[PATCH 4.4 24/47] iwlwifi: add workaround to disable wide channels in 5GHz

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luca Coelho <luciano.coelho@intel.com>

commit 01a9c948a09348950515bf2abb6113ed83e696d8 upstream.

The OTP in some SKUs have erroneously allowed 40MHz and 80MHz channels
in the 5.2GHz band.  The firmware has been modified to not allow this
in those SKUs, so the driver needs to do the same otherwise the
firmware will assert when we try to use it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/net/wireless/iwlwifi/iwl-nvm-parse.c |   70 ++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 12 deletions(-)

--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -73,6 +73,7 @@
 /* NVM offsets (in words) definitions */
 enum wkp_nvm_offsets {
 	/* NVM HW-Section offset (in words) definitions */
+	SUBSYSTEM_ID = 0x0A,
 	HW_ADDR = 0x15,
 
 	/* NVM SW-Section offset (in words) definitions */
@@ -257,13 +258,12 @@ static u32 iwl_get_channel_flags(u8 ch_n
 static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
 				struct iwl_nvm_data *data,
 				const __le16 * const nvm_ch_flags,
-				bool lar_supported)
+				bool lar_supported, bool no_wide_in_5ghz)
 {
 	int ch_idx;
 	int n_channels = 0;
 	struct ieee80211_channel *channel;
 	u16 ch_flags;
-	bool is_5ghz;
 	int num_of_ch, num_2ghz_channels;
 	const u8 *nvm_chan;
 
@@ -278,12 +278,20 @@ static int iwl_init_channel_map(struct d
 	}
 
 	for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
+		bool is_5ghz = (ch_idx >= num_2ghz_channels);
+
 		ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
 
-		if (ch_idx >= num_2ghz_channels &&
-		    !data->sku_cap_band_52GHz_enable)
+		if (is_5ghz && !data->sku_cap_band_52GHz_enable)
 			continue;
 
+		/* workaround to disable wide channels in 5GHz */
+		if (no_wide_in_5ghz && is_5ghz) {
+			ch_flags &= ~(NVM_CHANNEL_40MHZ |
+				     NVM_CHANNEL_80MHZ |
+				     NVM_CHANNEL_160MHZ);
+		}
+
 		if (!lar_supported && !(ch_flags & NVM_CHANNEL_VALID)) {
 			/*
 			 * Channels might become valid later if lar is
@@ -303,8 +311,8 @@ static int iwl_init_channel_map(struct d
 		n_channels++;
 
 		channel->hw_value = nvm_chan[ch_idx];
-		channel->band = (ch_idx < num_2ghz_channels) ?
-				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+		channel->band = is_5ghz ?
+				IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
 		channel->center_freq =
 			ieee80211_channel_to_frequency(
 				channel->hw_value, channel->band);
@@ -316,7 +324,6 @@ static int iwl_init_channel_map(struct d
 		 * is not used in mvm, and is used for backwards compatibility
 		 */
 		channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
-		is_5ghz = channel->band == IEEE80211_BAND_5GHZ;
 
 		/* don't put limitations in case we're using LAR */
 		if (!lar_supported)
@@ -405,7 +412,8 @@ static void iwl_init_vht_hw_capab(const
 static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
 			    struct iwl_nvm_data *data,
 			    const __le16 *ch_section,
-			    u8 tx_chains, u8 rx_chains, bool lar_supported)
+			    u8 tx_chains, u8 rx_chains, bool lar_supported,
+			    bool no_wide_in_5ghz)
 {
 	int n_channels;
 	int n_used = 0;
@@ -414,12 +422,14 @@ static void iwl_init_sbands(struct devic
 	if (cfg->device_family != IWL_DEVICE_FAMILY_8000)
 		n_channels = iwl_init_channel_map(
 				dev, cfg, data,
-				&ch_section[NVM_CHANNELS], lar_supported);
+				&ch_section[NVM_CHANNELS], lar_supported,
+				no_wide_in_5ghz);
 	else
 		n_channels = iwl_init_channel_map(
 				dev, cfg, data,
 				&ch_section[NVM_CHANNELS_FAMILY_8000],
-				lar_supported);
+				lar_supported,
+				no_wide_in_5ghz);
 
 	sband = &data->bands[IEEE80211_BAND_2GHZ];
 	sband->band = IEEE80211_BAND_2GHZ;
@@ -582,6 +592,39 @@ static void iwl_set_hw_address_family_80
 
 #define IWL_4165_DEVICE_ID 0x5501
 
+static bool
+iwl_nvm_no_wide_in_5ghz(struct device *dev, const struct iwl_cfg *cfg,
+			const __le16 *nvm_hw)
+{
+	/*
+	 * Workaround a bug in Indonesia SKUs where the regulatory in
+	 * some 7000-family OTPs erroneously allow wide channels in
+	 * 5GHz.  To check for Indonesia, we take the SKU value from
+	 * bits 1-4 in the subsystem ID and check if it is either 5 or
+	 * 9.  In those cases, we need to force-disable wide channels
+	 * in 5GHz otherwise the FW will throw a sysassert when we try
+	 * to use them.
+	 */
+	if (cfg->device_family == IWL_DEVICE_FAMILY_7000) {
+		/*
+		 * Unlike the other sections in the NVM, the hw
+		 * section uses big-endian.
+		 */
+		u16 subsystem_id = be16_to_cpup((const __be16 *)nvm_hw
+						+ SUBSYSTEM_ID);
+		u8 sku = (subsystem_id & 0x1e) >> 1;
+
+		if (sku == 5 || sku == 9) {
+			IWL_DEBUG_EEPROM(dev,
+					 "disabling wide channels in 5GHz (0x%0x %d)\n",
+					 subsystem_id, sku);
+			return true;
+		}
+	}
+
+	return false;
+}
+
 struct iwl_nvm_data *
 iwl_parse_nvm_data(struct device *dev, const struct iwl_cfg *cfg,
 		   const __le16 *nvm_hw, const __le16 *nvm_sw,
@@ -591,6 +634,7 @@ iwl_parse_nvm_data(struct device *dev, c
 		   u32 mac_addr0, u32 mac_addr1, u32 hw_id)
 {
 	struct iwl_nvm_data *data;
+	bool no_wide_in_5ghz = iwl_nvm_no_wide_in_5ghz(dev, cfg, nvm_hw);
 	u32 sku;
 	u32 radio_cfg;
 	u16 lar_config;
@@ -657,7 +701,8 @@ iwl_parse_nvm_data(struct device *dev, c
 		iwl_set_hw_address(cfg, data, nvm_hw);
 
 		iwl_init_sbands(dev, cfg, data, nvm_sw,
-				tx_chains, rx_chains, lar_fw_supported);
+				tx_chains, rx_chains, lar_fw_supported,
+				no_wide_in_5ghz);
 	} else {
 		u16 lar_offset = data->nvm_version < 0xE39 ?
 				 NVM_LAR_OFFSET_FAMILY_8000_OLD :
@@ -673,7 +718,8 @@ iwl_parse_nvm_data(struct device *dev, c
 
 		iwl_init_sbands(dev, cfg, data, regulatory,
 				tx_chains, rx_chains,
-				lar_fw_supported && data->lar_enabled);
+				lar_fw_supported && data->lar_enabled,
+				no_wide_in_5ghz);
 	}
 
 	data->calib_version = 255;