From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Andrea Merello , Eric Anholt Subject: [PATCH 4.9 43/59] ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED Date: Fri, 13 Jan 2017 13:01:50 +0100 Message-Id: <20170113113841.008466818@linuxfoundation.org> In-Reply-To: <20170113113839.364876751@linuxfoundation.org> References: <20170113113839.364876751@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andrea Merello commit a44e87b47148c6ee6b78509f47e6a15c0fae890a upstream. We are incorrectly defining the pwr LED, attaching it to a gpio line that is wired to the Wi-Fi SDIO module (which fails due to this). The actual power LED is connected to the GPIO expander, which we don't expose currently. Fixes: 9d56c22a7861 ("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.") Thanks-to: Eric Anholt [for clarifying we can't control the LED] Signed-off-by: Andrea Merello Signed-off-by: Eric Anholt Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 7 ------- 1 file changed, 7 deletions(-) --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -15,13 +15,6 @@ act { gpios = <&gpio 47 0>; }; - - pwr { - label = "PWR"; - gpios = <&gpio 35 0>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; }; };