From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:40024 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934145AbeDKTEq (ORCPT ); Wed, 11 Apr 2018 15:04:46 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Andy Shevchenko , Adrian Hunter , Ulf Hansson , Sasha Levin Subject: [PATCH 4.9 266/310] sdhci: Advertise 2.0v supply on SDIO host controller Date: Wed, 11 Apr 2018 20:36:45 +0200 Message-Id: <20180411183634.103205303@linuxfoundation.org> In-Reply-To: <20180411183622.305902791@linuxfoundation.org> References: <20180411183622.305902791@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andy Shevchenko [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -492,6 +492,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1404,6 +1404,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: