[PATCH AUTOSEL for 4.4 001/101] usb: dwc2: Make sure we disconnect the gadget state

[PATCH AUTOSEL for 4.4 001/101] usb: dwc2: Make sure we disconnect the gadget state

[Sasha Levin]

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit dad3f793f20fbb5c0c342f0f5a0bdf69a4d76089 ]

I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I plugged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every
plug in.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/dwc2/hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 571c21727ff9..88bd950665fa 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1385,6 +1385,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false, -1);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 002/101] usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()

[Sasha Levin]

From: Yuyang Du <yuyang.du@intel.com>

[ Upstream commit 9f20dfb44d03745d0d3cef2ffb3abf8d8024fa61 ]

This fixes the commit: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add
SuperSpeed support").

In the case of ClearPortFeature and USB_PORT_FEAT_POWER, simply clear
the right bit regardless of what the wValue is.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/gadget/udc/dummy_hcd.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8080a11947b7..eb876ed96861 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2105,16 +2105,13 @@ static int dummy_hub_control(
 			}
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (hcd->speed == HCD_USB3) {
-				if (dum_hcd->port_status & USB_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			} else
-				if (dum_hcd->port_status &
-							USB_SS_PORT_STAT_POWER)
-					dev_dbg(dummy_dev(dum_hcd),
-						"power-off\n");
-			/* FALLS THROUGH */
+			dev_dbg(dummy_dev(dum_hcd), "power-off\n");
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
+			break;
 		default:
 			dum_hcd->port_status &= ~(1 << wValue);
 			set_link_state(dum_hcd);
@@ -2285,14 +2282,13 @@ static int dummy_hub_control(
 				if ((dum_hcd->port_status &
 				     USB_SS_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
 			} else
 				if ((dum_hcd->port_status &
 				     USB_PORT_STAT_POWER) != 0) {
 					dum_hcd->port_status |= (1 << wValue);
-					set_link_state(dum_hcd);
 				}
+			set_link_state(dum_hcd);
 		}
 		break;
 	case GetPortErrorCount:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 003/101] drivers/perf: arm_pmu: handle no platform_device

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 7654137071fa706e5c91f4f27bc2a5cd7e435a9b ]

In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire
platdata, so that we can defer to platform-specific IRQ handling,
required on some 32-bit parts. With the advent of ACPI we won't always
have a platform_device, and so we must avoid trying to dereference
fields from it.

This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing
a new armpmu_get_platdata() helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/perf/arm_pmu.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 8af1f900ea65..1ba58fb6f796 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -321,10 +321,16 @@ validate_group(struct perf_event *event)
 	return 0;
 }
 
+static struct arm_pmu_platdata *armpmu_get_platdata(struct arm_pmu *armpmu)
+{
+	struct platform_device *pdev = armpmu->plat_device;
+
+	return pdev ? dev_get_platdata(&pdev->dev) : NULL;
+}
+
 static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 {
 	struct arm_pmu *armpmu;
-	struct platform_device *plat_device;
 	struct arm_pmu_platdata *plat;
 	int ret;
 	u64 start_clock, finish_clock;
@@ -336,8 +342,8 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
 	 * dereference.
 	 */
 	armpmu = *(void **)dev;
-	plat_device = armpmu->plat_device;
-	plat = dev_get_platdata(&plat_device->dev);
+
+	plat = armpmu_get_platdata(armpmu);
 
 	start_clock = sched_clock();
 	if (plat && plat->handle_irq)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 005/101] scsi: sg: check for valid direction before starting the request

[Sasha Levin]

From: Johannes Thumshirn <jthumshirn@suse.de>

[ Upstream commit 28676d869bbb5257b5f14c0c95ad3af3a7019dd5 ]

Check for a valid direction before starting the request, otherwise we
risk running into an assertion in the scsi midlayer checking for valid
requests.

[mkp: fixed typo]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: http://www.spinics.net/lists/linux-scsi/msg104400.html
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/sg.c | 46 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 0f0ff75755e0..27f92f4ea6bc 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -674,18 +674,14 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 	 * is a non-zero input_size, so emit a warning.
 	 */
 	if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) {
-		static char cmd[TASK_COMM_LEN];
-		if (strcmp(current->comm, cmd)) {
-			printk_ratelimited(KERN_WARNING
-					   "sg_write: data in/out %d/%d bytes "
-					   "for SCSI command 0x%x-- guessing "
-					   "data in;\n   program %s not setting "
-					   "count and/or reply_len properly\n",
-					   old_hdr.reply_len - (int)SZ_SG_HEADER,
-					   input_size, (unsigned int) cmnd[0],
-					   current->comm);
-			strcpy(cmd, current->comm);
-		}
+		printk_ratelimited(KERN_WARNING
+				   "sg_write: data in/out %d/%d bytes "
+				   "for SCSI command 0x%x-- guessing "
+				   "data in;\n   program %s not setting "
+				   "count and/or reply_len properly\n",
+				   old_hdr.reply_len - (int)SZ_SG_HEADER,
+				   input_size, (unsigned int) cmnd[0],
+				   current->comm);
 	}
 	k = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking);
 	return (k < 0) ? k : count;
@@ -764,6 +760,29 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 	return count;
 }
 
+static bool sg_is_valid_dxfer(sg_io_hdr_t *hp)
+{
+	switch (hp->dxfer_direction) {
+	case SG_DXFER_NONE:
+		if (hp->dxferp || hp->dxfer_len > 0)
+			return false;
+		return true;
+	case SG_DXFER_TO_DEV:
+	case SG_DXFER_FROM_DEV:
+	case SG_DXFER_TO_FROM_DEV:
+		if (!hp->dxferp || hp->dxfer_len == 0)
+			return false;
+		return true;
+	case SG_DXFER_UNKNOWN:
+		if ((!hp->dxferp && hp->dxfer_len) ||
+		    (hp->dxferp && hp->dxfer_len == 0))
+			return false;
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int
 sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		unsigned char *cmnd, int timeout, int blocking)
@@ -784,6 +803,9 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 			"sg_common_write:  scsi opcode=0x%02x, cmd_size=%d\n",
 			(int) cmnd[0], (int) hp->cmd_len));
 
+	if (!sg_is_valid_dxfer(hp))
+		return -EINVAL;
+
 	k = sg_start_req(srp, cmnd);
 	if (k) {
 		SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 004/101] perf session: Don't rely on evlist in pipe mode

[Sasha Levin]

From: David Carrillo-Cisneros <davidcc@google.com>

[ Upstream commit 0973ad97c187e06aece61f685b9c3b2d93290a73 ]

Session sets a number parameters that rely on evlist. These parameters
are not used in pipe-mode and should not be set, since evlist is
unavailable. Fix that.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com
[ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/session.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 468de95bc8bb..4ff7c425a706 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -135,8 +135,14 @@ struct perf_session *perf_session__new(struct perf_data_file *file,
 			if (perf_session__open(session) < 0)
 				goto out_close;
 
-			perf_session__set_id_hdr_size(session);
-			perf_session__set_comm_exec(session);
+			/*
+			 * set session attributes that are present in perf.data
+			 * but not in pipe-mode.
+			 */
+			if (!file->is_pipe) {
+				perf_session__set_id_hdr_size(session);
+				perf_session__set_comm_exec(session);
+			}
 		}
 	} else  {
 		session->machines.host.env = &perf_env;
@@ -151,7 +157,11 @@ struct perf_session *perf_session__new(struct perf_data_file *file,
 			pr_warning("Cannot read kernel map\n");
 	}
 
-	if (tool && tool->ordering_requires_timestamps &&
+	/*
+	 * In pipe-mode, evlist is empty until PERF_RECORD_HEADER_ATTR is
+	 * processed, so perf_evlist__sample_id_all is not meaningful here.
+	 */
+	if ((!file || !file->is_pipe) && tool && tool->ordering_requires_timestamps &&
 	    tool->ordered_events && !perf_evlist__sample_id_all(session->evlist)) {
 		dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
 		tool->ordered_events = false;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 006/101] scsi: sg: close race condition in sg_remove_sfp_usercontext()

[Sasha Levin]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 97d27b0dd015e980ade63fda111fd1353276e28b ]

sg_remove_sfp_usercontext() is clearing any sg requests, but needs to
take 'rq_list_lock' when modifying the list.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/sg.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 27f92f4ea6bc..dedaf3e89bb5 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -535,6 +535,7 @@ sg_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
 	} else
 		count = (old_hdr->result == 0) ? 0 : -EIO;
 	sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	retval = count;
 free_old_hdr:
 	kfree(old_hdr);
@@ -575,6 +576,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 	}
 err_out:
 	err2 = sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	return err ? : err2 ? : count;
 }
 
@@ -811,6 +813,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		SCSI_LOG_TIMEOUT(1, sg_printk(KERN_INFO, sfp->parentdp,
 			"sg_common_write: start_req err=%d\n", k));
 		sg_finish_rem_req(srp);
+		sg_remove_request(sfp, srp);
 		return k;	/* probably out of space --> ENOMEM */
 	}
 	if (atomic_read(&sdp->detaching)) {
@@ -823,6 +826,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		}
 
 		sg_finish_rem_req(srp);
+		sg_remove_request(sfp, srp);
 		return -ENODEV;
 	}
 
@@ -1312,6 +1316,7 @@ sg_rq_end_io_usercontext(struct work_struct *work)
 	struct sg_fd *sfp = srp->parentfp;
 
 	sg_finish_rem_req(srp);
+	sg_remove_request(sfp, srp);
 	kref_put(&sfp->f_ref, sg_remove_sfp);
 }
 
@@ -1856,8 +1861,6 @@ sg_finish_rem_req(Sg_request *srp)
 	else
 		sg_remove_scat(sfp, req_schp);
 
-	sg_remove_request(sfp, srp);
-
 	return ret;
 }
 
@@ -2204,12 +2207,17 @@ sg_remove_sfp_usercontext(struct work_struct *work)
 	struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work);
 	struct sg_device *sdp = sfp->parentdp;
 	Sg_request *srp;
+	unsigned long iflags;
 
 	/* Cleanup any responses which were never read(). */
+	write_lock_irqsave(&sfp->rq_list_lock, iflags);
 	while (!list_empty(&sfp->rq_list)) {
 		srp = list_first_entry(&sfp->rq_list, Sg_request, entry);
 		sg_finish_rem_req(srp);
+		list_del(&srp->entry);
+		srp->parentfp = NULL;
 	}
+	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
 
 	if (sfp->reserve.bufflen > 0) {
 		SCSI_LOG_TIMEOUT(6, sg_printk(KERN_INFO, sdp,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 008/101] kprobes/x86: Set kprobes pages read-only

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit d0381c81c2f782fa2131178d11e0cfb23d50d631 ]

Set the pages which is used for kprobes' singlestep buffer
and optprobe's trampoline instruction buffer to readonly.
This can prevent unexpected (or unintended) instruction
modification.

This also passes rodata_test as below.

Without this patch, rodata_test shows a warning:

  WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:235 note_page+0x7a9/0xa20
  x86/mm: Found insecure W+X mapping at address ffffffffa0000000/0xffffffffa0000000

With this fix, no W+X pages are found:

  x86/mm: Checked W+X mappings: passed, no W+X pages found.
  rodata_test: all tests were successful

Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076375592.22469.14174394514338612247.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/kprobes/core.c | 4 ++++
 arch/x86/kernel/kprobes/opt.c  | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 5d11d01f75de..565e24e9ddf2 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -406,6 +406,8 @@ static int arch_copy_kprobe(struct kprobe *p)
 {
 	int ret;
 
+	set_memory_rw((unsigned long)p->ainsn.insn & PAGE_MASK, 1);
+
 	/* Copy an instruction with recovering if other optprobe modifies it.*/
 	ret = __copy_instruction(p->ainsn.insn, p->addr);
 	if (!ret)
@@ -420,6 +422,8 @@ static int arch_copy_kprobe(struct kprobe *p)
 	else
 		p->ainsn.boostable = -1;
 
+	set_memory_ro((unsigned long)p->ainsn.insn & PAGE_MASK, 1);
+
 	/* Check whether the instruction modifies Interrupt Flag or not */
 	p->ainsn.if_modifier = is_IF_modifier(p->ainsn.insn);
 
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index ea8e2b846101..7aba9d6475a5 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -370,6 +370,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 	}
 
 	buf = (u8 *)op->optinsn.insn;
+	set_memory_rw((unsigned long)buf & PAGE_MASK, 1);
 
 	/* Copy instructions into the out-of-line buffer */
 	ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
@@ -392,6 +393,8 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 	synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
 			   (u8 *)op->kp.addr + op->optinsn.size);
 
+	set_memory_ro((unsigned long)buf & PAGE_MASK, 1);
+
 	flush_icache_range((unsigned long) buf,
 			   (unsigned long) buf + TMPL_END_IDX +
 			   op->optinsn.size + RELATIVEJUMP_SIZE);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 007/101] kprobes/x86: Fix kprobe-booster not to boost far call instructions

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit bd0b90676c30fe640e7ead919b3e38846ac88ab7 ]

Fix the kprobe-booster not to boost far call instruction,
because a call may store the address in the single-step
execution buffer to the stack, which should be modified
after single stepping.

Currently, this instruction will be filtered as not
boostable in resume_execution(), so this is not a
critical issue.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076340615.22469.14066273186134229909.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/kprobes/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 99d293ea2b49..5d11d01f75de 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -196,6 +196,8 @@ int can_boost(kprobe_opcode_t *opcodes, void *addr)
 		return (opcode != 0x62 && opcode != 0x67);
 	case 0x70:
 		return 0; /* can't boost conditional jump */
+	case 0x90:
+		return opcode != 0x9a;	/* can't boost call far */
 	case 0xc0:
 		/* can't boost software-interruptions */
 		return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 009/101] pwm: tegra: Increase precision in PWM rate calculation

[Sasha Levin]

From: Laxman Dewangan <ldewangan@nvidia.com>

[ Upstream commit 250b76f43f57d578ebff5e7211eb2c73aa5cd6ca ]

The rate of the PWM calculated as follows:

	hz = NSEC_PER_SEC / period_ns;
 	rate = (rate + (hz / 2)) / hz;

This has the precision loss in lower PWM rate.

Change this to have more precision as:

	hz = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC * 100, period_ns);
	rate = DIV_ROUND_CLOSEST(rate * 100, hz)

Example:

1. period_ns = 16672000, PWM clock rate is 200 KHz.

	Based on old formula
		hz = NSEC_PER_SEC / period_ns
		   = 1000000000ul/16672000
		   = 59 (59.98)
		rate = (200K + 59/2)/59 = 3390

	Based on new method:
		hz = 5998
		rate = DIV_ROUND_CLOSE(200000*100, 5998) = 3334

	If we measure the PWM signal rate, we will get more accurate
	period with rate value of 3334 instead of 3390.

2.  period_ns = 16803898, PWM clock rate is 200 KHz.

	Based on old formula:
		hz = 59, rate = 3390

	Based on new formula:
		hz = 5951, rate = 3360

	The PWM signal rate of 3360 is more near to requested period
	than 3333.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pwm/pwm-tegra.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index d4de0607b502..3039fb762893 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -69,6 +69,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
 	unsigned long long c;
 	unsigned long rate, hz;
+	unsigned long long ns100 = NSEC_PER_SEC;
 	u32 val = 0;
 	int err;
 
@@ -87,9 +88,11 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * cycles at the PWM clock rate will take period_ns nanoseconds.
 	 */
 	rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH;
-	hz = NSEC_PER_SEC / period_ns;
 
-	rate = (rate + (hz / 2)) / hz;
+	/* Consider precision in PWM_SCALE_WIDTH rate calculation */
+	ns100 *= 100;
+	hz = DIV_ROUND_CLOSEST_ULL(ns100, period_ns);
+	rate = DIV_ROUND_CLOSEST(rate * 100, hz);
 
 	/*
 	 * Since the actual PWM divider is the register's frequency divider
-- 
2.14.1

[PATCH AUTOSEL for 4.4 010/101] wil6210: fix memory access violation in wil_memcpy_from/toio_32

[Sasha Levin]

From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>

[ Upstream commit 0f6edfe2bbbb59d161580cb4870fcc46f5490f85 ]

In case count is not multiple of 4, there is a read access in
wil_memcpy_toio_32() from outside src buffer boundary.
In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is
a write access to outside dst io memory boundary.

Fix these issues with proper handling of the last 1 to 4 copied bytes.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 85bca557a339..f09fafaaaf1a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -125,9 +125,15 @@ void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
 	u32 *d = dst;
 	const volatile u32 __iomem *s = src;
 
-	/* size_t is unsigned, if (count%4 != 0) it will wrap */
-	for (count += 4; count > 4; count -= 4)
+	for (; count >= 4; count -= 4)
 		*d++ = __raw_readl(s++);
+
+	if (unlikely(count)) {
+		/* count can be 1..3 */
+		u32 tmp = __raw_readl(s);
+
+		memcpy(d, &tmp, count);
+	}
 }
 
 void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
@@ -136,8 +142,16 @@ void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
 	volatile u32 __iomem *d = dst;
 	const u32 *s = src;
 
-	for (count += 4; count > 4; count -= 4)
+	for (; count >= 4; count -= 4)
 		__raw_writel(*s++, d++);
+
+	if (unlikely(count)) {
+		/* count can be 1..3 */
+		u32 tmp = 0;
+
+		memcpy(&tmp, s, count);
+		__raw_writel(tmp, d);
+	}
 }
 
 static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 011/101] platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA

[Sasha Levin]

From: Santeri Toivonen <santeri.toivonen@vatsul.com>

[ Upstream commit f35823619db8bbaa2afea8705f239c3cecb9d22f ]

Asus laptop X302UA starts up with Wi-Fi disabled,
without a way to enable it. Set wapf=4 to fix the problem.

Signed-off-by: Santeri Toivonen <santeri.toivonen@vatsul.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/asus-nb-wmi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index a3661cc44f86..0e0403e024c5 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -99,6 +99,15 @@ static const struct dmi_system_id asus_quirks[] = {
 		 */
 		.driver_data = &quirk_asus_wapf4,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X302UA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X302UA"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
 	{
 		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X401U",
-- 
2.14.1

[PATCH AUTOSEL for 4.4 012/101] regulator: anatop: set default voltage selector for pcie

[Sasha Levin]

From: Dong Aisheng <aisheng.dong@nxp.com>

[ Upstream commit 9bf944548169f6153c3d3778cf983cb5db251a0e ]

Set the initial voltage selector for vddpcie in case it's disabled
by default.

This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/regulator/anatop-regulator.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 3a6d0290c54c..c5e272ea4372 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,6 +296,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
+		/* set the default voltage of the pcie phy to be 1.100v */
+		if (!sreg->sel && rdesc->name &&
+		    !strcmp(rdesc->name, "vddpcie"))
+			sreg->sel = 0x10;
+
 		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 013/101] x86: i8259: export legacy_pic symbol

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7ee06cb2f840a96be46233181ed4557901a74385 ]

The classic PC rtc-coms driver has a workaround for broken ACPI device
nodes for it which lack an irq resource. This workaround used to
unconditionally hardcode the irq to 8 in these cases.

This was causing irq conflict problems on systems without a legacy-pic
so a recent patch added an if (nr_legacy_irqs()) guard to the
workaround to avoid this irq conflict.

nr_legacy_irqs() uses the legacy_pic symbol under the hood causing
an undefined symbol error if the rtc-cmos code is build as a module.

This commit exports the legacy_pic symbol to fix this.

Cc: rtc-linux@googlegroups.com
Cc: alexandre.belloni@free-electrons.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/i8259.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index be22f5a2192e..4e3b8a587c88 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -418,6 +418,7 @@ struct legacy_pic default_legacy_pic = {
 };
 
 struct legacy_pic *legacy_pic = &default_legacy_pic;
+EXPORT_SYMBOL(legacy_pic);
 
 static int __init i8259A_init_ops(void)
 {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 014/101] rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit a1e23a42f1bdc00e32fc4869caef12e4e6272f26 ]

On some systems (e.g. Intel Bay Trail systems) the legacy PIC is not
used, in this case virq 8 will be a random irq, rather then hw_irq 8
from the PIC.

Requesting virq 8 in this case will not help us to get alarm irqs and
may cause problems for other drivers which actually do need virq 8,
for example on an Asus Transformer T100TA this leads to:

[ 28.745155] genirq: Flags mismatch irq 8. 00000088 (mmc0) vs. 00000080 (rtc0)
<snip oops>
[ 28.753700] mmc0: Failed to request IRQ 8: -16
[ 28.975934] sdhci-acpi: probe of 80860F14:01 failed with error -16

This commit fixes this by making the rtc-cmos driver continue
without using an irq rather then claiming irq 8 when no irq is
specified in the pnp-info and there are no legacy-irqs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/rtc-cmos.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 8f7034ba7d9e..86015b393dd5 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -41,6 +41,9 @@
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#ifdef CONFIG_X86
+#include <asm/i8259.h>
+#endif
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1058,17 +1061,23 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
 	cmos_wake_setup(&pnp->dev);
 
-	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0))
+	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
+		unsigned int irq = 0;
+#ifdef CONFIG_X86
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
-		 * hardcode it in these cases
+		 * hardcode it on systems with a legacy PIC.
 		 */
+		if (nr_legacy_irqs())
+			irq = 8;
+#endif
 		return cmos_do_probe(&pnp->dev,
-				pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
-	else
+				pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
+	} else {
 		return cmos_do_probe(&pnp->dev,
 				pnp_get_resource(pnp, IORESOURCE_IO, 0),
 				pnp_irq(pnp, 0));
+	}
 }
 
 static void __exit cmos_pnp_remove(struct pnp_dev *pnp)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 016/101] time: Change posix clocks ops interfaces to use timespec64

[Sasha Levin]

From: Deepa Dinamani <deepa.kernel@gmail.com>

[ Upstream commit d340266e19ddb70dbd608f9deedcfb35fdb9d419 ]

struct timespec is not y2038 safe on 32 bit machines.

The posix clocks apis use struct timespec directly and through struct
itimerspec.

Replace the posix clock interfaces to use struct timespec64 and struct
itimerspec64 instead.  Also fix up their implementations accordingly.

Note that the clock_getres() interface has also been changed to use
timespec64 even though this particular interface is not affected by the
y2038 problem. This helps verification for internal kernel code for y2038
readiness by getting rid of time_t/ timeval/ timespec.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: arnd@arndb.de
Cc: y2038@lists.linaro.org
Cc: netdev@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/1490555058-4603-3-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ptp/ptp_clock.c     | 18 +++++++-----------
 include/linux/posix-clock.h | 10 +++++-----
 kernel/time/posix-clock.c   | 34 ++++++++++++++++++++++++----------
 3 files changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index 2e481b9e8ea5..60a5e0c63a13 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -97,30 +97,26 @@ static s32 scaled_ppm_to_ppb(long ppm)
 
 /* posix clock implementation */
 
-static int ptp_clock_getres(struct posix_clock *pc, struct timespec *tp)
+static int ptp_clock_getres(struct posix_clock *pc, struct timespec64 *tp)
 {
 	tp->tv_sec = 0;
 	tp->tv_nsec = 1;
 	return 0;
 }
 
-static int ptp_clock_settime(struct posix_clock *pc, const struct timespec *tp)
+static int ptp_clock_settime(struct posix_clock *pc, const struct timespec64 *tp)
 {
 	struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
-	struct timespec64 ts = timespec_to_timespec64(*tp);
 
-	return  ptp->info->settime64(ptp->info, &ts);
+	return  ptp->info->settime64(ptp->info, tp);
 }
 
-static int ptp_clock_gettime(struct posix_clock *pc, struct timespec *tp)
+static int ptp_clock_gettime(struct posix_clock *pc, struct timespec64 *tp)
 {
 	struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
-	struct timespec64 ts;
 	int err;
 
-	err = ptp->info->gettime64(ptp->info, &ts);
-	if (!err)
-		*tp = timespec64_to_timespec(ts);
+	err = ptp->info->gettime64(ptp->info, tp);
 	return err;
 }
 
@@ -133,7 +129,7 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct timex *tx)
 	ops = ptp->info;
 
 	if (tx->modes & ADJ_SETOFFSET) {
-		struct timespec ts;
+		struct timespec64 ts;
 		ktime_t kt;
 		s64 delta;
 
@@ -146,7 +142,7 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct timex *tx)
 		if ((unsigned long) ts.tv_nsec >= NSEC_PER_SEC)
 			return -EINVAL;
 
-		kt = timespec_to_ktime(ts);
+		kt = timespec64_to_ktime(ts);
 		delta = ktime_to_ns(kt);
 		err = ops->adjtime(ops, delta);
 	} else if (tx->modes & ADJ_FREQUENCY) {
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
index 34c4498b800f..83b22ae9ae12 100644
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -59,23 +59,23 @@ struct posix_clock_operations {
 
 	int  (*clock_adjtime)(struct posix_clock *pc, struct timex *tx);
 
-	int  (*clock_gettime)(struct posix_clock *pc, struct timespec *ts);
+	int  (*clock_gettime)(struct posix_clock *pc, struct timespec64 *ts);
 
-	int  (*clock_getres) (struct posix_clock *pc, struct timespec *ts);
+	int  (*clock_getres) (struct posix_clock *pc, struct timespec64 *ts);
 
 	int  (*clock_settime)(struct posix_clock *pc,
-			      const struct timespec *ts);
+			      const struct timespec64 *ts);
 
 	int  (*timer_create) (struct posix_clock *pc, struct k_itimer *kit);
 
 	int  (*timer_delete) (struct posix_clock *pc, struct k_itimer *kit);
 
 	void (*timer_gettime)(struct posix_clock *pc,
-			      struct k_itimer *kit, struct itimerspec *tsp);
+			      struct k_itimer *kit, struct itimerspec64 *tsp);
 
 	int  (*timer_settime)(struct posix_clock *pc,
 			      struct k_itimer *kit, int flags,
-			      struct itimerspec *tsp, struct itimerspec *old);
+			      struct itimerspec64 *tsp, struct itimerspec64 *old);
 	/*
 	 * Optional character device methods:
 	 */
diff --git a/kernel/time/posix-clock.c b/kernel/time/posix-clock.c
index 9cff0ab82b63..e24008c098c6 100644
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -300,14 +300,17 @@ static int pc_clock_adjtime(clockid_t id, struct timex *tx)
 static int pc_clock_gettime(clockid_t id, struct timespec *ts)
 {
 	struct posix_clock_desc cd;
+	struct timespec64 ts64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.clock_gettime)
-		err = cd.clk->ops.clock_gettime(cd.clk, ts);
+	if (cd.clk->ops.clock_gettime) {
+		err = cd.clk->ops.clock_gettime(cd.clk, &ts64);
+		*ts = timespec64_to_timespec(ts64);
+	}
 	else
 		err = -EOPNOTSUPP;
 
@@ -319,14 +322,17 @@ static int pc_clock_gettime(clockid_t id, struct timespec *ts)
 static int pc_clock_getres(clockid_t id, struct timespec *ts)
 {
 	struct posix_clock_desc cd;
+	struct timespec64 ts64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.clock_getres)
-		err = cd.clk->ops.clock_getres(cd.clk, ts);
+	if (cd.clk->ops.clock_getres) {
+		err = cd.clk->ops.clock_getres(cd.clk, &ts64);
+		*ts = timespec64_to_timespec(ts64);
+	}
 	else
 		err = -EOPNOTSUPP;
 
@@ -337,6 +343,7 @@ static int pc_clock_getres(clockid_t id, struct timespec *ts)
 
 static int pc_clock_settime(clockid_t id, const struct timespec *ts)
 {
+	struct timespec64 ts64 = timespec_to_timespec64(*ts);
 	struct posix_clock_desc cd;
 	int err;
 
@@ -350,7 +357,7 @@ static int pc_clock_settime(clockid_t id, const struct timespec *ts)
 	}
 
 	if (cd.clk->ops.clock_settime)
-		err = cd.clk->ops.clock_settime(cd.clk, ts);
+		err = cd.clk->ops.clock_settime(cd.clk, &ts64);
 	else
 		err = -EOPNOTSUPP;
 out:
@@ -403,29 +410,36 @@ static void pc_timer_gettime(struct k_itimer *kit, struct itimerspec *ts)
 {
 	clockid_t id = kit->it_clock;
 	struct posix_clock_desc cd;
+	struct itimerspec64 ts64;
 
 	if (get_clock_desc(id, &cd))
 		return;
 
-	if (cd.clk->ops.timer_gettime)
-		cd.clk->ops.timer_gettime(cd.clk, kit, ts);
-
+	if (cd.clk->ops.timer_gettime) {
+		cd.clk->ops.timer_gettime(cd.clk, kit, &ts64);
+		*ts = itimerspec64_to_itimerspec(&ts64);
+	}
 	put_clock_desc(&cd);
 }
 
 static int pc_timer_settime(struct k_itimer *kit, int flags,
 			    struct itimerspec *ts, struct itimerspec *old)
 {
+	struct itimerspec64 ts64 = itimerspec_to_itimerspec64(ts);
 	clockid_t id = kit->it_clock;
 	struct posix_clock_desc cd;
+	struct itimerspec64 old64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.timer_settime)
-		err = cd.clk->ops.timer_settime(cd.clk, kit, flags, ts, old);
+	if (cd.clk->ops.timer_settime) {
+		err = cd.clk->ops.timer_settime(cd.clk, kit, flags, &ts64, &old64);
+		if (old)
+			*old = itimerspec64_to_itimerspec(&old64);
+	}
 	else
 		err = -EOPNOTSUPP;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 015/101] Input: ar1021_i2c - fix too long name in driver's device table

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 95123fc43560d6f4a60e74f72836e63cd8848f76 ]

The name field in structure i2c_device_id is 20 characters, and we expect
it to be NULL-terminated, however we are trying to stuff it with 21 bytes
and thus NULL-terminator is lost. This causes issues when one creates
device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C",
and automatic module loading by alias does not work as result.

The -I2C suffix in the device name is superfluous, we know what bus we are
dealing with, so let's drop it. Also, no other driver uses capitals, and
the manufacturer name is normally not included, except in very rare cases
of incompatible name collisions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211
Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen")
Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/touchscreen/ar1021_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index 71b5a634cf6d..e7bb155911d0 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -152,7 +152,7 @@ static int __maybe_unused ar1021_i2c_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(ar1021_i2c_pm, ar1021_i2c_suspend, ar1021_i2c_resume);
 
 static const struct i2c_device_id ar1021_i2c_id[] = {
-	{ "MICROCHIP_AR1021_I2C", 0 },
+	{ "ar1021", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 017/101] ACPI/processor: Fix error handling in __acpi_processor_start()

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit a5cbdf693a60d5b86d4d21dfedd90f17754eb273 ]

When acpi_install_notify_handler() fails the cooling device stays
registered and the sysfs files created via acpi_pss_perf_init() are
leaked and the function returns success.

Undo acpi_pss_perf_init() and return a proper error code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.695499645@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/processor_driver.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 11154a330f07..2c086859a0bd 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -259,6 +259,9 @@ static int __acpi_processor_start(struct acpi_device *device)
 	if (ACPI_SUCCESS(status))
 		return 0;
 
+	result = -ENODEV;
+	acpi_pss_perf_exit(pr, device);
+
 err_power_exit:
 	acpi_processor_power_exit(pr);
 	return result;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 019/101] cpufreq/sh: Replace racy task affinity logic

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 205dcc1ecbc566cbc20acf246e68de3b080b3ecf ]

The target() callback must run on the affected cpu. This is achieved by
temporarily setting the affinity of the calling thread to the requested CPU
and reset it to the original affinity afterwards.

That's racy vs. concurrent affinity settings for that thread resulting in
code executing on the wrong CPU.

Replace it by work_on_cpu(). All call pathes which invoke the callbacks are
already protected against CPU hotplug.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: linux-pm@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.958216363@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/cpufreq/sh-cpufreq.c | 45 ++++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
index 86628e22b2a3..719c3d9f07fb 100644
--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -30,54 +30,63 @@
 
 static DEFINE_PER_CPU(struct clk, sh_cpuclk);
 
+struct cpufreq_target {
+	struct cpufreq_policy	*policy;
+	unsigned int		freq;
+};
+
 static unsigned int sh_cpufreq_get(unsigned int cpu)
 {
 	return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
 }
 
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
+static long __sh_cpufreq_target(void *arg)
 {
-	unsigned int cpu = policy->cpu;
+	struct cpufreq_target *target = arg;
+	struct cpufreq_policy *policy = target->policy;
+	int cpu = policy->cpu;
 	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-	cpumask_t cpus_allowed;
 	struct cpufreq_freqs freqs;
 	struct device *dev;
 	long freq;
 
-	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	BUG_ON(smp_processor_id() != cpu);
+	if (smp_processor_id() != cpu)
+		return -ENODEV;
 
 	dev = get_cpu_device(cpu);
 
 	/* Convert target_freq from kHz to Hz */
-	freq = clk_round_rate(cpuclk, target_freq * 1000);
+	freq = clk_round_rate(cpuclk, target->freq * 1000);
 
 	if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
 		return -EINVAL;
 
-	dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
+	dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
 
 	freqs.old	= sh_cpufreq_get(cpu);
 	freqs.new	= (freq + 500) / 1000;
 	freqs.flags	= 0;
 
-	cpufreq_freq_transition_begin(policy, &freqs);
-	set_cpus_allowed_ptr(current, &cpus_allowed);
+	cpufreq_freq_transition_begin(target->policy, &freqs);
 	clk_set_rate(cpuclk, freq);
-	cpufreq_freq_transition_end(policy, &freqs, 0);
+	cpufreq_freq_transition_end(target->policy, &freqs, 0);
 
 	dev_dbg(dev, "set frequency %lu Hz\n", freq);
-
 	return 0;
 }
 
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int sh_cpufreq_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	struct cpufreq_target data = { .policy = policy, .freq = target_freq };
+
+	return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
+}
+
 static int sh_cpufreq_verify(struct cpufreq_policy *policy)
 {
 	struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 018/101] ACPI/processor: Replace racy task affinity logic

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 8153f9ac43897f9f4786b30badc134fcc1a4fb11 ]

acpi_processor_get_throttling() requires to invoke the getter function on
the target CPU. This is achieved by temporarily setting the affinity of the
calling user space thread to the requested CPU and reset it to the original
affinity afterwards.

That's racy vs. CPU hotplug and concurrent affinity settings for that
thread resulting in code executing on the wrong CPU and overwriting the
new affinity setting.

acpi_processor_get_throttling() is invoked in two ways:

1) The CPU online callback, which is already running on the target CPU and
   obviously protected against hotplug and not affected by affinity
   settings.

2) The ACPI driver probe function, which is not protected against hotplug
   during modprobe.

Switch it over to work_on_cpu() and protect the probe function against CPU
hotplug.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/processor_driver.c     |  7 ++++-
 drivers/acpi/processor_throttling.c | 62 +++++++++++++++++++++----------------
 2 files changed, 42 insertions(+), 27 deletions(-)

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 2c086859a0bd..c9bf74982688 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -270,11 +270,16 @@ static int __acpi_processor_start(struct acpi_device *device)
 static int acpi_processor_start(struct device *dev)
 {
 	struct acpi_device *device = ACPI_COMPANION(dev);
+	int ret;
 
 	if (!device)
 		return -ENODEV;
 
-	return __acpi_processor_start(device);
+	/* Protect against concurrent CPU hotplug operations */
+	get_online_cpus();
+	ret = __acpi_processor_start(device);
+	put_online_cpus();
+	return ret;
 }
 
 static int acpi_processor_stop(struct device *dev)
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index c72e64893d03..93d72413d844 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -62,8 +62,8 @@ struct acpi_processor_throttling_arg {
 #define THROTTLING_POSTCHANGE      (2)
 
 static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr,
-						int state, bool force);
+static int __acpi_processor_set_throttling(struct acpi_processor *pr,
+					   int state, bool force, bool direct);
 
 static int acpi_processor_update_tsd_coord(void)
 {
@@ -891,7 +891,8 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				"Invalid throttling state, reset\n"));
 			state = 0;
-			ret = acpi_processor_set_throttling(pr, state, true);
+			ret = __acpi_processor_set_throttling(pr, state, true,
+							      true);
 			if (ret)
 				return ret;
 		}
@@ -901,36 +902,31 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	return 0;
 }
 
-static int acpi_processor_get_throttling(struct acpi_processor *pr)
+static long __acpi_processor_get_throttling(void *data)
 {
-	cpumask_var_t saved_mask;
-	int ret;
+	struct acpi_processor *pr = data;
+
+	return pr->throttling.acpi_processor_get_throttling(pr);
+}
 
+static int acpi_processor_get_throttling(struct acpi_processor *pr)
+{
 	if (!pr)
 		return -EINVAL;
 
 	if (!pr->flags.throttling)
 		return -ENODEV;
 
-	if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL))
-		return -ENOMEM;
-
 	/*
-	 * Migrate task to the cpu pointed by pr.
+	 * This is either called from the CPU hotplug callback of
+	 * processor_driver or via the ACPI probe function. In the latter
+	 * case the CPU is not guaranteed to be online. Both call sites are
+	 * protected against CPU hotplug.
 	 */
-	cpumask_copy(saved_mask, &current->cpus_allowed);
-	/* FIXME: use work_on_cpu() */
-	if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) {
-		/* Can't migrate to the target pr->id CPU. Exit */
-		free_cpumask_var(saved_mask);
+	if (!cpu_online(pr->id))
 		return -ENODEV;
-	}
-	ret = pr->throttling.acpi_processor_get_throttling(pr);
-	/* restore the previous state */
-	set_cpus_allowed_ptr(current, saved_mask);
-	free_cpumask_var(saved_mask);
 
-	return ret;
+	return work_on_cpu(pr->id, __acpi_processor_get_throttling, pr);
 }
 
 static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
@@ -1080,8 +1076,15 @@ static long acpi_processor_throttling_fn(void *data)
 			arg->target_state, arg->force);
 }
 
-int acpi_processor_set_throttling(struct acpi_processor *pr,
-						int state, bool force)
+static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct)
+{
+	if (direct)
+		return fn(arg);
+	return work_on_cpu(cpu, fn, arg);
+}
+
+static int __acpi_processor_set_throttling(struct acpi_processor *pr,
+					   int state, bool force, bool direct)
 {
 	int ret = 0;
 	unsigned int i;
@@ -1130,7 +1133,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr,
 		arg.pr = pr;
 		arg.target_state = state;
 		arg.force = force;
-		ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, &arg);
+		ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, &arg,
+				  direct);
 	} else {
 		/*
 		 * When the T-state coordination is SW_ALL or HW_ALL,
@@ -1163,8 +1167,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr,
 			arg.pr = match_pr;
 			arg.target_state = state;
 			arg.force = force;
-			ret = work_on_cpu(pr->id, acpi_processor_throttling_fn,
-				&arg);
+			ret = call_on_cpu(pr->id, acpi_processor_throttling_fn,
+					  &arg, direct);
 		}
 	}
 	/*
@@ -1182,6 +1186,12 @@ int acpi_processor_set_throttling(struct acpi_processor *pr,
 	return ret;
 }
 
+int acpi_processor_set_throttling(struct acpi_processor *pr, int state,
+				  bool force)
+{
+	return __acpi_processor_set_throttling(pr, state, force, false);
+}
+
 int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 {
 	int result = 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 021/101] i2c: i2c-scmi: add a MS HID

[Sasha Levin]

From: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>

[ Upstream commit e058e7a4bc89104540a8a303682248614b5df6f1 ]

Description of the problem:
 - i2c-scmi driver contains only two identifiers "SMBUS01" and "SMBUSIBM";
 - the fist HID (SMBUS01) is clearly defined in "SMBus Control Method
   Interface Specification, version 1.0": "Each device must specify
   'SMBUS01' as its _HID and use a unique _UID value";
 - unfortunately, BIOS vendors (like AMI) seem to ignore this requirement
   and implement "SMB0001" HID instead of "SMBUS01";
 - I speculate that they do this because only "SMB0001" is hard coded in
   Windows SMBus driver produced by Microsoft.

This leads to following situation:
 - SMBus works out of box in Windows but not in Linux;
 - board vendors are forced to add correct "SMBUS01" HID to BIOS to make
   SMBus work in Linux. Moreover the same board vendors complain that
   tools (3-rd party ASL compiler) do not like the "SMBUS01" identifier
   and produce errors.  So they need to constantly patch the compiler for
   each new version of BIOS.

As it is very unlikely that BIOS vendors implement a correct HID in
future, I would propose to consider whether it is possible to work around
the problem by adding MS HID to the Linux i2c-scmi driver.

v2: move the definition of the new HID to the driver itself.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Signed-off-by: Michael Brunner <Michael.Brunner@kontron.com>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/i2c/busses/i2c-scmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index dfc98df7b1b6..7aa7b9cb6203 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -18,6 +18,9 @@
 #define ACPI_SMBUS_HC_CLASS		"smbus"
 #define ACPI_SMBUS_HC_DEVICE_NAME	"cmi"
 
+/* SMBUS HID definition as supported by Microsoft Windows */
+#define ACPI_SMBUS_MS_HID		"SMB0001"
+
 ACPI_MODULE_NAME("smbus_cmi");
 
 struct smbus_methods_t {
@@ -51,6 +54,7 @@ static const struct smbus_methods_t ibm_smbus_methods = {
 static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
 	{"SMBUS01", (kernel_ulong_t)&smbus_methods},
 	{ACPI_SMBUS_IBM_HID, (kernel_ulong_t)&ibm_smbus_methods},
+	{ACPI_SMBUS_MS_HID, (kernel_ulong_t)&smbus_methods},
 	{"", 0}
 };
 MODULE_DEVICE_TABLE(acpi, acpi_smbus_cmi_ids);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 020/101] genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 ]

When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction
flags get filled with the trigger type from the irq_data:

        if (!(new->flags & IRQF_TRIGGER_MASK))
                new->flags |= irqd_get_trigger_type(&desc->irq_data);

On the first setup_irq() the trigger type in irq_data is NONE when the
above code executes, then the irq is started up for the first time and
then the actual trigger type gets established, but that's too late to fix
up new->flags.

When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE
its irqaction's triggertype gets set to the actual trigger type and the
following check fails:

        if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))

Resulting in the request_irq failing with -EBUSY even though both
users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE

Fix this by comparing the new irqaction's trigger type to the trigger type
stored in the irq_data which correctly reflects the actual trigger type
being used for the irq.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/irq/manage.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index a079ed14f230..4889a8ab77ce 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1189,8 +1189,10 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 		 * set the trigger type must match. Also all must
 		 * agree on ONESHOT.
 		 */
+		unsigned int oldtype = irqd_get_trigger_type(&desc->irq_data);
+
 		if (!((old->flags & new->flags) & IRQF_SHARED) ||
-		    ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) ||
+		    (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
 		    ((old->flags ^ new->flags) & IRQF_ONESHOT))
 			goto mismatch;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 023/101] [media] media/dvb-core: Race condition when writing to CAM

[Sasha Levin]

From: Jasmin J <jasmin@anw.at>

[ Upstream commit e7080d4471d805d921a9ea21b32f911a91e248cb ]

It started with a sporadic message in syslog: "CAM tried to send a
buffer larger than the ecount size" This message is not the fault
itself, but a consecutive fault, after a read error from the CAM. This
happens only on several CAMs, several hardware, and of course sporadic.

It is a consecutive fault, if the last read from the CAM did fail. I
guess this will not happen on all CAMs, but at least it did on mine.
There was a write error to the CAM and during the re-initialization
procedure, the CAM finished the last read, although it got a RS.

The write error to the CAM happened because a race condition between HC
write, checking DA and FR.

This patch added an additional check for DA(RE), just after checking FR.
It is important to read the CAMs status register again, to give the CAM
the necessary time for a proper reaction to HC. Please note the
description within the source code (patch below).

[mchehab@s-opensource.com: make checkpatch happy]

Signed-off-by: Jasmin jessich <jasmin@anw.at>
Tested-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/dvb-core/dvb_ca_en50221.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index fb66184dc9b6..77cf211e842e 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -750,6 +750,29 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b
 		goto exit;
 	}
 
+	/*
+	 * It may need some time for the CAM to settle down, or there might
+	 * be a race condition between the CAM, writing HC and our last
+	 * check for DA. This happens, if the CAM asserts DA, just after
+	 * checking DA before we are setting HC. In this case it might be
+	 * a bug in the CAM to keep the FR bit, the lower layer/HW
+	 * communication requires a longer timeout or the CAM needs more
+	 * time internally. But this happens in reality!
+	 * We need to read the status from the HW again and do the same
+	 * we did for the previous check for DA
+	 */
+	status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
+	if (status < 0)
+		goto exit;
+
+	if (status & (STATUSREG_DA | STATUSREG_RE)) {
+		if (status & STATUSREG_DA)
+			dvb_ca_en50221_thread_wakeup(ca);
+
+		status = -EAGAIN;
+		goto exit;
+	}
+
 	/* send the amount of data */
 	if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0)
 		goto exit;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 022/101] net: ipv6: send unsolicited NA on admin up

[Sasha Levin]

From: David Ahern <dsa@cumulusnetworks.com>

[ Upstream commit 4a6e3c5def13c91adf2acc613837001f09af3baa ]

ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is
set to 1, gratuitous arp requests are sent when the device is brought up.
The same is expected when ndisc_notify is set to 1 (per ndisc_notify in
Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP
event; add it.

Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/ndisc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 84afb9a77278..55810e4899f1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1686,6 +1686,8 @@ static int ndisc_netdev_event(struct notifier_block *this, unsigned long event,
 	case NETDEV_CHANGEADDR:
 		neigh_changeaddr(&nd_tbl, dev);
 		fib6_run_gc(0, net, false);
+		/* fallthrough */
+	case NETDEV_UP:
 		idev = in6_dev_get(dev);
 		if (!idev)
 			break;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 024/101] spi: dw: Disable clock after unregistering the host

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 400c18e3dc86e04ef5afec9b86a8586ca629b9e9 ]

The dw_mmio driver disables the block clock before unregistering
the host. The code unregistering the host may access the SPI block
registers. If register access happens with block clock disabled,
this may lead to a bus hang. Disable the clock after unregistering
the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-dw-mmio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index a6d7029a85ac..581df3ebfc88 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -120,8 +120,8 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
 {
 	struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(dwsmmio->clk);
 	dw_spi_remove_host(&dwsmmio->dws);
+	clk_disable_unprepare(dwsmmio->clk);
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 025/101] ath: Fix updating radar flags for coutry code India

[Sasha Levin]

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/regd.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 06ea6cc9e30a..62077bda8dde 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -254,8 +254,12 @@ bool ath_is_49ghz_allowed(u16 regdomain)
 EXPORT_SYMBOL(ath_is_49ghz_allowed);
 
 /* Frequency is one where radar detection is required */
-static bool ath_is_radar_freq(u16 center_freq)
+static bool ath_is_radar_freq(u16 center_freq,
+			      struct ath_regulatory *reg)
+
 {
+	if (reg->country_code == CTRY_INDIA)
+		return (center_freq >= 5500 && center_freq <= 5700);
 	return (center_freq >= 5260 && center_freq <= 5700);
 }
 
@@ -306,7 +310,7 @@ __ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
 				enum nl80211_reg_initiator initiator,
 				struct ieee80211_channel *ch)
 {
-	if (ath_is_radar_freq(ch->center_freq) ||
+	if (ath_is_radar_freq(ch->center_freq, reg) ||
 	    (ch->flags & IEEE80211_CHAN_RADAR))
 		return;
 
@@ -395,8 +399,9 @@ ath_reg_apply_ir_flags(struct wiphy *wiphy,
 	}
 }
 
-/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
-static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
+/* Always apply Radar/DFS rules on freq range 5500 MHz - 5700 MHz */
+static void ath_reg_apply_radar_flags(struct wiphy *wiphy,
+				      struct ath_regulatory *reg)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -409,7 +414,7 @@ static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
 
 	for (i = 0; i < sband->n_channels; i++) {
 		ch = &sband->channels[i];
-		if (!ath_is_radar_freq(ch->center_freq))
+		if (!ath_is_radar_freq(ch->center_freq, reg))
 			continue;
 		/* We always enable radar detection/DFS on this
 		 * frequency range. Additionally we also apply on
@@ -505,7 +510,7 @@ void ath_reg_notifier_apply(struct wiphy *wiphy,
 	struct ath_common *common = container_of(reg, struct ath_common,
 						 regulatory);
 	/* We always apply this */
-	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy, reg);
 
 	/*
 	 * This would happen when we have sent a custom regulatory request
@@ -653,7 +658,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 	}
 
 	wiphy_apply_custom_regulatory(wiphy, regd);
-	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy, reg);
 	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 026/101] clk: ns2: Correct SDIO bits

[Sasha Levin]

From: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>

[ Upstream commit 8973aa4aecac223548366ca81818309a0f0efa6d ]

Corrected the bits for power and iso.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/bcm/clk-ns2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-ns2.c b/drivers/clk/bcm/clk-ns2.c
index a564e9248814..adc14145861a 100644
--- a/drivers/clk/bcm/clk-ns2.c
+++ b/drivers/clk/bcm/clk-ns2.c
@@ -103,7 +103,7 @@ CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
 
 static const struct iproc_pll_ctrl genpll_sw = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
-	.aon = AON_VAL(0x0, 2, 9, 8),
+	.aon = AON_VAL(0x0, 1, 11, 10),
 	.reset = RESET_VAL(0x4, 2, 1),
 	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
 	.ndiv_int = REG_VAL(0x8, 4, 10),
-- 
2.14.1

[PATCH AUTOSEL for 4.4 027/101] scsi: virtio_scsi: Always try to read VPD pages

[Sasha Levin]

From: David Gibson <david@gibson.dropbear.id.au>

[ Upstream commit 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 ]

Passed through SCSI targets may have transfer limits which come from the
host SCSI controller or something on the host side other than the target
itself.

To make this work properly, the hypervisor can adjust the target's VPD
information to advertise these limits.  But for that to work, the guest
has to look at the VPD pages, which we won't do by default if it is an
SPC-2 device, even if it does actually support it.

This adds a workaround to address this, forcing devices attached to a
virtio-scsi controller to always check the VPD pages.  This is modelled
on a similar workaround for the storvsc (Hyper-V) SCSI controller,
although that exists for slightly different reasons.

A specific case which causes this is a volume from IBM's IPR RAID
controller (which presents as an SPC-2 device, although it does support
VPD) passed through with qemu's 'scsi-block' device.

[mkp: fixed typo]

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/virtio_scsi.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 03a2aadf0d3c..578fae4d474f 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -28,6 +28,7 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_tcq.h>
+#include <scsi/scsi_devinfo.h>
 #include <linux/seqlock.h>
 
 #define VIRTIO_SCSI_MEMPOOL_SZ 64
@@ -704,6 +705,28 @@ static int virtscsi_device_reset(struct scsi_cmnd *sc)
 	return virtscsi_tmf(vscsi, cmd);
 }
 
+static int virtscsi_device_alloc(struct scsi_device *sdevice)
+{
+	/*
+	 * Passed through SCSI targets (e.g. with qemu's 'scsi-block')
+	 * may have transfer limits which come from the host SCSI
+	 * controller or something on the host side other than the
+	 * target itself.
+	 *
+	 * To make this work properly, the hypervisor can adjust the
+	 * target's VPD information to advertise these limits.  But
+	 * for that to work, the guest has to look at the VPD pages,
+	 * which we won't do by default if it is an SPC-2 device, even
+	 * if it does actually support it.
+	 *
+	 * So, set the blist to always try to read the VPD pages.
+	 */
+	sdevice->sdev_bflags = BLIST_TRY_VPD_PAGES;
+
+	return 0;
+}
+
+
 /**
  * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth
  * @sdev:	Virtscsi target whose queue depth to change
@@ -775,6 +798,7 @@ static struct scsi_host_template virtscsi_host_template_single = {
 	.change_queue_depth = virtscsi_change_queue_depth,
 	.eh_abort_handler = virtscsi_abort,
 	.eh_device_reset_handler = virtscsi_device_reset,
+	.slave_alloc = virtscsi_device_alloc,
 
 	.can_queue = 1024,
 	.dma_boundary = UINT_MAX,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 030/101] iommu/omap: Register driver before setting IOMMU ops

[Sasha Levin]

From: Suman Anna <s-anna@ti.com>

[ Upstream commit abaa7e5b054aae567861628b74dbc7fbf8ed79e8 ]

Move the registration of the OMAP IOMMU platform driver before
setting the IOMMU callbacks on the platform bus. This causes
the IOMMU devices to be probed first before the .add_device()
callback is invoked for all registered devices, and allows
the iommu_group support to be added to the OMAP IOMMU driver.

While at this, also check for the return status from bus_set_iommu.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/omap-iommu.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 3dc5b65f3990..b98d38f95237 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1295,6 +1295,7 @@ static int __init omap_iommu_init(void)
 	const unsigned long flags = SLAB_HWCACHE_ALIGN;
 	size_t align = 1 << 10; /* L2 pagetable alignement */
 	struct device_node *np;
+	int ret;
 
 	np = of_find_matching_node(NULL, omap_iommu_of_match);
 	if (!np)
@@ -1308,11 +1309,25 @@ static int __init omap_iommu_init(void)
 		return -ENOMEM;
 	iopte_cachep = p;
 
-	bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
-
 	omap_iommu_debugfs_init();
 
-	return platform_driver_register(&omap_iommu_driver);
+	ret = platform_driver_register(&omap_iommu_driver);
+	if (ret) {
+		pr_err("%s: failed to register driver\n", __func__);
+		goto fail_driver;
+	}
+
+	ret = bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
+	if (ret)
+		goto fail_bus;
+
+	return 0;
+
+fail_bus:
+	platform_driver_unregister(&omap_iommu_driver);
+fail_driver:
+	kmem_cache_destroy(iopte_cachep);
+	return ret;
 }
 subsys_initcall(omap_iommu_init);
 /* must be ready before omap3isp is probed */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 028/101] KVM: PPC: Book3S PR: Exit KVM on failed mapping

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit bd9166ffe624000140fc6b606b256df01fc0d060 ]

At the moment kvmppc_mmu_map_page() returns -1 if
mmu_hash_ops.hpte_insert() fails for any reason so the page fault handler
resumes the guest and it faults on the same address again.

This adds distinction to kvmppc_mmu_map_page() to return -EIO if
mmu_hash_ops.hpte_insert() failed for a reason other than full pteg.
At the moment only pSeries_lpar_hpte_insert() returns -2 if
plpar_pte_enter() failed with a code other than H_PTEG_FULL.
Other mmu_hash_ops.hpte_insert() instances can only fail with
-1 "full pteg".

With this change, if PR KVM fails to update HPT, it can signal
the userspace about this instead of returning to guest and having
the very same page fault over and over again.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kvm/book3s_64_mmu_host.c | 5 ++++-
 arch/powerpc/kvm/book3s_pr.c          | 6 +++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 79ad35abd196..ddec22828673 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -177,12 +177,15 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte,
 	ret = ppc_md.hpte_insert(hpteg, vpn, hpaddr, rflags, vflags,
 				 hpsize, hpsize, MMU_SEGSIZE_256M);
 
-	if (ret < 0) {
+	if (ret == -1) {
 		/* If we couldn't map a primary PTE, try a secondary */
 		hash = ~hash;
 		vflags ^= HPTE_V_SECONDARY;
 		attempt++;
 		goto map_again;
+	} else if (ret < 0) {
+		r = -EIO;
+		goto out_unlock;
 	} else {
 		trace_kvm_book3s_64_mmu_map(rflags, hpteg,
 					    vpn, hpaddr, orig_pte);
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 64891b081ad5..81313844d81c 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -625,7 +625,11 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			kvmppc_mmu_unmap_page(vcpu, &pte);
 		}
 		/* The guest's PTE is not mapped yet. Map on the host */
-		kvmppc_mmu_map_page(vcpu, &pte, iswrite);
+		if (kvmppc_mmu_map_page(vcpu, &pte, iswrite) == -EIO) {
+			/* Exit KVM if mapping failed */
+			run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+			return RESUME_HOST;
+		}
 		if (data)
 			vcpu->stat.sp_storage++;
 		else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
-- 
2.14.1

[PATCH AUTOSEL for 4.4 029/101] ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER

[Sasha Levin]

From: Abel Vesa <abelvesa@linux.com>

[ Upstream commit 6f05d0761af612e04572ba4d65b4c0274a88444f ]

The support for dynamic ftrace with CONFIG_DEBUG_RODATA involves
overriding the weak arch_ftrace_update_code() with a variant which makes
the kernel text writable around the patching.

This override was however added under the CONFIG_OLD_MCOUNT ifdef, and
CONFIG_OLD_MCOUNT is only enabled if frame pointers are enabled.

This leads to non-functional dynamic ftrace (ftrace triggers a
WARN_ON()) when CONFIG_DEBUG_RODATA is enabled and CONFIG_FRAME_POINTER
is not.

Move the override out of that ifdef and into the CONFIG_DYNAMIC_FTRACE
ifdef where it belongs.

Fixes: 80d6b0c2eed2a ("ARM: mm: allow text and rodata sections to be read-only")
Suggested-by: Nicolai Stange <nicstange@gmail.com>
Suggested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Abel Vesa <abelvesa@gmail.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/kernel/ftrace.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 709ee1d6d4df..faa9a905826e 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -29,11 +29,6 @@
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_OLD_MCOUNT
-#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
-#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
-
-#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
 
 static int __ftrace_modify_code(void *data)
 {
@@ -51,6 +46,12 @@ void arch_ftrace_update_code(int command)
 	stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
+#ifdef CONFIG_OLD_MCOUNT
+#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
+#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
+
+#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
+
 static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
 	return rec->arch.old_mcount ? OLD_NOP : NOP;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 032/101] NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()

[Sasha Levin]

From: Benjamin Coddington <bcodding@redhat.com>

[ Upstream commit 43b7d964ed30dbca5c83c90cb010985b429ec4f9 ]

Commit a7d42ddb3099727f58366fa006f850a219cce6c8 ("nfs: add mirroring
support to pgio layer") moved pg_cleanup out of the path when there was
non-sequental I/O that needed to be flushed.  The result is that for
layouts that have more than one layout segment per file, the pg_lseg is not
cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in
pnfs_generic_pg_test since the pg_lseg will be pointing to that
previously-flushed layout segment.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfs/pagelist.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 8ebfdd00044b..4bdc2fc86280 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1273,8 +1273,10 @@ void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *desc, pgoff_t index)
 		mirror = &desc->pg_mirrors[midx];
 		if (!list_empty(&mirror->pg_list)) {
 			prev = nfs_list_entry(mirror->pg_list.prev);
-			if (index != prev->wb_index + 1)
-				nfs_pageio_complete_mirror(desc, midx);
+			if (index != prev->wb_index + 1) {
+				nfs_pageio_complete(desc);
+				break;
+			}
 		}
 	}
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 031/101] md/raid10: wait up frozen array in handle_write_completed

[Sasha Levin]

From: Guoqing Jiang <gqjiang@suse.com>

[ Upstream commit cf25ae78fc50010f66b9be945017796da34c434d ]

Since nr_queued is changed, we need to call wake_up here
if the array is already frozen and waiting for condition
"nr_pending == nr_queued + extra" to be true.

And commit 824e47daddbf ("RAID1: avoid unnecessary spin
locks in I/O barrier code") which has already added the
wake_up for raid1.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid10.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index a8a86d450d76..05548af8df6f 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2698,6 +2698,11 @@ static void handle_write_completed(struct r10conf *conf, struct r10bio *r10_bio)
 			list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
 			conf->nr_queued++;
 			spin_unlock_irq(&conf->device_lock);
+			/*
+			 * In case freeze_array() is waiting for condition
+			 * nr_pending == nr_queued + extra to be true.
+			 */
+			wake_up(&conf->wait_barrier);
 			md_wakeup_thread(conf->mddev->thread);
 		} else {
 			if (test_bit(R10BIO_WriteError,
-- 
2.14.1

[PATCH AUTOSEL for 4.4 034/101] e1000e: fix timing for 82579 Gigabit Ethernet controller

[Sasha Levin]

From: Bernd Faust <berndfaust@gmail.com>

[ Upstream commit 5313eeccd2d7f486be4e5c7560e3e2be239ec8f7 ]

After an upgrade to Linux kernel v4.x the hardware timestamps of the
82579 Gigabit Ethernet Controller are different than expected.
The values that are being read are almost four times as big as before
the kernel upgrade.

The difference is that after the upgrade the driver sets the clock
frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel
confirmed that the correct frequency for this network adapter is 96MHz.

Signed-off-by: Bernd Faust <berndfaust@gmail.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 5205f1ebe381..e356e9187e84 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3526,6 +3526,12 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
 
 	switch (hw->mac.type) {
 	case e1000_pch2lan:
+		/* Stable 96MHz frequency */
+		incperiod = INCPERIOD_96MHz;
+		incvalue = INCVALUE_96MHz;
+		shift = INCVALUE_SHIFT_96MHz;
+		adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+		break;
 	case e1000_pch_lpt:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 96MHz frequency */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 033/101] tcp: remove poll() flakes with FastOpen

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0f9fa831aecfc297b7b45d4f046759bcefcf87f0 ]

When using TCP FastOpen for an active session, we send one wakeup event
from tcp_finish_connect(), right before the data eventually contained in
the received SYNACK is queued to sk->sk_receive_queue.

This means that depending on machine load or luck, poll() users
might receive POLLOUT events instead of POLLIN|POLLOUT

To fix this, we need to move the call to sk->sk_state_change()
after the (optional) call to tcp_rcv_fastopen_synack()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv4/tcp_input.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 71290fb7d500..75433ed6714b 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5464,10 +5464,6 @@ void tcp_finish_connect(struct sock *sk, struct sk_buff *skb)
 	else
 		tp->pred_flags = 0;
 
-	if (!sock_flag(sk, SOCK_DEAD)) {
-		sk->sk_state_change(sk);
-		sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
-	}
 }
 
 static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack,
@@ -5531,6 +5527,7 @@ static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb,
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_fastopen_cookie foc = { .len = -1 };
 	int saved_clamp = tp->rx_opt.mss_clamp;
+	bool fastopen_fail;
 
 	tcp_parse_options(skb, &tp->rx_opt, 0, &foc);
 	if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr)
@@ -5633,10 +5630,15 @@ static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb,
 
 		tcp_finish_connect(sk, skb);
 
-		if ((tp->syn_fastopen || tp->syn_data) &&
-		    tcp_rcv_fastopen_synack(sk, skb, &foc))
-			return -1;
+		fastopen_fail = (tp->syn_fastopen || tp->syn_data) &&
+				tcp_rcv_fastopen_synack(sk, skb, &foc);
 
+		if (!sock_flag(sk, SOCK_DEAD)) {
+			sk->sk_state_change(sk);
+			sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
+		}
+		if (fastopen_fail)
+			return -1;
 		if (sk->sk_write_pending ||
 		    icsk->icsk_accept_queue.rskq_defer_accept ||
 		    icsk->icsk_ack.pingpong) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 035/101] ALSA: hda - Fix headset microphone detection for ASUS N551 and N751

[Sasha Levin]

From: Mikhail Paulyshka <me@mixaill.tk>

[ Upstream commit fc7438b1eb12b6c93d7b7a62423779eb5dfc673c ]

Headset microphone does not work out of the box on ASUS Nx51
laptops. This patch fixes it.

Patch tested on Asus N551 laptop. Asus N751 part is not tested, but
according to [1] this laptop uses the same audiosystem.

1. https://bugzilla.kernel.org/show_bug.cgi?id=117781

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437
Signed-off-by: Mikhail Paulyshka <me@mixaill.tk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/pci/hda/patch_realtek.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b302d056e5d3..777db644e735 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6701,6 +6701,7 @@ enum {
 	ALC668_FIXUP_DELL_DISABLE_AAMIX,
 	ALC668_FIXUP_DELL_XPS13,
 	ALC662_FIXUP_ASUS_Nx50,
+	ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	ALC668_FIXUP_ASUS_Nx51,
 };
 
@@ -6948,14 +6949,21 @@ static const struct hda_fixup alc662_fixups[] = {
 		.chained = true,
 		.chain_id = ALC662_FIXUP_BASS_1A
 	},
+	[ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_headset_mode_alc668,
+		.chain_id = ALC662_FIXUP_BASS_CHMAP
+	},
 	[ALC668_FIXUP_ASUS_Nx51] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
-			{0x1a, 0x90170151}, /* bass speaker */
+			{ 0x19, 0x03a1913d }, /* use as headphone mic, without its own jack detect */
+			{ 0x1a, 0x90170151 }, /* bass speaker */
+			{ 0x1b, 0x03a1113c }, /* use as headset mic, without its own jack detect */
 			{}
 		},
 		.chained = true,
-		.chain_id = ALC662_FIXUP_BASS_CHMAP,
+		.chain_id = ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	},
 };
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 036/101] IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow

[Sasha Levin]

From: Feras Daoud <ferasda@mellanox.com>

[ Upstream commit 3e31a490e01a6e67cbe9f6e1df2f3ff0fbf48972 ]

Before calling ipoib_stop, rtnl_lock should be taken, then
the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP
flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY
is set.

On the other hand, the flow of multicast join task initializes
a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls
ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this
call returns EINVAL without setting the mcast completion and
leads to a deadlock.

    ipoib_stop                          |
        |                               |
    clear_bit(IPOIB_FLAG_ADMIN_UP)      |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join_task
        |                               |
        |                       spin_lock_irq(lock)
        |                               |
        |                       init_completion(mcast)
        |                               |
        |                       set_bit(IPOIB_MCAST_FLAG_BUSY)
        |                               |
        |                       Context Switch
        |                               |
    clear_bit(IPOIB_FLAG_OPER_UP)       |
        |                               |
    spin_lock_irqsave(lock)             |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join
        |                       return (-EINVAL)
        |                               |
        |                       spin_unlock_irq(lock)
        |                               |
        |                       Context Switch
        |                               |
    ipoib_mcast_dev_flush               |
    wait_for_completion(mcast)          |

ipoib_stop will wait for mcast completion for ever, and will
not release the rtnl_lock. As a result panic occurs with the
following trace:

    [13441.639268] Call Trace:
    [13441.640150]  [<ffffffff8168b579>] schedule+0x29/0x70
    [13441.641038]  [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
    [13441.641914]  [<ffffffff810bc017>] ? complete+0x47/0x50
    [13441.642765]  [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200
    [13441.643580]  [<ffffffff8168b956>] wait_for_completion+0x116/0x170
    [13441.644434]  [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
    [13441.645293]  [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib]
    [13441.646159]  [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib]
    [13441.647013]  [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib]

Fixes: 08bc327629cb ("IB/ipoib: fix for rare multicast join race condition")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 5580ab0b5781..682a69daac5d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -473,6 +473,9 @@ static int ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast)
 	    !test_bit(IPOIB_FLAG_OPER_UP, &priv->flags))
 		return -EINVAL;
 
+	init_completion(&mcast->done);
+	set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+
 	ipoib_dbg_mcast(priv, "joining MGID %pI6\n", mcast->mcmember.mgid.raw);
 
 	rec.mgid     = mcast->mcmember.mgid;
@@ -631,8 +634,6 @@ void ipoib_mcast_join_task(struct work_struct *work)
 			if (mcast->backoff == 1 ||
 			    time_after_eq(jiffies, mcast->delay_until)) {
 				/* Found the next unjoined group */
-				init_completion(&mcast->done);
-				set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
 				if (ipoib_mcast_join(dev, mcast)) {
 					spin_unlock_irq(&priv->lock);
 					return;
@@ -652,11 +653,9 @@ void ipoib_mcast_join_task(struct work_struct *work)
 		queue_delayed_work(priv->wq, &priv->mcast_task,
 				   delay_until - jiffies);
 	}
-	if (mcast) {
-		init_completion(&mcast->done);
-		set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+	if (mcast)
 		ipoib_mcast_join(dev, mcast);
-	}
+
 	spin_unlock_irq(&priv->lock);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 037/101] IB/ipoib: Update broadcast object if PKey value was changed in index 0

[Sasha Levin]

From: Feras Daoud <ferasda@mellanox.com>

[ Upstream commit 9a9b8112699d78e7f317019b37f377e90023f3ed ]

Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.

For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.

Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_ib.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index d3f0a384faad..f6b06729f4ea 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -945,6 +945,19 @@ static inline int update_parent_pkey(struct ipoib_dev_priv *priv)
 		 */
 		priv->dev->broadcast[8] = priv->pkey >> 8;
 		priv->dev->broadcast[9] = priv->pkey & 0xff;
+
+		/*
+		 * Update the broadcast address in the priv->broadcast object,
+		 * in case it already exists, otherwise no one will do that.
+		 */
+		if (priv->broadcast) {
+			spin_lock_irq(&priv->lock);
+			memcpy(priv->broadcast->mcmember.mgid.raw,
+			       priv->dev->broadcast + 4,
+			sizeof(union ib_gid));
+			spin_unlock_irq(&priv->lock);
+		}
+
 		return 0;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 039/101] IB/mlx4: Take write semaphore when changing the vma struct

[Sasha Levin]

From: Maor Gottlieb <maorg@mellanox.com>

[ Upstream commit 22c3653d04bd0c67b75e99d85e0c0bdf83947df5 ]

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/mlx4/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 5a2a0b5db938..9119e0b3c2b8 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1041,7 +1041,7 @@ static void mlx4_ib_disassociate_ucontext(struct ib_ucontext *ibcontext)
 	/* need to protect from a race on closing the vma as part of
 	 * mlx4_ib_vma_close().
 	 */
-	down_read(&owning_mm->mmap_sem);
+	down_write(&owning_mm->mmap_sem);
 	for (i = 0; i < HW_BAR_COUNT; i++) {
 		vma = context->hw_bar_info[i].vma;
 		if (!vma)
@@ -1059,7 +1059,7 @@ static void mlx4_ib_disassociate_ucontext(struct ib_ucontext *ibcontext)
 		context->hw_bar_info[i].vma->vm_ops = NULL;
 	}
 
-	up_read(&owning_mm->mmap_sem);
+	up_write(&owning_mm->mmap_sem);
 	mmput(owning_mm);
 	put_task_struct(owning_process);
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 038/101] HSI: ssi_protocol: double free in ssip_pn_xmit()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3026050179a3a9a6f5c892c414b5e36ecf092081 ]

If skb_pad() fails then it frees skb and we don't need to free it again
at the end of the function.

Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hsi/clients/ssi_protocol.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c
index a38af68cf326..0a0628d11c0b 100644
--- a/drivers/hsi/clients/ssi_protocol.c
+++ b/drivers/hsi/clients/ssi_protocol.c
@@ -976,7 +976,7 @@ static int ssip_pn_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto drop;
 	/* Pad to 32-bits - FIXME: Revisit*/
 	if ((skb->len & 3) && skb_pad(skb, 4 - (skb->len & 3)))
-		goto drop;
+		goto inc_dropped;
 
 	/*
 	 * Modem sends Phonet messages over SSI with its own endianess...
@@ -1028,8 +1028,9 @@ static int ssip_pn_xmit(struct sk_buff *skb, struct net_device *dev)
 drop2:
 	hsi_free_msg(msg);
 drop:
-	dev->stats.tx_dropped++;
 	dev_kfree_skb(skb);
+inc_dropped:
+	dev->stats.tx_dropped++;
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 040/101] IB/mlx4: Change vma from shared to private

[Sasha Levin]

From: Maor Gottlieb <maorg@mellanox.com>

[ Upstream commit ca37a664a8e4e9988b220988ceb4d79e3316f195 ]

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/mlx4/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 9119e0b3c2b8..67c4c73343d4 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1055,6 +1055,8 @@ static void mlx4_ib_disassociate_ucontext(struct ib_ucontext *ibcontext)
 			BUG_ON(1);
 		}
 
+		context->hw_bar_info[i].vma->vm_flags &=
+			~(VM_SHARED | VM_MAYSHARE);
 		/* context going to be destroyed, should not access ops any more */
 		context->hw_bar_info[i].vma->vm_ops = NULL;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.4 041/101] ASoC: Intel: Skylake: Uninitialized variable in probe_codec()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e6a33532affd14c12688c0e9b2e773e8b2550f3b ]

My static checker complains that if snd_hdac_bus_get_response() returns
-EIO then "res" is uninitialized.  Fix this by initializing it to -1 so
that the error is handled correctly.

Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/soc/intel/skylake/skl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index b4844f78266f..f6c3be192cc9 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -280,7 +280,7 @@ static int probe_codec(struct hdac_ext_bus *ebus, int addr)
 	struct hdac_bus *bus = ebus_to_hbus(ebus);
 	unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) |
 		(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
-	unsigned int res;
+	unsigned int res = -1;
 
 	mutex_lock(&bus->cmd_mutex);
 	snd_hdac_bus_send_cmd(bus, cmd);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 042/101] Fix driver usage of 128B WQEs when WQ_CREATE is V1.

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 3f247de750b8dd8f50a2c1390e2a1238790a9dff ]

There are two versions of a structure for queue creation and setup that the
driver shares with FW. The driver was only treating as version 0.

Verify WQ_CREATE with 128B WQEs in V0 and V1.

Code review of another bug showed the driver passing
128B WQEs and 8 pages in WQ CREATE and V0.
Code inspection/instrumentation showed that the driver
uses V0 in WQ_CREATE and if the caller passes queue->entry_size
128B, the driver sets the hdr_version to V1 so all is good.
When I tested the V1 WQ_CREATE, the mailbox failed causing
the driver to unload.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/lpfc/lpfc_sli.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8379fbbc60db..ef43847153ea 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13493,6 +13493,9 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 	case LPFC_Q_CREATE_VERSION_1:
 		bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
 		       wq->entry_count);
+		bf_set(lpfc_mbox_hdr_version, &shdr->request,
+		       LPFC_Q_CREATE_VERSION_1);
+
 		switch (wq->entry_size) {
 		default:
 		case 64:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 043/101] netfilter: xt_CT: fix refcnt leak on error path

[Sasha Levin]

From: Gao Feng <fgao@ikuai8.com>

[ Upstream commit 470acf55a021713869b9bcc967268ac90c8a0fac ]

There are two cases which causes refcnt leak.

1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should
free the timeout refcnt.
Now goto the err_put_timeout error handler instead of going ahead.

2. When the time policy is not found, we should call module_put.
Otherwise, the related cthelper module cannot be removed anymore.
It is easy to reproduce by typing the following command:
  # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/xt_CT.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c
index e7ac07e53b59..febcfac7e3df 100644
--- a/net/netfilter/xt_CT.c
+++ b/net/netfilter/xt_CT.c
@@ -168,8 +168,10 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par,
 		goto err_put_timeout;
 	}
 	timeout_ext = nf_ct_timeout_ext_add(ct, timeout, GFP_ATOMIC);
-	if (timeout_ext == NULL)
+	if (!timeout_ext) {
 		ret = -ENOMEM;
+		goto err_put_timeout;
+	}
 
 	rcu_read_unlock();
 	return ret;
@@ -201,6 +203,7 @@ static int xt_ct_tg_check(const struct xt_tgchk_param *par,
 			  struct xt_ct_target_info_v1 *info)
 {
 	struct nf_conntrack_zone zone;
+	struct nf_conn_help *help;
 	struct nf_conn *ct;
 	int ret = -EOPNOTSUPP;
 
@@ -249,7 +252,7 @@ static int xt_ct_tg_check(const struct xt_tgchk_param *par,
 	if (info->timeout[0]) {
 		ret = xt_ct_set_timeout(ct, par, info->timeout);
 		if (ret < 0)
-			goto err3;
+			goto err4;
 	}
 	__set_bit(IPS_CONFIRMED_BIT, &ct->status);
 	nf_conntrack_get(&ct->ct_general);
@@ -257,6 +260,10 @@ static int xt_ct_tg_check(const struct xt_tgchk_param *par,
 	info->ct = ct;
 	return 0;
 
+err4:
+	help = nfct_help(ct);
+	if (help)
+		module_put(help->helper->me);
 err3:
 	nf_ct_tmpl_free(ct);
 err2:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 044/101] openvswitch: Delete conntrack entry clashing with an expectation.

[Sasha Levin]

From: Jarno Rajahalme <jarno@ovn.org>

[ Upstream commit cf5d70918877c6a6655dc1e92e2ebb661ce904fd ]

Conntrack helpers do not check for a potentially clashing conntrack
entry when creating a new expectation.  Also, nf_conntrack_in() will
check expectations (via init_conntrack()) only if a conntrack entry
can not be found.  The expectation for a packet which also matches an
existing conntrack entry will not be removed by conntrack, and is
currently handled inconsistently by OVS, as OVS expects the
expectation to be removed when the connection tracking entry matching
that expectation is confirmed.

It should be noted that normally an IP stack would not allow reuse of
a 5-tuple of an old (possibly lingering) connection for a new data
connection, so this is somewhat unlikely corner case.  However, it is
possible that a misbehaving source could cause conntrack entries be
created that could then interfere with new related connections.

Fix this in the OVS module by deleting the clashing conntrack entry
after an expectation has been matched.  This causes the following
nf_conntrack_in() call also find the expectation and remove it when
creating the new conntrack entry, as well as the forthcoming reply
direction packets to match the new related connection instead of the
old clashing conntrack entry.

Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Yang Song <yangsong@vmware.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/openvswitch/conntrack.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 6a2507f24b0f..1829adb23505 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -361,10 +361,38 @@ ovs_ct_expect_find(struct net *net, const struct nf_conntrack_zone *zone,
 		   u16 proto, const struct sk_buff *skb)
 {
 	struct nf_conntrack_tuple tuple;
+	struct nf_conntrack_expect *exp;
 
 	if (!nf_ct_get_tuplepr(skb, skb_network_offset(skb), proto, net, &tuple))
 		return NULL;
-	return __nf_ct_expect_find(net, zone, &tuple);
+
+	exp = __nf_ct_expect_find(net, zone, &tuple);
+	if (exp) {
+		struct nf_conntrack_tuple_hash *h;
+
+		/* Delete existing conntrack entry, if it clashes with the
+		 * expectation.  This can happen since conntrack ALGs do not
+		 * check for clashes between (new) expectations and existing
+		 * conntrack entries.  nf_conntrack_in() will check the
+		 * expectations only if a conntrack entry can not be found,
+		 * which can lead to OVS finding the expectation (here) in the
+		 * init direction, but which will not be removed by the
+		 * nf_conntrack_in() call, if a matching conntrack entry is
+		 * found instead.  In this case all init direction packets
+		 * would be reported as new related packets, while reply
+		 * direction packets would be reported as un-related
+		 * established packets.
+		 */
+		h = nf_conntrack_find_get(net, zone, &tuple);
+		if (h) {
+			struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
+
+			nf_ct_delete(ct, 0, 0);
+			nf_conntrack_put(&ct->ct_general);
+		}
+	}
+
+	return exp;
 }
 
 /* Determine whether skb->nfct is equal to the result of conntrack lookup. */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 046/101] wan: pc300too: abort path on failure

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 2a39e7aa8a98f777f0732ca7125b6c9668791760 ]

In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wan/pc300too.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index db363856e0b5..2b064998915f 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -347,6 +347,7 @@ static int pc300_pci_init_one(struct pci_dev *pdev,
 	    card->rambase == NULL) {
 		pr_err("ioremap() failed\n");
 		pc300_pci_remove_one(pdev);
+		return -ENOMEM;
 	}
 
 	/* PLX PCI 9050 workaround for local configuration register read bug */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 045/101] mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ec5ab8933772c87f24ad62a4a602fe8949f423c2 ]

devm_pinctrl_get() returns error pointers, it never returns NULL.

Fixes: 455e5cd6f736 ("mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/host/omap_hsmmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7fb0753abe30..6b814d7d6560 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1776,8 +1776,8 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
 	 */
 	if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) {
 		struct pinctrl *p = devm_pinctrl_get(host->dev);
-		if (!p) {
-			ret = -ENODEV;
+		if (IS_ERR(p)) {
+			ret = PTR_ERR(p);
 			goto err_free_irq;
 		}
 		if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 047/101] qlcnic: fix unchecked return value

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ]

Function pci_find_ext_capability() may return 0, which is an invalid
address. In function qlcnic_sriov_virtid_fn(), its return value is used
without validation. This may result in invalid memory access bugs. This
patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 7327b729ba2e..ffa6885acfc8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -127,6 +127,8 @@ static int qlcnic_sriov_virtid_fn(struct qlcnic_adapter *adapter, int vf_id)
 		return 0;
 
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos)
+		return 0;
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 048/101] scsi: mac_esp: Replace bogus memory barrier with spinlock

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 4da2b1eb230ba4ad19b58984dc52e05b1073df5f ]

Commit da244654c66e ("[SCSI] mac_esp: fix for quadras with two esp
chips") added mac_scsi_esp_intr() to handle the IRQ lines from a pair of
on-board ESP chips (a normal shared IRQ did not work).

Proper mutual exclusion was missing from that patch. This patch fixes
race conditions between comparison and assignment of esp_chips[]
pointers.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/mac_esp.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 14c0334f41e4..26c67c42985c 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -55,6 +55,7 @@ struct mac_esp_priv {
 	int error;
 };
 static struct esp *esp_chips[2];
+static DEFINE_SPINLOCK(esp_chips_lock);
 
 #define MAC_ESP_GET_PRIV(esp) ((struct mac_esp_priv *) \
 			       platform_get_drvdata((struct platform_device *) \
@@ -562,15 +563,18 @@ static int esp_mac_probe(struct platform_device *dev)
 	}
 
 	host->irq = IRQ_MAC_SCSI;
-	esp_chips[dev->id] = esp;
-	mb();
-	if (esp_chips[!dev->id] == NULL) {
-		err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
-		if (err < 0) {
-			esp_chips[dev->id] = NULL;
-			goto fail_free_priv;
-		}
+
+	/* The request_irq() call is intended to succeed for the first device
+	 * and fail for the second device.
+	 */
+	err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
+	spin_lock(&esp_chips_lock);
+	if (err < 0 && esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
+		goto fail_free_priv;
 	}
+	esp_chips[dev->id] = esp;
+	spin_unlock(&esp_chips_lock);
 
 	err = scsi_esp_register(esp, &dev->dev);
 	if (err)
@@ -579,8 +583,13 @@ static int esp_mac_probe(struct platform_device *dev)
 	return 0;
 
 fail_free_irq:
-	if (esp_chips[!dev->id] == NULL)
+	spin_lock(&esp_chips_lock);
+	esp_chips[dev->id] = NULL;
+	if (esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
 		free_irq(host->irq, esp);
+	} else
+		spin_unlock(&esp_chips_lock);
 fail_free_priv:
 	kfree(mep);
 fail_free_command_block:
@@ -599,9 +608,13 @@ static int esp_mac_remove(struct platform_device *dev)
 
 	scsi_esp_unregister(esp);
 
+	spin_lock(&esp_chips_lock);
 	esp_chips[dev->id] = NULL;
-	if (!(esp_chips[0] || esp_chips[1]))
+	if (esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
 		free_irq(irq, NULL);
+	} else
+		spin_unlock(&esp_chips_lock);
 
 	kfree(mep);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 049/101] infiniband/uverbs: Fix integer overflows

[Sasha Levin]

From: Vlad Tsyrklevich <vlad@tsyrklevich.net>

[ Upstream commit 4f7f4dcfff2c19debbcdbcc861c325610a15e0c5 ]

The 'num_sge' variable is verfied to be smaller than the 'sge_count'
variable; however, since both are user-controlled it's possible to cause
an integer overflow for the kmalloc multiply on 32-bit platforms
(num_sge and sge_count are both defined u32). By crafting an input that
causes a smaller-than-expected allocation it's possible to write
controlled data out-of-bounds.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/uverbs_cmd.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index b7a73f1a8beb..3eb967521917 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -2436,9 +2436,13 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file,
 
 static void *alloc_wr(size_t wr_size, __u32 num_sge)
 {
+	if (num_sge >= (U32_MAX - ALIGN(wr_size, sizeof (struct ib_sge))) /
+		       sizeof (struct ib_sge))
+		return NULL;
+
 	return kmalloc(ALIGN(wr_size, sizeof (struct ib_sge)) +
 			 num_sge * sizeof (struct ib_sge), GFP_KERNEL);
-};
+}
 
 ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file,
 			    struct ib_device *ib_dev,
@@ -2665,6 +2669,13 @@ static struct ib_recv_wr *ib_uverbs_unmarshall_recv(const char __user *buf,
 			goto err;
 		}
 
+		if (user_wr->num_sge >=
+		    (U32_MAX - ALIGN(sizeof *next, sizeof (struct ib_sge))) /
+		    sizeof (struct ib_sge)) {
+			ret = -EINVAL;
+			goto err;
+		}
+
 		next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
 			       user_wr->num_sge * sizeof (struct ib_sge),
 			       GFP_KERNEL);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 050/101] NFS: don't try to cross a mountpount when there isn't one there.

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 99bbf6ecc694dfe0b026e15359c5aa2a60b97a93 ]

consider the sequence of commands:
 mkdir -p /import/nfs /import/bind /import/etc
 mount --bind / /import/bind
 mount --make-private /import/bind
 mount --bind /import/etc /import/bind/etc

 exportfs -o rw,no_root_squash,crossmnt,async,no_subtree_check localhost:/
 mount -o vers=4 localhost:/ /import/nfs
 ls -l /import/nfs/etc

You would not expect this to report a stale file handle.
Yet it does.

The manipulations under /import/bind cause the dentry for
/etc to get the DCACHE_MOUNTED flag set, even though nothing
is mounted on /etc.  This causes nfsd to call
nfsd_cross_mnt() even though there is no mountpoint.  So an
upcall to mountd for "/etc" is performed.

The 'crossmnt' flag on the export of / causes mountd to
report that /etc is exported as it is a descendant of /.  It
assumes the kernel wouldn't ask about something that wasn't
a mountpoint.  The filehandle returned identifies the
filesystem and the inode number of /etc.

When this filehandle is presented to rpc.mountd, via
"nfsd.fh", the inode cannot be found associated with any
name in /etc/exports, or with any mountpoint listed by
getmntent().  So rpc.mountd says the filehandle doesn't
exist. Hence ESTALE.

This is fixed by teaching nfsd not to trust DCACHE_MOUNTED
too much.  It is just a hint, not a guarantee.
Change nfsd_mountpoint() to return '1' for a certain mountpoint,
'2' for a possible mountpoint, and 0 otherwise.

Then change nfsd_crossmnt() to check if follow_down()
actually found a mountpount and, if not, to avoid performing
a lookup if the location is not known to certainly require
an export-point.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfsd/vfs.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 91e0c5429b4d..17138a97f306 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -92,6 +92,12 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp,
 	err = follow_down(&path);
 	if (err < 0)
 		goto out;
+	if (path.mnt == exp->ex_path.mnt && path.dentry == dentry &&
+	    nfsd_mountpoint(dentry, exp) == 2) {
+		/* This is only a mountpoint in some other namespace */
+		path_put(&path);
+		goto out;
+	}
 
 	exp2 = rqst_exp_get_by_name(rqstp, &path);
 	if (IS_ERR(exp2)) {
@@ -165,16 +171,26 @@ static int nfsd_lookup_parent(struct svc_rqst *rqstp, struct dentry *dparent, st
 /*
  * For nfsd purposes, we treat V4ROOT exports as though there was an
  * export at *every* directory.
+ * We return:
+ * '1' if this dentry *must* be an export point,
+ * '2' if it might be, if there is really a mount here, and
+ * '0' if there is no chance of an export point here.
  */
 int nfsd_mountpoint(struct dentry *dentry, struct svc_export *exp)
 {
-	if (d_mountpoint(dentry))
+	if (!d_inode(dentry))
+		return 0;
+	if (exp->ex_flags & NFSEXP_V4ROOT)
 		return 1;
 	if (nfsd4_is_junction(dentry))
 		return 1;
-	if (!(exp->ex_flags & NFSEXP_V4ROOT))
-		return 0;
-	return d_inode(dentry) != NULL;
+	if (d_mountpoint(dentry))
+		/*
+		 * Might only be a mountpoint in a different namespace,
+		 * but we need to check.
+		 */
+		return 2;
+	return 0;
 }
 
 __be32
-- 
2.14.1

[PATCH AUTOSEL for 4.4 051/101] iio: st_pressure: st_accel: Initialise sensor platform data properly

[Sasha Levin]

From: Shrirang Bagul <shrirang.bagul@canonical.com>

[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]

This patch fixes the sensor platform data initialisation for st_pressure
and st_accel device drivers. Without this patch, the driver fails to
register the sensors when the user removes and re-loads the driver.

1. Unload the kernel modules for st_pressure
$ sudo rmmod st_pressure_i2c
$ sudo rmmod st_pressure

2. Re-load the driver
$ sudo insmod st_pressure
$ sudo insmod st_pressure_i2c

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/accel/st_accel_core.c       | 7 ++++---
 drivers/iio/pressure/st_pressure_core.c | 8 ++++----
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 197a08b4e2f3..84ab20c6b389 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -628,6 +628,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)adata->dev->platform_data;
 	int irq = adata->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -652,9 +654,8 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 					&adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	if (!adata->dev->platform_data)
-		adata->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_accel_pdata;
+	if (!pdata)
+		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
 	if (err < 0)
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 5056bd68573f..270eeac928bc 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -436,6 +436,8 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)press_data->dev->platform_data;
 	int irq = press_data->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -464,10 +466,8 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!press_data->dev->platform_data &&
-				press_data->sensor_settings->drdy_irq.addr)
-		press_data->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_press_pdata;
+	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
 	if (err < 0)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 053/101] rndis_wlan: add return value validation

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/rndis_wlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index a13d1f2b5912..259590013382 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -3425,6 +3425,10 @@ static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 	/* because rndis_command() sleeps we need to use workqueue */
 	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+	if (!priv->workqueue) {
+		wiphy_free(wiphy);
+		return -ENOMEM;
+	}
 	INIT_WORK(&priv->work, rndis_wlan_worker);
 	INIT_DELAYED_WORK(&priv->dev_poller_work, rndis_device_poller);
 	INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 052/101] mt7601u: check return value of alloc_skb

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 5fb01e91daf84ad1e50edfcf63116ecbe31e7ba7 ]

Function alloc_skb() will return a NULL pointer if there is no enough
memory. However, in function mt7601u_mcu_msg_alloc(), its return value
is not validated before it is used. This patch fixes it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/mediatek/mt7601u/mcu.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c b/drivers/net/wireless/mediatek/mt7601u/mcu.c
index fbb1986eda3c..686b1b5dd394 100644
--- a/drivers/net/wireless/mediatek/mt7601u/mcu.c
+++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c
@@ -66,8 +66,10 @@ mt7601u_mcu_msg_alloc(struct mt7601u_dev *dev, const void *data, int len)
 	WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */
 
 	skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
-	skb_reserve(skb, MT_DMA_HDR_LEN);
-	memcpy(skb_put(skb, len), data, len);
+	if (skb) {
+		skb_reserve(skb, MT_DMA_HDR_LEN);
+		memcpy(skb_put(skb, len), data, len);
+	}
 
 	return skb;
 }
@@ -170,6 +172,8 @@ static int mt7601u_mcu_function_select(struct mt7601u_dev *dev,
 	};
 
 	skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
 	return mt7601u_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5);
 }
 
@@ -205,6 +209,8 @@ mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val)
 	};
 
 	skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
 	return mt7601u_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 054/101] Btrfs: send, fix file hole not being preserved due to inline extent

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit e1cbfd7bf6dabdac561c75d08357571f44040a45 ]

Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:

  $ mkfs.btrfs -f /dev/sdb
  $ mount -o compress /dev/sdb /mnt
  $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
  $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar

In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7bf6
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.

So teach the incremental send code to deal with this particular case.

The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/send.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index c5bbb5300658..19b56873b797 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5008,13 +5008,19 @@ static int is_extent_unchanged(struct send_ctx *sctx,
 	while (key.offset < ekey->offset + left_len) {
 		ei = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
 		right_type = btrfs_file_extent_type(eb, ei);
-		if (right_type != BTRFS_FILE_EXTENT_REG) {
+		if (right_type != BTRFS_FILE_EXTENT_REG &&
+		    right_type != BTRFS_FILE_EXTENT_INLINE) {
 			ret = 0;
 			goto out;
 		}
 
 		right_disknr = btrfs_file_extent_disk_bytenr(eb, ei);
-		right_len = btrfs_file_extent_num_bytes(eb, ei);
+		if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+			right_len = btrfs_file_extent_inline_len(eb, slot, ei);
+			right_len = PAGE_ALIGN(right_len);
+		} else {
+			right_len = btrfs_file_extent_num_bytes(eb, ei);
+		}
 		right_offset = btrfs_file_extent_offset(eb, ei);
 		right_gen = btrfs_file_extent_generation(eb, ei);
 
@@ -5028,6 +5034,19 @@ static int is_extent_unchanged(struct send_ctx *sctx,
 			goto out;
 		}
 
+		/*
+		 * We just wanted to see if when we have an inline extent, what
+		 * follows it is a regular extent (wanted to check the above
+		 * condition for inline extents too). This should normally not
+		 * happen but it's possible for example when we have an inline
+		 * compressed extent representing data with a size matching
+		 * the page size (currently the same as sector size).
+		 */
+		if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+			ret = 0;
+			goto out;
+		}
+
 		left_offset_fixed = left_offset;
 		if (key.offset < ekey->offset) {
 			/* Fix the right offset for 2a and 7. */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 055/101] mac80211: don't parse encrypted management frames in ieee80211_frame_acked

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ]

ieee80211_frame_acked is called when a frame is acked by
the peer. In case this is a management frame, we check
if this an SMPS frame, in which case we can update our
antenna configuration.

When we parse the management frame we look at the category
in case it is an action frame. That byte sits after the IV
in case the frame was encrypted. This means that if the
frame was encrypted, we basically look at the IV instead
of looking at the category. It is then theorically
possible that we think that an SMPS action frame was acked
where really we had another frame that was encrypted.

Since the only management frame whose ack needs to be
tracked is the SMPS action frame, and that frame is not
a robust management frame, it will never be encrypted.
The easiest way to fix this problem is then to not look
at frames that were encrypted.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/status.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 5bad05e9af90..45fb1abdb265 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -194,6 +194,7 @@ static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
 	}
 
 	if (ieee80211_is_action(mgmt->frame_control) &&
+	    !ieee80211_has_protected(mgmt->frame_control) &&
 	    mgmt->u.action.category == WLAN_CATEGORY_HT &&
 	    mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS &&
 	    ieee80211_sdata_running(sdata)) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 056/101] mfd: palmas: Reset the POWERHOLD mux during power off

[Sasha Levin]

From: Keerthy <j-keerthy@ti.com>

[ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ]

POWERHOLD signal has higher priority  over the DEV_ON bit.
So power off will not happen if the POWERHOLD is held high.
Hence reset the MUX to GPIO_7 mode to release the POWERHOLD
and the DEV_ON bit to take effect to power off the PMIC.

PMIC Power off happens in dire situations like thermal shutdown
so irrespective of the POWERHOLD setting go ahead and turn off
the powerhold.  Currently poweroff is broken on boards that have
powerhold enabled. This fixes poweroff on those boards.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mfd/palmas.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 8f8bacb67a15..a6b5259ffbdd 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -430,6 +430,20 @@ static void palmas_power_off(void)
 {
 	unsigned int addr;
 	int ret, slave;
+	struct device_node *np = palmas_dev->dev->of_node;
+
+	if (of_property_read_bool(np, "ti,palmas-override-powerhold")) {
+		addr = PALMAS_BASE_TO_REG(PALMAS_PU_PD_OD_BASE,
+					  PALMAS_PRIMARY_SECONDARY_PAD2);
+		slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
+
+		ret = regmap_update_bits(palmas_dev->regmap[slave], addr,
+				PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK, 0);
+		if (ret)
+			dev_err(palmas_dev->dev,
+				"Unable to write PRIMARY_SECONDARY_PAD2 %d\n",
+				ret);
+	}
 
 	if (!palmas_dev)
 		return;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 058/101] staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y

[Sasha Levin]

From: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>

[ Upstream commit 3c2bf0bd08123f3497bd3e84bd9088c937b0cb40 ]

The root issue is that we are not allowed to have items on the
stack being passed to "DMA" like operations. In this case we have
a vmcall and an inline completion of scsi command.

This patch fixes the issue by moving the variables on stack in
do_scsi_nolinuxstat() to heap memory.

Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/unisys/visorhba/visorhba_main.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/unisys/visorhba/visorhba_main.c b/drivers/staging/unisys/visorhba/visorhba_main.c
index c119f20dfd44..3f2ccf9d7358 100644
--- a/drivers/staging/unisys/visorhba/visorhba_main.c
+++ b/drivers/staging/unisys/visorhba/visorhba_main.c
@@ -792,7 +792,7 @@ static void
 do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
 {
 	struct scsi_device *scsidev;
-	unsigned char buf[36];
+	unsigned char *buf;
 	struct scatterlist *sg;
 	unsigned int i;
 	char *this_page;
@@ -807,6 +807,10 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
 		if (cmdrsp->scsi.no_disk_result == 0)
 			return;
 
+		buf = kzalloc(sizeof(char) * 36, GFP_KERNEL);
+		if (!buf)
+			return;
+
 		/* Linux scsi code wants a device at Lun 0
 		 * to issue report luns, but we don't want
 		 * a disk there so we'll present a processor
@@ -820,6 +824,7 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
 		if (scsi_sg_count(scsicmd) == 0) {
 			memcpy(scsi_sglist(scsicmd), buf,
 			       cmdrsp->scsi.bufflen);
+			kfree(buf);
 			return;
 		}
 
@@ -831,6 +836,7 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
 			memcpy(this_page, buf + bufind, sg[i].length);
 			kunmap_atomic(this_page_orig);
 		}
+		kfree(buf);
 	} else {
 		devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
 		for_each_vdisk_match(vdisk, devdata, scsidev) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 057/101] mtip32xx: use runtime tag to initialize command header

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit a4e84aae8139aca9fbfbced1f45c51ca81b57488 ]

mtip32xx supposes that 'request_idx' passed to .init_request()
is tag of the request, and use that as request's tag to initialize
command header.

After MQ IO scheduler is in, request tag assigned isn't same with
the request index anymore, so cause strange hardware failure on
mtip32xx, even whole system panic is triggered.

This patch fixes the issue by initializing command header via
request's real tag.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 55d3d1da72de..9ba89315dae1 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -169,6 +169,25 @@ static bool mtip_check_surprise_removal(struct pci_dev *pdev)
 	return false; /* device present */
 }
 
+/* we have to use runtime tag to setup command header */
+static void mtip_init_cmd_header(struct request *rq)
+{
+	struct driver_data *dd = rq->q->queuedata;
+	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
+	u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
+
+	/* Point the command headers at the command tables. */
+	cmd->command_header = dd->port->command_list +
+				(sizeof(struct mtip_cmd_hdr) * rq->tag);
+	cmd->command_header_dma = dd->port->command_list_dma +
+				(sizeof(struct mtip_cmd_hdr) * rq->tag);
+
+	if (host_cap_64)
+		cmd->command_header->ctbau = __force_bit2int cpu_to_le32((cmd->command_dma >> 16) >> 16);
+
+	cmd->command_header->ctba = __force_bit2int cpu_to_le32(cmd->command_dma & 0xFFFFFFFF);
+}
+
 static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 {
 	struct request *rq;
@@ -180,6 +199,9 @@ static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 	if (IS_ERR(rq))
 		return NULL;
 
+	/* Internal cmd isn't submitted via .queue_rq */
+	mtip_init_cmd_header(rq);
+
 	return blk_mq_rq_to_pdu(rq);
 }
 
@@ -3818,6 +3840,8 @@ static int mtip_queue_rq(struct blk_mq_hw_ctx *hctx,
 	struct request *rq = bd->rq;
 	int ret;
 
+	mtip_init_cmd_header(rq);
+
 	if (unlikely(mtip_check_unal_depth(hctx, rq)))
 		return BLK_MQ_RQ_QUEUE_BUSY;
 
@@ -3849,7 +3873,6 @@ static int mtip_init_cmd(void *data, struct request *rq, unsigned int hctx_idx,
 {
 	struct driver_data *dd = data;
 	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
-	u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
 
 	/*
 	 * For flush requests, request_idx starts at the end of the
@@ -3866,17 +3889,6 @@ static int mtip_init_cmd(void *data, struct request *rq, unsigned int hctx_idx,
 
 	memset(cmd->command, 0, CMD_DMA_ALLOC_SZ);
 
-	/* Point the command headers at the command tables. */
-	cmd->command_header = dd->port->command_list +
-				(sizeof(struct mtip_cmd_hdr) * request_idx);
-	cmd->command_header_dma = dd->port->command_list_dma +
-				(sizeof(struct mtip_cmd_hdr) * request_idx);
-
-	if (host_cap_64)
-		cmd->command_header->ctbau = __force_bit2int cpu_to_le32((cmd->command_dma >> 16) >> 16);
-
-	cmd->command_header->ctba = __force_bit2int cpu_to_le32(cmd->command_dma & 0xFFFFFFFF);
-
 	sg_init_table(cmd->sg, MTIP_MAX_SG);
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 059/101] staging: wilc1000: fix unchecked return value

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 9e96652756ad647b7bcc03cb99ffc9756d7b5f93 ]

Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/wilc1000/linux_mon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index 450af1b77f99..b2092c5ec7f3 100644
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -251,6 +251,8 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb,
 
 	if (skb->data[0] == 0xc0 && (!(memcmp(broadcast, &skb->data[4], 6)))) {
 		skb2 = dev_alloc_skb(skb->len + sizeof(struct wilc_wfi_radiotap_cb_hdr));
+		if (!skb2)
+			return -ENOMEM;
 
 		memcpy(skb_put(skb2, skb->len), skb->data, skb->len);
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 060/101] mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a

[Sasha Levin]

From: yangbo lu <yangbo.lu@nxp.com>

[ Upstream commit a627f025eb0534052ff451427c16750b3530634c ]

The ls1046a datasheet specified that the max SD clock frequency
for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet
specified it's 125MHz for ls1012a. So this patch is to add the
limitation.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 83b1226471c1..ac66c61d9433 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -418,6 +418,20 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (esdhc->vendor_ver < VENDOR_V_23)
 		pre_div = 2;
 
+	/*
+	 * Limit SD clock to 167MHz for ls1046a according to its datasheet
+	 */
+	if (clock > 167000000 &&
+	    of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
+		clock = 167000000;
+
+	/*
+	 * Limit SD clock to 125MHz for ls1012a according to its datasheet
+	 */
+	if (clock > 125000000 &&
+	    of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
+		clock = 125000000;
+
 	/* Workaround to reduce the clock frequency for p1010 esdhc */
 	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
 		if (clock > 20000000)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 062/101] ipmi/watchdog: fix wdog hang on panic waiting for ipmi response

[Sasha Levin]

From: Robert Lippert <roblip@gmail.com>

[ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ]

Commit c49c097610fe ("ipmi: Don't call receive handler in the
panic context") means that the panic_recv_free is not called during a
panic and the atomic count does not drop to 0.

Fix this by only expecting one decrement of the atomic variable
which comes from panic_smi_free.

Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/ipmi/ipmi_watchdog.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 40d400fe5bb7..4ada103945f0 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -515,7 +515,7 @@ static void panic_halt_ipmi_heartbeat(void)
 	msg.cmd = IPMI_WDOG_RESET_TIMER;
 	msg.data = NULL;
 	msg.data_len = 0;
-	atomic_add(2, &panic_done_count);
+	atomic_add(1, &panic_done_count);
 	rv = ipmi_request_supply_msgs(watchdog_user,
 				      (struct ipmi_addr *) &addr,
 				      0,
@@ -525,7 +525,7 @@ static void panic_halt_ipmi_heartbeat(void)
 				      &panic_halt_heartbeat_recv_msg,
 				      1);
 	if (rv)
-		atomic_sub(2, &panic_done_count);
+		atomic_sub(1, &panic_done_count);
 }
 
 static struct ipmi_smi_msg panic_halt_smi_msg = {
@@ -549,12 +549,12 @@ static void panic_halt_ipmi_set_timeout(void)
 	/* Wait for the messages to be free. */
 	while (atomic_read(&panic_done_count) != 0)
 		ipmi_poll_interface(watchdog_user);
-	atomic_add(2, &panic_done_count);
+	atomic_add(1, &panic_done_count);
 	rv = i_ipmi_set_timeout(&panic_halt_smi_msg,
 				&panic_halt_recv_msg,
 				&send_heartbeat_now);
 	if (rv) {
-		atomic_sub(2, &panic_done_count);
+		atomic_sub(1, &panic_done_count);
 		printk(KERN_WARNING PFX
 		       "Unable to extend the watchdog timeout.");
 	} else {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 061/101] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ]

The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be
set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC
mode. However in EP mode, the host system is not able to access the
MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 7581e036bda6..70e3b711e79c 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
 	.wkdep_srcs	  = pcie_wkup_sleep_deps,
 	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain atl_7xx_clkdm = {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 065/101] bnx2x: Align RX buffers

[Sasha Levin]

From: Scott Wood <swood@redhat.com>

[ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ]

The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.

Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.

This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:

Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656
Faulting instruction address: 0xc00000000080ef8c
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common
CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2
task: c00000ffd4892400 task.stack: c00000ffd4920000
NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320
REGS: c00000ffffc33710 TRAP: 0600   Not tainted  (4.11.0-rc8-00088-g4c761da)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
  CR: 24082042  XER: 00000000
CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1
GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100
GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000
GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f
GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001
GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000
GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a
GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100
NIP [c00000000080ef8c] __skb_clone+0xdc/0x140
LR [c00000000080eee8] __skb_clone+0x38/0x140
Call Trace:
[c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable)
[c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510
[c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80
[c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0
[c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260
[c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x]
[c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480
[c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0
[c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120
[c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200
[c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24
[c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110
[c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index e5911ccb2148..889462170b7c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2044,6 +2044,7 @@ static void bnx2x_set_rx_buf_size(struct bnx2x *bp)
 				  ETH_OVREHEAD +
 				  mtu +
 				  BNX2X_FW_RX_ALIGN_END;
+		fp->rx_buf_size = SKB_DATA_ALIGN(fp->rx_buf_size);
 		/* Note : rx_buf_size doesn't take into account NET_SKB_PAD */
 		if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE)
 			fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 063/101] ACPI / PMIC: xpower: Fix power_table addresses

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]

The power table addresses should be contiguous, but there was a hole
where 0x34 was missing. On most devices this is not a problem as
addresses above 0x34 are used for the BUC# convertors which are not
used in the DSDTs I've access to but after the BUC# convertors
there is a field named GPI1 in the DSTDs, which does get used in some
cases and ended up turning BUC6 on and off due to the wrong addresses,
resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my
Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to
make it easier to compare the register and bits used at each address
with the datasheet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/pmic/intel_pmic_xpower.c | 50 +++++++++++++++++------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
index 6a082d4de12c..24a793957bc0 100644
--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -28,97 +28,97 @@ static struct pmic_table power_table[] = {
 		.address = 0x00,
 		.reg = 0x13,
 		.bit = 0x05,
-	},
+	}, /* ALD1 */
 	{
 		.address = 0x04,
 		.reg = 0x13,
 		.bit = 0x06,
-	},
+	}, /* ALD2 */
 	{
 		.address = 0x08,
 		.reg = 0x13,
 		.bit = 0x07,
-	},
+	}, /* ALD3 */
 	{
 		.address = 0x0c,
 		.reg = 0x12,
 		.bit = 0x03,
-	},
+	}, /* DLD1 */
 	{
 		.address = 0x10,
 		.reg = 0x12,
 		.bit = 0x04,
-	},
+	}, /* DLD2 */
 	{
 		.address = 0x14,
 		.reg = 0x12,
 		.bit = 0x05,
-	},
+	}, /* DLD3 */
 	{
 		.address = 0x18,
 		.reg = 0x12,
 		.bit = 0x06,
-	},
+	}, /* DLD4 */
 	{
 		.address = 0x1c,
 		.reg = 0x12,
 		.bit = 0x00,
-	},
+	}, /* ELD1 */
 	{
 		.address = 0x20,
 		.reg = 0x12,
 		.bit = 0x01,
-	},
+	}, /* ELD2 */
 	{
 		.address = 0x24,
 		.reg = 0x12,
 		.bit = 0x02,
-	},
+	}, /* ELD3 */
 	{
 		.address = 0x28,
 		.reg = 0x13,
 		.bit = 0x02,
-	},
+	}, /* FLD1 */
 	{
 		.address = 0x2c,
 		.reg = 0x13,
 		.bit = 0x03,
-	},
+	}, /* FLD2 */
 	{
 		.address = 0x30,
 		.reg = 0x13,
 		.bit = 0x04,
-	},
+	}, /* FLD3 */
 	{
-		.address = 0x38,
+		.address = 0x34,
 		.reg = 0x10,
 		.bit = 0x03,
-	},
+	}, /* BUC1 */
 	{
-		.address = 0x3c,
+		.address = 0x38,
 		.reg = 0x10,
 		.bit = 0x06,
-	},
+	}, /* BUC2 */
 	{
-		.address = 0x40,
+		.address = 0x3c,
 		.reg = 0x10,
 		.bit = 0x05,
-	},
+	}, /* BUC3 */
 	{
-		.address = 0x44,
+		.address = 0x40,
 		.reg = 0x10,
 		.bit = 0x04,
-	},
+	}, /* BUC4 */
 	{
-		.address = 0x48,
+		.address = 0x44,
 		.reg = 0x10,
 		.bit = 0x01,
-	},
+	}, /* BUC5 */
 	{
-		.address = 0x4c,
+		.address = 0x48,
 		.reg = 0x10,
 		.bit = 0x00
-	},
+	}, /* BUC6 */
 };
 
 /* TMP0 - TMP5 are the same, all from GPADC */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 064/101] drm/nouveau/kms: Increase max retries in scanout position queries.

[Sasha Levin]

From: Mario Kleiner <mario.kleiner.de@gmail.com>

[ Upstream commit 60b95d709525e3ce1c51e1fc93175dcd1755d345 ]

So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.

Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank  stuff, e.g.,
desktop compositors.

Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.

As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/nouveau/nouveau_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 00de1bf81519..9dfc2471ea09 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -104,7 +104,7 @@ nouveau_display_scanoutpos_head(struct drm_crtc *crtc, int *vpos, int *hpos,
 	};
 	struct nouveau_display *disp = nouveau_display(crtc->dev);
 	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[drm_crtc_index(crtc)];
-	int ret, retry = 1;
+	int ret, retry = 20;
 
 	do {
 		ret = nvif_mthd(&disp->disp, 0, &args, sizeof(args));
-- 
2.14.1

[PATCH AUTOSEL for 4.4 066/101] power: supply: pda_power: move from timer to delayed_work

[Sasha Levin]

From: Michael Trimarchi <michael@amarulasolutions.com>

[ Upstream commit 633e8799ddc09431be2744c4a1efdbda13af2b0b ]

This changed is needed to avoid locking problem during
boot as shown:

<5>[    8.824096] Registering SWP/SWPB emulation handler
<6>[    8.977294] clock: disabling unused clocks to save power
<3>[    9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269
<3>[    9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[    9.130249] 3 locks held by swapper/0/1:
<4>[    9.134613]  #0:  (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8
<4>[    9.144500]  #1:  (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8
<4>[    9.154357]  #2:  (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec
<4>[    9.163726] Backtrace:
<4>[    9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24)
<4>[    9.175811]  r6:00203230 r5:0000010d r4:d782e000 r3:60000113
<4>[    9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128)
<4>[    9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c)
<4>[    9.201660]  r5:c02d5350 r4:d79a0c64
<4>[    9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118)
<4>[    9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4)
<4>[    9.228027]  r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000
<4>[    9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48)
<4>[    9.243804]  r5:d782e000 r4:c1767e94
<4>[    9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8)
<4>[    9.257537]  r4:c1767e94 r3:00000002
<4>[    9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec)
<4>[    9.272033]  r4:c1767eb0 r3:00000000
<4>[    9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298)
<4>[    9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0)
<4>[    9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0)
<4>[    9.303680]  r4:c1194e98 r3:c00bc778
<4>[    9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68)
<4>[    9.316955]  r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100
<4>[    9.324310] r3:c026ba48
<4>[    9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74)
<4>[    9.336456] Exception stack(0xd782fc08 to 0xd782fc50)
<4>[    9.342041] fc00:                   d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000
<4>[    9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50
<4>[    9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff

Fixes: b2998049cfae ("[BATTERY] pda_power platform driver")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/power/pda_power.c | 49 ++++++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index dfe1ee89f7c7..922a86787c5c 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -30,9 +30,9 @@ static inline unsigned int get_irq_flags(struct resource *res)
 static struct device *dev;
 static struct pda_power_pdata *pdata;
 static struct resource *ac_irq, *usb_irq;
-static struct timer_list charger_timer;
-static struct timer_list supply_timer;
-static struct timer_list polling_timer;
+static struct delayed_work charger_work;
+static struct delayed_work polling_work;
+static struct delayed_work supply_work;
 static int polling;
 static struct power_supply *pda_psy_ac, *pda_psy_usb;
 
@@ -140,7 +140,7 @@ static void update_charger(void)
 	}
 }
 
-static void supply_timer_func(unsigned long unused)
+static void supply_work_func(struct work_struct *work)
 {
 	if (ac_status == PDA_PSY_TO_CHANGE) {
 		ac_status = new_ac_status;
@@ -161,11 +161,12 @@ static void psy_changed(void)
 	 * Okay, charger set. Now wait a bit before notifying supplicants,
 	 * charge power should stabilize.
 	 */
-	mod_timer(&supply_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_charger));
+	cancel_delayed_work(&supply_work);
+	schedule_delayed_work(&supply_work,
+			      msecs_to_jiffies(pdata->wait_for_charger));
 }
 
-static void charger_timer_func(unsigned long unused)
+static void charger_work_func(struct work_struct *work)
 {
 	update_status();
 	psy_changed();
@@ -184,13 +185,14 @@ static irqreturn_t power_changed_isr(int irq, void *power_supply)
 	 * Wait a bit before reading ac/usb line status and setting charger,
 	 * because ac/usb status readings may lag from irq.
 	 */
-	mod_timer(&charger_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
 
 	return IRQ_HANDLED;
 }
 
-static void polling_timer_func(unsigned long unused)
+static void polling_work_func(struct work_struct *work)
 {
 	int changed = 0;
 
@@ -211,8 +213,9 @@ static void polling_timer_func(unsigned long unused)
 	if (changed)
 		psy_changed();
 
-	mod_timer(&polling_timer,
-		  jiffies + msecs_to_jiffies(pdata->polling_interval));
+	cancel_delayed_work(&polling_work);
+	schedule_delayed_work(&polling_work,
+			      msecs_to_jiffies(pdata->polling_interval));
 }
 
 #if IS_ENABLED(CONFIG_USB_PHY)
@@ -250,8 +253,9 @@ static int otg_handle_notification(struct notifier_block *nb,
 	 * Wait a bit before reading ac/usb line status and setting charger,
 	 * because ac/usb status readings may lag from irq.
 	 */
-	mod_timer(&charger_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
 
 	return NOTIFY_OK;
 }
@@ -300,8 +304,8 @@ static int pda_power_probe(struct platform_device *pdev)
 	if (!pdata->ac_max_uA)
 		pdata->ac_max_uA = 500000;
 
-	setup_timer(&charger_timer, charger_timer_func, 0);
-	setup_timer(&supply_timer, supply_timer_func, 0);
+	INIT_DELAYED_WORK(&charger_work, charger_work_func);
+	INIT_DELAYED_WORK(&supply_work, supply_work_func);
 
 	ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
 	usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
@@ -385,9 +389,10 @@ static int pda_power_probe(struct platform_device *pdev)
 
 	if (polling) {
 		dev_dbg(dev, "will poll for status\n");
-		setup_timer(&polling_timer, polling_timer_func, 0);
-		mod_timer(&polling_timer,
-			  jiffies + msecs_to_jiffies(pdata->polling_interval));
+		INIT_DELAYED_WORK(&polling_work, polling_work_func);
+		cancel_delayed_work(&polling_work);
+		schedule_delayed_work(&polling_work,
+				      msecs_to_jiffies(pdata->polling_interval));
 	}
 
 	if (ac_irq || usb_irq)
@@ -433,9 +438,9 @@ static int pda_power_remove(struct platform_device *pdev)
 		free_irq(ac_irq->start, pda_psy_ac);
 
 	if (polling)
-		del_timer_sync(&polling_timer);
-	del_timer_sync(&charger_timer);
-	del_timer_sync(&supply_timer);
+		cancel_delayed_work_sync(&polling_work);
+	cancel_delayed_work_sync(&charger_work);
+	cancel_delayed_work_sync(&supply_work);
 
 	if (pdata->is_usb_online)
 		power_supply_unregister(pda_psy_usb);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 067/101] Input: twl4030-pwrbutton - use correct device for irq request

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

[ Upstream commit 3071e9dd6cd3f2290d770117330f2c8b2e9a97e4 ]

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/misc/twl4030-pwrbutton.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 603fc2fadf05..12b20840fb74 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -70,7 +70,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	pwr->phys = "twl4030_pwrbutton/input0";
 	pwr->dev.parent = &pdev->dev;
 
-	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL, powerbutton_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
 			IRQF_ONESHOT,
 			"twl4030_pwrbutton", pwr);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 069/101] ia64: fix module loading for gcc-5.4

[Sasha Levin]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit a25fb8508c1b80dce742dbeaa4d75a1e9f2c5617 ]

Starting from gcc-5.4+ gcc generates MLX instructions in more cases to
refer local symbols:

    https://gcc.gnu.org/PR60465

That caused ia64 module loader to choke on such instructions:

    fuse: invalid slot number 1 for IMM64

The Linux kernel used to handle only case where relocation pointed to
slot=2 instruction in the bundle.  That limitation was fixed in linux by
commit 9c184a073bfd ("[IA64] Fix 2.6 kernel for the new ia64 assembler")
See

    http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433

This change lifts the slot=2 restriction from the kernel module loader.

Tested on 'fuse' and 'btrfs' kernel modules.

Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: H J Lu <hjl.tools@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Bug: https://bugs.gentoo.org/601014
Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/ia64/kernel/module.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index b15933c31b2f..36b2c94a8eb5 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -153,7 +153,7 @@ slot (const struct insn *insn)
 static int
 apply_imm64 (struct module *mod, struct insn *insn, uint64_t val)
 {
-	if (slot(insn) != 2) {
+	if (slot(insn) != 1 && slot(insn) != 2) {
 		printk(KERN_ERR "%s: invalid slot number %d for IMM64\n",
 		       mod->name, slot(insn));
 		return 0;
@@ -165,7 +165,7 @@ apply_imm64 (struct module *mod, struct insn *insn, uint64_t val)
 static int
 apply_imm60 (struct module *mod, struct insn *insn, uint64_t val)
 {
-	if (slot(insn) != 2) {
+	if (slot(insn) != 1 && slot(insn) != 2) {
 		printk(KERN_ERR "%s: invalid slot number %d for IMM60\n",
 		       mod->name, slot(insn));
 		return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 068/101] md/raid10: skip spare disk as 'first' disk

[Sasha Levin]

From: Shaohua Li <shli@fb.com>

[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ]

Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores
a case in reshape, the first rdev could be a spare disk, which shouldn't
be accounted as the first disk since it doesn't include the offset info.

Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop)
Cc: Guoqing Jiang <gqjiang@suse.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid10.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 05548af8df6f..3a0d557146c7 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4044,6 +4044,7 @@ static int raid10_start_reshape(struct mddev *mddev)
 				diff = 0;
 			if (first || diff < min_offset_diff)
 				min_offset_diff = diff;
+			first = 0;
 		}
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 070/101] tcm_fileio: Prevent information leak for short reads

[Sasha Levin]

From: Dmitry Monakhov <dmonakhov@openvz.org>

[ Upstream commit f11b55d13563e9428c88c873f4f03a6bef11ec0a ]

If we failed to read data from backing file (probably because some one
truncate file under us), we must zerofill cmd's data, otherwise it will
be returned as is. Most likely cmd's data are unitialized pages from
page cache. This result in information leak.

(Change BUG_ON into -EINVAL se_cmd failure - nab)

testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/target/target_core_file.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 2e35db7f4aac..c15af2fcf2ba 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -276,12 +276,11 @@ static int fd_do_rw(struct se_cmd *cmd, struct file *fd,
 	else
 		ret = vfs_iter_read(fd, &iter, &pos);
 
-	kfree(bvec);
-
 	if (is_write) {
 		if (ret < 0 || ret != data_length) {
 			pr_err("%s() write returned %d\n", __func__, ret);
-			return (ret < 0 ? ret : -EINVAL);
+			if (ret >= 0)
+				ret = -EINVAL;
 		}
 	} else {
 		/*
@@ -294,17 +293,29 @@ static int fd_do_rw(struct se_cmd *cmd, struct file *fd,
 				pr_err("%s() returned %d, expecting %u for "
 						"S_ISBLK\n", __func__, ret,
 						data_length);
-				return (ret < 0 ? ret : -EINVAL);
+				if (ret >= 0)
+					ret = -EINVAL;
 			}
 		} else {
 			if (ret < 0) {
 				pr_err("%s() returned %d for non S_ISBLK\n",
 						__func__, ret);
-				return ret;
+			} else if (ret != data_length) {
+				/*
+				 * Short read case:
+				 * Probably some one truncate file under us.
+				 * We must explicitly zero sg-pages to prevent
+				 * expose uninizialized pages to userspace.
+				 */
+				if (ret < data_length)
+					ret += iov_iter_zero(data_length - ret, &iter);
+				else
+					ret = -EINVAL;
 			}
 		}
 	}
-	return 1;
+	kfree(bvec);
+	return ret;
 }
 
 static sense_reason_t
-- 
2.14.1

[PATCH AUTOSEL for 4.4 071/101] video: fbdev: udlfb: Fix buffer on stack

[Sasha Levin]

From: Maksim Salau <maksim.salau@gmail.com>

[ Upstream commit 45f580c42e5c125d55dbd8099750a1998de3d917 ]

Allocate buffers on HEAP instead of STACK for local array
that is to be sent using usb_control_msg().

Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/udlfb.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index 53326badfb61..2add8def83be 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1487,15 +1487,25 @@ static struct device_attribute fb_device_attrs[] = {
 static int dlfb_select_std_channel(struct dlfb_data *dev)
 {
 	int ret;
-	u8 set_def_chn[] = {	   0x57, 0xCD, 0xDC, 0xA7,
+	void *buf;
+	static const u8 set_def_chn[] = {
+				0x57, 0xCD, 0xDC, 0xA7,
 				0x1C, 0x88, 0x5E, 0x15,
 				0x60, 0xFE, 0xC6, 0x97,
 				0x16, 0x3D, 0x47, 0xF2  };
 
+	buf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 			NR_USB_REQUEST_CHANNEL,
 			(USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0,
-			set_def_chn, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+			buf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+
+	kfree(buf);
+
 	return ret;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 072/101] sm501fb: don't return zero on failure path in sm501fb_start()

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit dc85e9a87420613b3129d5cc5ecd79c58351c546 ]

If fbmem iomemory mapping failed, sm501fb_start() breaks off
initialization, deallocates resources, but returns zero.
As a result, double deallocation can happen in sm501fb_stop().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/sm501fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index d0a4e2f79a57..d215faacce04 100644
--- a/drivers/video/fbdev/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
@@ -1600,6 +1600,7 @@ static int sm501fb_start(struct sm501fb_info *info,
 	info->fbmem = ioremap(res->start, resource_size(res));
 	if (info->fbmem == NULL) {
 		dev_err(dev, "cannot remap framebuffer\n");
+		ret = -ENXIO;
 		goto err_mem_res;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 073/101] net: hns: fix ethtool_get_strings overflow in hns driver

[Sasha Levin]

From: Timmy Li <lixiaoping3@huawei.com>

[ Upstream commit 412b65d15a7f8a93794653968308fc100f2aa87c ]

hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated
is not enough for ethtool_get_strings(), which will cause random memory
corruption.

When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the
the following can be observed without this patch:
[   43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80
[   43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070.
[   43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70)
[   43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b  ppe1_tx_pkt.kkkk
[   43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b  ppe1_tx_pkt_ok.k
[   43.115218] Next obj: start=ffff801fb0b69098, len=80
[   43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b.
[   43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38)
[   43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f  ty.kkkkkppe1_tx_
[   43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69  pkt_err_csum_fai

Signed-off-by: Timmy Li <lixiaoping3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c  | 2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c   | 2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c   | 2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
index b8517b00e706..a20bd8362712 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
@@ -648,7 +648,7 @@ static void hns_gmac_get_strings(u32 stringset, u8 *data)
 
 static int hns_gmac_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ARRAY_SIZE(g_gmac_stats_string);
 
 	return 0;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
index 67f33f185a44..6634aef0e841 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
@@ -384,7 +384,7 @@ void hns_ppe_update_stats(struct hns_ppe_cb *ppe_cb)
 
 int hns_ppe_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ETH_PPE_STATIC_NUM;
 	return 0;
 }
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
index 4db32c62f062..1d5b18d7a1d7 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
@@ -807,7 +807,7 @@ void hns_rcb_get_stats(struct hnae_queue *queue, u64 *data)
  */
 int hns_rcb_get_ring_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return HNS_RING_STATIC_REG_NUM;
 
 	return 0;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
index 802d55457f19..b1a27aef4425 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -776,7 +776,7 @@ static void hns_xgmac_get_strings(u32 stringset, u8 *data)
  */
 static int hns_xgmac_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ARRAY_SIZE(g_xgmac_stats_string);
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 074/101] cifs: small underflow in cnvrtDosUnixTm()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 564277eceeca01e02b1ef3e141cfb939184601b4 ]

January is month 1.  There is no zero-th month.  If someone passes a
zero month then it means we read from one space before the start of the
total_days_of_prev_months[] array.

We may as well also be strict about days as well.

Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/netmisc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index abae6dd2c6b9..cc88f4f0325e 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -980,10 +980,10 @@ struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time, int offset)
 		cifs_dbg(VFS, "illegal hours %d\n", st->Hours);
 	days = sd->Day;
 	month = sd->Month;
-	if ((days > 31) || (month > 12)) {
+	if (days < 1 || days > 31 || month < 1 || month > 12) {
 		cifs_dbg(VFS, "illegal date, month %d day: %d\n", month, days);
-		if (month > 12)
-			month = 12;
+		days = clamp(days, 1, 31);
+		month = clamp(month, 1, 12);
 	}
 	month -= 1;
 	days += total_days_of_prev_months[month];
-- 
2.14.1

[PATCH AUTOSEL for 4.4 075/101] rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks

[Sasha Levin]

From: Moritz Fischer <mdf@kernel.org>

[ Upstream commit 453d0744f6c6ca3f9749b8c57c2e85b5b9f52514 ]

The issue is that the internal counter that triggers the watchdog reset
is actually running at 4096 Hz instead of 1Hz, therefore the value
given by userland (in sec) needs to be multiplied by 4096 to get the
correct behavior.

Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/rtc-ds1374.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 3b3049c8c9e0..5b5bc7dc3a1c 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -527,6 +527,10 @@ static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (get_user(new_margin, (int __user *)arg))
 			return -EFAULT;
 
+		/* the hardware's tick rate is 4096 Hz, so
+		 * the counter value needs to be scaled accordingly
+		 */
+		new_margin <<= 12;
 		if (new_margin < 1 || new_margin > 16777216)
 			return -EINVAL;
 
@@ -535,7 +539,8 @@ static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
 		ds1374_wdt_ping();
 		/* fallthrough */
 	case WDIOC_GETTIMEOUT:
-		return put_user(wdt_margin, (int __user *)arg);
+		/* when returning ... inverse is true */
+		return put_user((wdt_margin >> 12), (int __user *)arg);
 	case WDIOC_SETOPTIONS:
 		if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
 			return -EFAULT;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 076/101] rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL

[Sasha Levin]

From: Moritz Fischer <mdf@kernel.org>

[ Upstream commit 538c08f4c89580fc644e2bc64e0a4b86c925da4e ]

The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls
through to the -EINVAL case. This is wrong since thew watchdog does
actually get stopped or started correctly.

Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/rtc-ds1374.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 5b5bc7dc3a1c..c0eb113588ff 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -548,14 +548,15 @@ static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (options & WDIOS_DISABLECARD) {
 			pr_info("disable watchdog\n");
 			ds1374_wdt_disable();
+			return 0;
 		}
 
 		if (options & WDIOS_ENABLECARD) {
 			pr_info("enable watchdog\n");
 			ds1374_wdt_settimeout(wdt_margin);
 			ds1374_wdt_ping();
+			return 0;
 		}
-
 		return -EINVAL;
 	}
 	return -ENOTTY;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 077/101] perf tests kmod-path: Don't fail if compressed modules aren't supported

[Sasha Levin]

From: Kim Phillips <kim.phillips@arm.com>

[ Upstream commit 805b151a1afd24414706a7f6ae275fbb9649be74 ]

__kmod_path__parse() uses is_supported_compression() to determine and
parse out compressed module file extensions.  On systems without zlib,
this test fails and __kmod_path__parse() continues to strcmp "ko" with
"gz".  Don't do this on those systems.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3c8a67f50a1e ("perf tools: Add kmod_path__parse function")
Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/tests/kmod-path.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/tests/kmod-path.c b/tools/perf/tests/kmod-path.c
index 08c433b4bf4f..25e80c02230b 100644
--- a/tools/perf/tests/kmod-path.c
+++ b/tools/perf/tests/kmod-path.c
@@ -60,6 +60,7 @@ int test__kmod_path__parse(void)
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_KERNEL, true);
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_USER, false);
 
+#ifdef HAVE_ZLIB_SUPPORT
 	/* path                alloc_name  alloc_ext   kmod  comp  name   ext */
 	T("/xxxx/xxxx/x.ko.gz", true     , true      , true, true, "[x]", "gz");
 	T("/xxxx/xxxx/x.ko.gz", false    , true      , true, true, NULL , "gz");
@@ -95,6 +96,7 @@ int test__kmod_path__parse(void)
 	M("x.ko.gz", PERF_RECORD_MISC_CPUMODE_UNKNOWN, true);
 	M("x.ko.gz", PERF_RECORD_MISC_KERNEL, true);
 	M("x.ko.gz", PERF_RECORD_MISC_USER, false);
+#endif
 
 	/* path            alloc_name  alloc_ext  kmod  comp   name             ext */
 	T("[test_module]", true      , true     , true, false, "[test_module]", NULL);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 079/101] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt

[Sasha Levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ]

_channel_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference. Fix this by moving the pointer dereference
after _channel_ has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 8490a65ae1c6..a43404cad3e3 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -83,7 +83,7 @@ static void c8sectpfe_timer_interrupt(unsigned long ac8sectpfei)
 static void channel_swdemux_tsklet(unsigned long data)
 {
 	struct channel_info *channel = (struct channel_info *)data;
-	struct c8sectpfei *fei = channel->fei;
+	struct c8sectpfei *fei;
 	unsigned long wp, rp;
 	int pos, num_packets, n, size;
 	u8 *buf;
@@ -91,6 +91,8 @@ static void channel_swdemux_tsklet(unsigned long data)
 	if (unlikely(!channel || !channel->irec))
 		return;
 
+	fei = channel->fei;
+
 	wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0));
 	rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0));
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 078/101] Bluetooth: hci_qca: Avoid setup failure on missing rampatch

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ]

Assuming that the original code idea was to enable in-band sleeping
only if the setup_rome method returns succes and run in 'standard'
mode otherwise, we should not return setup_rome return value which
makes qca_setup fail if no rampatch/nvm file found.

This fixes BT issue on the dragonboard-820C p4 which includes the
following QCA controller:
hci0: Product:0x00000008
hci0: Patch  :0x00000111
hci0: ROM    :0x00000302
hci0: SOC    :0x00000044

Since there is no rampatch for this controller revision, just make
it work as is.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/bluetooth/hci_qca.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 71325e443e46..8a3bf0a8c31d 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -936,6 +936,9 @@ static int qca_setup(struct hci_uart *hu)
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		ret = 0;
 	}
 
 	/* Setup bdaddr */
-- 
2.14.1

[PATCH AUTOSEL for 4.4 080/101] drm/msm: fix leak in failed get_pages

[Sasha Levin]

From: Prakash Kamliya <pkamliya@codeaurora.org>

[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]

get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.

Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/msm/msm_gem.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index c76cc853b08a..644faf3ae93a 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -89,14 +89,17 @@ static struct page **get_pages(struct drm_gem_object *obj)
 			return p;
 		}
 
+		msm_obj->pages = p;
+
 		msm_obj->sgt = drm_prime_pages_to_sg(p, npages);
 		if (IS_ERR(msm_obj->sgt)) {
+			void *ptr = ERR_CAST(msm_obj->sgt);
+
 			dev_err(dev->dev, "failed to allocate sgt\n");
-			return ERR_CAST(msm_obj->sgt);
+			msm_obj->sgt = NULL;
+			return ptr;
 		}
 
-		msm_obj->pages = p;
-
 		/* For non-cached buffers, ensure the new pages are clean
 		 * because display controller, GPU, etc. are not coherent:
 		 */
@@ -119,7 +122,10 @@ static void put_pages(struct drm_gem_object *obj)
 		if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
 			dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl,
 					msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
-		sg_free_table(msm_obj->sgt);
+
+		if (msm_obj->sgt)
+			sg_free_table(msm_obj->sgt);
+
 		kfree(msm_obj->sgt);
 
 		if (use_pages(obj))
-- 
2.14.1

[PATCH AUTOSEL for 4.4 081/101] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 302d6424e4a293a5761997e6c9fc3dfb1e4c355f ]

With gcc-4.1.2:

    drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’:
    drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function

Indeed, if nl_client is not found in any of the scanned has buckets, ret
will be used uninitialized.

Preinitialize ret to -EINVAL to fix this.

Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/iwpm_util.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c
index fb43a242847b..8d7d110d0721 100644
--- a/drivers/infiniband/core/iwpm_util.c
+++ b/drivers/infiniband/core/iwpm_util.c
@@ -663,6 +663,7 @@ int iwpm_send_mapinfo(u8 nl_client, int iwpm_pid)
 	}
 	skb_num++;
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
+	ret = -EINVAL;
 	for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 		hlist_for_each_entry(map_info, &iwpm_hash_bucket[i],
 				     hlist_node) {
-- 
2.14.1

[PATCH AUTOSEL for 4.4 083/101] media: bt8xx: Fix err 'bt878_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ]

This is odd to call 'pci_disable_device()' in an error path before a
coresponding successful 'pci_enable_device()'.

Return directly instead.

Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 8aa726651630..90fcccc05b56 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -422,8 +422,7 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	       bt878_num);
 	if (bt878_num >= BT878_MAX) {
 		printk(KERN_ERR "bt878: Too many devices inserted\n");
-		result = -ENOMEM;
-		goto fail0;
+		return -ENOMEM;
 	}
 	if (pci_enable_device(dev))
 		return -EIO;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 082/101] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

[Sasha Levin]

From: Tsang-Shian Lin <thlin@realtek.com>

[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/realtek/rtlwifi/pci.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index c48b7e8ee0d6..b51815eccdb3 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -1572,7 +1572,14 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
 				dev_kfree_skb_irq(skb);
 				ring->idx = (ring->idx + 1) % ring->entries;
 			}
+
+			if (rtlpriv->use_new_trx_flow) {
+				rtlpci->tx_ring[i].cur_tx_rp = 0;
+				rtlpci->tx_ring[i].cur_tx_wp = 0;
+			}
+
 			ring->idx = 0;
+			ring->entries = rtlpci->txringcount[i];
 		}
 	}
 	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 086/101] platform/chrome: Use proper protocol transfer function

[Sasha Levin]

From: Shawn Nematbakhsh <shawnn@chromium.org>

[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ]

pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had
one instance of these functions correct, but not the second, fall-back
case. We use the fall-back only when the first command returns an
IN_PROGRESS status, which is only used on some EC firmwares where we
don't want to constantly poll the bus, but instead back off and
sleep/retry for a little while.

Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton")
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/chrome/cros_ec_proto.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 92430f781eb7..a0b8c8a8c323 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -59,12 +59,14 @@ static int send_command(struct cros_ec_device *ec_dev,
 			struct cros_ec_command *msg)
 {
 	int ret;
+	int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg);
 
 	if (ec_dev->proto_version > 2)
-		ret = ec_dev->pkt_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->pkt_xfer;
 	else
-		ret = ec_dev->cmd_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->cmd_xfer;
 
+	ret = (*xfer_fxn)(ec_dev, msg);
 	if (msg->result == EC_RES_IN_PROGRESS) {
 		int i;
 		struct cros_ec_command *status_msg;
@@ -87,7 +89,7 @@ static int send_command(struct cros_ec_device *ec_dev,
 		for (i = 0; i < EC_COMMAND_RETRIES; i++) {
 			usleep_range(10000, 11000);
 
-			ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+			ret = (*xfer_fxn)(ec_dev, status_msg);
 			if (ret < 0)
 				break;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 085/101] cros_ec: fix nul-termination for firmware build info

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ]

As gcc-8 reports, we zero out the wrong byte:

drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version':
drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds]

This changes the code back to what it did before changing to a
zero-length array structure.

Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/chrome/cros_ec_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
index f3baf9973989..24f1630a8b3f 100644
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -187,7 +187,7 @@ static ssize_t show_ec_version(struct device *dev,
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    EC error %d\n", msg->result);
 	else {
-		msg->data[sizeof(msg->data) - 1] = '\0';
+		msg->data[EC_HOST_PARAM_SIZE - 1] = '\0';
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    %s\n", msg->data);
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.4 084/101] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart

[Sasha Levin]

From: Ron Economos <w6rz@comcast.net>

[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ]

On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.

Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.

Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/dvb-frontends/si2168.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
index 821a8f481507..9d6270591858 100644
--- a/drivers/media/dvb-frontends/si2168.c
+++ b/drivers/media/dvb-frontends/si2168.c
@@ -14,6 +14,8 @@
  *    GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
+
 #include "si2168_priv.h"
 
 static const struct dvb_frontend_ops si2168_ops;
@@ -420,6 +422,7 @@ static int si2168_init(struct dvb_frontend *fe)
 		if (ret)
 			goto err;
 
+		udelay(100);
 		memcpy(cmd.args, "\x85", 1);
 		cmd.wlen = 1;
 		cmd.rlen = 1;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 087/101] mmc: avoid removing non-removable hosts during suspend

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit de8dcc3d2c0e08e5068ee1e26fc46415c15e3637 ]

The Weibu F3C MiniPC has an onboard AP6255 module, presenting
two SDIO functions on a single MMC host (Bluetooth/btsdio and
WiFi/brcmfmac), and the mmc layer correctly detects this as
non-removable.

After suspend/resume, the wifi and bluetooth interfaces disappear
and do not get probed again.

The conditions here are:

 1. During suspend, we reach mmc_pm_notify()

 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can
    suspend the SDIO host. However, mmc_sdio_pre_suspend() returns
    -ENOSYS because btsdio_driver does not have a suspend method.

 3. mmc_pm_notify() proceeds to remove the card

 4. Upon resume, mmc_rescan() does nothing with this host, because of
    the rescan_entered check which aims to only scan a non-removable
    device a single time (i.e. during boot).

Fix the loss of functionality by detecting that we are unable to
suspend a non-removable host, so avoid the forced removal in that
case. The comment above this function already indicates that this
code was only intended for removable devices.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/core/core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 5f7d10ba498a..299a83f1ad38 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2791,6 +2791,14 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 		if (!err)
 			break;
 
+		if (!mmc_card_is_removable(host)) {
+			dev_warn(mmc_dev(host),
+				 "pre_suspend failed for non-removable host: "
+				 "%d\n", err);
+			/* Avoid removing non-removable hosts */
+			break;
+		}
+
 		/* Calling bus_ops->remove() with a claimed host can deadlock */
 		host->bus_ops->remove(host);
 		mmc_claim_host(host);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 088/101] IB/ipoib: Avoid memory leak if the SA returns a different DGID

[Sasha Levin]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ]

The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.

Ensure the database key does not change after the SA query completes.

Demonstration of the bug is as  follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib  will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index bad76eed06b3..f34aaef07fea 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -724,6 +724,22 @@ static void path_rec_completion(int status,
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!IS_ERR_OR_NULL(ah)) {
+		/*
+		 * pathrec.dgid is used as the database key from the LLADDR,
+		 * it must remain unchanged even if the SA returns a different
+		 * GID to use in the AH.
+		 */
+		if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			   sizeof(union ib_gid))) {
+			ipoib_dbg(
+				priv,
+				"%s got PathRec for gid %pI6 while asked for %pI6\n",
+				dev->name, pathrec->dgid.raw,
+				path->pathrec.dgid.raw);
+			memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			       sizeof(union ib_gid));
+		}
+
 		path->pathrec = *pathrec;
 
 		old_ah   = path->ah;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 090/101] IB/umem: Fix use of npages/nmap fields

[Sasha Levin]

From: Artemy Kovalyov <artemyko@mellanox.com>

[ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ]

In ib_umem structure npages holds original number of sg entries, while
nmap is number of DMA blocks returned by dma_map_sg.

Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/umem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 0ae337bec4f2..6790ebb366dd 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -354,7 +354,7 @@ int ib_umem_copy_from(void *dst, struct ib_umem *umem, size_t offset,
 		return -EINVAL;
 	}
 
-	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->nmap, dst, length,
+	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->npages, dst, length,
 				 offset + ib_umem_offset(umem));
 
 	if (ret < 0)
-- 
2.14.1

[PATCH AUTOSEL for 4.4 089/101] RDMA/cma: Use correct size when writing netlink stats

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 7baaa49af3716fb31877c61f59b74d029ce15b75 ]

The code was using the src size when formatting the dst. They are almost
certainly the same value but it reads wrong.

Fixes: ce117ffac2e9 ("RDMA/cma: Export AF_IB statistics")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index b6c9a370a38b..be5a407444f1 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4007,7 +4007,7 @@ static int cma_get_id_stats(struct sk_buff *skb, struct netlink_callback *cb)
 					  RDMA_NL_RDMA_CM_ATTR_SRC_ADDR))
 				goto out;
 			if (ibnl_put_attr(skb, nlh,
-					  rdma_addr_size(cma_src_addr(id_priv)),
+					  rdma_addr_size(cma_dst_addr(id_priv)),
 					  cma_dst_addr(id_priv),
 					  RDMA_NL_RDMA_CM_ATTR_DST_ADDR))
 				goto out;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 091/101] vgacon: Set VGA struct resource types

[Sasha Levin]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit c82084117f79bcae085e40da526253736a247120 ]

Set the resource type when we reserve VGA-related I/O port resources.

The resource code doesn't actually look at the type, so it inserts
resources without a type in the tree correctly even without this change.
But if we ever print a resource without a type, it looks like this:

  vga+ [??? 0x000003c0-0x000003df flags 0x0]

Setting the type means it will be printed correctly as:

  vga+ [io  0x000003c0-0x000003df]

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/alpha/kernel/console.c    |  1 +
 drivers/video/console/vgacon.c | 34 ++++++++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 6a61deed4a85..ab228ed45945 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -20,6 +20,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 517f565b65d7..598ec7545e84 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -409,7 +409,10 @@ static const char *vgacon_startup(void)
 		vga_video_port_val = VGA_CRT_DM;
 		if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) {
 			static struct resource ega_console_resource =
-			    { .name = "ega", .start = 0x3B0, .end = 0x3BF };
+			    { .name	= "ega",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_EGAM;
 			vga_vram_size = 0x8000;
 			display_desc = "EGA+";
@@ -417,9 +420,15 @@ static const char *vgacon_startup(void)
 					 &ega_console_resource);
 		} else {
 			static struct resource mda1_console_resource =
-			    { .name = "mda", .start = 0x3B0, .end = 0x3BB };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BB };
 			static struct resource mda2_console_resource =
-			    { .name = "mda", .start = 0x3BF, .end = 0x3BF };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3BF,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_MDA;
 			vga_vram_size = 0x2000;
 			display_desc = "*MDA";
@@ -441,15 +450,21 @@ static const char *vgacon_startup(void)
 			vga_vram_size = 0x8000;
 
 			if (!screen_info.orig_video_isVGA) {
-				static struct resource ega_console_resource
-				    = { .name = "ega", .start = 0x3C0, .end = 0x3DF };
+				static struct resource ega_console_resource =
+				    { .name	= "ega",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_EGAC;
 				display_desc = "EGA";
 				request_resource(&ioport_resource,
 						 &ega_console_resource);
 			} else {
-				static struct resource vga_console_resource
-				    = { .name = "vga+", .start = 0x3C0, .end = 0x3DF };
+				static struct resource vga_console_resource =
+				    { .name	= "vga+",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_VGAC;
 				display_desc = "VGA+";
 				request_resource(&ioport_resource,
@@ -493,7 +508,10 @@ static const char *vgacon_startup(void)
 			}
 		} else {
 			static struct resource cga_console_resource =
-			    { .name = "cga", .start = 0x3D4, .end = 0x3D5 };
+			    { .name	= "cga",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3D4,
+			      .end	= 0x3D5 };
 			vga_video_type = VIDEO_TYPE_CGA;
 			vga_vram_size = 0x2000;
 			display_desc = "*CGA";
-- 
2.14.1

[PATCH AUTOSEL for 4.4 092/101] drm/omap: DMM: Check for DMM readiness after successful transaction commit

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ]

Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.

The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index f516b5891932..083db3f5181f 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -288,7 +288,12 @@ static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
 				msecs_to_jiffies(100))) {
 			dev_err(dmm->dev, "timed out waiting for done\n");
 			ret = -ETIMEDOUT;
+			goto cleanup;
 		}
+
+		/* Check the engine status before continue */
+		ret = wait_status(engine, DMM_PATSTATUS_READY |
+				  DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
 	}
 
 cleanup:
-- 
2.14.1

[PATCH AUTOSEL for 4.4 093/101] pty: cancel pty slave port buf's work in tty_release

[Sasha Levin]

From: Sahara <keun-o.park@darkmatter.ae>

[ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ]

In case that CONFIG_SLUB_DEBUG is on and pty is used, races between
release_one_tty and flush_to_ldisc work threads may happen and lead
to use-after-free condition on tty->link->port. Because SLUB_DEBUG
is turned on, freed tty->link->port is filled with POISON_FREE value.
So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc
could return without a problem by checking if tty is NULL.

CPU 0                                 CPU 1
-----                                 -----
release_tty                           pty_write
   cancel_work_sync(tty)                 to = tty->link
   tty_kref_put(tty->link)               tty_schedule_flip(to->port)
      << workqueue >>                 ...
      release_one_tty                 ...
         pty_cleanup                  ...
            kfree(tty->link->port)       << workqueue >>
                                         flush_to_ldisc
                                            tty = READ_ONCE(port->itty)
                                            tty is 0x6b6b6b6b6b6b6b6b
                                            !!PANIC!! access tty->ldisc

 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93
 pgd = ffffffc0eb1c3000
 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000
 ------------[ cut here ]------------
 Kernel BUG at ffffff800851154c [verbose debug info unavailable]
 Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP
 CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G        W 3.18.31-g0a58eeb #1
 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT)
 Workqueue: events_unbound flush_to_ldisc
 task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000
 PC is at ldsem_down_read_trylock+0x0/0x4c
 LR is at tty_ldisc_ref+0x24/0x4c
 pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145
 sp : ffffffc0ed627cd0
 x29: ffffffc0ed627cd0 x28: 0000000000000000
 x27: ffffff8009e05000 x26: ffffffc0d382cfa0
 x25: 0000000000000000 x24: ffffff800a012f08
 x23: 0000000000000000 x22: ffffffc0703fbc88
 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93
 x19: 0000000000000000 x18: 0000000000000001
 x17: 00e80000f80d6f53 x16: 0000000000000001
 x15: 0000007f7d826fff x14: 00000000000000a0
 x13: 0000000000000000 x12: 0000000000000109
 x11: 0000000000000000 x10: 0000000000000000
 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580
 x7 : 0000000000000000 x6 : ffffff800a42e000
 x5 : 00000000000003fc x4 : 0000000003bd1201
 x3 : 0000000000000001 x2 : 0000000000000001
 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93

Signed-off-by: Sahara <keun-o.park@darkmatter.ae>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/tty_io.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 1bb629ab8ecc..a638c1738547 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1694,6 +1694,8 @@ static void release_tty(struct tty_struct *tty, int idx)
 	if (tty->link)
 		tty->link->port->itty = NULL;
 	tty_buffer_cancel_work(tty->port);
+	if (tty->link)
+		tty_buffer_cancel_work(tty->link->port);
 
 	tty_kref_put(tty->link);
 	tty_kref_put(tty);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 094/101] coresight: Fix disabling of CoreSight TPIU

[Sasha Levin]

From: Robert Walker <robert.walker@arm.com>

[ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ]

The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.

This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.

Signed-off-by: Robert Walker <robert.walker@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hwtracing/coresight/coresight-tpiu.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c
index 7214efd10db5..22e10b7d505d 100644
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -45,8 +45,11 @@
 #define TPIU_ITATBCTR0		0xef8
 
 /** register definition **/
+/* FFSR - 0x300 */
+#define FFSR_FT_STOPPED		BIT(1)
 /* FFCR - 0x304 */
 #define FFCR_FON_MAN		BIT(6)
+#define FFCR_STOP_FI		BIT(12)
 
 /**
  * @base:	memory mapped base address for this component.
@@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata)
 {
 	CS_UNLOCK(drvdata->base);
 
-	/* Clear formatter controle reg. */
-	writel_relaxed(0x0, drvdata->base + TPIU_FFCR);
+	/* Clear formatter and stop on flush */
+	writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR);
 	/* Generate manual flush */
-	writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	/* Wait for flush to complete */
+	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+	/* Wait for formatter to stop */
+	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
 
 	CS_LOCK(drvdata->base);
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.4 095/101] pinctrl: Really force states during suspend/resume

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a
"sleep" set of pins, and this particular platform suspends and resumes
in a way that the pin states are not preserved by the hardware, when we
resume, we would call pinctrl_single_resume() -> pinctrl_force_default()
-> pinctrl_select_state() and the first thing we do is check that the
pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from
pinctrl_select_state() and move it pinctrl_commit_state(), while keeping
the p->state == state check in pinctrl_select_state() not to change the
caller assumptions. pinctrl_force_sleep() and pinctrl_force_default()
are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij]
The forced pin control states are currently only used in some pin
controller drivers that grab their own reference to their own pins.
This is equal to the pin control hogs: pins taken by pin control
devices since there are no corresponding device in the Linux device
hierarchy, such as memory controller lines or unused GPIO lines,
or GPIO lines that are used orthogonally from the GPIO subsystem
but pincontrol-wise managed as hogs (non-strict mode, allowing
simultaneous use by GPIO and pin control). For this case forcing
the state from the drivers' suspend()/resume() callbacks makes
sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/core.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 2686a4450dfc..f4639a9f1e48 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -979,19 +979,16 @@ struct pinctrl_state *pinctrl_lookup_state(struct pinctrl *p,
 EXPORT_SYMBOL_GPL(pinctrl_lookup_state);
 
 /**
- * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * pinctrl_commit_state() - select/activate/program a pinctrl state to HW
  * @p: the pinctrl handle for the device that requests configuration
  * @state: the state handle to select/activate/program
  */
-int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state)
 {
 	struct pinctrl_setting *setting, *setting2;
 	struct pinctrl_state *old_state = p->state;
 	int ret;
 
-	if (p->state == state)
-		return 0;
-
 	if (p->state) {
 		/*
 		 * For each pinmux setting in the old state, forget SW's record
@@ -1055,6 +1052,19 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
 
 	return ret;
 }
+
+/**
+ * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * @p: the pinctrl handle for the device that requests configuration
+ * @state: the state handle to select/activate/program
+ */
+int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+{
+	if (p->state == state)
+		return 0;
+
+	return pinctrl_commit_state(p, state);
+}
 EXPORT_SYMBOL_GPL(pinctrl_select_state);
 
 static void devm_pinctrl_release(struct device *dev, void *res)
@@ -1223,7 +1233,7 @@ void pinctrl_unregister_map(struct pinctrl_map const *map)
 int pinctrl_force_sleep(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_sleep);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_sleep);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
@@ -1235,7 +1245,7 @@ EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
 int pinctrl_force_default(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_default);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_default);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_default);
-- 
2.14.1

[PATCH AUTOSEL for 4.4 097/101] ip6_vti: adjust vti mtu according to mtu of lower device

[Sasha Levin]

From: Alexey Kodanev <alexey.kodanev@oracle.com>

[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ]

LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().

In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.

The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().

Here is the example when the lower device MTU is set to 9000:

  # ip a sh ltp_ns_veth2
      ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
        inet 10.0.0.2/24 scope global ltp_ns_veth2
        inet6 fd00::2/64 scope global

  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
        link/tunnel6 fd00::2 peer fd00::1

After the patch:
  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
        link/tunnel6 fd00::2 peer fd00::1

Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/ip6_vti.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index d7105422bc63..e4b0fb2f06a3 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -614,6 +614,7 @@ static void vti6_link_config(struct ip6_tnl *t)
 {
 	struct net_device *dev = t->dev;
 	struct __ip6_tnl_parm *p = &t->parms;
+	struct net_device *tdev = NULL;
 
 	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
 	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -626,6 +627,25 @@ static void vti6_link_config(struct ip6_tnl *t)
 		dev->flags |= IFF_POINTOPOINT;
 	else
 		dev->flags &= ~IFF_POINTOPOINT;
+
+	if (p->flags & IP6_TNL_F_CAP_XMIT) {
+		int strict = (ipv6_addr_type(&p->raddr) &
+			      (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
+		struct rt6_info *rt = rt6_lookup(t->net,
+						 &p->raddr, &p->laddr,
+						 p->link, strict);
+
+		if (rt)
+			tdev = rt->dst.dev;
+		ip6_rt_put(rt);
+	}
+
+	if (!tdev && p->link)
+		tdev = __dev_get_by_index(t->net, p->link);
+
+	if (tdev)
+		dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len,
+				 IPV6_MIN_MTU);
 }
 
 /**
-- 
2.14.1

[PATCH AUTOSEL for 4.4 096/101] iommu/vt-d: clean up pr_irq if request_threaded_irq fails

[Sasha Levin]

From: Jerry Snitselaar <jsnitsel@redhat.com>

[ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ]

It is unlikely request_threaded_irq will fail, but if it does for some
reason we should clear iommu->pr_irq in the error path. Also
intel_svm_finish_prq shouldn't try to clean up the page request
interrupt if pr_irq is 0. Without these, if request_threaded_irq were
to fail the following occurs:

fail with no fixes:

[    0.683147] ------------[ cut here ]------------
[    0.683148] NULL pointer, cannot free irq
[    0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140
[    0.683160] Modules linked in:
[    0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3
[    0.683165] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140
[    0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292
[    0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8
[    0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246
[    0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c
[    0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a
[    0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000
[    0.683178] FS:  0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000
[    0.683180] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.683182] Call Trace:
[    0.683189]  intel_svm_finish_prq+0x3c/0x60
[    0.683191]  free_dmar_iommu+0x1ac/0x1b0
[    0.683195]  init_dmars+0xaaa/0xaea
[    0.683200]  ? klist_next+0x19/0xc0
[    0.683203]  ? pci_do_find_bus+0x50/0x50
[    0.683205]  ? pci_get_dev_by_id+0x52/0x70
[    0.683208]  intel_iommu_init+0x498/0x5c7
[    0.683211]  pci_iommu_init+0x13/0x3c
[    0.683214]  ? e820__memblock_setup+0x61/0x61
[    0.683217]  do_one_initcall+0x4d/0x1a0
[    0.683220]  kernel_init_freeable+0x186/0x20e
[    0.683222]  ? set_debug_rodata+0x11/0x11
[    0.683225]  ? rest_init+0xb0/0xb0
[    0.683226]  kernel_init+0xa/0xff
[    0.683229]  ret_from_fork+0x1f/0x30
[    0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5
e c3 0f 1f 44 00 00 66 2e 0f 1f 84
[    0.683285] ---[ end trace f7650e42792627ca ]---

with iommu->pr_irq = 0, but no check in intel_svm_finish_prq:

[    0.669561] ------------[ cut here ]------------
[    0.669563] Trying to free already-free IRQ 0
[    0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0
[    0.669574] Modules linked in:
[    0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4
[    0.669579] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.669581] RIP: 0010:__free_irq+0xa4/0x2c0
[    0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082
[    0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8
[    0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046
[    0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c
[    0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960
[    0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600
[    0.669593] FS:  0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000
[    0.669594] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.669602] Call Trace:
[    0.669616]  free_irq+0x30/0x60
[    0.669620]  intel_svm_finish_prq+0x34/0x60
[    0.669623]  free_dmar_iommu+0x1ac/0x1b0
[    0.669627]  init_dmars+0xaaa/0xaea
[    0.669631]  ? klist_next+0x19/0xc0
[    0.669634]  ? pci_do_find_bus+0x50/0x50
[    0.669637]  ? pci_get_dev_by_id+0x52/0x70
[    0.669639]  intel_iommu_init+0x498/0x5c7
[    0.669642]  pci_iommu_init+0x13/0x3c
[    0.669645]  ? e820__memblock_setup+0x61/0x61
[    0.669648]  do_one_initcall+0x4d/0x1a0
[    0.669651]  kernel_init_freeable+0x186/0x20e
[    0.669653]  ? set_debug_rodata+0x11/0x11
[    0.669656]  ? rest_init+0xb0/0xb0
[    0.669658]  kernel_init+0xa/0xff
[    0.669661]  ret_from_fork+0x1f/0x30
[    0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e
8 0e 4c 68 00 49 8b 46 40 48 8b 80
[    0.669688] ---[ end trace 58a470248700f2fc ]---

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/intel-svm.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index f929879ecae6..a7d516f973dd 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -127,6 +127,7 @@ int intel_svm_enable_prq(struct intel_iommu *iommu)
 		pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n",
 		       iommu->name);
 		dmar_free_hwirq(irq);
+		iommu->pr_irq = 0;
 		goto err;
 	}
 	dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL);
@@ -142,9 +143,11 @@ int intel_svm_finish_prq(struct intel_iommu *iommu)
 	dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL);
 	dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL);
 
-	free_irq(iommu->pr_irq, iommu);
-	dmar_free_hwirq(iommu->pr_irq);
-	iommu->pr_irq = 0;
+	if (iommu->pr_irq) {
+		free_irq(iommu->pr_irq, iommu);
+		dmar_free_hwirq(iommu->pr_irq);
+		iommu->pr_irq = 0;
+	}
 
 	free_pages((unsigned long)iommu->prq, PRQ_ORDER);
 	iommu->prq = NULL;
-- 
2.14.1

[PATCH AUTOSEL for 4.4 099/101] nfsd4: permit layoutget of executable-only files

[Sasha Levin]

From: Benjamin Coddington <bcodding@redhat.com>

[ Upstream commit 66282ec1cf004c09083c29cb5e49019037937bbd ]

Clients must be able to read a file in order to execute it, and for pNFS
that means the client needs to be able to perform a LAYOUTGET on the file.

This behavior for executable-only files was added for OPEN in commit
a043226bc140 "nfsd4: permit read opens of executable-only files".

This fixes up xfstests generic/126 on block/scsi layouts.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfsd/nfs4proc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 209dbfc50cd4..bfbee8ddf978 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1245,14 +1245,14 @@ nfsd4_layoutget(struct svc_rqst *rqstp,
 	const struct nfsd4_layout_ops *ops;
 	struct nfs4_layout_stateid *ls;
 	__be32 nfserr;
-	int accmode;
+	int accmode = NFSD_MAY_READ_IF_EXEC;
 
 	switch (lgp->lg_seg.iomode) {
 	case IOMODE_READ:
-		accmode = NFSD_MAY_READ;
+		accmode |= NFSD_MAY_READ;
 		break;
 	case IOMODE_RW:
-		accmode = NFSD_MAY_READ | NFSD_MAY_WRITE;
+		accmode |= NFSD_MAY_READ | NFSD_MAY_WRITE;
 		break;
 	default:
 		dprintk("%s: invalid iomode %d\n",
-- 
2.14.1

[PATCH AUTOSEL for 4.4 098/101] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 744820869166c8c78be891240cf5f66e8a333694 ]

Debugfs file reset_stats is created with S_IRUSR permissions,
but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS,
whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS.

The patch fixes misstype with permissions.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/ocrdma/ocrdma_stats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
index 86c303a620c1..748b63b86cbc 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
@@ -834,7 +834,7 @@ void ocrdma_add_port_stats(struct ocrdma_dev *dev)
 
 	dev->reset_stats.type = OCRDMA_RESET_STATS;
 	dev->reset_stats.dev = dev;
-	if (!debugfs_create_file("reset_stats", S_IRUSR, dev->dir,
+	if (!debugfs_create_file("reset_stats", 0200, dev->dir,
 				&dev->reset_stats, &ocrdma_dbg_ops))
 		goto err;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.4 100/101] clk: si5351: Rename internal plls to avoid name collisions

[Sasha Levin]

From: Sergej Sawazki <sergej@taudac.com>

[ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ]

This drivers probe fails due to a clock name collision if a clock named
'plla' or 'pllb' is already registered when registering this drivers
internal plls.

Fix it by renaming internal plls to avoid name collisions.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk-si5351.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index e346b223199d..a01ee9a3ed6d 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -72,7 +72,7 @@ static const char * const si5351_input_names[] = {
 	"xtal", "clkin"
 };
 static const char * const si5351_pll_names[] = {
-	"plla", "pllb", "vxco"
+	"si5351_plla", "si5351_pllb", "si5351_vxco"
 };
 static const char * const si5351_msynth_names[] = {
 	"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
-- 
2.14.1

[PATCH AUTOSEL for 4.4 101/101] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit d087f15786021a9605b20f4c678312510be4cac1 ]

Register layout of a typical TPCC_EVT_MUX_M_N register is such that the
lowest numbered event is at the lowest byte address and highest numbered
event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is
different,  in that the lowest numbered event is at the highest address
and highest numbered event is at the lowest address. Therefore, modify
ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register
accordingly.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/ti-dma-crossbar.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 8100ede095d5..c7bd1c5315f4 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -51,7 +51,15 @@ struct ti_am335x_xbar_map {
 
 static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
 {
-	writeb_relaxed(val, iomem + event);
+	/*
+	 * TPCC_EVT_MUX_60_63 register layout is different than the
+	 * rest, in the sense, that event 63 is mapped to lowest byte
+	 * and event 60 is mapped to highest, handle it separately.
+	 */
+	if (event >= 60 && event <= 63)
+		writeb_relaxed(val, iomem + (63 - event % 4));
+	else
+		writeb_relaxed(val, iomem + event);
 }
 
 static void ti_am335x_xbar_free(struct device *dev, void *route_data)
-- 
2.14.1