[PATCH 4.11 19/78] mac80211: dont send SMPS action frame in AP mode when not needed

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit b3dd8279659f14f3624bb32559782d699fa6f7d1 upstream.

mac80211 allows to modify the SMPS state of an AP both,
when it is started, and after it has been started. Such a
change will trigger an action frame to all the peers that
are currently connected, and will be remembered so that
new peers will get notified as soon as they connect (since
the SMPS setting in the beacon may not be the right one).

This means that we need to remember the SMPS state
currently requested as well as the SMPS state that was
configured initially (and advertised in the beacon).
The former is bss->req_smps and the latter is
sdata->smps_mode.

Initially, the AP interface could only be started with
SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF
always. Later, a nl80211 API was added to be able to start
an AP with a different AP mode. That code forgot to update
bss->req_smps and because of that, if the AP interface was
started with SMPS_DYNAMIC, we had:
   sdata->smps_mode = SMPS_DYNAMIC
   bss->req_smps = SMPS_OFF

That configuration made mac80211 think it needs to fire off
an action frame to any new station connecting to the AP in
order to let it know that the actual SMPS configuration is
SMPS_OFF.

Fix that by properly setting bss->req_smps in
ieee80211_start_ap.

Fixes: f69931748730 ("mac80211: set smps_mode according to ap params")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/cfg.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -862,6 +862,8 @@ static int ieee80211_start_ap(struct wip
 	default:
 		return -EINVAL;
 	}
+	sdata->u.ap.req_smps = sdata->smps_mode;
+
 	sdata->needed_rx_chains = sdata->local->rx_chains;
 
 	sdata->vif.bss_conf.beacon_int = params->beacon_interval;