public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <Alexander.Levin@microsoft.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Pixel Ding <Pixel.Ding@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	Sasha Levin <Alexander.Levin@microsoft.com>
Subject: [PATCH AUTOSEL for 4.15 02/78] drm/amdgpu: use polling mem to set SDMA3 wptr for VF
Date: Thu, 8 Mar 2018 04:56:01 +0000	[thread overview]
Message-ID: <20180308045525.7662-2-alexander.levin@microsoft.com> (raw)
In-Reply-To: <20180308045525.7662-1-alexander.levin@microsoft.com>

From: Pixel Ding <Pixel.Ding@amd.com>

[ Upstream commit 2ffe31deb27579e2f2c9444e01f4d8abf385d145 ]

On Tonga VF, there're 2 sources updating wptr registers for
sdma3: 1) polling mem and 2) doorbell. When doorbell and polling
mem are both enabled on sdma3, there will be collision hit in
occasion between those two sources when ucode and h/w are doing
the updating on wptr register in parallel. Issue doesn't happen
on CP GFX/Compute since CP drops all doorbell writes when VF is
inactive. So enable polling mem and don't use doorbell for SDMA3.

Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h |  1 +
 drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c   | 27 +++++++++++++++++++--------
 2 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
index b18c2b96691f..522a8742a60b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
@@ -187,6 +187,7 @@ struct amdgpu_ring {
 	uint64_t                eop_gpu_addr;
 	u32			doorbell_index;
 	bool			use_doorbell;
+	bool			use_pollmem;
 	unsigned		wptr_offs;
 	unsigned		fence_offs;
 	uint64_t		current_ctx;
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
index 6d06f8eb659f..cc4fc2e43b7b 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
@@ -355,7 +355,7 @@ static uint64_t sdma_v3_0_ring_get_wptr(struct amdgpu_ring *ring)
 	struct amdgpu_device *adev = ring->adev;
 	u32 wptr;
 
-	if (ring->use_doorbell) {
+	if (ring->use_doorbell || ring->use_pollmem) {
 		/* XXX check if swapping is necessary on BE */
 		wptr = ring->adev->wb.wb[ring->wptr_offs] >> 2;
 	} else {
@@ -380,10 +380,13 @@ static void sdma_v3_0_ring_set_wptr(struct amdgpu_ring *ring)
 
 	if (ring->use_doorbell) {
 		u32 *wb = (u32 *)&adev->wb.wb[ring->wptr_offs];
-
 		/* XXX check if swapping is necessary on BE */
 		WRITE_ONCE(*wb, (lower_32_bits(ring->wptr) << 2));
 		WDOORBELL32(ring->doorbell_index, lower_32_bits(ring->wptr) << 2);
+	} else if (ring->use_pollmem) {
+		u32 *wb = (u32 *)&adev->wb.wb[ring->wptr_offs];
+
+		WRITE_ONCE(*wb, (lower_32_bits(ring->wptr) << 2));
 	} else {
 		int me = (ring == &ring->adev->sdma.instance[0].ring) ? 0 : 1;
 
@@ -718,10 +721,14 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_RB_WPTR_POLL_ADDR_HI + sdma_offsets[i],
 		       upper_32_bits(wptr_gpu_addr));
 		wptr_poll_cntl = RREG32(mmSDMA0_GFX_RB_WPTR_POLL_CNTL + sdma_offsets[i]);
-		if (amdgpu_sriov_vf(adev))
-			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl, SDMA0_GFX_RB_WPTR_POLL_CNTL, F32_POLL_ENABLE, 1);
+		if (ring->use_pollmem)
+			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl,
+						       SDMA0_GFX_RB_WPTR_POLL_CNTL,
+						       ENABLE, 1);
 		else
-			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl, SDMA0_GFX_RB_WPTR_POLL_CNTL, F32_POLL_ENABLE, 0);
+			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl,
+						       SDMA0_GFX_RB_WPTR_POLL_CNTL,
+						       ENABLE, 0);
 		WREG32(mmSDMA0_GFX_RB_WPTR_POLL_CNTL + sdma_offsets[i], wptr_poll_cntl);
 
 		/* enable DMA RB */
@@ -1203,9 +1210,13 @@ static int sdma_v3_0_sw_init(void *handle)
 	for (i = 0; i < adev->sdma.num_instances; i++) {
 		ring = &adev->sdma.instance[i].ring;
 		ring->ring_obj = NULL;
-		ring->use_doorbell = true;
-		ring->doorbell_index = (i == 0) ?
-			AMDGPU_DOORBELL_sDMA_ENGINE0 : AMDGPU_DOORBELL_sDMA_ENGINE1;
+		if (!amdgpu_sriov_vf(adev)) {
+			ring->use_doorbell = true;
+			ring->doorbell_index = (i == 0) ?
+				AMDGPU_DOORBELL_sDMA_ENGINE0 : AMDGPU_DOORBELL_sDMA_ENGINE1;
+		} else {
+			ring->use_pollmem = true;
+		}
 
 		sprintf(ring->name, "sdma%d", i);
 		r = amdgpu_ring_init(adev, ring, 1024,
-- 
2.14.1

  parent reply	other threads:[~2018-03-08  4:56 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-08  4:56 [PATCH AUTOSEL for 4.15 01/78] ipmi_si: Fix error handling of platform device Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 03/78] Bluetooth: hci_qca: Avoid setup failure on missing rampatch Sasha Levin
2018-03-08  4:56 ` Sasha Levin [this message]
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 05/78] cpufreq: longhaul: Revert transition_delay_us to 200 ms Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 04/78] Bluetooth: btqcomsmd: Fix skb double free corruption Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 06/78] dt-bindings: net: add TI CC2560 Bluetooth chip Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 07/78] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 08/78] drm/msm: fix leak in failed get_pages Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 09/78] net: fec: add phy_reset_after_clk_enable() support Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 11/78] IB/ipoib: Warn when one port fails to initialize Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 10/78] dm: ensure bio submission follows a depth-first tree walk Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 13/78] hv_netvsc: Fix the receive buffer size limit Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 12/78] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 14/78] hv_netvsc: Fix the TX/RX buffer default sizes Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 15/78] tcp: allow TLP in ECN CWR Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 16/78] KVM: x86: add support for emulating UMIP Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 17/78] spi: sh-msiof: Avoid writing to registers from spi_master.setup() Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 18/78] libbpf: prefer global symbols as bpf program name source Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 20/78] rtlwifi: always initialize variables given to RT_TRACE() Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 19/78] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 21/78] media: bt8xx: Fix err 'bt878_probe()' Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 22/78] ath10k: handling qos at STA side based on AP WMM enable/disable Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 24/78] qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 23/78] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 25/78] tty: goldfish: Enable 'earlycon' only if built-in Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 26/78] serial: 8250_dw: Disable clock on error Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 28/78] watchdog: Fix potential kref imbalance when opening watchdog Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 27/78] cros_ec: fix nul-termination for firmware build info Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 30/78] platform/chrome: Use proper protocol transfer function Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 29/78] watchdog: Fix kref imbalance seen if handle_boot_enabled=0 Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 31/78] dmaengine: zynqmp_dma: Fix race condition in the probe Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 32/78] drm/tilcdc: ensure nonatomic iowrite64 is not used Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 33/78] mmc: avoid removing non-removable hosts during suspend Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 34/78] mmc: block: fix logical error to avoid memory leak Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 35/78] /dev/mem: Add bounce buffer for copy-out Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 36/78] net: phy: meson-gxl: check phy_write return value Sasha Levin
2018-03-08 10:18   ` Jerome Brunet
2018-03-08 12:34     ` Greg KH
2018-03-19 15:28       ` Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 37/78] sfp: fix EEPROM reading in the case of non-SFF8472 SFPs Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 39/78] media: s5p-mfc: Fix lock contention - request_firmware() once Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 38/78] sfp: fix non-detection of PHY Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 42/78] RDMA/cma: Use correct size when writing netlink stats Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 41/78] IB/ipoib: Avoid memory leak if the SA returns a different DGID Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 40/78] rtc: ac100: Fix multiple race conditions Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 44/78] iser-target: avoid reinitializing rdma contexts for isert commands Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 43/78] IB/umem: Fix use of npages/nmap fields Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 45/78] bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 46/78] PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 47/78] vgacon: Set VGA struct resource types Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 48/78] omapdrm: panel: fix compatible vendor string for td028ttec1 Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 50/78] drm/omap: DMM: Check for DMM readiness after successful transaction commit Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 49/78] mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 51/78] pty: cancel pty slave port buf's work in tty_release Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 53/78] PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 52/78] coresight: Fix disabling of CoreSight TPIU Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 56/78] media: davinci: fix a debug printk Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 55/78] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 54/78] PCI: endpoint: Fix find_first_zero_bit() usage Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 57/78] clk: check ops pointer on clock register Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 58/78] dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 60/78] pinctrl: Really force states during suspend/resume Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 59/78] clk: use round rate to bail out early in set_rate Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 61/78] pinctrl: rockchip: enable clock when reading pin direction register Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 62/78] iommu/vt-d: clean up pr_irq if request_threaded_irq fails Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 64/78] ip_gre: fix error path when erspan_rcv failed Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 63/78] ip6_vti: adjust vti mtu according to mtu of lower device Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 65/78] ip_gre: fix potential memory leak in erspan_rcv Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 66/78] soc: qcom: smsm: fix child-node lookup Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 67/78] scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 68/78] scsi: lpfc: Fix issues connecting with nvme initiator Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 69/78] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 70/78] ARM: dts: aspeed-evb: Add unit name to memory node Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 71/78] nfsd4: permit layoutget of executable-only files Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 72/78] clk: at91: pmc: Wait for clocks when resuming Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 73/78] clk: Don't touch hardware when reparenting during registration Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 75/78] clk: si5351: Rename internal plls to avoid name collisions Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 74/78] clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 76/78] crypto: artpec6 - set correct iv size for gcm(aes) Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 77/78] hwrng: core - Clean up RNG list when last hwrng is unregistered Sasha Levin
2018-03-08  4:56 ` [PATCH AUTOSEL for 4.15 78/78] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180308045525.7662-2-alexander.levin@microsoft.com \
    --to=alexander.levin@microsoft.com \
    --cc=Pixel.Ding@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox