From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Sekhar Nori , "Andrew F. Davis" , Tony Lindgren Subject: [PATCH 4.10 037/129] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI Date: Thu, 11 May 2017 16:11:25 +0200 Message-Id: <20170511141222.498893143@linuxfoundation.org> In-Reply-To: <20170511141220.039886885@linuxfoundation.org> References: <20170511141220.039886885@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sekhar Nori commit f5432f01240ef69a391940d623b6a51768aefd65 upstream. commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") added the TPIC2810 device-tree node under SPI bus instead of I2C1. Fix it. Tested on AM572x IDK by driving on-board LEDs connected to TPIC2810 Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") Signed-off-by: Sekhar Nori Acked-by: Andrew F. Davis Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -311,6 +311,13 @@ /* ID & VBUS GPIOs provided in board dts */ }; }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcspi3 { @@ -326,13 +333,6 @@ spi-max-frequency = <1000000>; spi-cpol; }; - - tpic2810: tpic2810@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; }; &uart3 {