From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:59588 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1423409AbeBOPiv (ORCPT ); Thu, 15 Feb 2018 10:38:51 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Hans de Goede , Marcel Holtmann Subject: [PATCH 4.14 158/195] Bluetooth: btsdio: Do not bind to non-removable BCM43341 Date: Thu, 15 Feb 2018 16:17:29 +0100 Message-Id: <20180215151713.831864646@linuxfoundation.org> In-Reply-To: <20180215151705.738773577@linuxfoundation.org> References: <20180215151705.738773577@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Hans de Goede commit b4cdaba274247c9c841c6a682c08fa91fb3aa549 upstream. BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT) use an UART connection for bluetooth. But they also advertise btsdio support on their 3th sdio function, this causes 2 problems: 1) A non functioning BT HCI getting registered 2) Since the btsdio driver does not have suspend/resume callbacks, mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify() to react as if the SDIO-card is removed and since the slot is marked as non-removable it will never get detected as inserted again. Which results in wifi no longer working after a suspend/resume. This commit fixes both by making btsdio ignore BCM43341 devices when connected to a slot which is marked non-removable. Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- drivers/bluetooth/btsdio.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -31,6 +31,7 @@ #include #include +#include #include #include @@ -292,6 +293,14 @@ static int btsdio_probe(struct sdio_func tuple = tuple->next; } + /* BCM43341 devices soldered onto the PCB (non-removable) use an + * uart connection for bluetooth, ignore the BT SDIO interface. + */ + if (func->vendor == SDIO_VENDOR_ID_BROADCOM && + func->device == SDIO_DEVICE_ID_BROADCOM_43341 && + !mmc_card_is_removable(func->card->host)) + return -ENODEV; + data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM;