From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Maksim Salau <msalau@iotecha.com>,
Oliver Neukum <oneukum@suse.com>
Subject: [PATCH 3.18 04/20] usb: cdc_acm: Add quirk for Elatec TWN3
Date: Tue, 24 Oct 2017 14:57:31 +0200 [thread overview]
Message-ID: <20171024125652.066673309@linuxfoundation.org> (raw)
In-Reply-To: <20171024125651.887979850@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maksim Salau <msalau@iotecha.com>
commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream.
Elatec TWN3 has the union descriptor on data interface. This results in
failure to bind the device to the driver with the following log:
usb 1-1.2: new full speed USB device using streamplug-ehci and address 4
usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: RFID Device (COM)
usb 1-1.2: Manufacturer: OEM
cdc_acm 1-1.2:1.0: Zero length descriptor references
cdc_acm: probe of 1-1.2:1.0 failed with error -22
Adding the NO_UNION_NORMAL quirk for the device fixes the issue.
`lsusb -v` of the device:
Bus 001 Device 003: ID 09d8:0320
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x09d8
idProduct 0x0320
bcdDevice 3.00
iManufacturer 1 OEM
iProduct 2 RFID Device (COM)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 250mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Device Status: 0x0000
(Bus Powered)
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/class/cdc-acm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1779,6 +1779,9 @@ static const struct usb_device_id acm_id
{ USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
+ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
+ },
{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
.driver_info = CLEAR_HALT_CONDITIONS,
next prev parent reply other threads:[~2017-10-24 12:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-24 12:57 [PATCH 3.18 00/20] 3.18.78-stable review Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 01/20] USB: devio: Revert "USB: devio: Dont corrupt user memory" Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 02/20] USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 03/20] USB: serial: metro-usb: add MS7820 device id Greg Kroah-Hartman
2017-10-24 12:57 ` Greg Kroah-Hartman [this message]
2017-10-24 12:57 ` [PATCH 3.18 06/20] usb: hub: Allow reset retry for USB2 devices on connect bounce Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 07/20] can: gs_usb: fix busy loop if no more TX context is available Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 09/20] ALSA: seq: Enable use locking in all configurations Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 10/20] ALSA: hda: Remove superfluous - added by printk conversion Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 11/20] i2c: ismt: Separate I2C block read from SMBus block read Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 12/20] brcmsmac: make some local variables static const to reduce stack size Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 13/20] bus: mbus: fix window size calculation for 4GB windows Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 14/20] KEYS: encrypted: fix dereference of NULL user_key_payload Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 15/20] lib/digsig: " Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 16/20] KEYS: dont let add_key() update an uninstantiated key Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 18/20] parisc: Avoid trashing sr2 and sr3 in LWS code Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 19/20] parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels Greg Kroah-Hartman
2017-10-24 12:57 ` [PATCH 3.18 20/20] af_packet: dont pass empty blocks for PACKET_V3 Greg Kroah-Hartman
2017-10-24 21:27 ` [PATCH 3.18 00/20] 3.18.78-stable review Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171024125652.066673309@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=msalau@iotecha.com \
--cc=oneukum@suse.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).