[PATCH 02/13] USB: serial: ch341: fix open and resume after B0

[Johan Hovold <johan@kernel.org>]

The private baud_rate variable is used to configure the port at open and
reset-resume, which means it must never be set to (and left at) zero or
reset-resume and all further open attempts will fail.

Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ch341.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d133e72fe888..6279df905c14 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -355,7 +355,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	baud_rate = tty_get_baud_rate(tty);
 
-	priv->baud_rate = baud_rate;
 	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
 
 	switch (C_CSIZE(tty)) {
@@ -388,6 +387,9 @@ static void ch341_set_termios(struct tty_struct *tty,
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
 		spin_unlock_irqrestore(&priv->lock, flags);
+
+		priv->baud_rate = baud_rate;
+
 		r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
 		if (r < 0 && old_termios) {
 			priv->baud_rate = tty_termios_baud_rate(old_termios);
-- 
2.10.2