[PATCH AUTOSEL for 3.18 001/102] NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION

[PATCH AUTOSEL for 3.18 001/102] NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@primarydata.com>

[ Upstream commit 0048fdd06614a4ea088f9fcad11511956b795698 ]

If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we
are trunking, then RECLAIM_COMPLETE must handle that by calling
nfs4_schedule_session_recovery() and then retrying.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfs/nfs4proc.c  |  7 ++++++-
 fs/nfs/nfs4state.c | 10 +++++++---
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index f7957690ff20..321044c183f5 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7429,6 +7429,12 @@ static int nfs41_reclaim_complete_handle_errors(struct rpc_task *task, struct nf
 		/* fall through */
 	case -NFS4ERR_RETRY_UNCACHED_REP:
 		return -EAGAIN;
+	case -NFS4ERR_BADSESSION:
+	case -NFS4ERR_DEADSESSION:
+	case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
+		nfs4_schedule_session_recovery(clp->cl_session,
+				task->tk_status);
+		break;
 	default:
 		nfs4_schedule_lease_recovery(clp);
 	}
@@ -7507,7 +7513,6 @@ static int nfs41_proc_reclaim_complete(struct nfs_client *clp,
 	if (status == 0)
 		status = task->tk_status;
 	rpc_put_task(task);
-	return 0;
 out:
 	dprintk("<-- %s status=%d\n", __func__, status);
 	return status;
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index f471662c0a1f..972992b36660 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1563,13 +1563,14 @@ static void nfs4_state_start_reclaim_reboot(struct nfs_client *clp)
 	nfs4_state_mark_reclaim_helper(clp, nfs4_state_mark_reclaim_reboot);
 }
 
-static void nfs4_reclaim_complete(struct nfs_client *clp,
+static int nfs4_reclaim_complete(struct nfs_client *clp,
 				 const struct nfs4_state_recovery_ops *ops,
 				 struct rpc_cred *cred)
 {
 	/* Notify the server we're done reclaiming our state */
 	if (ops->reclaim_complete)
-		(void)ops->reclaim_complete(clp, cred);
+		return ops->reclaim_complete(clp, cred);
+	return 0;
 }
 
 static void nfs4_clear_reclaim_server(struct nfs_server *server)
@@ -1616,13 +1617,16 @@ static void nfs4_state_end_reclaim_reboot(struct nfs_client *clp)
 {
 	const struct nfs4_state_recovery_ops *ops;
 	struct rpc_cred *cred;
+	int err;
 
 	if (!nfs4_state_clear_reclaim_reboot(clp))
 		return;
 	ops = clp->cl_mvops->reboot_recovery_ops;
 	cred = nfs4_get_clid_cred(clp);
-	nfs4_reclaim_complete(clp, ops, cred);
+	err = nfs4_reclaim_complete(clp, ops, cred);
 	put_rpccred(cred);
+	if (err == -NFS4ERR_CONN_NOT_BOUND_TO_SESSION)
+		set_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state);
 }
 
 static void nfs_delegation_clear_all(struct nfs_client *clp)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 002/102] IB/srpt: Fix abort handling

[Sasha Levin]

From: Bart Van Assche <bart.vanassche@sandisk.com>

[ Upstream commit 55d694275f41a1c0eef4ef49044ff29bc3999490 ]

Let the target core check the CMD_T_ABORTED flag instead of the SRP
target driver. Hence remove the transport_check_aborted_status()
call. Since state == SRPT_STATE_CMD_RSP_SENT is something that really
should not happen, do not try to recover if srpt_queue_response() is
called for an I/O context that is in that state. This patch is a bug
fix because the srpt_abort_cmd() call is misplaced - if that function
is called from srpt_queue_response() it should either be called
before the command state is changed or after the response has been
sent.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 587311887d94..422e022dcbbb 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -2986,12 +2986,8 @@ static void srpt_queue_response(struct se_cmd *cmd)
 	}
 	spin_unlock_irqrestore(&ioctx->spinlock, flags);
 
-	if (unlikely(transport_check_aborted_status(&ioctx->cmd, false)
-		     || WARN_ON_ONCE(state == SRPT_STATE_CMD_RSP_SENT))) {
-		atomic_inc(&ch->req_lim_delta);
-		srpt_abort_cmd(ioctx);
+	if (unlikely(WARN_ON_ONCE(state == SRPT_STATE_CMD_RSP_SENT)))
 		return;
-	}
 
 	dir = ioctx->cmd.data_direction;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 003/102] af_key: Fix slab-out-of-bounds in pfkey_compile_policy.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit d90c902449a7561f1b1d58ba5a0d11728ce8b0b2 ]

The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.

Fixes: df71837d502 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/key/af_key.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index 65cce8ceaead..64dbf0dbe358 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3301,7 +3301,7 @@ static struct xfrm_policy *pfkey_compile_policy(struct sock *sk, int opt,
 		p += pol->sadb_x_policy_len*8;
 		sec_ctx = (struct sadb_x_sec_ctx *)p;
 		if (len < pol->sadb_x_policy_len*8 +
-		    sec_ctx->sadb_x_sec_len) {
+		    sec_ctx->sadb_x_sec_len*8) {
 			*dir = -EINVAL;
 			goto out;
 		}
-- 
2.14.1

[PATCH AUTOSEL for 3.18 004/102] mac80211: bail out from prep_connection() if a reconfig is ongoing

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit f8860ce836f2d502b07ef99559707fe55d90f5bc ]

If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state.  This ultimately causes an oops in the iwlwifi
driver (at least).

This fixes bugzilla 195299 partly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/mlme.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b13634c677f1..156e8e13ffed 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3995,6 +3995,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 	if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
 		return -EINVAL;
 
+	/* If a reconfig is happening, bail out */
+	if (local->in_reconfig)
+		return -EBUSY;
+
 	if (assoc) {
 		rcu_read_lock();
 		have_sta = sta_info_get(sdata, cbss->bssid);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 005/102] bna: Avoid reading past end of buffer

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ]

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 354ae9792bad..27651d26fb8a 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -2856,7 +2856,7 @@ bfa_ioc_get_adapter_optrom_ver(struct bfa_ioc *ioc, char *optrom_ver)
 static void
 bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc, char *manufacturer)
 {
-	memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
+	strncpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
 }
 
 static void
-- 
2.14.1

[PATCH AUTOSEL for 3.18 006/102] qlge: Avoid reading past end of buffer

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit df5303a8aa9a0a6934f4cea7427f1edf771f21c2 ]

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
index be258d90de9e..e3223f2fe2ff 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
@@ -765,7 +765,7 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump)
 		sizeof(struct mpi_coredump_global_header);
 	mpi_coredump->mpi_global_header.imageSize =
 		sizeof(struct ql_mpi_coredump);
-	memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+	strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
 		sizeof(mpi_coredump->mpi_global_header.idString));
 
 	/* Get generic NIC reg dump */
@@ -1255,7 +1255,7 @@ static void ql_gen_reg_dump(struct ql_adapter *qdev,
 		sizeof(struct mpi_coredump_global_header);
 	mpi_coredump->mpi_global_header.imageSize =
 		sizeof(struct ql_reg_dump);
-	memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+	strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
 		sizeof(mpi_coredump->mpi_global_header.idString));
 
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 007/102] net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]

When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.

Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.

Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 48645504106e..7503451a94f2 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -293,6 +293,10 @@ struct cpsw_ss_regs {
 /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */
 #define CPSW_V1_SEQ_ID_OFS_SHIFT	16
 
+#define CPSW_MAX_BLKS_TX		15
+#define CPSW_MAX_BLKS_TX_SHIFT		4
+#define CPSW_MAX_BLKS_RX		5
+
 struct cpsw_host_regs {
 	u32	max_blks;
 	u32	blk_cnt;
@@ -1120,11 +1124,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 	switch (priv->version) {
 	case CPSW_VERSION_1:
 		slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
+		/* Increase RX FIFO size to 5 for supporting fullduplex
+		 * flow control mode
+		 */
+		slave_write(slave,
+			    (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+			    CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS);
 		break;
 	case CPSW_VERSION_2:
 	case CPSW_VERSION_3:
 	case CPSW_VERSION_4:
 		slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
+		/* Increase RX FIFO size to 5 for supporting fullduplex
+		 * flow control mode
+		 */
+		slave_write(slave,
+			    (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+			    CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS);
 		break;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 008/102] lockd: fix lockd shutdown race

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit efda760fe95ea15291853c8fa9235c32d319cd98 ]

As reported by David Jeffery: "a signal was sent to lockd while lockd
was shutting down from a request to stop nfs.  The signal causes lockd
to call restart_grace() which puts the lockd_net structure on the grace
list.  If this signal is received at the wrong time, it will occur after
lockd_down_net() has called locks_end_grace() but before
lockd_down_net() stops the lockd thread.  This leads to lockd putting
the lockd_net structure back on the grace list, then exiting without
anything removing it from the list."

So, perform the final locks_end_grace() from the the lockd thread; this
ensures it's serialized with respect to restart_grace().

Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/lockd/svc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 61024987f97b..12d339ee6e06 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -129,6 +129,8 @@ lockd(void *vrqstp)
 {
 	int		err = 0;
 	struct svc_rqst *rqstp = vrqstp;
+	struct net *net = &init_net;
+	struct lockd_net *ln = net_generic(net, lockd_net_id);
 
 	/* try_to_freeze() is called from svc_recv() */
 	set_freezable();
@@ -173,6 +175,8 @@ lockd(void *vrqstp)
 	if (nlmsvc_ops)
 		nlmsvc_invalidate_all();
 	nlm_shutdown_hosts();
+	cancel_delayed_work_sync(&ln->grace_period_end);
+	locks_end_grace(&ln->lockd_manager);
 	return 0;
 }
 
@@ -267,8 +271,6 @@ static void lockd_down_net(struct svc_serv *serv, struct net *net)
 	if (ln->nlmsvc_users) {
 		if (--ln->nlmsvc_users == 0) {
 			nlm_shutdown_hosts_net(net);
-			cancel_delayed_work_sync(&ln->grace_period_end);
-			locks_end_grace(&ln->lockd_manager);
 			svc_shutdown_net(serv, net);
 			dprintk("lockd_down_net: per-net data destroyed; net=%p\n", net);
 		}
-- 
2.14.1

[PATCH AUTOSEL for 3.18 009/102] pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid()

[Sasha Levin]

From: Kirill Tkhai <ktkhai@virtuozzo.com>

[ Upstream commit 8896c23d2ef803f1883fea73117a435925c2b4c4 ]

alloc_pidmap() advances pid_namespace::last_pid.  When first pid
allocation fails, then next created process will have pid 2 and
pid_ns_prepare_proc() won't be called.  So, pid_namespace::proc_mnt will
never be initialized (not to mention that there won't be a child
reaper).

I saw crash stack of such case on kernel 3.10:

    BUG: unable to handle kernel NULL pointer dereference at (null)
    IP: proc_flush_task+0x8f/0x1b0
    Call Trace:
        release_task+0x3f/0x490
        wait_consider_task.part.10+0x7ff/0xb00
        do_wait+0x11f/0x280
        SyS_wait4+0x7d/0x110

We may fix this by restore of last_pid in 0 or by prohibiting of futher
allocations.  Since there was a similar issue in Oleg Nesterov's commit
314a8ad0f18a ("pidns: fix free_pid() to handle the first fork failure").
and it was fixed via prohibiting allocation, let's follow this way, and
do the same.

Link: http://lkml.kernel.org/r/149201021004.4863.6762095011554287922.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/pid.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/pid.c b/kernel/pid.c
index 65a386e24811..50ad2e5b2963 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -316,8 +316,10 @@ struct pid *alloc_pid(struct pid_namespace *ns)
 	}
 
 	if (unlikely(is_child_reaper(pid))) {
-		if (pid_ns_prepare_proc(ns))
+		if (pid_ns_prepare_proc(ns)) {
+			disable_pid_allocation(ns);
 			goto out_free;
+		}
 	}
 
 	get_pid_ns(ns);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 010/102] s390: move _text symbol to address higher than zero

[Sasha Levin]

From: Heiko Carstens <heiko.carstens@de.ibm.com>

[ Upstream commit d04a4c76f71dd5335f8e499b59617382d84e2b8d ]

The perf tool assumes that kernel symbols are never present at address
zero. In fact it assumes if functions that map symbols to addresses
return zero, that the symbol was not found.

Given that s390's _text symbol historically is located at address zero
this yields at least a couple of false errors and warnings in one of
perf's test cases about not present symbols ("perf test 1").

To fix this simply move the _text symbol to address 0x200, just behind
the initial psw and channel program located at the beginning of the
kernel image. This is now hard coded within the linker script.

I tried a nicer solution which moves the initial psw and channel
program into an own section. However that would move the symbols
within the "real" head.text section to different addresses, since the
".org" statements within head.S are relative to the head.text
section. If there is a new section in front, everything else will be
moved. Alternatively I could have adjusted all ".org" statements. But
this current solution seems to be the easiest one, since nobody really
cares where the _text symbol is actually located.

Reported-by: Zvonko Kosic <zkosic@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/s390/kernel/vmlinux.lds.S | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 35b13ed0af5f..3e9baf333b68 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -28,8 +28,14 @@ SECTIONS
 {
 	. = 0x00000000;
 	.text : {
-	_text = .;		/* Text and read-only data */
+		/* Text and read-only data */
 		HEAD_TEXT
+		/*
+		 * E.g. perf doesn't like symbols starting at address zero,
+		 * therefore skip the initial PSW and channel program located
+		 * at address zero and let _text start at 0x200.
+		 */
+	_text = 0x200;
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-- 
2.14.1

[PATCH AUTOSEL for 3.18 011/102] net/mlx4_en: Avoid adding steering rules with invalid ring

[Sasha Levin]

From: Talat Batheesh <talatb@mellanox.com>

[ Upstream commit 89c557687a32c294e9d25670a96e9287c09f2d5f ]

Inserting steering rules with illegal ring is an invalid operation,
block it.

Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index ae83da9cd18a..17b3950e04a7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -946,6 +946,11 @@ static int mlx4_en_flow_replace(struct net_device *dev,
 		qpn = priv->drop_qp.qpn;
 	else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) {
 		qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1);
+		if (qpn < priv->rss_map.base_qpn ||
+		    qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) {
+			en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn);
+			return -EINVAL;
+		}
 	} else {
 		if (cmd->fs.ring_cookie >= priv->rx_ring_num) {
 			en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n",
-- 
2.14.1

[PATCH AUTOSEL for 3.18 012/102] CIFS: silence lockdep splat in cifs_relock_file()

[Sasha Levin]

From: Rabin Vincent <rabinv@axis.com>

[ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ]

cifs_relock_file() can perform a down_write() on the inode's lock_sem even
though it was already performed in cifs_strict_readv().  Lockdep complains
about this.  AFAICS, there is no problem here, and lockdep just needs to be
told that this nesting is OK.

 =============================================
 [ INFO: possible recursive locking detected ]
 4.11.0+ #20 Not tainted
 ---------------------------------------------
 cat/701 is trying to acquire lock:
  (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00

 but task is already holding lock:
  (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&cifsi->lock_sem);
   lock(&cifsi->lock_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by cat/701:
  #0:  (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310

 stack backtrace:
 CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20
 Call Trace:
  dump_stack+0x85/0xc2
  __lock_acquire+0x17dd/0x2260
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  ? preempt_schedule_irq+0x6b/0x80
  lock_acquire+0xcc/0x260
  ? lock_acquire+0xcc/0x260
  ? cifs_reopen_file+0x7a7/0xc00
  down_read+0x2d/0x70
  ? cifs_reopen_file+0x7a7/0xc00
  cifs_reopen_file+0x7a7/0xc00
  ? printk+0x43/0x4b
  cifs_readpage_worker+0x327/0x8a0
  cifs_readpage+0x8c/0x2a0
  generic_file_read_iter+0x692/0xd00
  cifs_strict_readv+0x29f/0x310
  generic_file_splice_read+0x11c/0x1c0
  do_splice_to+0xa5/0xc0
  splice_direct_to_actor+0xfa/0x350
  ? generic_pipe_buf_nosteal+0x10/0x10
  do_splice_direct+0xb5/0xe0
  do_sendfile+0x278/0x3a0
  SyS_sendfile64+0xc4/0xe0
  entry_SYSCALL_64_fastpath+0x1f/0xbe

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 855ad5e6bd22..488dd62fc242 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -583,7 +583,7 @@ cifs_relock_file(struct cifsFileInfo *cfile)
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
 	int rc = 0;
 
-	down_read(&cinode->lock_sem);
+	down_read_nested(&cinode->lock_sem, SINGLE_DEPTH_NESTING);
 	if (cinode->can_cache_brlcks) {
 		/* can cache locks - no need to relock */
 		up_read(&cinode->lock_sem);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 013/102] net: qca_spi: Fix alignment issues in rx path

[Sasha Levin]

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 8d66c30b12ed3cb533696dea8b9a9eadd5da426a ]

The qca_spi driver causes alignment issues on ARM devices.
So fix this by using netdev_alloc_skb_ip_align().

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index f55be6ddf3a7..487d6ab771e9 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -297,8 +297,9 @@ qcaspi_receive(struct qcaspi *qca)
 
 	/* Allocate rx SKB if we don't have one available. */
 	if (!qca->rx_skb) {
-		qca->rx_skb = netdev_alloc_skb(net_dev,
-					       net_dev->mtu + VLAN_ETH_HLEN);
+		qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
+							net_dev->mtu +
+							VLAN_ETH_HLEN);
 		if (!qca->rx_skb) {
 			netdev_dbg(net_dev, "out of RX resources\n");
 			qca->stats.out_of_mem++;
@@ -378,7 +379,7 @@ qcaspi_receive(struct qcaspi *qca)
 					qca->rx_skb, qca->rx_skb->dev);
 				qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
 				netif_rx_ni(qca->rx_skb);
-				qca->rx_skb = netdev_alloc_skb(net_dev,
+				qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
 					net_dev->mtu + VLAN_ETH_HLEN);
 				if (!qca->rx_skb) {
 					netdev_dbg(net_dev, "out of RX resources\n");
@@ -760,7 +761,8 @@ qcaspi_netdev_init(struct net_device *dev)
 	if (!qca->rx_buffer)
 		return -ENOBUFS;
 
-	qca->rx_skb = netdev_alloc_skb(dev, qca->net_dev->mtu + VLAN_ETH_HLEN);
+	qca->rx_skb = netdev_alloc_skb_ip_align(dev, qca->net_dev->mtu +
+						VLAN_ETH_HLEN);
 	if (!qca->rx_skb) {
 		kfree(qca->rx_buffer);
 		netdev_info(qca->net_dev, "Failed to allocate RX sk_buff.\n");
-- 
2.14.1

[PATCH AUTOSEL for 3.18 014/102] netxen_nic: set rcode to the return status from the call to netxen_issue_cmd

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 0fe20fafd1791f993806d417048213ec57b81045 ]

Currently rcode is being initialized to NX_RCODE_SUCCESS and later it
is checked to see if it is not NX_RCODE_SUCCESS which is never true. It
appears that there is an unintentional missing assignment of rcode from
the return of the call to netxen_issue_cmd() that was dropped in
an earlier fix, so add it in.

Detected by CoverityScan, CID#401900 ("Logically dead code")

Fixes: 2dcd5d95ad6b2 ("netxen_nic: fix cdrp race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
index b8d5270359cd..e30676515529 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
@@ -247,7 +247,7 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu)
 	cmd.req.arg3 = 0;
 
 	if (recv_ctx->state == NX_HOST_CTX_STATE_ACTIVE)
-		netxen_issue_cmd(adapter, &cmd);
+		rcode = netxen_issue_cmd(adapter, &cmd);
 
 	if (rcode != NX_RCODE_SUCCESS)
 		return -EIO;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 015/102] scsi: sg: don't return bogus Sg_requests

[Sasha Levin]

From: Johannes Thumshirn <jthumshirn@suse.de>

[ Upstream commit 48ae8484e9fc324b4968d33c585e54bc98e44d61 ]

If the list search in sg_get_rq_mark() fails to find a valid request, we
return a bogus element. This then can later lead to a GPF in
sg_remove_scat().

So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case
the list search doesn't find a valid request.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/sg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 783040af3ead..ddce52b3a87d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2118,11 +2118,12 @@ sg_get_rq_mark(Sg_fd * sfp, int pack_id)
 		if ((1 == resp->done) && (!resp->sg_io_owned) &&
 		    ((-1 == pack_id) || (resp->header.pack_id == pack_id))) {
 			resp->done = 2;	/* guard against other readers */
-			break;
+			write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+			return resp;
 		}
 	}
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
-	return resp;
+	return NULL;
 }
 
 /* always adds to end of list */
-- 
2.14.1

[PATCH AUTOSEL for 3.18 016/102] KVM: PPC: Book3S PR: Check copy_to/from_user return values

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 67325e988faea735d663799b6d152b5f4254093c ]

The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.)
access an image of the HPT in userspace memory using copy_from_user
and copy_to_user.  Recently, the declarations of those functions were
annotated to indicate that the return value must be checked.  Since
this code doesn't currently check the return value, this causes
compile warnings like the ones shown below, and since on PPC the
default is to compile arch/powerpc with -Werror, this causes the
build to fail.

To fix this, we check the return values, and if non-zero, fail the
hypercall being processed with a H_FUNCTION error return value.
There is really no good error return value to use since PAPR didn't
envisage the possibility that the hypervisor may not be able to access
the guest's HPT, and H_FUNCTION (function not supported) seems as
good as any.

The typical compile warnings look like this:

  CC      arch/powerpc/kvm/book3s_pr_papr.o
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’:
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result]
  copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
  ^
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result]
  copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
  ^

... etc.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kvm/book3s_pr_papr.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c
index ce3c893d509b..e100aaf97f86 100644
--- a/arch/powerpc/kvm/book3s_pr_papr.c
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@@ -50,7 +50,9 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu)
 	pteg_addr = get_pteg_addr(vcpu, pte_index);
 
 	mutex_lock(&vcpu->kvm->arch.hpt_mutex);
-	copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
+	ret = H_FUNCTION;
+	if (copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)))
+		goto done;
 	hpte = pteg;
 
 	ret = H_PTEG_FULL;
@@ -71,7 +73,9 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu)
 	hpte[0] = cpu_to_be64(kvmppc_get_gpr(vcpu, 6));
 	hpte[1] = cpu_to_be64(kvmppc_get_gpr(vcpu, 7));
 	pteg_addr += i * HPTE_SIZE;
-	copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
+	ret = H_FUNCTION;
+	if (copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE))
+		goto done;
 	kvmppc_set_gpr(vcpu, 4, pte_index | i);
 	ret = H_SUCCESS;
 
@@ -93,7 +97,9 @@ static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu)
 
 	pteg = get_pteg_addr(vcpu, pte_index);
 	mutex_lock(&vcpu->kvm->arch.hpt_mutex);
-	copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+	ret = H_FUNCTION;
+	if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
+		goto done;
 	pte[0] = be64_to_cpu((__force __be64)pte[0]);
 	pte[1] = be64_to_cpu((__force __be64)pte[1]);
 
@@ -103,7 +109,9 @@ static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu)
 	    ((flags & H_ANDCOND) && (pte[0] & avpn) != 0))
 		goto done;
 
-	copy_to_user((void __user *)pteg, &v, sizeof(v));
+	ret = H_FUNCTION;
+	if (copy_to_user((void __user *)pteg, &v, sizeof(v)))
+		goto done;
 
 	rb = compute_tlbie_rb(pte[0], pte[1], pte_index);
 	vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
@@ -171,7 +179,10 @@ static int kvmppc_h_pr_bulk_remove(struct kvm_vcpu *vcpu)
 		}
 
 		pteg = get_pteg_addr(vcpu, tsh & H_BULK_REMOVE_PTEX);
-		copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+		if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) {
+			ret = H_FUNCTION;
+			break;
+		}
 		pte[0] = be64_to_cpu((__force __be64)pte[0]);
 		pte[1] = be64_to_cpu((__force __be64)pte[1]);
 
@@ -184,7 +195,10 @@ static int kvmppc_h_pr_bulk_remove(struct kvm_vcpu *vcpu)
 			tsh |= H_BULK_REMOVE_NOT_FOUND;
 		} else {
 			/* Splat the pteg in (userland) hpt */
-			copy_to_user((void __user *)pteg, &v, sizeof(v));
+			if (copy_to_user((void __user *)pteg, &v, sizeof(v))) {
+				ret = H_FUNCTION;
+				break;
+			}
 
 			rb = compute_tlbie_rb(pte[0], pte[1],
 					      tsh & H_BULK_REMOVE_PTEX);
@@ -211,7 +225,9 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
 
 	pteg = get_pteg_addr(vcpu, pte_index);
 	mutex_lock(&vcpu->kvm->arch.hpt_mutex);
-	copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+	ret = H_FUNCTION;
+	if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
+		goto done;
 	pte[0] = be64_to_cpu((__force __be64)pte[0]);
 	pte[1] = be64_to_cpu((__force __be64)pte[1]);
 
@@ -234,7 +250,9 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu)
 	vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
 	pte[0] = (__force u64)cpu_to_be64(pte[0]);
 	pte[1] = (__force u64)cpu_to_be64(pte[1]);
-	copy_to_user((void __user *)pteg, pte, sizeof(pte));
+	ret = H_FUNCTION;
+	if (copy_to_user((void __user *)pteg, pte, sizeof(pte)))
+		goto done;
 	ret = H_SUCCESS;
 
  done:
-- 
2.14.1

[PATCH AUTOSEL for 3.18 017/102] vmxnet3: ensure that adapter is in proper state during force_close

[Sasha Levin]

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ]

There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them).  Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again).  However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close.  As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed.  If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.

The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index a26ae97f755d..56a2bc86c439 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2648,6 +2648,11 @@ vmxnet3_force_close(struct vmxnet3_adapter *adapter)
 	/* we need to enable NAPI, otherwise dev_close will deadlock */
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		napi_enable(&adapter->rx_queue[i].napi);
+	/*
+	 * Need to clear the quiesce bit to ensure that vmxnet3_close
+	 * can quiesce the device properly
+	 */
+	clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 	dev_close(adapter->netdev);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 018/102] SMB2: Fix share type handling

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ]

In fs/cifs/smb2pdu.h, we have:
#define SMB2_SHARE_TYPE_DISK    0x01
#define SMB2_SHARE_TYPE_PIPE    0x02
#define SMB2_SHARE_TYPE_PRINT   0x03

Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can
never trigger and printer share would be interpreted as disk share.

So, test the ShareType value for equality instead.

Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/smb2pdu.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index c147cc58056f..f0488ba39ac6 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -921,15 +921,19 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree,
 		goto tcon_exit;
 	}
 
-	if (rsp->ShareType & SMB2_SHARE_TYPE_DISK)
+	switch (rsp->ShareType) {
+	case SMB2_SHARE_TYPE_DISK:
 		cifs_dbg(FYI, "connection to disk share\n");
-	else if (rsp->ShareType & SMB2_SHARE_TYPE_PIPE) {
+		break;
+	case SMB2_SHARE_TYPE_PIPE:
 		tcon->ipc = true;
 		cifs_dbg(FYI, "connection to pipe share\n");
-	} else if (rsp->ShareType & SMB2_SHARE_TYPE_PRINT) {
-		tcon->print = true;
+		break;
+	case SMB2_SHARE_TYPE_PRINT:
+		tcon->ipc = true;
 		cifs_dbg(FYI, "connection to printer\n");
-	} else {
+		break;
+	default:
 		cifs_dbg(VFS, "unknown share type %d\n", rsp->ShareType);
 		rc = -EOPNOTSUPP;
 		goto tcon_error_exit;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 019/102] PowerCap: Fix an error code in powercap_register_zone()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 216c4e9db4c9d1d2a382b42880442dc632cd47d9 ]

In the current code we accidentally return the successful result from
idr_alloc() instead of a negative error pointer.  The caller is looking
for an error pointer and so it treats the returned value as a valid
pointer.

This one might be a bit serious because if it lets people get around the
kernel's protection for remapping NULL.  I'm not sure.

Fixes: 75d2364ea0ca (PowerCap: Add class driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/powercap/powercap_sys.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index 84419af16f77..fd12ccc11e26 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -538,6 +538,7 @@ struct powercap_zone *powercap_register_zone(
 
 	power_zone->id = result;
 	idr_init(&power_zone->idr);
+	result = -ENOMEM;
 	power_zone->name = kstrdup(name, GFP_KERNEL);
 	if (!power_zone->name)
 		goto err_name_alloc;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 020/102] staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning

[Sasha Levin]

From: Andrea della Porta <sfaragnaus@gmail.com>

[ Upstream commit dea20579a69ab68cdca6adf79bb7c0c162eb9b72 ]

staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion.
cpu_to_le16() was called twice first in prism2mgmt_scan and again inside
hfa384x_drvr_setconfig16() for the same variable, hence it was swapped
twice. Incidentally, it also fixed the following sparse warning:

drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types)
drivers/staging/wlan-ng/prism2mgmt.c:173:30:    expected unsigned short [unsigned] [usertype] word
drivers/staging/wlan-ng/prism2mgmt.c:173:30:    got restricted __le16 [usertype] <noident>

Unfortunately, only compile tested.

Signed-off-by: Andrea della Porta <sfaragnaus@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/staging/wlan-ng/prism2mgmt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index 013a6240f193..c1ad0aea23b9 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -169,7 +169,7 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 				     hw->ident_sta_fw.variant) >
 	    HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
 		if (msg->scantype.data != P80211ENUM_scantype_active)
-			word = cpu_to_le16(msg->maxchanneltime.data);
+			word = msg->maxchanneltime.data;
 		else
 			word = 0;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 021/102] x86/tsc: Provide 'tsc=unstable' boot parameter

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 8309f86cd41e8714526867177facf7a316d9be53 ]

Since the clocksource watchdog will only detect broken TSC after the
fact, all TSC based clocks will likely have observed non-continuous
values before/when switching away from TSC.

Therefore only thing to fully avoid random clock movement when your
BIOS randomly mucks with TSC values from SMI handlers is reporting the
TSC as unstable at boot.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/tsc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 21187ebee7d0..37bae0d67714 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -356,6 +356,8 @@ static int __init tsc_setup(char *str)
 		tsc_clocksource_reliable = 1;
 	if (!strncmp(str, "noirqtime", 9))
 		no_sched_irq_time = 1;
+	if (!strcmp(str, "unstable"))
+		mark_tsc_unstable("boot parameter");
 	return 1;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 022/102] ARM: dts: imx6qdl-wandboard: Fix audio channel swap

[Sasha Levin]

From: Fabio Estevam <fabio.estevam@nxp.com>

[ Upstream commit 79935915300c5eb88a0e94fa9148a7505c14a02a ]

When running a stress playback/stop loop test on a mx6wandboard channel
swaps can be noticed randomly.

Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes
the issue, so add the 'lrclk-strength' property to avoid the audio
channel swaps.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb091675582..6052ea7d9d21 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -86,6 +86,7 @@
 		clocks = <&clks 201>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
 	};
 };
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 023/102] ipv6: avoid dad-failures for addresses with NODAD

[Sasha Levin]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 66eb9f86e50547ec2a8ff7a75997066a74ef584b ]

Every address gets added with TENTATIVE flag even for the addresses with
IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process
we realize it's an address with NODAD and complete the process without
sending any probe. However the TENTATIVE flags stays on the
address for sometime enough to cause misinterpretation when we receive a NS.
While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED
and endup with an address that was originally configured as NODAD with
DADFAILED.

We can't avoid scheduling dad_work for addresses with NODAD but we can
avoid adding TENTATIVE flag to avoid this racy situation.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/addrconf.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 7a5967bc0f38..acdee14c9b03 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -863,7 +863,10 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr,
 	INIT_HLIST_NODE(&ifa->addr_lst);
 	ifa->scope = scope;
 	ifa->prefix_len = pfxlen;
-	ifa->flags = flags | IFA_F_TENTATIVE;
+	ifa->flags = flags;
+	/* No need to add the TENTATIVE flag for addresses with NODAD */
+	if (!(flags & IFA_F_NODAD))
+		ifa->flags |= IFA_F_TENTATIVE;
 	ifa->valid_lft = valid_lft;
 	ifa->prefered_lft = prefered_lft;
 	ifa->cstamp = ifa->tstamp = jiffies;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 024/102] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()

[Sasha Levin]

From: Anup Patel <anup.patel@broadcom.com>

[ Upstream commit baae03a0e2497f49704628fd0aaf993cf98e1b99 ]

The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output
of Tx descriptor is to be used by next/dependent Tx descriptor.

The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome()
when calling dma->device_prep_dma_pq() under following conditions:
1. ASYNC_TX_FENCE not set in submit->flags
2. DMA_PREP_FENCE not set in dma_flags
3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags)

This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking
inspiration from do_async_xor() implementation.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 crypto/async_tx/async_pq.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index d05327caf69d..c09a51dbe59e 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
 	dma_addr_t dma_dest[2];
 	int src_off = 0;
 
-	if (submit->flags & ASYNC_TX_FENCE)
-		dma_flags |= DMA_PREP_FENCE;
-
 	while (src_cnt > 0) {
 		submit->flags = flags_orig;
 		pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
 			if (cb_fn_orig)
 				dma_flags |= DMA_PREP_INTERRUPT;
 		}
+		if (submit->flags & ASYNC_TX_FENCE)
+			dma_flags |= DMA_PREP_FENCE;
 
 		/* Drivers force forward progress in case they can not provide
 		 * a descriptor
-- 
2.14.1

[PATCH AUTOSEL for 3.18 025/102] usb: dwc3: keystone: check return value

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 018047a1dba7636e1f7fdae2cc290a528991d648 ]

Function devm_clk_get() returns an ERR_PTR when it fails. However, in
function kdwc3_probe(), its return value is not checked, which may
result in a bad memory access bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/dwc3/dwc3-keystone.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 7ec8495f4523..64539d84302b 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -117,6 +117,10 @@ static int kdwc3_probe(struct platform_device *pdev)
 	dev->dma_mask = &kdwc3_dma_mask;
 
 	kdwc->clk = devm_clk_get(kdwc->dev, "usb");
+	if (IS_ERR(kdwc->clk)) {
+		dev_err(kdwc->dev, "unable to get usb clock\n");
+		return PTR_ERR(kdwc->clk);
+	}
 
 	error = clk_prepare_enable(kdwc->clk);
 	if (error < 0) {
-- 
2.14.1

[PATCH AUTOSEL for 3.18 026/102] btrfs: fix incorrect error return ret being passed to mapping_set_error

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit bff5baf8aa37a97293725a16c03f49872249c07e ]

The setting of return code ret should be based on the error code
passed into function end_extent_writepage and not on ret. Thanks
to Liu Bo for spotting this mistake in the original fix I submitted.

Detected by CoverityScan, CID#1414312 ("Logically dead code")

Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/extent_io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index b1131c319897..a12d733a4bfc 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2438,7 +2438,7 @@ int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
 	if (!uptodate) {
 		ClearPageUptodate(page);
 		SetPageError(page);
-		ret = ret < 0 ? ret : -EIO;
+		ret = err < 0 ? err : -EIO;
 		mapping_set_error(page->mapping, ret);
 	}
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 027/102] ata: libahci: properly propagate return value of platform_get_irq()

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

[ Upstream commit c034640a32f8456018d9c8c83799ead683046b95 ]

When platform_get_irq() fails, it returns an error code, which
libahci_platform and replaces it by -EINVAL. This commit fixes that by
propagating the error code. It fixes the situation where
platform_get_irq() returns -EPROBE_DEFER because the interrupt
controller is not available yet, and generally looks like the right
thing to do.

We pay attention to not show the "no irq" message when we are in an
EPROBE_DEFER situation, because the driver probing will be retried
later on, once the interrupt controller becomes available to provide
the interrupt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ata/libahci_platform.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 0b03f9056692..94249ceb99f0 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -419,8 +419,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
-		dev_err(dev, "no irq\n");
-		return -EINVAL;
+		if (irq != -EPROBE_DEFER)
+			dev_err(dev, "no irq\n");
+		return irq;
 	}
 
 	/* prepare host */
-- 
2.14.1

[PATCH AUTOSEL for 3.18 028/102] neighbour: update neigh timestamps iff update is effective

[Sasha Levin]

From: Ihar Hrachyshka <ihrachys@redhat.com>

[ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ]

It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.

Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.

This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:

A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY.  This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.

This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.

Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.

Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/core/neighbour.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 11dc427320bd..73018d173223 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1147,10 +1147,6 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 		lladdr = neigh->ha;
 	}
 
-	if (new & NUD_CONNECTED)
-		neigh->confirmed = jiffies;
-	neigh->updated = jiffies;
-
 	/* If entry was valid and address is not changed,
 	   do not change entry state, if new one is STALE.
 	 */
@@ -1174,6 +1170,16 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 		}
 	}
 
+	/* Update timestamps only once we know we will make a change to the
+	 * neighbour entry. Otherwise we risk to move the locktime window with
+	 * noop updates and ignore relevant ARP updates.
+	 */
+	if (new != old || lladdr != neigh->ha) {
+		if (new & NUD_CONNECTED)
+			neigh->confirmed = jiffies;
+		neigh->updated = jiffies;
+	}
+
 	if (new != old) {
 		neigh_del_timer(neigh);
 		if (new & NUD_IN_TIMER)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 029/102] usb: chipidea: properly handle host or gadget initialization failure

[Sasha Levin]

From: Jisheng Zhang <jszhang@marvell.com>

[ Upstream commit c4a0bbbdb7f6e3c37fa6deb3ef28c5ed99da6175 ]

If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the
error != -ENXIO, as Peter pointed out, "it stands for initialization
for host or gadget has failed", so we'd better return failure rather
continue.

And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should
also check ci->roles[CI_ROLE_GADGET].

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/chipidea/core.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 78f4d70db917..4a8934abdac8 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -553,7 +553,7 @@ static inline void ci_role_destroy(struct ci_hdrc *ci)
 {
 	ci_hdrc_gadget_destroy(ci);
 	ci_hdrc_host_destroy(ci);
-	if (ci->is_otg)
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
 		ci_hdrc_otg_destroy(ci);
 }
 
@@ -653,20 +653,28 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	/* initialize role(s) before the interrupt is requested */
 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
 		ret = ci_hdrc_host_init(ci);
-		if (ret)
-			dev_info(dev, "doesn't support host\n");
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support host\n");
+			else
+				goto deinit_phy;
+		}
 	}
 
 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
 		ret = ci_hdrc_gadget_init(ci);
-		if (ret)
-			dev_info(dev, "doesn't support gadget\n");
+		if (ret) {
+			if (ret == -ENXIO)
+				dev_info(dev, "doesn't support gadget\n");
+			else
+				goto deinit_host;
+		}
 	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
 		ret = -ENODEV;
-		goto deinit_phy;
+		goto deinit_gadget;
 	}
 
 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
@@ -676,7 +684,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		ret = ci_hdrc_otg_init(ci);
 		if (ret) {
 			dev_err(dev, "init otg fails, ret = %d\n", ret);
-			goto stop;
+			goto deinit_gadget;
 		}
 	}
 
@@ -727,7 +735,12 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 
 	free_irq(ci->irq, ci);
 stop:
-	ci_role_destroy(ci);
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
+		ci_hdrc_otg_destroy(ci);
+deinit_gadget:
+	ci_hdrc_gadget_destroy(ci);
+deinit_host:
+	ci_hdrc_host_destroy(ci);
 deinit_phy:
 	usb_phy_shutdown(ci->transceiver);
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 030/102] USB: ene_usb6250: fix first command execution

[Sasha Levin]

From: Alan Stern <stern@rowland.harvard.edu>

[ Upstream commit 4b309f1c4972c8f09e03ac64fc63510dbf5591a4 ]

In the ene_usb6250 sub-driver for usb-storage, the ene_transport()
routine is supposed to initialize the driver before executing the
current command, if the initialization has not already been performed.
However, a bug in the routine causes it to skip the command after
doing the initialization.  Also, the routine does not return an
appropriate error code if either the initialization or the command
fails.

As a result of the first bug, the first command (a SCSI INQUIRY) is
not carried out.  The results can be seen in the system log, in the
form of a warning message and empty or garbage INQUIRY data:

Apr 18 22:40:08 notebook2 kernel: scsi host6: scsi scan: INQUIRY result too short (5), using 36
Apr 18 22:40:08 notebook2 kernel: scsi 6:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0

This patch fixes both errors.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/storage/ene_ub6250.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 26c26e3e21d3..7e0bb58f7944 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -2303,21 +2303,22 @@ static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
 
 static int ene_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
-	int result = 0;
+	int result = USB_STOR_XFER_GOOD;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
 
 	/*US_DEBUG(usb_stor_show_command(us, srb)); */
 	scsi_set_resid(srb, 0);
-	if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) {
+	if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready)))
 		result = ene_init(us);
-	} else {
+	if (result == USB_STOR_XFER_GOOD) {
+		result = USB_STOR_TRANSPORT_ERROR;
 		if (info->SD_Status.Ready)
 			result = sd_scsi_irp(us, srb);
 
 		if (info->MS_Status.Ready)
 			result = ms_scsi_irp(us, srb);
 	}
-	return 0;
+	return result;
 }
 
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 031/102] net: x25: fix one potential use-after-free issue

[Sasha Levin]

From: linzhang <xiaolou4617@gmail.com>

[ Upstream commit 64df6d525fcff1630098db9238bfd2b3e092d5c1 ]

The function x25_init is not properly unregister related resources
on error handler.It is will result in kernel oops if x25_init init
failed, so add properly unregister call on error handler.

Also, i adjust the coding style and make x25_register_sysctl properly
return failure.

Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/net/x25.h        |  4 ++--
 net/x25/af_x25.c         | 24 ++++++++++++++++--------
 net/x25/sysctl_net_x25.c |  5 ++++-
 3 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/include/net/x25.h b/include/net/x25.h
index c383aa4edbf0..6d30a01d281d 100644
--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -298,10 +298,10 @@ void x25_check_rbuf(struct sock *);
 
 /* sysctl_net_x25.c */
 #ifdef CONFIG_SYSCTL
-void x25_register_sysctl(void);
+int x25_register_sysctl(void);
 void x25_unregister_sysctl(void);
 #else
-static inline void x25_register_sysctl(void) {};
+static inline int x25_register_sysctl(void) { return 0; };
 static inline void x25_unregister_sysctl(void) {};
 #endif /* CONFIG_SYSCTL */
 
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 5ad4418ef093..7ac8d3869267 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1796,32 +1796,40 @@ void x25_kill_by_neigh(struct x25_neigh *nb)
 
 static int __init x25_init(void)
 {
-	int rc = proto_register(&x25_proto, 0);
+	int rc;
 
-	if (rc != 0)
+	rc = proto_register(&x25_proto, 0);
+	if (rc)
 		goto out;
 
 	rc = sock_register(&x25_family_ops);
-	if (rc != 0)
+	if (rc)
 		goto out_proto;
 
 	dev_add_pack(&x25_packet_type);
 
 	rc = register_netdevice_notifier(&x25_dev_notifier);
-	if (rc != 0)
+	if (rc)
 		goto out_sock;
 
-	pr_info("Linux Version 0.2\n");
+	rc = x25_register_sysctl();
+	if (rc)
+		goto out_dev;
 
-	x25_register_sysctl();
 	rc = x25_proc_init();
-	if (rc != 0)
-		goto out_dev;
+	if (rc)
+		goto out_sysctl;
+
+	pr_info("Linux Version 0.2\n");
+
 out:
 	return rc;
+out_sysctl:
+	x25_unregister_sysctl();
 out_dev:
 	unregister_netdevice_notifier(&x25_dev_notifier);
 out_sock:
+	dev_remove_pack(&x25_packet_type);
 	sock_unregister(AF_X25);
 out_proto:
 	proto_unregister(&x25_proto);
diff --git a/net/x25/sysctl_net_x25.c b/net/x25/sysctl_net_x25.c
index 43239527a205..703d46aae7a2 100644
--- a/net/x25/sysctl_net_x25.c
+++ b/net/x25/sysctl_net_x25.c
@@ -73,9 +73,12 @@ static struct ctl_table x25_table[] = {
 	{ 0, },
 };
 
-void __init x25_register_sysctl(void)
+int __init x25_register_sysctl(void)
 {
 	x25_table_header = register_net_sysctl(&init_net, "net/x25", x25_table);
+	if (!x25_table_header)
+		return -ENOMEM;
+	return 0;
 }
 
 void x25_unregister_sysctl(void)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 032/102] USB: ene_usb6250: fix SCSI residue overwriting

[Sasha Levin]

From: Alan Stern <stern@rowland.harvard.edu>

[ Upstream commit aa18c4b6e0e39bfb00af48734ec24bc189ac9909 ]

In the ene_usb6250 sub-driver for usb-storage, the SCSI residue is not
reported correctly.  The residue is initialized to 0, but this value
is overwritten whenever the driver sends firmware to the card reader
before performing the current command.  As a result, a valid READ or
WRITE operation appears to have failed, causing the SCSI core to retry
the command multiple times and eventually fail.

This patch fixes the problem by resetting the SCSI residue to 0 after
sending firmware to the device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/storage/ene_ub6250.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 7e0bb58f7944..e82e179f3558 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1950,6 +1950,8 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag)
 	bcb->CDB[0] = 0xEF;
 
 	result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+	if (us->srb != NULL)
+		scsi_set_resid(us->srb, 0);
 	info->BIN_FLAG = flag;
 	kfree(buf);
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 033/102] sh_eth: Use platform device for printing before register_netdev()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ]

The MDIO initialization failure message is printed using the network
device, before it has been registered, leading to:

     (null): failed to initialise MDIO

Use the platform device instead to fix this:

    sh-eth ee700000.ethernet: failed to initialise MDIO

Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/renesas/sh_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index b89d7c16991d..8f3f692942d8 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2933,7 +2933,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	/* MDIO bus init */
 	ret = sh_mdio_init(mdp, pd);
 	if (ret) {
-		dev_err(&ndev->dev, "failed to initialise MDIO\n");
+		dev_err(&pdev->dev, "failed to initialise MDIO\n");
 		goto out_release;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 034/102] ath5k: fix memory leak on buf on failed eeprom read

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]

The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.

Detected by CoverityScan, CID#1248782 ("Resource Leak")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath5k/debug.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index c70782e8f07b..b5802e37ab24 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -939,7 +939,10 @@ static int open_file_eeprom(struct inode *inode, struct file *file)
 	}
 
 	for (i = 0; i < eesize; ++i) {
-		AR5K_EEPROM_READ(i, val);
+		if (!ath5k_hw_nvram_read(ah, i, &val)) {
+			ret = -EIO;
+			goto freebuf;
+		}
 		buf[i] = val;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 035/102] selftests/powerpc: Fix TM resched DSCR test with some compilers

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ]

The tm-resched-dscr test has started failing sometimes, depending on
what compiler it's built with, eg:

  test: tm_resched_dscr
  Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed.
  !! child died by signal 6

When it fails we see that the compiler doesn't initialise rv to 1 before
entering the inline asm block. Although that's counter intuitive, it
is allowed because we tell the compiler that the inline asm will write
to rv (using "=r"), meaning the original value is irrelevant.

Marking it as a read/write parameter would presumably work, but it seems
simpler to fix it by setting the initial value of rv in the inline asm.

Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c
index 42d4c8caad81..de8dc82e2567 100644
--- a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c
+++ b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c
@@ -45,12 +45,12 @@ int test_body(void)
 	printf("Check DSCR TM context switch: ");
 	fflush(stdout);
 	for (;;) {
-		rv = 1;
 		asm __volatile__ (
 			/* set a known value into the DSCR */
 			"ld      3, %[dscr1];"
 			"mtspr   %[sprn_dscr], 3;"
 
+			"li      %[rv], 1;"
 			/* start and suspend a transaction */
 			TBEGIN
 			"beq     1f;"
-- 
2.14.1

[PATCH AUTOSEL for 3.18 036/102] xfrm: fix state migration copy replay sequence numbers

[Sasha Levin]

From: Antony Antony <antony@phenome.org>

[ Upstream commit a486cd23661c9387fb076c3f6ae8b2aa9d20d54a ]

During xfrm migration copy replay and preplay sequence numbers
from the previous state.

Here is a tcpdump output showing the problem.
10.0.10.46 is running vanilla kernel, is the IKE/IPsec responder.
After the migration it sent wrong sequence number, reset to 1.
The migration is from 10.0.0.52 to 10.0.0.53.

IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7cf), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7cf), length 136
IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d0), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7d0), length 136

IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa  inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa  inf2[R]
IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa  inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa  inf2[R]

IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d1), length 136

NOTE: next sequence is wrong 0x1

IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x1), length 136
IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d2), length 136
IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x2), length 136

Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_state.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index de971b6d38c5..592a6102187d 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1208,6 +1208,8 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig)
 	x->curlft.add_time = orig->curlft.add_time;
 	x->km.state = orig->km.state;
 	x->km.seq = orig->km.seq;
+	x->replay = orig->replay;
+	x->preplay = orig->preplay;
 
 	return x;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 037/102] ARM: davinci: da8xx: Create DSP device only when assigned memory

[Sasha Levin]

From: Suman Anna <s-anna@ti.com>

[ Upstream commit f97f03578b997a8ec2b9bc4928f958a865137268 ]

The DSP device on Davinci platforms does not have an MMU and requires
specific DDR memory to boot. This memory is reserved using the rproc_mem
kernel boot parameter and is assigned to the device on non-DT boots.
The remoteproc core uses the DMA API and so will fall back to assigning
random memory if this memory is not assigned to the device, but the DSP
remote processor boot will not be successful in such cases. So, check
that memory has been reserved and assigned to the device specifically
before even creating the DSP device.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-davinci/devices-da8xx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index b85b781b05fd..e83874ba6e6d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -761,6 +761,8 @@ static struct platform_device da8xx_dsp = {
 	.resource	= da8xx_rproc_resources,
 };
 
+static bool rproc_mem_inited __initdata;
+
 #if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
 
 static phys_addr_t rproc_base __initdata;
@@ -799,6 +801,8 @@ void __init da8xx_rproc_reserve_cma(void)
 	ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0);
 	if (ret)
 		pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret);
+	else
+		rproc_mem_inited = true;
 }
 
 #else
@@ -813,6 +817,12 @@ int __init da8xx_register_rproc(void)
 {
 	int ret;
 
+	if (!rproc_mem_inited) {
+		pr_warn("%s: memory not reserved for DSP, not registering DSP device\n",
+			__func__);
+		return -ENOMEM;
+	}
+
 	ret = platform_device_register(&da8xx_dsp);
 	if (ret)
 		pr_err("%s: can't register DSP device: %d\n", __func__, ret);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 038/102] ray_cs: Avoid reading past end of buffer

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]

Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ray_cs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 8330fa33e50b..52a91137f49c 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -247,7 +247,10 @@ static const UCHAR b4_default_startup_parms[] = {
 	0x04, 0x08,		/* Noise gain, limit offset */
 	0x28, 0x28,		/* det rssi, med busy offsets */
 	7,			/* det sync thresh */
-	0, 2, 2			/* test mode, min, max */
+	0, 2, 2,		/* test mode, min, max */
+	0,			/* rx/tx delay */
+	0, 0, 0, 0, 0, 0,	/* current BSS id */
+	0			/* hop set */
 };
 
 /*===========================================================================*/
@@ -598,7 +601,7 @@ static void init_startup_params(ray_dev_t *local)
 	 *    a_beacon_period = hops    a_beacon_period = KuS
 	 *//* 64ms = 010000 */
 	if (local->fw_ver == 0x55) {
-		memcpy((UCHAR *) &local->sparm.b4, b4_default_startup_parms,
+		memcpy(&local->sparm.b4, b4_default_startup_parms,
 		       sizeof(struct b4_startup_params));
 		/* Translate sane kus input values to old build 4/5 format */
 		/* i = hop time in uS truncated to 3 bytes */
-- 
2.14.1

[PATCH AUTOSEL for 3.18 039/102] leds: pca955x: Correct I2C Functionality

[Sasha Levin]

From: Tin Huynh <tnhuynh@apm.com>

[ Upstream commit aace34c0bb8ea3c8bdcec865b6a4be4db0a68e33 ]

The driver checks an incorrect flag of functionality of adapter.
When a driver requires i2c_smbus_read_byte_data and
i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA
instead I2C_FUNC_I2C.
This patch fixes the problem.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/leds/leds-pca955x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index c3a08b60535b..760deffa9ad3 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -281,7 +281,7 @@ static int pca955x_probe(struct i2c_client *client,
 			"slave address 0x%02x\n",
 			id->name, chip->bits, client->addr);
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
 
 	if (pdata) {
-- 
2.14.1

[PATCH AUTOSEL for 3.18 040/102] block: fix an error code in add_partition()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ]

We don't set an error code on this path.  It means that we return NULL
instead of an error pointer and the caller does a NULL dereference.

Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/partition-generic.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/block/partition-generic.c b/block/partition-generic.c
index 0d9e5f97f0a8..94de2055365e 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -309,8 +309,10 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 
 	if (info) {
 		struct partition_meta_info *pinfo = alloc_part_info(disk);
-		if (!pinfo)
+		if (!pinfo) {
+			err = -ENOMEM;
 			goto out_free_stats;
+		}
 		memcpy(pinfo, info, sizeof(*info));
 		p->info = pinfo;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 3.18 041/102] libceph: NULL deref on crush_decode() error path

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 293dffaad8d500e1a5336eeb90d544cf40d4fbd8 ]

If there is not enough space then ceph_decode_32_safe() does a goto bad.
We need to return an error code in that situation.  The current code
returns ERR_PTR(0) which is NULL.  The callers are not expecting that
and it results in a NULL dereference.

Fixes: f24e9980eb86 ("ceph: OSD client")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ceph/osdmap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c
index 8bb2e0c1cb50..c2f815d44914 100644
--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -270,6 +270,7 @@ static struct crush_map *crush_decode(void *pbyval, void *end)
 		u32 yes;
 		struct crush_rule *r;
 
+		err = -EINVAL;
 		ceph_decode_32_safe(p, end, yes, bad);
 		if (!yes) {
 			dout("crush_decode NO rule %d off %x %p to %p\n",
-- 
2.14.1

[PATCH AUTOSEL for 3.18 042/102] netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize

[Sasha Levin]

From: Liping Zhang <zlpnobody@gmail.com>

[ Upstream commit fefa92679dbe0c613e62b6c27235dcfbe9640ad1 ]

If nf_conntrack_htable_size was adjusted by the user during the ct
dump operation, we may invoke nf_ct_put twice for the same ct, i.e.
the "last" ct. This will cause the ct will be freed but still linked
in hash buckets.

It's very easy to reproduce the problem by the following commands:
  # while : ; do
  echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets
  done
  # while : ; do
  conntrack -L
  done
  # iperf -s 127.0.0.1 &
  # iperf -c 127.0.0.1 -P 60 -t 36000

After a while, the system will hang like this:
  NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184]
  NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382]
  ...

So at last if we find cb->args[1] is equal to "last", this means hash
resize happened, then we can set cb->args[1] to 0 to fix the above
issue.

Fixes: d205dc40798d ("[NETFILTER]: ctnetlink: fix deadlock in table dumping")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/netfilter/nf_conntrack_netlink.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index de9ea452dd60..4d69e924a0f1 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -828,8 +828,13 @@ ctnetlink_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
 	}
 out:
 	local_bh_enable();
-	if (last)
+	if (last) {
+		/* nf ct hash resize happened, now clear the leftover. */
+		if ((struct nf_conn *)cb->args[1] == last)
+			cb->args[1] = 0;
+
 		nf_ct_put(last);
+	}
 
 	return skb->len;
 }
-- 
2.14.1

[PATCH AUTOSEL for 3.18 043/102] scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()

[Sasha Levin]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit c2dd893a3b0772d1c680e109b9d5715d7f73022b ]

If multiple tasks attempt to read the stats, it may happen that the
start_req_done completion is re-initialized while still being used by
another task, causing a list corruption.

This patch fixes the bug by adding a mutex to serialize the calls to
bnx2fc_get_host_stats().

WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted)
Hardware name: PowerEdge R820
list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588

Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0
 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60
 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0
 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180
 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20
 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20
 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc]
 [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc]
 [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc]
 [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50
 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50
 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200
 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0
 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50
 [<ffffffff8119a651>] ? sys_read+0x51/0xb0
 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290
 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/bnx2fc/bnx2fc.h      |  1 +
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 ++++++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 1346e052e03c..8009158a6639 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -191,6 +191,7 @@ struct bnx2fc_hba {
 	struct bnx2fc_cmd_mgr *cmd_mgr;
 	spinlock_t hba_lock;
 	struct mutex hba_mutex;
+	struct mutex hba_stats_mutex;
 	unsigned long adapter_state;
 		#define ADAPTER_STATE_UP		0
 		#define ADAPTER_STATE_GOING_DOWN	1
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 72533c58c1f3..2577f8e86be3 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -641,15 +641,17 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost)
 	if (!fw_stats)
 		return NULL;
 
+	mutex_lock(&hba->hba_stats_mutex);
+
 	bnx2fc_stats = fc_get_host_stats(shost);
 
 	init_completion(&hba->stat_req_done);
 	if (bnx2fc_send_stat_req(hba))
-		return bnx2fc_stats;
+		goto unlock_stats_mutex;
 	rc = wait_for_completion_timeout(&hba->stat_req_done, (2 * HZ));
 	if (!rc) {
 		BNX2FC_HBA_DBG(lport, "FW stat req timed out\n");
-		return bnx2fc_stats;
+		goto unlock_stats_mutex;
 	}
 	BNX2FC_STATS(hba, rx_stat2, fc_crc_cnt);
 	bnx2fc_stats->invalid_crc_count += hba->bfw_stats.fc_crc_cnt;
@@ -671,6 +673,9 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost)
 
 	memcpy(&hba->prev_stats, hba->stats_buffer,
 	       sizeof(struct fcoe_statistics_params));
+
+unlock_stats_mutex:
+	mutex_unlock(&hba->hba_stats_mutex);
 	return bnx2fc_stats;
 }
 
@@ -1303,6 +1308,7 @@ static struct bnx2fc_hba *bnx2fc_hba_create(struct cnic_dev *cnic)
 	}
 	spin_lock_init(&hba->hba_lock);
 	mutex_init(&hba->hba_mutex);
+	mutex_init(&hba->hba_stats_mutex);
 
 	hba->cnic = cnic;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 044/102] fix race in drivers/char/random.c:get_reg()

[Sasha Levin]

From: Michael Schmitz <schmitzmic@gmail.com>

[ Upstream commit 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 ]

get_reg() can be reentered on architectures with prioritized interrupts
(m68k in this case), causing f->reg_index to be incremented after the
range check. Out of bounds memory access past the pt_regs struct results.
This will go mostly undetected unless access is beyond end of memory.

Prevent the race by disabling interrupts in get_reg().

Tested on m68k (Atari Falcon, and ARAnyM emulator).

Kudos to Geert Uytterhoeven for helping to trace this race.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/random.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index d55156fc064d..73049abf4898 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -863,12 +863,16 @@ static void add_interrupt_bench(cycles_t start)
 static __u32 get_reg(struct fast_pool *f, struct pt_regs *regs)
 {
 	__u32 *ptr = (__u32 *) regs;
+	unsigned long flags;
 
 	if (regs == NULL)
 		return 0;
+	local_irq_save(flags);
 	if (f->reg_idx >= sizeof(struct pt_regs) / sizeof(__u32))
 		f->reg_idx = 0;
-	return *(ptr + f->reg_idx++);
+	ptr += f->reg_idx++;
+	local_irq_restore(flags);
+	return *ptr;
 }
 
 void add_interrupt_randomness(int irq, int irq_flags)
-- 
2.14.1

Re: [PATCH AUTOSEL for 3.18 044/102] fix race in drivers/char/random.c:get_reg()

[Geert Uytterhoeven]

Hi Sasha,

On Mon, Mar 19, 2018 at 5:12 PM, Sasha Levin
<Alexander.Levin@microsoft.com> wrote:
> From: Michael Schmitz <schmitzmic@gmail.com>
>
> [ Upstream commit 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 ]
>
> get_reg() can be reentered on architectures with prioritized interrupts
> (m68k in this case), causing f->reg_index to be incremented after the
> range check. Out of bounds memory access past the pt_regs struct results.
> This will go mostly undetected unless access is beyond end of memory.
>
> Prevent the race by disabling interrupts in get_reg().
>
> Tested on m68k (Atari Falcon, and ARAnyM emulator).
>
> Kudos to Geert Uytterhoeven for helping to trace this race.
>
> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>

You probably want to apply follow-up commit 92e75428ffc90e2a
("random: use lockless method of accessing and updating f->reg_idx"), too.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH AUTOSEL for 3.18 044/102] fix race in drivers/char/random.c:get_reg()

[Sasha Levin]

On Tue, Mar 20, 2018 at 10:48:48AM +0100, Geert Uytterhoeven wrote:
>Hi Sasha,
>
>On Mon, Mar 19, 2018 at 5:12 PM, Sasha Levin
><Alexander.Levin@microsoft.com> wrote:
>> From: Michael Schmitz <schmitzmic@gmail.com>
>>
>> [ Upstream commit 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 ]
>>
>> get_reg() can be reentered on architectures with prioritized interrupts
>> (m68k in this case), causing f->reg_index to be incremented after the
>> range check. Out of bounds memory access past the pt_regs struct results.
>> This will go mostly undetected unless access is beyond end of memory.
>>
>> Prevent the race by disabling interrupts in get_reg().
>>
>> Tested on m68k (Atari Falcon, and ARAnyM emulator).
>>
>> Kudos to Geert Uytterhoeven for helping to trace this race.
>>
>> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
>> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
>> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
>
>You probably want to apply follow-up commit 92e75428ffc90e2a
>("random: use lockless method of accessing and updating f->reg_idx"), too.

I've grabbed it too, thanks!

-- 

Thanks,
Sasha

[PATCH AUTOSEL for 3.18 045/102] ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()

[Sasha Levin]

From: Eryu Guan <eguan@redhat.com>

[ Upstream commit 624327f8794704c5066b11a52f9da6a09dce7f9a ]

ext4_find_unwritten_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.

When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size ext4 on x86_64 host.

  # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
  	    -c "seek -d 0" /mnt/ext4/testfile
  wrote 1024/1024 bytes at offset 2048
  1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec)
  Whence  Result
  DATA    EOF

Data at offset 2k was missed, and lseek(2) returned ENXIO.

This is unconvered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.

Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/ext4/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 64623537f3b0..aa7cc4a51a84 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -300,7 +300,7 @@ static int ext4_find_unwritten_pgoff(struct inode *inode,
 		int i, num;
 		unsigned long nr_pages;
 
-		num = min_t(pgoff_t, end - index, PAGEVEC_SIZE);
+		num = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1;
 		nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index,
 					  (pgoff_t)num);
 		if (nr_pages == 0)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 046/102] net: move somaxconn init from sysctl code

[Sasha Levin]

From: Roman Kapl <roman.kapl@sysgo.com>

[ Upstream commit 7c3f1875c66fbc19762760097cabc91849ea0bbb ]

The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.

This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request.  Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.

Before ef547f2ac16 (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.

Signed-off-by: Roman Kapl <roman.kapl@sysgo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/core/net_namespace.c   | 19 +++++++++++++++++++
 net/core/sysctl_net_core.c |  2 --
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 7f155175bba8..a81693f9753c 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -188,6 +188,25 @@ static __net_init int setup_net(struct net *net, struct user_namespace *user_ns)
 	goto out;
 }
 
+static int __net_init net_defaults_init_net(struct net *net)
+{
+	net->core.sysctl_somaxconn = SOMAXCONN;
+	return 0;
+}
+
+static struct pernet_operations net_defaults_ops = {
+	.init = net_defaults_init_net,
+};
+
+static __init int net_defaults_init(void)
+{
+	if (register_pernet_subsys(&net_defaults_ops))
+		panic("Cannot initialize net default settings");
+
+	return 0;
+}
+
+core_initcall(net_defaults_init);
 
 #ifdef CONFIG_NET_NS
 static struct kmem_cache *net_cachep;
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 4f00a8eaf704..c49a159c7b8a 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -395,8 +395,6 @@ static __net_init int sysctl_core_net_init(struct net *net)
 {
 	struct ctl_table *tbl;
 
-	net->core.sysctl_somaxconn = SOMAXCONN;
-
 	tbl = netns_core_table;
 	if (!net_eq(net, &init_net)) {
 		tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 047/102] bonding: Don't update slave->link until ready to commit

[Sasha Levin]

From: Nithin Sujir <nsujir@tintri.com>

[ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ]

In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.

However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.

This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.

NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.

Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.

Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/bonding/bond_main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 566054c0eb9a..09f86bf560cc 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2425,11 +2425,13 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		unsigned long trans_start = dev_trans_start(slave->dev);
 
+		slave->new_link = BOND_LINK_NOCHANGE;
+
 		if (slave->link != BOND_LINK_UP) {
 			if (bond_time_in_interval(bond, trans_start, 1) &&
 			    bond_time_in_interval(bond, slave->last_rx, 1)) {
 
-				slave->link  = BOND_LINK_UP;
+				slave->new_link = BOND_LINK_UP;
 				slave_state_changed = 1;
 
 				/* primary_slave has no meaning in round-robin
@@ -2456,7 +2458,7 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 			if (!bond_time_in_interval(bond, trans_start, 2) ||
 			    !bond_time_in_interval(bond, slave->last_rx, 2)) {
 
-				slave->link  = BOND_LINK_DOWN;
+				slave->new_link = BOND_LINK_DOWN;
 				slave_state_changed = 1;
 
 				if (slave->link_failure_count < UINT_MAX)
@@ -2487,6 +2489,11 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
 		if (!rtnl_trylock())
 			goto re_arm;
 
+		bond_for_each_slave(bond, slave, iter) {
+			if (slave->new_link != BOND_LINK_NOCHANGE)
+				slave->link = slave->new_link;
+		}
+
 		if (slave_state_changed) {
 			bond_slave_state_change(bond);
 			if (BOND_MODE(bond) == BOND_MODE_XOR)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 048/102] KVM: nVMX: Fix handling of lmsw instruction

[Sasha Levin]

From: Jan H. Schönherr <jschoenh@amazon.de>

[ Upstream commit e1d39b17e044e8ae819827810d87d809ba5f58c0 ]

The decision whether or not to exit from L2 to L1 on an lmsw instruction is
based on bogus values: instead of using the information encoded within the
exit qualification, it uses the data also used for the mov-to-cr
instruction, which boils down to using whatever is in %eax at that point.

Use the correct values instead.

Without this fix, an L1 may not get notified when a 32-bit Linux L2
switches its secondary CPUs to protected mode; the L1 is only notified on
the next modification of CR0. This short time window poses a problem, when
there is some other reason to exit to L1 in between. Then, L2 will be
resumed in real mode and chaos ensues.

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kvm/vmx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 9b02ba40fed0..66ed8d43cb16 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6928,11 +6928,13 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	int cr = exit_qualification & 15;
-	int reg = (exit_qualification >> 8) & 15;
-	unsigned long val = kvm_register_readl(vcpu, reg);
+	int reg;
+	unsigned long val;
 
 	switch ((exit_qualification >> 4) & 3) {
 	case 0: /* mov to cr */
+		reg = (exit_qualification >> 8) & 15;
+		val = kvm_register_readl(vcpu, reg);
 		switch (cr) {
 		case 0:
 			if (vmcs12->cr0_guest_host_mask &
@@ -6987,6 +6989,7 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
 		 * lmsw can change bits 1..3 of cr0, and only set bit 0 of
 		 * cr0. Other attempted changes are ignored, with no exit.
 		 */
+		val = (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f;
 		if (vmcs12->cr0_guest_host_mask & 0xe &
 		    (val ^ vmcs12->cr0_read_shadow))
 			return 1;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 049/102] net: llc: add lock_sock in llc_ui_bind to avoid a race condition

[Sasha Levin]

From: linzhang <xiaolou4617@gmail.com>

[ Upstream commit 0908cf4dfef35fc6ac12329007052ebe93ff1081 ]

There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.

If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).

The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.

So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.

Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/llc/af_llc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 3e8691895385..944fd5f6b069 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -309,6 +309,8 @@ static int llc_ui_bind(struct socket *sock, struct sockaddr *uaddr, int addrlen)
 	int rc = -EINVAL;
 
 	dprintk("%s: binding %02X\n", __func__, addr->sllc_sap);
+
+	lock_sock(sk);
 	if (unlikely(!sock_flag(sk, SOCK_ZAPPED) || addrlen != sizeof(*addr)))
 		goto out;
 	rc = -EAFNOSUPPORT;
@@ -380,6 +382,7 @@ static int llc_ui_bind(struct socket *sock, struct sockaddr *uaddr, int addrlen)
 out_put:
 	llc_sap_put(sap);
 out:
+	release_sock(sk);
 	return rc;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 050/102] l2tp: fix missing print session offset info

[Sasha Levin]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 820da5357572715c6235ba3b3daa2d5b43a1198f ]

Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace

Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/l2tp/l2tp_netlink.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index 0ac907adb2f4..9afeec7117e3 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -633,6 +633,8 @@ static int l2tp_nl_session_send(struct sk_buff *skb, u32 portid, u32 seq, int fl
 
 	if ((session->ifname[0] &&
 	     nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
+	    (session->offset &&
+	     nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) ||
 	    (session->cookie_len &&
 	     nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
 		     &session->cookie[0])) ||
-- 
2.14.1

[PATCH AUTOSEL for 3.18 051/102] scsi: libiscsi: Allow sd_shutdown on bad transport

[Sasha Levin]

From: Rafael David Tinoco <rafael.tinoco@canonical.com>

[ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ]

If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.

PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
 #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
 #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
 #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
 #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c

This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.

Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.

Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.

After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.

Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 0f100b35f9ab..9ca83ebef776 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1695,6 +1695,15 @@ int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc)
 		 */
 		switch (session->state) {
 		case ISCSI_STATE_FAILED:
+			/*
+			 * cmds should fail during shutdown, if the session
+			 * state is bad, allowing completion to happen
+			 */
+			if (unlikely(system_state != SYSTEM_RUNNING)) {
+				reason = FAILURE_SESSION_FAILED;
+				sc->result = DID_NO_CONNECT << 16;
+				break;
+			}
 		case ISCSI_STATE_IN_RECOVERY:
 			reason = FAILURE_SESSION_IN_RECOVERY;
 			sc->result = DID_IMM_RETRY << 16;
@@ -1998,6 +2007,19 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
 	}
 
 	if (session->state != ISCSI_STATE_LOGGED_IN) {
+		/*
+		 * During shutdown, if session is prematurely disconnected,
+		 * recovery won't happen and there will be hung cmds. Not
+		 * handling cmds would trigger EH, also bad in this case.
+		 * Instead, handle cmd, allow completion to happen and let
+		 * upper layer to deal with the result.
+		 */
+		if (unlikely(system_state != SYSTEM_RUNNING)) {
+			sc->result = DID_NO_CONNECT << 16;
+			ISCSI_DBG_EH(session, "sc on shutdown, handled\n");
+			rc = BLK_EH_HANDLED;
+			goto done;
+		}
 		/*
 		 * We are probably in the middle of iscsi recovery so let
 		 * that complete and handle the error.
@@ -2102,7 +2124,7 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
 		task->last_timeout = jiffies;
 	spin_unlock(&session->frwd_lock);
 	ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
-		     "timer reset" : "nh");
+		     "timer reset" : "shutdown or nh");
 	return rc;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 052/102] vfb: fix video mode and line_length being set when loaded

[Sasha Levin]

From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy@national.shitposting.agency>

[ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ]

Currently, when loading the vfb module, the newly created fbdev
has a line_length of 0, and its video mode would be PSEUDOCOLOR
regardless of color depth. (The former could be worked around by
calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE
flag set.) This patch automatically sets the line_length correctly,
and the video mode is derived from the bit depth now as well.

Thanks to Geert Uytterhoeven for confirming the bug and helping me with
the patch.

Output of `fbset -i' before the patch:
mode "1366x768-60"
    # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
    geometry 1366 768 1366 768 32
    timings 13806 120 10 14 3 32 5
    rgba 8/0,8/8,8/16,8/24
endmode

Frame buffer device information:
    Name        : Virtual FB
    Address     : 0xffffaa1405d85000
    Size        : 4196352
    Type        : PACKED PIXELS
    Visual      : PSEUDOCOLOR
    XPanStep    : 1
    YPanStep    : 1
    YWrapStep   : 1
    LineLength  : 0                    <-- note this
    Accelerator : No

After:
mode "1366x768-60"
    # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
    geometry 1366 768 1366 768 32
    timings 13806 120 10 14 3 32 5
    rgba 8/0,8/8,8/16,8/24
endmode

Frame buffer device information:
    Name        : Virtual FB
    Address     : 0xffffaa1405d85000
    Size        : 4196352
    Type        : PACKED PIXELS
    Visual      : TRUECOLOR
    XPanStep    : 1
    YPanStep    : 1
    YWrapStep   : 1
    LineLength  : 5464
    Accelerator : No

Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy@national.shitposting.agency>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/vfb.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/video/fbdev/vfb.c b/drivers/video/fbdev/vfb.c
index 70a897b1e458..146cc3516f61 100644
--- a/drivers/video/fbdev/vfb.c
+++ b/drivers/video/fbdev/vfb.c
@@ -284,8 +284,23 @@ static int vfb_check_var(struct fb_var_screeninfo *var,
  */
 static int vfb_set_par(struct fb_info *info)
 {
+	switch (info->var.bits_per_pixel) {
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	case 8:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	case 16:
+	case 24:
+	case 32:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	}
+
 	info->fix.line_length = get_line_length(info->var.xres_virtual,
 						info->var.bits_per_pixel);
+
 	return 0;
 }
 
@@ -526,6 +541,8 @@ static int vfb_probe(struct platform_device *dev)
 		goto err2;
 	platform_set_drvdata(dev, info);
 
+	vfb_set_par(info);
+
 	fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n",
 		videomemorysize >> 10);
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 053/102] wl1251: check return from call to wl1251_acx_arp_ip_filter

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]

Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.

Detected by CoverityScan, CID#1164835 ("Logically dead code")

Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ti/wl1251/main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 15527d8aa015..8720b8ae991c 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1200,8 +1200,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
 
 		enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
-		wl1251_acx_arp_ip_filter(wl, enable, addr);
-
+		ret = wl1251_acx_arp_ip_filter(wl, enable, addr);
 		if (ret < 0)
 			goto out_sleep;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 3.18 054/102] hdlcdrv: Fix divide by zero in hdlcdrv_ioctl

[Sasha Levin]

From: Firo Yang <firogm@gmail.com>

[ Upstream commit fb3ce90b7d7761b6f7f28f0ff5c456ef6b5229a1 ]

syszkaller fuzzer triggered a divide by zero, when set calibration
through ioctl().

To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/hamradio/hdlcdrv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index c67a27245072..69421ac06788 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -571,6 +571,8 @@ static int hdlcdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	case HDLCDRVCTL_CALIBRATE:
 		if(!capable(CAP_SYS_RAWIO))
 			return -EPERM;
+		if (s->par.bitrate <= 0)
+			return -EINVAL;
 		if (bi.data.calibrate > INT_MAX / s->par.bitrate)
 			return -EINVAL;
 		s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 055/102] HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit f3d3eab667de62572376abb1aa26316191c39929 ]

For ACPI devices which do not have a _PSC method, the ACPI subsys cannot
query their initial state at boot, so these devices are assumed to have
been put in D0 by the BIOS, but for touchscreens that is not always true.

This commit adds a call to acpi_device_fix_up_power to explicitly put
devices without a _PSC method into D0 state (for devices with a _PSC
method it is a nop). Note we only need to do this on probe, after a
resume the ACPI subsys knows the device is in D3 and will properly
put it in D0.

This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1
device failing to probe with a "hid_descr_cmd failed" error.

Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 462b0a383353..8d36b4f551d8 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -874,6 +874,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
 	return 0;
 }
 
+static void i2c_hid_acpi_fix_up_power(struct device *dev)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (handle && acpi_bus_get_device(handle, &adev) == 0)
+		acpi_device_fix_up_power(adev);
+}
+
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
 	{"ACPI0C50", 0 },
 	{"PNP0C50", 0 },
@@ -886,6 +895,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
 {
 	return -ENODEV;
 }
+
+static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
 #endif
 
 #ifdef CONFIG_OF
@@ -976,6 +987,8 @@ static int i2c_hid_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto err;
 
+	i2c_hid_acpi_fix_up_power(&client->dev);
+
 	pm_runtime_get_noresume(&client->dev);
 	pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 056/102] ovl: filter trusted xattr for non-admin

[Sasha Levin]

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit a082c6f680da298cf075886ff032f32ccb7c5e1a ]

Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.

Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/overlayfs/inode.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 6d52041d13cf..df5c2853c4e5 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -258,6 +258,16 @@ ssize_t ovl_getxattr(struct dentry *dentry, const char *name,
 	return vfs_getxattr(realpath.dentry, name, value, size);
 }
 
+static bool ovl_can_list(const char *s)
+{
+	/* List all non-trusted xatts */
+	if (strncmp(s, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) != 0)
+		return true;
+
+	/* Never list trusted.overlay, list other trusted for superuser only */
+	return !ovl_is_private_xattr(s) && capable(CAP_SYS_ADMIN);
+}
+
 ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
 {
 	struct path realpath;
@@ -282,7 +292,7 @@ ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
 			return -EIO;
 
 		len -= slen;
-		if (ovl_is_private_xattr(s)) {
+		if (!ovl_can_list(s)) {
 			res -= slen;
 			memmove(s, s + slen, len);
 		} else {
-- 
2.14.1

[PATCH AUTOSEL for 3.18 057/102] powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE]

[Sasha Levin]

From: Ivan Mikhaylov <ivan@de.ibm.com>

[ Upstream commit 6e2f03e292ef46eed2b31b0a344a91d514f9cd81 ]

Prevent a kernel panic caused by unintentionally clearing TCR watchdog
bits. At this point in the kernel boot, the watchdog may have already
been enabled by u-boot. The original code's attempt to write to the TCR
register results in an inadvertent clearing of the watchdog
configuration bits, causing the 476 to reset.

Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kernel/time.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 7505599c2593..a3d0109becd3 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -646,12 +646,20 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
 static void start_cpu_decrementer(void)
 {
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	unsigned int tcr;
+
 	/* Clear any pending timer interrupts */
 	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
 
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
+	tcr = mfspr(SPRN_TCR);
+	/*
+	 * The watchdog may have already been enabled by u-boot. So leave
+	 * TRC[WP] (Watchdog Period) alone.
+	 */
+	tcr &= TCR_WP_MASK;	/* Clear all bits except for TCR[WP] */
+	tcr |= TCR_DIE;		/* Enable decrementer */
+	mtspr(SPRN_TCR, tcr);
+#endif
 }
 
 void __init generic_calibrate_decr(void)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 058/102] arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 5f16a046f8e144c294ef98cd29d9458b5f8273e5 ]

FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg
field as a shift value, potentially leading to a left shift value that
is negative or with an absolute value that is significantly larger then
the size of the type. UBSAN chokes with:

================================================================================
UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13
shift exponent -1 is negative
CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11
Hardware name: linux,dummy-virt (DT)
Call trace:
[<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73
[<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228
[<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline]
[<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52
[<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164
[<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421
[<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline]
[<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline]
[<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231
[<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline]
[<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249
[<ffff200008084770>] el0_svc_naked+0x24/0x28
================================================================================
syz-executor1 uses obsolete (PF_INET,SOCK_PACKET)
sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT

This patch attempts to fix some of this by:

  * Making encoded_op an unsigned type, so we can shift it left even if
    the top bit is set.

  * Casting to signed prior to shifting right when extracting oparg
    and cmparg

  * Consider only the bottom 5 bits of oparg when using it as a left-shift
    value.

Whilst I think this catches all of the issues, I'd much prefer to remove
this stuff, as I think it's unused and the bugs are copy-pasted between
a bunch of architectures.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/include/asm/futex.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
index 5f750dc96e0f..49d057eb93d6 100644
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@@ -44,16 +44,16 @@
 	: "memory")
 
 static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr)
 {
 	int op = (encoded_op >> 28) & 7;
 	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
+	int oparg = (int)(encoded_op << 8) >> 20;
+	int cmparg = (int)(encoded_op << 20) >> 20;
 	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
+		oparg = 1U << (oparg & 0x1f);
 
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 059/102] rtc: interface: Validate alarm-time before handling rollover

[Sasha Levin]

From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>

[ Upstream commit da96aea0ed177105cb13ee83b328f6c61e061d3f ]

In function __rtc_read_alarm() its possible for an alarm time-stamp to
be invalid even after replacing missing components with current
time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this
case and will cause the call to 'rtc_tm_to_time64(&alarm->time)'
return a negative value for variable t_alm.

While handling alarm rollover this negative t_alm (assumed to seconds
offset from '1970-01-01 00:00:00') is converted back to rtc_time via
rtc_time64_to_tm() which results in this error log with seemingly
garbage values:

"rtc rtc0: invalid alarm value: -2-1--1041528741
2005511117:71582844:32"

This error was generated when the rtc driver (rtc-opal in this case)
returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that
the alarm is disabled. Though I have submitted a separate fix for the
rtc-opal driver, this issue may potentially impact other
existing/future rtc drivers.

To fix this issue the patch validates the alarm time-stamp just after
filling up the missing datetime components and if rtc_valid_tm() still
reports it to be invalid then bails out of the function without
handling the rollover.

Reported-by: Steve Best <sbest@redhat.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/interface.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 5b2717f5dafa..d4153892c120 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -249,6 +249,13 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 			missing = year;
 	}
 
+	/* Can't proceed if alarm is still invalid after replacing
+	 * missing fields.
+	 */
+	err = rtc_valid_tm(&alarm->time);
+	if (err)
+		goto done;
+
 	/* with luck, no rollover is needed */
 	rtc_tm_to_time(&now, &t_now);
 	rtc_tm_to_time(&alarm->time, &t_alm);
@@ -300,9 +307,9 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 		dev_warn(&rtc->dev, "alarm rollover not handled\n");
 	}
 
-done:
 	err = rtc_valid_tm(&alarm->time);
 
+done:
 	if (err) {
 		dev_warn(&rtc->dev, "invalid alarm value: %d-%d-%d %d:%d:%d\n",
 			alarm->time.tm_year + 1900, alarm->time.tm_mon + 1,
-- 
2.14.1

[PATCH AUTOSEL for 3.18 060/102] net: freescale: fix potential null pointer dereference

[Sasha Levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 ]

Add NULL check before dereferencing pointer _id_ in order to avoid
a potential NULL pointer dereference.

Addresses-Coverity-ID: 1397995
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 964c6bf37710..4b9f5074ec32 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -370,7 +370,7 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *id =
 		of_match_device(fsl_pq_mdio_match, &pdev->dev);
-	const struct fsl_pq_mdio_data *data = id->data;
+	const struct fsl_pq_mdio_data *data;
 	struct device_node *np = pdev->dev.of_node;
 	struct resource res;
 	struct device_node *tbi;
@@ -378,6 +378,13 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev)
 	struct mii_bus *new_bus;
 	int err;
 
+	if (!id) {
+		dev_err(&pdev->dev, "Failed to match device\n");
+		return -ENODEV;
+	}
+
+	data = id->data;
+
 	dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible);
 
 	new_bus = mdiobus_alloc_size(sizeof(*priv));
-- 
2.14.1

[PATCH AUTOSEL for 3.18 061/102] KVM: SVM: do not zero out segment attributes if segment is unusable or not present

[Sasha Levin]

From: Roman Pen <roman.penyaev@profitbricks.com>

[ Upstream commit d9c1b5431d5f0e07575db785a022bce91051ac1d ]

This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt
was taken on userspace stack.  The root cause lies in the specific AMD CPU
behaviour which manifests itself as unusable segment attributes on SYSRET.
The corresponding work around for the kernel is the following:

61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue")

In other turn virtualization side treated unusable segment incorrectly and
restored CPL from SS attributes, which were zeroed out few lines above.

In current patch it is assured only that P bit is cleared in VMCB.save state
and segment attributes are not zeroed out if segment is not presented or is
unusable, therefore CPL can be safely restored from DPL field.

This is only one part of the fix, since QEMU side should be fixed accordingly
not to zero out attributes on its side.  Corresponding patch will follow.

[1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com

Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Mikhail Sennikovskii <mikhail.sennikovskii@profitbricks.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kvm/svm.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 36414d13289f..2e0c64a08549 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1467,6 +1467,7 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 		 */
 		if (var->unusable)
 			var->db = 0;
+		/* This is symmetric with svm_set_segment() */
 		var->dpl = to_svm(vcpu)->vmcb->save.cpl;
 		break;
 	}
@@ -1611,18 +1612,14 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 	s->base = var->base;
 	s->limit = var->limit;
 	s->selector = var->selector;
-	if (var->unusable)
-		s->attrib = 0;
-	else {
-		s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK);
-		s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT;
-		s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT;
-		s->attrib |= (var->present & 1) << SVM_SELECTOR_P_SHIFT;
-		s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT;
-		s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT;
-		s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT;
-		s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT;
-	}
+	s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK);
+	s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT;
+	s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT;
+	s->attrib |= ((var->present & 1) && !var->unusable) << SVM_SELECTOR_P_SHIFT;
+	s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT;
+	s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT;
+	s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT;
+	s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT;
 
 	/*
 	 * This is always accurate, except if SYSRET returned to a segment
@@ -1631,7 +1628,8 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 	 * would entail passing the CPL to userspace and back.
 	 */
 	if (seg == VCPU_SREG_SS)
-		svm->vmcb->save.cpl = (s->attrib >> SVM_SELECTOR_DPL_SHIFT) & 3;
+		/* This is symmetric with svm_get_segment() */
+		svm->vmcb->save.cpl = (var->dpl & 3);
 
 	mark_dirty(svm->vmcb, VMCB_SEG);
 }
-- 
2.14.1

[PATCH AUTOSEL for 3.18 062/102] powerpc/spufs: Fix coredump of SPU contexts

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 99acc9bede06bbb2662aafff51f5b9e529fa845e ]

If a process dumps core while it has SPU contexts active then we have
code to also dump information about the SPU contexts.

Unfortunately it's been broken for 3 1/2 years, and we didn't notice. In
commit 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers") the nread
variable was removed and rc used instead. That means when the loop exits
successfully, rc has the number of bytes read, but it's then used as the
return value for the function, which should return 0 on success.

So fix it by setting rc = 0 before returning in the success case.

Fixes: 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/platforms/cell/spufs/coredump.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index be6212ddbf06..7e42e3ec2142 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -174,6 +174,8 @@ static int spufs_arch_write_note(struct spu_context *ctx, int i,
 	if (!dump_skip(cprm,
 		       roundup(cprm->written - total + sz, 4) - cprm->written))
 		goto Eio;
+
+	rc = 0;
 out:
 	free_page((unsigned long)buf);
 	return rc;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 063/102] perf trace: Add mmap alias for s390

[Sasha Levin]

From: Jiri Olsa <jolsa@kernel.org>

[ Upstream commit 54265664c15a68905d8d67d19205e9a767636434 ]

The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap.  For this
reason perf trace can't find the proper syscall event to get args format
from and displays it wrongly as 'continued'.

To fix that fill the "alias" field with "old_mmap" for trace's mmap record
to get the correct translation.

Before:
     0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90                ) = 0
     0.042 ( 0.028 ms): vest/43052  ... [continued]: mmap()) = 0x3fffd6e2000
     0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096        ) = 6

After:
     0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930                           ) = 0
     0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858                                ) = 0x3fffd14a000
     0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096                   ) = 6

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/builtin-trace.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index fb126459b134..7e74d8aea99b 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -1020,6 +1020,10 @@ static struct syscall_fmt {
 	{ .name	    = "mlockall",   .errmsg = true,
 	  .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, },
 	{ .name	    = "mmap",	    .hexret = true,
+/* The standard mmap maps to old_mmap on s390x */
+#if defined(__s390x__)
+	.alias = "old_mmap",
+#endif
 	  .arg_scnprintf = { [0] = SCA_HEX,	  /* addr */
 			     [2] = SCA_MMAP_PROT, /* prot */
 			     [3] = SCA_MMAP_FLAGS, /* flags */
-- 
2.14.1

[PATCH AUTOSEL for 3.18 064/102] qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@163.com>

[ Upstream commit 5ea6d691aac6c93b790f0905e3460d44cc4c449b ]

The driver may sleep under a write spin lock, and the function
call path is:
qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave)
  crb_win_lock
    qlcnic_pcie_sem_lock
      usleep_range
qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave)
  crb_win_lock
    qlcnic_pcie_sem_lock
      usleep_range

To fix it, the usleep_range is replaced with udelay.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 69b46c051cc0..3295580b3aa0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -341,7 +341,7 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg)
 			}
 			return -EIO;
 		}
-		usleep_range(1000, 1500);
+		udelay(1200);
 	}
 
 	if (id_reg)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 065/102] mISDN: Fix a sleep-in-atomic bug

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@163.com>

[ Upstream commit 93818da5eed63fbc17b64080406ea53b86b23309 ]

The driver may sleep under a read spin lock, and the function call path is:
send_socklist (acquire the lock by read_lock)
  skb_copy(GFP_KERNEL) --> may sleep

To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/isdn/mISDN/stack.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index 9cb4b621fbc3..b92a19a594a1 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -72,7 +72,7 @@ send_socklist(struct mISDN_sock_list *sl, struct sk_buff *skb)
 		if (sk->sk_state != MISDN_BOUND)
 			continue;
 		if (!cskb)
-			cskb = skb_copy(skb, GFP_KERNEL);
+			cskb = skb_copy(skb, GFP_ATOMIC);
 		if (!cskb) {
 			printk(KERN_WARNING "%s no skb\n", __func__);
 			break;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 066/102] drm/omap: fix tiled buffer stride calculations

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit cc8dd7661ccc2d8dc88921da8e6cc7c2fcdb0341 ]

omap_gem uses page alignment for buffer stride. The related calculations
are a bit off, though, as byte stride of 4096 gets aligned to 8192,
instead of 4096.

This patch changes the code to use DIV_ROUND_UP(), which fixes those
calculations and makes them more readable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/omapdrm/omap_gem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_gem.c b/drivers/gpu/drm/omapdrm/omap_gem.c
index e4849413ee80..4f745c11d955 100644
--- a/drivers/gpu/drm/omapdrm/omap_gem.c
+++ b/drivers/gpu/drm/omapdrm/omap_gem.c
@@ -158,7 +158,7 @@ static void evict_entry(struct drm_gem_object *obj,
 	size_t size = PAGE_SIZE * n;
 	loff_t off = mmap_offset(obj) +
 			(entry->obj_pgoff << PAGE_SHIFT);
-	const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE);
+	const int m = DIV_ROUND_UP(omap_obj->width << fmt, PAGE_SIZE);
 
 	if (m > 1) {
 		int i;
@@ -415,7 +415,7 @@ static int fault_2d(struct drm_gem_object *obj,
 	 * into account in some of the math, so figure out virtual stride
 	 * in pages
 	 */
-	const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE);
+	const int m = DIV_ROUND_UP(omap_obj->width << fmt, PAGE_SIZE);
 
 	/* We don't use vmf->pgoff since that has the fake offset: */
 	pgoff = ((unsigned long)vmf->virtual_address -
-- 
2.14.1

[PATCH AUTOSEL for 3.18 067/102] Fix serial console on SNI RM400 machines

[Sasha Levin]

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

[ Upstream commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d ]

sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK
is disabled. Correct usage of clk API to make it work with/without it.

Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock)

Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/serial/sccnxp.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 75850f70b479..72f4146e8eed 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev)
 
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
-		if (PTR_ERR(clk) == -EPROBE_DEFER) {
-			ret = -EPROBE_DEFER;
+		ret = PTR_ERR(clk);
+		if (ret == -EPROBE_DEFER)
 			goto err_out;
-		}
+		uartclk = 0;
+	} else {
+		clk_prepare_enable(clk);
+		uartclk = clk_get_rate(clk);
+	}
+
+	if (!uartclk) {
 		dev_notice(&pdev->dev, "Using default clock frequency\n");
 		uartclk = s->chip->freq_std;
-	} else
-		uartclk = clk_get_rate(clk);
+	}
 
 	/* Check input frequency */
 	if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
-- 
2.14.1

[PATCH AUTOSEL for 3.18 068/102] bio-integrity: Do not allocate integrity context for bio w/o data

[Sasha Levin]

From: Dmitry Monakhov <dmonakhov@openvz.org>

[ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ]

If bio has no data, such as ones from blkdev_issue_flush(),
then we have nothing to protect.

This patch prevent bugon like follows:

kfree_debugcheck: out of range ptr ac1fa1d106742a5ah
kernel BUG at mm/slab.c:2773!
invalid opcode: 0000 [#1] SMP
Modules linked in: bcache
CPU: 0 PID: 4428 Comm: xfs_io Tainted: G        W       4.11.0-rc4-ext4-00041-g2ef0043-dirty #43
Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014
task: ffff880137786440 task.stack: ffffc90000ba8000
RIP: 0010:kfree_debugcheck+0x25/0x2a
RSP: 0018:ffffc90000babde0 EFLAGS: 00010082
RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40
RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282
R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001
FS:  00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0
Call Trace:
 kfree+0xc8/0x1b3
 bio_integrity_free+0xc3/0x16b
 bio_free+0x25/0x66
 bio_put+0x14/0x26
 blkdev_issue_flush+0x7a/0x85
 blkdev_fsync+0x35/0x42
 vfs_fsync_range+0x8e/0x9f
 vfs_fsync+0x1c/0x1e
 do_fsync+0x31/0x4a
 SyS_fsync+0x10/0x14
 entry_SYSCALL_64_fastpath+0x1f/0xc2

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/bio-integrity.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 5cbd5d9ea61d..d9f4b3caaa41 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -165,6 +165,9 @@ bool bio_integrity_enabled(struct bio *bio)
 	if (!bio_is_rw(bio))
 		return false;
 
+	if (!bio_sectors(bio))
+		return false;
+
 	/* Already protected? */
 	if (bio_integrity(bio))
 		return false;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 069/102] skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ]

This is a defense-in-depth measure in response to bugs like
4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's
not only a potential overflow of sglist items, but also a stack overflow
potential, so we fix this by limiting the amount of recursion this function
is allowed to do. Not actually providing a bounded base case is a future
disaster that we can easily avoid here.

As a small matter of house keeping, we take this opportunity to move the
documentation comment over the actual function the documentation is for.

While this could be implemented by using an explicit stack of skbuffs,
when implementing this, the function complexity increased considerably,
and I don't think such complexity and bloat is actually worth it. So,
instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS,
and measured the stack usage there. I also reverted the recent MIPS
changes that give it a separate IRQ stack, so that I could experience
some worst-case situations. I found that limiting it to 24 layers deep
yielded a good stack usage with room for safety, as well as being much
deeper than any driver actually ever creates.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/linux/skbuff.h |  8 +++----
 net/core/skbuff.c      | 65 ++++++++++++++++++++++++++++++++------------------
 2 files changed, 46 insertions(+), 27 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index e5ba0236047e..008a270faf26 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -845,10 +845,10 @@ struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
 				     unsigned int headroom);
 struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom,
 				int newtailroom, gfp_t priority);
-int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg,
-			int offset, int len);
-int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset,
-		 int len);
+int __must_check skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg,
+				     int offset, int len);
+int __must_check skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg,
+			      int offset, int len);
 int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer);
 int skb_pad(struct sk_buff *skb, int pad);
 #define dev_kfree_skb(a)	consume_skb(a)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9c830242a1f9..86c7007f129d 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3285,24 +3285,18 @@ void __init skb_init(void)
 						NULL);
 }
 
-/**
- *	skb_to_sgvec - Fill a scatter-gather list from a socket buffer
- *	@skb: Socket buffer containing the buffers to be mapped
- *	@sg: The scatter-gather list to map into
- *	@offset: The offset into the buffer's contents to start mapping
- *	@len: Length of buffer space to be mapped
- *
- *	Fill the specified scatter-gather list with mappings/pointers into a
- *	region of the buffer space attached to a socket buffer.
- */
 static int
-__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len,
+	       unsigned int recursion_level)
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
 	struct sk_buff *frag_iter;
 	int elt = 0;
 
+	if (unlikely(recursion_level >= 24))
+		return -EMSGSIZE;
+
 	if (copy > 0) {
 		if (copy > len)
 			copy = len;
@@ -3321,6 +3315,8 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 		end = start + skb_frag_size(&skb_shinfo(skb)->frags[i]);
 		if ((copy = end - offset) > 0) {
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			if (unlikely(elt && sg_is_last(&sg[elt - 1])))
+				return -EMSGSIZE;
 
 			if (copy > len)
 				copy = len;
@@ -3335,16 +3331,22 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 	}
 
 	skb_walk_frags(skb, frag_iter) {
-		int end;
+		int end, ret;
 
 		WARN_ON(start > offset + len);
 
 		end = start + frag_iter->len;
 		if ((copy = end - offset) > 0) {
+			if (unlikely(elt && sg_is_last(&sg[elt - 1])))
+				return -EMSGSIZE;
+
 			if (copy > len)
 				copy = len;
-			elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start,
-					      copy);
+			ret = __skb_to_sgvec(frag_iter, sg+elt, offset - start,
+					      copy, recursion_level + 1);
+			if (unlikely(ret < 0))
+				return ret;
+			elt += ret;
 			if ((len -= copy) == 0)
 				return elt;
 			offset += copy;
@@ -3355,6 +3357,31 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 	return elt;
 }
 
+/**
+ *	skb_to_sgvec - Fill a scatter-gather list from a socket buffer
+ *	@skb: Socket buffer containing the buffers to be mapped
+ *	@sg: The scatter-gather list to map into
+ *	@offset: The offset into the buffer's contents to start mapping
+ *	@len: Length of buffer space to be mapped
+ *
+ *	Fill the specified scatter-gather list with mappings/pointers into a
+ *	region of the buffer space attached to a socket buffer. Returns either
+ *	the number of scatterlist items used, or -EMSGSIZE if the contents
+ *	could not fit.
+ */
+int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+{
+	int nsg = __skb_to_sgvec(skb, sg, offset, len, 0);
+
+	if (nsg <= 0)
+		return nsg;
+
+	sg_mark_end(&sg[nsg - 1]);
+
+	return nsg;
+}
+EXPORT_SYMBOL_GPL(skb_to_sgvec);
+
 /* As compared with skb_to_sgvec, skb_to_sgvec_nomark only map skb to given
  * sglist without mark the sg which contain last skb data as the end.
  * So the caller can mannipulate sg list as will when padding new data after
@@ -3377,19 +3404,11 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg,
 			int offset, int len)
 {
-	return __skb_to_sgvec(skb, sg, offset, len);
+	return __skb_to_sgvec(skb, sg, offset, len, 0);
 }
 EXPORT_SYMBOL_GPL(skb_to_sgvec_nomark);
 
-int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
-{
-	int nsg = __skb_to_sgvec(skb, sg, offset, len);
 
-	sg_mark_end(&sg[nsg - 1]);
-
-	return nsg;
-}
-EXPORT_SYMBOL_GPL(skb_to_sgvec);
 
 /**
  *	skb_cow_data - Check that a socket buffer's data buffers are writable
-- 
2.14.1

[PATCH AUTOSEL for 3.18 070/102] net/mlx4: Fix the check in attaching steering rules

[Sasha Levin]

From: Talat Batheesh <talatb@mellanox.com>

[ Upstream commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 ]

Our previous patch (cited below) introduced a regression
for RAW Eth QPs.

Fix it by checking if the QP number provided by user-space
exists, hence allowing steering rules to be added for valid
QPs only.

Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring")
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |  5 -----
 drivers/net/ethernet/mellanox/mlx4/mcg.c        | 15 +++++++++++----
 drivers/net/ethernet/mellanox/mlx4/qp.c         | 13 +++++++++++++
 include/linux/mlx4/qp.h                         |  1 +
 4 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 17b3950e04a7..ae83da9cd18a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -946,11 +946,6 @@ static int mlx4_en_flow_replace(struct net_device *dev,
 		qpn = priv->drop_qp.qpn;
 	else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) {
 		qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1);
-		if (qpn < priv->rss_map.base_qpn ||
-		    qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) {
-			en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn);
-			return -EINVAL;
-		}
 	} else {
 		if (cmd->fs.ring_cookie >= priv->rx_ring_num) {
 			en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n",
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index 872843179f44..c704e7bcda9d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -35,6 +35,7 @@
 #include <linux/etherdevice.h>
 
 #include <linux/mlx4/cmd.h>
+#include <linux/mlx4/qp.h>
 #include <linux/export.h>
 
 #include "mlx4.h"
@@ -985,16 +986,21 @@ int mlx4_flow_attach(struct mlx4_dev *dev,
 	if (IS_ERR(mailbox))
 		return PTR_ERR(mailbox);
 
+	if (!mlx4_qp_lookup(dev, rule->qpn)) {
+		mlx4_err_rule(dev, "QP doesn't exist\n", rule);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	trans_rule_ctrl_to_hw(rule, mailbox->buf);
 
 	size += sizeof(struct mlx4_net_trans_rule_hw_ctrl);
 
 	list_for_each_entry(cur, &rule->list, list) {
 		ret = parse_trans_rule(dev, cur, mailbox->buf + size);
-		if (ret < 0) {
-			mlx4_free_cmd_mailbox(dev, mailbox);
-			return ret;
-		}
+		if (ret < 0)
+			goto out;
+
 		size += ret;
 	}
 
@@ -1006,6 +1012,7 @@ int mlx4_flow_attach(struct mlx4_dev *dev,
 	else if (ret)
 		mlx4_err_rule(dev, "Fail to register network rule\n", rule);
 
+out:
 	mlx4_free_cmd_mailbox(dev, mailbox);
 
 	return ret;
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index b295eeb2af69..87e00742d401 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -358,6 +358,19 @@ static void mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
 		__mlx4_qp_free_icm(dev, qpn);
 }
 
+struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn)
+{
+	struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table;
+	struct mlx4_qp *qp;
+
+	spin_lock(&qp_table->lock);
+
+	qp = __mlx4_qp_lookup(dev, qpn);
+
+	spin_unlock(&qp_table->lock);
+	return qp;
+}
+
 int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp, gfp_t gfp)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 5f4e36cf0091..30a73892a8d6 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -437,6 +437,7 @@ struct mlx4_update_qp_params {
 	u32	flags;
 };
 
+struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn);
 int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn,
 		   enum mlx4_update_qp_attr attr,
 		   struct mlx4_update_qp_params *params);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 071/102] perf report: Ensure the perf DSO mapping matches what libdw sees

[Sasha Levin]

From: Milian Wolff <milian.wolff@kdab.com>

[ Upstream commit 2538b9e2450ae255337c04356e9e0f8cb9ec48d9 ]

In some situations the libdw unwinder stopped working properly.  I.e.
with libunwind we see:

~~~~~
heaptrack_gui  2228 135073.400112:     641314 cycles:
	            e8ed _dl_fixup (/usr/lib/ld-2.25.so)
	           15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
	           ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
	           608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
	            f199 call_init.part.0 (/usr/lib/ld-2.25.so)
	            f2a5 _dl_init (/usr/lib/ld-2.25.so)
	             db9 _dl_start_user (/usr/lib/ld-2.25.so)
~~~~~

But with libdw and without this patch this sample is not properly
unwound:

~~~~~
heaptrack_gui  2228 135073.400112:     641314 cycles:
	            e8ed _dl_fixup (/usr/lib/ld-2.25.so)
	           15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
	           ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
~~~~~

Debug output showed me that libdw found a module for the last frame
address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch
double-checks what libdw sees and what perf knows. If the mappings
mismatch, we now report the elf known to perf. This fixes the situation
above, and the libdw unwinder produces the same stack as libunwind.

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/util/unwind-libdw.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c
index 7419768c38b1..dbd9954eda4a 100644
--- a/tools/perf/util/unwind-libdw.c
+++ b/tools/perf/util/unwind-libdw.c
@@ -37,6 +37,14 @@ static int __report_module(struct addr_location *al, u64 ip,
 		return 0;
 
 	mod = dwfl_addrmodule(ui->dwfl, ip);
+	if (mod) {
+		Dwarf_Addr s;
+
+		dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL);
+		if (s != al->map->start)
+			mod = 0;
+	}
+
 	if (!mod)
 		mod = dwfl_report_elf(ui->dwfl, dso->short_name,
 				      dso->long_name, -1, al->map->start,
-- 
2.14.1

[PATCH AUTOSEL for 3.18 072/102] tags: honor COMPILED_SOURCE with apart output directory

[Sasha Levin]

From: Robert Jarzmik <robert.jarzmik@free.fr>

[ Upstream commit cbf52a3e6a8a92beec6e0c70abf4111cd8f8faf7 ]

When the kernel is compiled with an "O=" argument, the object files are
not in the source tree, but in the build tree.

This patch fixes O= build by looking for object files in the build tree.

Fixes: 923e02ecf3f8 ("scripts/tags.sh: Support compiled source")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/tags.sh | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/tags.sh b/scripts/tags.sh
index cdb491d84503..7056322b53f0 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -106,6 +106,7 @@ all_compiled_sources()
 		case "$i" in
 			*.[cS])
 				j=${i/\.[cS]/\.o}
+				j="${j#$tree}"
 				if [ -e $j ]; then
 					echo $i
 				fi
-- 
2.14.1

[PATCH AUTOSEL for 3.18 073/102] e1000e: fix race condition around skb_tstamp_tx()

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 5012863b7347866764c4a4e58b62fb05346b0d06 ]

The e1000e driver and related hardware has a limitation on Tx PTP
packets which requires we limit to timestamping a single packet at once.
We do this by verifying that we never request a new Tx timestamp while
we still have a tx_hwtstamp_skb pointer.

Unfortunately the driver suffers from a race condition around this. The
tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx()
is called. This function notifies the stack and applications of a new
timestamp. Even a well behaved application that only sends a new request
when the first one is finished might be woken up and possibly send
a packet before we can free the timestamp in the driver again. The
result is that we needlessly ignore some Tx timestamp requests in this
corner case.

Fix this by assigning the tx_hwtstamp_skb pointer prior to calling
skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb
until that function finishes. This ensures that the application is not
woken up until the driver is ready to begin timestamping a new packet.

This ensures that well behaved applications do not accidentally race
with condition to skip Tx timestamps. Obviously an application which
sends multiple Tx timestamp requests at once will still only timestamp
one packet at a time. Unfortunately there is nothing we can do about
this.

Reported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 081dad4e0178..15099a58fcee 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1181,6 +1181,7 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work)
 	struct e1000_hw *hw = &adapter->hw;
 
 	if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
+		struct sk_buff *skb = adapter->tx_hwtstamp_skb;
 		struct skb_shared_hwtstamps shhwtstamps;
 		u64 txstmp;
 
@@ -1189,9 +1190,14 @@ static void e1000e_tx_hwtstamp_work(struct work_struct *work)
 
 		e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
 
-		skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
-		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+		/* Clear the global tx_hwtstamp_skb pointer and force writes
+		 * prior to notifying the stack of a Tx timestamp.
+		 */
 		adapter->tx_hwtstamp_skb = NULL;
+		wmb(); /* force write prior to skb_tstamp_tx */
+
+		skb_tstamp_tx(skb, &shhwtstamps);
+		dev_kfree_skb_any(skb);
 	} else if (time_after(jiffies, adapter->tx_hwtstamp_start
 			      + adapter->tx_timeout_factor * HZ)) {
 		dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 074/102] [media] cx25840: fix unchecked return values

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 35378ce143071c2a6bad4b59a000e9b9f8f6ea67 ]

In functions cx25840_initialize(), cx231xx_initialize(), and
cx23885_initialize(), the return value of create_singlethread_workqueue()
is used without validation. This may result in NULL dereference and cause
kernel crash. This patch fixes it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/i2c/cx25840/cx25840-core.c | 36 +++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index e453a3ffe7d1..50255128ec33 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -420,11 +420,13 @@ static void cx25840_initialize(struct i2c_client *client)
 	INIT_WORK(&state->fw_work, cx25840_work_handler);
 	init_waitqueue_head(&state->fw_wait);
 	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
+	if (q) {
+		prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
+		queue_work(q, &state->fw_work);
+		schedule();
+		finish_wait(&state->fw_wait, &wait);
+		destroy_workqueue(q);
+	}
 
 	/* 6. */
 	cx25840_write(client, 0x115, 0x8c);
@@ -631,11 +633,13 @@ static void cx23885_initialize(struct i2c_client *client)
 	INIT_WORK(&state->fw_work, cx25840_work_handler);
 	init_waitqueue_head(&state->fw_wait);
 	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
+	if (q) {
+		prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
+		queue_work(q, &state->fw_work);
+		schedule();
+		finish_wait(&state->fw_wait, &wait);
+		destroy_workqueue(q);
+	}
 
 	/* Call the cx23888 specific std setup func, we no longer rely on
 	 * the generic cx24840 func.
@@ -746,11 +750,13 @@ static void cx231xx_initialize(struct i2c_client *client)
 	INIT_WORK(&state->fw_work, cx25840_work_handler);
 	init_waitqueue_head(&state->fw_wait);
 	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
+	if (q) {
+		prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
+		queue_work(q, &state->fw_work);
+		schedule();
+		finish_wait(&state->fw_wait, &wait);
+		destroy_workqueue(q);
+	}
 
 	cx25840_std_setup(client);
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 075/102] [media] mceusb: sporadic RX truncation corruption fix

[Sasha Levin]

From: A Sun <as1033x@comcast.net>

[ Upstream commit 8e175b22e8640bf3a58e071af54190b909e4a944 ]

Intermittent RX truncation and loss of IR received data. This resulted
in receive stream synchronization errors where driver attempted to
incorrectly parse IR data (eg 0x90 below) as command response.

[ 3969.139898] mceusb 1-1.2:1.0: processed IR data
[ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2)
[ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90
[ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25)
[ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples
[ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000

Bug trigger appears to be normal, but heavy, IR receiver use.

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/rc/mceusb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index f838d9c7ed12..0fba4a2c1602 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1370,8 +1370,13 @@ static int mceusb_dev_probe(struct usb_interface *intf,
 		goto rc_dev_fail;
 
 	/* wire up inbound data handler */
-	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp,
-				mceusb_dev_recv, ir, ep_in->bInterval);
+	if (usb_endpoint_xfer_int(ep_in))
+		usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp,
+				 mceusb_dev_recv, ir, ep_in->bInterval);
+	else
+		usb_fill_bulk_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp,
+				  mceusb_dev_recv, ir);
+
 	ir->urb_in->transfer_dma = ir->dma_in;
 	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 076/102] net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 41408ad519f7a2a1c5229e61f2a97f4df1b61adc ]

Avoid calling genphy_aneg_done() for PHYs that do not implement the
Clause 22 register set.

Clause 45 PHYs may implement the Clause 22 register set along with the
Clause 22 extension MMD.  Hence, we can't simply block access to the
Clause 22 functions based on the PHY being a Clause 45 PHY.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/phy.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7ae062743bad..59a6973fe760 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -123,6 +123,12 @@ static inline int phy_aneg_done(struct phy_device *phydev)
 	if (phydev->drv->aneg_done)
 		return phydev->drv->aneg_done(phydev);
 
+	/* Avoid genphy_aneg_done() if the Clause 45 PHY does not
+	 * implement Clause 22 registers
+	 */
+	if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
+		return -EINVAL;
+
 	return genphy_aneg_done(phydev);
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 077/102] e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 833521ebc65b1c3092e5c0d8a97092f98eec595d ]

An error during suspend (e100e_pm_suspend),

[  429.994338] ACPI : EC: event blocked
[  429.994633] e1000e: EEE TX LPI TIMER: 00000011
[  430.955451] pci_pm_suspend(): e1000e_pm_suspend+0x0/0x30 [e1000e] returns -2
[  430.955454] dpm_run_callback(): pci_pm_suspend+0x0/0x140 returns -2
[  430.955458] PM: Device 0000:00:19.0 failed to suspend async: error -2
[  430.955581] PM: Some devices failed to suspend, or early wake event detected
[  430.957709] ACPI : EC: event unblocked

lead to complete failure:

[  432.585002] ------------[ cut here ]------------
[  432.585013] WARNING: CPU: 3 PID: 8372 at kernel/irq/manage.c:1478 __free_irq+0x9f/0x280
[  432.585015] Trying to free already-free IRQ 20
[  432.585016] Modules linked in: cdc_ncm usbnet x86_pkg_temp_thermal intel_powerclamp coretemp mii crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep lpc_ich snd_hda_core snd_pcm mei_me mei sdhci_pci sdhci i915 mmc_core e1000e ptp pps_core prime_numbers
[  432.585042] CPU: 3 PID: 8372 Comm: kworker/u16:40 Tainted: G     U          4.10.0-rc8-CI-Patchwork_3870+ #1
[  432.585044] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012
[  432.585050] Workqueue: events_unbound async_run_entry_fn
[  432.585051] Call Trace:
[  432.585058]  dump_stack+0x67/0x92
[  432.585062]  __warn+0xc6/0xe0
[  432.585065]  warn_slowpath_fmt+0x4a/0x50
[  432.585070]  ? _raw_spin_lock_irqsave+0x49/0x60
[  432.585072]  __free_irq+0x9f/0x280
[  432.585075]  free_irq+0x34/0x80
[  432.585089]  e1000_free_irq+0x65/0x70 [e1000e]
[  432.585098]  e1000e_pm_freeze+0x7a/0xb0 [e1000e]
[  432.585106]  e1000e_pm_suspend+0x21/0x30 [e1000e]
[  432.585113]  pci_pm_suspend+0x71/0x140
[  432.585118]  dpm_run_callback+0x6f/0x330
[  432.585122]  ? pci_pm_freeze+0xe0/0xe0
[  432.585125]  __device_suspend+0xea/0x330
[  432.585128]  async_suspend+0x1a/0x90
[  432.585132]  async_run_entry_fn+0x34/0x160
[  432.585137]  process_one_work+0x1f4/0x6d0
[  432.585140]  ? process_one_work+0x16e/0x6d0
[  432.585143]  worker_thread+0x49/0x4a0
[  432.585145]  kthread+0x107/0x140
[  432.585148]  ? process_one_work+0x6d0/0x6d0
[  432.585150]  ? kthread_create_on_node+0x40/0x40
[  432.585154]  ret_from_fork+0x2e/0x40
[  432.585156] ---[ end trace 6712df7f8c4b9124 ]---

The unwind failures stems from commit 2800209994f8 ("e1000e: Refactor PM
flows"), but it may be a later patch that introduced the non-recoverable
behaviour.

Fixes: 2800209994f8 ("e1000e: Refactor PM flows")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99847
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 15099a58fcee..383e445116c9 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6357,12 +6357,17 @@ static int e1000e_pm_thaw(struct device *dev)
 static int e1000e_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
+	int rc;
 
 	e1000e_flush_lpic(pdev);
 
 	e1000e_pm_freeze(dev);
 
-	return __e1000_shutdown(pdev, false);
+	rc = __e1000_shutdown(pdev, false);
+	if (rc)
+		e1000e_pm_thaw(dev);
+
+	return rc;
 }
 
 static int e1000e_pm_resume(struct device *dev)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 078/102] perf/core: Correct event creation with PERF_FORMAT_GROUP

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit ba5213ae6b88fb170c4771fef6553f759c7d8cdd ]

Andi was asking about PERF_FORMAT_GROUP vs inherited events, which led
to the discovery of a bug from commit:

  3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff")

 -       PERF_SAMPLE_GROUP                       = 1U << 4,
 +       PERF_SAMPLE_READ                        = 1U << 4,

 -       if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
 +       if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))

is a clear fail :/

While this changes user visible behaviour; it was previously possible
to create an inherited event with PERF_SAMPLE_READ; this is deemed
acceptible because its results were always incorrect.

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Fixes:  3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff")
Link: http://lkml.kernel.org/r/20170530094512.dy2nljns2uq7qa3j@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 kernel/events/core.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index de3303aab7d6..9eb7710914fb 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4861,9 +4861,6 @@ static void perf_output_read_one(struct perf_output_handle *handle,
 	__output_copy(handle, values, n * sizeof(u64));
 }
 
-/*
- * XXX PERF_FORMAT_GROUP vs inherited events seems difficult.
- */
 static void perf_output_read_group(struct perf_output_handle *handle,
 			    struct perf_event *event,
 			    u64 enabled, u64 running)
@@ -4908,6 +4905,13 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 #define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\
 				 PERF_FORMAT_TOTAL_TIME_RUNNING)
 
+/*
+ * XXX PERF_SAMPLE_READ vs inherited events seems difficult.
+ *
+ * The problem is that its both hard and excessively expensive to iterate the
+ * child list, not to mention that its impossible to IPI the children running
+ * on another CPU, from interrupt/NMI context.
+ */
 static void perf_output_read(struct perf_output_handle *handle,
 			     struct perf_event *event)
 {
@@ -7194,9 +7198,10 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 	local64_set(&hwc->period_left, hwc->sample_period);
 
 	/*
-	 * we currently do not support PERF_FORMAT_GROUP on inherited events
+	 * We currently do not support PERF_SAMPLE_READ on inherited events.
+	 * See perf_output_read().
 	 */
-	if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))
+	if (attr->inherit && (attr->sample_type & PERF_SAMPLE_READ))
 		goto err_ns;
 
 	pmu = perf_init_event(event);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 079/102] MIPS: mm: fixed mappings: correct initialisation

[Sasha Levin]

From: Marcin Nowakowski <marcin.nowakowski@imgtec.com>

[ Upstream commit 71eb989ab5a110df8bcbb9609bacde73feacbedd ]

fixrange_init operates at PMD-granularity and expects the addresses to
be PMD-size aligned, but currently that might not be the case for
PKMAP_BASE unless it is defined properly, so ensure a correct alignment
is used before passing the address to fixrange_init.

fixed mappings: only align the start address that is passed to
fixrange_init rather than the value before adding the size, as we may
end up with uninitialised upper part of the range.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/mm/pgtable-32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index adc6911ba748..b19a3c506b1e 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -51,15 +51,15 @@ void __init pagetable_init(void)
 	/*
 	 * Fixed mappings:
 	 */
-	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
-	fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base);
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1);
+	fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base);
 
 #ifdef CONFIG_HIGHMEM
 	/*
 	 * Permanent kmaps:
 	 */
 	vaddr = PKMAP_BASE;
-	fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+	fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
 
 	pgd = swapper_pg_dir + __pgd_offset(vaddr);
 	pud = pud_offset(pgd, vaddr);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 080/102] MIPS: kprobes: flush_insn_slot should flush only if probe initialised

[Sasha Levin]

From: Marcin Nowakowski <marcin.nowakowski@imgtec.com>

[ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ]

When ftrace is used with kprobes, it is possible for a kprobe to contain
an invalid location (ie. only initialised to 0 and not to a specific
location in the code). Trying to perform a cache flush on such location
leads to a crash r4k_flush_icache_range().

Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.")
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16296/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/include/asm/kprobes.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h
index daba1f9a4f79..174aedce3167 100644
--- a/arch/mips/include/asm/kprobes.h
+++ b/arch/mips/include/asm/kprobes.h
@@ -40,7 +40,8 @@ typedef union mips_instruction kprobe_opcode_t;
 
 #define flush_insn_slot(p)						\
 do {									\
-	flush_icache_range((unsigned long)p->addr,			\
+	if (p->addr)							\
+		flush_icache_range((unsigned long)p->addr,		\
 			   (unsigned long)p->addr +			\
 			   (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));	\
 } while (0)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 081/102] net: emac: fix reset timeout with AR8035 phy

[Sasha Levin]

From: Christian Lamparter <chunkeey@googlemail.com>

[ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ]

This patch fixes a problem where the AR8035 PHY can't be
detected on an Cisco Meraki MR24, if the ethernet cable is
not connected on boot.

Russell Senior provided steps to reproduce the issue:
|Disconnect ethernet cable, apply power, wait until device has booted,
|plug in ethernet, check for interfaces, no eth0 is listed.
|
|This appears to be a problem during probing of the AR8035 Phy chip.
|When ethernet has no link, the phy detection fails, and eth0 is not
|created. Plugging ethernet later has no effect, because there is no
|interface as far as the kernel is concerned. The relevant part of
|the boot log looks like this:
|this is the failing case:
|
|[    0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[    0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[    0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
|and the succeeding case:
|
|[    0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[    0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:..
|[    0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01)

Based on the comment and the commit message of
commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT").
This is because the AR8035 PHY doesn't provide the TX Clock,
if the ethernet cable is not attached. This causes the reset
to timeout and the PHY detection code in emac_init_phy() is
unable to detect the AR8035 PHY. As a result, the emac driver
bails out early and the user left with no ethernet.

In order to stay compatible with existing configurations, the driver
tries the current reset approach at first. Only if the first attempt
timed out, it does perform one more retry with the clock temporarily
switched to the internal source for just the duration of the reset.

LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687>

Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 87bd953cc2ee..41ce1aafcc1c 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -349,6 +349,7 @@ static int emac_reset(struct emac_instance *dev)
 {
 	struct emac_regs __iomem *p = dev->emacp;
 	int n = 20;
+	bool __maybe_unused try_internal_clock = false;
 
 	DBG(dev, "reset" NL);
 
@@ -361,6 +362,7 @@ static int emac_reset(struct emac_instance *dev)
 	}
 
 #ifdef CONFIG_PPC_DCR_NATIVE
+do_retry:
 	/*
 	 * PPC460EX/GT Embedded Processor Advanced User's Manual
 	 * section 28.10.1 Mode Register 0 (EMACx_MR0) states:
@@ -368,10 +370,19 @@ static int emac_reset(struct emac_instance *dev)
 	 * of the EMAC. If none is present, select the internal clock
 	 * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
 	 * After a soft reset, select the external clock.
+	 *
+	 * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
+	 * ethernet cable is not attached. This causes the reset to timeout
+	 * and the PHY detection code in emac_init_phy() is unable to
+	 * communicate and detect the AR8035-A PHY. As a result, the emac
+	 * driver bails out early and the user has no ethernet.
+	 * In order to stay compatible with existing configurations, the
+	 * driver will temporarily switch to the internal clock, after
+	 * the first reset fails.
 	 */
 	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
-		if (dev->phy_address == 0xffffffff &&
-		    dev->phy_map == 0xffffffff) {
+		if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+					   dev->phy_map == 0xffffffff)) {
 			/* No PHY: select internal loop clock before reset */
 			dcri_clrset(SDR0, SDR0_ETH_CFG,
 				    0, SDR0_ETH_CFG_ECS << dev->cell_index);
@@ -389,8 +400,15 @@ static int emac_reset(struct emac_instance *dev)
 
 #ifdef CONFIG_PPC_DCR_NATIVE
 	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
-		if (dev->phy_address == 0xffffffff &&
-		    dev->phy_map == 0xffffffff) {
+		if (!n && !try_internal_clock) {
+			/* first attempt has timed out. */
+			n = 20;
+			try_internal_clock = true;
+			goto do_retry;
+		}
+
+		if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+					   dev->phy_map == 0xffffffff)) {
 			/* No PHY: restore external clock source after reset */
 			dcri_clrset(SDR0, SDR0_ETH_CFG,
 				    SDR0_ETH_CFG_ECS << dev->cell_index, 0);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 082/102] perf tests: Decompress kernel module before objdump

[Sasha Levin]

From: Namhyung Kim <namhyung@kernel.org>

[ Upstream commit 94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 ]

If a kernel modules is compressed, it should be decompressed before
running objdump to parse binary data correctly.  This fixes a failure of
object code reading test for me.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/tests/code-reading.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c
index 67f2d6323558..28dfd1f7f776 100644
--- a/tools/perf/tests/code-reading.c
+++ b/tools/perf/tests/code-reading.c
@@ -141,6 +141,8 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode,
 	unsigned char buf2[BUFSZ];
 	size_t ret_len;
 	u64 objdump_addr;
+	const char *objdump_name;
+	char decomp_name[KMOD_DECOMP_LEN];
 	int ret;
 
 	pr_debug("Reading object code for memory address: %#"PRIx64"\n", addr);
@@ -202,9 +204,25 @@ static int read_object_code(u64 addr, size_t len, u8 cpumode,
 		state->done[state->done_cnt++] = al.map->start;
 	}
 
+	objdump_name = al.map->dso->long_name;
+	if (dso__needs_decompress(al.map->dso)) {
+		if (dso__decompress_kmodule_path(al.map->dso, objdump_name,
+						 decomp_name,
+						 sizeof(decomp_name)) < 0) {
+			pr_debug("decompression failed\n");
+			return -1;
+		}
+
+		objdump_name = decomp_name;
+	}
+
 	/* Read the object code using objdump */
 	objdump_addr = map__rip_2objdump(al.map, al.addr);
-	ret = read_via_objdump(al.map->dso->long_name, objdump_addr, buf2, len);
+	ret = read_via_objdump(objdump_name, objdump_addr, buf2, len);
+
+	if (dso__needs_decompress(al.map->dso))
+		unlink(objdump_name);
+
 	if (ret > 0) {
 		/*
 		 * The kernel maps are inaccurate - assume objdump is right in
-- 
2.14.1

[PATCH AUTOSEL for 3.18 083/102] xen: avoid type warning in xchg_xen_ulong

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9cc91f212111cdcbefa02dcdb7dd443f224bf52c ]

The improved type-checking version of container_of() triggers a warning for
xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t
contains a signed value:

drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events':
drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of()

This adds a cast to work around the warning.

Cc: Ian Abbott <abbotti@mev.co.uk>
Fixes: 85323a991d40 ("xen: arm: mandate EABI and use generic atomic operations.")
Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/include/asm/xen/events.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h
index 8b1f37bfeeec..b7aadab9b0e8 100644
--- a/arch/arm/include/asm/xen/events.h
+++ b/arch/arm/include/asm/xen/events.h
@@ -16,7 +16,7 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return raw_irqs_disabled_flags(regs->ARM_cpsr);
 }
 
-#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr),	\
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((long long*)(ptr),\
 							    atomic64_t,	\
 							    counter), (val))
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 084/102] bnx2x: Allow vfs to disable txvlan offload

[Sasha Levin]

From: "Mintz, Yuval" <Yuval.Mintz@cavium.com>

[ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ]

VF clients are configured as enforced, meaning firmware is validating
the correctness of their ethertype/vid during transmission.
Once txvlan is disabled, VF would start getting SKBs for transmission
here vlan is on the payload - but it'll pass the packet's ethertype
instead of the vid, leading to firmware declaring it as malicious.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index d2ebc9d5e183..ed29efe69787 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3875,15 +3875,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* when transmitting in a vf, start bd must hold the ethertype
 		 * for fw to enforce it
 		 */
+		u16 vlan_tci = 0;
 #ifndef BNX2X_STOP_ON_ERROR
-		if (IS_VF(bp))
+		if (IS_VF(bp)) {
 #endif
-			tx_start_bd->vlan_or_ethertype =
-				cpu_to_le16(ntohs(eth->h_proto));
+			/* Still need to consider inband vlan for enforced */
+			if (__vlan_get_tag(skb, &vlan_tci)) {
+				tx_start_bd->vlan_or_ethertype =
+					cpu_to_le16(ntohs(eth->h_proto));
+			} else {
+				tx_start_bd->bd_flags.as_bitfield |=
+					(X_ETH_INBAND_VLAN <<
+					 ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+				tx_start_bd->vlan_or_ethertype =
+					cpu_to_le16(vlan_tci);
+			}
 #ifndef BNX2X_STOP_ON_ERROR
-		else
+		} else {
 			/* used by FW for packet accounting */
 			tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
+		}
 #endif
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 085/102] sctp: fix recursive locking warning in sctp_do_peeloff

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 6dfe4b97e08ec3d1a593fdaca099f0ef0a3a19e6 ]

Dmitry got the following recursive locking report while running syzkaller
fuzzer, the Call Trace:
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline]
 check_deadlock kernel/locking/lockdep.c:1773 [inline]
 validate_chain kernel/locking/lockdep.c:2251 [inline]
 __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340
 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536
 lock_sock include/net/sock.h:1460 [inline]
 sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432
 sock_release+0x8d/0x1e0 net/socket.c:597
 __sock_create+0x38b/0x870 net/socket.c:1226
 sock_create+0x7f/0xa0 net/socket.c:1237
 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879
 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline]
 sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628
 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690
 SYSC_getsockopt net/socket.c:1817 [inline]
 SyS_getsockopt+0x240/0x380 net/socket.c:1799
 entry_SYSCALL_64_fastpath+0x1f/0xc2

This warning is caused by the lock held by sctp_getsockopt() is on one
socket, while the other lock that sctp_close() is getting later is on
the newly created (which failed) socket during peeloff operation.

This patch is to avoid this warning by use lock_sock with subclass
SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/sctp/socket.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 225019397bc6..f389cd2425df 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1513,7 +1513,7 @@ static void sctp_close(struct sock *sk, long timeout)
 
 	pr_debug("%s: sk:%p, timeout:%ld\n", __func__, sk, timeout);
 
-	lock_sock(sk);
+	lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
 	sk->sk_shutdown = SHUTDOWN_MASK;
 	sk->sk_state = SCTP_SS_CLOSING;
 
@@ -1564,7 +1564,7 @@ static void sctp_close(struct sock *sk, long timeout)
 	 * held and that should be grabbed before socket lock.
 	 */
 	spin_lock_bh(&net->sctp.addr_wq_lock);
-	bh_lock_sock(sk);
+	bh_lock_sock_nested(sk);
 
 	/* Hold the sock, since sk_common_release() will put sock_put()
 	 * and we have just a little more cleanup.
-- 
2.14.1

[PATCH AUTOSEL for 3.18 086/102] sparc64: ldc abort during vds iso boot

[Sasha Levin]

From: Jag Raman <jag.raman@oracle.com>

[ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ]

Orabug: 20902628

When an ldc control-only packet is received during data exchange in
read_nonraw(), a new rx head is calculated but the rx queue head is not
actually advanced (rx_set_head() is not called) and a branch is taken to
'no_data' at which point two things can happen depending on the value
of the newly calculated rx head and the current rx tail:

- If the rx queue is determined to be not empty, then the wrong packet
  is picked up.

- If the rx queue is determined to be empty, then a read error (EAGAIN)
  is eventually returned since it is falsely assumed that more data was
  expected.

The fix is to update the rx head and return in case of a control only
packet during data exchange.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Aaron Young <aaron.young@oracle.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/sparc/kernel/ldc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 71762565513e..8bca543977fe 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1693,9 +1693,14 @@ static int read_nonraw(struct ldc_channel *lp, void *buf, unsigned int size)
 
 		lp->rcv_nxt = p->seqid;
 
+		/*
+		 * If this is a control-only packet, there is nothing
+		 * else to do but advance the rx queue since the packet
+		 * was already processed above.
+		 */
 		if (!(p->type & LDC_DATA)) {
 			new = rx_advance(lp, new);
-			goto no_data;
+			break;
 		}
 		if (p->stype & (LDC_ACK | LDC_NACK)) {
 			err = data_ack_nack(lp, p);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 087/102] iio: magnetometer: st_magn_spi: fix spi_device_id table

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

[ Upstream commit c83761ff0aac954aa368c623bb0f0d1a3214e834 ]

Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series
does not support spi interface

Fixes: 872e79add756 (iio: magn: Add STMicroelectronics magn driver)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/magnetometer/st_magn_spi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index a6143ea51dfc..d28685bec34e 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -49,8 +49,6 @@ static int st_magn_spi_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id st_magn_id_table[] = {
-	{ LSM303DLHC_MAGN_DEV_NAME },
-	{ LSM303DLM_MAGN_DEV_NAME },
 	{ LIS3MDL_MAGN_DEV_NAME },
 	{},
 };
-- 
2.14.1

[PATCH AUTOSEL for 3.18 088/102] Bluetooth: Send HCI Set Event Mask Page 2 command only when needed

[Sasha Levin]

From: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ]

The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices
report support for the Set Event Mask Page 2 command, but actually do
return an error when trying to use it.

  < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
  > HCI Event: Command Complete (0x0e) plen 68
       Read Local Supported Commands (0x04|0x0002) ncmd 1
         Status: Success (0x00)
         Commands: 162 entries
           ...
           Set Event Mask Page 2 (Octet 22 - Bit 2)
           ...

  < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8
         Mask: 0x0000000000000000
  > HCI Event: Command Complete (0x0e) plen 4
       Set Event Mask Page 2 (0x03|0x0063) ncmd 1
         Status: Unknown HCI Command (0x01)

Since these controllers do not support any feature that would require
the event mask page 2 to be modified, it is safe to not send this
command at all. The default value is all bits set to zero.

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a5c ProdID=21e6 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=F82FA8E8CFC0
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/bluetooth/hci_core.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cb05d7f16a34..7aba8783c13d 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1635,6 +1635,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 {
 	struct hci_dev *hdev = req->hdev;
 	u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	bool changed = false;
 
 	/* If Connectionless Slave Broadcast master role is supported
 	 * enable all necessary events for it.
@@ -1644,6 +1645,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 		events[1] |= 0x80;	/* Synchronization Train Complete */
 		events[2] |= 0x10;	/* Slave Page Response Timeout */
 		events[2] |= 0x20;	/* CSB Channel Map Change */
+		changed = true;
 	}
 
 	/* If Connectionless Slave Broadcast slave role is supported
@@ -1654,13 +1656,24 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
 		events[2] |= 0x02;	/* CSB Receive */
 		events[2] |= 0x04;	/* CSB Timeout */
 		events[2] |= 0x08;	/* Truncated Page Complete */
+		changed = true;
 	}
 
 	/* Enable Authenticated Payload Timeout Expired event if supported */
-	if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING)
+	if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) {
 		events[2] |= 0x80;
+		changed = true;
+	}
 
-	hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events);
+	/* Some Broadcom based controllers indicate support for Set Event
+	 * Mask Page 2 command, but then actually do not support it. Since
+	 * the default value is all bits set to zero, the command is only
+	 * required if the event mask has to be changed. In case no change
+	 * to the event mask is needed, skip this command.
+	 */
+	if (changed)
+		hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2,
+			    sizeof(events), events);
 }
 
 static void hci_init3_req(struct hci_request *req, unsigned long opt)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 089/102] ACPICA: Events: Add runtime stub support for event APIs

[Sasha Levin]

From: Lv Zheng <lv.zheng@intel.com>

[ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ]

ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce

It is reported that on Linux, RTC driver complains wrong errors on
hardware reduced platform:
  [    4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654)

This patch fixes this by correctly adding runtime reduced hardware check.
Reported by Chandan Tagore, fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/99bc3bec
Tested-by: Chandan Tagore <tagore.chandan@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/acpica/evxfevnt.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index bb8cbf5961bf..d375968c8072 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -180,6 +180,12 @@ acpi_status acpi_enable_event(u32 event, u32 flags)
 
 	ACPI_FUNCTION_TRACE(acpi_enable_event);
 
+	/* If Hardware Reduced flag is set, there are no fixed events */
+
+	if (acpi_gbl_reduced_hardware) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/* Decode the Fixed Event */
 
 	if (event > ACPI_EVENT_MAX) {
@@ -237,6 +243,12 @@ acpi_status acpi_disable_event(u32 event, u32 flags)
 
 	ACPI_FUNCTION_TRACE(acpi_disable_event);
 
+	/* If Hardware Reduced flag is set, there are no fixed events */
+
+	if (acpi_gbl_reduced_hardware) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/* Decode the Fixed Event */
 
 	if (event > ACPI_EVENT_MAX) {
@@ -290,6 +302,12 @@ acpi_status acpi_clear_event(u32 event)
 
 	ACPI_FUNCTION_TRACE(acpi_clear_event);
 
+	/* If Hardware Reduced flag is set, there are no fixed events */
+
+	if (acpi_gbl_reduced_hardware) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
 	/* Decode the Fixed Event */
 
 	if (event > ACPI_EVENT_MAX) {
-- 
2.14.1

[PATCH AUTOSEL for 3.18 090/102] ACPICA: Disassembler: Abort on an invalid/unknown AML opcode

[Sasha Levin]

From: Bob Moore <robert.moore@intel.com>

[ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ]

ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb

An invalid opcode indicates something seriously wrong with the
input AML file. The AML parser is immediately confused and lost,
causing the resulting parse tree to be ill-formed. The actual
disassembly can then cause numerous unrelated errors and faults.

This change aborts the disassembly upon discovery of such an
opcode during the AML parse phase.

Link: https://github.com/acpica/acpica/commit/ed0389cb
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/acpi/acpica/psobject.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/acpi/acpica/psobject.c b/drivers/acpi/acpica/psobject.c
index a6885077d59e..e49a7fa4789e 100644
--- a/drivers/acpi/acpica/psobject.c
+++ b/drivers/acpi/acpica/psobject.c
@@ -118,6 +118,9 @@ static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
 			     (u32)(walk_state->aml_offset +
 				   sizeof(struct acpi_table_header)));
 
+			ACPI_ERROR((AE_INFO,
+				    "Aborting disassembly, AML byte code is corrupt"));
+
 			/* Dump the context surrounding the invalid opcode */
 
 			acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
@@ -126,6 +129,14 @@ static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
 					     sizeof(struct acpi_table_header) -
 					     16));
 			acpi_os_printf(" */\n");
+
+			/*
+			 * Just abort the disassembly, cannot continue because the
+			 * parser is essentially lost. The disassembler can then
+			 * randomly fail because an ill-constructed parse tree
+			 * can result.
+			 */
+			return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 #endif
 		}
 
@@ -290,6 +301,9 @@ acpi_ps_create_op(struct acpi_walk_state *walk_state,
 	if (status == AE_CTRL_PARSE_CONTINUE) {
 		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 	}
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	/* Create Op structure and append to parent's argument list */
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 091/102] vxlan: dont migrate permanent fdb entries during learn

[Sasha Levin]

From: Roopa Prabhu <roopa@cumulusnetworks.com>

[ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ]

This patch fixes vxlan_snoop to not move permanent fdb entries
on learn events. This is consistent with the bridge fdb
handling of permanent entries.

Fixes: 26a41ae60438 ("vxlan: only migrate dynamic FDB entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/vxlan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 2dc89582575a..3db77c274098 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -985,7 +985,7 @@ static bool vxlan_snoop(struct net_device *dev,
 			return false;
 
 		/* Don't migrate static entries, drop packets */
-		if (f->state & NUD_NOARP)
+		if (f->state & (NUD_PERMANENT | NUD_NOARP))
 			return true;
 
 		if (net_ratelimit())
-- 
2.14.1

[PATCH AUTOSEL for 3.18 092/102] xfs: fix up agi unlinked list reservations

[Sasha Levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit e8341d9f6348640dff01d8c4a33695dc82bab5a3 ]

The current AGI unlinked list addition and removal reservations do
not reflect the worst case log usage. An unlinked list removal can
log up to two on-disk inode clusters but only includes reservation
for one. An unlinked list addition logs the on-disk cluster but
includes reservation for an in-core inode.

Update the AGI unlinked list reservation helpers to calculate the
correct worst case reservation for the associated operations.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/xfs/libxfs/xfs_trans_resv.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_trans_resv.c b/fs/xfs/libxfs/xfs_trans_resv.c
index f2bda7c76b8a..96bbbfd021fe 100644
--- a/fs/xfs/libxfs/xfs_trans_resv.c
+++ b/fs/xfs/libxfs/xfs_trans_resv.c
@@ -257,13 +257,14 @@ xfs_calc_rename_reservation(
  * For removing an inode from unlinked list at first, we can modify:
  *    the agi hash list and counters: sector size
  *    the on disk inode before ours in the agi hash list: inode cluster size
+ *    the on disk inode in the agi hash list: inode cluster size
  */
 STATIC uint
 xfs_calc_iunlink_remove_reservation(
 	struct xfs_mount        *mp)
 {
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-	       max_t(uint, XFS_FSB_TO_B(mp, 1), mp->m_inode_cluster_size);
+	       2 * max_t(uint, XFS_FSB_TO_B(mp, 1), mp->m_inode_cluster_size);
 }
 
 /*
@@ -295,13 +296,13 @@ xfs_calc_link_reservation(
 /*
  * For adding an inode to unlinked list we can modify:
  *    the agi hash list: sector size
- *    the unlinked inode: inode size
+ *    the on disk inode: inode cluster size
  */
 STATIC uint
 xfs_calc_iunlink_add_reservation(xfs_mount_t *mp)
 {
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_inode_res(mp, 1);
+		max_t(uint, XFS_FSB_TO_B(mp, 1), mp->m_inode_cluster_size);
 }
 
 /*
-- 
2.14.1

[PATCH AUTOSEL for 3.18 093/102] bcache: stop writeback thread after detaching

[Sasha Levin]

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ]

Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo  ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.

Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.

[edit by mlyle: commit log spelling/formatting]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/super.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 9c56cf714b22..cb98bad58412 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -921,6 +921,12 @@ static void cached_dev_detach_finish(struct work_struct *w)
 
 	mutex_lock(&bch_register_lock);
 
+	cancel_delayed_work_sync(&dc->writeback_rate_update);
+	if (!IS_ERR_OR_NULL(dc->writeback_thread)) {
+		kthread_stop(dc->writeback_thread);
+		dc->writeback_thread = NULL;
+	}
+
 	memset(&dc->sb.set_uuid, 0, 16);
 	SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE);
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 094/102] bcache: segregate flash only volume write streams

[Sasha Levin]

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ]

In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |

So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.

In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.

Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.

[mlyle: fixed commit log formatting, permissions, line endings]

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/bcache/alloc.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c
index ea47980949ef..f8c5bc719783 100644
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -514,15 +514,21 @@ struct open_bucket {
 
 /*
  * We keep multiple buckets open for writes, and try to segregate different
- * write streams for better cache utilization: first we look for a bucket where
- * the last write to it was sequential with the current write, and failing that
- * we look for a bucket that was last used by the same task.
+ * write streams for better cache utilization: first we try to segregate flash
+ * only volume write streams from cached devices, secondly we look for a bucket
+ * where the last write to it was sequential with the current write, and
+ * failing that we look for a bucket that was last used by the same task.
  *
  * The ideas is if you've got multiple tasks pulling data into the cache at the
  * same time, you'll get better cache utilization if you try to segregate their
  * data and preserve locality.
  *
- * For example, say you've starting Firefox at the same time you're copying a
+ * For example, dirty sectors of flash only volume is not reclaimable, if their
+ * dirty sectors mixed with dirty sectors of cached device, such buckets will
+ * be marked as dirty and won't be reclaimed, though the dirty data of cached
+ * device have been written back to backend device.
+ *
+ * And say you've starting Firefox at the same time you're copying a
  * bunch of files. Firefox will likely end up being fairly hot and stay in the
  * cache awhile, but the data you copied might not be; if you wrote all that
  * data to the same buckets it'd get invalidated at the same time.
@@ -539,7 +545,10 @@ static struct open_bucket *pick_data_bucket(struct cache_set *c,
 	struct open_bucket *ret, *ret_task = NULL;
 
 	list_for_each_entry_reverse(ret, &c->data_buckets, list)
-		if (!bkey_cmp(&ret->key, search))
+		if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) !=
+		    UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)]))
+			continue;
+		else if (!bkey_cmp(&ret->key, search))
 			goto found;
 		else if (ret->last_write_point == write_point)
 			ret_task = ret;
-- 
2.14.1

[PATCH AUTOSEL for 3.18 095/102] scsi: libsas: fix memory leak in sas_smp_get_phy_events()

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ]

We've got a memory leak with the following producer:

while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done

The buffer req is allocated and not freed after we return. Fix it.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/libsas/sas_expander.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 0cac7d8fd0f7..98783fecd0b7 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -684,6 +684,7 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
 	phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
 
  out:
+	kfree(req);
 	kfree(resp);
 	return res;
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 096/102] scsi: libsas: fix error when getting phy events

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ]

The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:

~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0

Obviously we should goto error handler if smp_execute_task() returns
non-zero.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/libsas/sas_expander.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 98783fecd0b7..9ee5a359248c 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -675,7 +675,7 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
 	res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
 			            resp, RPEL_RESP_SIZE);
 
-	if (!res)
+	if (res)
 		goto out;
 
 	phy->invalid_dword_count = scsi_to_u32(&resp[12]);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 097/102] scsi: libsas: initialize sas_phy status according to response of DISCOVER

[Sasha Levin]

From: chenxiang <chenxiang66@hisilicon.com>

[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ]

The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.

In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.

Signed-off-by: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/libsas/sas_expander.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 9ee5a359248c..e2630aea4e9f 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -282,6 +282,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 	phy->phy->minimum_linkrate = dr->pmin_linkrate;
 	phy->phy->maximum_linkrate = dr->pmax_linkrate;
 	phy->phy->negotiated_linkrate = phy->linkrate;
+	phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
 
  skip:
 	if (new_phy)
-- 
2.14.1

[PATCH AUTOSEL for 3.18 098/102] tty: n_gsm: Allow ADM response in addition to UA for control dlci

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ]

Some devices have the control dlci stay in ADM mode instead of the UA
mode. This can seen at least on droid 4 when trying to open the ts
27.010 mux port. Enabling n_gsm debug mode shows the control dlci
always respond with DM to SABM instead of UA:

# modprobe n_gsm debug=0xff
# ldattach -d GSM0710 /dev/ttyS0 &
gsmld_output: 00000000: f9 03 3f 01 1c f9
--> 0) C: SABM(P)
gsmld_receive: 00000000: f9 03 1f 01 36 f9
<-- 0) C: DM(P)
...
$ minicom -D /dev/gsmtty1
minicom: cannot open /dev/gsmtty1: No error information
$ strace minicom -D /dev/gsmtty1
...
open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT

Note that this is different issue from other n_gsm -EL2HLT issues such
as timeouts when the control dlci does not respond at all.

The ADM mode seems to be a quite common according to "RF Wireless World"
article "GSM Issue-UE sends SABM and gets a DM response instead of
UA response":

  This issue is most commonly observed in GSM networks where in UE sends
  SABM and expects network to send UA response but it ends up receiving
  DM response from the network. SABM stands for Set asynchronous balanced
  mode, UA stands for Unnumbered Acknowledge and DA stands for
  Disconnected Mode.

  An RLP entity can be in one of two modes:
  - Asynchronous Balanced Mode (ABM)
  - Asynchronous Disconnected Mode (ADM)

Currently Linux kernel closes the control dlci after several retries
in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce
error code -EL2HLT when trying to open them as the closing of control
dlci has already set gsm->dead.

Let's fix the issue by allowing control dlci stay in ADM mode after the
retries so the /dev/gsmtty ports can be opened and used. It seems that
it might take several attempts to get any response from the control
dlci, so it's best to allow ADM mode only after the SABM retries are
done.

Note that for droid 4 additional patches are needed to mux the ttyS0
pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also
needed to use n_gsm. And the mdm6600 modem needs to be powered on.

Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/n_gsm.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index db37ee49c3bf..450a8ca16351 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1467,6 +1467,10 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
  *	in which case an opening port goes back to closed and a closing port
  *	is simply put into closed state (any further frames from the other
  *	end will get a DM response)
+ *
+ *	Some control dlci can stay in ADM mode with other dlci working just
+ *	fine. In that case we can just keep the control dlci open after the
+ *	DLCI_OPENING retries time out.
  */
 
 static void gsm_dlci_t1(unsigned long data)
@@ -1480,8 +1484,15 @@ static void gsm_dlci_t1(unsigned long data)
 		if (dlci->retries) {
 			gsm_command(dlci->gsm, dlci->addr, SABM|PF);
 			mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
-		} else
+		} else if (!dlci->addr && gsm->control == (DM | PF)) {
+			if (debug & 8)
+				pr_info("DLCI %d opening in ADM mode.\n",
+					dlci->addr);
+			gsm_dlci_open(dlci);
+		} else {
 			gsm_dlci_close(dlci);
+		}
+
 		break;
 	case DLCI_CLOSING:
 		dlci->retries--;
@@ -1499,8 +1510,8 @@ static void gsm_dlci_t1(unsigned long data)
  *	@dlci: DLCI to open
  *
  *	Commence opening a DLCI from the Linux side. We issue SABM messages
- *	to the modem which should then reply with a UA, at which point we
- *	will move into open state. Opening is done asynchronously with retry
+ *	to the modem which should then reply with a UA or ADM, at which point
+ *	we will move into open state. Opening is done asynchronously with retry
  *	running off timers and the responses.
  */
 
-- 
2.14.1

[PATCH AUTOSEL for 3.18 099/102] EDAC, mv64x60: Fix an error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ]

We should not call edac_mc_del_mc() if a corresponding call to
edac_mc_add_mc() has not been performed yet.

So here, we should go to err instead of err2 to branch at the right
place of the error handling path.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/edac/mv64x60_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index 542fad70e360..f0e5a6aa2371 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -763,7 +763,7 @@ static int mv64x60_mc_err_probe(struct platform_device *pdev)
 		/* Non-ECC RAM? */
 		printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__);
 		res = -ENODEV;
-		goto err2;
+		goto err;
 	}
 
 	edac_dbg(3, "init mci\n");
-- 
2.14.1

[PATCH AUTOSEL for 3.18 100/102] signal/metag: Document a conflict with SI_USER with SIGFPE

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit b80328be53c215346b153769267b38f531d89b4f ]

Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER.  Posix and common sense requires
that SI_USER not be a signal specific si_code.  As such this use of 0
for the si_code is a pretty horribly broken ABI.

Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
hat uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design.  Making this a very
flakey implementation.

Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the
appropriate fields will reliably be copied.

Possible ABI fixes includee:
  - Send the signal without siginfo
  - Don't generate a signal
  - Possibly assign and use an appropriate si_code
  - Don't handle cases which can't happen

Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Ref: ac919f0883e5 ("metag: Traps")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/metag/include/uapi/asm/siginfo.h | 7 +++++++
 arch/metag/kernel/traps.c             | 2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/metag/include/uapi/asm/siginfo.h b/arch/metag/include/uapi/asm/siginfo.h
index b2e0c8b62aef..baac51cf30d9 100644
--- a/arch/metag/include/uapi/asm/siginfo.h
+++ b/arch/metag/include/uapi/asm/siginfo.h
@@ -5,4 +5,11 @@
 
 #include <asm-generic/siginfo.h>
 
+/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME      0       /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
 #endif
diff --git a/arch/metag/kernel/traps.c b/arch/metag/kernel/traps.c
index 17b2e2e38d5a..6c4413c6a195 100644
--- a/arch/metag/kernel/traps.c
+++ b/arch/metag/kernel/traps.c
@@ -732,7 +732,7 @@ TBIRES fpe_handler(TBIRES State, int SigNum, int Triggers, int Inst, PTBI pTBI)
 	else if (error_state & TXSTAT_FPE_INEXACT_BIT)
 		info.si_code = FPE_FLTRES;
 	else
-		info.si_code = 0;
+		info.si_code = FPE_FIXME;
 	info.si_errno = 0;
 	info.si_addr = (__force void __user *)regs->ctx.CurrPC;
 	force_sig_info(SIGFPE, &info, current);
-- 
2.14.1

[PATCH AUTOSEL for 3.18 101/102] signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ]

Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER.  Posix and common sense requires
that SI_USER not be a signal specific si_code.  As such this use of 0
for the si_code is a pretty horribly broken ABI.

Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design.  Making this a very
flakey implementation.

Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return
SIL_FAULT and the appropriate fields will be reliably copied.

Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc:  linuxppc-dev@lists.ozlabs.org
Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++
 arch/powerpc/kernel/traps.c             | 10 +++++-----
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/include/uapi/asm/siginfo.h b/arch/powerpc/include/uapi/asm/siginfo.h
index ccce3ef5cd86..9c437eaf7c21 100644
--- a/arch/powerpc/include/uapi/asm/siginfo.h
+++ b/arch/powerpc/include/uapi/asm/siginfo.h
@@ -17,4 +17,19 @@
 #undef NSIGTRAP
 #define NSIGTRAP	4
 
+/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME	0	/* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
+/*
+ * SIGTRAP si_codes
+ */
+#ifdef __KERNEL__
+#define TRAP_FIXME	0	/* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
+
 #endif	/* _ASM_POWERPC_SIGINFO_H */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 0dc43f9932cf..6cc0280a8ae0 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -769,7 +769,7 @@ void unknown_exception(struct pt_regs *regs)
 	printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
 	       regs->nip, regs->msr, regs->trap);
 
-	_exception(SIGTRAP, regs, 0, 0);
+	_exception(SIGTRAP, regs, TRAP_FIXME, 0);
 
 	exception_exit(prev_state);
 }
@@ -791,7 +791,7 @@ void instruction_breakpoint_exception(struct pt_regs *regs)
 
 void RunModeException(struct pt_regs *regs)
 {
-	_exception(SIGTRAP, regs, 0, 0);
+	_exception(SIGTRAP, regs, TRAP_FIXME, 0);
 }
 
 void __kprobes single_step_exception(struct pt_regs *regs)
@@ -826,7 +826,7 @@ static void emulate_single_step(struct pt_regs *regs)
 
 static inline int __parse_fpscr(unsigned long fpscr)
 {
-	int ret = 0;
+	int ret = FPE_FIXME;
 
 	/* Invalid operation */
 	if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX))
@@ -1742,7 +1742,7 @@ void SPEFloatingPointException(struct pt_regs *regs)
 	extern int do_spe_mathemu(struct pt_regs *regs);
 	unsigned long spefscr;
 	int fpexc_mode;
-	int code = 0;
+	int code = FPE_FIXME;
 	int err;
 
 	flush_spe_to_thread(current);
@@ -1811,7 +1811,7 @@ void SPEFloatingPointRoundException(struct pt_regs *regs)
 		printk(KERN_ERR "unrecognized spe instruction "
 		       "in %s at %lx\n", current->comm, regs->nip);
 	} else {
-		_exception(SIGFPE, regs, 0, regs->nip);
+		_exception(SIGFPE, regs, FPE_FIXME, regs->nip);
 		return;
 	}
 }
-- 
2.14.1

[PATCH AUTOSEL for 3.18 102/102] signal/arm: Document conflicts with SI_USER and SIGFPE

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 7771c66457004977b616bab785209f49d164f527 ]

Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER.  Posix and common sense requires
that SI_USER not be a signal specific si_code.  As such this use of 0
for the si_code is a pretty horribly broken ABI.

Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design.  Making this a very
flakey implementation.

Utilizing FPE_FIXME, siginfo_layout will now return SIL_FAULT and the
appropriate fields will be reliably copied.

Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen

Cc: Russell King <rmk@flint.arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Ref: 451436b7bbb2 ("[ARM] Add support code for ARM hardware vector floating point")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/include/uapi/asm/siginfo.h | 13 +++++++++++++
 arch/arm/vfp/vfpmodule.c            |  2 +-
 2 files changed, 14 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/uapi/asm/siginfo.h

diff --git a/arch/arm/include/uapi/asm/siginfo.h b/arch/arm/include/uapi/asm/siginfo.h
new file mode 100644
index 000000000000..d0513880be21
--- /dev/null
+++ b/arch/arm/include/uapi/asm/siginfo.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SIGINFO_H
+#define __ASM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME	0	/* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 2f37e1d6cb45..b646400bfb0e 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -261,7 +261,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 
 	if (exceptions == VFP_EXCEPTION_ERROR) {
 		vfp_panic("unhandled bounce", inst);
-		vfp_raise_sigfpe(0, regs);
+		vfp_raise_sigfpe(FPE_FIXME, regs);
 		return;
 	}
 
-- 
2.14.1