From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Arend van Spriel <arend.vanspriel@broadcom.com>,
Arnd Bergmann <arnd@arndb.de>, Kalle Valo <kvalo@codeaurora.org>
Subject: [PATCH 4.9 23/48] brcmsmac: make some local variables static const to reduce stack size
Date: Tue, 24 Oct 2017 15:03:36 +0200 [thread overview]
Message-ID: <20171024125728.809176676@linuxfoundation.org> (raw)
In-Reply-To: <20171024125727.668462013@linuxfoundation.org>
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
commit c503dd38f850be28867ef7a42d9abe5ade81a9bd upstream.
With KASAN and a couple of other patches applied, this driver is one
of the few remaining ones that actually use more than 2048 bytes of
kernel stack:
broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=]
broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Here, I'm reducing the stack size by marking as many local variables as
'static const' as I can without changing the actual code.
This is the first of three patches to improve the stack usage in this
driver. It would be good to have this backported to stabl kernels
to get all drivers in 'allmodconfig' below the 2048 byte limit so
we can turn on the frame warning again globally, but I realize that
the patch is larger than the normal limit for stable backports.
The other two patches do not need to be backported.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c | 197 +++++------
1 file changed, 97 insertions(+), 100 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -14764,8 +14764,8 @@ static void wlc_phy_ipa_restore_tx_digi_
}
static void
-wlc_phy_set_rfseq_nphy(struct brcms_phy *pi, u8 cmd, u8 *events, u8 *dlys,
- u8 len)
+wlc_phy_set_rfseq_nphy(struct brcms_phy *pi, u8 cmd, const u8 *events,
+ const u8 *dlys, u8 len)
{
u32 t1_offset, t2_offset;
u8 ctr;
@@ -15240,16 +15240,16 @@ static void wlc_phy_workarounds_nphy_gai
static void wlc_phy_workarounds_nphy_gainctrl_2057_rev6(struct brcms_phy *pi)
{
u16 currband;
- s8 lna1G_gain_db_rev7[] = { 9, 14, 19, 24 };
- s8 *lna1_gain_db = NULL;
- s8 *lna1_gain_db_2 = NULL;
- s8 *lna2_gain_db = NULL;
- s8 tiaA_gain_db_rev7[] = { -9, -6, -3, 0, 3, 3, 3, 3, 3, 3 };
- s8 *tia_gain_db;
- s8 tiaA_gainbits_rev7[] = { 0, 1, 2, 3, 4, 4, 4, 4, 4, 4 };
- s8 *tia_gainbits;
- u16 rfseqA_init_gain_rev7[] = { 0x624f, 0x624f };
- u16 *rfseq_init_gain;
+ static const s8 lna1G_gain_db_rev7[] = { 9, 14, 19, 24 };
+ const s8 *lna1_gain_db = NULL;
+ const s8 *lna1_gain_db_2 = NULL;
+ const s8 *lna2_gain_db = NULL;
+ static const s8 tiaA_gain_db_rev7[] = { -9, -6, -3, 0, 3, 3, 3, 3, 3, 3 };
+ const s8 *tia_gain_db;
+ static const s8 tiaA_gainbits_rev7[] = { 0, 1, 2, 3, 4, 4, 4, 4, 4, 4 };
+ const s8 *tia_gainbits;
+ static const u16 rfseqA_init_gain_rev7[] = { 0x624f, 0x624f };
+ const u16 *rfseq_init_gain;
u16 init_gaincode;
u16 clip1hi_gaincode;
u16 clip1md_gaincode = 0;
@@ -15310,10 +15310,9 @@ static void wlc_phy_workarounds_nphy_gai
if ((freq <= 5080) || (freq == 5825)) {
- s8 lna1A_gain_db_rev7[] = { 11, 16, 20, 24 };
- s8 lna1A_gain_db_2_rev7[] = {
- 11, 17, 22, 25};
- s8 lna2A_gain_db_rev7[] = { -1, 6, 10, 14 };
+ static const s8 lna1A_gain_db_rev7[] = { 11, 16, 20, 24 };
+ static const s8 lna1A_gain_db_2_rev7[] = { 11, 17, 22, 25};
+ static const s8 lna2A_gain_db_rev7[] = { -1, 6, 10, 14 };
crsminu_th = 0x3e;
lna1_gain_db = lna1A_gain_db_rev7;
@@ -15321,10 +15320,9 @@ static void wlc_phy_workarounds_nphy_gai
lna2_gain_db = lna2A_gain_db_rev7;
} else if ((freq >= 5500) && (freq <= 5700)) {
- s8 lna1A_gain_db_rev7[] = { 11, 17, 21, 25 };
- s8 lna1A_gain_db_2_rev7[] = {
- 12, 18, 22, 26};
- s8 lna2A_gain_db_rev7[] = { 1, 8, 12, 16 };
+ static const s8 lna1A_gain_db_rev7[] = { 11, 17, 21, 25 };
+ static const s8 lna1A_gain_db_2_rev7[] = { 12, 18, 22, 26};
+ static const s8 lna2A_gain_db_rev7[] = { 1, 8, 12, 16 };
crsminu_th = 0x45;
clip1md_gaincode_B = 0x14;
@@ -15335,10 +15333,9 @@ static void wlc_phy_workarounds_nphy_gai
lna2_gain_db = lna2A_gain_db_rev7;
} else {
- s8 lna1A_gain_db_rev7[] = { 12, 18, 22, 26 };
- s8 lna1A_gain_db_2_rev7[] = {
- 12, 18, 22, 26};
- s8 lna2A_gain_db_rev7[] = { -1, 6, 10, 14 };
+ static const s8 lna1A_gain_db_rev7[] = { 12, 18, 22, 26 };
+ static const s8 lna1A_gain_db_2_rev7[] = { 12, 18, 22, 26};
+ static const s8 lna2A_gain_db_rev7[] = { -1, 6, 10, 14 };
crsminu_th = 0x41;
lna1_gain_db = lna1A_gain_db_rev7;
@@ -15450,65 +15447,65 @@ static void wlc_phy_workarounds_nphy_gai
NPHY_RFSEQ_CMD_CLR_HIQ_DIS,
NPHY_RFSEQ_CMD_SET_HPF_BW
};
- u8 rfseq_updategainu_dlys[] = { 10, 30, 1 };
- s8 lna1G_gain_db[] = { 7, 11, 16, 23 };
- s8 lna1G_gain_db_rev4[] = { 8, 12, 17, 25 };
- s8 lna1G_gain_db_rev5[] = { 9, 13, 18, 26 };
- s8 lna1G_gain_db_rev6[] = { 8, 13, 18, 25 };
- s8 lna1G_gain_db_rev6_224B0[] = { 10, 14, 19, 27 };
- s8 lna1A_gain_db[] = { 7, 11, 17, 23 };
- s8 lna1A_gain_db_rev4[] = { 8, 12, 18, 23 };
- s8 lna1A_gain_db_rev5[] = { 6, 10, 16, 21 };
- s8 lna1A_gain_db_rev6[] = { 6, 10, 16, 21 };
- s8 *lna1_gain_db = NULL;
- s8 lna2G_gain_db[] = { -5, 6, 10, 14 };
- s8 lna2G_gain_db_rev5[] = { -3, 7, 11, 16 };
- s8 lna2G_gain_db_rev6[] = { -5, 6, 10, 14 };
- s8 lna2G_gain_db_rev6_224B0[] = { -5, 6, 10, 15 };
- s8 lna2A_gain_db[] = { -6, 2, 6, 10 };
- s8 lna2A_gain_db_rev4[] = { -5, 2, 6, 10 };
- s8 lna2A_gain_db_rev5[] = { -7, 0, 4, 8 };
- s8 lna2A_gain_db_rev6[] = { -7, 0, 4, 8 };
- s8 *lna2_gain_db = NULL;
- s8 tiaG_gain_db[] = {
+ static const u8 rfseq_updategainu_dlys[] = { 10, 30, 1 };
+ static const s8 lna1G_gain_db[] = { 7, 11, 16, 23 };
+ static const s8 lna1G_gain_db_rev4[] = { 8, 12, 17, 25 };
+ static const s8 lna1G_gain_db_rev5[] = { 9, 13, 18, 26 };
+ static const s8 lna1G_gain_db_rev6[] = { 8, 13, 18, 25 };
+ static const s8 lna1G_gain_db_rev6_224B0[] = { 10, 14, 19, 27 };
+ static const s8 lna1A_gain_db[] = { 7, 11, 17, 23 };
+ static const s8 lna1A_gain_db_rev4[] = { 8, 12, 18, 23 };
+ static const s8 lna1A_gain_db_rev5[] = { 6, 10, 16, 21 };
+ static const s8 lna1A_gain_db_rev6[] = { 6, 10, 16, 21 };
+ const s8 *lna1_gain_db = NULL;
+ static const s8 lna2G_gain_db[] = { -5, 6, 10, 14 };
+ static const s8 lna2G_gain_db_rev5[] = { -3, 7, 11, 16 };
+ static const s8 lna2G_gain_db_rev6[] = { -5, 6, 10, 14 };
+ static const s8 lna2G_gain_db_rev6_224B0[] = { -5, 6, 10, 15 };
+ static const s8 lna2A_gain_db[] = { -6, 2, 6, 10 };
+ static const s8 lna2A_gain_db_rev4[] = { -5, 2, 6, 10 };
+ static const s8 lna2A_gain_db_rev5[] = { -7, 0, 4, 8 };
+ static const s8 lna2A_gain_db_rev6[] = { -7, 0, 4, 8 };
+ const s8 *lna2_gain_db = NULL;
+ static const s8 tiaG_gain_db[] = {
0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A };
- s8 tiaA_gain_db[] = {
+ static const s8 tiaA_gain_db[] = {
0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13 };
- s8 tiaA_gain_db_rev4[] = {
+ static const s8 tiaA_gain_db_rev4[] = {
0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d };
- s8 tiaA_gain_db_rev5[] = {
+ static const s8 tiaA_gain_db_rev5[] = {
0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d };
- s8 tiaA_gain_db_rev6[] = {
+ static const s8 tiaA_gain_db_rev6[] = {
0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d };
- s8 *tia_gain_db;
- s8 tiaG_gainbits[] = {
+ const s8 *tia_gain_db;
+ static const s8 tiaG_gainbits[] = {
0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03 };
- s8 tiaA_gainbits[] = {
+ static const s8 tiaA_gainbits[] = {
0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06 };
- s8 tiaA_gainbits_rev4[] = {
+ static const s8 tiaA_gainbits_rev4[] = {
0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04 };
- s8 tiaA_gainbits_rev5[] = {
+ static const s8 tiaA_gainbits_rev5[] = {
0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04 };
- s8 tiaA_gainbits_rev6[] = {
+ static const s8 tiaA_gainbits_rev6[] = {
0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04 };
- s8 *tia_gainbits;
- s8 lpf_gain_db[] = { 0x00, 0x06, 0x0c, 0x12, 0x12, 0x12 };
- s8 lpf_gainbits[] = { 0x00, 0x01, 0x02, 0x03, 0x03, 0x03 };
- u16 rfseqG_init_gain[] = { 0x613f, 0x613f, 0x613f, 0x613f };
- u16 rfseqG_init_gain_rev4[] = { 0x513f, 0x513f, 0x513f, 0x513f };
- u16 rfseqG_init_gain_rev5[] = { 0x413f, 0x413f, 0x413f, 0x413f };
- u16 rfseqG_init_gain_rev5_elna[] = {
+ const s8 *tia_gainbits;
+ static const s8 lpf_gain_db[] = { 0x00, 0x06, 0x0c, 0x12, 0x12, 0x12 };
+ static const s8 lpf_gainbits[] = { 0x00, 0x01, 0x02, 0x03, 0x03, 0x03 };
+ static const u16 rfseqG_init_gain[] = { 0x613f, 0x613f, 0x613f, 0x613f };
+ static const u16 rfseqG_init_gain_rev4[] = { 0x513f, 0x513f, 0x513f, 0x513f };
+ static const u16 rfseqG_init_gain_rev5[] = { 0x413f, 0x413f, 0x413f, 0x413f };
+ static const u16 rfseqG_init_gain_rev5_elna[] = {
0x013f, 0x013f, 0x013f, 0x013f };
- u16 rfseqG_init_gain_rev6[] = { 0x513f, 0x513f };
- u16 rfseqG_init_gain_rev6_224B0[] = { 0x413f, 0x413f };
- u16 rfseqG_init_gain_rev6_elna[] = { 0x113f, 0x113f };
- u16 rfseqA_init_gain[] = { 0x516f, 0x516f, 0x516f, 0x516f };
- u16 rfseqA_init_gain_rev4[] = { 0x614f, 0x614f, 0x614f, 0x614f };
- u16 rfseqA_init_gain_rev4_elna[] = {
+ static const u16 rfseqG_init_gain_rev6[] = { 0x513f, 0x513f };
+ static const u16 rfseqG_init_gain_rev6_224B0[] = { 0x413f, 0x413f };
+ static const u16 rfseqG_init_gain_rev6_elna[] = { 0x113f, 0x113f };
+ static const u16 rfseqA_init_gain[] = { 0x516f, 0x516f, 0x516f, 0x516f };
+ static const u16 rfseqA_init_gain_rev4[] = { 0x614f, 0x614f, 0x614f, 0x614f };
+ static const u16 rfseqA_init_gain_rev4_elna[] = {
0x314f, 0x314f, 0x314f, 0x314f };
- u16 rfseqA_init_gain_rev5[] = { 0x714f, 0x714f, 0x714f, 0x714f };
- u16 rfseqA_init_gain_rev6[] = { 0x714f, 0x714f };
- u16 *rfseq_init_gain;
+ static const u16 rfseqA_init_gain_rev5[] = { 0x714f, 0x714f, 0x714f, 0x714f };
+ static const u16 rfseqA_init_gain_rev6[] = { 0x714f, 0x714f };
+ const u16 *rfseq_init_gain;
u16 initG_gaincode = 0x627e;
u16 initG_gaincode_rev4 = 0x527e;
u16 initG_gaincode_rev5 = 0x427e;
@@ -15538,10 +15535,10 @@ static void wlc_phy_workarounds_nphy_gai
u16 clip1mdA_gaincode_rev6 = 0x2084;
u16 clip1md_gaincode = 0;
u16 clip1loG_gaincode = 0x0074;
- u16 clip1loG_gaincode_rev5[] = {
+ static const u16 clip1loG_gaincode_rev5[] = {
0x0062, 0x0064, 0x006a, 0x106a, 0x106c, 0x1074, 0x107c, 0x207c
};
- u16 clip1loG_gaincode_rev6[] = {
+ static const u16 clip1loG_gaincode_rev6[] = {
0x106a, 0x106c, 0x1074, 0x107c, 0x007e, 0x107e, 0x207e, 0x307e
};
u16 clip1loG_gaincode_rev6_224B0 = 0x1074;
@@ -16066,7 +16063,7 @@ static void wlc_phy_workarounds_nphy_gai
static void wlc_phy_workarounds_nphy(struct brcms_phy *pi)
{
- u8 rfseq_rx2tx_events[] = {
+ static const u8 rfseq_rx2tx_events[] = {
NPHY_RFSEQ_CMD_NOP,
NPHY_RFSEQ_CMD_RXG_FBW,
NPHY_RFSEQ_CMD_TR_SWITCH,
@@ -16076,7 +16073,7 @@ static void wlc_phy_workarounds_nphy(str
NPHY_RFSEQ_CMD_EXT_PA
};
u8 rfseq_rx2tx_dlys[] = { 8, 6, 6, 2, 4, 60, 1 };
- u8 rfseq_tx2rx_events[] = {
+ static const u8 rfseq_tx2rx_events[] = {
NPHY_RFSEQ_CMD_NOP,
NPHY_RFSEQ_CMD_EXT_PA,
NPHY_RFSEQ_CMD_TX_GAIN,
@@ -16085,8 +16082,8 @@ static void wlc_phy_workarounds_nphy(str
NPHY_RFSEQ_CMD_RXG_FBW,
NPHY_RFSEQ_CMD_CLR_HIQ_DIS
};
- u8 rfseq_tx2rx_dlys[] = { 8, 6, 2, 4, 4, 6, 1 };
- u8 rfseq_tx2rx_events_rev3[] = {
+ static const u8 rfseq_tx2rx_dlys[] = { 8, 6, 2, 4, 4, 6, 1 };
+ static const u8 rfseq_tx2rx_events_rev3[] = {
NPHY_REV3_RFSEQ_CMD_EXT_PA,
NPHY_REV3_RFSEQ_CMD_INT_PA_PU,
NPHY_REV3_RFSEQ_CMD_TX_GAIN,
@@ -16096,7 +16093,7 @@ static void wlc_phy_workarounds_nphy(str
NPHY_REV3_RFSEQ_CMD_CLR_HIQ_DIS,
NPHY_REV3_RFSEQ_CMD_END
};
- u8 rfseq_tx2rx_dlys_rev3[] = { 8, 4, 2, 2, 4, 4, 6, 1 };
+ static const u8 rfseq_tx2rx_dlys_rev3[] = { 8, 4, 2, 2, 4, 4, 6, 1 };
u8 rfseq_rx2tx_events_rev3[] = {
NPHY_REV3_RFSEQ_CMD_NOP,
NPHY_REV3_RFSEQ_CMD_RXG_FBW,
@@ -16110,7 +16107,7 @@ static void wlc_phy_workarounds_nphy(str
};
u8 rfseq_rx2tx_dlys_rev3[] = { 8, 6, 6, 4, 4, 18, 42, 1, 1 };
- u8 rfseq_rx2tx_events_rev3_ipa[] = {
+ static const u8 rfseq_rx2tx_events_rev3_ipa[] = {
NPHY_REV3_RFSEQ_CMD_NOP,
NPHY_REV3_RFSEQ_CMD_RXG_FBW,
NPHY_REV3_RFSEQ_CMD_TR_SWITCH,
@@ -16121,15 +16118,15 @@ static void wlc_phy_workarounds_nphy(str
NPHY_REV3_RFSEQ_CMD_INT_PA_PU,
NPHY_REV3_RFSEQ_CMD_END
};
- u8 rfseq_rx2tx_dlys_rev3_ipa[] = { 8, 6, 6, 4, 4, 16, 43, 1, 1 };
- u16 rfseq_rx2tx_dacbufpu_rev7[] = { 0x10f, 0x10f };
+ static const u8 rfseq_rx2tx_dlys_rev3_ipa[] = { 8, 6, 6, 4, 4, 16, 43, 1, 1 };
+ static const u16 rfseq_rx2tx_dacbufpu_rev7[] = { 0x10f, 0x10f };
s16 alpha0, alpha1, alpha2;
s16 beta0, beta1, beta2;
u32 leg_data_weights, ht_data_weights, nss1_data_weights,
stbc_data_weights;
u8 chan_freq_range = 0;
- u16 dac_control = 0x0002;
+ static const u16 dac_control = 0x0002;
u16 aux_adc_vmid_rev7_core0[] = { 0x8e, 0x96, 0x96, 0x96 };
u16 aux_adc_vmid_rev7_core1[] = { 0x8f, 0x9f, 0x9f, 0x96 };
u16 aux_adc_vmid_rev4[] = { 0xa2, 0xb4, 0xb4, 0x89 };
@@ -16139,8 +16136,8 @@ static void wlc_phy_workarounds_nphy(str
u16 aux_adc_gain_rev4[] = { 0x02, 0x02, 0x02, 0x00 };
u16 aux_adc_gain_rev3[] = { 0x02, 0x02, 0x02, 0x00 };
u16 *aux_adc_gain;
- u16 sk_adc_vmid[] = { 0xb4, 0xb4, 0xb4, 0x24 };
- u16 sk_adc_gain[] = { 0x02, 0x02, 0x02, 0x02 };
+ static const u16 sk_adc_vmid[] = { 0xb4, 0xb4, 0xb4, 0x24 };
+ static const u16 sk_adc_gain[] = { 0x02, 0x02, 0x02, 0x02 };
s32 min_nvar_val = 0x18d;
s32 min_nvar_offset_6mbps = 20;
u8 pdetrange;
@@ -16151,9 +16148,9 @@ static void wlc_phy_workarounds_nphy(str
u16 rfseq_rx2tx_lpf_h_hpc_rev7 = 0x77;
u16 rfseq_tx2rx_lpf_h_hpc_rev7 = 0x77;
u16 rfseq_pktgn_lpf_h_hpc_rev7 = 0x77;
- u16 rfseq_htpktgn_lpf_hpc_rev7[] = { 0x77, 0x11, 0x11 };
- u16 rfseq_pktgn_lpf_hpc_rev7[] = { 0x11, 0x11 };
- u16 rfseq_cckpktgn_lpf_hpc_rev7[] = { 0x11, 0x11 };
+ static const u16 rfseq_htpktgn_lpf_hpc_rev7[] = { 0x77, 0x11, 0x11 };
+ static const u16 rfseq_pktgn_lpf_hpc_rev7[] = { 0x11, 0x11 };
+ static const u16 rfseq_cckpktgn_lpf_hpc_rev7[] = { 0x11, 0x11 };
u16 ipalvlshift_3p3_war_en = 0;
u16 rccal_bcap_val, rccal_scap_val;
u16 rccal_tx20_11b_bcap = 0;
@@ -24291,13 +24288,13 @@ static void wlc_phy_update_txcal_ladder_
u16 bbmult;
u16 tblentry;
- struct nphy_txiqcal_ladder ladder_lo[] = {
+ static const struct nphy_txiqcal_ladder ladder_lo[] = {
{3, 0}, {4, 0}, {6, 0}, {9, 0}, {13, 0}, {18, 0},
{25, 0}, {25, 1}, {25, 2}, {25, 3}, {25, 4}, {25, 5},
{25, 6}, {25, 7}, {35, 7}, {50, 7}, {71, 7}, {100, 7}
};
- struct nphy_txiqcal_ladder ladder_iq[] = {
+ static const struct nphy_txiqcal_ladder ladder_iq[] = {
{3, 0}, {4, 0}, {6, 0}, {9, 0}, {13, 0}, {18, 0},
{25, 0}, {35, 0}, {50, 0}, {71, 0}, {100, 0}, {100, 1},
{100, 2}, {100, 3}, {100, 4}, {100, 5}, {100, 6}, {100, 7}
@@ -25773,67 +25770,67 @@ wlc_phy_cal_txiqlo_nphy(struct brcms_phy
u16 cal_gain[2];
struct nphy_iqcal_params cal_params[2];
u32 tbl_len;
- void *tbl_ptr;
+ const void *tbl_ptr;
bool ladder_updated[2];
u8 mphase_cal_lastphase = 0;
int bcmerror = 0;
bool phyhang_avoid_state = false;
- u16 tbl_tx_iqlo_cal_loft_ladder_20[] = {
+ static const u16 tbl_tx_iqlo_cal_loft_ladder_20[] = {
0x0300, 0x0500, 0x0700, 0x0900, 0x0d00, 0x1100, 0x1900, 0x1901,
0x1902,
0x1903, 0x1904, 0x1905, 0x1906, 0x1907, 0x2407, 0x3207, 0x4607,
0x6407
};
- u16 tbl_tx_iqlo_cal_iqimb_ladder_20[] = {
+ static const u16 tbl_tx_iqlo_cal_iqimb_ladder_20[] = {
0x0200, 0x0300, 0x0600, 0x0900, 0x0d00, 0x1100, 0x1900, 0x2400,
0x3200,
0x4600, 0x6400, 0x6401, 0x6402, 0x6403, 0x6404, 0x6405, 0x6406,
0x6407
};
- u16 tbl_tx_iqlo_cal_loft_ladder_40[] = {
+ static const u16 tbl_tx_iqlo_cal_loft_ladder_40[] = {
0x0200, 0x0300, 0x0400, 0x0700, 0x0900, 0x0c00, 0x1200, 0x1201,
0x1202,
0x1203, 0x1204, 0x1205, 0x1206, 0x1207, 0x1907, 0x2307, 0x3207,
0x4707
};
- u16 tbl_tx_iqlo_cal_iqimb_ladder_40[] = {
+ static const u16 tbl_tx_iqlo_cal_iqimb_ladder_40[] = {
0x0100, 0x0200, 0x0400, 0x0700, 0x0900, 0x0c00, 0x1200, 0x1900,
0x2300,
0x3200, 0x4700, 0x4701, 0x4702, 0x4703, 0x4704, 0x4705, 0x4706,
0x4707
};
- u16 tbl_tx_iqlo_cal_startcoefs[] = {
+ static const u16 tbl_tx_iqlo_cal_startcoefs[] = {
0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000
};
- u16 tbl_tx_iqlo_cal_cmds_fullcal[] = {
+ static const u16 tbl_tx_iqlo_cal_cmds_fullcal[] = {
0x8123, 0x8264, 0x8086, 0x8245, 0x8056,
0x9123, 0x9264, 0x9086, 0x9245, 0x9056
};
- u16 tbl_tx_iqlo_cal_cmds_recal[] = {
+ static const u16 tbl_tx_iqlo_cal_cmds_recal[] = {
0x8101, 0x8253, 0x8053, 0x8234, 0x8034,
0x9101, 0x9253, 0x9053, 0x9234, 0x9034
};
- u16 tbl_tx_iqlo_cal_startcoefs_nphyrev3[] = {
+ static const u16 tbl_tx_iqlo_cal_startcoefs_nphyrev3[] = {
0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
0x0000
};
- u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
+ static const u16 tbl_tx_iqlo_cal_cmds_fullcal_nphyrev3[] = {
0x8434, 0x8334, 0x8084, 0x8267, 0x8056, 0x8234,
0x9434, 0x9334, 0x9084, 0x9267, 0x9056, 0x9234
};
- u16 tbl_tx_iqlo_cal_cmds_recal_nphyrev3[] = {
+ static const u16 tbl_tx_iqlo_cal_cmds_recal_nphyrev3[] = {
0x8423, 0x8323, 0x8073, 0x8256, 0x8045, 0x8223,
0x9423, 0x9323, 0x9073, 0x9256, 0x9045, 0x9223
};
next prev parent reply other threads:[~2017-10-24 13:04 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-24 13:03 [PATCH 4.9 00/48] 4.9.59-stable review Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 01/48] USB: devio: Revert "USB: devio: Dont corrupt user memory" Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 02/48] USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 03/48] USB: serial: metro-usb: add MS7820 device id Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 04/48] usb: cdc_acm: Add quirk for Elatec TWN3 Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 06/48] usb: hub: Allow reset retry for USB2 devices on connect bounce Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 07/48] ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 08/48] can: gs_usb: fix busy loop if no more TX context is available Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 09/48] parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 10/48] iio: dummy: events: Add missing break Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 11/48] usb: musb: sunxi: Explicitly release USB PHY on exit Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 12/48] usb: musb: Check for host-mode using is_host_active() on reset interrupt Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 13/48] xhci: Identify USB 3.1 capable hosts by their port protocol capability Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 15/48] drm/nouveau/bsp/g92: disable by default Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 16/48] drm/nouveau/mmu: flush tlbs before deleting page tables Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 17/48] ALSA: seq: Enable use locking in all configurations Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 18/48] ALSA: hda: Remove superfluous - added by printk conversion Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 19/48] ALSA: hda: Abort capability probe at invalid register read Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 20/48] i2c: ismt: Separate I2C block read from SMBus block read Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 22/48] brcmfmac: Add check for short event packets Greg Kroah-Hartman
2017-10-24 13:03 ` Greg Kroah-Hartman [this message]
2017-10-24 13:03 ` [PATCH 4.9 24/48] bus: mbus: fix window size calculation for 4GB windows Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 25/48] clockevents/drivers/cs5535: Improve resilience to spurious interrupts Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 26/48] rtlwifi: rtl8821ae: Fix connection lost problem Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 27/48] x86/microcode/intel: Disable late loading on model 79 Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 28/48] KEYS: encrypted: fix dereference of NULL user_key_payload Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 29/48] lib/digsig: " Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 30/48] KEYS: dont let add_key() update an uninstantiated key Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 31/48] pkcs7: Prevent NULL pointer dereference, since sinfo is not always set Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 32/48] vmbus: fix missing signaling in hv_signal_on_read() Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 33/48] xfs: dont unconditionally clear the reflink flag on zero-block files Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 34/48] xfs: evict CoW fork extents when performing finsert/fcollapse Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 35/48] fs/xfs: Use %pS printk format for direct addresses Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 36/48] xfs: report zeroed or not correctly in xfs_zero_range() Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 37/48] xfs: update i_size after unwritten conversion in dio completion Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 38/48] xfs: perag initialization should only touch m_ag_max_usable for AG 0 Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 39/48] xfs: Capture state of the right inode in xfs_iflush_done Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 40/48] xfs: always swap the cow forks when swapping extents Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 41/48] xfs: handle racy AIO in xfs_reflink_end_cow Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 42/48] xfs: Dont log uninitialised fields in inode structures Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 43/48] xfs: move more RT specific code under CONFIG_XFS_RT Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 44/48] xfs: dont change inode mode if ACL update fails Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 45/48] xfs: reinit btree pointer on attr tree inactivation walk Greg Kroah-Hartman
2017-10-24 13:03 ` [PATCH 4.9 46/48] xfs: handle error if xfs_btree_get_bufs fails Greg Kroah-Hartman
2017-10-24 13:04 ` [PATCH 4.9 47/48] xfs: cancel dirty pages on invalidation Greg Kroah-Hartman
2017-10-24 13:04 ` [PATCH 4.9 48/48] xfs: trim writepage mapping to within eof Greg Kroah-Hartman
2017-10-24 21:28 ` [PATCH 4.9 00/48] 4.9.59-stable review Guenter Roeck
2017-10-24 22:26 ` Tom Gall
2017-10-25 7:02 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171024125728.809176676@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=arend.vanspriel@broadcom.com \
--cc=arnd@arndb.de \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).