[PATCH 05/24] USB: serial: io_ti: fix another NULL-deref at open

[Johan Hovold <johan@kernel.org>]

In case a device is left in "boot-mode" we must not register any port
devices in order to avoid a NULL-pointer dereference on open due to
missing endpoints. This could be used by a malicious device to trigger
an OOPS:

Unable to handle kernel NULL pointer dereference at virtual address 00000030
...
[<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial])
[<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8)
[<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial])
[<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_ti.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index bf8a4f432f4b..3b1cfba0ec84 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1508,7 +1508,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
 	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
 	serial->product_info.TiMode = TI_MODE_BOOT;
 
-	return 0;
+	return 1;
 }
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2560,14 +2560,18 @@ static int edge_startup(struct usb_serial *serial)
 
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	usb_set_serial_data(serial, edge_serial);
 
 	status = download_fw(edge_serial);
-	if (status) {
+	if (status < 0) {
 		kfree(edge_serial);
 		return status;
 	}
 
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
 	product_id = le16_to_cpu(
 			edge_serial->serial->dev->descriptor.idProduct);
 
@@ -2579,7 +2583,6 @@ static int edge_startup(struct usb_serial *serial)
 		}
 	}
 
-	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	edge_heartbeat_schedule(edge_serial);
 
 	return 0;
-- 
2.10.2