From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Helge Deller <deller@gmx.de>
Subject: [PATCH 3.18 12/28] parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
Date: Wed, 19 Jul 2017 13:15:40 +0200 [thread overview]
Message-ID: <20170719111320.208319234@linuxfoundation.org> (raw)
In-Reply-To: <20170719111319.044769907@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
commit 33f9e02495d15a061f0c94ef46f5103a2d0c20f3 upstream.
Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
systems) produced following BUG:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156
task: 000000009e050000 task.stack: 000000009e04c000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001101111111100001111 Not tainted
r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8
CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2
ORIG_R28: 0000000000000200
IAOQ[0]: sba_dma_supported+0x80/0xd0
IAOQ[1]: sba_dma_supported+0x84/0xd0
RP(r2): parport_pc_probe_port+0x178/0x1200
Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
which PARISC DMA API doesn't handle very nicely. This commit gives back
DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
transaction.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/include/asm/dma-mapping.h | 11 +++++++----
drivers/parisc/ccio-dma.c | 12 ++++++++++++
drivers/parisc/dino.c | 5 ++++-
drivers/parisc/lba_pci.c | 6 ++++--
drivers/parisc/sba_iommu.c | 14 ++++++++++++++
5 files changed, 41 insertions(+), 7 deletions(-)
--- a/arch/parisc/include/asm/dma-mapping.h
+++ b/arch/parisc/include/asm/dma-mapping.h
@@ -39,6 +39,8 @@ struct hppa_dma_ops {
** flush/purge and allocate "regular" cacheable pages for everything.
*/
+#define DMA_ERROR_CODE (~(dma_addr_t)0)
+
#ifdef CONFIG_PA11
extern struct hppa_dma_ops pcxl_dma_ops;
extern struct hppa_dma_ops pcx_dma_ops;
@@ -209,12 +211,13 @@ parisc_walk_tree(struct device *dev)
break;
}
}
- BUG_ON(!dev->platform_data);
return dev->platform_data;
}
-
-#define GET_IOC(dev) (HBA_DATA(parisc_walk_tree(dev))->iommu)
-
+
+#define GET_IOC(dev) ({ \
+ void *__pdata = parisc_walk_tree(dev); \
+ __pdata ? HBA_DATA(__pdata)->iommu : NULL; \
+})
#ifdef CONFIG_IOMMU_CCIO
struct parisc_device;
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -743,6 +743,8 @@ ccio_map_single(struct device *dev, void
BUG_ON(!dev);
ioc = GET_IOC(dev);
+ if (!ioc)
+ return DMA_ERROR_CODE;
BUG_ON(size <= 0);
@@ -807,6 +809,10 @@ ccio_unmap_single(struct device *dev, dm
BUG_ON(!dev);
ioc = GET_IOC(dev);
+ if (!ioc) {
+ WARN_ON(!ioc);
+ return;
+ }
DBG_RUN("%s() iovp 0x%lx/%x\n",
__func__, (long)iova, size);
@@ -910,6 +916,8 @@ ccio_map_sg(struct device *dev, struct s
BUG_ON(!dev);
ioc = GET_IOC(dev);
+ if (!ioc)
+ return 0;
DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
@@ -982,6 +990,10 @@ ccio_unmap_sg(struct device *dev, struct
BUG_ON(!dev);
ioc = GET_IOC(dev);
+ if (!ioc) {
+ WARN_ON(!ioc);
+ return;
+ }
DBG_RUN_SG("%s() START %d entries, %08lx,%x\n",
__func__, nents, sg_virt_addr(sglist), sglist->length);
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -154,7 +154,10 @@ struct dino_device
};
/* Looks nice and keeps the compiler happy */
-#define DINO_DEV(d) ((struct dino_device *) d)
+#define DINO_DEV(d) ({ \
+ void *__pdata = d; \
+ BUG_ON(!__pdata); \
+ (struct dino_device *)__pdata; })
/*
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -111,8 +111,10 @@ static u32 lba_t32;
/* Looks nice and keeps the compiler happy */
-#define LBA_DEV(d) ((struct lba_device *) (d))
-
+#define LBA_DEV(d) ({ \
+ void *__pdata = d; \
+ BUG_ON(!__pdata); \
+ (struct lba_device *)__pdata; })
/*
** Only allow 8 subsidiary busses per LBA
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -691,6 +691,8 @@ static int sba_dma_supported( struct dev
return 0;
ioc = GET_IOC(dev);
+ if (!ioc)
+ return 0;
/*
* check if mask is >= than the current max IO Virt Address
@@ -722,6 +724,8 @@ sba_map_single(struct device *dev, void
int pide;
ioc = GET_IOC(dev);
+ if (!ioc)
+ return DMA_ERROR_CODE;
/* save offset bits */
offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
@@ -803,6 +807,10 @@ sba_unmap_single(struct device *dev, dma
DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
ioc = GET_IOC(dev);
+ if (!ioc) {
+ WARN_ON(!ioc);
+ return;
+ }
offset = iova & ~IOVP_MASK;
iova ^= offset; /* clear offset bits */
size += offset;
@@ -942,6 +950,8 @@ sba_map_sg(struct device *dev, struct sc
DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
ioc = GET_IOC(dev);
+ if (!ioc)
+ return 0;
/* Fast path single entry scatterlists. */
if (nents == 1) {
@@ -1028,6 +1038,10 @@ sba_unmap_sg(struct device *dev, struct
__func__, nents, sg_virt_addr(sglist), sglist->length);
ioc = GET_IOC(dev);
+ if (!ioc) {
+ WARN_ON(!ioc);
+ return;
+ }
#ifdef SBA_COLLECT_STATS
ioc->usg_calls++;
next prev parent reply other threads:[~2017-07-19 11:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-19 11:15 [PATCH 3.18 00/28] 3.18.62-stable review Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 01/28] ipv6: avoid unregistering inet6_dev for loopback Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 02/28] tcp: reset sk_rx_dst in tcp_disconnect() Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 03/28] net: prevent sign extension in dev_get_stats() Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 04/28] ipv6: dad: dont remove dynamic addresses if link is down Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 06/28] cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 07/28] cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 08/28] cfg80211: Check if PMKID attribute is of expected size Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 09/28] irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 10/28] parisc: Report SIGSEGV instead of SIGBUS when running out of stack Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 11/28] parisc: use compat_sys_keyctl() Greg Kroah-Hartman
2017-07-19 11:15 ` Greg Kroah-Hartman [this message]
2017-07-19 11:15 ` [PATCH 3.18 13/28] parisc/mm: Ensure IRQs are off in switch_mm() Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 14/28] tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 15/28] kernel/extable.c: mark core_kernel_text notrace Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 16/28] fs/dcache.c: fix spin lockup issue on nlru->lock Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 17/28] checkpatch: silence perl 5.26.0 unescaped left brace warnings Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 18/28] exec: Limit arg stack to at most 75% of _STK_LIM Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 19/28] vt: fix unchecked __put_user() in tioclinux ioctls Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 22/28] crypto: atmel - only treat EBUSY as transient if backlog Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 23/28] crypto: sha1-ssse3 - Disable avx2 Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 25/28] sched/topology: Optimize build_group_mask() Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 26/28] sched/topology: Fix overlapping sched_group_mask Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 27/28] PM / QoS: return -EINVAL for bogus strings Greg Kroah-Hartman
2017-07-19 11:15 ` [PATCH 3.18 28/28] tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results Greg Kroah-Hartman
2017-07-19 20:31 ` [PATCH 3.18 00/28] 3.18.62-stable review Guenter Roeck
2017-07-19 23:40 ` Shuah Khan
2017-07-20 5:07 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170719111320.208319234@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=deller@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).