[PATCH 3.18 00/25] 3.18.100-stable review

[PATCH 3.18 00/25] 3.18.100-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.100 release.
There are 25 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Mar 18 15:22:18 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.100-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.100-rc1

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    fixup: sctp: verify size of a new chunk in _sctp_make_chunk()

Nikola Ciprich <nikola.ciprich@linuxbox.cz>
    serial: 8250_pci: Add Brainboxes UC-260 4 port serial device

Pete Zaitcev <zaitcev@kotori.zaitcev.us>
    usb: usbmon: Read text within supplied buffer size

Julia Lawall <Julia.Lawall@lip6.fr>
    USB: usbmon: remove assignment from IS_ERR argument

Danilo Krummrich <danilokrummrich@dk-develop.de>
    usb: quirks: add control message delay for 1b1c:1b20

Joel Fernandes <joelaf@google.com>
    staging: android: ashmem: Fix lockdep issue during llseek

Oliver Neukum <oneukum@suse.com>
    uas: fix comparison for error code

Jonas Danielsson <jonas@orbital-systems.com>
    tty/serial: atmel: add new version check for usart

Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
    serial: sh-sci: prevent lockup on full TTY buffers

H.J. Lu <hjl.tools@gmail.com>
    x86: Treat R_X86_64_PLT32 as R_X86_64_PC32

Josh Poimboeuf <jpoimboe@redhat.com>
    x86/module: Detect and skip invalid relocations

Russell King <rmk+kernel@arm.linux.org.uk>
    scripts: recordmcount: break hardlinks

Clay McClure <clay@daemons.net>
    ubi: Fix race condition between ubi volume creation and udev

Florian Westphal <fw@strlen.de>
    netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt

Florian Westphal <fw@strlen.de>
    netfilter: bridge: ebt_among: add missing match size checks

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets

Eric Dumazet <edumazet@google.com>
    netfilter: IDLETIMER: be syzkaller friendly

Paolo Abeni <pabeni@redhat.com>
    netfilter: nat: cope with negative port range

Paolo Abeni <pabeni@redhat.com>
    netfilter: x_tables: fix missing timer initialization in xt_LED

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: More protection for concurrent write and ioctl races

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Don't allow resizing pool in use

Seunghun Han <kkamagui@gmail.com>
    x86/MCE: Serialize sysfs changes

Zhang Bo <zbsdta@126.com>
    Input: matrix_keypad - fix race when disabling interrupts

Justin Chen <justinpopo6@gmail.com>
    MIPS: BMIPS: Do not mask IPIs during suspend

himanshu.madhani@cavium.com <himanshu.madhani@cavium.com>
    scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS


-------------

Diffstat:

 Makefile                                 |   4 +-
 arch/mips/kernel/smp-bmips.c             |   8 +-
 arch/x86/kernel/cpu/mcheck/mce.c         |  22 +++++-
 arch/x86/kernel/machine_kexec_64.c       |   1 +
 arch/x86/kernel/module.c                 |  14 ++++
 arch/x86/tools/relocs.c                  |   3 +
 drivers/input/keyboard/matrix_keypad.c   |   4 +-
 drivers/mtd/ubi/vmt.c                    |  15 ++--
 drivers/scsi/qla2xxx/qla_init.c          |   1 +
 drivers/staging/android/ashmem.c         |  15 ++--
 drivers/tty/serial/8250/8250_pci.c       |  11 +++
 drivers/tty/serial/atmel_serial.c        |   1 +
 drivers/tty/serial/sh-sci.c              |   2 +
 drivers/usb/core/message.c               |   4 +
 drivers/usb/core/quirks.c                |   3 +-
 drivers/usb/mon/mon_text.c               | 124 +++++++++++++++++++------------
 drivers/usb/storage/uas.c                |   2 +-
 include/linux/usb/quirks.h               |   3 +
 net/bridge/netfilter/ebt_among.c         |  21 +++++-
 net/bridge/netfilter/ebtables.c          |  13 +++-
 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c |   4 +
 net/netfilter/nf_nat_proto_common.c      |   7 +-
 net/netfilter/xt_IDLETIMER.c             |   9 ++-
 net/netfilter/xt_LED.c                   |  12 +--
 net/sctp/sm_make_chunk.c                 |   2 +-
 scripts/recordmcount.c                   |  14 ++++
 sound/core/seq/seq_clientmgr.c           |  21 ++++--
 sound/core/seq/seq_fifo.c                |   2 +-
 sound/core/seq/seq_memory.c              |  14 +++-
 sound/core/seq/seq_memory.h              |   3 +-
 30 files changed, 262 insertions(+), 97 deletions(-)

[PATCH 3.18 01/25] scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: himanshu.madhani@cavium.com <himanshu.madhani@cavium.com>

commit 1514839b366417934e2f1328edb50ed1e8a719f5 upstream.

This patch fixes NULL pointer crash due to active timer running for abort
IOCB.

>>From crash dump analysis it was discoverd that get_next_timer_interrupt()
encountered a corrupted entry on the timer list.

 #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8
    [exception RIP: get_next_timer_interrupt+440]
    RIP: ffffffff90ea3088  RSP: ffff95e1f6f0fdf0  RFLAGS: 00010013
    RAX: ffff95e1f6451028  RBX: 000218e2389e5f40  RCX: 00000001232ad600
    RDX: 0000000000000001  RSI: ffff95e1f6f0fdf0  RDI: 0000000001232ad6
    RBP: ffff95e1f6f0fe40   R8: ffff95e1f6451188   R9: 0000000000000001
    R10: 0000000000000016  R11: 0000000000000016  R12: 00000001232ad5f6
    R13: ffff95e1f6450000  R14: ffff95e1f6f0fdf8  R15: ffff95e1f6f0fe10
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

Looking at the assembly of get_next_timer_interrupt(), address came
from %r8 (ffff95e1f6451188) which is pointing to list_head with single
entry at ffff95e5ff621178.

 0xffffffff90ea307a <get_next_timer_interrupt+426>:      mov    (%r8),%rdx
 0xffffffff90ea307d <get_next_timer_interrupt+429>:      cmp    %r8,%rdx
 0xffffffff90ea3080 <get_next_timer_interrupt+432>:      je     0xffffffff90ea30a7 <get_next_timer_interrupt+471>
 0xffffffff90ea3082 <get_next_timer_interrupt+434>:      nopw   0x0(%rax,%rax,1)
 0xffffffff90ea3088 <get_next_timer_interrupt+440>:      testb  $0x1,0x18(%rdx)

 crash> rd ffff95e1f6451188 10
 ffff95e1f6451188:  ffff95e5ff621178 ffff95e5ff621178   x.b.....x.b.....
 ffff95e1f6451198:  ffff95e1f6451198 ffff95e1f6451198   ..E.......E.....
 ffff95e1f64511a8:  ffff95e1f64511a8 ffff95e1f64511a8   ..E.......E.....
 ffff95e1f64511b8:  ffff95e77cf509a0 ffff95e77cf509a0   ...|.......|....
 ffff95e1f64511c8:  ffff95e1f64511c8 ffff95e1f64511c8   ..E.......E.....

 crash> rd ffff95e5ff621178 10
 ffff95e5ff621178:  0000000000000001 ffff95e15936aa00   ..........6Y....
 ffff95e5ff621188:  0000000000000000 00000000ffffffff   ................
 ffff95e5ff621198:  00000000000000a0 0000000000000010   ................
 ffff95e5ff6211a8:  ffff95e5ff621198 000000000000000c   ..b.............
 ffff95e5ff6211b8:  00000f5800000000 ffff95e751f8d720   ....X... ..Q....

 ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080.

 CACHE            NAME                 OBJSIZE  ALLOCATED     TOTAL  SLABS  SSIZE
 ffff95dc7fd74d00 mnt_cache                384      19785     24948    594    16k
   SLAB              MEMORY            NODE  TOTAL  ALLOCATED  FREE
   ffffdc5dabfd8800  ffff95e5ff620000     1     42         29    13
   FREE / [ALLOCATED]
    ffff95e5ff621080  (cpu 6 cache)

Examining the contents of that memory reveals a pointer to a constant string
in the driver, "abort\0", which is set by qla24xx_async_abort_cmd().

 crash> rd ffffffffc059277c 20
 ffffffffc059277c:  6e490074726f6261 0074707572726574   abort.Interrupt.
 ffffffffc059278c:  00676e696c6c6f50 6920726576697244   Polling.Driver i
 ffffffffc059279c:  646f6d207325206e 6974736554000a65   n %s mode..Testi
 ffffffffc05927ac:  636976656420676e 786c252074612065   ng device at %lx
 ffffffffc05927bc:  6b63656843000a2e 646f727020676e69   ...Checking prod
 ffffffffc05927cc:  6f20444920746375 0a2e706968632066   uct ID of chip..
 ffffffffc05927dc:  5120646e756f4600 204130303232414c   .Found QLA2200A
 ffffffffc05927ec:  43000a2e70696843 20676e696b636568   Chip...Checking
 ffffffffc05927fc:  65786f626c69616d 6c636e69000a2e73   mailboxes...incl
 ffffffffc059280c:  756e696c2f656475 616d2d616d642f78   ude/linux/dma-ma

 crash> struct -ox srb_iocb
 struct srb_iocb {
           union {
               struct {...} logio;
               struct {...} els_logo;
               struct {...} tmf;
               struct {...} fxiocb;
               struct {...} abt;
               struct ct_arg ctarg;
               struct {...} mbx;
               struct {...} nack;
    [0x0 ] } u;
    [0xb8] struct timer_list timer;
    [0x108] void (*timeout)(void *);
 }
 SIZE: 0x110

 crash> ! bc
 ibase=16
 obase=10
 B8+40
 F8

The object is a srb_t, and at offset 0xf8 within that structure
(i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list.

Cc: <stable@vger.kernel.org> #4.4+
Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_init.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -365,6 +365,7 @@ qla24xx_abort_sp_done(void *data, void *
 	srb_t *sp = (srb_t *)ptr;
 	struct srb_iocb *abt = &sp->u.iocb_cmd;
 
+	del_timer(&sp->u.iocb_cmd.timer);
 	complete(&abt->u.abt.comp);
 }
 

[PATCH 3.18 02/25] MIPS: BMIPS: Do not mask IPIs during suspend

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Chen <justinpopo6@gmail.com>

commit 06a3f0c9f2725f5d7c63c4203839373c9bd00c28 upstream.

Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an
issue where disable_irq did not actually disable the irq. The bug caused
our IPIs to not be disabled, which actually is the correct behavior.

With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs"), the IPIs were getting disabled going into suspend, thus
schedule_ipi() was not being called. This caused deadlocks where
schedulable task were not being scheduled and other cpus were waiting
for them to do something.

Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the
IPIs during suspend.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17385/
[jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs]
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/smp-bmips.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -159,11 +159,11 @@ static void bmips_prepare_cpus(unsigned
 		return;
 	}
 
-	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
-			"smp_ipi0", NULL))
+	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 		panic("Can't request IPI0 interrupt");
-	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
-			"smp_ipi1", NULL))
+	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 		panic("Can't request IPI1 interrupt");
 }
 

[PATCH 3.18 03/25] Input: matrix_keypad - fix race when disabling interrupts

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Bo <zbsdta@126.com>

commit ea4f7bd2aca9f68470e9aac0fc9432fd180b1fe7 upstream.

If matrix_keypad_stop() is executing and the keypad interrupt is triggered,
disable_row_irqs() may be called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time, causing interrupts to be disabled
twice and the keypad being "stuck" after resuming.

Take lock when setting keypad->stopped to ensure that ISR will not race
with matrix_keypad_stop() disabling interrupts.

Signed-off-by: Zhang Bo <zbsdta@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/keyboard/matrix_keypad.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -216,8 +216,10 @@ static void matrix_keypad_stop(struct in
 {
 	struct matrix_keypad *keypad = input_get_drvdata(dev);
 
+	spin_lock_irq(&keypad->lock);
 	keypad->stopped = true;
-	mb();
+	spin_unlock_irq(&keypad->lock);
+
 	flush_work(&keypad->work.work);
 	/*
 	 * matrix_keypad_scan() will leave IRQs enabled;

[PATCH 3.18 04/25] x86/MCE: Serialize sysfs changes

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seunghun Han <kkamagui@gmail.com>

commit b3b7c4795ccab5be71f080774c45bbbcc75c2aaf upstream.

The check_interval file in

  /sys/devices/system/machinecheck/machinecheck<cpu number>

directory is a global timer value for MCE polling. If it is changed by one
CPU, mce_restart() broadcasts the event to other CPUs to delete and restart
the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the
mce_timer variable.

If more than one CPU writes a specific value to the check_interval file
concurrently, mce_timer is not protected from such concurrent accesses and
all kinds of explosions happen. Since only root can write to those sysfs
variables, the issue is not a big deal security-wise.

However, concurrent writes to these configuration variables is void of
reason so the proper thing to do is to serialize the access with a mutex.

Boris:

 - Make store_int_with_restart() use device_store_ulong() to filter out
   negative intervals
 - Limit min interval to 1 second
 - Correct locking
 - Massage commit message

Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mcheck/mce.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -56,6 +56,9 @@ static DEFINE_MUTEX(mce_chrdev_read_mute
 			      rcu_read_lock_sched_held() || \
 			      lockdep_is_held(&mce_chrdev_read_mutex))
 
+/* sysfs synchronization */
+static DEFINE_MUTEX(mce_sysfs_mutex);
+
 #define CREATE_TRACE_POINTS
 #include <trace/events/mce.h>
 
@@ -2183,6 +2186,7 @@ static ssize_t set_ignore_ce(struct devi
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
+	mutex_lock(&mce_sysfs_mutex);
 	if (mca_cfg.ignore_ce ^ !!new) {
 		if (new) {
 			/* disable ce features */
@@ -2195,6 +2199,8 @@ static ssize_t set_ignore_ce(struct devi
 			on_each_cpu(mce_enable_ce, (void *)1, 1);
 		}
 	}
+	mutex_unlock(&mce_sysfs_mutex);
+
 	return size;
 }
 
@@ -2207,6 +2213,7 @@ static ssize_t set_cmci_disabled(struct
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
+	mutex_lock(&mce_sysfs_mutex);
 	if (mca_cfg.cmci_disabled ^ !!new) {
 		if (new) {
 			/* disable cmci */
@@ -2218,6 +2225,8 @@ static ssize_t set_cmci_disabled(struct
 			on_each_cpu(mce_enable_ce, NULL, 1);
 		}
 	}
+	mutex_unlock(&mce_sysfs_mutex);
+
 	return size;
 }
 
@@ -2225,8 +2234,19 @@ static ssize_t store_int_with_restart(st
 				      struct device_attribute *attr,
 				      const char *buf, size_t size)
 {
-	ssize_t ret = device_store_int(s, attr, buf, size);
+	unsigned long old_check_interval = check_interval;
+	ssize_t ret = device_store_ulong(s, attr, buf, size);
+
+	if (check_interval == old_check_interval)
+		return ret;
+
+	if (check_interval < 1)
+		check_interval = 1;
+
+	mutex_lock(&mce_sysfs_mutex);
 	mce_restart();
+	mutex_unlock(&mce_sysfs_mutex);
+
 	return ret;
 }
 

[PATCH 3.18 07/25] netfilter: x_tables: fix missing timer initialization in xt_LED

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream.

syzbot reported that xt_LED may try to use the ledinternal->timer
without previously initializing it:

------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline]
RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102
RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293
RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6
RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68
RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c
R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000
R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90
FS:  0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491
  ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633
  addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb
57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3
57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70
RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8
RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8
---[ end trace f661ab06f5dd8b3d ]---

The ledinternal struct can be shared between several different
xt_LED targets, but the related timer is currently initialized only
if the first target requires it. Fix it by unconditionally
initializing the timer struct.

v1 -> v2: call del_timer_sync() unconditionally, too.

Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target")
Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_LED.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/net/netfilter/xt_LED.c
+++ b/net/netfilter/xt_LED.c
@@ -141,10 +141,11 @@ static int led_tg_check(const struct xt_
 		goto exit_alloc;
 	}
 
-	/* See if we need to set up a timer */
-	if (ledinfo->delay > 0)
-		setup_timer(&ledinternal->timer, led_timeout_callback,
-			    (unsigned long)ledinternal);
+	/* Since the letinternal timer can be shared between multiple targets,
+	 * always set it up, even if the current target does not need it
+	 */
+	setup_timer(&ledinternal->timer, led_timeout_callback,
+		    (unsigned long)ledinternal);
 
 	list_add_tail(&ledinternal->list, &xt_led_triggers);
 
@@ -181,8 +182,7 @@ static void led_tg_destroy(const struct
 
 	list_del(&ledinternal->list);
 
-	if (ledinfo->delay > 0)
-		del_timer_sync(&ledinternal->timer);
+	del_timer_sync(&ledinternal->timer);
 
 	led_trigger_unregister(&ledinternal->netfilter_led_trigger);
 

[PATCH 3.18 08/25] netfilter: nat: cope with negative port range

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream.

syzbot reported a division by 0 bug in the netfilter nat code:

divide error: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88
RSP: 0018:ffff8801b2466778 EFLAGS: 00010246
RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c
RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac
RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900
R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153
R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c
FS:  00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30
  get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362
  nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406
  nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124
  redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41
  nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302
  nf_nat_ipv6_local_fn+0x33/0x5d0
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407
  ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook include/linux/netfilter.h:243 [inline]
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142
  dccp_connect+0x369/0x670 net/dccp/output.c:564
  dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946
  __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620
  inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684
  SYSC_connect+0x213/0x4a0 net/socket.c:1639
  SyS_connect+0x24/0x30 net/socket.c:1620
  do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x441c69
RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69
RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590
R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000
Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b
45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48
c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01
RIP: nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778

The problem is that currently we don't have any check on the
configured port range. A port range == -1 triggers the bug, while
other negative values may require a very long time to complete the
following loop.

This commit addresses the issue swapping the two ends on negative
ranges. The check is performed in nf_nat_l4proto_unique_tuple() since
the nft nat loads the port values from nft registers at runtime.

v1 -> v2: use the correct 'Fixes' tag
v2 -> v3: update commit message, drop unneeded READ_ONCE()

Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_nat_proto_common.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/netfilter/nf_nat_proto_common.c
+++ b/net/netfilter/nf_nat_proto_common.c
@@ -41,7 +41,7 @@ void nf_nat_l4proto_unique_tuple(const s
 				 const struct nf_conn *ct,
 				 u16 *rover)
 {
-	unsigned int range_size, min, i;
+	unsigned int range_size, min, max, i;
 	__be16 *portptr;
 	u_int16_t off;
 
@@ -71,7 +71,10 @@ void nf_nat_l4proto_unique_tuple(const s
 		}
 	} else {
 		min = ntohs(range->min_proto.all);
-		range_size = ntohs(range->max_proto.all) - min + 1;
+		max = ntohs(range->max_proto.all);
+		if (unlikely(max < min))
+			swap(max, min);
+		range_size = max - min + 1;
 	}
 
 	if (range->flags & NF_NAT_RANGE_PROTO_RANDOM) {

[PATCH 3.18 09/25] netfilter: IDLETIMER: be syzkaller friendly

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream.

We had one report from syzkaller [1]

First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.

Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.

[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 panic+0x1e4/0x41c kernel/panic.c:183
 __warn+0x1dc/0x200 kernel/panic.c:547
 report_bug+0x211/0x2d0 lib/bug.c:184
 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
 fixup_bug arch/x86/kernel/traps.c:247 [inline]
 do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
 queue_work include/linux/workqueue.h:488 [inline]
 schedule_work include/linux/workqueue.h:546 [inline]
 idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
 </IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378
 debug_object_init+0x17/0x20 lib/debugobjects.c:391
 __init_work+0x2b/0x60 kernel/workqueue.c:506
 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
 idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
 find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
 do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
 nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
 SYSC_setsockopt net/socket.c:1850 [inline]
 SyS_setsockopt+0x189/0x360 net/socket.c:1829
 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_IDLETIMER.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -146,11 +146,11 @@ static int idletimer_tg_create(struct id
 		    (unsigned long) info->timer);
 	info->timer->refcnt = 1;
 
+	INIT_WORK(&info->timer->work, idletimer_tg_work);
+
 	mod_timer(&info->timer->timer,
 		  msecs_to_jiffies(info->timeout * 1000) + jiffies);
 
-	INIT_WORK(&info->timer->work, idletimer_tg_work);
-
 	return 0;
 
 out_free_attr:
@@ -191,7 +191,10 @@ static int idletimer_tg_checkentry(const
 		pr_debug("timeout value is zero\n");
 		return -EINVAL;
 	}
-
+	if (info->timeout >= INT_MAX / 1000) {
+		pr_debug("timeout value is too big\n");
+		return -EINVAL;
+	}
 	if (info->label[0] == '\0' ||
 	    strnlen(info->label,
 		    MAX_IDLETIMER_LABEL_SIZE) == MAX_IDLETIMER_LABEL_SIZE) {

[PATCH 3.18 10/25] netfilter: ebtables: CONFIG_COMPAT: dont trust userland offsets

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream.

We need to make sure the offsets are not out of range of the
total size.
Also check that they are in ascending order.

The WARN_ON triggered by syzkaller (it sets panic_on_warn) is
changed to also bail out, no point in continuing parsing.

Briefly tested with simple ruleset of
-A INPUT --limit 1/s' --log
plus jump to custom chains using 32bit ebtables binary.

Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bridge/netfilter/ebtables.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -2019,7 +2019,9 @@ static int ebt_size_mwt(struct compat_eb
 		if (match_kern)
 			match_kern->match_size = ret;
 
-		WARN_ON(type == EBT_COMPAT_TARGET && size_left);
+		if (WARN_ON(type == EBT_COMPAT_TARGET && size_left))
+			return -EINVAL;
+
 		match32 = (struct compat_ebt_entry_mwt *) buf;
 	}
 
@@ -2076,6 +2078,15 @@ static int size_entry_mwt(struct ebt_ent
 	 *
 	 * offsets are relative to beginning of struct ebt_entry (i.e., 0).
 	 */
+	for (i = 0; i < 4 ; ++i) {
+		if (offsets[i] >= *total)
+			return -EINVAL;
+		if (i == 0)
+			continue;
+		if (offsets[i-1] > offsets[i])
+			return -EINVAL;
+	}
+
 	for (i = 0, j = 1 ; j < 4 ; j++, i++) {
 		struct compat_ebt_entry_mwt *match32;
 		unsigned int size;

[PATCH 3.18 11/25] netfilter: bridge: ebt_among: add missing match size checks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.

The module has such a check, but its only done after accessing
a structure that might be out of bounds.

tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe

Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bridge/netfilter/ebt_among.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/net/bridge/netfilter/ebt_among.c
+++ b/net/bridge/netfilter/ebt_among.c
@@ -172,18 +172,35 @@ ebt_among_mt(const struct sk_buff *skb,
 	return true;
 }
 
+static bool poolsize_invalid(const struct ebt_mac_wormhash *w)
+{
+	return w && w->poolsize >= (INT_MAX / sizeof(struct ebt_mac_wormhash_tuple));
+}
+
 static int ebt_among_mt_check(const struct xt_mtchk_param *par)
 {
 	const struct ebt_among_info *info = par->matchinfo;
 	const struct ebt_entry_match *em =
 		container_of(par->matchinfo, const struct ebt_entry_match, data);
-	int expected_length = sizeof(struct ebt_among_info);
+	unsigned int expected_length = sizeof(struct ebt_among_info);
 	const struct ebt_mac_wormhash *wh_dst, *wh_src;
 	int err;
 
+	if (expected_length > em->match_size)
+		return -EINVAL;
+
 	wh_dst = ebt_among_wh_dst(info);
-	wh_src = ebt_among_wh_src(info);
+	if (poolsize_invalid(wh_dst))
+		return -EINVAL;
+
 	expected_length += ebt_mac_wormhash_size(wh_dst);
+	if (expected_length > em->match_size)
+		return -EINVAL;
+
+	wh_src = ebt_among_wh_src(info);
+	if (poolsize_invalid(wh_src))
+		return -EINVAL;
+
 	expected_length += ebt_mac_wormhash_size(wh_src);
 
 	if (em->match_size != EBT_ALIGN(expected_length)) {

[PATCH 3.18 12/25] netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream.

l4proto->manip_pkt() can cause reallocation of skb head so pointer
to the ipv6 header must be reloaded.

Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com>
Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_nat_l3proto_ipv6.c
@@ -99,6 +99,10 @@ static bool nf_nat_ipv6_manip_pkt(struct
 	    !l4proto->manip_pkt(skb, &nf_nat_l3proto_ipv6, iphdroff, hdroff,
 				target, maniptype))
 		return false;
+
+	/* must reload, offset might have changed */
+	ipv6h = (void *)skb->data + iphdroff;
+
 manip_addr:
 	if (maniptype == NF_NAT_MANIP_SRC)
 		ipv6h->saddr = target->src.u3.in6;

[PATCH 3.18 13/25] ubi: Fix race condition between ubi volume creation and udev

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clay McClure <clay@daemons.net>

commit a51a0c8d213594bc094cb8e54aad0cb6d7f7b9a6 upstream.

Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi
device creation and udev"), we should make the volume active before
registering it.

Signed-off-by: Clay McClure <clay@daemons.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/ubi/vmt.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -308,6 +308,12 @@ int ubi_create_volume(struct ubi_device
 			vol->last_eb_bytes = vol->usable_leb_size;
 	}
 
+	/* Make volume "available" before it becomes accessible via sysfs */
+	spin_lock(&ubi->volumes_lock);
+	ubi->volumes[vol_id] = vol;
+	ubi->vol_count += 1;
+	spin_unlock(&ubi->volumes_lock);
+
 	/* Register character device for the volume */
 	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
 	vol->cdev.owner = THIS_MODULE;
@@ -350,11 +356,6 @@ int ubi_create_volume(struct ubi_device
 	if (err)
 		goto out_sysfs;
 
-	spin_lock(&ubi->volumes_lock);
-	ubi->volumes[vol_id] = vol;
-	ubi->vol_count += 1;
-	spin_unlock(&ubi->volumes_lock);
-
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
 	self_check_volumes(ubi);
 	return err;
@@ -374,6 +375,10 @@ out_sysfs:
 out_cdev:
 	cdev_del(&vol->cdev);
 out_mapping:
+	spin_lock(&ubi->volumes_lock);
+	ubi->volumes[vol_id] = NULL;
+	ubi->vol_count -= 1;
+	spin_unlock(&ubi->volumes_lock);
 	if (do_free)
 		kfree(vol->eba_tbl);
 out_acc:

[PATCH 3.18 14/25] scripts: recordmcount: break hardlinks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@arm.linux.org.uk>

commit dd39a26538e37f6c6131e829a4a510787e43c783 upstream.

recordmcount edits the file in-place, which can cause problems when
using ccache in hardlink mode.  Arrange for recordmcount to break a
hardlinked object.

Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk

Cc: stable@vger.kernel.org # 2.6.37+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/recordmcount.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -201,6 +201,20 @@ static void *mmap_file(char const *fname
 		addr = umalloc(sb.st_size);
 		uread(fd_map, addr, sb.st_size);
 	}
+	if (sb.st_nlink != 1) {
+		/* file is hard-linked, break the hard link */
+		close(fd_map);
+		if (unlink(fname) < 0) {
+			perror(fname);
+			fail_file();
+		}
+		fd_map = open(fname, O_RDWR | O_CREAT, sb.st_mode);
+		if (fd_map < 0) {
+			perror(fname);
+			fail_file();
+		}
+		uwrite(fd_map, addr, sb.st_size);
+	}
 	return addr;
 }
 

[PATCH 3.18 15/25] x86/module: Detect and skip invalid relocations

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit eda9cec4c9a12208a6f69fbe68f72a6311d50032 upstream.

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address.  This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand.  Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/module.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -167,19 +167,27 @@ int apply_relocate_add(Elf64_Shdr *sechd
 		case R_X86_64_NONE:
 			break;
 		case R_X86_64_64:
+			if (*(u64 *)loc != 0)
+				goto invalid_relocation;
 			*(u64 *)loc = val;
 			break;
 		case R_X86_64_32:
+			if (*(u32 *)loc != 0)
+				goto invalid_relocation;
 			*(u32 *)loc = val;
 			if (val != *(u32 *)loc)
 				goto overflow;
 			break;
 		case R_X86_64_32S:
+			if (*(s32 *)loc != 0)
+				goto invalid_relocation;
 			*(s32 *)loc = val;
 			if ((s64)val != *(s32 *)loc)
 				goto overflow;
 			break;
 		case R_X86_64_PC32:
+			if (*(u32 *)loc != 0)
+				goto invalid_relocation;
 			val -= (u64)loc;
 			*(u32 *)loc = val;
 #if 0
@@ -195,6 +203,11 @@ int apply_relocate_add(Elf64_Shdr *sechd
 	}
 	return 0;
 
+invalid_relocation:
+	pr_err("x86/modules: Skipping invalid relocation target, existing value is nonzero for type %d, loc %p, val %Lx\n",
+	       (int)ELF64_R_TYPE(rel[i].r_info), loc, val);
+	return -ENOEXEC;
+
 overflow:
 	pr_err("overflow in relocation type %d val %Lx\n",
 	       (int)ELF64_R_TYPE(rel[i].r_info), val);

[PATCH 3.18 16/25] x86: Treat R_X86_64_PLT32 as R_X86_64_PC32

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H.J. Lu <hjl.tools@gmail.com>

commit b21ebf2fb4cde1618915a97cc773e287ff49173e upstream.

On i386, there are 2 types of PLTs, PIC and non-PIC.  PIE and shared
objects must use PIC PLT.  To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first.  There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.

On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches.  Linker can always reduce
PLT32 relocation to PC32 if function is defined locally.   Local
functions should use PC32 relocation.  As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.

R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in
binutils master branch which will become binutils 2.31.

[ hjl is working on having better documentation on this all, but a few
  more notes from him:

   "PLT32 relocation is used as marker for PC-relative branches. Because
    of EBX, it looks odd to generate PLT32 relocation on i386 when EBX
    doesn't have GOT.

    As for symbol resolution, PLT32 and PC32 relocations are almost
    interchangeable. But when linker sees PLT32 relocation against a
    protected symbol, it can resolved locally at link-time since it is
    used on a branch instruction. Linker can't do that for PC32
    relocation"

  but for the kernel use, the two are basically the same, and this
  commit gets things building and working with the current binutils
  master   - Linus ]

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/machine_kexec_64.c |    1 +
 arch/x86/kernel/module.c           |    1 +
 arch/x86/tools/relocs.c            |    3 +++
 3 files changed, 5 insertions(+)

--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -516,6 +516,7 @@ int arch_kexec_apply_relocations_add(con
 				goto overflow;
 			break;
 		case R_X86_64_PC32:
+		case R_X86_64_PLT32:
 			value -= (u64)address;
 			*(u32 *)location = value;
 			break;
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -186,6 +186,7 @@ int apply_relocate_add(Elf64_Shdr *sechd
 				goto overflow;
 			break;
 		case R_X86_64_PC32:
+		case R_X86_64_PLT32:
 			if (*(u32 *)loc != 0)
 				goto invalid_relocation;
 			val -= (u64)loc;
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -769,9 +769,12 @@ static int do_reloc64(struct section *se
 		break;
 
 	case R_X86_64_PC32:
+	case R_X86_64_PLT32:
 		/*
 		 * PC relative relocations don't need to be adjusted unless
 		 * referencing a percpu symbol.
+		 *
+		 * NB: R_X86_64_PLT32 can be treated as R_X86_64_PC32.
 		 */
 		if (is_percpu_sym(sym, symname))
 			add_reloc(&relocs32neg, offset);

[PATCH 3.18 17/25] serial: sh-sci: prevent lockup on full TTY buffers

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream.

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/sh-sci.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -736,6 +736,8 @@ static void sci_receive_chars(struct uar
 		/* Tell the rest of the system the news. New characters! */
 		tty_flip_buffer_push(tport);
 	} else {
+		/* TTY buffers full; read from RX reg to prevent lockup */
+		serial_port_in(port, SCxRDR);
 		serial_port_in(port, SCxSR); /* dummy read */
 		serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
 	}

[PATCH 3.18 18/25] tty/serial: atmel: add new version check for usart

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Danielsson <jonas@orbital-systems.com>

commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream.

On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/atmel_serial.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1643,6 +1643,7 @@ static void atmel_get_ip_name(struct uar
 		switch (version) {
 		case 0x302:
 		case 0x10213:
+		case 0x10302:
 			dev_dbg(port->dev, "This version is usart\n");
 			atmel_port->is_usart = true;
 			break;

[PATCH 3.18 19/25] uas: fix comparison for error code

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream.

A typo broke the comparison.

Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/uas.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -1067,7 +1067,7 @@ static int uas_post_reset(struct usb_int
 		return 0;
 
 	err = uas_configure_endpoints(devinfo);
-	if (err && err != ENODEV)
+	if (err && err != -ENODEV)
 		shost_printk(KERN_ERR, shost,
 			     "%s: alloc streams error %d after reset",
 			     __func__, err);

[PATCH 3.18 20/25] staging: android: ashmem: Fix lockdep issue during llseek

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joel Fernandes <joelaf@google.com>

commit cb57469c9573f6018cd1302953dd45d6e05aba7b upstream.

ashmem_mutex create a chain of dependencies like so:

(1)
mmap syscall ->
  mmap_sem ->  (acquired)
  ashmem_mmap
  ashmem_mutex (try to acquire)
  (block)

(2)
llseek syscall ->
  ashmem_llseek ->
  ashmem_mutex ->  (acquired)
  inode_lock ->
  inode->i_rwsem (try to acquire)
  (block)

(3)
getdents ->
  iterate_dir ->
  inode_lock ->
  inode->i_rwsem   (acquired)
  copy_to_user ->
  mmap_sem         (try to acquire)

There is a lock ordering created between mmap_sem and inode->i_rwsem
causing a lockdep splat [2] during a syzcaller test, this patch fixes
the issue by unlocking the mutex earlier. Functionally that's Ok since
we don't need to protect vfs_llseek.

[1] https://patchwork.kernel.org/patch/10185031/
[2] https://lkml.org/lkml/2018/1/10/48

Acked-by: Todd Kjos <tkjos@google.com>
Cc: Arve Hjonnevag <arve@android.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ashmem.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -330,24 +330,23 @@ static loff_t ashmem_llseek(struct file
 	mutex_lock(&ashmem_mutex);
 
 	if (asma->size == 0) {
-		ret = -EINVAL;
-		goto out;
+		mutex_unlock(&ashmem_mutex);
+		return -EINVAL;
 	}
 
 	if (!asma->file) {
-		ret = -EBADF;
-		goto out;
+		mutex_unlock(&ashmem_mutex);
+		return -EBADF;
 	}
 
+	mutex_unlock(&ashmem_mutex);
+
 	ret = vfs_llseek(asma->file, offset, origin);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	/** Copy f_pos from backing file, since f_ops->llseek() sets it */
 	file->f_pos = asma->file->f_pos;
-
-out:
-	mutex_unlock(&ashmem_mutex);
 	return ret;
 }
 

[PATCH 3.18 21/25] usb: quirks: add control message delay for 1b1c:1b20

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danilo Krummrich <danilokrummrich@dk-develop.de>

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/message.c |    4 ++++
 drivers/usb/core/quirks.c  |    3 ++-
 include/linux/usb/quirks.h |    3 +++
 3 files changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -147,6 +147,10 @@ int usb_control_msg(struct usb_device *d
 
 	ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
 
+	/* Linger a bit, prior to the next control message. */
+	if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+		msleep(200);
+
 	kfree(dr);
 
 	return ret;
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -219,7 +219,8 @@ static const struct usb_device_id usb_qu
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
 	/* Corsair Strafe RGB */
-	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
 
 	/* Corsair K70 LUX */
 	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -56,4 +56,7 @@
  */
 #define USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL	BIT(11)
 
+/* Device needs a pause after every control message. */
+#define USB_QUIRK_DELAY_CTRL_MSG		BIT(13)
+
 #endif /* __LINUX_USB_QUIRKS_H */

[PATCH 3.18 22/25] USB: usbmon: remove assignment from IS_ERR argument

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julia Lawall <Julia.Lawall@lip6.fr>

commit 46c236dc7d1212d7417e6fb0317f91c44c719322 upstream.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2;
statement S1,S2;
@@

+e1 = e2;
if (IS_ERR(
    e1
-   = e2
   )) S1 else S2
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/mon/mon_text.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -386,7 +386,8 @@ static ssize_t mon_text_read_t(struct fi
 	struct mon_event_text *ep;
 	struct mon_text_ptr ptr;
 
-	if (IS_ERR(ep = mon_text_read_wait(rp, file)))
+	ep = mon_text_read_wait(rp, file);
+	if (IS_ERR(ep))
 		return PTR_ERR(ep);
 	mutex_lock(&rp->printf_lock);
 	ptr.cnt = 0;
@@ -413,7 +414,8 @@ static ssize_t mon_text_read_u(struct fi
 	struct mon_event_text *ep;
 	struct mon_text_ptr ptr;
 
-	if (IS_ERR(ep = mon_text_read_wait(rp, file)))
+	ep = mon_text_read_wait(rp, file);
+	if (IS_ERR(ep))
 		return PTR_ERR(ep);
 	mutex_lock(&rp->printf_lock);
 	ptr.cnt = 0;

[PATCH 3.18 23/25] usb: usbmon: Read text within supplied buffer size

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pete Zaitcev <zaitcev@kotori.zaitcev.us>

commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream.

This change fixes buffer overflows and silent data corruption with the
usbmon device driver text file read operations.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/mon/mon_text.c |  124 +++++++++++++++++++++++++++------------------
 1 file changed, 77 insertions(+), 47 deletions(-)

--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -82,6 +82,8 @@ struct mon_reader_text {
 
 	wait_queue_head_t wait;
 	int printf_size;
+	size_t printf_offset;
+	size_t printf_togo;
 	char *printf_buf;
 	struct mutex printf_lock;
 
@@ -373,75 +375,103 @@ err_alloc:
 	return rc;
 }
 
-/*
- * For simplicity, we read one record in one system call and throw out
- * what does not fit. This means that the following does not work:
- *   dd if=/dbg/usbmon/0t bs=10
- * Also, we do not allow seeks and do not bother advancing the offset.
- */
+static ssize_t mon_text_copy_to_user(struct mon_reader_text *rp,
+    char __user * const buf, const size_t nbytes)
+{
+	const size_t togo = min(nbytes, rp->printf_togo);
+
+	if (copy_to_user(buf, &rp->printf_buf[rp->printf_offset], togo))
+		return -EFAULT;
+	rp->printf_togo -= togo;
+	rp->printf_offset += togo;
+	return togo;
+}
+
+/* ppos is not advanced since the llseek operation is not permitted. */
 static ssize_t mon_text_read_t(struct file *file, char __user *buf,
-				size_t nbytes, loff_t *ppos)
+    size_t nbytes, loff_t *ppos)
 {
 	struct mon_reader_text *rp = file->private_data;
 	struct mon_event_text *ep;
 	struct mon_text_ptr ptr;
+	ssize_t ret;
 
-	ep = mon_text_read_wait(rp, file);
-	if (IS_ERR(ep))
-		return PTR_ERR(ep);
 	mutex_lock(&rp->printf_lock);
-	ptr.cnt = 0;
-	ptr.pbuf = rp->printf_buf;
-	ptr.limit = rp->printf_size;
-
-	mon_text_read_head_t(rp, &ptr, ep);
-	mon_text_read_statset(rp, &ptr, ep);
-	ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
-	    " %d", ep->length);
-	mon_text_read_data(rp, &ptr, ep);
 
-	if (copy_to_user(buf, rp->printf_buf, ptr.cnt))
-		ptr.cnt = -EFAULT;
+	if (rp->printf_togo == 0) {
+
+		ep = mon_text_read_wait(rp, file);
+		if (IS_ERR(ep)) {
+			mutex_unlock(&rp->printf_lock);
+			return PTR_ERR(ep);
+		}
+		ptr.cnt = 0;
+		ptr.pbuf = rp->printf_buf;
+		ptr.limit = rp->printf_size;
+
+		mon_text_read_head_t(rp, &ptr, ep);
+		mon_text_read_statset(rp, &ptr, ep);
+		ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+		    " %d", ep->length);
+		mon_text_read_data(rp, &ptr, ep);
+
+		rp->printf_togo = ptr.cnt;
+		rp->printf_offset = 0;
+
+		kmem_cache_free(rp->e_slab, ep);
+	}
+
+	ret = mon_text_copy_to_user(rp, buf, nbytes);
 	mutex_unlock(&rp->printf_lock);
-	kmem_cache_free(rp->e_slab, ep);
-	return ptr.cnt;
+	return ret;
 }
 
+/* ppos is not advanced since the llseek operation is not permitted. */
 static ssize_t mon_text_read_u(struct file *file, char __user *buf,
-				size_t nbytes, loff_t *ppos)
+    size_t nbytes, loff_t *ppos)
 {
 	struct mon_reader_text *rp = file->private_data;
 	struct mon_event_text *ep;
 	struct mon_text_ptr ptr;
+	ssize_t ret;
 
-	ep = mon_text_read_wait(rp, file);
-	if (IS_ERR(ep))
-		return PTR_ERR(ep);
 	mutex_lock(&rp->printf_lock);
-	ptr.cnt = 0;
-	ptr.pbuf = rp->printf_buf;
-	ptr.limit = rp->printf_size;
 
-	mon_text_read_head_u(rp, &ptr, ep);
-	if (ep->type == 'E') {
-		mon_text_read_statset(rp, &ptr, ep);
-	} else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
-		mon_text_read_isostat(rp, &ptr, ep);
-		mon_text_read_isodesc(rp, &ptr, ep);
-	} else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
-		mon_text_read_intstat(rp, &ptr, ep);
-	} else {
-		mon_text_read_statset(rp, &ptr, ep);
+	if (rp->printf_togo == 0) {
+
+		ep = mon_text_read_wait(rp, file);
+		if (IS_ERR(ep)) {
+			mutex_unlock(&rp->printf_lock);
+			return PTR_ERR(ep);
+		}
+		ptr.cnt = 0;
+		ptr.pbuf = rp->printf_buf;
+		ptr.limit = rp->printf_size;
+
+		mon_text_read_head_u(rp, &ptr, ep);
+		if (ep->type == 'E') {
+			mon_text_read_statset(rp, &ptr, ep);
+		} else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
+			mon_text_read_isostat(rp, &ptr, ep);
+			mon_text_read_isodesc(rp, &ptr, ep);
+		} else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
+			mon_text_read_intstat(rp, &ptr, ep);
+		} else {
+			mon_text_read_statset(rp, &ptr, ep);
+		}
+		ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+		    " %d", ep->length);
+		mon_text_read_data(rp, &ptr, ep);
+
+		rp->printf_togo = ptr.cnt;
+		rp->printf_offset = 0;
+
+		kmem_cache_free(rp->e_slab, ep);
 	}
-	ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
-	    " %d", ep->length);
-	mon_text_read_data(rp, &ptr, ep);
 
-	if (copy_to_user(buf, rp->printf_buf, ptr.cnt))
-		ptr.cnt = -EFAULT;
+	ret = mon_text_copy_to_user(rp, buf, nbytes);
 	mutex_unlock(&rp->printf_lock);
-	kmem_cache_free(rp->e_slab, ep);
-	return ptr.cnt;
+	return ret;
 }
 
 static struct mon_event_text *mon_text_read_wait(struct mon_reader_text *rp,

[PATCH 3.18 24/25] serial: 8250_pci: Add Brainboxes UC-260 4 port serial device

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikola Ciprich <nikola.ciprich@linuxbox.cz>

commit 9f2068f35729948bde84d87a40d135015911345d upstream.

Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -4982,6 +4982,17 @@ static struct pci_device_id serial_pci_t
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
 		pbn_b2_4_115200 },
 	/*
+	 * BrainBoxes UC-260
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0D21,
+		PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0E34,
+		PCI_ANY_ID, PCI_ANY_ID,
+		 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	/*
 	 * Perle PCI-RAS cards
 	 */
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,

[PATCH 3.18 25/25] fixup: sctp: verify size of a new chunk in _sctp_make_chunk()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ben writes:
> > +	int chunklen;
> > +
> > +	chunklen = sizeof(*chunk_hdr) + paylen;
> 
> I think this length still needs to be rounded up (with WORD_ROUND here,
> instead of SCTP_PAD4 upstream).

So here's a fix for this problem.


Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sctp/sm_make_chunk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1369,7 +1369,7 @@ static struct sctp_chunk *_sctp_make_chu
 	struct sock *sk;
 	int chunklen;
 
-	chunklen = sizeof(*chunk_hdr) + paylen;
+	chunklen = WORD_ROUND(sizeof(*chunk_hdr) + paylen);
 	if (chunklen > SCTP_MAX_CHUNK_LEN)
 		goto nodata;
 

Re: [PATCH 3.18 00/25] 3.18.100-stable review

[Guenter Roeck]

On 03/16/2018 08:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.100 release.
> There are 25 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Mar 18 15:22:18 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 137 pass: 137 fail: 0
Qemu test results:
	total: 119 pass: 119 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 3.18 00/25] 3.18.100-stable review

[Greg Kroah-Hartman]

On Fri, Mar 16, 2018 at 07:21:53PM +0000, Harsh Shandilya wrote:
> On Fri, 16 Mar, 2018, 8:53 PM Greg Kroah-Hartman, <
> gregkh@linuxfoundation.org> wrote:
> 
> > This is the start of the stable review cycle for the 3.18.100 release.
> > There are 25 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Mar 18 15:22:18 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >
> > https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.100-rc1.gz
> > or in the git tree and branch at:
> >         git://
> > git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > linux-3.18.y
> > and the diffstat can be found below.
> >
> 
> Builds and boots on the OnePlus 3T, no immediate issues noticed. Thanks for
> the update.

Thanks for testing and letting me know.

greg k-h