[PATCH 4.15 00/55] 4.15.1-stable review

[PATCH 4.15 00/55] 4.15.1-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.15.1 release.
There are 55 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.15.1-rc1

Matthew Garrett <mjg59@google.com>
    x86/efi: Clarify that reset attack mitigation needs appropriate userspace

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: synaptics-rmi4 - do not delete interrupt memory too early

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: synaptics-rmi4 - unmask F03 interrupts when port is opened

Wei Yongjun <weiyongjun1@huawei.com>
    test_firmware: fix missing unlock on error in config_num_requests_store()

Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
    iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels

Fabrice Gasnier <fabrice.gasnier@st.com>
    iio: adc: stm32: fix scan of multiple channels with DMA

Stefan Agner <stefan@agner.ch>
    spi: imx: do not access registers while clocks disabled

Fabio Estevam <fabio.estevam@nxp.com>
    serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    serial: 8250_dw: Revert "Improve clock rate setting"

Wei Yongjun <weiyongjun1@huawei.com>
    serial: 8250_uniphier: fix error return code in uniphier_uart_probe()

Masahiro Yamada <yamada.masahiro@socionext.com>
    serial: 8250_of: fix return code when probe function fails to get reset

Tomas Winkler <tomas.winkler@intel.com>
    mei: me: allow runtime pm for platform with D0i3

Ganesh Mahendran <opensource.ganesh@gmail.com>
    android: binder: use VM_ALLOC to get vm area

Martijn Coenen <maco@android.com>
    ANDROID: binder: remove waitqueue when thread exits.

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()

Oliver Neukum <oneukum@suse.com>
    usb: uas: unconditionally bring back host after reset

Hemant Kumar <hemantk@codeaurora.org>
    usb: f_fs: Prevent gadget unbind if it is already unbound

Johan Hovold <johan@kernel.org>
    USB: serial: simple: add Motorola Tetra driver

Shuah Khan <shuah@kernel.org>
    usbip: list: don't list devices attached to vhci_hcd

Shuah Khan <shuah@kernel.org>
    usbip: prevent bind loops on devices attached to vhci_hcd

Jia-Ju Bai <baijiaju1990@gmail.com>
    USB: serial: io_edgeport: fix possible sleep-in-atomic

Oliver Neukum <oneukum@suse.com>
    CDC-ACM: apply quirk for card reader

Hans de Goede <hdegoede@redhat.com>
    USB: cdc-acm: Do not log urb submission errors on disconnect

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: serial: pl2303: new device id for Chilitag

OKAMOTO Yoshiaki <yokamoto@allied-telesis.co.jp>
    usb: option: Add support for FS040U modem

Gaurav Kohli <gkohli@codeaurora.org>
    tty: fix data race between tty_init_dev and flush of buf

Gilad Ben-Yossef <gilad@benyossef.com>
    staging: ccree: fix fips event irq handling build

Gilad Ben-Yossef <gilad@benyossef.com>
    staging: ccree: NULLify backup_info when unused

Dmitry Eremin <dmitry.eremin@intel.com>
    staging: lustre: separate a connection destroy from free struct kib_conn

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: storvsc: missing error code in storvsc_probe()

Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
    scsi: aacraid: Fix hang in kdump

Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
    scsi: aacraid: Fix udev inquiry race condition

Mike Rapoport <rppt@linux.vnet.ibm.com>
    ima/policy: fix parsing of fsuuid

Lyude Paul <lyude@redhat.com>
    igb: Free IRQs when device is hotplugged

Jesse Chan <jc@linux.com>
    mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

Jesse Chan <jc@linux.com>
    gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE

Jesse Chan <jc@linux.com>
    gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

Jesse Chan <jc@linux.com>
    power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

Jason Gerecke <killertofu@gmail.com>
    HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events

Aaron Armstrong Skomra <skomra@gmail.com>
    HID: wacom: EKR: ensure devres groups at higher indexes are released

Stephan Mueller <smueller@chronox.de>
    crypto: af_alg - whitelist mask and type

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    crypto: sha3-generic - fixes for alignment and big endian operation

Antoine Tenart <antoine.tenart@free-electrons.com>
    crypto: inside-secure - avoid unmapping DMA memory that was not mapped

Antoine Tenart <antoine.tenart@free-electrons.com>
    crypto: inside-secure - fix hash when length is a multiple of a block

Junaid Shahid <junaids@google.com>
    crypto: aesni - Fix out-of-bounds access of the AAD buffer in generic-gcm-aesni

Junaid Shahid <junaids@google.com>
    crypto: aesni - Fix out-of-bounds access of the data buffer in generic-gcm-aesni

Sabrina Dubroca <sd@queasysnail.net>
    crypto: aesni - add wrapper for generic gcm(aes)

Sabrina Dubroca <sd@queasysnail.net>
    crypto: aesni - fix typo in generic_gcmaes_decrypt

Stephan Mueller <smueller@chronox.de>
    crypto: aesni - handle zero length dst buffer

Hauke Mehrtens <hauke@hauke-m.de>
    crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Reduce the suspend time consumption for ALC256

Linus Walleij <linus.walleij@linaro.org>
    gpio: Fix kernel stack leak to userspace

Patrice Chotard <patrice.chotard@st.com>
    gpio: stmpe: i2c transfer are forbiden in atomic context

Joel Stanley <joel@jms.id.au>
    tools/gpio: Fix build error with musl libc

Lukas Wunner <lukas@wunner.de>
    Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/x86/crypto/aesni-intel_asm.S                  | 199 ++++++---------------
 arch/x86/crypto/aesni-intel_glue.c                 |  70 ++++++--
 crypto/Kconfig                                     |   2 +-
 crypto/af_alg.c                                    |  10 +-
 crypto/sha3_generic.c                              |   5 +-
 drivers/android/binder.c                           |  12 ++
 drivers/android/binder_alloc.c                     |   2 +-
 drivers/bluetooth/hci_serdev.c                     |   1 +
 drivers/crypto/inside-secure/safexcel_hash.c       |  56 ++++--
 drivers/firmware/efi/Kconfig                       |   5 +-
 drivers/gpio/gpio-ath79.c                          |   3 +
 drivers/gpio/gpio-iop.c                            |   4 +
 drivers/gpio/gpio-stmpe.c                          |  20 +--
 drivers/gpio/gpiolib.c                             |   3 +
 drivers/hid/wacom_sys.c                            |  24 +--
 drivers/hid/wacom_wac.c                            |  16 +-
 drivers/iio/adc/stm32-adc.c                        |   3 +-
 drivers/iio/chemical/ccs811.c                      |  13 +-
 drivers/input/rmi4/rmi_driver.c                    |  14 +-
 drivers/input/rmi4/rmi_f03.c                       |  64 +++++--
 drivers/misc/mei/pci-me.c                          |   5 +-
 drivers/mtd/nand/denali_pci.c                      |   4 +
 drivers/net/ethernet/intel/igb/igb_main.c          |   2 +-
 drivers/power/reset/zx-reboot.c                    |   4 +
 drivers/scsi/aacraid/aachba.c                      |  15 +-
 drivers/scsi/aacraid/commsup.c                     |   9 +-
 drivers/scsi/storvsc_drv.c                         |   4 +-
 drivers/spi/spi-imx.c                              |  15 +-
 drivers/staging/ccree/ssi_cipher.c                 |   1 +
 drivers/staging/ccree/ssi_driver.c                 |   2 +-
 .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c    |   7 +-
 .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h    |   2 +-
 .../staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c |   6 +-
 drivers/tty/serial/8250/8250_dw.c                  |  30 ++--
 drivers/tty/serial/8250/8250_of.c                  |   5 +-
 drivers/tty/serial/8250/8250_uniphier.c            |   5 +-
 drivers/tty/serial/imx.c                           |  14 +-
 drivers/tty/tty_io.c                               |   8 +-
 drivers/tty/tty_ldisc.c                            |   4 +-
 drivers/usb/class/cdc-acm.c                        |   5 +-
 drivers/usb/gadget/function/f_fs.c                 |   3 +-
 drivers/usb/gadget/udc/core.c                      |   2 +-
 drivers/usb/serial/Kconfig                         |   1 +
 drivers/usb/serial/io_edgeport.c                   |   1 -
 drivers/usb/serial/option.c                        |   5 +
 drivers/usb/serial/pl2303.c                        |   1 +
 drivers/usb/serial/pl2303.h                        |   1 +
 drivers/usb/serial/usb-serial-simple.c             |   7 +
 drivers/usb/storage/uas.c                          |   7 +-
 include/linux/tty.h                                |   2 +
 lib/test_firmware.c                                |   1 +
 security/integrity/ima/ima_policy.c                |   2 +-
 sound/pci/hda/patch_realtek.c                      |   6 +-
 tools/gpio/gpio-event-mon.c                        |   1 +
 tools/usb/usbip/src/usbip_bind.c                   |   9 +
 tools/usb/usbip/src/usbip_list.c                   |   9 +
 57 files changed, 425 insertions(+), 310 deletions(-)

[PATCH 4.15 03/55] gpio: stmpe: i2c transfer are forbiden in atomic context

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrice Chotard <patrice.chotard@st.com>

commit b888fb6f2a278442933e3bfab70262e9a5365fb3 upstream.

Move the workaround from stmpe_gpio_irq_unmask() which is executed
in atomic context to stmpe_gpio_irq_sync_unlock() which is not.

It fixes the following issue:

[    1.500000] BUG: scheduling while atomic: swapper/1/0x00000002
[    1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28
[    1.520000] Hardware name: STM32 (Device Tree Support)
[    1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc)
[    1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58)
[    1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2)
[    1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64)
[    1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164)
[    1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc)
[    1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe)
[    1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148)
[    1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70)
[    1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e)
[    1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a)
[    1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24)
[    1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24)
[    1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22)
[    1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78)
[    1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c)
[    1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8)
[    1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a)
[    1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a)
[    1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60)
[    1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54)
[    1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c)
[    1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe)
[    1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8)
[    1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c)
[    1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46)
[    1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124)
[    1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a)
[    1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8)
[    1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134)
[    1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c)
[    1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c)

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-stmpe.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -190,6 +190,16 @@ static void stmpe_gpio_irq_sync_unlock(s
 	};
 	int i, j;
 
+	/*
+	 * STMPE1600: to be able to get IRQ from pins,
+	 * a read must be done on GPMR register, or a write in
+	 * GPSR or GPCR registers
+	 */
+	if (stmpe->partnum == STMPE1600) {
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
+	}
+
 	for (i = 0; i < CACHE_NR_REGS; i++) {
 		/* STMPE801 and STMPE1600 don't have RE and FE registers */
 		if ((stmpe->partnum == STMPE801 ||
@@ -227,21 +237,11 @@ static void stmpe_gpio_irq_unmask(struct
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
-	struct stmpe *stmpe = stmpe_gpio->stmpe;
 	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = BIT(offset % 8);
 
 	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
-
-	/*
-	 * STMPE1600 workaround: to be able to get IRQ from pins,
-	 * a read must be done on GPMR register, or a write in
-	 * GPSR or GPCR registers
-	 */
-	if (stmpe->partnum == STMPE1600)
-		stmpe_reg_read(stmpe,
-			       stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]);
 }
 
 static void stmpe_dbg_show_one(struct seq_file *s,

[PATCH 4.15 04/55] gpio: Fix kernel stack leak to userspace

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit 24bd3efc9d1efb5f756a7c6f807a36ddb6adc671 upstream.

The GPIO event descriptor was leaking kernel stack to
userspace because we don't zero the variable before
use. Ooops. Fix this.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -732,6 +732,9 @@ static irqreturn_t lineevent_irq_thread(
 	struct gpioevent_data ge;
 	int ret, level;
 
+	/* Do not leak kernel stack to userspace */
+	memset(&ge, 0, sizeof(ge));
+
 	ge.timestamp = ktime_get_real_ns();
 	level = gpiod_get_value_cansleep(le->desc);
 

[PATCH 4.15 05/55] ALSA: hda - Reduce the suspend time consumption for ALC256

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 1c9609e3a8cf5997bd35205cfda1ff2218ee793b upstream.

ALC256 has its own quirk to override the shutup call, and it contains
the COEF update for pulling down the headset jack control.  Currently,
the COEF update is called after clearing the headphone pin, and this
seems triggering a stall of the codec communication, and results in a
long delay over a second at suspend.

A quick resolution is to swap the calls: at first with the COEF
update, then clear the headphone pin.

Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198503
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3154,11 +3154,13 @@ static void alc256_shutup(struct hda_cod
 	if (hp_pin_sense)
 		msleep(85);
 
+	/* 3k pull low control for Headset jack. */
+	/* NOTE: call this before clearing the pin, otherwise codec stalls */
+	alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
+
 	snd_hda_codec_write(codec, hp_pin, 0,
 			    AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
 
-	alc_update_coef_idx(codec, 0x46, 0, 3 << 12); /* 3k pull low control for Headset jack. */
-
 	if (hp_pin_sense)
 		msleep(100);
 

[PATCH 4.15 06/55] crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hauke Mehrtens <hauke@hauke-m.de>

commit b5b9007730ce1d90deaf25d7f678511550744bdc upstream.

This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH.

Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -130,7 +130,7 @@ config CRYPTO_DH
 
 config CRYPTO_ECDH
 	tristate "ECDH algorithm"
-	select CRYTPO_KPP
+	select CRYPTO_KPP
 	select CRYPTO_RNG_DEFAULT
 	help
 	  Generic implementation of the ECDH algorithm

[PATCH 4.15 07/55] crypto: aesni - handle zero length dst buffer

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Mueller <smueller@chronox.de>

commit 9c674e1e2f9e24fa4392167efe343749008338e0 upstream.

GCM can be invoked with a zero destination buffer. This is possible if
the AAD and the ciphertext have zero lengths and only the tag exists in
the source buffer (i.e. a source buffer cannot be zero). In this case,
the GCM cipher only performs the authentication and no decryption
operation.

When the destination buffer has zero length, it is possible that no page
is mapped to the SG pointing to the destination. In this case,
sg_page(req->dst) is an invalid access. Therefore, page accesses should
only be allowed if the req->dst->length is non-zero which is the
indicator that a page must exist.

This fixes a crash that can be triggered by user space via AF_ALG.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_glue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -824,7 +824,7 @@ static int gcmaes_decrypt(struct aead_re
 	if (sg_is_last(req->src) &&
 	    (!PageHighMem(sg_page(req->src)) ||
 	    req->src->offset + req->src->length <= PAGE_SIZE) &&
-	    sg_is_last(req->dst) &&
+	    sg_is_last(req->dst) && req->dst->length &&
 	    (!PageHighMem(sg_page(req->dst)) ||
 	    req->dst->offset + req->dst->length <= PAGE_SIZE)) {
 		one_entry_in_sg = 1;

[PATCH 4.15 08/55] crypto: aesni - fix typo in generic_gcmaes_decrypt

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <sd@queasysnail.net>

commit 106840c41096a01079d3a2025225029c13713802 upstream.

generic_gcmaes_decrypt needs to use generic_gcmaes_ctx, not
aesni_rfc4106_gcm_ctx. This is actually harmless because the fields in
struct generic_gcmaes_ctx share the layout of the same fields in
aesni_rfc4106_gcm_ctx.

Fixes: cce2ea8d90fe ("crypto: aesni - add generic gcm(aes)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_glue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1117,7 +1117,7 @@ static int generic_gcmaes_decrypt(struct
 {
 	__be32 counter = cpu_to_be32(1);
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
-	struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm);
+	struct generic_gcmaes_ctx *ctx = generic_gcmaes_ctx_get(tfm);
 	void *aes_ctx = &(ctx->aes_key_expanded);
 	u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN)));
 

[PATCH 4.15 09/55] crypto: aesni - add wrapper for generic gcm(aes)

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <sd@queasysnail.net>

commit fc8517bf627c9b834f80274a1bc9ecd39b27231b upstream.

When I added generic-gcm-aes I didn't add a wrapper like the one
provided for rfc4106(gcm(aes)). We need to add a cryptd wrapper to fall
back on in case the FPU is not available, otherwise we might corrupt the
FPU state.

Fixes: cce2ea8d90fe ("crypto: aesni - add generic gcm(aes)")
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_glue.c |   66 ++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 12 deletions(-)

--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -690,8 +690,8 @@ static int common_rfc4106_set_key(struct
 	       rfc4106_set_hash_subkey(ctx->hash_subkey, key, key_len);
 }
 
-static int rfc4106_set_key(struct crypto_aead *parent, const u8 *key,
-			   unsigned int key_len)
+static int gcmaes_wrapper_set_key(struct crypto_aead *parent, const u8 *key,
+				  unsigned int key_len)
 {
 	struct cryptd_aead **ctx = crypto_aead_ctx(parent);
 	struct cryptd_aead *cryptd_tfm = *ctx;
@@ -716,8 +716,8 @@ static int common_rfc4106_set_authsize(s
 
 /* This is the Integrity Check Value (aka the authentication tag length and can
  * be 8, 12 or 16 bytes long. */
-static int rfc4106_set_authsize(struct crypto_aead *parent,
-				unsigned int authsize)
+static int gcmaes_wrapper_set_authsize(struct crypto_aead *parent,
+				       unsigned int authsize)
 {
 	struct cryptd_aead **ctx = crypto_aead_ctx(parent);
 	struct cryptd_aead *cryptd_tfm = *ctx;
@@ -929,7 +929,7 @@ static int helper_rfc4106_decrypt(struct
 			      aes_ctx);
 }
 
-static int rfc4106_encrypt(struct aead_request *req)
+static int gcmaes_wrapper_encrypt(struct aead_request *req)
 {
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
 	struct cryptd_aead **ctx = crypto_aead_ctx(tfm);
@@ -945,7 +945,7 @@ static int rfc4106_encrypt(struct aead_r
 	return crypto_aead_encrypt(req);
 }
 
-static int rfc4106_decrypt(struct aead_request *req)
+static int gcmaes_wrapper_decrypt(struct aead_request *req)
 {
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
 	struct cryptd_aead **ctx = crypto_aead_ctx(tfm);
@@ -1128,6 +1128,30 @@ static int generic_gcmaes_decrypt(struct
 			      aes_ctx);
 }
 
+static int generic_gcmaes_init(struct crypto_aead *aead)
+{
+	struct cryptd_aead *cryptd_tfm;
+	struct cryptd_aead **ctx = crypto_aead_ctx(aead);
+
+	cryptd_tfm = cryptd_alloc_aead("__driver-generic-gcm-aes-aesni",
+				       CRYPTO_ALG_INTERNAL,
+				       CRYPTO_ALG_INTERNAL);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+
+	*ctx = cryptd_tfm;
+	crypto_aead_set_reqsize(aead, crypto_aead_reqsize(&cryptd_tfm->base));
+
+	return 0;
+}
+
+static void generic_gcmaes_exit(struct crypto_aead *aead)
+{
+	struct cryptd_aead **ctx = crypto_aead_ctx(aead);
+
+	cryptd_free_aead(*ctx);
+}
+
 static struct aead_alg aesni_aead_algs[] = { {
 	.setkey			= common_rfc4106_set_key,
 	.setauthsize		= common_rfc4106_set_authsize,
@@ -1147,10 +1171,10 @@ static struct aead_alg aesni_aead_algs[]
 }, {
 	.init			= rfc4106_init,
 	.exit			= rfc4106_exit,
-	.setkey			= rfc4106_set_key,
-	.setauthsize		= rfc4106_set_authsize,
-	.encrypt		= rfc4106_encrypt,
-	.decrypt		= rfc4106_decrypt,
+	.setkey			= gcmaes_wrapper_set_key,
+	.setauthsize		= gcmaes_wrapper_set_authsize,
+	.encrypt		= gcmaes_wrapper_encrypt,
+	.decrypt		= gcmaes_wrapper_decrypt,
 	.ivsize			= GCM_RFC4106_IV_SIZE,
 	.maxauthsize		= 16,
 	.base = {
@@ -1170,13 +1194,31 @@ static struct aead_alg aesni_aead_algs[]
 	.ivsize			= GCM_AES_IV_SIZE,
 	.maxauthsize		= 16,
 	.base = {
+		.cra_name		= "__generic-gcm-aes-aesni",
+		.cra_driver_name	= "__driver-generic-gcm-aes-aesni",
+		.cra_priority		= 0,
+		.cra_flags		= CRYPTO_ALG_INTERNAL,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct generic_gcmaes_ctx),
+		.cra_alignmask		= AESNI_ALIGN - 1,
+		.cra_module		= THIS_MODULE,
+	},
+}, {
+	.init			= generic_gcmaes_init,
+	.exit			= generic_gcmaes_exit,
+	.setkey			= gcmaes_wrapper_set_key,
+	.setauthsize		= gcmaes_wrapper_set_authsize,
+	.encrypt		= gcmaes_wrapper_encrypt,
+	.decrypt		= gcmaes_wrapper_decrypt,
+	.ivsize			= GCM_AES_IV_SIZE,
+	.maxauthsize		= 16,
+	.base = {
 		.cra_name		= "gcm(aes)",
 		.cra_driver_name	= "generic-gcm-aesni",
 		.cra_priority		= 400,
 		.cra_flags		= CRYPTO_ALG_ASYNC,
 		.cra_blocksize		= 1,
-		.cra_ctxsize		= sizeof(struct generic_gcmaes_ctx),
-		.cra_alignmask		= AESNI_ALIGN - 1,
+		.cra_ctxsize		= sizeof(struct cryptd_aead *),
 		.cra_module		= THIS_MODULE,
 	},
 } };

[PATCH 4.15 10/55] crypto: aesni - Fix out-of-bounds access of the data buffer in generic-gcm-aesni

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Junaid Shahid <junaids@google.com>

commit b20209c91e23a9bbad9cac2f80bc16b3c259e10e upstream.

The aesni_gcm_enc/dec functions can access memory before the start of
the data buffer if the length of the data buffer is less than 16 bytes.
This is because they perform the read via a single 16-byte load. This
can potentially result in accessing a page that is not mapped and thus
causing the machine to crash. This patch fixes that by reading the
partial block byte-by-byte and optionally an via 8-byte load if the block
was at least 8 bytes.

Fixes: 0487ccac ("crypto: aesni - make non-AVX AES-GCM work with any aadlen")
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_asm.S |   87 +++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 42 deletions(-)

--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -257,6 +257,37 @@ aad_shift_arr:
 	pxor      \TMP1, \GH            # result is in TMP1
 .endm
 
+# Reads DLEN bytes starting at DPTR and stores in XMMDst
+# where 0 < DLEN < 16
+# Clobbers %rax, DLEN and XMM1
+.macro READ_PARTIAL_BLOCK DPTR DLEN XMM1 XMMDst
+        cmp $8, \DLEN
+        jl _read_lt8_\@
+        mov (\DPTR), %rax
+        MOVQ_R64_XMM %rax, \XMMDst
+        sub $8, \DLEN
+        jz _done_read_partial_block_\@
+	xor %eax, %eax
+_read_next_byte_\@:
+        shl $8, %rax
+        mov 7(\DPTR, \DLEN, 1), %al
+        dec \DLEN
+        jnz _read_next_byte_\@
+        MOVQ_R64_XMM %rax, \XMM1
+	pslldq $8, \XMM1
+        por \XMM1, \XMMDst
+	jmp _done_read_partial_block_\@
+_read_lt8_\@:
+	xor %eax, %eax
+_read_next_byte_lt8_\@:
+        shl $8, %rax
+        mov -1(\DPTR, \DLEN, 1), %al
+        dec \DLEN
+        jnz _read_next_byte_lt8_\@
+        MOVQ_R64_XMM %rax, \XMMDst
+_done_read_partial_block_\@:
+.endm
+
 /*
 * if a = number of total plaintext bytes
 * b = floor(a/16)
@@ -1386,14 +1417,6 @@ _esb_loop_\@:
 *
 *                        AAD Format with 64-bit Extended Sequence Number
 *
-* aadLen:
-*       from the definition of the spec, aadLen can only be 8 or 12 bytes.
-*       The code supports 16 too but for other sizes, the code will fail.
-*
-* TLen:
-*       from the definition of the spec, TLen can only be 8, 12 or 16 bytes.
-*       For other sizes, the code will fail.
-*
 * poly = x^128 + x^127 + x^126 + x^121 + 1
 *
 *****************************************************************************/
@@ -1487,19 +1510,16 @@ _zero_cipher_left_decrypt:
 	PSHUFB_XMM %xmm10, %xmm0
 
 	ENCRYPT_SINGLE_BLOCK  %xmm0, %xmm1    # E(K, Yn)
-	sub $16, %r11
-	add %r13, %r11
-	movdqu (%arg3,%r11,1), %xmm1   # receive the last <16 byte block
-	lea SHIFT_MASK+16(%rip), %r12
-	sub %r13, %r12
-# adjust the shuffle mask pointer to be able to shift 16-%r13 bytes
-# (%r13 is the number of bytes in plaintext mod 16)
-	movdqu (%r12), %xmm2           # get the appropriate shuffle mask
-	PSHUFB_XMM %xmm2, %xmm1            # right shift 16-%r13 butes
 
+	lea (%arg3,%r11,1), %r10
+	mov %r13, %r12
+	READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1
+
+	lea ALL_F+16(%rip), %r12
+	sub %r13, %r12
 	movdqa  %xmm1, %xmm2
 	pxor %xmm1, %xmm0            # Ciphertext XOR E(K, Yn)
-	movdqu ALL_F-SHIFT_MASK(%r12), %xmm1
+	movdqu (%r12), %xmm1
 	# get the appropriate mask to mask out top 16-%r13 bytes of %xmm0
 	pand %xmm1, %xmm0            # mask out top 16-%r13 bytes of %xmm0
 	pand    %xmm1, %xmm2
@@ -1508,9 +1528,6 @@ _zero_cipher_left_decrypt:
 
 	pxor %xmm2, %xmm8
 	GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
-	          # GHASH computation for the last <16 byte block
-	sub %r13, %r11
-	add $16, %r11
 
         # output %r13 bytes
 	MOVQ_R64_XMM	%xmm0, %rax
@@ -1664,14 +1681,6 @@ ENDPROC(aesni_gcm_dec)
 *
 *                         AAD Format with 64-bit Extended Sequence Number
 *
-* aadLen:
-*       from the definition of the spec, aadLen can only be 8 or 12 bytes.
-*       The code supports 16 too but for other sizes, the code will fail.
-*
-* TLen:
-*       from the definition of the spec, TLen can only be 8, 12 or 16 bytes.
-*       For other sizes, the code will fail.
-*
 * poly = x^128 + x^127 + x^126 + x^121 + 1
 ***************************************************************************/
 ENTRY(aesni_gcm_enc)
@@ -1764,19 +1773,16 @@ _zero_cipher_left_encrypt:
         movdqa SHUF_MASK(%rip), %xmm10
 	PSHUFB_XMM %xmm10, %xmm0
 
-
 	ENCRYPT_SINGLE_BLOCK	%xmm0, %xmm1        # Encrypt(K, Yn)
-	sub $16, %r11
-	add %r13, %r11
-	movdqu (%arg3,%r11,1), %xmm1     # receive the last <16 byte blocks
-	lea SHIFT_MASK+16(%rip), %r12
+
+	lea (%arg3,%r11,1), %r10
+	mov %r13, %r12
+	READ_PARTIAL_BLOCK %r10 %r12 %xmm2 %xmm1
+
+	lea ALL_F+16(%rip), %r12
 	sub %r13, %r12
-	# adjust the shuffle mask pointer to be able to shift 16-r13 bytes
-	# (%r13 is the number of bytes in plaintext mod 16)
-	movdqu	(%r12), %xmm2           # get the appropriate shuffle mask
-	PSHUFB_XMM	%xmm2, %xmm1            # shift right 16-r13 byte
 	pxor	%xmm1, %xmm0            # Plaintext XOR Encrypt(K, Yn)
-	movdqu	ALL_F-SHIFT_MASK(%r12), %xmm1
+	movdqu	(%r12), %xmm1
 	# get the appropriate mask to mask out top 16-r13 bytes of xmm0
 	pand	%xmm1, %xmm0            # mask out top 16-r13 bytes of xmm0
         movdqa SHUF_MASK(%rip), %xmm10
@@ -1785,9 +1791,6 @@ _zero_cipher_left_encrypt:
 	pxor	%xmm0, %xmm8
 	GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
 	# GHASH computation for the last <16 byte block
-	sub	%r13, %r11
-	add	$16, %r11
-
 	movdqa SHUF_MASK(%rip), %xmm10
 	PSHUFB_XMM %xmm10, %xmm0
 

[PATCH 4.15 11/55] crypto: aesni - Fix out-of-bounds access of the AAD buffer in generic-gcm-aesni

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Junaid Shahid <junaids@google.com>

commit 1ecdd37e308ca149dc378cce225068cbac54e3a6 upstream.

The aesni_gcm_enc/dec functions can access memory after the end of
the AAD buffer if the AAD length is not a multiple of 4 bytes.
It didn't matter with rfc4106-gcm-aesni as in that case the AAD was
always followed by the 8 byte IV, but that is no longer the case with
generic-gcm-aesni. This can potentially result in accessing a page that
is not mapped and thus causing the machine to crash. This patch fixes
that by reading the last <16 byte block of the AAD byte-by-byte and
optionally via an 8-byte load if the block was at least 8 bytes.

Fixes: 0487ccac ("crypto: aesni - make non-AVX AES-GCM work with any aadlen")
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_asm.S |  112 ++++----------------------------------
 1 file changed, 12 insertions(+), 100 deletions(-)

--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -90,30 +90,6 @@ SHIFT_MASK: .octa 0x0f0e0d0c0b0a09080706
 ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
             .octa 0x00000000000000000000000000000000
 
-.section .rodata
-.align 16
-.type aad_shift_arr, @object
-.size aad_shift_arr, 272
-aad_shift_arr:
-        .octa     0xffffffffffffffffffffffffffffffff
-        .octa     0xffffffffffffffffffffffffffffff0C
-        .octa     0xffffffffffffffffffffffffffff0D0C
-        .octa     0xffffffffffffffffffffffffff0E0D0C
-        .octa     0xffffffffffffffffffffffff0F0E0D0C
-        .octa     0xffffffffffffffffffffff0C0B0A0908
-        .octa     0xffffffffffffffffffff0D0C0B0A0908
-        .octa     0xffffffffffffffffff0E0D0C0B0A0908
-        .octa     0xffffffffffffffff0F0E0D0C0B0A0908
-        .octa     0xffffffffffffff0C0B0A090807060504
-        .octa     0xffffffffffff0D0C0B0A090807060504
-        .octa     0xffffffffff0E0D0C0B0A090807060504
-        .octa     0xffffffff0F0E0D0C0B0A090807060504
-        .octa     0xffffff0C0B0A09080706050403020100
-        .octa     0xffff0D0C0B0A09080706050403020100
-        .octa     0xff0E0D0C0B0A09080706050403020100
-        .octa     0x0F0E0D0C0B0A09080706050403020100
-
-
 .text
 
 
@@ -304,62 +280,30 @@ _done_read_partial_block_\@:
 XMM2 XMM3 XMM4 XMMDst TMP6 TMP7 i i_seq operation
         MOVADQ     SHUF_MASK(%rip), %xmm14
 	mov	   arg7, %r10           # %r10 = AAD
-	mov	   arg8, %r12           # %r12 = aadLen
-	mov	   %r12, %r11
+	mov	   arg8, %r11           # %r11 = aadLen
 	pxor	   %xmm\i, %xmm\i
 	pxor       \XMM2, \XMM2
 
 	cmp	   $16, %r11
-	jl	   _get_AAD_rest8\num_initial_blocks\operation
+	jl	   _get_AAD_rest\num_initial_blocks\operation
 _get_AAD_blocks\num_initial_blocks\operation:
 	movdqu	   (%r10), %xmm\i
 	PSHUFB_XMM %xmm14, %xmm\i # byte-reflect the AAD data
 	pxor	   %xmm\i, \XMM2
 	GHASH_MUL  \XMM2, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
 	add	   $16, %r10
-	sub	   $16, %r12
 	sub	   $16, %r11
 	cmp	   $16, %r11
 	jge	   _get_AAD_blocks\num_initial_blocks\operation
 
 	movdqu	   \XMM2, %xmm\i
+
+	/* read the last <16B of AAD */
+_get_AAD_rest\num_initial_blocks\operation:
 	cmp	   $0, %r11
 	je	   _get_AAD_done\num_initial_blocks\operation
 
-	pxor	   %xmm\i,%xmm\i
-
-	/* read the last <16B of AAD. since we have at least 4B of
-	data right after the AAD (the ICV, and maybe some CT), we can
-	read 4B/8B blocks safely, and then get rid of the extra stuff */
-_get_AAD_rest8\num_initial_blocks\operation:
-	cmp	   $4, %r11
-	jle	   _get_AAD_rest4\num_initial_blocks\operation
-	movq	   (%r10), \TMP1
-	add	   $8, %r10
-	sub	   $8, %r11
-	pslldq	   $8, \TMP1
-	psrldq	   $8, %xmm\i
-	pxor	   \TMP1, %xmm\i
-	jmp	   _get_AAD_rest8\num_initial_blocks\operation
-_get_AAD_rest4\num_initial_blocks\operation:
-	cmp	   $0, %r11
-	jle	   _get_AAD_rest0\num_initial_blocks\operation
-	mov	   (%r10), %eax
-	movq	   %rax, \TMP1
-	add	   $4, %r10
-	sub	   $4, %r10
-	pslldq	   $12, \TMP1
-	psrldq	   $4, %xmm\i
-	pxor	   \TMP1, %xmm\i
-_get_AAD_rest0\num_initial_blocks\operation:
-	/* finalize: shift out the extra bytes we read, and align
-	left. since pslldq can only shift by an immediate, we use
-	vpshufb and an array of shuffle masks */
-	movq	   %r12, %r11
-	salq	   $4, %r11
-	movdqu	   aad_shift_arr(%r11), \TMP1
-	PSHUFB_XMM \TMP1, %xmm\i
-_get_AAD_rest_final\num_initial_blocks\operation:
+	READ_PARTIAL_BLOCK %r10, %r11, \TMP1, %xmm\i
 	PSHUFB_XMM   %xmm14, %xmm\i # byte-reflect the AAD data
 	pxor	   \XMM2, %xmm\i
 	GHASH_MUL  %xmm\i, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
@@ -563,62 +507,30 @@ _initial_blocks_done\num_initial_blocks\
 XMM2 XMM3 XMM4 XMMDst TMP6 TMP7 i i_seq operation
         MOVADQ     SHUF_MASK(%rip), %xmm14
 	mov	   arg7, %r10           # %r10 = AAD
-	mov	   arg8, %r12           # %r12 = aadLen
-	mov	   %r12, %r11
+	mov	   arg8, %r11           # %r11 = aadLen
 	pxor	   %xmm\i, %xmm\i
 	pxor	   \XMM2, \XMM2
 
 	cmp	   $16, %r11
-	jl	   _get_AAD_rest8\num_initial_blocks\operation
+	jl	   _get_AAD_rest\num_initial_blocks\operation
 _get_AAD_blocks\num_initial_blocks\operation:
 	movdqu	   (%r10), %xmm\i
 	PSHUFB_XMM   %xmm14, %xmm\i # byte-reflect the AAD data
 	pxor	   %xmm\i, \XMM2
 	GHASH_MUL  \XMM2, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
 	add	   $16, %r10
-	sub	   $16, %r12
 	sub	   $16, %r11
 	cmp	   $16, %r11
 	jge	   _get_AAD_blocks\num_initial_blocks\operation
 
 	movdqu	   \XMM2, %xmm\i
+
+	/* read the last <16B of AAD */
+_get_AAD_rest\num_initial_blocks\operation:
 	cmp	   $0, %r11
 	je	   _get_AAD_done\num_initial_blocks\operation
 
-	pxor	   %xmm\i,%xmm\i
-
-	/* read the last <16B of AAD. since we have at least 4B of
-	data right after the AAD (the ICV, and maybe some PT), we can
-	read 4B/8B blocks safely, and then get rid of the extra stuff */
-_get_AAD_rest8\num_initial_blocks\operation:
-	cmp	   $4, %r11
-	jle	   _get_AAD_rest4\num_initial_blocks\operation
-	movq	   (%r10), \TMP1
-	add	   $8, %r10
-	sub	   $8, %r11
-	pslldq	   $8, \TMP1
-	psrldq	   $8, %xmm\i
-	pxor	   \TMP1, %xmm\i
-	jmp	   _get_AAD_rest8\num_initial_blocks\operation
-_get_AAD_rest4\num_initial_blocks\operation:
-	cmp	   $0, %r11
-	jle	   _get_AAD_rest0\num_initial_blocks\operation
-	mov	   (%r10), %eax
-	movq	   %rax, \TMP1
-	add	   $4, %r10
-	sub	   $4, %r10
-	pslldq	   $12, \TMP1
-	psrldq	   $4, %xmm\i
-	pxor	   \TMP1, %xmm\i
-_get_AAD_rest0\num_initial_blocks\operation:
-	/* finalize: shift out the extra bytes we read, and align
-	left. since pslldq can only shift by an immediate, we use
-	vpshufb and an array of shuffle masks */
-	movq	   %r12, %r11
-	salq	   $4, %r11
-	movdqu	   aad_shift_arr(%r11), \TMP1
-	PSHUFB_XMM \TMP1, %xmm\i
-_get_AAD_rest_final\num_initial_blocks\operation:
+	READ_PARTIAL_BLOCK %r10, %r11, \TMP1, %xmm\i
 	PSHUFB_XMM   %xmm14, %xmm\i # byte-reflect the AAD data
 	pxor	   \XMM2, %xmm\i
 	GHASH_MUL  %xmm\i, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1

[PATCH 4.15 12/55] crypto: inside-secure - fix hash when length is a multiple of a block

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@free-electrons.com>

commit 809778e02cd45d0625439fee67688f655627bb3c upstream.

This patch fixes the hash support in the SafeXcel driver when the update
size is a multiple of a block size, and when a final call is made just
after with a size of 0. In such cases the driver should cache the last
block from the update to avoid handling 0 length data on the final call
(that's a hardware limitation).

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/inside-secure/safexcel_hash.c |   34 +++++++++++++++++++--------
 1 file changed, 24 insertions(+), 10 deletions(-)

--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -186,17 +186,31 @@ static int safexcel_ahash_send_req(struc
 	else
 		cache_len = queued - areq->nbytes;
 
-	/*
-	 * If this is not the last request and the queued data does not fit
-	 * into full blocks, cache it for the next send() call.
-	 */
-	extra = queued & (crypto_ahash_blocksize(ahash) - 1);
-	if (!req->last_req && extra) {
-		sg_pcopy_to_buffer(areq->src, sg_nents(areq->src),
-				   req->cache_next, extra, areq->nbytes - extra);
+	if (!req->last_req) {
+		/* If this is not the last request and the queued data does not
+		 * fit into full blocks, cache it for the next send() call.
+		 */
+		extra = queued & (crypto_ahash_blocksize(ahash) - 1);
+		if (!extra)
+			/* If this is not the last request and the queued data
+			 * is a multiple of a block, cache the last one for now.
+			 */
+			extra = queued - crypto_ahash_blocksize(ahash);
 
-		queued -= extra;
-		len -= extra;
+		if (extra) {
+			sg_pcopy_to_buffer(areq->src, sg_nents(areq->src),
+					   req->cache_next, extra,
+					   areq->nbytes - extra);
+
+			queued -= extra;
+			len -= extra;
+
+			if (!queued) {
+				*commands = 0;
+				*results = 0;
+				return 0;
+			}
+		}
 	}
 
 	spin_lock_bh(&priv->ring[ring].egress_lock);

[PATCH 4.15 13/55] crypto: inside-secure - avoid unmapping DMA memory that was not mapped

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoine Tenart <antoine.tenart@free-electrons.com>

commit c957f8b3e2e54b29f53ef69decc87bbc858c9b58 upstream.

This patch adds a parameter in the SafeXcel ahash request structure to
keep track of the number of SG entries mapped. This allows not to call
dma_unmap_sg() when dma_map_sg() wasn't called in the first place. This
also removes a warning when the debugging of the DMA-API is enabled in
the kernel configuration: "DMA-API: device driver tries to free DMA
memory it has not allocated".

Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/inside-secure/safexcel_hash.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -34,6 +34,8 @@ struct safexcel_ahash_req {
 	bool hmac;
 	bool needs_inv;
 
+	int nents;
+
 	u8 state_sz;    /* expected sate size, only set once */
 	u32 state[SHA256_DIGEST_SIZE / sizeof(u32)] __aligned(sizeof(u32));
 
@@ -152,8 +154,10 @@ static int safexcel_handle_req_result(st
 		memcpy(areq->result, sreq->state,
 		       crypto_ahash_digestsize(ahash));
 
-	dma_unmap_sg(priv->dev, areq->src,
-		     sg_nents_for_len(areq->src, areq->nbytes), DMA_TO_DEVICE);
+	if (sreq->nents) {
+		dma_unmap_sg(priv->dev, areq->src, sreq->nents, DMA_TO_DEVICE);
+		sreq->nents = 0;
+	}
 
 	safexcel_free_context(priv, async, sreq->state_sz);
 
@@ -178,7 +182,7 @@ static int safexcel_ahash_send_req(struc
 	struct safexcel_command_desc *cdesc, *first_cdesc = NULL;
 	struct safexcel_result_desc *rdesc;
 	struct scatterlist *sg;
-	int i, nents, queued, len, cache_len, extra, n_cdesc = 0, ret = 0;
+	int i, queued, len, cache_len, extra, n_cdesc = 0, ret = 0;
 
 	queued = len = req->len - req->processed;
 	if (queued < crypto_ahash_blocksize(ahash))
@@ -248,15 +252,15 @@ static int safexcel_ahash_send_req(struc
 	}
 
 	/* Now handle the current ahash request buffer(s) */
-	nents = dma_map_sg(priv->dev, areq->src,
-		       sg_nents_for_len(areq->src, areq->nbytes),
-		       DMA_TO_DEVICE);
-	if (!nents) {
+	req->nents = dma_map_sg(priv->dev, areq->src,
+				sg_nents_for_len(areq->src, areq->nbytes),
+				DMA_TO_DEVICE);
+	if (!req->nents) {
 		ret = -ENOMEM;
 		goto cdesc_rollback;
 	}
 
-	for_each_sg(areq->src, sg, nents, i) {
+	for_each_sg(areq->src, sg, req->nents, i) {
 		int sglen = sg_dma_len(sg);
 
 		/* Do not overflow the request */

[PATCH 4.15 14/55] crypto: sha3-generic - fixes for alignment and big endian operation

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit c013cee99d5a18aec8c71fee8f5f41369cd12595 upstream.

Ensure that the input is byte swabbed before injecting it into the
SHA3 transform. Use the get_unaligned() accessor for this so that
we don't perform unaligned access inadvertently on architectures
that do not support that.

Fixes: 53964b9ee63b7075 ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/sha3_generic.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/crypto/sha3_generic.c
+++ b/crypto/sha3_generic.c
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <crypto/sha3.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 #define KECCAK_ROUNDS 24
 
@@ -149,7 +150,7 @@ static int sha3_update(struct shash_desc
 			unsigned int i;
 
 			for (i = 0; i < sctx->rsizw; i++)
-				sctx->st[i] ^= ((u64 *) src)[i];
+				sctx->st[i] ^= get_unaligned_le64(src + 8 * i);
 			keccakf(sctx->st);
 
 			done += sctx->rsiz;
@@ -174,7 +175,7 @@ static int sha3_final(struct shash_desc
 	sctx->buf[sctx->rsiz - 1] |= 0x80;
 
 	for (i = 0; i < sctx->rsizw; i++)
-		sctx->st[i] ^= ((u64 *) sctx->buf)[i];
+		sctx->st[i] ^= get_unaligned_le64(sctx->buf + 8 * i);
 
 	keccakf(sctx->st);
 

[PATCH 4.15 15/55] crypto: af_alg - whitelist mask and type

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Mueller <smueller@chronox.de>

commit bb30b8848c85e18ca7e371d0a869e94b3e383bdf upstream.

The user space interface allows specifying the type and mask field used
to allocate the cipher. Only a subset of the possible flags are intended
for user space. Therefore, white-list the allowed flags.

In case the user space caller uses at least one non-allowed flag, EINVAL
is returned.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/af_alg.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -150,7 +150,7 @@ EXPORT_SYMBOL_GPL(af_alg_release_parent)
 
 static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 {
-	const u32 forbidden = CRYPTO_ALG_INTERNAL;
+	const u32 allowed = CRYPTO_ALG_KERN_DRIVER_ONLY;
 	struct sock *sk = sock->sk;
 	struct alg_sock *ask = alg_sk(sk);
 	struct sockaddr_alg *sa = (void *)uaddr;
@@ -158,6 +158,10 @@ static int alg_bind(struct socket *sock,
 	void *private;
 	int err;
 
+	/* If caller uses non-allowed flag, return error. */
+	if ((sa->salg_feat & ~allowed) || (sa->salg_mask & ~allowed))
+		return -EINVAL;
+
 	if (sock->state == SS_CONNECTED)
 		return -EINVAL;
 
@@ -176,9 +180,7 @@ static int alg_bind(struct socket *sock,
 	if (IS_ERR(type))
 		return PTR_ERR(type);
 
-	private = type->bind(sa->salg_name,
-			     sa->salg_feat & ~forbidden,
-			     sa->salg_mask & ~forbidden);
+	private = type->bind(sa->salg_name, sa->salg_feat, sa->salg_mask);
 	if (IS_ERR(private)) {
 		module_put(type->owner);
 		return PTR_ERR(private);

[PATCH 4.15 16/55] HID: wacom: EKR: ensure devres groups at higher indexes are released

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Armstrong Skomra <skomra@gmail.com>

commit 791ae273731fa85d3332e45064dab177ae663e80 upstream.

Background: ExpressKey Remotes communicate their events via usb dongle.
Each dongle can hold up to 5 pairings at one time and one EKR (identified
by its serial number) can unfortunately be paired with its dongle
more than once. The pairing takes place in a round-robin fashion.

Input devices are only created once per EKR, when a new serial number
is seen in the list of pairings. However, if a device is created for
a "higher" paring index and subsequently a second pairing occurs at a
lower pairing index, unpairing the remote with that serial number from
any pairing index will currently cause a driver crash. This occurs
infrequently, as two remotes are necessary to trigger this bug and most
users have only one remote.

As an illustration, to trigger the bug you need to have two remotes,
and pair them in this order:

1. slot 0 -> remote 1 (input device created for remote 1)
2. slot 1 -> remote 1 (duplicate pairing - no device created)
3. slot 2 -> remote 1 (duplicate pairing - no device created)
4. slot 3 -> remote 1 (duplicate pairing - no device created)
5. slot 4 -> remote 2 (input device created for remote 2)

6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1)
7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2)
8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3)
9. slot 3 -> remote 2 (1 destroyed and not recreated)
10. slot 4 -> remote 2 (2 was already in this slot so no changes)

11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in
                        one of the dongle slots it occupied and attempts
                        to remove all information about remote 2 [1]. It
                        calls wacom_remote_destroy_one for remote 2, but
                        the destroy function assumes the lowest index is
                        where the remote's input device was created. The
                        code "cleans up" the other remote 2 pairings
                        including the one which the input device was based
                        on, assuming they were were just duplicate
                        pairings. However, the cleanup doesn't call the
                        devres release function for the input device that
                        was created in slot 4).

This issue is fixed by this commit.

[1] Remote 2 should subsequently be re-created on the next packet from the
EKR at the lowest numbered slot that it occupies (here slot 1).

Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources")
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_sys.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2347,23 +2347,23 @@ static void wacom_remote_destroy_one(str
 	int i;
 	unsigned long flags;
 
-	spin_lock_irqsave(&remote->remote_lock, flags);
-	remote->remotes[index].registered = false;
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial) {
 
-	if (remote->remotes[index].battery.battery)
-		devres_release_group(&wacom->hdev->dev,
-				     &remote->remotes[index].battery.bat_desc);
+			spin_lock_irqsave(&remote->remote_lock, flags);
+			remote->remotes[i].registered = false;
+			spin_unlock_irqrestore(&remote->remote_lock, flags);
 
-	if (remote->remotes[index].group.name)
-		devres_release_group(&wacom->hdev->dev,
-				     &remote->remotes[index]);
+			if (remote->remotes[i].battery.battery)
+				devres_release_group(&wacom->hdev->dev,
+						     &remote->remotes[i].battery.bat_desc);
+
+			if (remote->remotes[i].group.name)
+				devres_release_group(&wacom->hdev->dev,
+						     &remote->remotes[i]);
 
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial) {
 			remote->remotes[i].serial = 0;
 			remote->remotes[i].group.name = NULL;
-			remote->remotes[i].registered = false;
 			remote->remotes[i].battery.battery = NULL;
 			wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
 		}

[PATCH 4.15 17/55] HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Gerecke <killertofu@gmail.com>

commit 403c0f681c1964ff1db8c2fb8de8c4067779d081 upstream.

Touch toggle softkeys send a '1' while pressed and a '0' while released,
requring the kernel to keep track of wether touch should be enabled or
disabled. The code does not handle the state transitions properly,
however. If the key is pressed repeatedly, the following four states
of states are cycled through (assuming touch starts out enabled):

Press:   shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Release: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Press:   shared->is_touch_on => 1, SW_MUTE_DEVICE => 0
Release: shared->is_touch_on => 1, SW_MUTE_DEVICE => 1

The hardware always properly enables/disables touch when the key is
pressed but applications that listen for SW_MUTE_DEVICE events to provide
feedback about the state will only ever show touch as being enabled while
the key is held, and only every-other time. This sequence occurs because
the fallthrough WACOM_HID_WD_TOUCHONOFF case is always handled, and it
uses the value of the *local* is_touch_on variable as the value to
report to userspace. The local value is equal to the shared value when
the button is pressed, but equal to zero when the button is released.

Reporting the shared value to userspace fixes this problem, but the
fallthrough case needs to update the shared value in an incompatible
way (which is why the local variable was introduced in the first place).
To work around this, we just handle both cases in a single block of code
and update the shared variable as appropriate.

Fixes: d793ff8187 ("HID: wacom: generic: support touch on/off softkey")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Tested-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_wac.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1924,7 +1924,6 @@ static void wacom_wac_pad_event(struct h
 	struct wacom_features *features = &wacom_wac->features;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
 	int i;
-	bool is_touch_on = value;
 	bool do_report = false;
 
 	/*
@@ -1969,16 +1968,17 @@ static void wacom_wac_pad_event(struct h
 		break;
 
 	case WACOM_HID_WD_MUTE_DEVICE:
-		if (wacom_wac->shared->touch_input && value) {
-			wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
-			is_touch_on = wacom_wac->shared->is_touch_on;
-		}
-
-		/* fall through*/
 	case WACOM_HID_WD_TOUCHONOFF:
 		if (wacom_wac->shared->touch_input) {
+			bool *is_touch_on = &wacom_wac->shared->is_touch_on;
+
+			if (equivalent_usage == WACOM_HID_WD_MUTE_DEVICE && value)
+				*is_touch_on = !(*is_touch_on);
+			else if (equivalent_usage == WACOM_HID_WD_TOUCHONOFF)
+				*is_touch_on = value;
+
 			input_report_switch(wacom_wac->shared->touch_input,
-					    SW_MUTE_DEVICE, !is_touch_on);
+					    SW_MUTE_DEVICE, !(*is_touch_on));
 			input_sync(wacom_wac->shared->touch_input);
 		}
 		break;

[PATCH 4.15 18/55] power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Chan <jc@linux.com>

commit 348c7cf5fcbcb68838255759d4cb45d039af36d2 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/reset/zx-reboot.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/power/reset/zx-reboot.c
+++ b/drivers/power/reset/zx-reboot.c
@@ -82,3 +82,7 @@ static struct platform_driver zx_reboot_
 	},
 };
 module_platform_driver(zx_reboot_driver);
+
+MODULE_DESCRIPTION("ZTE SoCs reset driver");
+MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
+MODULE_LICENSE("GPL v2");

[PATCH 4.15 19/55] gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Chan <jc@linux.com>

commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-iop.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpio/gpio-iop.c
+++ b/drivers/gpio/gpio-iop.c
@@ -58,3 +58,7 @@ static int __init iop3xx_gpio_init(void)
 	return platform_driver_register(&iop3xx_gpio_driver);
 }
 arch_initcall(iop3xx_gpio_init);
+
+MODULE_DESCRIPTION("GPIO handling for Intel IOP3xx processors");
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_LICENSE("GPL");

[PATCH 4.15 20/55] gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Chan <jc@linux.com>

commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION is also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Acked-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-ath79.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -324,3 +324,6 @@ static struct platform_driver ath79_gpio
 };
 
 module_platform_driver(ath79_gpio_driver);
+
+MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+MODULE_LICENSE("GPL v2");

[PATCH 4.15 21/55] mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Chan <jc@linux.com>

commit d822401d1c6898a4a4ee03977b78b8cec402e88a upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/denali_pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -125,3 +125,7 @@ static struct pci_driver denali_pci_driv
 	.remove = denali_pci_remove,
 };
 module_pci_driver(denali_pci_driver);
+
+MODULE_DESCRIPTION("PCI driver for Denali NAND controller");
+MODULE_AUTHOR("Intel Corporation and its suppliers");
+MODULE_LICENSE("GPL v2");

[PATCH 4.15 22/55] igb: Free IRQs when device is hotplugged

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lyude Paul <lyude@redhat.com>

commit 888f22931478a05bc81ceb7295c626e1292bf0ed upstream.

Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon
hotplugging my kernel would immediately crash due to igb:

[  680.825801] kernel BUG at drivers/pci/msi.c:352!
[  680.828388] invalid opcode: 0000 [#1] SMP
[  680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb]
[  680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G           O     4.15.0-rc3Lyude-Test+ #6
[  680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017
[  680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0
[  680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286
[  680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c
[  680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178
[  680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00
[  680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298
[  680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000
[  680.836332] FS:  0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000
[  680.836817] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0
[  680.837954] Call Trace:
[  680.838853]  pci_disable_msix+0xce/0xf0
[  680.839616]  igb_reset_interrupt_capability+0x5d/0x60 [igb]
[  680.840278]  igb_remove+0x9d/0x110 [igb]
[  680.840764]  pci_device_remove+0x36/0xb0
[  680.841279]  device_release_driver_internal+0x157/0x220
[  680.841739]  pci_stop_bus_device+0x7d/0xa0
[  680.842255]  pci_stop_bus_device+0x2b/0xa0
[  680.842722]  pci_stop_bus_device+0x3d/0xa0
[  680.843189]  pci_stop_and_remove_bus_device+0xe/0x20
[  680.843627]  trim_stale_devices+0xf3/0x140
[  680.844086]  trim_stale_devices+0x94/0x140
[  680.844532]  trim_stale_devices+0xa6/0x140
[  680.845031]  ? get_slot_status+0x90/0xc0
[  680.845536]  acpiphp_check_bridge.part.5+0xfe/0x140
[  680.846021]  acpiphp_hotplug_notify+0x175/0x200
[  680.846581]  ? free_bridge+0x100/0x100
[  680.847113]  acpi_device_hotplug+0x8a/0x490
[  680.847535]  acpi_hotplug_work_fn+0x1a/0x30
[  680.848076]  process_one_work+0x182/0x3a0
[  680.848543]  worker_thread+0x2e/0x380
[  680.848963]  ? process_one_work+0x3a0/0x3a0
[  680.849373]  kthread+0x111/0x130
[  680.849776]  ? kthread_create_worker_on_cpu+0x50/0x50
[  680.850188]  ret_from_fork+0x1f/0x30
[  680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b
[  680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0

As it turns out, normally the freeing of IRQs that would fix this is called
inside of the scope of __igb_close(). However, since the device is
already gone by the point we try to unregister the netdevice from the
driver due to a hotplug we end up seeing that the netif isn't present
and thus, forget to free any of the device IRQs.

So: make sure that if we're in the process of dismantling the netdev, we
always allow __igb_close() to be called so that IRQs may be freed
normally. Additionally, only allow igb_close() to be called from
__igb_close() if it hasn't already been called for the given adapter.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach")
Cc: Todd Fujinaka <todd.fujinaka@intel.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/igb/igb_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3676,7 +3676,7 @@ static int __igb_close(struct net_device
 
 int igb_close(struct net_device *netdev)
 {
-	if (netif_device_present(netdev))
+	if (netif_device_present(netdev) || netdev->dismantle)
 		return __igb_close(netdev, false);
 	return 0;
 }

[PATCH 4.15 23/55] ima/policy: fix parsing of fsuuid

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Rapoport <rppt@linux.vnet.ibm.com>

commit 36447456e1cca853188505f2a964dbbeacfc7a7a upstream.

The switch to uuid_t invereted the logic of verfication that &entry->fsuuid
is zero during parsing of "fsuuid=" rule. Instead of making sure the
&entry->fsuuid field is not attempted to be overwritten, we bail out for
perfectly correct rule.

Fixes: 787d8c530af7 ("ima/policy: switch to use uuid_t")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_policy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -743,7 +743,7 @@ static int ima_parse_rule(char *rule, st
 		case Opt_fsuuid:
 			ima_log_string(ab, "fsuuid", args[0].from);
 
-			if (uuid_is_null(&entry->fsuuid)) {
+			if (!uuid_is_null(&entry->fsuuid)) {
 				result = -EINVAL;
 				break;
 			}

[PATCH 4.15 24/55] scsi: aacraid: Fix udev inquiry race condition

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>

commit f4e8708d3104437fd7716e957f38c265b0c509ef upstream.

When udev requests for a devices inquiry string, it might create multiple
threads causing a race condition on the shared inquiry resource string.

Created a buffer with the string for each thread.

Fixes: 3bc8070fb75b3315 ([SCSI] aacraid: SMC vendor identification)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/aacraid/aachba.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -913,8 +913,16 @@ static void setinqstr(struct aac_dev *de
 	memset(str, ' ', sizeof(*str));
 
 	if (sup_adap_info->adapter_type_text[0]) {
-		char *cp = sup_adap_info->adapter_type_text;
 		int c;
+		char *cp;
+		char *cname = kmemdup(sup_adap_info->adapter_type_text,
+				sizeof(sup_adap_info->adapter_type_text),
+								GFP_ATOMIC);
+
+		if (!cname)
+			return;
+
+		cp = cname;
 		if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
 			inqstrcpy("SMC", str->vid);
 		else {
@@ -923,7 +931,7 @@ static void setinqstr(struct aac_dev *de
 				++cp;
 			c = *cp;
 			*cp = '\0';
-			inqstrcpy(sup_adap_info->adapter_type_text, str->vid);
+			inqstrcpy(cname, str->vid);
 			*cp = c;
 			while (*cp && *cp != ' ')
 				++cp;
@@ -937,8 +945,8 @@ static void setinqstr(struct aac_dev *de
 			cp[sizeof(str->pid)] = '\0';
 		}
 		inqstrcpy (cp, str->pid);
-		if (c)
-			cp[sizeof(str->pid)] = c;
+
+		kfree(cname);
 	} else {
 		struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
 

[PATCH 4.15 25/55] scsi: aacraid: Fix hang in kdump

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>

commit c5313ae8e4e037bfaf5e56cb8d6efdb8e92ce437 upstream.

Driver attempts to perform a device scan and device add after coming out
of reset. At times when the kdump kernel loads and it tries to perform
eh recovery, the device scan hangs since its commands are blocked because
of the eh recovery. This should have shown up in normal eh recovery path
(Should have been obvious)

Remove the code that performs scanning.I can live without the rescanning
support in the stable kernels but a hanging kdump/eh recovery needs to be
fixed.

Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Reported-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Fixes: a2d0321dd532901e (scsi: aacraid: Reload offlined drives after controller reset)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/aacraid/aachba.c  |    1 -
 drivers/scsi/aacraid/commsup.c |    9 +--------
 2 files changed, 1 insertion(+), 9 deletions(-)

--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -918,7 +918,6 @@ static void setinqstr(struct aac_dev *de
 		char *cname = kmemdup(sup_adap_info->adapter_type_text,
 				sizeof(sup_adap_info->adapter_type_text),
 								GFP_ATOMIC);
-
 		if (!cname)
 			return;
 
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1643,14 +1643,7 @@ static int _aac_reset_adapter(struct aac
 out:
 	aac->in_reset = 0;
 	scsi_unblock_requests(host);
-	/*
-	 * Issue bus rescan to catch any configuration that might have
-	 * occurred
-	 */
-	if (!retval) {
-		dev_info(&aac->pdev->dev, "Issuing bus rescan\n");
-		scsi_scan_host(host);
-	}
+
 	if (jafo) {
 		spin_lock_irq(host->host_lock);
 	}

[PATCH 4.15 26/55] scsi: storvsc: missing error code in storvsc_probe()

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ca8dc694045e9aa248e9916e0f614deb0494cb3d upstream.

We should set the error code if fc_remote_port_add() fails.

Fixes: daf0cd445a21 ("scsi: storvsc: Add support for FC rport.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cathy Avery <cavery@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/storvsc_drv.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1834,8 +1834,10 @@ static int storvsc_probe(struct hv_devic
 		fc_host_node_name(host) = stor_device->node_name;
 		fc_host_port_name(host) = stor_device->port_name;
 		stor_device->rport = fc_remote_port_add(host, 0, &ids);
-		if (!stor_device->rport)
+		if (!stor_device->rport) {
+			ret = -ENOMEM;
 			goto err_out4;
+		}
 	}
 #endif
 	return 0;

[PATCH 4.15 27/55] staging: lustre: separate a connection destroy from free struct kib_conn

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Eremin <dmitry.eremin@intel.com>

commit 9b046013e5837f8a58453d1e9f8e01d03adb7fe7 upstream.

The logic of the original commit 4d99b2581eff ("staging: lustre: avoid
intensive reconnecting for ko2iblnd") was assumed conditional free of
struct kib_conn if the second argument free_conn in function
kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn) is true.
But this hunk of code was dropped from original commit. As result the logic
works wrong and current code use struct kib_conn after free.

> drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
> 3317  kiblnd_destroy_conn(conn, !peer);
>                           ^^^^ Freed always (but should be conditionally)
> 3318
> 3319  spin_lock_irqsave(lock, flags);
> 3320  if (!peer)
> 3321      continue;
> 3322
> 3323  conn->ibc_peer = peer;
>       ^^^^^^^^^^^^^^ Use after free
> 3324  if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE)
> 3325      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3326                    &kiblnd_data.kib_reconn_list);
> 3327  else
> 3328      list_add_tail(&conn->ibc_list,
>                          ^^^^^^^^^^^^^^ Use after free
> 3329                    &kiblnd_data.kib_reconn_wait);

To avoid confusion this fix moved the freeing a struct kib_conn outside of
the function kiblnd_destroy_conn() and free as it was intended in original
commit.

Fixes: 4d99b2581eff ("staging: lustre: avoid intensive reconnecting for ko2iblnd")
Signed-off-by: Dmitry Eremin <Dmitry.Eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c    |    7 +++----
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h    |    2 +-
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c |    6 ++++--
 3 files changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c
+++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c
@@ -826,14 +826,15 @@ struct kib_conn *kiblnd_create_conn(stru
 	return conn;
 
  failed_2:
-	kiblnd_destroy_conn(conn, true);
+	kiblnd_destroy_conn(conn);
+	LIBCFS_FREE(conn, sizeof(*conn));
  failed_1:
 	LIBCFS_FREE(init_qp_attr, sizeof(*init_qp_attr));
  failed_0:
 	return NULL;
 }
 
-void kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn)
+void kiblnd_destroy_conn(struct kib_conn *conn)
 {
 	struct rdma_cm_id *cmid = conn->ibc_cmid;
 	struct kib_peer *peer = conn->ibc_peer;
@@ -896,8 +897,6 @@ void kiblnd_destroy_conn(struct kib_conn
 		rdma_destroy_id(cmid);
 		atomic_dec(&net->ibn_nconns);
 	}
-
-	LIBCFS_FREE(conn, sizeof(*conn));
 }
 
 int kiblnd_close_peer_conns_locked(struct kib_peer *peer, int why)
--- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h
+++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h
@@ -1016,7 +1016,7 @@ int  kiblnd_close_peer_conns_locked(stru
 struct kib_conn *kiblnd_create_conn(struct kib_peer *peer,
 				    struct rdma_cm_id *cmid,
 				    int state, int version);
-void kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn);
+void kiblnd_destroy_conn(struct kib_conn *conn);
 void kiblnd_close_conn(struct kib_conn *conn, int error);
 void kiblnd_close_conn_locked(struct kib_conn *conn, int error);
 
--- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
+++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
@@ -3314,11 +3314,13 @@ kiblnd_connd(void *arg)
 			spin_unlock_irqrestore(lock, flags);
 			dropped_lock = 1;
 
-			kiblnd_destroy_conn(conn, !peer);
+			kiblnd_destroy_conn(conn);
 
 			spin_lock_irqsave(lock, flags);
-			if (!peer)
+			if (!peer) {
+				kfree(conn);
 				continue;
+			}
 
 			conn->ibc_peer = peer;
 			if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE)

[PATCH 4.15 28/55] staging: ccree: NULLify backup_info when unused

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gilad Ben-Yossef <gilad@benyossef.com>

commit 46df8824982e4fb0198776078d4a8c3e2d531464 upstream.

backup_info field is only allocated for decrypt code path.
The field was not nullified when not used causing a kfree
in an error handling path to attempt to free random
addresses as uncovered in stress testing.

Fixes: 737aed947f9b ("staging: ccree: save ciphertext for CTS IV")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ccree/ssi_cipher.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/ccree/ssi_cipher.c
+++ b/drivers/staging/ccree/ssi_cipher.c
@@ -908,6 +908,7 @@ static int ssi_ablkcipher_decrypt(struct
 	scatterwalk_map_and_copy(req_ctx->backup_info, req->src,
 				 (req->nbytes - ivsize), ivsize, 0);
 	req_ctx->is_giv = false;
+	req_ctx->backup_info = NULL;
 
 	return ssi_blkcipher_process(tfm, req_ctx, req->dst, req->src, req->nbytes, req->info, ivsize, (void *)req, DRV_CRYPTO_DIRECTION_DECRYPT);
 }

[PATCH 4.15 29/55] staging: ccree: fix fips event irq handling build

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gilad Ben-Yossef <gilad@benyossef.com>

commit dc5591dc9c03e4cd22d3f0c3659196cc34668452 upstream.

When moving from internal for kernel FIPS infrastructure the FIPS event irq
handling code was left with the old ifdef by mistake. Fix it.

Fixes: b7e607bf33a2 ("staging: ccree: move FIPS support to kernel infrastructure")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ccree/ssi_driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/ccree/ssi_driver.c
+++ b/drivers/staging/ccree/ssi_driver.c
@@ -117,7 +117,7 @@ static irqreturn_t cc_isr(int irq, void
 		irr &= ~SSI_COMP_IRQ_MASK;
 		complete_request(drvdata);
 	}
-#ifdef CC_SUPPORT_FIPS
+#ifdef CONFIG_CRYPTO_FIPS
 	/* TEE FIPS interrupt */
 	if (likely((irr & SSI_GPR0_IRQ_MASK) != 0)) {
 		/* Mask interrupt - will be unmasked in Deferred service handler */

[PATCH 4.15 30/55] tty: fix data race between tty_init_dev and flush of buf

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gaurav Kohli <gkohli@codeaurora.org>

commit b027e2298bd588d6fa36ed2eda97447fb3eac078 upstream.

There can be a race, if receive_buf call comes before
tty initialization completes in n_tty_open and tty->disc_data
may be NULL.

CPU0					CPU1
----					----
 000|n_tty_receive_buf_common()   	n_tty_open()
-001|n_tty_receive_buf2()		tty_ldisc_open.isra.3()
-002|tty_ldisc_receive_buf(inline)	tty_ldisc_setup()

Using ldisc semaphore lock in tty_init_dev till disc_data
initializes completely.

Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/tty_io.c    |    8 +++++++-
 drivers/tty/tty_ldisc.c |    4 ++--
 include/linux/tty.h     |    2 ++
 3 files changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1323,6 +1323,9 @@ struct tty_struct *tty_init_dev(struct t
 			"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
 			__func__, tty->driver->name);
 
+	retval = tty_ldisc_lock(tty, 5 * HZ);
+	if (retval)
+		goto err_release_lock;
 	tty->port->itty = tty;
 
 	/*
@@ -1333,6 +1336,7 @@ struct tty_struct *tty_init_dev(struct t
 	retval = tty_ldisc_setup(tty, tty->link);
 	if (retval)
 		goto err_release_tty;
+	tty_ldisc_unlock(tty);
 	/* Return the tty locked so that it cannot vanish under the caller */
 	return tty;
 
@@ -1345,9 +1349,11 @@ err_module_put:
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
-	tty_unlock(tty);
+	tty_ldisc_unlock(tty);
 	tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
 			     retval, idx);
+err_release_lock:
+	tty_unlock(tty);
 	release_tty(tty, idx);
 	return ERR_PTR(retval);
 }
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -337,7 +337,7 @@ static inline void __tty_ldisc_unlock(st
 	ldsem_up_write(&tty->ldisc_sem);
 }
 
-static int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
+int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
 {
 	int ret;
 
@@ -348,7 +348,7 @@ static int tty_ldisc_lock(struct tty_str
 	return 0;
 }
 
-static void tty_ldisc_unlock(struct tty_struct *tty)
+void tty_ldisc_unlock(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC_HALTED, &tty->flags);
 	__tty_ldisc_unlock(tty);
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -405,6 +405,8 @@ extern const char *tty_name(const struct
 extern struct tty_struct *tty_kopen(dev_t device);
 extern void tty_kclose(struct tty_struct *tty);
 extern int tty_dev_name_to_number(const char *name, dev_t *number);
+extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout);
+extern void tty_ldisc_unlock(struct tty_struct *tty);
 #else
 static inline void tty_kref_put(struct tty_struct *tty)
 { }

[PATCH 4.15 31/55] usb: option: Add support for FS040U modem

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: OKAMOTO Yoshiaki <yokamoto@allied-telesis.co.jp>

commit 69341bd15018da0a662847e210f9b2380c71e623 upstream.

FS040U modem is manufactured by omega, and sold by Fujisoft. This patch
adds ID of the modem to use option1 driver. Interface 3 is used as
qmi_wwan, so the interface is ignored.

Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -380,6 +380,9 @@ static void option_instat_callback(struc
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 #define FOUR_G_SYSTEMS_PRODUCT_W100		0x9b01
 
+/* Fujisoft products */
+#define FUJISOFT_PRODUCT_FS040U			0x9b02
+
 /* iBall 3.5G connect wireless modem */
 #define IBALL_3_5G_CONNECT			0x9605
 
@@ -1894,6 +1897,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
 	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
 	},
+	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
+	 .driver_info = (kernel_ulong_t)&net_intf3_blacklist},
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },

[PATCH 4.15 33/55] USB: cdc-acm: Do not log urb submission errors on disconnect

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream.

When disconnected sometimes the cdc-acm driver logs errors like these:

[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19

Silence these by not logging errors when the result is -ENODEV.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -425,7 +425,7 @@ static int acm_submit_read_urb(struct ac
 
 	res = usb_submit_urb(acm->read_urbs[index], mem_flags);
 	if (res) {
-		if (res != -EPERM) {
+		if (res != -EPERM && res != -ENODEV) {
 			dev_err(&acm->data->dev,
 				"urb %d failed submission with %d\n",
 				index, res);

[PATCH 4.15 34/55] CDC-ACM: apply quirk for card reader

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream.

This devices drops random bytes from messages if you talk to it
too fast.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1752,6 +1752,9 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
+	.driver_info = SINGLE_RX_URB,
+	},
 	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},

[PATCH 4.15 35/55] USB: serial: io_edgeport: fix possible sleep-in-atomic

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai <baijiaju1990@gmail.com>

commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream.

According to drivers/usb/serial/io_edgeport.c, the driver may sleep
under a spinlock.
The function call path is:
edge_bulk_in_callback (acquire the spinlock)
   process_rcvd_data
     process_rcvd_status
       change_port_settings
         send_iosp_ext_cmd
           write_cmd_usb
             usb_kill_urb --> may sleep

To fix it, the redundant usb_kill_urb() is removed from the error path
after usb_submit_urb() fails.

This possible bug is found by my static analysis tool (DSAC) and checked
by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_edgeport.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2282,7 +2282,6 @@ static int write_cmd_usb(struct edgeport
 		/* something went wrong */
 		dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
 			__func__, status);
-		usb_kill_urb(urb);
 		usb_free_urb(urb);
 		atomic_dec(&CmdUrbs);
 		return status;

[PATCH 4.15 36/55] usbip: prevent bind loops on devices attached to vhci_hcd

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan <shuahkh@osg.samsung.com>

commit ef54cf0c600fb8f5737fb001a9e357edda1a1de8 upstream.

usbip host binds to devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Unbind followed by bind works, however device is left in a bad state with
accesses via the attached busid result in errors and system hangs during
shutdown.

Fix it to check and bail out if the device is already attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/usb/usbip/src/usbip_bind.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/tools/usb/usbip/src/usbip_bind.c
+++ b/tools/usb/usbip/src/usbip_bind.c
@@ -144,6 +144,7 @@ static int bind_device(char *busid)
 	int rc;
 	struct udev *udev;
 	struct udev_device *dev;
+	const char *devpath;
 
 	/* Check whether the device with this bus ID exists. */
 	udev = udev_new();
@@ -152,8 +153,16 @@ static int bind_device(char *busid)
 		err("device with the specified bus ID does not exist");
 		return -1;
 	}
+	devpath = udev_device_get_devpath(dev);
 	udev_unref(udev);
 
+	/* If the device is already attached to vhci_hcd - bail out */
+	if (strstr(devpath, USBIP_VHCI_DRV_NAME)) {
+		err("bind loop detected: device: %s is attached to %s\n",
+		    devpath, USBIP_VHCI_DRV_NAME);
+		return -1;
+	}
+
 	rc = unbind_other(busid);
 	if (rc == UNBIND_ST_FAILED) {
 		err("could not unbind driver from device on busid %s", busid);

[PATCH 4.15 37/55] usbip: list: dont list devices attached to vhci_hcd

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan <shuahkh@osg.samsung.com>

commit ef824501f50846589f02173d73ce3fe6021a9d2a upstream.

usbip host lists devices attached to vhci_hcd on the same server
when user does attach over localhost or specifies the server as the
remote.

usbip attach -r localhost -b busid
or
usbip attach -r servername (or server IP)

Fix it to check and not list devices that are attached to vhci_hcd.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/usb/usbip/src/usbip_list.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/tools/usb/usbip/src/usbip_list.c
+++ b/tools/usb/usbip/src/usbip_list.c
@@ -187,6 +187,7 @@ static int list_devices(bool parsable)
 	const char *busid;
 	char product_name[128];
 	int ret = -1;
+	const char *devpath;
 
 	/* Create libudev context. */
 	udev = udev_new();
@@ -209,6 +210,14 @@ static int list_devices(bool parsable)
 		path = udev_list_entry_get_name(dev_list_entry);
 		dev = udev_device_new_from_syspath(udev, path);
 
+		/* Ignore devices attached to vhci_hcd */
+		devpath = udev_device_get_devpath(dev);
+		if (strstr(devpath, USBIP_VHCI_DRV_NAME)) {
+			dbg("Skip the device %s already attached to %s\n",
+			    devpath, USBIP_VHCI_DRV_NAME);
+			continue;
+		}
+
 		/* Get device information. */
 		idVendor = udev_device_get_sysattr_value(dev, "idVendor");
 		idProduct = udev_device_get_sysattr_value(dev, "idProduct");

[PATCH 4.15 38/55] USB: serial: simple: add Motorola Tetra driver

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream.

Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
devices.

D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9011 Rev=24.16
S:  Manufacturer=Motorola Solutions Inc.
S:  Product=Motorola Solutions TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Note that these devices do not support the CDC SET_CONTROL_LINE_STATE
request (for any interface).

Reported-by: Max Schulze <max.schulze@posteo.de>
Tested-by: Max Schulze <max.schulze@posteo.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/Kconfig             |    1 +
 drivers/usb/serial/usb-serial-simple.c |    7 +++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -63,6 +63,7 @@ config USB_SERIAL_SIMPLE
 		- Google USB serial devices
 		- HP4x calculators
 		- a number of Motorola phones
+		- Motorola Tetra devices
 		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -77,6 +77,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
 DEVICE(moto_modem, MOTO_IDS);
 
+/* Motorola Tetra driver */
+#define MOTOROLA_TETRA_IDS()			\
+	{ USB_DEVICE(0x0cad, 0x9011) }	/* Motorola Solutions TETRA PEI */
+DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
+
 /* Novatel Wireless GPS driver */
 #define NOVATEL_IDS()			\
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
@@ -107,6 +112,7 @@ static struct usb_serial_driver * const
 	&google_device,
 	&vivopay_device,
 	&moto_modem_device,
+	&motorola_tetra_device,
 	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
@@ -122,6 +128,7 @@ static const struct usb_device_id id_tab
 	GOOGLE_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
+	MOTOROLA_TETRA_IDS(),
 	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),

[PATCH 4.15 39/55] usb: f_fs: Prevent gadget unbind if it is already unbound

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hemant Kumar <hemantk@codeaurora.org>

commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream.

Upon usb composition switch there is possibility of ep0 file
release happening after gadget driver bind. In case of composition
switch from adb to a non-adb composition gadget will never gets
bound again resulting into failure of usb device enumeration. Fix
this issue by checking FFS_FL_BOUND flag and avoid extra
gadget driver unbind if it is already done as part of composition
switch.

This fixes adb reconnection error reported on Android running
v4.4 and above kernel versions. Verified on Hikey running vanilla
v4.15-rc7 + few out of tree Mali patches.

Reviewed-at: https://android-review.googlesource.com/#/c/582632/

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Badhri <badhri@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
[AmitP: Cherry-picked it from android-4.14 and updated the commit log]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3700,7 +3700,8 @@ static void ffs_closed(struct ffs_data *
 	ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
 	ffs_dev_unlock();
 
-	unregister_gadget_item(ci);
+	if (test_bit(FFS_FL_BOUND, &ffs->flags))
+		unregister_gadget_item(ci);
 	return;
 done:
 	ffs_dev_unlock();

[PATCH 4.15 40/55] usb: uas: unconditionally bring back host after reset

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream.

Quoting Hans:

If we return 1 from our post_reset handler, then our disconnect handler
will be called immediately afterwards. Since pre_reset blocks all scsi
requests our disconnect handler will then hang in the scsi_remove_host
call.

This is esp. bad because our disconnect handler hanging for ever also
stops the USB subsys from enumerating any new USB devices, causes commands
like lsusb to hang, etc.

In practice this happens when unplugging some uas devices because the hub
code may see the device as needing a warm-reset and calls usb_reset_device
before seeing the disconnect. In this case uas_configure_endpoints fails
with -ENODEV. We do not want to print an error for this, so this commit
also silences the shost_printk for -ENODEV.

ENDQUOTE

However, if we do that we better drop any unconditional execution
and report to the SCSI subsystem that we have undergone a reset
but we are not operational now.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/uas.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -1076,20 +1076,19 @@ static int uas_post_reset(struct usb_int
 		return 0;
 
 	err = uas_configure_endpoints(devinfo);
-	if (err) {
+	if (err && err != ENODEV)
 		shost_printk(KERN_ERR, shost,
 			     "%s: alloc streams error %d after reset",
 			     __func__, err);
-		return 1;
-	}
 
+	/* we must unblock the host in every case lest we deadlock */
 	spin_lock_irqsave(shost->host_lock, flags);
 	scsi_report_bus_reset(shost, 0);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	scsi_unblock_requests(shost);
 
-	return 0;
+	return err ? 1 : 0;
 }
 
 static int uas_suspend(struct usb_interface *intf, pm_message_t message)

[PATCH 4.15 41/55] usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit 11fb37998759c48e4e4c200c974593cbeab25d3e upstream.

The current code tries to test for bits that are masked out by
usb_endpoint_maxp(). Instead, use the proper accessor to access
the new high bandwidth bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -912,7 +912,7 @@ int usb_gadget_ep_match_desc(struct usb_
 		return 0;
 
 	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1)
 		return 0;
 
 	switch (type) {

[PATCH 4.15 42/55] ANDROID: binder: remove waitqueue when thread exits.

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martijn Coenen <maco@android.com>

commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.

binder_poll() passes the thread->wait waitqueue that
can be slept on for work. When a thread that uses
epoll explicitly exits using BINDER_THREAD_EXIT,
the waitqueue is freed, but it is never removed
from the corresponding epoll data structure. When
the process subsequently exits, the epoll cleanup
code tries to access the waitlist, which results in
a use-after-free.

Prevent this by using POLLFREE when the thread exits.

Signed-off-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/android/binder.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -4302,6 +4302,18 @@ static int binder_thread_release(struct
 		if (t)
 			spin_lock(&t->lock);
 	}
+
+	/*
+	 * If this thread used poll, make sure we remove the waitqueue
+	 * from any epoll data structures holding it with POLLFREE.
+	 * waitqueue_active() is safe to use here because we're holding
+	 * the inner lock.
+	 */
+	if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
+	    waitqueue_active(&thread->wait)) {
+		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
+	}
+
 	binder_inner_proc_unlock(thread->proc);
 
 	if (send_reply)

[PATCH 4.15 43/55] android: binder: use VM_ALLOC to get vm area

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ganesh Mahendran <opensource.ganesh@gmail.com>

commit aac6830ec1cb681544212838911cdc57f2638216 upstream.

VM_IOREMAP is used to access hardware through a mechanism called
I/O mapped memory. Android binder is a IPC machanism which will
not access I/O memory.

And VM_IOREMAP has alignment requiement which may not needed in
binder.
    __get_vm_area_node()
    {
    ...
        if (flags & VM_IOREMAP)
            align = 1ul << clamp_t(int, fls_long(size),
               PAGE_SHIFT, IOREMAP_MAX_ORDER);
    ...
    }

This patch will save some kernel vm area, especially for 32bit os.

In 32bit OS, kernel vm area is only 240MB. We may got below
error when launching a app:

<3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12
<3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12

Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Martijn Coenen <maco@android.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/android/binder_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -666,7 +666,7 @@ int binder_alloc_mmap_handler(struct bin
 		goto err_already_mapped;
 	}
 
-	area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
+	area = get_vm_area(vma->vm_end - vma->vm_start, VM_ALLOC);
 	if (area == NULL) {
 		ret = -ENOMEM;
 		failure_string = "get_vm_area";

[PATCH 4.15 44/55] mei: me: allow runtime pm for platform with D0i3

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Winkler <tomas.winkler@intel.com>

commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream.

>>From the pci power documentation:
"The driver itself should not call pm_runtime_allow(), though. Instead,
it should let user space or some platform-specific code do that (user space
can do it via sysfs as stated above)..."

However, the S0ix residency cannot be reached without MEI device getting
into low power state. Hence, for mei devices that support D0i3, it's better
to make runtime power management mandatory and not rely on the system
integration such as udev rules.
This policy cannot be applied globally as some older platforms
were found to have broken power management.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/mei/pci-me.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -238,8 +238,11 @@ static int mei_me_probe(struct pci_dev *
 	 */
 	mei_me_set_pm_domain(dev);
 
-	if (mei_pg_is_enabled(dev))
+	if (mei_pg_is_enabled(dev)) {
 		pm_runtime_put_noidle(&pdev->dev);
+		if (hw->d0i3_supported)
+			pm_runtime_allow(&pdev->dev);
+	}
 
 	dev_dbg(&pdev->dev, "initialization successful.\n");
 

[PATCH 4.15 45/55] serial: 8250_of: fix return code when probe function fails to get reset

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <yamada.masahiro@socionext.com>

commit b9820a31691b771db37afe2054dd3d3a680c1eed upstream.

The error pointer from devm_reset_control_get_optional_shared() is
not propagated.

One of the most common problem scenarios is it returns -EPROBE_DEFER
when the reset controller has not probed yet.  In this case, the
probe of the reset consumer should be deferred.

Fixes: e2860e1f62f2 ("serial: 8250_of: Add reset support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_of.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -136,8 +136,11 @@ static int of_platform_serial_setup(stru
 	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
-	if (IS_ERR(info->rst))
+	if (IS_ERR(info->rst)) {
+		ret = PTR_ERR(info->rst);
 		goto err_dispose;
+	}
+
 	ret = reset_control_deassert(info->rst);
 	if (ret)
 		goto err_dispose;

[PATCH 4.15 46/55] serial: 8250_uniphier: fix error return code in uniphier_uart_probe()

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 7defa77d2baca4d6eb85234f10f38ab618332e75 upstream.

Fix to return a negative error code from the port register error
handling case instead of 0, as done elsewhere in this function.

Fixes: 39be40ce066d ("serial: 8250_uniphier: fix serial port index in private data")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_uniphier.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -250,12 +250,13 @@ static int uniphier_uart_probe(struct pl
 	up.dl_read = uniphier_serial_dl_read;
 	up.dl_write = uniphier_serial_dl_write;
 
-	priv->line = serial8250_register_8250_port(&up);
-	if (priv->line < 0) {
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
 		clk_disable_unprepare(priv->clk);
 		return ret;
 	}
+	priv->line = ret;
 
 	platform_set_drvdata(pdev, priv);
 

[PATCH 4.15 47/55] serial: 8250_dw: Revert "Improve clock rate setting"

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit c14b65feac9ebed649d6fe79c6b6d64d21d0287d upstream.

The commit

  de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting")

obviously tries to cure symptoms, and not a root cause.

The root cause is the non-flexible rate calculation inside the
corresponding clock driver. What we need is to provide maximum UART
divisor value to the clock driver to allow it do the job transparently
to the caller.

Since from the initial commit message I have got no clue which clock
driver actually needs to be amended, I leave this exercise to the people
who know better the case.

Moreover, it seems [1] the fix introduced a regression. And possible
even one more [2].

Taking above, revert the commit de9e33bdfa22 for now.

[1]: https://www.spinics.net/lists/linux-serial/msg28872.html
[2]: https://github.com/Dunedan/mbp-2016-linux/issues/29#issuecomment-357583782

Fixes: de9e33bdfa22 ("serial: 8250_dw: Improve clock rate setting")
Cc: Ed Blake <ed.blake@sondrel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |   30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -252,31 +252,25 @@ static void dw8250_set_termios(struct ua
 			       struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned int target_rate, min_rate, max_rate;
 	struct dw8250_data *d = p->private_data;
 	long rate;
-	int i, ret;
+	int ret;
 
 	if (IS_ERR(d->clk) || !old)
 		goto out;
 
-	/* Find a clk rate within +/-1.6% of an integer multiple of baudx16 */
-	target_rate = baud * 16;
-	min_rate = target_rate - (target_rate >> 6);
-	max_rate = target_rate + (target_rate >> 6);
-
-	for (i = 1; i <= UART_DIV_MAX; i++) {
-		rate = clk_round_rate(d->clk, i * target_rate);
-		if (rate >= i * min_rate && rate <= i * max_rate)
-			break;
-	}
-	if (i <= UART_DIV_MAX) {
-		clk_disable_unprepare(d->clk);
+	clk_disable_unprepare(d->clk);
+	rate = clk_round_rate(d->clk, baud * 16);
+	if (rate < 0)
+		ret = rate;
+	else if (rate == 0)
+		ret = -ENOENT;
+	else
 		ret = clk_set_rate(d->clk, rate);
-		clk_prepare_enable(d->clk);
-		if (!ret)
-			p->uartclk = rate;
-	}
+	clk_prepare_enable(d->clk);
+
+	if (!ret)
+		p->uartclk = rate;
 
 out:
 	p->status &= ~UPSTAT_AUTOCTS;

[PATCH 4.15 48/55] serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@nxp.com>

commit 38b1f0fb42f772b8c9aac53593883a18ff5eb9d7 upstream.

The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS
lines, so only allow such wakeup method when the system actually has
RTS/CTS support.

Fixes: bc85734b126f ("serial: imx: allow waking up on RTSD")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/imx.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2238,12 +2238,14 @@ static void serial_imx_enable_wakeup(str
 		val &= ~UCR3_AWAKEN;
 	writel(val, sport->port.membase + UCR3);
 
-	val = readl(sport->port.membase + UCR1);
-	if (on)
-		val |= UCR1_RTSDEN;
-	else
-		val &= ~UCR1_RTSDEN;
-	writel(val, sport->port.membase + UCR1);
+	if (sport->have_rtscts) {
+		val = readl(sport->port.membase + UCR1);
+		if (on)
+			val |= UCR1_RTSDEN;
+		else
+			val &= ~UCR1_RTSDEN;
+		writel(val, sport->port.membase + UCR1);
+	}
 }
 
 static int imx_serial_port_suspend_noirq(struct device *dev)

[PATCH 4.15 49/55] spi: imx: do not access registers while clocks disabled

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Agner <stefan@agner.ch>

commit d593574aff0ab846136190b1729c151c736727ec upstream.

Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.

Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-imx.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1668,12 +1668,23 @@ static int spi_imx_remove(struct platfor
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	int ret;
 
 	spi_bitbang_stop(&spi_imx->bitbang);
 
+	ret = clk_enable(spi_imx->clk_per);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(spi_imx->clk_ipg);
+	if (ret) {
+		clk_disable(spi_imx->clk_per);
+		return ret;
+	}
+
 	writel(0, spi_imx->base + MXC_CSPICTRL);
-	clk_unprepare(spi_imx->clk_ipg);
-	clk_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
+	clk_disable_unprepare(spi_imx->clk_per);
 	spi_imx_sdma_exit(spi_imx);
 	spi_master_put(master);
 

[PATCH 4.15 50/55] iio: adc: stm32: fix scan of multiple channels with DMA

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabrice Gasnier <fabrice.gasnier@st.com>

commit 04e491ca9df60ffe8637d00d68e5ab8bc73b30d5 upstream.

By default, watermark is set to '1'. Watermark is used to fine tune
cyclic dma buffer period. In case watermark is left untouched (e.g. 1)
and several channels are being scanned, buffer period is wrongly set
(e.g. to 1 sample). As a consequence, data is never pushed to upper layer.
Fix buffer period size, by taking scan channels number into account.

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/stm32-adc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1315,6 +1315,7 @@ static int stm32_adc_set_watermark(struc
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	unsigned int watermark = STM32_DMA_BUFFER_SIZE / 2;
+	unsigned int rx_buf_sz = STM32_DMA_BUFFER_SIZE;
 
 	/*
 	 * dma cyclic transfers are used, buffer is split into two periods.
@@ -1323,7 +1324,7 @@ static int stm32_adc_set_watermark(struc
 	 * - one buffer (period) driver can push with iio_trigger_poll().
 	 */
 	watermark = min(watermark, val * (unsigned)(sizeof(u16)));
-	adc->rx_buf_sz = watermark * 2;
+	adc->rx_buf_sz = min(rx_buf_sz, watermark * 2 * adc->num_conv);
 
 	return 0;
 }

[PATCH 4.15 51/55] iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>

commit 8f114acd4e1a9cfa05b70bcc4219bc88197b5c9b upstream.

in_concentration_raw should report, according to sysfs-bus-iio documentation,
a "Raw (unscaled no offset etc.) percentage reading of a substance."

Modify scale to convert from ppm/ppb to percentage:
1 ppm = 0.0001%
1 ppb = 0.0000001%

There is no offset needed to convert the ppm/ppb to percentage,
so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel.

Cc'd stable to reduce chance of userspace breakage in the long
run as we fix this wrong bit of ABI usage.

Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/chemical/ccs811.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

--- a/drivers/iio/chemical/ccs811.c
+++ b/drivers/iio/chemical/ccs811.c
@@ -96,7 +96,6 @@ static const struct iio_chan_spec ccs811
 		.channel2 = IIO_MOD_CO2,
 		.modified = 1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-				      BIT(IIO_CHAN_INFO_OFFSET) |
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.scan_index = 0,
 		.scan_type = {
@@ -255,24 +254,18 @@ static int ccs811_read_raw(struct iio_de
 			switch (chan->channel2) {
 			case IIO_MOD_CO2:
 				*val = 0;
-				*val2 = 12834;
+				*val2 = 100;
 				return IIO_VAL_INT_PLUS_MICRO;
 			case IIO_MOD_VOC:
 				*val = 0;
-				*val2 = 84246;
-				return IIO_VAL_INT_PLUS_MICRO;
+				*val2 = 100;
+				return IIO_VAL_INT_PLUS_NANO;
 			default:
 				return -EINVAL;
 			}
 		default:
 			return -EINVAL;
 		}
-	case IIO_CHAN_INFO_OFFSET:
-		if (!(chan->type == IIO_CONCENTRATION &&
-		      chan->channel2 == IIO_MOD_CO2))
-			return -EINVAL;
-		*val = -400;
-		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}

[PATCH 4.15 52/55] test_firmware: fix missing unlock on error in config_num_requests_store()

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <weiyongjun1@huawei.com>

commit a5e1923356505e46476c2fb518559b7a4d9d25b1 upstream.

Add the missing unlock before return from function
config_num_requests_store() in the error handling case.

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/test_firmware.c |    1 +
 1 file changed, 1 insertion(+)

--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -371,6 +371,7 @@ static ssize_t config_num_requests_store
 	if (test_fw_config->reqs) {
 		pr_err("Must call release_all_firmware prior to changing config\n");
 		rc = -EINVAL;
+		mutex_unlock(&test_fw_mutex);
 		goto out;
 	}
 	mutex_unlock(&test_fw_mutex);

[PATCH 4.15 53/55] Input: synaptics-rmi4 - unmask F03 interrupts when port is opened

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 6abe534f0776d2437c8302f58d8eb5abd483e926 upstream.

Currently we register the pass-through serio port when we probe the F03 RMI
function, and then, in sensor configure phase, we unmask interrupts.
Unfortunately this is too late, as other drivers are free probe devices
attached to the serio port as soon as it is probed. Because interrupts are
masked, the IO times out, which may result in not being able to detect
trackpoints on the pass-through port.

To fix the issue we implement open() and close() methods for the
pass-through serio port and unmask interrupts from there. We also move
creation of the pass-through port form probe to configure stage, as RMI
driver does not enable transport interrupt until all functions are probed
(we should change this, but this is a separate topic).

We also try to clear the pending data before unmasking interrupts, because
some devices like to spam the system with multiple 0xaa 0x00 announcements,
which may interfere with us trying to query ID of the device.

Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/rmi4/rmi_f03.c |   64 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 10 deletions(-)

--- a/drivers/input/rmi4/rmi_f03.c
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -32,6 +32,7 @@ struct f03_data {
 	struct rmi_function *fn;
 
 	struct serio *serio;
+	bool serio_registered;
 
 	unsigned int overwrite_buttons;
 
@@ -138,6 +139,37 @@ static int rmi_f03_initialize(struct f03
 	return 0;
 }
 
+static int rmi_f03_pt_open(struct serio *serio)
+{
+	struct f03_data *f03 = serio->port_data;
+	struct rmi_function *fn = f03->fn;
+	const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
+	const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET;
+	u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
+	int error;
+
+	/*
+	 * Consume any pending data. Some devices like to spam with
+	 * 0xaa 0x00 announcements which may confuse us as we try to
+	 * probe the device.
+	 */
+	error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len);
+	if (!error)
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+			"%s: Consumed %*ph (%d) from PS2 guest\n",
+			__func__, ob_len, obs, ob_len);
+
+	return fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+}
+
+static void rmi_f03_pt_close(struct serio *serio)
+{
+	struct f03_data *f03 = serio->port_data;
+	struct rmi_function *fn = f03->fn;
+
+	fn->rmi_dev->driver->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
+}
+
 static int rmi_f03_register_pt(struct f03_data *f03)
 {
 	struct serio *serio;
@@ -148,6 +180,8 @@ static int rmi_f03_register_pt(struct f0
 
 	serio->id.type = SERIO_PS_PSTHRU;
 	serio->write = rmi_f03_pt_write;
+	serio->open = rmi_f03_pt_open;
+	serio->close = rmi_f03_pt_close;
 	serio->port_data = f03;
 
 	strlcpy(serio->name, "Synaptics RMI4 PS/2 pass-through",
@@ -184,17 +218,27 @@ static int rmi_f03_probe(struct rmi_func
 			 f03->device_count);
 
 	dev_set_drvdata(dev, f03);
-
-	error = rmi_f03_register_pt(f03);
-	if (error)
-		return error;
-
 	return 0;
 }
 
 static int rmi_f03_config(struct rmi_function *fn)
 {
-	fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+	int error;
+
+	if (!f03->serio_registered) {
+		error = rmi_f03_register_pt(f03);
+		if (error)
+			return error;
+
+		f03->serio_registered = true;
+	} else {
+		/*
+		 * We must be re-configuring the sensor, just enable
+		 * interrupts for this function.
+		 */
+		fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+	}
 
 	return 0;
 }
@@ -204,7 +248,7 @@ static int rmi_f03_attention(struct rmi_
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
-	u16 data_addr = fn->fd.data_base_addr;
+	const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET;
 	const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
 	u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
 	u8 ob_status;
@@ -226,8 +270,7 @@ static int rmi_f03_attention(struct rmi_
 		drvdata->attn_data.size -= ob_len;
 	} else {
 		/* Grab all of the data registers, and check them for data */
-		error = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
-				       &obs, ob_len);
+		error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len);
 		if (error) {
 			dev_err(&fn->dev,
 				"%s: Failed to read F03 output buffers: %d\n",
@@ -266,7 +309,8 @@ static void rmi_f03_remove(struct rmi_fu
 {
 	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
 
-	serio_unregister_port(f03->serio);
+	if (f03->serio_registered)
+		serio_unregister_port(f03->serio);
 }
 
 struct rmi_function_handler rmi_f03_handler = {

[PATCH 4.15 54/55] Input: synaptics-rmi4 - do not delete interrupt memory too early

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit a1ab69021a584d952e6548a44b93760547b1b6b5 upstream.

We want to free memory reserved for interrupt mask handling only after we
free functions, as function drivers might want to mask interrupts. This is
needed for the followup patch to the F03 that would implement unmasking and
masking interrupts from the serio pass-through port open() and close()
methods.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/rmi4/rmi_driver.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -41,6 +41,13 @@ void rmi_free_function_list(struct rmi_d
 
 	rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
 
+	/* Doing it in the reverse order so F01 will be removed last */
+	list_for_each_entry_safe_reverse(fn, tmp,
+					 &data->function_list, node) {
+		list_del(&fn->node);
+		rmi_unregister_function(fn);
+	}
+
 	devm_kfree(&rmi_dev->dev, data->irq_memory);
 	data->irq_memory = NULL;
 	data->irq_status = NULL;
@@ -50,13 +57,6 @@ void rmi_free_function_list(struct rmi_d
 
 	data->f01_container = NULL;
 	data->f34_container = NULL;
-
-	/* Doing it in the reverse order so F01 will be removed last */
-	list_for_each_entry_safe_reverse(fn, tmp,
-					 &data->function_list, node) {
-		list_del(&fn->node);
-		rmi_unregister_function(fn);
-	}
 }
 
 static int reset_one_function(struct rmi_function *fn)

[PATCH 4.15 55/55] x86/efi: Clarify that reset attack mitigation needs appropriate userspace

[Greg Kroah-Hartman]

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <mjg59@google.com>

commit a5c03c31af2291f13689d11760c0b59fb70c9a5a upstream.

Some distributions have turned on the reset attack mitigation feature,
which is designed to force the platform to clear the contents of RAM if
the machine is shut down uncleanly. However, in order for the platform
to be able to determine whether the shutdown was clean or not, userspace
has to be configured to clear the MemoryOverwriteRequest flag on
shutdown - otherwise the firmware will end up clearing RAM on every
reboot, which is unnecessarily time consuming. Add some additional
clarity to the kconfig text to reduce the risk of systems being
configured this way.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/efi/Kconfig |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -159,7 +159,10 @@ config RESET_ATTACK_MITIGATION
 	  using the TCG Platform Reset Attack Mitigation specification. This
 	  protects against an attacker forcibly rebooting the system while it
 	  still contains secrets in RAM, booting another OS and extracting the
-	  secrets.
+	  secrets. This should only be enabled when userland is configured to
+	  clear the MemoryOverwriteRequest flag on clean shutdown after secrets
+	  have been evicted, since otherwise it will trigger even on clean
+	  reboots.
 
 endmenu
 

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Shuah Khan]

On 02/02/2018 09:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.1 release.
> There are 55 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Greg Kroah-Hartman]

On Fri, Feb 02, 2018 at 03:17:42PM -0700, Shuah Khan wrote:
> On 02/02/2018 09:58 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.1 release.
> > There are 55 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Great, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Dan Rue]

On Fri, Feb 02, 2018 at 05:58:18PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.1 release.
> There are 55 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.

Results from Linaro’s test farm.

No regressions since 4.15 release, but you'll notice high failure counts
in kselftest. These are because it was the first RC and I ran the tests
multiple times - first without a skipfile, and then again with a partial
skipfile. All of the failures look like known issues that we also saw on
4.15 release.

Summary
------------------------------------------------------------------------

kernel: 4.15.1-rc1
git repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.15.y
git commit: b01b3d9519f250398695c7cc6493ba1e8fb072f4
git describe: v4.15-56-gb01b3d9519f2
Test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-4.15-oe/build/v4.15-56-gb01b3d9519f2


No regressions (compared to build )

Boards, architectures and test suites:
-------------------------------------

hi6220-hikey - arm64
* boot - pass: 38,
* kselftest - pass: 98, skip: 14, fail: 12
* libhugetlbfs - pass: 180, skip: 2,
* ltp-cap_bounds-tests - pass: 4,
* ltp-containers-tests - pass: 128,
* ltp-fcntl-locktests-tests - pass: 4,
* ltp-filecaps-tests - pass: 4,
* ltp-fs-tests - pass: 120,
* ltp-fs_bind-tests - pass: 4,
* ltp-fs_perms_simple-tests - pass: 38,
* ltp-fsx-tests - pass: 4,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 6,
* ltp-ipc-tests - pass: 18,
* ltp-math-tests - pass: 22,
* ltp-nptl-tests - pass: 4,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 20,
* ltp-securebits-tests - pass: 8,
* ltp-syscalls-tests - pass: 1968, skip: 242,
* ltp-timers-tests - pass: 24,

juno-r2 - arm64
* boot - pass: 31,
* kselftest - pass: 111, skip: 28, fail: 12
* libhugetlbfs - pass: 90, skip: 1,
* ltp-cap_bounds-tests - pass: 4,
* ltp-containers-tests - pass: 128,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 4,
* ltp-fs-tests - pass: 120,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 38,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 44,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 18,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 4,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 987, skip: 121,
* ltp-timers-tests - pass: 24,

x15 - arm
* boot - pass: 41,
* kselftest - pass: 92, skip: 32, fail: 15
* libhugetlbfs - pass: 174, skip: 2,
* ltp-cap_bounds-tests - pass: 4,
* ltp-containers-tests - pass: 124, fail: 4
* ltp-fcntl-locktests-tests - pass: 4,
* ltp-filecaps-tests - pass: 4,
* ltp-fs-tests - pass: 120,
* ltp-fs_bind-tests - pass: 4,
* ltp-fs_perms_simple-tests - pass: 38,
* ltp-fsx-tests - pass: 4,
* ltp-hugetlb-tests - pass: 40, skip: 4,
* ltp-io-tests - pass: 6,
* ltp-ipc-tests - pass: 18,
* ltp-math-tests - pass: 22,
* ltp-nptl-tests - pass: 4,
* ltp-pty-tests - pass: 8,
* ltp-sched-tests - pass: 26, skip: 2,
* ltp-securebits-tests - pass: 8,
* ltp-syscalls-tests - pass: 2076, skip: 132,
* ltp-timers-tests - pass: 24,

x86_64
* boot - pass: 40,
* kselftest - pass: 121, skip: 16, fail: 14
* libhugetlbfs - pass: 180, skip: 2,
* ltp-cap_bounds-tests - pass: 4,
* ltp-containers-tests - pass: 128,
* ltp-fcntl-locktests-tests - pass: 4,
* ltp-filecaps-tests - pass: 4,
* ltp-fs-tests - pass: 122, skip: 2,
* ltp-fs_bind-tests - pass: 4,
* ltp-fs_perms_simple-tests - pass: 38,
* ltp-fsx-tests - pass: 4,
* ltp-hugetlb-tests - pass: 44,
* ltp-io-tests - pass: 6,
* ltp-ipc-tests - pass: 18,
* ltp-math-tests - pass: 22,
* ltp-nptl-tests - pass: 4,
* ltp-pty-tests - pass: 8,
* ltp-sched-tests - pass: 18, skip: 2,
* ltp-securebits-tests - pass: 8,
* ltp-syscalls-tests - pass: 2032, skip: 232,
* ltp-timers-tests - pass: 24,


--
Linaro QA (beta)
https://qa-reports.linaro.org

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Greg Kroah-Hartman]

On Fri, Feb 02, 2018 at 10:35:19PM -0600, Dan Rue wrote:
> On Fri, Feb 02, 2018 at 05:58:18PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.1 release.
> > There are 55 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> 
> Results from Linaro’s test farm.
> 
> No regressions since 4.15 release, but you'll notice high failure counts
> in kselftest. These are because it was the first RC and I ran the tests
> multiple times - first without a skipfile, and then again with a partial
> skipfile. All of the failures look like known issues that we also saw on
> 4.15 release.

Why does kselftest need a "skip list"?  Shouldn't all of the tests that
ship in the kernel tree, pass on that release?  Is anyone looking into
the failures?  That seems like a pretty obvious thing :(

And was anyone testing the -rc releases to catch this before 4.15 came
out?  If not, why not?  I thought you all were testing rc releases
now...

Anyway, thanks for the reports.

thanks,

greg k-h

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Milosz Wasilewski]

On 3 February 2018 at 05:18, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Fri, Feb 02, 2018 at 10:35:19PM -0600, Dan Rue wrote:
>> On Fri, Feb 02, 2018 at 05:58:18PM +0100, Greg Kroah-Hartman wrote:
>> > This is the start of the stable review cycle for the 4.15.1 release.
>> > There are 55 patches in this series, all will be posted as a response
>> > to this one.  If anyone has any issues with these being applied, please
>> > let me know.
>> >
>> > Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
>> > Anything received after that time might be too late.
>> >
>> > The whole patch series can be found in one patch at:
>> >     kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.1-rc1.gz
>> > or in the git tree and branch at:
>> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
>> > and the diffstat can be found below.
>>
>> Results from Linaro’s test farm.
>>
>> No regressions since 4.15 release, but you'll notice high failure counts
>> in kselftest. These are because it was the first RC and I ran the tests
>> multiple times - first without a skipfile, and then again with a partial
>> skipfile. All of the failures look like known issues that we also saw on
>> 4.15 release.
>
> Why does kselftest need a "skip list"?  Shouldn't all of the tests that
> ship in the kernel tree, pass on that release?  Is anyone looking into
> the failures?  That seems like a pretty obvious thing :(

They should and it would be great to see that. Unfortunately this
isn't he case. Some examples (from 4.15):
test_kmod.sh - path to the module is wrong
https://lkml.org/lkml/2017/11/6/654

sync - missing cflags in makefile
https://patchwork.kernel.org/patch/10166499/

seccomp_bpf - open(2) is a legacy syscall, replaced with openat(2) since 2.6.16
https://lkml.org/lkml/2018/1/9/1141

reuseport_bpf: this test doesn't give consistent results. It usually
fails when ran from run_kselftests.sh script. Passes when run
standalone on 1st attempt and fails again on 2nd attempt.

There is also a group of tests (BPF) that are not correctly built in
our openembedded build. The OE recipe needs to be fixed to make sure
all .o files are where they are expected to be. There are more failed
tests, but I don't have a good explanation what is going on.

>
> And was anyone testing the -rc releases to catch this before 4.15 came
> out?  If not, why not?  I thought you all were testing rc releases
> now...

These are usually old problems and they are also included in the
skiplist for mainline. We're trying to report any regressions in
mainline tests, but this work has slightly lower priority than LTS :(

milosz

>
> Anyway, thanks for the reports.
>
> thanks,
>
> greg k-h
> _______________________________________________
> Lkft-triage mailing list
> Lkft-triage@lists.linaro.org
> https://lists.linaro.org/mailman/listinfo/lkft-triage

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Guenter Roeck]

On 02/02/2018 08:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.1 release.
> There are 55 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 147 pass: 146 fail: 1
Failed builds:
	mips:allmodconfig
Qemu test results:
	total: 126 pass: 126 fail: 0

The build failure is

ERROR: "sgimc" [drivers/watchdog/indydog.ko] undefined!

The problem is inherited from mainline. The fix should (hopefully) make it
into mainline in this commit window.

Guenter

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Greg Kroah-Hartman]

On Sat, Feb 03, 2018 at 07:34:17AM -0800, Guenter Roeck wrote:
> On 02/02/2018 08:58 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.1 release.
> > There are 55 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 147 pass: 146 fail: 1
> Failed builds:
> 	mips:allmodconfig
> Qemu test results:
> 	total: 126 pass: 126 fail: 0
> 
> The build failure is
> 
> ERROR: "sgimc" [drivers/watchdog/indydog.ko] undefined!
> 
> The problem is inherited from mainline. The fix should (hopefully) make it
> into mainline in this commit window.

Great, I'll watch out for it.  What arch is failing here?

thanks,

greg k-h

Re: [PATCH 4.15 00/55] 4.15.1-stable review

[Guenter Roeck]

On 02/03/2018 07:44 AM, Greg Kroah-Hartman wrote:
> On Sat, Feb 03, 2018 at 07:34:17AM -0800, Guenter Roeck wrote:
>> On 02/02/2018 08:58 AM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.15.1 release.
>>> There are 55 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun Feb  4 14:07:50 UTC 2018.
>>> Anything received after that time might be too late.
>>>
>>
>> Build results:
>> 	total: 147 pass: 146 fail: 1
>> Failed builds:
>> 	mips:allmodconfig
>> Qemu test results:
>> 	total: 126 pass: 126 fail: 0
>>
>> The build failure is
>>
>> ERROR: "sgimc" [drivers/watchdog/indydog.ko] undefined!
>>
>> The problem is inherited from mainline. The fix should (hopefully) make it
>> into mainline in this commit window.
> 
> Great, I'll watch out for it.  What arch is failing here?
> 

It is mips:allmodconfig, though other mips configurations may fail as well.

Guenter