From: Sasha Levin <Alexander.Levin@microsoft.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>,
Shawn Guo <shawnguo@kernel.org>,
Sasha Levin <Alexander.Levin@microsoft.com>
Subject: [PATCH AUTOSEL for 4.14 63/67] clk: Don't touch hardware when reparenting during registration
Date: Thu, 8 Mar 2018 04:58:00 +0000 [thread overview]
Message-ID: <20180308045641.7814-63-alexander.levin@microsoft.com> (raw)
In-Reply-To: <20180308045641.7814-1-alexander.levin@microsoft.com>
From: Stephen Boyd <sboyd@codeaurora.org>
[ Upstream commit f8f8f1d04494d3a6546bee3f0618c4dba31d7b72 ]
The orphan clocks reparent operation shouldn't touch the hardware
if clocks are enabled, otherwise it may get a chance to disable a
newly registered critical clock which triggers the warning below.
Assuming we have two clocks: A and B, B is the parent of A.
Clock A has flag: CLK_OPS_PARENT_ENABLE
Clock B has flag: CLK_IS_CRITICAL
Step 1:
Clock A is registered, then it becomes orphan.
Step 2:
Clock B is registered. Before clock B reach the critical clock enable
operation, orphan A will find the newly registered parent B and do
reparent operation, then parent B will be finally disabled in
__clk_set_parent_after() due to CLK_OPS_PARENT_ENABLE flag as there's
still no users of B which will then trigger the following warning.
WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:597 clk_core_disable+0xb4/0xe0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00056-gdff1f66-dirty #1373
Hardware name: Generic DT based system
Backtrace:
[<c010c4bc>] (dump_backtrace) from [<c010c764>] (show_stack+0x18/0x1c)
r6:600000d3 r5:00000000 r4:c0e26358 r3:00000000
[<c010c74c>] (show_stack) from [<c040599c>] (dump_stack+0xb4/0xe8)
[<c04058e8>] (dump_stack) from [<c0125c94>] (__warn+0xd8/0x104)
r10:c0c21cd0 r9:c048aa78 r8:00000255 r7:00000009 r6:c0c1cd90 r5:00000000
r4:00000000 r3:c0e01d34
[<c0125bbc>] (__warn) from [<c0125d74>] (warn_slowpath_null+0x28/0x30)
r9:00000000 r8:ef00bf80 r7:c165ac4c r6:ef00bf80 r5:ef00bf80 r4:ef00bf80
[<c0125d4c>] (warn_slowpath_null) from [<c048aa78>] (clk_core_disable+0xb4/0xe0)
[<c048a9c4>] (clk_core_disable) from [<c048be88>] (clk_core_disable_lock+0x20/0x2c)
r4:000000d3 r3:c0e0af00
[<c048be68>] (clk_core_disable_lock) from [<c048c224>] (clk_core_disable_unprepare+0x14/0x28)
r5:00000000 r4:ef00bf80
[<c048c210>] (clk_core_disable_unprepare) from [<c048c270>] (__clk_set_parent_after+0x38/0x54)
r4:ef00bd80 r3:000010a0
[<c048c238>] (__clk_set_parent_after) from [<c048daa8>] (clk_register+0x4d0/0x648)
r6:ef00d500 r5:ef00bf80 r4:ef00bd80 r3:ef00bfd4
[<c048d5d8>] (clk_register) from [<c048dc30>] (clk_hw_register+0x10/0x1c)
r9:00000000 r8:00000003 r7:00000000 r6:00000824 r5:00000001 r4:ef00d500
[<c048dc20>] (clk_hw_register) from [<c048e698>] (_register_divider+0xcc/0x120)
[<c048e5cc>] (_register_divider) from [<c048e730>] (clk_register_divider+0x44/0x54)
r10:00000004 r9:00000003 r8:00000001 r7:00000000 r6:00000003 r5:00000001
r4:f0810030
[<c048e6ec>] (clk_register_divider) from [<c0d3ff58>] (imx7ulp_clocks_init+0x558/0xe98)
r7:c0e296f8 r6:c165c808 r5:00000000 r4:c165c808
[<c0d3fa00>] (imx7ulp_clocks_init) from [<c0d24db0>] (of_clk_init+0x118/0x1e0)
r10:00000001 r9:c0e01f68 r8:00000000 r7:c0e01f60 r6:ef7f8974 r5:ef0035c0
r4:00000006
[<c0d24c98>] (of_clk_init) from [<c0d04a50>] (time_init+0x2c/0x38)
r10:efffed40 r9:c0d61a48 r8:c0e78000 r7:c0e07900 r6:ffffffff r5:c0e78000
r4:00000000
[<c0d04a24>] (time_init) from [<c0d00b8c>] (start_kernel+0x218/0x394)
[<c0d00974>] (start_kernel) from [<6000807c>] (0x6000807c)
r10:00000000 r9:410fc075 r8:6000406a r7:c0e0c930 r6:c0d61a44 r5:c0e07918
r4:c0e78294
We know that the clk isn't enabled with any sort of prepare_count
here so we don't need to enable anything to prevent a race. And
we're holding the prepare mutex so set_rate/set_parent can't race
here either. Based on an earlier patch by Dong Aisheng.
Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/clk/clk.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index c8d83acda006..416d44cc772c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2476,14 +2476,17 @@ static int __clk_core_init(struct clk_core *core)
*/
hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
struct clk_core *parent = __clk_init_parent(orphan);
+ unsigned long flags;
/*
* we could call __clk_set_parent, but that would result in a
* redundant call to the .set_rate op, if it exists
*/
if (parent) {
- __clk_set_parent_before(orphan, parent);
- __clk_set_parent_after(orphan, parent, NULL);
+ /* update the clk tree topology */
+ flags = clk_enable_lock();
+ clk_reparent(orphan, parent);
+ clk_enable_unlock(flags);
__clk_recalc_accuracies(orphan);
__clk_recalc_rates(orphan, 0);
}
--
2.14.1
next prev parent reply other threads:[~2018-03-08 4:59 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 4:57 [PATCH AUTOSEL for 4.14 01/67] Bluetooth: hci_qca: Avoid setup failure on missing rampatch Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 03/67] cpufreq: longhaul: Revert transition_delay_us to 200 ms Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 02/67] Bluetooth: btqcomsmd: Fix skb double free corruption Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 06/67] drm/msm: fix leak in failed get_pages Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 05/67] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 04/67] dt-bindings: net: add TI CC2560 Bluetooth chip Sasha Levin
2018-03-08 16:09 ` David Lechner
2018-03-09 16:38 ` Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 08/67] dm: ensure bio submission follows a depth-first tree walk Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 07/67] net: fec: add phy_reset_after_clk_enable() support Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 10/67] hv_netvsc: Fix the receive buffer size limit Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 09/67] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 11/67] hv_netvsc: Fix the TX/RX buffer default sizes Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 12/67] KVM: x86: add support for emulating UMIP Sasha Levin
2018-03-08 6:46 ` Paolo Bonzini
2018-03-19 15:22 ` Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 13/67] spi: sh-msiof: Avoid writing to registers from spi_master.setup() Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 14/67] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 15/67] rtlwifi: always initialize variables given to RT_TRACE() Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 16/67] media: bt8xx: Fix err 'bt878_probe()' Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 17/67] ath10k: handling qos at STA side based on AP WMM enable/disable Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 18/67] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 19/67] qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 21/67] serial: 8250_dw: Disable clock on error Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 20/67] tty: goldfish: Enable 'earlycon' only if built-in Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 22/67] cros_ec: fix nul-termination for firmware build info Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 23/67] watchdog: Fix potential kref imbalance when opening watchdog Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 24/67] watchdog: Fix kref imbalance seen if handle_boot_enabled=0 Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 26/67] dmaengine: zynqmp_dma: Fix race condition in the probe Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 25/67] platform/chrome: Use proper protocol transfer function Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 28/67] mmc: avoid removing non-removable hosts during suspend Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 27/67] drm/tilcdc: ensure nonatomic iowrite64 is not used Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 29/67] mmc: block: fix logical error to avoid memory leak Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 30/67] /dev/mem: Add bounce buffer for copy-out Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 33/67] sfp: fix non-detection of PHY Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 31/67] net: phy: meson-gxl: check phy_write return value Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 32/67] sfp: fix EEPROM reading in the case of non-SFF8472 SFPs Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 35/67] rtc: ac100: Fix multiple race conditions Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 34/67] media: s5p-mfc: Fix lock contention - request_firmware() once Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 37/67] RDMA/cma: Use correct size when writing netlink stats Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 36/67] IB/ipoib: Avoid memory leak if the SA returns a different DGID Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 38/67] IB/umem: Fix use of npages/nmap fields Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 39/67] iser-target: avoid reinitializing rdma contexts for isert commands Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 41/67] omapdrm: panel: fix compatible vendor string for td028ttec1 Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 40/67] vgacon: Set VGA struct resource types Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 42/67] mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 44/67] pty: cancel pty slave port buf's work in tty_release Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 43/67] drm/omap: DMM: Check for DMM readiness after successful transaction commit Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 45/67] coresight: Fix disabling of CoreSight TPIU Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 46/67] PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 47/67] PCI: endpoint: Fix find_first_zero_bit() usage Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 49/67] media: davinci: fix a debug printk Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 48/67] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 50/67] pinctrl: Really force states during suspend/resume Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 51/67] pinctrl: rockchip: enable clock when reading pin direction register Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 52/67] iommu/vt-d: clean up pr_irq if request_threaded_irq fails Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 53/67] ip6_vti: adjust vti mtu according to mtu of lower device Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 55/67] ip_gre: fix potential memory leak in erspan_rcv Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 54/67] ip_gre: fix error path when erspan_rcv failed Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 56/67] soc: qcom: smsm: fix child-node lookup Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 58/67] scsi: lpfc: Fix issues connecting with nvme initiator Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 57/67] scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 59/67] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 60/67] ARM: dts: aspeed-evb: Add unit name to memory node Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 62/67] clk: at91: pmc: Wait for clocks when resuming Sasha Levin
2018-03-08 4:57 ` [PATCH AUTOSEL for 4.14 61/67] nfsd4: permit layoutget of executable-only files Sasha Levin
2018-03-08 4:58 ` Sasha Levin [this message]
2018-03-08 4:58 ` [PATCH AUTOSEL for 4.14 65/67] clk: si5351: Rename internal plls to avoid name collisions Sasha Levin
2018-03-08 4:58 ` [PATCH AUTOSEL for 4.14 64/67] clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() Sasha Levin
2018-03-08 4:58 ` [PATCH AUTOSEL for 4.14 66/67] crypto: artpec6 - set correct iv size for gcm(aes) Sasha Levin
2018-03-08 4:58 ` [PATCH AUTOSEL for 4.14 67/67] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180308045641.7814-63-alexander.levin@microsoft.com \
--to=alexander.levin@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox