Re: [PATCH] USB: serial: option: add Telewell TW-3G HSPA+ device id

[Johan Hovold <johan@kernel.org>]

[ +CC: Lars ]

On Mon, Jun 12, 2017 at 11:50:13AM +0200, Bj�rn Mork wrote:
> Johan Hovold <johan@kernel.org> writes:
> 
> > Add device-id entry for the Telewell TW-3G HSPA+ modem, which uses the
> > Longcheer vendor id.
> >
> > Reported-by: Teemu Likonen <tlikonen@iki.fi>
> > Cc: stable <stable@vger.kernel.org>
> > Signed-off-by: Johan Hovold <johan@kernel.org>
> > ---
> >  drivers/usb/serial/option.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > Teemu, would you be able to test this patch?
> >
> > Thanks,
> > Johan
> >
> >
> > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> > index 3bf61acfc26b..b48f3557b2e4 100644
> > --- a/drivers/usb/serial/option.c
> > +++ b/drivers/usb/serial/option.c
> > @@ -388,6 +388,9 @@ static void option_instat_callback(struct urb *urb);
> >  /* SpeedUp SU9800 usb 3g modem */
> >  #define SPEEDUP_PRODUCT_SU9800			0x9800
> >  
> > +/* Telewell */
> > +#define TELEWELL_PRODUCT_TW_3G_HSPAP		0x9801
> > +
> >  /* Haier products */
> >  #define HAIER_VENDOR_ID				0x201e
> >  #define HAIER_PRODUCT_CE81B			0x10f8
> > @@ -1877,6 +1880,7 @@ static const struct usb_device_id option_ids[] = {
> >  	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
> >  	},
> >  	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
> > +	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, TELEWELL_PRODUCT_TW_3G_HSPAP, 0xff) },
> >  	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
> >  	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
> >  	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
> 
> 
> I was looking at the Windows drivers on
> https://www.telewell.fi/files/tw-3g_hspa_ajuri.zip
> whiche have this among the serial stuff:
> 
> [QCOM]
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9801&MI_03
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9803&MI_04
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9806&MI_05
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9808&MI_06
> 
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9866&MI_03
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9868&MI_04
> %qcwwan.DeviceDesc%    = qcwwan.ndi, USB\VID_1C9E&PID_9869&MI_05
> 
> 
> It's not clear what type of driver the 'cmntnet.sys' installed by this
> is, but I wonder if it maybe is QMI based on the 'qc' prefix?

I think Lars just suggested that.

> And maybe we should add the remaining device IDs too?

Good idea, I'll respin.

Thanks,
Johan