From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Amir Goldstein <amir73il@gmail.com>,
Vivek Goyal <vgoyal@redhat.com>,
Miklos Szeredi <mszeredi@redhat.com>
Subject: [PATCH 4.14 46/49] ovl: fix lookup with middle layer opaque dir and absolute path redirects
Date: Tue, 17 Apr 2018 17:59:25 +0200 [thread overview]
Message-ID: <20180417155717.228185033@linuxfoundation.org> (raw)
In-Reply-To: <20180417155715.032245882@linuxfoundation.org>
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <amir73il@gmail.com>
commit 3ec9b3fafcaf441cc4d46b9742cd6ec0c79f8df0 upstream.
As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.
Here is an example to demonstrate the issue. Say you have following setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.
Following is a reproducer.
Watch me make foo disappear:
$ mkdir lower middle upper work work2 merged
$ mkdir lower/origin
$ touch lower/origin/foo
$ mount -t overlay none merged/ \
-olowerdir=lower,upperdir=middle,workdir=work2
$ mkdir merged/pure
$ mv merged/origin merged/pure/redirect
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
$ mv merged/pure/redirect merged/redirect
Now you see foo inside a twice redirected merged dir:
$ ls merged/redirect
foo
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
After mount cycle you don't see foo inside the same dir:
$ ls merged/redirect
During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.
Fixes: 02b69b284cd7 ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/overlayfs/namei.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/overlayfs/namei.c
+++ b/fs/overlayfs/namei.c
@@ -56,6 +56,15 @@ static int ovl_check_redirect(struct den
if (s == next)
goto invalid;
}
+ /*
+ * One of the ancestor path elements in an absolute path
+ * lookup in ovl_lookup_layer() could have been opaque and
+ * that will stop further lookup in lower layers (d->stop=true)
+ * But we have found an absolute redirect in decendant path
+ * element and that should force continue lookup in lower
+ * layers (reset d->stop).
+ */
+ d->stop = false;
} else {
if (strchr(buf, '/') != NULL)
goto invalid;
next prev parent reply other threads:[~2018-04-17 16:07 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-17 15:58 [PATCH 4.14 00/49] 4.14.35-stable review Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 01/49] netfilter: ipset: Missing nfnl_lock()/nfnl_unlock() is added to ip_set_net_exit() Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 02/49] cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 03/49] rds: MP-RDS may use an invalid c_path Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 04/49] slip: Check if rstate is initialized before uncompressing Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 05/49] vhost: fix vhost_vq_access_ok() log check Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 06/49] vhost: Fix vhost_copy_to_user() Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 07/49] lan78xx: Correctly indicate invalid OTP Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 08/49] media: v4l2-compat-ioctl32: dont oops on overlay Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 09/49] media: v4l: vsp1: Fix header display list status check in continuous mode Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 10/49] parisc: Fix out of array access in match_pci_device() Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 11/49] parisc: Fix HPMC handler by increasing size to multiple of 16 bytes Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 12/49] Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 13/49] PCI: hv: Serialize the present and eject work items Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 14/49] KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 15/49] perf intel-pt: Fix overlap detection to identify consecutive buffers correctly Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 16/49] perf intel-pt: Fix sync_switch Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 17/49] perf intel-pt: Fix error recovery from missing TIP packet Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 18/49] perf intel-pt: Fix timestamp following overflow Greg Kroah-Hartman
2018-04-17 15:58 ` [PATCH 4.14 19/49] perf/core: Fix use-after-free in uprobe_perf_close() Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 21/49] x86/MCE/AMD: Define a function to get SMCA bank type Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 22/49] scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 23/49] apparmor: fix logging of the existence test for signals Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 24/49] apparmor: fix display of .ns_name for containers Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 25/49] apparmor: fix resource audit messages when auditing peer Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 26/49] block/loop: fix deadlock after loop_set_status Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 27/49] nfit: fix region registration vs block-data-window ranges Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 28/49] s390/qdio: dont retry EQBS after CCQ 96 Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 29/49] s390/qdio: dont merge ERROR output buffers Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 30/49] s390/ipl: ensure loadparm valid flag is set Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 31/49] get_user_pages_fast(): return -EFAULT on access_ok failure Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 32/49] getname_kernel() needs to make sure that ->name != ->iname in long case Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 33/49] Bluetooth: Fix connection if directed advertising and privacy is used Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 34/49] Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 35/49] rtl8187: Fix NULL pointer dereference in priv->conf_mutex Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 36/49] x86/MCE: Report only DRAM ECC as memory errors on AMD systems Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 37/49] x86/mce/AMD: Pass the bank number to smca_get_bank_type() Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 38/49] x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 39/49] x86/mce/AMD: Get address from already initialized block Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 40/49] hwmon: (ina2xx) Fix access to uninitialized mutex Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 42/49] sunrpc: remove incorrect HMAC request initialization Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 43/49] f2fs: fix heap mode to reset it back Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 44/49] lib: fix stall in __bitmap_parselist() Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 45/49] blk-mq: dont keep offline CPUs mapped to hctx 0 Greg Kroah-Hartman
2018-04-17 15:59 ` Greg Kroah-Hartman [this message]
2018-04-17 15:59 ` [PATCH 4.14 47/49] xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 48/49] hugetlbfs: fix bug in pgoff overflow checking Greg Kroah-Hartman
2018-04-17 15:59 ` [PATCH 4.14 49/49] nfsd: fix incorrect umasks Greg Kroah-Hartman
2018-04-17 21:05 ` [PATCH 4.14 00/49] 4.14.35-stable review Shuah Khan
2018-04-18 7:27 ` Naresh Kamboju
2018-04-18 15:38 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180417155717.228185033@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=amir73il@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mszeredi@redhat.com \
--cc=stable@vger.kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).