From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, syzbot <syzkaller@googlegroups.com>,
Eric Biggers <ebiggers@google.com>,
David Howells <dhowells@redhat.com>,
James Morris <james.l.morris@oracle.com>
Subject: [PATCH 3.18 19/28] KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2]
Date: Mon, 13 Nov 2017 13:55:13 +0100 [thread overview]
Message-ID: <20171113125402.551774341@linuxfoundation.org> (raw)
In-Reply-To: <20171113125400.803506921@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <ebiggers@google.com>
commit 624f5ab8720b3371367327a822c267699c1823b8 upstream.
syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It
can be reproduced by the following command, assuming
CONFIG_PKCS7_TEST_KEY=y:
keyctl add pkcs7_test desc '' @s
The bug is that if the data buffer is empty, an integer underflow occurs
in the following check:
if (unlikely(dp >= datalen - 1))
goto data_overrun_error;
This results in the NULL data pointer being dereferenced.
Fix it by checking for 'datalen - dp < 2' instead.
Also fix the similar check for 'dp >= datalen - n' later in the same
function. That one possibly could result in a buffer overread.
The NULL pointer dereference was reproducible using the "pkcs7_test" key
type but not the "asymmetric" key type because the "asymmetric" key type
checks for a 0-length payload before calling into the ASN.1 decoder but
the "pkcs7_test" key type does not.
The bug report was:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
task: ffff9b6b3798c040 task.stack: ffff9b6b37970000
RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233
RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c
RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0
RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0
Call Trace:
pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139
verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216
pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63
key_create_or_update+0x180/0x530 security/keys/key.c:855
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4585c9
RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8
RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9
RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000
RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae
R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000
Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff
RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78
CR2: 0000000000000000
Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
lib/asn1_decoder.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/lib/asn1_decoder.c
+++ b/lib/asn1_decoder.c
@@ -220,7 +220,7 @@ next_op:
hdr = 2;
/* Extract a tag from the data */
- if (unlikely(dp >= datalen - 1))
+ if (unlikely(datalen - dp < 2))
goto data_overrun_error;
tag = data[dp++];
if (unlikely((tag & 0x1f) == ASN1_LONG_TAG))
@@ -266,7 +266,7 @@ next_op:
int n = len - 0x80;
if (unlikely(n > 2))
goto length_too_long;
- if (unlikely(dp >= datalen - n))
+ if (unlikely(n > datalen - dp))
goto data_overrun_error;
hdr += n;
for (len = 0; n > 0; n--) {
next prev parent reply other threads:[~2017-11-13 12:56 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-13 12:54 [PATCH 3.18 00/28] 3.18.81-stable review Greg Kroah-Hartman
2017-11-13 12:54 ` [PATCH 3.18 01/28] video: fbdev: pmag-ba-fb: Remove bad `__init annotation Greg Kroah-Hartman
2017-11-13 12:54 ` [PATCH 3.18 02/28] xen/netback: set default upper limit of tx/rx queues to 8 Greg Kroah-Hartman
2017-11-13 12:54 ` [PATCH 3.18 03/28] ARM: dts: imx53-qsb-common: fix FEC pinmux config Greg Kroah-Hartman
2017-11-16 4:08 ` Patrick Brünn
2017-11-13 12:54 ` [PATCH 3.18 05/28] ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 06/28] iio: trigger: free trigger resource correctly Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 07/28] dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 08/28] dt-bindings: Add vendor prefix for LEGO Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 10/28] serial: sh-sci: Fix register offsets for the IRDA serial port Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 11/28] usb: hcd: initialize hcd->flags to 0 when rm hcd Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 12/28] IPsec: do not ignore crypto err in ah4 input Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 13/28] Input: mpr121 - handle multiple bits change of status register Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 14/28] Input: mpr121 - set missing event capability Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 15/28] IB/ipoib: Change list_del to list_del_init in the tx object Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 16/28] KEYS: trusted: sanitize all key material Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 17/28] KEYS: trusted: fix writing past end of buffer in trusted_read() Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 18/28] crypto: x86/sha1-mb - fix panic due to unaligned access Greg Kroah-Hartman
2017-11-13 12:55 ` Greg Kroah-Hartman [this message]
2017-11-13 12:55 ` [PATCH 3.18 20/28] ARM: 8720/1: ensure dump_instr() checks addr_limit Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 21/28] ALSA: seq: Fix OSS sysex delivery in OSS emulation Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 22/28] ALSA: seq: Avoid invalid lockdep class warning Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 23/28] MIPS: microMIPS: Fix incorrect mask in insn_table_MM Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 24/28] MIPS: Fix CM region target definitions Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 25/28] MIPS: AR7: Ensure that serial ports are properly set up Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 26/28] rbd: use GFP_NOIO for parent stat and data requests Greg Kroah-Hartman
2017-11-13 12:55 ` [PATCH 3.18 28/28] x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context Greg Kroah-Hartman
2017-11-13 21:50 ` [PATCH 3.18 00/28] 3.18.81-stable review Shuah Khan
2017-11-14 7:43 ` Greg Kroah-Hartman
2017-11-13 22:27 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171113125402.551774341@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=dhowells@redhat.com \
--cc=ebiggers@google.com \
--cc=james.l.morris@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=syzkaller@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).