From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:51656 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935327AbdAFVts (ORCPT ); Fri, 6 Jan 2017 16:49:48 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Adrian Hunter , Dan ODonovan , Ulf Hansson Subject: [PATCH 4.8 09/96] mmc: sdhci: Fix recovery from tuning timeout Date: Fri, 6 Jan 2017 22:42:57 +0100 Message-Id: <20170106214228.059550603@linuxfoundation.org> In-Reply-To: <20170106214227.601120243@linuxfoundation.org> References: <20170106214227.601120243@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.8-stable review patch. If anyone has any objections, please let me know. ------------------ From: Adrian Hunter commit 61e53bd0047d58caee0c7170613045bf96de4458 upstream. Clearing the tuning bits should reset the tuning circuit. However there is more to do. Reset the command and data lines for good measure, and then for eMMC ensure the card is not still trying to process a tuning command by sending a stop command. Note the JEDEC eMMC specification says the stop command (CMD12) can be used to stop a tuning command (CMD21) whereas the SD specification is silent on the subject with respect to the SD tuning command (CMD19). Considering that CMD12 is not a valid SDIO command, the stop command is sent only when the tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far which have been on eMMC. Note that this replaces the commit fe5fb2e3b58f ("mmc: sdhci: Reset cmd and data circuits after tuning failure") which is being reverted for v4.9+. Signed-off-by: Adrian Hunter Tested-by: Dan O'Donovan Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2074,7 +2074,27 @@ static int sdhci_execute_tuning(struct m ctrl &= ~SDHCI_CTRL_EXEC_TUNING; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + err = -EIO; + + if (cmd.opcode != MMC_SEND_TUNING_BLOCK_HS200) + goto out; + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + spin_unlock_irqrestore(&host->lock, flags); + + memset(&cmd, 0, sizeof(cmd)); + cmd.opcode = MMC_STOP_TRANSMISSION; + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = 50; + mmc_wait_for_cmd(mmc, &cmd, 0); + + spin_lock_irqsave(&host->lock, flags); + goto out; }