	if (len > le32_to_cpu(ioread32(&priv->cca->cmd_size))) {
 		dev_err(&chip->dev,
 			"invalid command count value %x %zx\n",
@@ -182,8 +187,6 @@ static void crb_cancel(struct tpm_chip *
 
 	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
 		dev_err(&chip->dev, "ACPI Start failed\n");
-
-	iowrite32(0, &priv->cca->cancel);
 }
 
 static bool crb_req_canceled(struct tpm_chip *chip, u8 status)

Re: [PATCH 4.4 00/21] 4.4.25-stable review

[Shuah Khan]

On 10/14/2016 05:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.25 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Oct 16 11:40:11 UTC 2016.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.25-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com

Re: [PATCH 4.4 00/21] 4.4.25-stable review

[Guenter Roeck]

On Fri, Oct 14, 2016 at 01:40:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.25 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Oct 16 11:40:11 UTC 2016.
> Anything received after that time might be too late.
> 

Build results:
	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 103 pass: 103 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter