[PATCH AUTOSEL for 4.14 001/100] usb: build drivers/usb/common/ when USB_SUPPORT is set

[PATCH AUTOSEL for 4.14 001/100] usb: build drivers/usb/common/ when USB_SUPPORT is set

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c9d24f78268be444e803fb2bb138a2f598de9c23 ]

PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side
support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT
is enabled so that drivers/usb/common/ is built.

ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/Makefile b/drivers/Makefile
index d242d3514d30..5f5ccdbad21a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -105,6 +105,7 @@ obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_PHY)		+= usb/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_SUPPORT)	+= usb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/
 obj-$(CONFIG_OF)		+= usb/
-- 
2.11.0

[PATCH AUTOSEL for 4.14 003/100] ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit d09220a887f70368afa79e850c95e74890c0a32d ]

With the CMA changes from Joonsoo Kim <iamjoonsoo.kim@lge.com>, it
was noticed that n900 stopped booting. After investigating it turned
out that n900 save_secure_ram_context does some whacky virtual to
physical address translation for the SRAM data address.

As we now only have minimal parts of omap3 idle code copied to SRAM,
running save_secure_ram_context() in SRAM is not needed. It only gets
called on PM init. And it seems there's no need to ever call this from
SRAM idle code.

So let's just keep save_secure_ram_context() in DDR, and pass it the
physical address of the parameters. We can do everything else in
omap-secure.c like we already do for other secure code.

And since we don't have any documentation, I still have no clue what
the values for 0, 1 and 1 for the parameters might be. If somebody has
figured it out, please do send a patch to add some comments.

Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++
 arch/arm/mach-omap2/omap-secure.h |  4 ++++
 arch/arm/mach-omap2/pm.h          |  4 ----
 arch/arm/mach-omap2/pm34xx.c      | 13 ++++---------
 arch/arm/mach-omap2/sleep34xx.S   | 26 ++++----------------------
 5 files changed, 31 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index 5ac122e88f67..9ff92050053c 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -73,6 +73,25 @@ phys_addr_t omap_secure_ram_mempool_base(void)
 	return omap_secure_memblock_base;
 }
 
+u32 omap3_save_secure_ram(void __iomem *addr, int size)
+{
+	u32 ret;
+	u32 param[5];
+
+	if (size != OMAP3_SAVE_SECURE_RAM_SZ)
+		return OMAP3_SAVE_SECURE_RAM_SZ;
+
+	param[0] = 4;		/* Number of arguments */
+	param[1] = __pa(addr);	/* Physical address for saving */
+	param[2] = 0;
+	param[3] = 1;
+	param[4] = 1;
+
+	ret = save_secure_ram_context(__pa(param));
+
+	return ret;
+}
+
 /**
  * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
  * @idx: The PPA API index
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index bae263fba640..c509cde71f93 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -31,6 +31,8 @@
 /* Maximum Secure memory storage size */
 #define OMAP_SECURE_RAM_STORAGE	(88 * SZ_1K)
 
+#define OMAP3_SAVE_SECURE_RAM_SZ	0x803F
+
 /* Secure low power HAL API index */
 #define OMAP4_HAL_SAVESECURERAM_INDEX	0x1a
 #define OMAP4_HAL_SAVEHW_INDEX		0x1b
@@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
+extern u32 save_secure_ram_context(u32 args_pa);
+extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
 
 extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index b668719b9b25..8e30772cfe32 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz;
 /* ... and its pointer from SRAM after copy */
 extern void (*omap3_do_wfi_sram)(void);
 
-/* save_secure_ram_context function pointer and size, for copy to SRAM */
-extern int save_secure_ram_context(u32 *addr);
-extern unsigned int save_secure_ram_context_sz;
-
 extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608		(1 << 0)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841ba19d64a6..36c55547137c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -48,6 +48,7 @@
 #include "prm3xxx.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "omap-secure.h"
 #include "sram.h"
 #include "control.h"
 #include "vc.h"
@@ -66,7 +67,6 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
-static int (*_omap_save_secure_sram)(u32 *addr);
 void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
@@ -121,8 +121,8 @@ static void omap3_save_secure_ram_context(void)
 		 * will hang the system.
 		 */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)(unsigned long)
-				__pa(omap3_secure_ram_storage));
+		ret = omap3_save_secure_ram(omap3_secure_ram_storage,
+					    OMAP3_SAVE_SECURE_RAM_SZ);
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
@@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  *
  * The minimum set of functions is pushed to SRAM for execution:
  * - omap3_do_wfi for erratum i581 WA,
- * - save_secure_ram_context for security extensions.
  */
 void omap_push_sram_idle(void)
 {
 	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
-
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
-				save_secure_ram_context_sz);
 }
 
 static void __init pm_errata_configure(void)
@@ -553,7 +548,7 @@ int __init omap3_pm_init(void)
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
-			kmalloc(0x803F, GFP_KERNEL);
+			kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
 			pr_err("Memory allocation failed when allocating for secure sram context\n");
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index fa5fd24f524c..22daf4efed68 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
 /*
- * Function to call rom code to save secure ram context. This gets
- * relocated to SRAM, so it can be all in .data section. Otherwise
- * we need to initialize api_params separately.
+ * Function to call rom code to save secure ram context.
+ *
+ * r0 = physical address of the parameters
  */
-	.data
-	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
-	adr	r3, api_params		@ r3 points to parameters
-	str	r0, [r3,#0x4]		@ r0 has sdram address
-	ldr	r12, high_mask
-	and	r3, r3, r12
-	ldr	r12, sram_phy_addr_mask
-	orr	r3, r3, r12
+	mov	r3, r0			@ physical address of parameters
 	mov	r0, #25			@ set service ID for PPA
 	mov	r12, r0			@ copy secure service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
@@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context)
 	nop
 	nop
 	ldmfd	sp!, {r4 - r11, pc}
-	.align
-sram_phy_addr_mask:
-	.word	SRAM_BASE_P
-high_mask:
-	.word	0xffff
-api_params:
-	.word	0x4, 0x0, 0x0, 0x1, 0x1
 ENDPROC(save_secure_ram_context)
-ENTRY(save_secure_ram_context_sz)
-	.word	. - save_secure_ram_context
-
-	.text
 
 /*
  * ======================
-- 
2.11.0

[PATCH AUTOSEL for 4.14 002/100] serdev: fix receive_buf return value when no callback

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit fd00cf81a9a84776ba58e56bd042c726dcf75cf3 ]

The receive_buf callback is supposed to return the number of bytes
processed and should specifically not return a negative errno.

Due to missing sanity checks in the serdev tty-port controller, a driver
not providing a receive_buf callback could cause the flush_to_ldisc()
worker to spin in a tight loop when the tty buffer pointers are
incremented with -EINVAL (-22).

The missing sanity checks have now been added to the tty-port
controller, but let's fix up the serdev-controller helper as well.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/serdev.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index e69402d4a8ae..d609e6dc5bad 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -184,7 +184,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
 	struct serdev_device *serdev = ctrl->serdev;
 
 	if (!serdev || !serdev->ops->receive_buf)
-		return -EINVAL;
+		return 0;
 
 	return serdev->ops->receive_buf(serdev, data, count);
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 004/100] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

[Sasha Levin]

From: Keerthy <j-keerthy@ti.com>

[ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ]

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-omap2/prm33xx.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index d2c5bcabdbeb..ebaf80d72a10 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 005/100] ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ]

There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4
for a while that happens after about 20 - 40 minutes on an idle system
with some data feeding device being connected, like a USB GPS device or
a cellular modem.

This issue happens in cpuidle states C2 and C3 and does not happen if
cpuidle is limited to C1 state only. The symptoms are that the whole
system hangs and never wakes up from idle, and if a watchdog is
configured the system reboots after a while.

Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC
interrupt controller directly as a parent instead of the WUGEN. We
need to pass the interrupts through WUGEN to GIC to provide the wakeup
events for the processor.

Let's fix the issue by removing the gic interrupt-parent and use the
default interrupt-parent wakeupgen instead. Note that omap5.dtsi had
this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert
wakeupgen to stacked domains") but we somehow missed omap4 at that
point.

Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains")
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/omap4.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 64d00f5893a6..1bcf66ec209f 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -861,14 +861,12 @@
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
-- 
2.11.0

[PATCH AUTOSEL for 4.14 007/100] ARM: dts: logicpd-somlv: Fix wl127x pinmux

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ]

The pin assignment for the wl127x interrupt was incorrect.  I am
not sure how this every worked.  This also eliminates a conflict with
the SMC911x ethernet driver and properly moves pinmuxes for the
related gpio to omap3_pmx_wkup from omap3_pmx_core.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/logicpd-som-lv.dtsi | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index c5edc7fe4837..4f2c5ec75714 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -121,7 +121,7 @@
 
 &mmc3 {
 	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
@@ -132,8 +132,8 @@
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1273";
 		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
 		ref-clock-frequency = <26000000>;
 	};
 };
@@ -157,8 +157,6 @@
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
 		>;
@@ -228,6 +226,12 @@
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 		>;
 	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 006/100] ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ]

This patch fixes and issue where the NAND and GPMC based ethernet
controller stopped working.  This also updates the GPMC settings
to be consistent with the Logic PD Torpedo development from the
commit listed above.

Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 ++-
 arch/arm/boot/dts/logicpd-som-lv.dtsi            | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index 38faa90007d7..2fa5eb4bd402 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -72,7 +72,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 26cce4d18405..c5edc7fe4837 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -37,7 +37,7 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-- 
2.11.0

[PATCH AUTOSEL for 4.14 008/100] ARM: dts: am4372: Correct the interrupts_properties of McASP

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ]

Fixes the following warnings:

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@48038000

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@4803C000

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/am4372.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index e5b061469bf8..4714a59fd86d 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -927,7 +927,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8 2>,
@@ -941,7 +942,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10 2>,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 009/100] ARM: dts: am437x-cm-t43: Correct the dmas property of spi0

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ]

The DMA binding for eDMA needs 2 parameters, not 1.
The second, missing parameter is the tptc to be used for the channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/am437x-cm-t43.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 9e92d480576b..3b9a94c274a7 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -301,8 +301,8 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	dmas = <&edma 16
-		&edma 17>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
 	flash: w25q64cvzpig@0 {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 010/100] perf record: Fix -c/-F options for cpu event aliases

[Sasha Levin]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 59622fd496a3175c7bf549046e091d81c303ecff ]

The Intel PMU event aliases have a implicit period= specifier to set the
default period.

Unfortunately this breaks overriding these periods with -c or -F,
because the alias terms look like they are user specified to the
internal parser, and user specified event qualifiers override the
command line options.

Track that they are coming from aliases by adding a "weak" state to the
term. Any weak terms don't override command line options.

I only did it for -c/-F for now, I think that's the only case that's
broken currently.

Before:

$ perf record -c 1000 -vv -e uops_issued.any
...
  { sample_period, sample_freq }   2000003

After:

$ perf record -c 1000 -vv -e uops_issued.any
...
  { sample_period, sample_freq }   1000

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171020202755.21410-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/evsel.c        | 12 ++++++++----
 tools/perf/util/evsel.h        |  1 +
 tools/perf/util/parse-events.c |  2 ++
 tools/perf/util/parse-events.h |  3 +++
 tools/perf/util/pmu.c          |  5 +++++
 5 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 0dccdb89572c..1f6beb3d0c68 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -733,12 +733,16 @@ static void apply_config_terms(struct perf_evsel *evsel,
 	list_for_each_entry(term, config_terms, list) {
 		switch (term->type) {
 		case PERF_EVSEL__CONFIG_TERM_PERIOD:
-			attr->sample_period = term->val.period;
-			attr->freq = 0;
+			if (!(term->weak && opts->user_interval != ULLONG_MAX)) {
+				attr->sample_period = term->val.period;
+				attr->freq = 0;
+			}
 			break;
 		case PERF_EVSEL__CONFIG_TERM_FREQ:
-			attr->sample_freq = term->val.freq;
-			attr->freq = 1;
+			if (!(term->weak && opts->user_freq != UINT_MAX)) {
+				attr->sample_freq = term->val.freq;
+				attr->freq = 1;
+			}
 			break;
 		case PERF_EVSEL__CONFIG_TERM_TIME:
 			if (term->val.time)
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index b4df79d72329..3ed0e9b42378 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -67,6 +67,7 @@ struct perf_evsel_config_term {
 		bool	overwrite;
 		char	*branch;
 	} val;
+	bool weak;
 };
 
 /** struct perf_evsel - event selector
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 56694e3409ea..b25635e945f3 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1115,6 +1115,7 @@ do {								\
 	INIT_LIST_HEAD(&__t->list);				\
 	__t->type       = PERF_EVSEL__CONFIG_TERM_ ## __type;	\
 	__t->val.__name = __val;				\
+	__t->weak	= term->weak;				\
 	list_add_tail(&__t->list, head_terms);			\
 } while (0)
 
@@ -2395,6 +2396,7 @@ static int new_term(struct parse_events_term **_term,
 
 	*term = *temp;
 	INIT_LIST_HEAD(&term->list);
+	term->weak = false;
 
 	switch (term->type_val) {
 	case PARSE_EVENTS__TERM_TYPE_NUM:
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index eed50b54bab3..458b72225a0a 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -101,6 +101,9 @@ struct parse_events_term {
 	/* error string indexes for within parsed string */
 	int err_term;
 	int err_val;
+
+	/* Coming from implicit alias */
+	bool weak;
 };
 
 struct parse_events_error {
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index b10b35a63138..9dff41bcc776 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -404,6 +404,11 @@ static int pmu_alias_terms(struct perf_pmu_alias *alias,
 			parse_events_terms__purge(&list);
 			return ret;
 		}
+		/*
+		 * Weak terms don't override command line options,
+		 * which we don't want for implicit terms in aliases.
+		 */
+		cloned->weak = true;
 		list_add_tail(&cloned->list, &list);
 	}
 	list_splice(&list, terms);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 011/100] perf help: Fix a bug during strstart() conversion

[Sasha Levin]

From: Namhyung Kim <namhyung@kernel.org>

[ Upstream commit af98f2273fd0af31ce327cd1406b67c7be0b6734 ]

The commit 8e99b6d4533c changed prefixcmp() to strstart() but missed to
change the return value in some place.  It makes perf help print
annoying output even for sane config items like below:

  $ perf help
  '.root': unsupported man viewer sub key.
  ...

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171114001542.GA16464@sejong
Fixes: 8e99b6d4533c ("tools include: Adopt strstarts() from the kernel")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-help.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index bd1fedef3d1c..a0f7ed2b869b 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -284,7 +284,7 @@ static int perf_help_config(const char *var, const char *value, void *cb)
 		add_man_viewer(value);
 		return 0;
 	}
-	if (!strstarts(var, "man."))
+	if (strstarts(var, "man."))
 		return add_man_viewer_info(var, value);
 
 	return 0;
@@ -314,7 +314,7 @@ static const char *cmd_to_page(const char *perf_cmd)
 
 	if (!perf_cmd)
 		return "perf";
-	else if (!strstarts(perf_cmd, "perf"))
+	else if (strstarts(perf_cmd, "perf"))
 		return perf_cmd;
 
 	return asprintf(&s, "perf-%s", perf_cmd) < 0 ? NULL : s;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 012/100] perf annotate: Do not truncate instruction names at 6 chars

[Sasha Levin]

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>

[ Upstream commit 05d0e62d9fa0f1002cf82009ef31b36174da5472 ]

There are many instructions, esp on PowerPC, whose mnemonics are longer
than 6 characters. Using precision limit causes truncation of such
mnemonics.

Fix this by removing precision limit. Note that, 'width' is still 6, so
alignment won't get affected for length <= 6.

Before:

   li     r11,-1
   xscvdp vs1,vs1
   add.   r10,r10,r11

After:

  li     r11,-1
  xscvdpsxds vs1,vs1
  add.   r10,r10,r11

Reported-by: Donald Stence <dstence@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20171114032540.4564-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/annotate.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index aa66791b1bfc..41d415707264 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -166,7 +166,7 @@ static void ins__delete(struct ins_operands *ops)
 static int ins__raw_scnprintf(struct ins *ins, char *bf, size_t size,
 			      struct ins_operands *ops)
 {
-	return scnprintf(bf, size, "%-6.6s %s", ins->name, ops->raw);
+	return scnprintf(bf, size, "%-6s %s", ins->name, ops->raw);
 }
 
 int ins__scnprintf(struct ins *ins, char *bf, size_t size,
@@ -231,12 +231,12 @@ static int call__scnprintf(struct ins *ins, char *bf, size_t size,
 			   struct ins_operands *ops)
 {
 	if (ops->target.name)
-		return scnprintf(bf, size, "%-6.6s %s", ins->name, ops->target.name);
+		return scnprintf(bf, size, "%-6s %s", ins->name, ops->target.name);
 
 	if (ops->target.addr == 0)
 		return ins__raw_scnprintf(ins, bf, size, ops);
 
-	return scnprintf(bf, size, "%-6.6s *%" PRIx64, ins->name, ops->target.addr);
+	return scnprintf(bf, size, "%-6s *%" PRIx64, ins->name, ops->target.addr);
 }
 
 static struct ins_ops call_ops = {
@@ -300,7 +300,7 @@ static int jump__scnprintf(struct ins *ins, char *bf, size_t size,
 			c++;
 	}
 
-	return scnprintf(bf, size, "%-6.6s %.*s%" PRIx64,
+	return scnprintf(bf, size, "%-6s %.*s%" PRIx64,
 			 ins->name, c ? c - ops->raw : 0, ops->raw,
 			 ops->target.offset);
 }
@@ -373,7 +373,7 @@ static int lock__scnprintf(struct ins *ins, char *bf, size_t size,
 	if (ops->locked.ins.ops == NULL)
 		return ins__raw_scnprintf(ins, bf, size, ops);
 
-	printed = scnprintf(bf, size, "%-6.6s ", ins->name);
+	printed = scnprintf(bf, size, "%-6s ", ins->name);
 	return printed + ins__scnprintf(&ops->locked.ins, bf + printed,
 					size - printed, ops->locked.ops);
 }
@@ -449,7 +449,7 @@ static int mov__parse(struct arch *arch, struct ins_operands *ops, struct map *m
 static int mov__scnprintf(struct ins *ins, char *bf, size_t size,
 			   struct ins_operands *ops)
 {
-	return scnprintf(bf, size, "%-6.6s %s,%s", ins->name,
+	return scnprintf(bf, size, "%-6s %s,%s", ins->name,
 			 ops->source.name ?: ops->source.raw,
 			 ops->target.name ?: ops->target.raw);
 }
@@ -489,7 +489,7 @@ static int dec__parse(struct arch *arch __maybe_unused, struct ins_operands *ops
 static int dec__scnprintf(struct ins *ins, char *bf, size_t size,
 			   struct ins_operands *ops)
 {
-	return scnprintf(bf, size, "%-6.6s %s", ins->name,
+	return scnprintf(bf, size, "%-6s %s", ins->name,
 			 ops->target.name ?: ops->target.raw);
 }
 
@@ -501,7 +501,7 @@ static struct ins_ops dec_ops = {
 static int nop__scnprintf(struct ins *ins __maybe_unused, char *bf, size_t size,
 			  struct ins_operands *ops __maybe_unused)
 {
-	return scnprintf(bf, size, "%-6.6s", "nop");
+	return scnprintf(bf, size, "%-6s", "nop");
 }
 
 static struct ins_ops nop_ops = {
@@ -925,7 +925,7 @@ void disasm_line__free(struct disasm_line *dl)
 int disasm_line__scnprintf(struct disasm_line *dl, char *bf, size_t size, bool raw)
 {
 	if (raw || !dl->ins.ops)
-		return scnprintf(bf, size, "%-6.6s %s", dl->ins.name, dl->ops.raw);
+		return scnprintf(bf, size, "%-6s %s", dl->ins.name, dl->ops.raw);
 
 	return ins__scnprintf(&dl->ins, bf, size, &dl->ops);
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 013/100] perf test shell: Fix check open filename arg using 'perf trace' on s390x

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit ccafc38f1c778847ab6d53dd7933260426731cf3 ]

This 'perf test' case fails on s390x. The 'touch' command on s390x uses
the 'openat' system call to open the file named on the command line:

[root@s35lp76 perf]# perf probe -l
  probe:vfs_getname    (on getname_flags:72@fs/namei.c with pathname)
[root@s35lp76 perf]# perf trace -e open touch /tmp/abc
     0.400 ( 0.015 ms): touch/27542 open(filename:
		/usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
[root@s35lp76 perf]#

There is no 'open' system call for file '/tmp/abc'. Instead the 'openat'
system call is used:

[root@s35lp76 perf]# strace touch /tmp/abc
    execve("/usr/bin/touch", ["touch", "/tmp/abc"], 0x3ffd547ec98
			/* 30 vars */) = 0
    [...]
    openat(AT_FDCWD, "/tmp/abc", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3
    [...]

On s390x the 'egrep' command does not find a matching pattern and
returns an error.

Fix this for s390x create a platform dependent command line to enable
the 'perf probe' call to listen to the 'openat' system call and get the
expected output.

Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20171114071847.2381-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-3qf38jk0prz54rhmhyu871my@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/tests/shell/trace+probe_vfs_getname.sh | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/perf/tests/shell/trace+probe_vfs_getname.sh b/tools/perf/tests/shell/trace+probe_vfs_getname.sh
index 2e68c5f120da..2a9ef080efd0 100755
--- a/tools/perf/tests/shell/trace+probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/trace+probe_vfs_getname.sh
@@ -17,8 +17,10 @@ skip_if_no_perf_probe || exit 2
 file=$(mktemp /tmp/temporary_file.XXXXX)
 
 trace_open_vfs_getname() {
-	perf trace -e open touch $file 2>&1 | \
-	egrep " +[0-9]+\.[0-9]+ +\( +[0-9]+\.[0-9]+ ms\): +touch\/[0-9]+ open\(filename: +${file}, +flags: CREAT\|NOCTTY\|NONBLOCK\|WRONLY, +mode: +IRUGO\|IWUGO\) += +[0-9]+$"
+	test "$(uname -m)" = s390x && { svc="openat"; txt="dfd: +CWD, +"; }
+
+	perf trace -e ${svc:-open} touch $file 2>&1 | \
+	egrep " +[0-9]+\.[0-9]+ +\( +[0-9]+\.[0-9]+ ms\): +touch\/[0-9]+ ${svc:-open}\(${txt}filename: +${file}, +flags: CREAT\|NOCTTY\|NONBLOCK\|WRONLY, +mode: +IRUGO\|IWUGO\) += +[0-9]+$"
 }
 
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 014/100] perf: Fix header.size for namespace events

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit 34900ec5c9577cc1b0f22887ac7349f458ba8ac2 ]

Reset header size for namespace events, otherwise it only gets bigger in
ctx iterations.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: e422267322cd ("perf: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/n/tip-nlo4gonz9d4guyb8153ukzt0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/events/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 24ebad5567b4..5253dbba66ea 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6719,6 +6719,7 @@ static void perf_event_namespaces_output(struct perf_event *event,
 	struct perf_namespaces_event *namespaces_event = data;
 	struct perf_output_handle handle;
 	struct perf_sample_data sample;
+	u16 header_size = namespaces_event->event_id.header.size;
 	int ret;
 
 	if (!perf_event_namespaces_match(event))
@@ -6729,7 +6730,7 @@ static void perf_event_namespaces_output(struct perf_event *event,
 	ret = perf_output_begin(&handle, event,
 				namespaces_event->event_id.header.size);
 	if (ret)
-		return;
+		goto out;
 
 	namespaces_event->event_id.pid = perf_event_pid(event,
 							namespaces_event->task);
@@ -6741,6 +6742,8 @@ static void perf_event_namespaces_output(struct perf_event *event,
 	perf_event__output_id_sample(event, &handle, &sample);
 
 	perf_output_end(&handle);
+out:
+	namespaces_event->event_id.header.size = header_size;
 }
 
 static void perf_fill_ns_link_info(struct perf_ns_link_info *ns_link_info,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 015/100] perf top: Fix window dimensions change handling

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit 89d0aeab4252adc2a7ea693637dd21c588bfa2d1 ]

The stdio perf top crashes when we change the terminal
window size. The reason is that we assumed we get the
perf_top pointer as a signal handler argument which is
not the case.

Changing the SIGWINCH handler logic to change global
resize variable, which is checked in the main thread
loop.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-top.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index ee954bde7e3e..dd57978b2096 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -77,6 +77,7 @@
 #include "sane_ctype.h"
 
 static volatile int done;
+static volatile int resize;
 
 #define HEADER_LINE_NR  5
 
@@ -86,10 +87,13 @@ static void perf_top__update_print_entries(struct perf_top *top)
 }
 
 static void perf_top__sig_winch(int sig __maybe_unused,
-				siginfo_t *info __maybe_unused, void *arg)
+				siginfo_t *info __maybe_unused, void *arg __maybe_unused)
 {
-	struct perf_top *top = arg;
+	resize = 1;
+}
 
+static void perf_top__resize(struct perf_top *top)
+{
 	get_term_dimensions(&top->winsize);
 	perf_top__update_print_entries(top);
 }
@@ -477,7 +481,7 @@ static bool perf_top__handle_keypress(struct perf_top *top, int c)
 					.sa_sigaction = perf_top__sig_winch,
 					.sa_flags     = SA_SIGINFO,
 				};
-				perf_top__sig_winch(SIGWINCH, NULL, top);
+				perf_top__resize(top);
 				sigaction(SIGWINCH, &act, NULL);
 			} else {
 				signal(SIGWINCH, SIG_DFL);
@@ -1022,6 +1026,11 @@ static int __cmd_top(struct perf_top *top)
 
 		if (hits == top->samples)
 			ret = perf_evlist__poll(top->evlist, 100);
+
+		if (resize) {
+			perf_top__resize(top);
+			resize = 0;
+		}
 	}
 
 	ret = 0;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 016/100] perf bench numa: Fixup discontiguous/sparse numa nodes

[Sasha Levin]

From: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>

[ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ]

Certain systems are designed to have sparse/discontiguous nodes.  On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/bench/numa.c | 56 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 51 insertions(+), 5 deletions(-)

diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
index d95fdcc26f4b..944070e98a2c 100644
--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -216,6 +216,47 @@ static const char * const numa_usage[] = {
 	NULL
 };
 
+/*
+ * To get number of numa nodes present.
+ */
+static int nr_numa_nodes(void)
+{
+	int i, nr_nodes = 0;
+
+	for (i = 0; i < g->p.nr_nodes; i++) {
+		if (numa_bitmask_isbitset(numa_nodes_ptr, i))
+			nr_nodes++;
+	}
+
+	return nr_nodes;
+}
+
+/*
+ * To check if given numa node is present.
+ */
+static int is_node_present(int node)
+{
+	return numa_bitmask_isbitset(numa_nodes_ptr, node);
+}
+
+/*
+ * To check given numa node has cpus.
+ */
+static bool node_has_cpus(int node)
+{
+	struct bitmask *cpu = numa_allocate_cpumask();
+	unsigned int i;
+
+	if (cpu && !numa_node_to_cpus(node, cpu)) {
+		for (i = 0; i < cpu->size; i++) {
+			if (numa_bitmask_isbitset(cpu, i))
+				return true;
+		}
+	}
+
+	return false; /* lets fall back to nocpus safely */
+}
+
 static cpu_set_t bind_to_cpu(int target_cpu)
 {
 	cpu_set_t orig_mask, mask;
@@ -244,12 +285,12 @@ static cpu_set_t bind_to_cpu(int target_cpu)
 
 static cpu_set_t bind_to_node(int target_node)
 {
-	int cpus_per_node = g->p.nr_cpus/g->p.nr_nodes;
+	int cpus_per_node = g->p.nr_cpus / nr_numa_nodes();
 	cpu_set_t orig_mask, mask;
 	int cpu;
 	int ret;
 
-	BUG_ON(cpus_per_node*g->p.nr_nodes != g->p.nr_cpus);
+	BUG_ON(cpus_per_node * nr_numa_nodes() != g->p.nr_cpus);
 	BUG_ON(!cpus_per_node);
 
 	ret = sched_getaffinity(0, sizeof(orig_mask), &orig_mask);
@@ -649,7 +690,7 @@ static int parse_setup_node_list(void)
 			int i;
 
 			for (i = 0; i < mul; i++) {
-				if (t >= g->p.nr_tasks) {
+				if (t >= g->p.nr_tasks || !node_has_cpus(bind_node)) {
 					printf("\n# NOTE: ignoring bind NODEs starting at NODE#%d\n", bind_node);
 					goto out;
 				}
@@ -964,6 +1005,8 @@ static void calc_convergence(double runtime_ns_max, double *convergence)
 	sum = 0;
 
 	for (node = 0; node < g->p.nr_nodes; node++) {
+		if (!is_node_present(node))
+			continue;
 		nr = nodes[node];
 		nr_min = min(nr, nr_min);
 		nr_max = max(nr, nr_max);
@@ -984,8 +1027,11 @@ static void calc_convergence(double runtime_ns_max, double *convergence)
 	process_groups = 0;
 
 	for (node = 0; node < g->p.nr_nodes; node++) {
-		int processes = count_node_processes(node);
+		int processes;
 
+		if (!is_node_present(node))
+			continue;
+		processes = count_node_processes(node);
 		nr = nodes[node];
 		tprintf(" %2d/%-2d", nr, processes);
 
@@ -1291,7 +1337,7 @@ static void print_summary(void)
 
 	printf("\n ###\n");
 	printf(" # %d %s will execute (on %d nodes, %d CPUs):\n",
-		g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", g->p.nr_nodes, g->p.nr_cpus);
+		g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", nr_numa_nodes(), g->p.nr_cpus);
 	printf(" #      %5dx %5ldMB global  shared mem operations\n",
 			g->p.nr_loops, g->p.bytes_global/1024/1024);
 	printf(" #      %5dx %5ldMB process shared mem operations\n",
-- 
2.11.0

[PATCH AUTOSEL for 4.14 017/100] perf test: Fix test 21 for s390x

[Sasha Levin]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

[ Upstream commit 996548499df61babae5306544c7daf5fd39db31c ]

Test case 21 (Number of exit events of a simple workload) fails on
s390x. The reason is the invalid sample frequency supplied for this
test. On s390x the minimum sample frequency is much higher (see output
of /proc/service_levels).

Supply a save sample frequency value for s390x to fix this.  The value
will be adjusted by the s390x CPUMF frequency convertion function to a
value well below the sysctl kernel.perf_event_max_sample_rate value.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/tests/task-exit.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/perf/tests/task-exit.c b/tools/perf/tests/task-exit.c
index bc4a7344e274..89c8e1604ca7 100644
--- a/tools/perf/tests/task-exit.c
+++ b/tools/perf/tests/task-exit.c
@@ -84,7 +84,11 @@ int test__task_exit(struct test *test __maybe_unused, int subtest __maybe_unused
 
 	evsel = perf_evlist__first(evlist);
 	evsel->attr.task = 1;
+#ifdef __s390x__
+	evsel->attr.sample_freq = 1000000;
+#else
 	evsel->attr.sample_freq = 1;
+#endif
 	evsel->attr.inherit = 0;
 	evsel->attr.watermark = 0;
 	evsel->attr.wakeup_events = 1;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 018/100] pinctrl: denverton: Fix UART2 RTS pin mode

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 4bd6683da2e64590bdc27ecf7e61ad8376861768 ]

UART2 RTS is mode 2 of the pin.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/intel/pinctrl-denverton.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-denverton.c b/drivers/pinctrl/intel/pinctrl-denverton.c
index 4500880240f2..6572550cfe78 100644
--- a/drivers/pinctrl/intel/pinctrl-denverton.c
+++ b/drivers/pinctrl/intel/pinctrl-denverton.c
@@ -207,7 +207,7 @@ static const unsigned int dnv_uart0_pins[] = { 60, 61, 64, 65 };
 static const unsigned int dnv_uart0_modes[] = { 2, 3, 1, 1 };
 static const unsigned int dnv_uart1_pins[] = { 94, 95, 96, 97 };
 static const unsigned int dnv_uart2_pins[] = { 60, 61, 62, 63 };
-static const unsigned int dnv_uart2_modes[] = { 1, 1, 2, 2 };
+static const unsigned int dnv_uart2_modes[] = { 1, 2, 2, 2 };
 static const unsigned int dnv_emmc_pins[] = {
 	142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152,
 };
-- 
2.11.0

[PATCH AUTOSEL for 4.14 019/100] kvm: arm: don't treat unavailable HYP mode as an error

[Sasha Levin]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

[ Upstream commit 58d0d19a204604ca0da26058828a53558b265da3 ]

Since it is perfectly legal to run the kernel at EL1, it is not
actually an error if HYP mode is not available when attempting to
initialize KVM, given that KVM support cannot be built as a module.
So demote the kvm_err() to kvm_info(), which prevents the error from
appearing on an otherwise 'quiet' console.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 virt/kvm/arm/arm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 95cba0799828..5fdd19e28904 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -1448,7 +1448,7 @@ int kvm_arch_init(void *opaque)
 	bool in_hyp_mode;
 
 	if (!is_hyp_mode_available()) {
-		kvm_err("HYP mode not available\n");
+		kvm_info("HYP mode not available\n");
 		return -ENODEV;
 	}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 020/100] trace/xdp: fix compile warning: 'struct bpf_map' declared inside parameter list

[Sasha Levin]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 23721a755f98ac846897a013c92cccb281c1bcc8 ]

We meet this compile warning, which caused by missing bpf.h in xdp.h.

In file included from ./include/trace/events/xdp.h:10:0,
                 from ./include/linux/bpf_trace.h:6,
                 from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29:
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’
  static inline void trace_##name(proto)    \
                                  ^~~~~
./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’
  __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),  \
                        ^~~~~~
./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
  ^~~~~~~~~~~~~
./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
                      ^~~~~~
./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’
 DEFINE_EVENT(xdp_redirect_template, xdp_redirect,
 ^~~~~~~~~~~~
./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’
  TP_PROTO(const struct net_device *dev,
  ^~~~~~~~
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’
  register_trace_##name(void (*probe)(data_proto), void *data) \
                                      ^~~~~~~~~~
./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’
    PARAMS(void *__data, proto),   \
    ^~~~~~

Reported-by: Huang Daode <huangdaode@hisilicon.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Fixes: 8d3b778ff544 ("xdp: tracepoint xdp_redirect also need a map argument")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/trace/events/xdp.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/trace/events/xdp.h b/include/trace/events/xdp.h
index 810e94160c12..f7c73ae62b7a 100644
--- a/include/trace/events/xdp.h
+++ b/include/trace/events/xdp.h
@@ -8,6 +8,7 @@
 #include <linux/netdevice.h>
 #include <linux/filter.h>
 #include <linux/tracepoint.h>
+#include <linux/bpf.h>
 
 #define __XDP_ACT_MAP(FN)	\
 	FN(ABORTED)		\
-- 
2.11.0

[PATCH AUTOSEL for 4.14 021/100] media: s5k6aa: describe some function parameters

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ]

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/s5k6aa.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c
index 9fd254a8e20d..13c10b5e2b45 100644
--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -421,6 +421,7 @@ static int s5k6aa_set_ahb_address(struct i2c_client *client)
 
 /**
  * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  *
  * Configure the internal ISP PLL for the required output frequency.
  * Locking: called with s5k6aa.lock mutex held.
@@ -669,6 +670,7 @@ static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
 
 /**
  * s5k6aa_configure_video_bus - configure the video output interface
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  * @bus_type: video bus type: parallel or MIPI-CSI
  * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
  *
@@ -724,6 +726,8 @@ static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
 
 /**
  * s5k6aa_set_prev_config - write user preview register set
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
+ * @preset: s5kaa preset to be applied
  *
  * Configure output resolution and color fromat, pixel clock
  * frequency range, device frame rate type and frame period range.
@@ -777,6 +781,7 @@ static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
 
 /**
  * s5k6aa_initialize_isp - basic ISP MCU initialization
+ * @sd: pointer to V4L2 sub-device descriptor
  *
  * Configure AHB addresses for registers read/write; configure PLLs for
  * required output pixel clock. The ISP power supply needs to be already
-- 
2.11.0

[PATCH AUTOSEL for 4.14 022/100] media: ov13858: Select V4L2_FWNODE

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit fce8ba670b7418319da14a6fc6668db1f1a96267 ]

The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 94153895fcd4..3bdc34deae7b 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -660,6 +660,7 @@ config VIDEO_OV13858
 	tristate "OmniVision OV13858 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
+	select V4L2_FWNODE
 	---help---
 	  This is a Video4Linux2 sensor-level driver for the OmniVision
 	  OV13858 camera.
-- 
2.11.0

[PATCH AUTOSEL for 4.14 023/100] net: mvpp2: allocate zeroed tx descriptors

[Sasha Levin]

From: Yan Markman <ymarkman@marvell.com>

[ Upstream commit a154f8e399a063137fc42b961f437248d55ece29 ]

Reserved and unused fields in the Tx descriptors should be 0. The PPv2
driver doesn't clear them at run-time (for performance reasons) but
these descriptors aren't zeroed when allocated, which can lead to
unpredictable behaviors. This patch fixes this by using
dma_zalloc_coherent instead of dma_alloc_coherent.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index fcf9ba5eb8d1..e9bc551d7621 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -5408,7 +5408,7 @@ static int mvpp2_aggr_txq_init(struct platform_device *pdev,
 	u32 txq_dma;
 
 	/* Allocate memory for TX descriptors */
-	aggr_txq->descs = dma_alloc_coherent(&pdev->dev,
+	aggr_txq->descs = dma_zalloc_coherent(&pdev->dev,
 				MVPP2_AGGR_TXQ_SIZE * MVPP2_DESC_ALIGNED_SIZE,
 				&aggr_txq->descs_dma, GFP_KERNEL);
 	if (!aggr_txq->descs)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 025/100] gpio: davinci: Assign first bank regs for unbanked case

[Sasha Levin]

From: Keerthy <j-keerthy@ti.com>

[ Upstream commit 7f8e2a85c1b0bd440ffe87be82c79fdc319e8291 ]

As per the re-design assign the first bank regs for unbanked
irq case. This was missed out in the original patch.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: b5cf3fd827d2e1 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpio-davinci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index f75d8443ecaf..e4b3d7db68c9 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -383,7 +383,7 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
 	u32 mask;
 
 	d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data);
-	g = (struct davinci_gpio_regs __iomem *)d->regs;
+	g = (struct davinci_gpio_regs __iomem *)d->regs[0];
 	mask = __gpio_mask(data->irq - d->base_irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
-- 
2.11.0

[PATCH AUTOSEL for 4.14 024/100] gpio: 74x164: Fix crash during .remove()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit a158531f3c92467df0e93e000d58185acae78a6e ]

Commit 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios'
property") added a new member gpiod_oe to the end of the struct
gen_74x164_chip, after the zero-length buffer array.

However, this buffer is a flexible array, allocated together with the
structure during .probe().  As the buffer is no longer the last member,
writing to it corrupts the newly added member after it.
During device removal, the corrupted member will be used as a pointer,
leading to a crash.

This went unnoticed, as the flexible array was declared as "buffer[0]"
instead of "buffer[]", and thus did not trigger a "flexible array member
not at end of struct" error from gcc.

Move the gpiod_oe field up to fix this, and drop the zero from the array
size to prevent future similar bugs.

Fixes: 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios' property")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpio-74x164.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index 6b535ec858cc..15a1f4b348c4 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -23,6 +23,7 @@
 struct gen_74x164_chip {
 	struct gpio_chip	gpio_chip;
 	struct mutex		lock;
+	struct gpio_desc	*gpiod_oe;
 	u32			registers;
 	/*
 	 * Since the registers are chained, every byte sent will make
@@ -31,8 +32,7 @@ struct gen_74x164_chip {
 	 * register at the end of the transfer. So, to have a logical
 	 * numbering, store the bytes in reverse order.
 	 */
-	u8			buffer[0];
-	struct gpio_desc	*gpiod_oe;
+	u8			buffer[];
 };
 
 static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 026/100] pinctrl: sunxi: Fix A80 interrupt pin bank

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 6ad4cc8d1ac483e0fd33f605fb2788b0ecf51ed4 ]

On the A80 the pins on port B can trigger interrupts, and those are
assigned to the second interrupt bank.
Having two pins assigned to the same interrupt bank/pin combination does
not look healthy (instead more like a copy&paste bug from pins PA14-PA16),
so fix the interrupt bank for pins PB14-PB16, which is actually 1.

I don't have any A80 board, so could not test this.

Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index bc14e954d7a2..b7ca9a40cc66 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -145,19 +145,19 @@ static const struct sunxi_desc_pin sun9i_a80_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x3, "mcsi"),		/* MCLK */
-		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)),	/* PB_EINT14 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 14)),	/* PB_EINT14 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 15),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x3, "mcsi"),		/* SCK */
 		  SUNXI_FUNCTION(0x4, "i2c4"),		/* SCK */
-		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)),	/* PB_EINT15 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 15)),	/* PB_EINT15 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 16),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x3, "mcsi"),		/* SDA */
 		  SUNXI_FUNCTION(0x4, "i2c4"),		/* SDA */
-		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)),	/* PB_EINT16 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 16)),	/* PB_EINT16 */
 
 	/* Hole */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
-- 
2.11.0

[PATCH AUTOSEL for 4.14 027/100] pinctrl: sunxi: Fix A64 UART mux value

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 7c5c2c2d18d778e51fd8b899965097168306031c ]

To use pin PF4 as the RX signal of UART0, we have to write 0b011 into
the respective pin controller register.
Fix the wrong value we had in our table so far.

Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
index 4f2a726bbaeb..f5f77432ce6f 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
@@ -428,7 +428,7 @@ static const struct sunxi_desc_pin a64_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
-		  SUNXI_FUNCTION(0x4, "uart0")),	/* RX */
+		  SUNXI_FUNCTION(0x3, "uart0")),	/* RX */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-- 
2.11.0

[PATCH AUTOSEL for 4.14 029/100] meson-gx-socinfo: Fix package id parsing

[Sasha Levin]

From: Arnaud Patard <arnaud.patard@rtp-net.org>

[ Upstream commit 044d71bc6cdee8980d0fdc35ec79a0d5818b2ce3 ]

I've noticed the following message while booting a S905X based board:

soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected

The S905D string is obviously wrong. The vendor code does:
...
        ver = (readl(assist_hw_rev) >> 8) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
        ver =  (readl(assist_hw_rev) >> 16) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...

while the current code does:
...
...

This means that the current mainline code has package id and minor
version reversed.

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/soc/amlogic/meson-gx-socinfo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
index 89f4cf507be6..f2d8c3c53ea4 100644
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -20,8 +20,8 @@
 #define AO_SEC_SOCINFO_OFFSET	AO_SEC_SD_CFG8
 
 #define SOCINFO_MAJOR	GENMASK(31, 24)
-#define SOCINFO_MINOR	GENMASK(23, 16)
-#define SOCINFO_PACK	GENMASK(15, 8)
+#define SOCINFO_PACK	GENMASK(23, 16)
+#define SOCINFO_MINOR	GENMASK(15, 8)
 #define SOCINFO_MISC	GENMASK(7, 0)
 
 static const struct meson_gx_soc_id {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 028/100] IB/hfi1: Initialize bth1 in 16B rc ack builder

[Sasha Levin]

From: Dennis Dalessandro <dennis.dalessandro@intel.com>

[ Upstream commit 8935780b9f7bbad0f2eb5dd43f61ba7b509a1575 ]

It is possible the bth1 variable could be used uninitialized so going
ahead and giving it a default value.

Otherwise we leak stack memory to the network.

Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/hfi1/rc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c
index e1cf0c08ca6f..84c6a6ff4a67 100644
--- a/drivers/infiniband/hw/hfi1/rc.c
+++ b/drivers/infiniband/hw/hfi1/rc.c
@@ -815,7 +815,7 @@ static inline void hfi1_make_rc_ack_16B(struct rvt_qp *qp,
 	struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
 	struct hfi1_16b_header *hdr = &opa_hdr->opah;
 	struct ib_other_headers *ohdr;
-	u32 bth0, bth1;
+	u32 bth0, bth1 = 0;
 	u16 len, pkey;
 	u8 becn = !!is_fecn;
 	u8 l4 = OPA_16B_L4_IB_LOCAL;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 030/100] KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner

[Sasha Levin]

From: Marc Zyngier <marc.zyngier@arm.com>

[ Upstream commit 7465894e90e5a47e0e52aa5f1f708653fc40020f ]

vgic_set_owner acquires the irq lock without disabling interrupts,
resulting in a lockdep splat (an interrupt could fire and result
in the same lock being taken if the same virtual irq is to be
injected).

In practice, it is almost impossible to trigger this bug, but
better safe than sorry. Convert the lock acquisition to a
spin_lock_irqsave() and keep lockdep happy.

Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 virt/kvm/arm/vgic/vgic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
index fed717e07938..da53c6e7d688 100644
--- a/virt/kvm/arm/vgic/vgic.c
+++ b/virt/kvm/arm/vgic/vgic.c
@@ -454,6 +454,7 @@ int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int virt_irq)
 int kvm_vgic_set_owner(struct kvm_vcpu *vcpu, unsigned int intid, void *owner)
 {
 	struct vgic_irq *irq;
+	unsigned long flags;
 	int ret = 0;
 
 	if (!vgic_initialized(vcpu->kvm))
@@ -464,12 +465,12 @@ int kvm_vgic_set_owner(struct kvm_vcpu *vcpu, unsigned int intid, void *owner)
 		return -EINVAL;
 
 	irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
-	spin_lock(&irq->irq_lock);
+	spin_lock_irqsave(&irq->irq_lock, flags);
 	if (irq->owner && irq->owner != owner)
 		ret = -EEXIST;
 	else
 		irq->owner = owner;
-	spin_unlock(&irq->irq_lock);
+	spin_unlock_irqrestore(&irq->irq_lock, flags);
 
 	return ret;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 031/100] i40iw: Allocate a sdbuf per CQP WQE

[Sasha Levin]

From: Chien Tin Tung <chien.tin.tung@intel.com>

[ Upstream commit 100d6de2ced538c539d923dc14a1b5cbae234503 ]

Currently there is only one sdbuf per Control QP (CQP) for
programming Segment Descriptor (SD). If multiple SD work
requests are posted simultaneously, the sdbuf is reused
by all WQEs and new WQEs can corrupt previous WQEs sdbuf
leading to incorrect SD programming.

Fix this by allocating one sdbuf per CQP SQ WQE. When an
SD command is posted, it will use the corresponding sdbuf
for the WQE.

Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 43 ++++++++++++++++++++++----------
 drivers/infiniband/hw/i40iw/i40iw_d.h    |  4 ++-
 2 files changed, 33 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
index 42ca5346777d..d86f3e670804 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
@@ -506,7 +506,7 @@ static enum i40iw_status_code i40iw_sc_cqp_create(struct i40iw_sc_cqp *cqp,
 
 	ret_code = i40iw_allocate_dma_mem(cqp->dev->hw,
 					  &cqp->sdbuf,
-					  128,
+					  I40IW_UPDATE_SD_BUF_SIZE * cqp->sq_size,
 					  I40IW_SD_BUF_ALIGNMENT);
 
 	if (ret_code)
@@ -589,14 +589,15 @@ void i40iw_sc_cqp_post_sq(struct i40iw_sc_cqp *cqp)
 }
 
 /**
- * i40iw_sc_cqp_get_next_send_wqe - get next wqe on cqp sq
- * @cqp: struct for cqp hw
- * @wqe_idx: we index of cqp ring
+ * i40iw_sc_cqp_get_next_send_wqe_idx - get next WQE on CQP SQ and pass back the index
+ * @cqp: pointer to CQP structure
+ * @scratch: private data for CQP WQE
+ * @wqe_idx: WQE index for next WQE on CQP SQ
  */
-u64 *i40iw_sc_cqp_get_next_send_wqe(struct i40iw_sc_cqp *cqp, u64 scratch)
+static u64 *i40iw_sc_cqp_get_next_send_wqe_idx(struct i40iw_sc_cqp *cqp,
+					       u64 scratch, u32 *wqe_idx)
 {
 	u64 *wqe = NULL;
-	u32	wqe_idx;
 	enum i40iw_status_code ret_code;
 
 	if (I40IW_RING_FULL_ERR(cqp->sq_ring)) {
@@ -609,21 +610,33 @@ u64 *i40iw_sc_cqp_get_next_send_wqe(struct i40iw_sc_cqp *cqp, u64 scratch)
 			    cqp->sq_ring.size);
 		return NULL;
 	}
-	I40IW_ATOMIC_RING_MOVE_HEAD(cqp->sq_ring, wqe_idx, ret_code);
+	I40IW_ATOMIC_RING_MOVE_HEAD(cqp->sq_ring, *wqe_idx, ret_code);
 	cqp->dev->cqp_cmd_stats[OP_REQUESTED_COMMANDS]++;
 	if (ret_code)
 		return NULL;
-	if (!wqe_idx)
+	if (!*wqe_idx)
 		cqp->polarity = !cqp->polarity;
 
-	wqe = cqp->sq_base[wqe_idx].elem;
-	cqp->scratch_array[wqe_idx] = scratch;
+	wqe = cqp->sq_base[*wqe_idx].elem;
+	cqp->scratch_array[*wqe_idx] = scratch;
 	I40IW_CQP_INIT_WQE(wqe);
 
 	return wqe;
 }
 
 /**
+ * i40iw_sc_cqp_get_next_send_wqe - get next wqe on cqp sq
+ * @cqp: struct for cqp hw
+ * @scratch: private data for CQP WQE
+ */
+u64 *i40iw_sc_cqp_get_next_send_wqe(struct i40iw_sc_cqp *cqp, u64 scratch)
+{
+	u32 wqe_idx;
+
+	return i40iw_sc_cqp_get_next_send_wqe_idx(cqp, scratch, &wqe_idx);
+}
+
+/**
  * i40iw_sc_cqp_destroy - destroy cqp during close
  * @cqp: struct for cqp hw
  */
@@ -3534,8 +3547,10 @@ static enum i40iw_status_code cqp_sds_wqe_fill(struct i40iw_sc_cqp *cqp,
 	u64 *wqe;
 	int mem_entries, wqe_entries;
 	struct i40iw_dma_mem *sdbuf = &cqp->sdbuf;
+	u64 offset;
+	u32 wqe_idx;
 
-	wqe = i40iw_sc_cqp_get_next_send_wqe(cqp, scratch);
+	wqe = i40iw_sc_cqp_get_next_send_wqe_idx(cqp, scratch, &wqe_idx);
 	if (!wqe)
 		return I40IW_ERR_RING_FULL;
 
@@ -3548,8 +3563,10 @@ static enum i40iw_status_code cqp_sds_wqe_fill(struct i40iw_sc_cqp *cqp,
 		 LS_64(mem_entries, I40IW_CQPSQ_UPESD_ENTRY_COUNT);
 
 	if (mem_entries) {
-		memcpy(sdbuf->va, &info->entry[3], (mem_entries << 4));
-		data = sdbuf->pa;
+		offset = wqe_idx * I40IW_UPDATE_SD_BUF_SIZE;
+		memcpy((char *)sdbuf->va + offset, &info->entry[3],
+		       mem_entries << 4);
+		data = (u64)sdbuf->pa + offset;
 	} else {
 		data = 0;
 	}
diff --git a/drivers/infiniband/hw/i40iw/i40iw_d.h b/drivers/infiniband/hw/i40iw/i40iw_d.h
index 2ebaadbed379..e191fa54ef62 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_d.h
+++ b/drivers/infiniband/hw/i40iw/i40iw_d.h
@@ -1516,7 +1516,7 @@ enum i40iw_alignment {
 	I40IW_AEQ_ALIGNMENT =		0x100,
 	I40IW_CEQ_ALIGNMENT =		0x100,
 	I40IW_CQ0_ALIGNMENT =		0x100,
-	I40IW_SD_BUF_ALIGNMENT =	0x100
+	I40IW_SD_BUF_ALIGNMENT =	0x80
 };
 
 #define I40IW_WQE_SIZE_64	64
@@ -1524,6 +1524,8 @@ enum i40iw_alignment {
 #define I40IW_QP_WQE_MIN_SIZE	32
 #define I40IW_QP_WQE_MAX_SIZE	128
 
+#define I40IW_UPDATE_SD_BUF_SIZE 128
+
 #define I40IW_CQE_QTYPE_RQ 0
 #define I40IW_CQE_QTYPE_SQ 1
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 032/100] i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE

[Sasha Levin]

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit 10499986dbd8778e1acf9f9d2e166800dfee44b4 ]

When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and
it should not be freed as one in i40iw_schedule_cm_timer().

Fixes: f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 5230dd3c938c..d6a1a308c6a0 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -1043,7 +1043,7 @@ static int i40iw_parse_mpa(struct i40iw_cm_node *cm_node, u8 *buffer, u32 *type,
  * i40iw_schedule_cm_timer
  * @@cm_node: connection's node
  * @sqbuf: buffer to send
- * @type: if it es send ot close
+ * @type: if it is send or close
  * @send_retrans: if rexmits to be done
  * @close_when_complete: is cm_node to be removed
  *
@@ -1067,7 +1067,8 @@ int i40iw_schedule_cm_timer(struct i40iw_cm_node *cm_node,
 
 	new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC);
 	if (!new_send) {
-		i40iw_free_sqbuf(vsi, (void *)sqbuf);
+		if (type != I40IW_TIMER_TYPE_CLOSE)
+			i40iw_free_sqbuf(vsi, (void *)sqbuf);
 		return -ENOMEM;
 	}
 	new_send->retrycount = I40IW_DEFAULT_RETRYS;
@@ -1082,7 +1083,6 @@ int i40iw_schedule_cm_timer(struct i40iw_cm_node *cm_node,
 		new_send->timetosend += (HZ / 10);
 		if (cm_node->close_entry) {
 			kfree(new_send);
-			i40iw_free_sqbuf(vsi, (void *)sqbuf);
 			i40iw_pr_err("already close entry\n");
 			return -EINVAL;
 		}
-- 
2.11.0

[PATCH AUTOSEL for 4.14 033/100] i40iw: Correct ARP index mask

[Sasha Levin]

From: Mustafa Ismail <mustafa.ismail@intel.com>

[ Upstream commit a283cdc4d3670700182c820b59078387f9a01a30 ]

The ARP table entry indexes are aliased to 12bits
instead of the intended 16bits when uploaded to
the QP Context. This will present an issue when the
number of connections exceeds 4096 as ARP entries are
reused. Fix this by adjusting the mask to account for
the full 16bits.

Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/i40iw/i40iw_d.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_d.h b/drivers/infiniband/hw/i40iw/i40iw_d.h
index e191fa54ef62..24eabcad5e40 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_d.h
+++ b/drivers/infiniband/hw/i40iw/i40iw_d.h
@@ -1109,7 +1109,7 @@
 #define I40IWQPC_VLANTAG_MASK (0xffffULL << I40IWQPC_VLANTAG_SHIFT)
 
 #define I40IWQPC_ARPIDX_SHIFT 48
-#define I40IWQPC_ARPIDX_MASK (0xfffULL << I40IWQPC_ARPIDX_SHIFT)
+#define I40IWQPC_ARPIDX_MASK (0xffffULL << I40IWQPC_ARPIDX_SHIFT)
 
 #define I40IWQPC_FLOWLABEL_SHIFT 0
 #define I40IWQPC_FLOWLABEL_MASK (0xfffffUL << I40IWQPC_FLOWLABEL_SHIFT)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 034/100] RDMA/cma: Make sure that PSN is not over max allowed

[Sasha Levin]

From: Moni Shoua <monis@mellanox.com>

[ Upstream commit 23a9cd2ad90543e9da3786878d2b2729c095439d ]

This patch limits the initial value for PSN to 24 bits as
spec requires.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index fa79c7076ccd..09063f0d86d2 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -801,6 +801,7 @@ struct rdma_cm_id *rdma_create_id(struct net *net,
 	INIT_LIST_HEAD(&id_priv->mc_list);
 	get_random_bytes(&id_priv->seq_num, sizeof id_priv->seq_num);
 	id_priv->id.route.addr.dev_addr.net = get_net(net);
+	id_priv->seq_num &= 0x00ffffff;
 
 	return &id_priv->id;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 036/100] md/raid5: correct degraded calculation in raid5_error

[Sasha Levin]

From: bingjingc <bingjingc@synology.com>

[ Upstream commit aff69d89bdebc39235cddb4445371eb979b49685 ]

When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).

mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure

cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.

However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.

Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c406f16f5295..7ec822ced80b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2678,13 +2678,13 @@ static void raid5_error(struct mddev *mddev, struct md_rdev *rdev)
 	pr_debug("raid456: error called\n");
 
 	spin_lock_irqsave(&conf->device_lock, flags);
+	set_bit(Faulty, &rdev->flags);
 	clear_bit(In_sync, &rdev->flags);
 	mddev->degraded = raid5_calc_degraded(conf);
 	spin_unlock_irqrestore(&conf->device_lock, flags);
 	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 
 	set_bit(Blocked, &rdev->flags);
-	set_bit(Faulty, &rdev->flags);
 	set_mask_bits(&mddev->sb_flags, 0,
 		      BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
 	pr_crit("md/raid:%s: Disk failure on %s, disabling device.\n"
-- 
2.11.0

[PATCH AUTOSEL for 4.14 035/100] IB/core: Init subsys if compiled to vmlinuz-core

[Sasha Levin]

From: Dmitry Monakhov <dmonakhov@openvz.org>

[ Upstream commit a9cd1a673737dd81332fce1145801bfacfb90d90 ]

Once infiniband is compiled as a core component its subsystem must be
enabled before device initialization. Otherwise there is a NULL pointer
dereference during mlx4_core init, calltrace:
->device_add
  if (dev->class) {
     deref  dev->class->p =>NULLPTR

#Config
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
CONFIG_MLX4_EN=y

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 84fc32a2c8b3..5e1be4949d5f 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1253,5 +1253,5 @@ static void __exit ib_core_cleanup(void)
 
 MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_LS, 4);
 
-module_init(ib_core_init);
+subsys_initcall(ib_core_init);
 module_exit(ib_core_cleanup);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 037/100] sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit d30fc5126efb0c33b7adf5966d3051db2c3d7721 ]

Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.

However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.

It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.

This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.

Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sctp/outqueue.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 2966ff400755..39ac91060bc2 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -368,7 +368,8 @@ static int sctp_prsctp_prune_sent(struct sctp_association *asoc,
 		asoc->abandoned_sent[SCTP_PR_INDEX(PRIO)]++;
 		streamout->abandoned_sent[SCTP_PR_INDEX(PRIO)]++;
 
-		if (!chk->tsn_gap_acked) {
+		if (queue != &asoc->outqueue.retransmit &&
+		    !chk->tsn_gap_acked) {
 			if (chk->transport)
 				chk->transport->flight_size -=
 						sctp_data_size(chk);
@@ -1429,7 +1430,8 @@ static void sctp_check_transmitted(struct sctp_outq *q,
 			/* If this chunk has not been acked, stop
 			 * considering it as 'outstanding'.
 			 */
-			if (!tchunk->tsn_gap_acked) {
+			if (transmitted_queue != &q->retransmit &&
+			    !tchunk->tsn_gap_acked) {
 				if (tchunk->transport)
 					tchunk->transport->flight_size -=
 							sctp_data_size(tchunk);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 039/100] phylink: ensure we take the link down when phylink_stop() is called

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 2012b7d6b2868c532f22d9172c8b24611637eb48 ]

Ensure that we tell the MAC to take the link down when phylink_stop()
is called, and that this completes prior to phylink_stop() returns.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/phylink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index cb85307f125b..1b2fe74a44ea 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -772,6 +772,7 @@ void phylink_stop(struct phylink *pl)
 		sfp_upstream_stop(pl->sfp_bus);
 
 	set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+	queue_work(system_power_efficient_wq, &pl->resolve);
 	flush_work(&pl->resolve);
 }
 EXPORT_SYMBOL_GPL(phylink_stop);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 038/100] sfp: fix RX_LOS signal handling

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit acf1c02f023926b8b04672a9e81b1711ae681619 ]

The options word is a be16 quantity, so we need to test the flags
having converted the endian-ness.  Convert the flag bits to be16,
which can be optimised by the compiler, rather than converting a
variable at runtime.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/sfp.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index baee371bf767..8bf10aba7452 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -358,7 +358,7 @@ static void sfp_sm_link_check_los(struct sfp *sfp)
 	 * SFP_OPTIONS_LOS_NORMAL are set?  For now, we assume
 	 * the same as SFP_OPTIONS_LOS_NORMAL set.
 	 */
-	if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED)
+	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED))
 		los ^= SFP_F_LOS;
 
 	if (los)
@@ -583,7 +583,8 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event)
 		if (event == SFP_E_TX_FAULT)
 			sfp_sm_fault(sfp, true);
 		else if (event ==
-			 (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
+			 (sfp->id.ext.options &
+			  cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) ?
 			  SFP_E_LOS_HIGH : SFP_E_LOS_LOW))
 			sfp_sm_link_up(sfp);
 		break;
@@ -593,7 +594,8 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event)
 			sfp_sm_link_down(sfp);
 			sfp_sm_fault(sfp, true);
 		} else if (event ==
-			   (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
+			   (sfp->id.ext.options &
+			    cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) ?
 			    SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) {
 			sfp_sm_link_down(sfp);
 			sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 041/100] iio: proximity: sx9500: Assign interrupt from GpioIo()

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit e53111ad5deaef98d8c18a9933ef1f5624c5979d ]

The commit 0f0796509c07

("iio: remove gpio interrupt probing from drivers that use a single interrupt")

removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.

Partially revert the commit 0f0796509c07 to restore original behaviour.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/proximity/sx9500.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index f42b3a1c75ff..dba796c06ba6 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -871,6 +871,7 @@ static int sx9500_init_device(struct iio_dev *indio_dev)
 static void sx9500_gpio_probe(struct i2c_client *client,
 			      struct sx9500_data *data)
 {
+	struct gpio_desc *gpiod_int;
 	struct device *dev;
 
 	if (!client)
@@ -878,6 +879,14 @@ static void sx9500_gpio_probe(struct i2c_client *client,
 
 	dev = &client->dev;
 
+	if (client->irq <= 0) {
+		gpiod_int = devm_gpiod_get(dev, SX9500_GPIO_INT, GPIOD_IN);
+		if (IS_ERR(gpiod_int))
+			dev_err(dev, "gpio get irq failed\n");
+		else
+			client->irq = gpiod_to_irq(gpiod_int);
+	}
+
 	data->gpiod_rst = devm_gpiod_get(dev, SX9500_GPIO_RESET, GPIOD_OUT_HIGH);
 	if (IS_ERR(data->gpiod_rst)) {
 		dev_warn(dev, "gpio get reset pin failed\n");
-- 
2.11.0

[PATCH AUTOSEL for 4.14 040/100] md/raid1/10: add missed blk plug

[Sasha Levin]

From: Shaohua Li <shli@fb.com>

[ Upstream commit 18022a1bd3709b74ca31ef0b28fccd52bcd6c504 ]

flush_pending_writes isn't always called with block plug, so add it, and plug
works in nested way.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid1.c  | 4 ++++
 drivers/md/raid10.c | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5a8216b50e38..788fc0800465 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -810,11 +810,15 @@ static void flush_pending_writes(struct r1conf *conf)
 	spin_lock_irq(&conf->device_lock);
 
 	if (conf->pending_bio_list.head) {
+		struct blk_plug plug;
 		struct bio *bio;
+
 		bio = bio_list_get(&conf->pending_bio_list);
 		conf->pending_count = 0;
 		spin_unlock_irq(&conf->device_lock);
+		blk_start_plug(&plug);
 		flush_bio_list(conf, bio);
+		blk_finish_plug(&plug);
 	} else
 		spin_unlock_irq(&conf->device_lock);
 }
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 374df5796649..0d18d3b95201 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -890,10 +890,13 @@ static void flush_pending_writes(struct r10conf *conf)
 	spin_lock_irq(&conf->device_lock);
 
 	if (conf->pending_bio_list.head) {
+		struct blk_plug plug;
 		struct bio *bio;
+
 		bio = bio_list_get(&conf->pending_bio_list);
 		conf->pending_count = 0;
 		spin_unlock_irq(&conf->device_lock);
+		blk_start_plug(&plug);
 		/* flush any pending bitmap writes to disk
 		 * before proceeding w/ I/O */
 		bitmap_unplug(conf->mddev->bitmap);
@@ -914,6 +917,7 @@ static void flush_pending_writes(struct r10conf *conf)
 				generic_make_request(bio);
 			bio = next;
 		}
+		blk_finish_plug(&plug);
 	} else
 		spin_unlock_irq(&conf->device_lock);
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 042/100] iio: fix kernel-doc build errors

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c175cb7cd953782bbf4e8bdf088ad61440d6dde5 ]

Fix build errors in kernel-doc notation. Symbols that end in '_'
have a special meaning, but adding a '*' makes them OK.

../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val".
../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/industrialio-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index a47428b4d31b..e565fd4fc414 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -631,7 +631,7 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
  * iio_format_value() - Formats a IIO value into its string representation
  * @buf:	The buffer to which the formatted value gets written
  *		which is assumed to be big enough (i.e. PAGE_SIZE).
- * @type:	One of the IIO_VAL_... constants. This decides how the val
+ * @type:	One of the IIO_VAL_* constants. This decides how the val
  *		and val2 parameters are formatted.
  * @size:	Number of IIO value entries contained in vals
  * @vals:	Pointer to the values, exact meaning depends on the
@@ -639,7 +639,7 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
  *
  * Return: 0 by default, a negative number on failure or the
  *	   total number of characters written for a type that belongs
- *	   to the IIO_VAL_... constant.
+ *	   to the IIO_VAL_* constant.
  */
 ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
 {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 044/100] bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown

[Sasha Levin]

From: Ray Jui <ray.jui@broadcom.com>

[ Upstream commit a7f3f939dd7d8398acebecd1ceb2e9e7ffbe91d2 ]

The current 'bnxt_shutdown' implementation only invokes
'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in
the path of power off (SYSTEM_POWER_OFF). While this may work in most
cases, it does not work in the smart NIC case, when Linux 'reboot'
command is initiated from the Linux that runs on the ARM cores of the
NIC card. In this particular case, Linux 'reboot' results in a system
'L3' level reset where the entire ARM and associated subsystems are
being reset, but at the same time, Nitro core is being kept in sane state
(to allow external PCIe connected servers to continue to work). Without
properly shutting down RoCE and freeing all associated resources, it
results in the ARM core to hang immediately after the 'reboot'

By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the
above issue

Fixes: 0efd2fc65c92 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.")

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index aa764c5e3c6b..b66689a6eac0 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8218,8 +8218,9 @@ static void bnxt_shutdown(struct pci_dev *pdev)
 	if (netif_running(dev))
 		dev_close(dev);
 
+	bnxt_ulp_shutdown(bp);
+
 	if (system_state == SYSTEM_POWER_OFF) {
-		bnxt_ulp_shutdown(bp);
 		bnxt_clear_int_mode(bp);
 		pci_wake_from_d3(pdev, bp->wol);
 		pci_set_power_state(pdev, PCI_D3hot);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 043/100] scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ]

My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!

The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:

/**
 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
 * bus layer usage.
 */

which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.

Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.

Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/kernel-doc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 9d3eafea58f0..94dce2233503 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -3218,4 +3218,4 @@ if ($verbose && $warnings) {
   print STDERR "$warnings warnings\n";
 }
 
-exit($errors);
+exit($output_mode eq "none" ? 0 : $errors);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 045/100] ipvlan: Add the skb->mark as flow4's member to lookup route

[Sasha Levin]

From: Gao Feng <gfree.wind@vip.163.com>

[ Upstream commit a98a4ebc8c61d20f0150d6be66e0e65223a347af ]

Current codes don't use skb->mark to assign flowi4_mark, it would
make the policy route rule with fwmark doesn't work as expected.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ipvlan/ipvlan_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index 8feb84fd4ca7..c23dea48ad0f 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -375,6 +375,7 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb)
 		.flowi4_oif = dev->ifindex,
 		.flowi4_tos = RT_TOS(ip4h->tos),
 		.flowi4_flags = FLOWI_FLAG_ANYSRC,
+		.flowi4_mark = skb->mark,
 		.daddr = ip4h->daddr,
 		.saddr = ip4h->saddr,
 	};
-- 
2.11.0

[PATCH AUTOSEL for 4.14 046/100] m68k: add missing SOFTIRQENTRY_TEXT linker section

[Sasha Levin]

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit 969de0988b77e5a57aac2f7270191a3c50540c52 ]

Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.

However commit 229a71860547 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:

  LD      vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]

To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/m68k/kernel/vmlinux-nommu.lds | 2 ++
 arch/m68k/kernel/vmlinux-std.lds   | 2 ++
 arch/m68k/kernel/vmlinux-sun3.lds  | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 3aa571a513b5..cf6edda38971 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -45,6 +45,8 @@ SECTIONS {
 	.text : {
 		HEAD_TEXT
 		TEXT_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		SCHED_TEXT
 		CPUIDLE_TEXT
 		LOCK_TEXT
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 89172b8974b9..625a5785804f 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -16,6 +16,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	CPUIDLE_TEXT
 	LOCK_TEXT
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 293990efc917..9868270b0984 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -16,6 +16,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	CPUIDLE_TEXT
 	LOCK_TEXT
-- 
2.11.0

[PATCH AUTOSEL for 4.14 047/100] powerpc/perf: Fix oops when grouping different pmu events

[Sasha Levin]

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>

[ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ]

When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:

    Faulting instruction address: 0x00000000
    [link register   ] c00000000010ce88 power_check_constraints+0x128/0x980
    ...
    c00000000010e238 power_pmu_event_init+0x268/0x6f0
    c0000000002dc60c perf_try_init_event+0xdc/0x1a0
    c0000000002dce88 perf_event_alloc+0x7b8/0xac0
    c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
    c00000000000b004 system_call+0x38/0xe0

'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.

Consider only those events which belongs to 'perf_hw_context' in
collect_events().

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/perf/core-book3s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index b4209a68b85d..fce545774d50 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1419,7 +1419,7 @@ static int collect_events(struct perf_event *group, int max_count,
 	int n = 0;
 	struct perf_event *event;
 
-	if (!is_software_event(group)) {
+	if (group->pmu->task_ctx_nr == perf_hw_context) {
 		if (n >= max_count)
 			return -1;
 		ctrs[n] = group;
@@ -1427,7 +1427,7 @@ static int collect_events(struct perf_event *group, int max_count,
 		events[n++] = group->hw.config;
 	}
 	list_for_each_entry(event, &group->sibling_list, group_entry) {
-		if (!is_software_event(event) &&
+		if (event->pmu->task_ctx_nr == perf_hw_context &&
 		    event->state != PERF_EVENT_STATE_OFF) {
 			if (n >= max_count)
 				return -1;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 048/100] PM / runtime: Fix handling of suppliers with disabled runtime PM

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 31eb7431805493e10f4731f366cf4d4e3e952035 ]

Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).

Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/power/runtime.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 7bcf80fa9ada..b2b1eece0db1 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -276,7 +276,8 @@ static int rpm_get_suppliers(struct device *dev)
 			continue;
 
 		retval = pm_runtime_get_sync(link->supplier);
-		if (retval < 0) {
+		/* Ignore suppliers with disabled runtime PM. */
+		if (retval < 0 && retval != -EACCES) {
 			pm_runtime_put_noidle(link->supplier);
 			return retval;
 		}
-- 
2.11.0

[PATCH AUTOSEL for 4.14 049/100] s390/virtio: add BSD license to virtio-ccw

[Sasha Levin]

From: "Michael S. Tsirkin" <mst@redhat.com>

[ Upstream commit edfb8d8fcb94a75b2e61c63549d4a5f6474ad3d2 ]

The original intent of the virtio header relicensing
from 2008 was to make sure anyone can implement compatible
devices/drivers. The virtio-ccw was omitted by mistake.

We have an ack from the only contributor as well as the
maintainer from IBM, so it's not too late to fix that.

Make it dual-licensed with GPLv2, as the whole kernel is GPL2.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/include/uapi/asm/virtio-ccw.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/include/uapi/asm/virtio-ccw.h b/arch/s390/include/uapi/asm/virtio-ccw.h
index 967aad390105..9e62587d9472 100644
--- a/arch/s390/include/uapi/asm/virtio-ccw.h
+++ b/arch/s390/include/uapi/asm/virtio-ccw.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
 /*
  * Definitions for virtio-ccw devices.
  *
-- 
2.11.0

[PATCH AUTOSEL for 4.14 050/100] s390/dasd: prevent prefix I/O error

[Sasha Levin]

From: Stefan Haberland <sth@linux.vnet.ibm.com>

[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/s390/block/dasd_eckd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 8eafcd5fa004..5ede251c52ca 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -530,10 +530,12 @@ static int prefix_LRE(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
 	pfxdata->validity.define_extent = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
-	if (startpriv->uid.type != UA_BASE_DEVICE) {
+	if (startpriv->uid.type == UA_BASE_PAV_ALIAS)
 		pfxdata->validity.verify_base = 1;
-		if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
-			pfxdata->validity.hyper_pav = 1;
+
+	if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) {
+		pfxdata->validity.verify_base = 1;
+		pfxdata->validity.hyper_pav = 1;
 	}
 
 	rc = define_extent(NULL, dedata, trk, totrk, cmd, basedev, blksize);
@@ -3414,10 +3416,12 @@ static int prepare_itcw(struct itcw *itcw,
 	pfxdata.validity.define_extent = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
-	if (startpriv->uid.type != UA_BASE_DEVICE) {
+	if (startpriv->uid.type == UA_BASE_PAV_ALIAS)
+		pfxdata.validity.verify_base = 1;
+
+	if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) {
 		pfxdata.validity.verify_base = 1;
-		if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
-			pfxdata.validity.hyper_pav = 1;
+		pfxdata.validity.hyper_pav = 1;
 	}
 
 	switch (cmd) {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 051/100] ARM: dts: Fix elm interrupt compiler warning

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ]

Looks like the interrupt property is missing the controller and level
information causing:

Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/omap4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 1bcf66ec209f..28d10abd8b04 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -354,7 +354,7 @@
 		elm: elm@48078000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48078000 0x2000>;
-			interrupts = <4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "elm";
 			status = "disabled";
 		};
-- 
2.11.0

[PATCH AUTOSEL for 4.14 052/100] nfp: fix port stats for mac representors

[Sasha Levin]

From: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>

[ Upstream commit 42d779ffc186f6dd26271fc60a7417cb51aca93e ]

Previously we swapped the tx_packets, tx_bytes and tx_dropped counters
with rx_packets, rx_bytes and rx_dropped counters, respectively. This
behaviour is correct and expected for VF representors but it should not
be swapped for physical port mac representors.

Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_repr.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_repr.c b/drivers/net/ethernet/netronome/nfp/nfp_net_repr.c
index 1c43aca8162d..9a7655560629 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_repr.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_repr.c
@@ -84,16 +84,13 @@ nfp_repr_phy_port_get_stats64(struct nfp_port *port,
 {
 	u8 __iomem *mem = port->eth_stats;
 
-	/* TX and RX stats are flipped as we are returning the stats as seen
-	 * at the switch port corresponding to the phys port.
-	 */
-	stats->tx_packets = readq(mem + NFP_MAC_STATS_RX_FRAMES_RECEIVED_OK);
-	stats->tx_bytes = readq(mem + NFP_MAC_STATS_RX_IN_OCTETS);
-	stats->tx_dropped = readq(mem + NFP_MAC_STATS_RX_IN_ERRORS);
+	stats->tx_packets = readq(mem + NFP_MAC_STATS_TX_FRAMES_TRANSMITTED_OK);
+	stats->tx_bytes = readq(mem + NFP_MAC_STATS_TX_OUT_OCTETS);
+	stats->tx_dropped = readq(mem + NFP_MAC_STATS_TX_OUT_ERRORS);
 
-	stats->rx_packets = readq(mem + NFP_MAC_STATS_TX_FRAMES_TRANSMITTED_OK);
-	stats->rx_bytes = readq(mem + NFP_MAC_STATS_TX_OUT_OCTETS);
-	stats->rx_dropped = readq(mem + NFP_MAC_STATS_TX_OUT_ERRORS);
+	stats->rx_packets = readq(mem + NFP_MAC_STATS_RX_FRAMES_RECEIVED_OK);
+	stats->rx_bytes = readq(mem + NFP_MAC_STATS_RX_IN_OCTETS);
+	stats->rx_dropped = readq(mem + NFP_MAC_STATS_RX_IN_ERRORS);
 }
 
 static void
-- 
2.11.0

[PATCH AUTOSEL for 4.14 053/100] gianfar: fix a flooded alignment reports because of padding issue.

[Sasha Levin]

From: Zumeng Chen <zumeng.chen@gmail.com>

[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/gianfar.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 5be52d89b182..81a73af0df31 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1378,9 +1378,11 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	gfar_init_addr_hash_table(priv);
 
-	/* Insert receive time stamps into padding alignment bytes */
+	/* Insert receive time stamps into padding alignment bytes, and
+	 * plus 2 bytes padding to ensure the cpu alignment.
+	 */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
-		priv->padding = 8;
+		priv->padding = 8 + DEFAULT_PADDING;
 
 	if (dev->features & NETIF_F_IP_CSUM ||
 	    priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 054/100] net_sched: red: Avoid devision by zero

[Sasha Levin]

From: Nogah Frankel <nogahf@mellanox.com>

[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ]

Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/net/red.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/red.h b/include/net/red.h
index 9a9347710701..5918f78d36a0 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -179,7 +179,7 @@ static inline void red_set_parms(struct red_parms *p,
 	p->qth_max	= qth_max << Wlog;
 	p->Wlog		= Wlog;
 	p->Plog		= Plog;
-	if (delta < 0)
+	if (delta <= 0)
 		delta = 1;
 	p->qth_delta	= delta;
 	if (!max_P) {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 055/100] net_sched: red: Avoid illegal values

[Sasha Levin]

From: Nogah Frankel <nogahf@mellanox.com>

[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ]

Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/net/red.h     | 11 +++++++++++
 net/sched/sch_choke.c |  3 +++
 net/sched/sch_gred.c  |  3 +++
 net/sched/sch_red.c   |  2 ++
 net/sched/sch_sfq.c   |  3 +++
 5 files changed, 22 insertions(+)

diff --git a/include/net/red.h b/include/net/red.h
index 5918f78d36a0..9665582c4687 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -168,6 +168,17 @@ static inline void red_set_vars(struct red_vars *v)
 	v->qcount	= -1;
 }
 
+static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog)
+{
+	if (fls(qth_min) + Wlog > 32)
+		return false;
+	if (fls(qth_max) + Wlog > 32)
+		return false;
+	if (qth_max < qth_min)
+		return false;
+	return true;
+}
+
 static inline void red_set_parms(struct red_parms *p,
 				 u32 qth_min, u32 qth_max, u8 Wlog, u8 Plog,
 				 u8 Scell_log, u8 *stab, u32 max_P)
diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c
index b30a2c70bd48..531250fceb9e 100644
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -369,6 +369,9 @@ static int choke_change(struct Qdisc *sch, struct nlattr *opt)
 
 	ctl = nla_data(tb[TCA_CHOKE_PARMS]);
 
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
+
 	if (ctl->limit > CHOKE_MAX_QUEUE)
 		return -EINVAL;
 
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index 17c7130454bd..bc30f9186ac6 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -356,6 +356,9 @@ static inline int gred_change_vq(struct Qdisc *sch, int dp,
 	struct gred_sched *table = qdisc_priv(sch);
 	struct gred_sched_data *q = table->tab[dp];
 
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
+
 	if (!q) {
 		table->tab[dp] = q = *prealloc;
 		*prealloc = NULL;
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 93b9d70a9b28..d87c41e82917 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -184,6 +184,8 @@ static int red_change(struct Qdisc *sch, struct nlattr *opt)
 	max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0;
 
 	ctl = nla_data(tb[TCA_RED_PARMS]);
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
 
 	if (ctl->limit > 0) {
 		child = fifo_create_dflt(sch, &bfifo_qdisc_ops, ctl->limit);
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 74ea863b8240..3fbf20126045 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -637,6 +637,9 @@ static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
 	if (ctl->divisor &&
 	    (!is_power_of_2(ctl->divisor) || ctl->divisor > 65536))
 		return -EINVAL;
+	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
+					ctl_v1->Wlog))
+		return -EINVAL;
 	if (ctl_v1 && ctl_v1->qth_min) {
 		p = kmalloc(sizeof(*p), GFP_KERNEL);
 		if (!p)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 056/100] VSOCK: fix outdated sk_state value in hvs_release()

[Sasha Levin]

From: Stefan Hajnoczi <stefanha@redhat.com>

[ Upstream commit c9d3fe9da094a9a7a3d3cd365b334b822e05f5e8 ]

Since commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 ("VSOCK: use TCP
state constants for sk_state") VSOCK has used TCP_* constants for
sk_state.

Commit b4562ca7925a3bedada87a3dd072dd5bad043288 ("hv_sock: add locking
in the open/close/release code paths") reintroduced the SS_DISCONNECTING
constant.

This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING
constant.

CC: Dexuan Cui <decui@microsoft.com>
CC: Cathy Avery <cavery@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/vmw_vsock/hyperv_transport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/vmw_vsock/hyperv_transport.c b/net/vmw_vsock/hyperv_transport.c
index e21991fe883a..2c63f7b169b5 100644
--- a/net/vmw_vsock/hyperv_transport.c
+++ b/net/vmw_vsock/hyperv_transport.c
@@ -488,7 +488,7 @@ static void hvs_release(struct vsock_sock *vsk)
 
 	lock_sock(sk);
 
-	sk->sk_state = SS_DISCONNECTING;
+	sk->sk_state = TCP_CLOSING;
 	vsock_remove_sock(vsk);
 
 	release_sock(sk);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 057/100] KVM: VMX: fix page leak in hardware_setup()

[Sasha Levin]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit 2895db67b01cb875457c9c3f30a14723b6b5dfd5 ]

vmx_io_bitmap_b should not be allocated twice.

Fixes: 23611332938d ("KVM: VMX: refactor setup of global page-sized bitmaps")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kvm/vmx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ef16cf0f7cfd..a7a44270bf25 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6756,7 +6756,6 @@ static __init int hardware_setup(void)
 			goto out;
 	}
 
-	vmx_io_bitmap_b = (unsigned long *)__get_free_page(GFP_KERNEL);
 	memset(vmx_vmread_bitmap, 0xff, PAGE_SIZE);
 	memset(vmx_vmwrite_bitmap, 0xff, PAGE_SIZE);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 058/100] net: qualcomm: rmnet: Fix leak on transmit failure

[Sasha Levin]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

[ Upstream commit c20a548792f15f8d8e38cd74356301c6db0d241f ]

If a skb in transmit path does not have sufficient headroom to add
the map header, the skb is not sent out and is never freed.

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
index 540c7622dcb1..929fb8d96ec0 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
@@ -166,12 +166,12 @@ static int rmnet_map_egress_handler(struct sk_buff *skb,
 
 	if (skb_headroom(skb) < required_headroom) {
 		if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL))
-			return RMNET_MAP_CONSUMED;
+			goto fail;
 	}
 
 	map_header = rmnet_map_add_map_header(skb, additional_header_len, 0);
 	if (!map_header)
-		return RMNET_MAP_CONSUMED;
+		goto fail;
 
 	if (port->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
 		if (ep->mux_id == 0xff)
@@ -183,6 +183,10 @@ static int rmnet_map_egress_handler(struct sk_buff *skb,
 	skb->protocol = htons(ETH_P_MAP);
 
 	return RMNET_MAP_SUCCESS;
+
+fail:
+	kfree_skb(skb);
+	return RMNET_MAP_CONSUMED;
 }
 
 /* Ingress / Egress Entry Points */
-- 
2.11.0

[PATCH AUTOSEL for 4.14 059/100] dccp: CVE-2017-8824: use-after-free in DCCP code

[Sasha Levin]

From: Mohamed Ghannam <simo.ghannam@gmail.com>

[ Upstream commit 69c64866ce072dea1d1e59a0d61e0f66c0dffb76 ]

Whenever the sock object is in DCCP_CLOSED state,
dccp_disconnect() must free dccps_hc_tx_ccid and
dccps_hc_rx_ccid and set to NULL.

Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/dccp/proto.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index b68168fcc06a..9d43c1f40274 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -259,6 +259,7 @@ int dccp_disconnect(struct sock *sk, int flags)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct inet_sock *inet = inet_sk(sk);
+	struct dccp_sock *dp = dccp_sk(sk);
 	int err = 0;
 	const int old_state = sk->sk_state;
 
@@ -278,6 +279,10 @@ int dccp_disconnect(struct sock *sk, int flags)
 		sk->sk_err = ECONNRESET;
 
 	dccp_clear_xmit_timers(sk);
+	ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk);
+	ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk);
+	dp->dccps_hc_rx_ccid = NULL;
+	dp->dccps_hc_tx_ccid = NULL;
 
 	__skb_queue_purge(&sk->sk_receive_queue);
 	__skb_queue_purge(&sk->sk_write_queue);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 061/100] sched/wait: Fix add_wait_queue() behavioral change

[Sasha Levin]

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit c6b9d9a33029014446bd9ed84c1688f6d3d4eab9 ]

The following cleanup commit:

  50816c48997a ("sched/wait: Standardize internal naming of wait-queue entries")

... unintentionally changed the behavior of add_wait_queue() from
inserting the wait entry at the head of the wait queue to the tail
of the wait queue.

Beyond a negative performance impact this change in behavior
theoretically also breaks wait queues which mix exclusive and
non-exclusive waiters, as non-exclusive waiters will not be
woken up if they are queued behind enough exclusive waiters.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Fixes: ("sched/wait: Standardize internal naming of wait-queue entries")
Link: http://lkml.kernel.org/r/a16c8ccffd39bd08fdaa45a5192294c784b803a7.1512544324.git.osandov@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/sched/wait.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/wait.c b/kernel/sched/wait.c
index 98feab7933c7..929ecb7d6b78 100644
--- a/kernel/sched/wait.c
+++ b/kernel/sched/wait.c
@@ -27,7 +27,7 @@ void add_wait_queue(struct wait_queue_head *wq_head, struct wait_queue_entry *wq
 
 	wq_entry->flags &= ~WQ_FLAG_EXCLUSIVE;
 	spin_lock_irqsave(&wq_head->lock, flags);
-	__add_wait_queue_entry_tail(wq_head, wq_entry);
+	__add_wait_queue(wq_head, wq_entry);
 	spin_unlock_irqrestore(&wq_head->lock, flags);
 }
 EXPORT_SYMBOL(add_wait_queue);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 060/100] locking/lockdep: Fix possible NULL deref

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 5e351ad106997e06b2dc3da9c6b939b95f67fb88 ]

We can't invalidate xhlocks when we've not yet allocated any.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: f52be5708076 ("locking/lockdep: Untangle xhlock history save/restore from task independence")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/locking/lockdep.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index e36e652d996f..dae0d06422a1 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -4780,7 +4780,8 @@ void lockdep_invariant_state(bool force)
 	 * Verify the former, enforce the latter.
 	 */
 	WARN_ON_ONCE(!force && current->lockdep_depth);
-	invalidate_xhlock(&xhlock(current->xhlock_idx));
+	if (current->xhlocks)
+		invalidate_xhlock(&xhlock(current->xhlock_idx));
 }
 
 static int cross_lock(struct lockdep_map *lock)
-- 
2.11.0

[PATCH AUTOSEL for 4.14 062/100] btrfs: Fix quota reservation leak on preallocated files

[Sasha Levin]

From: Justin Maggard <jmaggard10@gmail.com>

[ Upstream commit b430b7751286b3acff2d324553c8cec4f1e87764 ]

Commit c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
changed the behavior of __btrfs_buffered_write() so that it first tries
to get a data space reservation, and then skips the relatively expensive
nocow check if the reservation succeeded.

If we have quotas enabled, the data space reservation also includes a
quota reservation.  But in the rewrite case, the space has already been
accounted for in qgroups.  So btrfs_check_data_free_space() increases
the quota reservation, but it never gets decreased when the data
actually gets written and overwrites the pre-existing data.  So we're
left with both the qgroup and qgroup reservation accounting for the same
space.

This commit adds the missing btrfs_qgroup_free_data() call in the case
of BTRFS_ORDERED_PREALLOC extents.

Fixes: c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d94e3f68b9b1..d7881ccf5310 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3006,6 +3006,8 @@ static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent)
 		compress_type = ordered_extent->compress_type;
 	if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
 		BUG_ON(compress_type);
+		btrfs_qgroup_free_data(inode, NULL, ordered_extent->file_offset,
+				       ordered_extent->len);
 		ret = btrfs_mark_extent_written(trans, BTRFS_I(inode),
 						ordered_extent->file_offset,
 						ordered_extent->file_offset +
-- 
2.11.0

[PATCH AUTOSEL for 4.14 063/100] Btrfs: disable FUA if mounted with nobarrier

[Sasha Levin]

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit 1b9e619c5bc8235cfba3dc4ced2fb0e3554a05d4 ]

I was seeing disk flushes still happening when I mounted a Btrfs
filesystem with nobarrier for testing. This is because we use FUA to
write out the first super block, and on devices without FUA support, the
block layer translates FUA to a flush. Even on devices supporting true
FUA, using FUA when we asked for no barriers is surprising.

Fixes: 387125fc722a8ed ("Btrfs: fix barrier flushes")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/disk-io.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index dfdab849037b..167ce43cabe8 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3391,6 +3391,7 @@ static int write_dev_supers(struct btrfs_device *device,
 	int errors = 0;
 	u32 crc;
 	u64 bytenr;
+	int op_flags;
 
 	if (max_mirrors == 0)
 		max_mirrors = BTRFS_SUPER_MIRROR_MAX;
@@ -3433,13 +3434,10 @@ static int write_dev_supers(struct btrfs_device *device,
 		 * we fua the first super.  The others we allow
 		 * to go down lazy.
 		 */
-		if (i == 0) {
-			ret = btrfsic_submit_bh(REQ_OP_WRITE,
-				REQ_SYNC | REQ_FUA | REQ_META | REQ_PRIO, bh);
-		} else {
-			ret = btrfsic_submit_bh(REQ_OP_WRITE,
-				REQ_SYNC | REQ_META | REQ_PRIO, bh);
-		}
+		op_flags = REQ_SYNC | REQ_META | REQ_PRIO;
+		if (i == 0 && !btrfs_test_opt(device->fs_info, NOBARRIER))
+			op_flags |= REQ_FUA;
+		ret = btrfsic_submit_bh(REQ_OP_WRITE, op_flags, bh);
 		if (ret)
 			errors++;
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.14 064/100] btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit c8bcbfbd239ed60a6562964b58034ac8a25f4c31 ]

The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.

Implications:

Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.

btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.

Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.

Before this patch the buffer was one byte larger, but then the -1 was
not added.

Fixes: ac8e9819d71f907 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 1f1338d52303..2763f3184ac5 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2221,7 +2221,7 @@ static noinline int btrfs_search_path_in_tree(struct btrfs_fs_info *info,
 	if (!path)
 		return -ENOMEM;
 
-	ptr = &name[BTRFS_INO_LOOKUP_PATH_MAX];
+	ptr = &name[BTRFS_INO_LOOKUP_PATH_MAX - 1];
 
 	key.objectid = tree_id;
 	key.type = BTRFS_ROOT_ITEM_KEY;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 065/100] brcmfmac: Avoid build error with make W=1

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 51ef7925e10688c57186d438e784532e063492e4 ]

When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.

  CC [M]  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed

Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index b3fa8ae80465..eccd25febfe6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -2064,7 +2064,7 @@ static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt)
 	return head_pad;
 }
 
-/**
+/*
  * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
  * bus layer usage.
  */
-- 
2.11.0

[PATCH AUTOSEL for 4.14 067/100] net: ethernet: arc: fix error handling in emac_rockchip_probe

[Sasha Levin]

From: Branislav Radocaj <branislav@radocaj.org>

[ Upstream commit e46772a6946a7d1f3fbbc1415871851d6651f1d4 ]

If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/arc/emac_rockchip.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index e278e3d96ee0..c6163874e4e7 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -220,9 +220,11 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 
 		/* RMII TX/RX needs always a rate of 25MHz */
 		err = clk_set_rate(priv->macclk, 25000000);
-		if (err)
+		if (err) {
 			dev_err(dev,
 				"failed to change mac clock rate (%d)\n", err);
+			goto out_clk_disable_macclk;
+		}
 	}
 
 	err = arc_emac_probe(ndev, interface);
@@ -232,7 +234,8 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-
+out_clk_disable_macclk:
+	clk_disable_unprepare(priv->macclk);
 out_regulator_disable:
 	if (priv->regulator)
 		regulator_disable(priv->regulator);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 066/100] virtio_net: fix return value check in receive_mergeable()

[Sasha Levin]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 03e9f8a05bce7330bcd9c5cc54c8e42d0fcbf993 ]

The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/virtio_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 511f8339fa96..7927e28f5336 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -714,7 +714,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
 		int num_skb_frags;
 
 		buf = virtqueue_get_buf_ctx(rq->vq, &len, &ctx);
-		if (unlikely(!ctx)) {
+		if (unlikely(!buf)) {
 			pr_debug("%s: rx error: %d buffers out of %d missing\n",
 				 dev->name, num_buf,
 				 virtio16_to_cpu(vi->vdev,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 069/100] net: dsa: mv88e6xxx: Unregister MDIO bus on error path

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 3126aeec5313565bfa19e2dd8fd7e3c3390514cb ]

The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 07704b372861..eebda5ec9676 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2153,6 +2153,19 @@ static const struct of_device_id mv88e6xxx_mdio_external_match[] = {
 	{ },
 };
 
+static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
+
+{
+	struct mv88e6xxx_mdio_bus *mdio_bus;
+	struct mii_bus *bus;
+
+	list_for_each_entry(mdio_bus, &chip->mdios, list) {
+		bus = mdio_bus->bus;
+
+		mdiobus_unregister(bus);
+	}
+}
+
 static int mv88e6xxx_mdios_register(struct mv88e6xxx_chip *chip,
 				    struct device_node *np)
 {
@@ -2177,27 +2190,16 @@ static int mv88e6xxx_mdios_register(struct mv88e6xxx_chip *chip,
 		match = of_match_node(mv88e6xxx_mdio_external_match, child);
 		if (match) {
 			err = mv88e6xxx_mdio_register(chip, child, true);
-			if (err)
+			if (err) {
+				mv88e6xxx_mdios_unregister(chip);
 				return err;
+			}
 		}
 	}
 
 	return 0;
 }
 
-static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
-
-{
-	struct mv88e6xxx_mdio_bus *mdio_bus;
-	struct mii_bus *bus;
-
-	list_for_each_entry(mdio_bus, &chip->mdios, list) {
-		bus = mdio_bus->bus;
-
-		mdiobus_unregister(bus);
-	}
-}
-
 static int mv88e6xxx_get_eeprom_len(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_chip *chip = ds->priv;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 068/100] net: dsa: mv88e6xxx: Fix interrupt masking on removal

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 3d5fdba1842bdd2eef29364c660558cb4cbb3fe0 ]

When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.

Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d74c7335c512..07704b372861 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -339,7 +339,7 @@ static void mv88e6xxx_g1_irq_free(struct mv88e6xxx_chip *chip)
 	u16 mask;
 
 	mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &mask);
-	mask |= GENMASK(chip->g1_irq.nirqs, 0);
+	mask &= ~GENMASK(chip->g1_irq.nirqs, 0);
 	mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, mask);
 
 	free_irq(chip->irq, chip);
@@ -395,7 +395,7 @@ static int mv88e6xxx_g1_irq_setup(struct mv88e6xxx_chip *chip)
 	return 0;
 
 out_disable:
-	mask |= GENMASK(chip->g1_irq.nirqs, 0);
+	mask &= ~GENMASK(chip->g1_irq.nirqs, 0);
 	mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, mask);
 
 out_mapping:
-- 
2.11.0

[PATCH AUTOSEL for 4.14 070/100] 509: fix printing uninitialized stack memory when OID is empty

[Sasha Levin]

From: Eric Biggers <ebiggers3@gmail.com>

[ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ]

Callers of sprint_oid() do not check its return value before printing
the result.  In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed.  Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 lib/oid_registry.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/lib/oid_registry.c b/lib/oid_registry.c
index 41b9e50711a7..b5f7d9986be1 100644
--- a/lib/oid_registry.c
+++ b/lib/oid_registry.c
@@ -116,7 +116,7 @@ int sprint_oid(const void *data, size_t datasize, char *buffer, size_t bufsize)
 	int count;
 
 	if (v >= end)
-		return -EBADMSG;
+		goto bad;
 
 	n = *v++;
 	ret = count = snprintf(buffer, bufsize, "%u.%u", n / 40, n % 40);
@@ -134,7 +134,7 @@ int sprint_oid(const void *data, size_t datasize, char *buffer, size_t bufsize)
 			num = n & 0x7f;
 			do {
 				if (v >= end)
-					return -EBADMSG;
+					goto bad;
 				n = *v++;
 				num <<= 7;
 				num |= n & 0x7f;
@@ -148,6 +148,10 @@ int sprint_oid(const void *data, size_t datasize, char *buffer, size_t bufsize)
 	}
 
 	return ret;
+
+bad:
+	snprintf(buffer, bufsize, "(bad)");
+	return -EBADMSG;
 }
 EXPORT_SYMBOL_GPL(sprint_oid);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 072/100] scsi: lpfc: Use after free in lpfc_rq_buf_free()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 9816ef6ecbc102b9bcbb1d83e12c7fb19924f38c ]

The error message dereferences "rqb_entry" so we need to print it first
and then free the buffer.

Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/lpfc/lpfc_mem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 56faeb049b4a..87c08ff37ddd 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -753,12 +753,12 @@ lpfc_rq_buf_free(struct lpfc_hba *phba, struct lpfc_dmabuf *mp)
 	drqe.address_hi = putPaddrHigh(rqb_entry->dbuf.phys);
 	rc = lpfc_sli4_rq_put(rqb_entry->hrq, rqb_entry->drq, &hrqe, &drqe);
 	if (rc < 0) {
-		(rqbp->rqb_free_buffer)(phba, rqb_entry);
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"6409 Cannot post to RQ %d: %x %x\n",
 				rqb_entry->hrq->queue_id,
 				rqb_entry->hrq->host_index,
 				rqb_entry->hrq->hba_index);
+		(rqbp->rqb_free_buffer)(phba, rqb_entry);
 	} else {
 		list_add_tail(&rqb_entry->hbuf.list, &rqbp->rqb_buffer_list);
 		rqbp->buffer_count++;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 071/100] gianfar: Disable EEE autoneg by default

[Sasha Levin]

From: Claudiu Manoil <claudiu.manoil@nxp.com>

[ Upstream commit b6b5e8a691185606dfffff3198c89e3b4fd9d4f6 ]

This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/gianfar.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 81a73af0df31..7f837006bb6a 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1792,6 +1792,7 @@ static int init_phy(struct net_device *dev)
 		GFAR_SUPPORTED_GBIT : 0;
 	phy_interface_t interface;
 	struct phy_device *phydev;
+	struct ethtool_eee edata;
 
 	priv->oldlink = 0;
 	priv->oldspeed = 0;
@@ -1816,6 +1817,10 @@ static int init_phy(struct net_device *dev)
 	/* Add support for flow control, but don't advertise it by default */
 	phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
 
+	/* disable EEE autoneg, EEE not supported by eTSEC */
+	memset(&edata, 0, sizeof(struct ethtool_eee));
+	phy_ethtool_set_eee(phydev, &edata);
+
 	return 0;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 073/100] scsi: bfa: fix access to bfad_im_port_s

[Sasha Levin]

From: Johannes Thumshirn <jthumshirn@suse.de>

[ Upstream commit 45349821ab3a8d378b8f37e52c6fe1aa1b870c47 ]

Commit 'cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")'
changed access to bfa's 'struct bfad_im_port_s' by using shost_priv()
instead of shost->hostdata[0].

This lead to crashes like in the following back-trace:

task: ffff880046375300 ti: ffff8800a2ef8000 task.ti: ffff8800a2ef8000
RIP: e030:[<ffffffffa04c8252>]  [<ffffffffa04c8252>] bfa_fcport_get_attr+0x82/0x260 [bfa]
RSP: e02b:ffff8800a2efba10  EFLAGS: 00010046
RAX: 575f415441536432 RBX: ffff8800a2efba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8800a2efba28 RDI: ffff880004dc31d8
RBP: ffff880004dc31d8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88011fadc468 R11: 0000000000000001 R12: ffff880004dc31f0
R13: 0000000000000200 R14: ffff880004dc61d0 R15: ffff880004947a10
FS:  00007feb1e489700(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007ffe14e46c10 CR3: 00000000957b8000 CR4: 0000000000000660
Stack:
 ffff88001d4da000 ffff880004dc31c0 ffffffffa048a9df ffffffff81e56380
 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[] bfad_iocmd_ioc_get_info+0x4f/0x220 [bfa]
[] bfad_iocmd_handler+0xa00/0xd40 [bfa]
[] bfad_im_bsg_request+0xee/0x1b0 [bfa]
[] fc_bsg_dispatch+0x10b/0x1b0 [scsi_transport_fc]
[] bsg_request_fn+0x11d/0x1c0
[] __blk_run_queue+0x2f/0x40
[] blk_execute_rq_nowait+0xa8/0x160
[] blk_execute_rq+0x77/0x120
[] bsg_ioctl+0x1b6/0x200
[] do_vfs_ioctl+0x2cd/0x4a0
[] SyS_ioctl+0x74/0x80
[] entry_SYSCALL_64_fastpath+0x12/0x6d

Fixes: cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/bfa/bfad_bsg.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index b2e8c0dfc79c..2dd2008c9264 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -3135,7 +3135,8 @@ bfad_im_bsg_vendor_request(struct bsg_job *job)
 	struct fc_bsg_request *bsg_request = job->request;
 	struct fc_bsg_reply *bsg_reply = job->reply;
 	uint32_t vendor_cmd = bsg_request->rqst_data.h_vendor.vendor_cmd[0];
-	struct bfad_im_port_s *im_port = shost_priv(fc_bsg_to_shost(job));
+	struct Scsi_Host *shost = fc_bsg_to_shost(job);
+	struct bfad_im_port_s *im_port = shost->hostdata[0];
 	struct bfad_s *bfad = im_port->bfad;
 	struct request_queue *request_q = job->req->q;
 	void *payload_kbuf;
@@ -3357,7 +3358,8 @@ int
 bfad_im_bsg_els_ct_request(struct bsg_job *job)
 {
 	struct bfa_bsg_data *bsg_data;
-	struct bfad_im_port_s *im_port = shost_priv(fc_bsg_to_shost(job));
+	struct Scsi_Host *shost = fc_bsg_to_shost(job);
+	struct bfad_im_port_s *im_port = shost->hostdata[0];
 	struct bfad_s *bfad = im_port->bfad;
 	bfa_bsg_fcpt_t *bsg_fcpt;
 	struct bfad_fcxp    *drv_fcxp;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 074/100] dmaengine: ioat: Fix error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5c9afbda911ce20b3f2181d1e440a0222e1027dd ]

If the last test in 'ioat_dma_self_test()' fails, we must release all
the allocated resources and not just part of them.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/ioat/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 93e006c3441d..854deb0da07c 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -390,7 +390,7 @@ static int ioat_dma_self_test(struct ioatdma_device *ioat_dma)
 	if (memcmp(src, dest, IOAT_TEST_SIZE)) {
 		dev_err(dev, "Self-test copy failed compare, disabling\n");
 		err = -ENODEV;
-		goto free_resources;
+		goto unmap_dma;
 	}
 
 unmap_dma:
-- 
2.11.0

[PATCH AUTOSEL for 4.14 075/100] dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved

[Sasha Levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit 62a277d43d47e74972de44d33bd3763e31992414 ]

_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _xt_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: 4483320e241c ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/at_hdmac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index fbab271b3bf9..a861b5b4d443 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -708,7 +708,7 @@ atc_prep_dma_interleaved(struct dma_chan *chan,
 			 unsigned long flags)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
-	struct data_chunk	*first = xt->sgl;
+	struct data_chunk	*first;
 	struct at_desc		*desc = NULL;
 	size_t			xfer_count;
 	unsigned int		dwidth;
@@ -720,6 +720,8 @@ atc_prep_dma_interleaved(struct dma_chan *chan,
 	if (unlikely(!xt || xt->numf != 1 || !xt->frame_size))
 		return NULL;
 
+	first = xt->sgl;
+
 	dev_info(chan2dev(chan),
 		 "%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n",
 		__func__, &xt->src_start, &xt->dst_start, xt->numf,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 076/100] xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)

[Sasha Levin]

From: Aviv Heller <avivh@mellanox.com>

[ Upstream commit 4ce3dbe397d7b6b15f272ae757c78c35e9e4b61d ]

Code path when (encap_type < 0) does not verify the state is valid
before progressing.

This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_input.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 347ab31574d5..da6447389ffb 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -207,7 +207,7 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 	xfrm_address_t *daddr;
 	struct xfrm_mode *inner_mode;
 	u32 mark = skb->mark;
-	unsigned int family;
+	unsigned int family = AF_UNSPEC;
 	int decaps = 0;
 	int async = 0;
 	bool xfrm_gro = false;
@@ -216,6 +216,16 @@ int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi, int encap_type)
 
 	if (encap_type < 0) {
 		x = xfrm_input_state(skb);
+
+		if (unlikely(x->km.state != XFRM_STATE_VALID)) {
+			if (x->km.state == XFRM_STATE_ACQ)
+				XFRM_INC_STATS(net, LINUX_MIB_XFRMACQUIREERROR);
+			else
+				XFRM_INC_STATS(net,
+					       LINUX_MIB_XFRMINSTATEINVALID);
+			goto drop;
+		}
+
 		family = x->outer_mode->afinfo->family;
 
 		/* An encap_type of -1 indicates async resumption. */
-- 
2.11.0

[PATCH AUTOSEL for 4.14 078/100] netfilter: nfnetlink_cthelper: Add missing permission checks

[Sasha Levin]

From: Kevin Cernekee <cernekee@chromium.org>

[ Upstream commit 4b380c42f7d00a395feede754f0bc2292eebe6e5 ]

The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, nfnl_cthelper_list is shared by all net namespaces on the
system.  An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:

    $ nfct helper list
    nfct v1.4.4: netlink error: Operation not permitted
    $ vpnns -- nfct helper list
    {
            .name = ftp,
            .queuenum = 0,
            .l3protonum = 2,
            .l4protonum = 6,
            .priv_data_len = 24,
            .status = enabled,
    };

Add capable() checks in nfnetlink_cthelper, as this is cleaner than
trying to generalize the solution.

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/nfnetlink_cthelper.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index 41628b393673..d33ce6d5ebce 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/capability.h>
 #include <net/netlink.h>
 #include <net/sock.h>
 
@@ -407,6 +408,9 @@ static int nfnl_cthelper_new(struct net *net, struct sock *nfnl,
 	struct nfnl_cthelper *nlcth;
 	int ret = 0;
 
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
 	if (!tb[NFCTH_NAME] || !tb[NFCTH_TUPLE])
 		return -EINVAL;
 
@@ -611,6 +615,9 @@ static int nfnl_cthelper_get(struct net *net, struct sock *nfnl,
 	struct nfnl_cthelper *nlcth;
 	bool tuple_set = false;
 
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
 	if (nlh->nlmsg_flags & NLM_F_DUMP) {
 		struct netlink_dump_control c = {
 			.dump = nfnl_cthelper_dump_table,
@@ -678,6 +685,9 @@ static int nfnl_cthelper_del(struct net *net, struct sock *nfnl,
 	struct nfnl_cthelper *nlcth, *n;
 	int j = 0, ret;
 
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
 	if (tb[NFCTH_NAME])
 		helper_name = nla_data(tb[NFCTH_NAME]);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 077/100] xfrm: Fix stack-out-of-bounds read on socket policy lookup.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit ddc47e4404b58f03e98345398fb12d38fe291512 ]

When we do tunnel or beet mode, we pass saddr and daddr from the
template to xfrm_state_find(), this is ok. On transport mode,
we pass the addresses from the flowi, assuming that the IP
addresses (and address family) don't change during transformation.
This assumption is wrong in the IPv4 mapped IPv6 case, packet
is IPv4 and template is IPv6.

Fix this by catching address family missmatches of the policy
and the flow already before we do the lookup.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_policy.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 6bc16bb61b55..50c5f46b5cca 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1169,9 +1169,15 @@ static struct xfrm_policy *xfrm_sk_policy_lookup(const struct sock *sk, int dir,
  again:
 	pol = rcu_dereference(sk->sk_policy[dir]);
 	if (pol != NULL) {
-		bool match = xfrm_selector_match(&pol->selector, fl, family);
+		bool match;
 		int err = 0;
 
+		if (pol->family != family) {
+			pol = NULL;
+			goto out;
+		}
+
+		match = xfrm_selector_match(&pol->selector, fl, family);
 		if (match) {
 			if ((sk->sk_mark & pol->mark.m) != pol->mark.v) {
 				pol = NULL;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 079/100] netfilter: xt_bpf: add overflow checks

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit 6ab405114b0b229151ef06f4e31c7834dd09d0c0 ]

Check whether inputs from userspace are too long (explicit length field too
big or string not null-terminated) to avoid out-of-bounds reads.

As far as I can tell, this can at worst lead to very limited kernel heap
memory disclosure or oopses.

This bug can be triggered by an unprivileged user even if the xt_bpf module
is not loaded: iptables is available in network namespaces, and the xt_bpf
module can be autoloaded.

Triggering the bug with a classic BPF filter with fake length 0x1000 causes
the following KASAN report:

==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0
Read of size 32768 at addr ffff8801eff2c494 by task test/4627

CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1
[...]
Call Trace:
 dump_stack+0x5c/0x85
 print_address_description+0x6a/0x260
 kasan_report+0x254/0x370
 ? bpf_prog_create+0x84/0xf0
 memcpy+0x1f/0x50
 bpf_prog_create+0x84/0xf0
 bpf_mt_check+0x90/0xd6 [xt_bpf]
[...]
Allocated by task 4627:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc_node+0x47/0x60
 xt_alloc_table_info+0x41/0x70 [x_tables]
[...]
The buggy address belongs to the object at ffff8801eff2c3c0
                which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 212 bytes inside of
                2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0)
[...]
==================================================================

Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/xt_bpf.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/netfilter/xt_bpf.c b/net/netfilter/xt_bpf.c
index 29123934887b..5185ff0f8f58 100644
--- a/net/netfilter/xt_bpf.c
+++ b/net/netfilter/xt_bpf.c
@@ -27,6 +27,9 @@ static int __bpf_mt_check_bytecode(struct sock_filter *insns, __u16 len,
 {
 	struct sock_fprog_kern program;
 
+	if (len > XT_BPF_MAX_NUM_INSTR)
+		return -EINVAL;
+
 	program.len = len;
 	program.filter = insns;
 
@@ -55,6 +58,9 @@ static int __bpf_mt_check_path(const char *path, struct bpf_prog **ret)
 	mm_segment_t oldfs = get_fs();
 	int retval, fd;
 
+	if (strnlen(path, XT_BPF_PATH_MAX) == XT_BPF_PATH_MAX)
+		return -EINVAL;
+
 	set_fs(KERNEL_DS);
 	fd = bpf_obj_get_user(path);
 	set_fs(oldfs);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 081/100] netfilter: xt_osf: Add missing permission checks

[Sasha Levin]

From: Kevin Cernekee <cernekee@chromium.org>

[ Upstream commit 916a27901de01446bcf57ecca4783f6cff493309 ]

The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, xt_osf_fingers is shared by all net namespaces on the
system.  An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:

    vpnns -- nfnl_osf -f /tmp/pf.os

    vpnns -- nfnl_osf -f /tmp/pf.os -d

These non-root operations successfully modify the systemwide OS
fingerprint list.  Add new capable() checks so that they can't.

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/xt_osf.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 36e14b1f061d..a34f314a8c23 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 
+#include <linux/capability.h>
 #include <linux/if.h>
 #include <linux/inetdevice.h>
 #include <linux/ip.h>
@@ -70,6 +71,9 @@ static int xt_osf_add_callback(struct net *net, struct sock *ctnl,
 	struct xt_osf_finger *kf = NULL, *sf;
 	int err = 0;
 
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
 	if (!osf_attrs[OSF_ATTR_FINGER])
 		return -EINVAL;
 
@@ -115,6 +119,9 @@ static int xt_osf_remove_callback(struct net *net, struct sock *ctnl,
 	struct xt_osf_finger *sf;
 	int err = -ENOENT;
 
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
 	if (!osf_attrs[OSF_ATTR_FINGER])
 		return -EINVAL;
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 080/100] clk: fix a panic error caused by accessing NULL pointer

[Sasha Levin]

From: Cai Li <cai.li@spreadtrum.com>

[ Upstream commit 975b820b6836b6b6c42fb84cd2e772e2b41bca67 ]

In some cases the clock parent would be set NULL when doing re-parent,
it will cause a NULL pointer accessing if clk_set trace event is
enabled.

This patch sets the parent as "none" if the input parameter is NULL.

Fixes: dfc202ead312 (clk: Add tracepoints for hardware operations)
Signed-off-by: Cai Li <cai.li@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/trace/events/clk.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/trace/events/clk.h b/include/trace/events/clk.h
index 758607226bfd..2cd449328aee 100644
--- a/include/trace/events/clk.h
+++ b/include/trace/events/clk.h
@@ -134,12 +134,12 @@ DECLARE_EVENT_CLASS(clk_parent,
 
 	TP_STRUCT__entry(
 		__string(        name,           core->name                )
-		__string(        pname,          parent->name              )
+		__string(        pname, parent ? parent->name : "none"     )
 	),
 
 	TP_fast_assign(
 		__assign_str(name, core->name);
-		__assign_str(pname, parent->name);
+		__assign_str(pname, parent ? parent->name : "none");
 	),
 
 	TP_printk("%s %s", __get_str(name), __get_str(pname))
-- 
2.11.0

[PATCH AUTOSEL for 4.14 082/100] staging: ccree: Uninitialized return in ssi_ahash_import()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit aece09024414b54158e03aa45f4a4436e7cb996c ]

The return value isn't initialized on some success paths.

Fixes: c5f39d07860c ("staging: ccree: fix leak of import() after init()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/ccree/ssi_hash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/ccree/ssi_hash.c b/drivers/staging/ccree/ssi_hash.c
index f72ca485c86f..e266a70a1b32 100644
--- a/drivers/staging/ccree/ssi_hash.c
+++ b/drivers/staging/ccree/ssi_hash.c
@@ -1781,7 +1781,7 @@ static int ssi_ahash_import(struct ahash_request *req, const void *in)
 	struct device *dev = &ctx->drvdata->plat_dev->dev;
 	struct ahash_req_ctx *state = ahash_request_ctx(req);
 	u32 tmp;
-	int rc;
+	int rc = 0;
 
 	memcpy(&tmp, in, sizeof(u32));
 	if (tmp != CC_EXPORT_MAGIC) {
-- 
2.11.0

[PATCH AUTOSEL for 4.14 083/100] ASoC: rockchip: disable clock on error

[Sasha Levin]

From: Stefan Potyra <Stefan.Potyra@elektrobit.com>

[ Upstream commit c7b92172a61b91936be985cb9bc499a4ebc6489b ]

Disable the clocks in  rk_spdif_probe when an error occurs after one
of the clocks has been enabled previously.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: f874b80e1571 ASoC: rockchip: Add rockchip SPDIF transceiver driver
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/rockchip/rockchip_spdif.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_spdif.c b/sound/soc/rockchip/rockchip_spdif.c
index ee5055d47d13..a89fe9b6463b 100644
--- a/sound/soc/rockchip/rockchip_spdif.c
+++ b/sound/soc/rockchip/rockchip_spdif.c
@@ -322,26 +322,30 @@ static int rk_spdif_probe(struct platform_device *pdev)
 	spdif->mclk = devm_clk_get(&pdev->dev, "mclk");
 	if (IS_ERR(spdif->mclk)) {
 		dev_err(&pdev->dev, "Can't retrieve rk_spdif master clock\n");
-		return PTR_ERR(spdif->mclk);
+		ret = PTR_ERR(spdif->mclk);
+		goto err_disable_hclk;
 	}
 
 	ret = clk_prepare_enable(spdif->mclk);
 	if (ret) {
 		dev_err(spdif->dev, "clock enable failed %d\n", ret);
-		return ret;
+		goto err_disable_clocks;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(regs))
-		return PTR_ERR(regs);
+	if (IS_ERR(regs)) {
+		ret = PTR_ERR(regs);
+		goto err_disable_clocks;
+	}
 
 	spdif->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "hclk", regs,
 						  &rk_spdif_regmap_config);
 	if (IS_ERR(spdif->regmap)) {
 		dev_err(&pdev->dev,
 			"Failed to initialise managed register map\n");
-		return PTR_ERR(spdif->regmap);
+		ret = PTR_ERR(spdif->regmap);
+		goto err_disable_clocks;
 	}
 
 	spdif->playback_dma_data.addr = res->start + SPDIF_SMPDR;
@@ -373,6 +377,10 @@ static int rk_spdif_probe(struct platform_device *pdev)
 
 err_pm_runtime:
 	pm_runtime_disable(&pdev->dev);
+err_disable_clocks:
+	clk_disable_unprepare(spdif->mclk);
+err_disable_hclk:
+	clk_disable_unprepare(spdif->hclk);
 
 	return ret;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 084/100] spi: sun4i: disable clocks in the remove function

[Sasha Levin]

From: Takuo Koguchi <takuo.koguchi@gmail.com>

[ Upstream commit c810daba0ab5226084a56893a789af427a801146 ]

mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-sun4i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index c5cd635c28f3..41410031f8e9 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -525,7 +525,7 @@ static int sun4i_spi_probe(struct platform_device *pdev)
 
 static int sun4i_spi_remove(struct platform_device *pdev)
 {
-	pm_runtime_disable(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
 
 	return 0;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 085/100] IB/mlx4: Fix RSS hash fields restrictions

[Sasha Levin]

From: Guy Levi <guyle@mellanox.com>

[ Upstream commit 4d02ebd9bbbdde1d524e62b540b0402cee7bbcdf ]

Mistakenly the driver didn't allow RSS hash fields combinations which
involve both IPv4 and IPv6 protocols. This bug caused to failures for
user's use cases for RSS.

Consequently, this patch fixes this bug and allows any combination that
the HW can support.

Additionally, the patch fixes the driver to return an error in case the
user provides an unsupported mask for RSS hash fields.

Fixes: 3078f5f1bd8b ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/mlx4/qp.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index fcfa08747899..9354fec8efe7 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -666,6 +666,19 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 		return (-EOPNOTSUPP);
 	}
 
+	if (ucmd->rx_hash_fields_mask & ~(MLX4_IB_RX_HASH_SRC_IPV4	|
+					  MLX4_IB_RX_HASH_DST_IPV4	|
+					  MLX4_IB_RX_HASH_SRC_IPV6	|
+					  MLX4_IB_RX_HASH_DST_IPV6	|
+					  MLX4_IB_RX_HASH_SRC_PORT_TCP	|
+					  MLX4_IB_RX_HASH_DST_PORT_TCP	|
+					  MLX4_IB_RX_HASH_SRC_PORT_UDP	|
+					  MLX4_IB_RX_HASH_DST_PORT_UDP)) {
+		pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n",
+			 ucmd->rx_hash_fields_mask);
+		return (-EOPNOTSUPP);
+	}
+
 	if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_IPV4) &&
 	    (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_IPV4)) {
 		rss_ctx->flags = MLX4_RSS_IPV4;
@@ -691,11 +704,11 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 			return (-EOPNOTSUPP);
 		}
 
-		if (rss_ctx->flags & MLX4_RSS_IPV4) {
+		if (rss_ctx->flags & MLX4_RSS_IPV4)
 			rss_ctx->flags |= MLX4_RSS_UDP_IPV4;
-		} else if (rss_ctx->flags & MLX4_RSS_IPV6) {
+		if (rss_ctx->flags & MLX4_RSS_IPV6)
 			rss_ctx->flags |= MLX4_RSS_UDP_IPV6;
-		} else {
+		if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) {
 			pr_debug("RX Hash fields_mask is not supported - UDP must be set with IPv4 or IPv6\n");
 			return (-EOPNOTSUPP);
 		}
@@ -707,15 +720,14 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx,
 
 	if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) &&
 	    (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) {
-		if (rss_ctx->flags & MLX4_RSS_IPV4) {
+		if (rss_ctx->flags & MLX4_RSS_IPV4)
 			rss_ctx->flags |= MLX4_RSS_TCP_IPV4;
-		} else if (rss_ctx->flags & MLX4_RSS_IPV6) {
+		if (rss_ctx->flags & MLX4_RSS_IPV6)
 			rss_ctx->flags |= MLX4_RSS_TCP_IPV6;
-		} else {
+		if (!(rss_ctx->flags & (MLX4_RSS_IPV6 | MLX4_RSS_IPV4))) {
 			pr_debug("RX Hash fields_mask is not supported - TCP must be set with IPv4 or IPv6\n");
 			return (-EOPNOTSUPP);
 		}
-
 	} else if ((ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_SRC_PORT_TCP) ||
 		   (ucmd->rx_hash_fields_mask & MLX4_IB_RX_HASH_DST_PORT_TCP)) {
 		pr_debug("RX Hash fields_mask is not supported - both TCP SRC and DST must be set\n");
-- 
2.11.0

[PATCH AUTOSEL for 4.14 086/100] RDMA/netlink: Fix general protection fault

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit d0e312fe3d34c1bc014a7f8ec6540d05e8077483 ]

The RDMA netlink core code checks validity of messages by ensuring
that type and operand are in range. It works well for almost all
clients except NLDEV, which has cb_table less than number of operands.

Request to access such operand will trigger the following kernel panic.

This patch updates all places where cb_table is declared for the
consistency, but only NLDEV is actually need it.

general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
Modules linked in:
CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
task: ffff8800657799c0 task.stack: ffff8800695d000
RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0
RSP: 0018:ffff8800695d7838 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7
RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc
RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000
R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c
R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0
FS:  00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? rdma_nl_multicast+0x80/0x80
 rdma_nl_rcv+0x36b/0x4d0
 ? ibnl_put_attr+0xc0/0xc0
 netlink_unicast+0x4bd/0x6d0
 ? netlink_sendskb+0x50/0x50
 ? drop_futex_key_refs.isra.4+0x68/0xb0
 netlink_sendmsg+0x9ab/0xbd0
 ? nlmsg_notify+0x140/0x140
 ? wake_up_q+0xa1/0xf0
 ? drop_futex_key_refs.isra.4+0x68/0xb0
 sock_sendmsg+0x88/0xd0
 sock_write_iter+0x228/0x3c0
 ? sock_sendmsg+0xd0/0xd0
 ? do_futex+0x3e5/0xb20
 ? iov_iter_init+0xaf/0x1d0
 __vfs_write+0x46e/0x640
 ? sched_clock_cpu+0x1b/0x190
 ? __vfs_read+0x620/0x620
 ? __fget+0x23a/0x390
 ? rw_verify_area+0xca/0x290
 vfs_write+0x192/0x490
 SyS_write+0xde/0x1c0
 ? SyS_read+0x1c0/0x1c0
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x7fee6a74a219
RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219
RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006
RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98
R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff
Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838
---[ end trace ba085d123959c8ec ]---
Kernel panic - not syncing: Fatal exception

Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: b4c598a67ea1 ("RDMA/netlink: Implement nldev device dumpit calback")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c    | 2 +-
 drivers/infiniband/core/device.c | 2 +-
 drivers/infiniband/core/iwcm.c   | 2 +-
 drivers/infiniband/core/nldev.c  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 09063f0d86d2..e457dface2d2 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4462,7 +4462,7 @@ static int cma_get_id_stats(struct sk_buff *skb, struct netlink_callback *cb)
 	return skb->len;
 }
 
-static const struct rdma_nl_cbs cma_cb_table[] = {
+static const struct rdma_nl_cbs cma_cb_table[RDMA_NL_RDMA_CM_NUM_OPS] = {
 	[RDMA_NL_RDMA_CM_ID_STATS] = { .dump = cma_get_id_stats},
 };
 
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 5e1be4949d5f..30914f3baa5f 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1146,7 +1146,7 @@ struct net_device *ib_get_net_dev_by_params(struct ib_device *dev,
 }
 EXPORT_SYMBOL(ib_get_net_dev_by_params);
 
-static const struct rdma_nl_cbs ibnl_ls_cb_table[] = {
+static const struct rdma_nl_cbs ibnl_ls_cb_table[RDMA_NL_LS_NUM_OPS] = {
 	[RDMA_NL_LS_OP_RESOLVE] = {
 		.doit = ib_nl_handle_resolve_resp,
 		.flags = RDMA_NL_ADMIN_PERM,
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index fcf42f6bb82a..30d7277249b8 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -80,7 +80,7 @@ const char *__attribute_const__ iwcm_reject_msg(int reason)
 }
 EXPORT_SYMBOL(iwcm_reject_msg);
 
-static struct rdma_nl_cbs iwcm_nl_cb_table[] = {
+static struct rdma_nl_cbs iwcm_nl_cb_table[RDMA_NL_IWPM_NUM_OPS] = {
 	[RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb},
 	[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
 	[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},
diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index 2fae850a3eff..9a05245a1acf 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -303,7 +303,7 @@ out:	cb->args[0] = idx;
 	return skb->len;
 }
 
-static const struct rdma_nl_cbs nldev_cb_table[] = {
+static const struct rdma_nl_cbs nldev_cb_table[RDMA_NLDEV_NUM_OPS] = {
 	[RDMA_NLDEV_CMD_GET] = {
 		.doit = nldev_get_doit,
 		.dump = nldev_get_dumpit,
-- 
2.11.0

[PATCH AUTOSEL for 4.14 088/100] drm/armada: fix leak of crtc structure

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 33cd3c07a976e11c3c4cc6b0b3db6760ad1590c5 ]

Fix the leak of the CRTC structure in the failure paths of
armada_drm_crtc_create().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/armada/armada_crtc.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c
index 2a4d163ac76f..79ce877bf45f 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -1225,17 +1225,13 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
 
 	ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc",
 			       dcrtc);
-	if (ret < 0) {
-		kfree(dcrtc);
-		return ret;
-	}
+	if (ret < 0)
+		goto err_crtc;
 
 	if (dcrtc->variant->init) {
 		ret = dcrtc->variant->init(dcrtc, dev);
-		if (ret) {
-			kfree(dcrtc);
-			return ret;
-		}
+		if (ret)
+			goto err_crtc;
 	}
 
 	/* Ensure AXI pipeline is enabled */
@@ -1246,13 +1242,15 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
 	dcrtc->crtc.port = port;
 
 	primary = kzalloc(sizeof(*primary), GFP_KERNEL);
-	if (!primary)
-		return -ENOMEM;
+	if (!primary) {
+		ret = -ENOMEM;
+		goto err_crtc;
+	}
 
 	ret = armada_drm_plane_init(primary);
 	if (ret) {
 		kfree(primary);
-		return ret;
+		goto err_crtc;
 	}
 
 	ret = drm_universal_plane_init(drm, &primary->base, 0,
@@ -1263,7 +1261,7 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
 				       DRM_PLANE_TYPE_PRIMARY, NULL);
 	if (ret) {
 		kfree(primary);
-		return ret;
+		goto err_crtc;
 	}
 
 	ret = drm_crtc_init_with_planes(drm, &dcrtc->crtc, &primary->base, NULL,
@@ -1282,6 +1280,9 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
 
 err_crtc_init:
 	primary->base.funcs->destroy(&primary->base);
+err_crtc:
+	kfree(dcrtc);
+
 	return ret;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 087/100] xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ]

On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.

Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.

We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_user.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index e44a0fed48dd..30a6dc9ad078 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1417,11 +1417,14 @@ static void copy_templates(struct xfrm_policy *xp, struct xfrm_user_tmpl *ut,
 
 static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
 {
+	u16 prev_family;
 	int i;
 
 	if (nr > XFRM_MAX_DEPTH)
 		return -EINVAL;
 
+	prev_family = family;
+
 	for (i = 0; i < nr; i++) {
 		/* We never validated the ut->family value, so many
 		 * applications simply leave it at zero.  The check was
@@ -1433,6 +1436,12 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
 		if (!ut[i].family)
 			ut[i].family = family;
 
+		if ((ut[i].mode == XFRM_MODE_TRANSPORT) &&
+		    (ut[i].family != prev_family))
+			return -EINVAL;
+
+		prev_family = ut[i].family;
+
 		switch (ut[i].family) {
 		case AF_INET:
 			break;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 089/100] ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update

[Sasha Levin]

From: Jiada Wang <jiada_wang@mentor.com>

[ Upstream commit 33f801366bdf3f8b67dfe325b84f4051a090d01e ]

Currently there is race condition between set of byte_pos and wrap
it around when new buffer starts. If .pointer is called in-between
it will result in inconsistent pointer position be returned
from .pointer callback.

This patch increments buffer pointer atomically to avoid this issue.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/sh/rcar/ssi.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 2aef7c00cca1..f0fb85fda42d 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -449,25 +449,29 @@ static bool rsnd_ssi_pointer_update(struct rsnd_mod *mod,
 				    int byte)
 {
 	struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+	bool ret = false;
+	int byte_pos;
 
-	ssi->byte_pos += byte;
+	byte_pos = ssi->byte_pos + byte;
 
-	if (ssi->byte_pos >= ssi->next_period_byte) {
+	if (byte_pos >= ssi->next_period_byte) {
 		struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
 
 		ssi->period_pos++;
 		ssi->next_period_byte += ssi->byte_per_period;
 
 		if (ssi->period_pos >= runtime->periods) {
-			ssi->byte_pos = 0;
+			byte_pos = 0;
 			ssi->period_pos = 0;
 			ssi->next_period_byte = ssi->byte_per_period;
 		}
 
-		return true;
+		ret = true;
 	}
 
-	return false;
+	WRITE_ONCE(ssi->byte_pos, byte_pos);
+
+	return ret;
 }
 
 /*
@@ -838,7 +842,7 @@ static int rsnd_ssi_pointer(struct rsnd_mod *mod,
 	struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
 	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
 
-	*pointer = bytes_to_frames(runtime, ssi->byte_pos);
+	*pointer = bytes_to_frames(runtime, READ_ONCE(ssi->byte_pos));
 
 	return 0;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 090/100] drm/vc4: Release fence after signalling

[Sasha Levin]

From: Stefan Schake <stschake@gmail.com>

[ Upstream commit babc8110057cb9ca542c3c1666cbda4e8ccf9250 ]

We were never releasing the initial fence reference that is obtained
through dma_fence_init.

Link: https://github.com/anholt/linux/issues/122
Fixes: cdec4d361323 ("drm/vc4: Expose dma-buf fences for V3D rendering.")
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1512236444-301-1-git-send-email-stschake@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/vc4/vc4_gem.c | 4 +++-
 drivers/gpu/drm/vc4/vc4_irq.c | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
index d0c6bfb68c4e..e554cbf18a55 100644
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -829,8 +829,10 @@ vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec)
 	/* If we got force-completed because of GPU reset rather than
 	 * through our IRQ handler, signal the fence now.
 	 */
-	if (exec->fence)
+	if (exec->fence) {
 		dma_fence_signal(exec->fence);
+		dma_fence_put(exec->fence);
+	}
 
 	if (exec->bo) {
 		for (i = 0; i < exec->bo_count; i++)
diff --git a/drivers/gpu/drm/vc4/vc4_irq.c b/drivers/gpu/drm/vc4/vc4_irq.c
index 7d7af3a93d94..fc1fc43a924d 100644
--- a/drivers/gpu/drm/vc4/vc4_irq.c
+++ b/drivers/gpu/drm/vc4/vc4_irq.c
@@ -139,6 +139,7 @@ vc4_irq_finish_render_job(struct drm_device *dev)
 	list_move_tail(&exec->head, &vc4->job_done_list);
 	if (exec->fence) {
 		dma_fence_signal_locked(exec->fence);
+		dma_fence_put(exec->fence);
 		exec->fence = NULL;
 	}
 	vc4_submit_next_render_job(dev);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 092/100] usb: dwc3: gadget: Wait longer for controller to end command processing

[Sasha Levin]

From: Vincent Pelletier <plr.vincent@gmail.com>

[ Upstream commit 8722e095f5a44d0e409e45c5ddc2ee9cf589c777 ]

DWC3_DEPCMD_ENDTRANSFER has been witnessed to require around 600 iterations
before controller would become idle again after unplugging the USB cable
with AIO reads submitted.
Bump timeout from 500 iterations to 1000 so dwc3_stop_active_transfer does
not receive -ETIMEDOUT and does not WARN:

[   81.326273] ------------[ cut here ]------------
[   81.335341] WARNING: CPU: 0 PID: 1874 at drivers/usb/dwc3/gadget.c:2627 dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3]
[   81.347094] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil dwc3 intel_powerclamp coretemp ulpi kvm_intel udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd basincove_gpadc industrialio gpio_keys usbcore usb_common
[   81.378142] CPU: 0 PID: 1874 Comm: irq/34-dwc3 Not tainted 4.14.0-edison+ #119
[   81.385545] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   81.394548] task: f5b1be00 task.stack: f420a000
[   81.399219] EIP: dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3]
[   81.406086] EFLAGS: 00010086 CPU: 0
[   81.409672] EAX: 0000001f EBX: f5729800 ECX: c132a2a2 EDX: 00000000
[   81.416096] ESI: f4054014 EDI: f41cf400 EBP: f420be10 ESP: f420bdf4
[   81.422521]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   81.428061] CR0: 80050033 CR2: b7a3f000 CR3: 01d94000 CR4: 001006d0
[   81.434483] Call Trace:
[   81.437063]  __dwc3_gadget_ep_disable+0xa3/0x2b0 [dwc3]
[   81.442438]  ? _raw_spin_lock_irqsave+0x32/0x40
[   81.447135]  dwc3_gadget_ep_disable+0xbf/0xe0 [dwc3]
[   81.452269]  usb_ep_disable+0x1c/0xd0 [udc_core]
[   81.457048]  ffs_func_eps_disable.isra.15+0x3b/0x90 [usb_f_fs]
[   81.463070]  ffs_func_set_alt+0x7d/0x310 [usb_f_fs]
[   81.468132]  ffs_func_disable+0x14/0x20 [usb_f_fs]
[   81.473075]  reset_config+0x5b/0x90 [libcomposite]
[   81.478023]  composite_disconnect+0x2b/0x50 [libcomposite]
[   81.483685]  dwc3_disconnect_gadget+0x39/0x50 [dwc3]
[   81.488808]  dwc3_gadget_disconnect_interrupt+0x21b/0x250 [dwc3]
[   81.495014]  dwc3_thread_interrupt+0x2a8/0xf70 [dwc3]
[   81.500219]  ? __schedule+0x78c/0x7e0
[   81.504027]  irq_thread_fn+0x18/0x30
[   81.507715]  ? irq_thread+0xb7/0x180
[   81.511400]  irq_thread+0x111/0x180
[   81.515000]  ? irq_finalize_oneshot+0xe0/0xe0
[   81.519490]  ? wake_threads_waitq+0x30/0x30
[   81.523806]  kthread+0x107/0x110
[   81.527131]  ? disable_percpu_irq+0x50/0x50
[   81.531439]  ? kthread_stop+0x150/0x150
[   81.535397]  ret_from_fork+0x19/0x24
[   81.539136] Code: 89 d8 c7 45 ec 00 00 00 00 c7 45 f0 00 00 00 00 c7 45 f4 00 00 00 00 e8 56 ef ff ff 85 c0 74 12 50 68 b9 1c 14 f8 e8 64 0f f7 c8 <0f> ff 58 5a 8d 76 00 8b 83 98 00 00 00 c6 83 a0 00 00 00 00 83
[   81.559295] ---[ end trace f3133eec81a473b8 ]---

Number of iterations measured on 4 consecutive unplugs:
[ 1088.799777] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 605 times
[ 1222.024986] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 580 times
[ 1317.590452] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 598 times
[ 1453.218314] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 594 times

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f064f1549333..97e52c0d1a72 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -267,7 +267,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 500;
+	u32			timeout = 1000;
 	u32			reg;
 
 	int			cmd_status = 0;
-- 
2.11.0

[PATCH AUTOSEL for 4.14 091/100] dmaengine: jz4740: disable/unprepare clk if probe fails

[Sasha Levin]

From: Tobias Jordan <Tobias.Jordan@elektrobit.com>

[ Upstream commit eb9436966fdc84cebdf222952a99898ab46d9bb0 ]

in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean
up.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/dma-jz4740.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c
index d50273fed715..afd5e10f8927 100644
--- a/drivers/dma/dma-jz4740.c
+++ b/drivers/dma/dma-jz4740.c
@@ -555,7 +555,7 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 
 	ret = dma_async_device_register(dd);
 	if (ret)
-		return ret;
+		goto err_clk;
 
 	irq = platform_get_irq(pdev, 0);
 	ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev);
@@ -568,6 +568,8 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 
 err_unregister:
 	dma_async_device_unregister(dd);
+err_clk:
+	clk_disable_unprepare(dmadev->clk);
 	return ret;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 093/100] usb: dwc3: of-simple: fix missing clk_disable_unprepare

[Sasha Levin]

From: Andreas Platschek <andreas.platschek@opentech.at>

[ Upstream commit ded600ea9fb51a495d2fcd21e90351df876488e8 ]

If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization")

Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/dwc3/dwc3-of-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index a26d1fde0f5e..fbfc09ebd2ec 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -57,8 +57,10 @@ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
 
 		clk = of_clk_get(np, i);
 		if (IS_ERR(clk)) {
-			while (--i >= 0)
+			while (--i >= 0) {
+				clk_disable_unprepare(simple->clks[i]);
 				clk_put(simple->clks[i]);
+			}
 			return PTR_ERR(clk);
 		}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.14 095/100] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses

[Sasha Levin]

From: Karol Herbst <kherbst@redhat.com>

[ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ]

If something calls ioremap() with an address not aligned to PAGE_SIZE, the
returned address might be not aligned as well. This led to a probe
registered on exactly the returned address, but the entire page was armed
for mmiotracing.

On calling iounmap() the address passed to unregister_kmmio_probe() was
PAGE_SIZE aligned by the caller leading to a complete freeze of the
machine.

We should always page align addresses while (un)registerung mappings,
because the mmiotracer works on top of pages, not mappings. We still keep
track of the probes based on their real addresses and lengths though,
because the mmiotrace still needs to know what are mapped memory regions.

Also move the call to mmiotrace_iounmap() prior page aligning the address,
so that all probes are unregistered properly, otherwise the kernel ends up
failing memory allocations randomly after disabling the mmiotracer.

Tested-by: Lyude <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nouveau@lists.freedesktop.org
Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/mm/ioremap.c |  4 ++--
 arch/x86/mm/kmmio.c   | 12 +++++++-----
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 34f0e1847dd6..5d4c358778dd 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -349,11 +349,11 @@ void iounmap(volatile void __iomem *addr)
 		return;
 	}
 
+	mmiotrace_iounmap(addr);
+
 	addr = (volatile void __iomem *)
 		(PAGE_MASK & (unsigned long __force)addr);
 
-	mmiotrace_iounmap(addr);
-
 	/* Use the vm area unlocked, assuming the caller
 	   ensures there isn't another iounmap for the same address
 	   in parallel. Reuse of the virtual address is prevented by
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index c21c2ed04612..58477ec3d66d 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -435,17 +435,18 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	unsigned long flags;
 	int ret = 0;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	unsigned int l;
 	pte_t *pte;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
-	if (get_kmmio_probe(p->addr)) {
+	if (get_kmmio_probe(addr)) {
 		ret = -EEXIST;
 		goto out;
 	}
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte) {
 		ret = -EINVAL;
 		goto out;
@@ -454,7 +455,7 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	kmmio_count++;
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
-		if (add_kmmio_fault_page(p->addr + size))
+		if (add_kmmio_fault_page(addr + size))
 			pr_err("Unable to set page fault.\n");
 		size += page_level_size(l);
 	}
@@ -528,19 +529,20 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 {
 	unsigned long flags;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	struct kmmio_fault_page *release_list = NULL;
 	struct kmmio_delayed_release *drelease;
 	unsigned int l;
 	pte_t *pte;
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte)
 		return;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (size < size_lim) {
-		release_kmmio_fault_page(p->addr + size, &release_list);
+		release_kmmio_fault_page(addr + size, &release_list);
 		size += page_level_size(l);
 	}
 	list_del_rcu(&p->list);
-- 
2.11.0

[PATCH AUTOSEL for 4.14 096/100] platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410

[Sasha Levin]

From: Pali Rohár <pali.rohar@gmail.com>

[ Upstream commit 68a213d325c23d39f109f4c7c824b906a7d209de ]

This machine reports number of keyboard backlight led levels, instead of
value of the last led level index. Therefore max_brightness properly needs
to be subtracted by 1 to match led max_brightness API.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/dell-laptop.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index f42159fd2031..7424e53157b0 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -49,6 +49,7 @@
 
 struct quirk_entry {
 	u8 touchpad_led;
+	u8 kbd_led_levels_off_1;
 
 	int needs_kbd_timeouts;
 	/*
@@ -79,6 +80,10 @@ static struct quirk_entry quirk_dell_xps13_9333 = {
 	.kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 },
 };
 
+static struct quirk_entry quirk_dell_latitude_e6410 = {
+	.kbd_led_levels_off_1 = 1,
+};
+
 static struct platform_driver platform_driver = {
 	.driver = {
 		.name = "dell-laptop",
@@ -280,6 +285,15 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_dell_xps13_9333,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Dell Latitude E6410",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6410"),
+		},
+		.driver_data = &quirk_dell_latitude_e6410,
+	},
 	{ }
 };
 
@@ -1200,6 +1214,9 @@ static int kbd_get_info(struct kbd_info *info)
 	units = (buffer->output[2] >> 8) & 0xFF;
 	info->levels = (buffer->output[2] >> 16) & 0xFF;
 
+	if (quirks && quirks->kbd_led_levels_off_1 && info->levels)
+		info->levels--;
+
 	if (units & BIT(0))
 		info->seconds = (buffer->output[3] >> 0) & 0xFF;
 	if (units & BIT(1))
-- 
2.11.0

[PATCH AUTOSEL for 4.14 097/100] xen: XEN_ACPI_PROCESSOR is Dom0-only

[Sasha Levin]

From: Jan Beulich <JBeulich@suse.com>

[ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ]

Add a respective dependency.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/xen/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 4545561954ee..30187b86729b 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -258,7 +258,7 @@ config XEN_ACPI_HOTPLUG_CPU
 
 config XEN_ACPI_PROCESSOR
 	tristate "Xen ACPI processor"
-	depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ
+	depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ
 	default m
 	help
           This ACPI processor uploads Power Management information to the Xen
-- 
2.11.0

[PATCH AUTOSEL for 4.14 098/100] PCI: rcar: Fix use-after-free in probe error path

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0c31f1d7be1b5c4858b1d714dcefa25f41428cab ]

If CONFIG_DEBUG_SLAB=y, and no PCIe card is inserted, the kernel crashes
during probe on r8a7791/koelsch:

  rcar-pcie fe000000.pcie: PCIe link down
  Unable to handle kernel paging request at virtual address 6b6b6b6b

(seeing this message requires earlycon and keep_bootcon).

Indeed, pci_free_host_bridge() frees the PCI host bridge, including the
embedded rcar_pcie object, so pci_free_resource_list() must not be called
afterwards.

To fix this, move the call to pci_free_resource_list() up, and update the
label name accordingly.

Fixes: ddd535f1ea3eb27e ("PCI: rcar: Fix memory leak when no PCIe card is inserted")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/host/pcie-rcar.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4e0b25d09b0c..f09ff4789bb5 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -1146,12 +1146,12 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	err = rcar_pcie_get_resources(pcie);
 	if (err < 0) {
 		dev_err(dev, "failed to request resources: %d\n", err);
-		goto err_free_bridge;
+		goto err_free_resource_list;
 	}
 
 	err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
 	if (err)
-		goto err_free_bridge;
+		goto err_free_resource_list;
 
 	pm_runtime_enable(dev);
 	err = pm_runtime_get_sync(dev);
@@ -1194,9 +1194,9 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 err_pm_disable:
 	pm_runtime_disable(dev);
 
-err_free_bridge:
-	pci_free_host_bridge(bridge);
+err_free_resource_list:
 	pci_free_resource_list(&pcie->resources);
+	pci_free_host_bridge(bridge);
 
 	return err;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.14 099/100] powerpc/perf/imc: Fix nest-imc cpuhotplug callback failure

[Sasha Levin]

From: Anju T Sudhakar <anju@linux.vnet.ibm.com>

[ Upstream commit ad2b6e01024ef23bddc3ce0bcb115ecd8c520b7e ]

Oops is observed during boot:

  Faulting instruction address: 0xc000000000248340
  cpu 0x0: Vector: 380 (Data Access Out of Range) at [c000000ff66fb850]
      pc: c000000000248340: event_function_call+0x50/0x1f0
      lr: c00000000024878c: perf_remove_from_context+0x3c/0x100
      sp: c000000ff66fbad0
     msr: 9000000000009033
     dar: 7d20e2a6f92d03c0
    pid = 14, comm = cpuhp/0

While registering the cpuhotplug callbacks for nest-imc, if we fail in
the cpuhotplug online path for any random node in a multi node
system (because the opal call to stop nest-imc counters fails for that
node), ppc_nest_imc_cpu_offline() will get invoked for other nodes who
successfully returned from cpuhotplug online path.

This call trace is generated since in the ppc_nest_imc_cpu_offline()
path we are trying to migrate the event context, when nest-imc
counters are not even initialized.

Patch to add a check to ensure that nest-imc is registered before
migrating the event context.

Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/perf/imc-pmu.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index cf64e16f92c2..da6ba9ba73ed 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -309,6 +309,19 @@ static int ppc_nest_imc_cpu_offline(unsigned int cpu)
 		return 0;
 
 	/*
+	 * Check whether nest_imc is registered. We could end up here if the
+	 * cpuhotplug callback registration fails. i.e, callback invokes the
+	 * offline path for all successfully registered nodes. At this stage,
+	 * nest_imc pmu will not be registered and we should return here.
+	 *
+	 * We return with a zero since this is not an offline failure. And
+	 * cpuhp_setup_state() returns the actual failure reason to the caller,
+	 * which in turn will call the cleanup routine.
+	 */
+	if (!nest_pmus)
+		return 0;
+
+	/*
 	 * Now that this cpu is one of the designated,
 	 * find a next cpu a) which is online and b) in same chip.
 	 */
-- 
2.11.0

[PATCH AUTOSEL for 4.14 100/100] hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@163.com>

[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ]

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/hippi/rrunner.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index 71ddadbf2368..d7ba2b813eff 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1381,8 +1381,8 @@ static int rr_close(struct net_device *dev)
 			    rrpriv->info_dma);
 	rrpriv->info = NULL;
 
-	free_irq(pdev->irq, dev);
 	spin_unlock_irqrestore(&rrpriv->lock, flags);
+	free_irq(pdev->irq, dev);
 
 	return 0;
 }
-- 
2.11.0