From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Xin Long , "David S. Miller" Subject: [PATCH 4.9 47/74] bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave Date: Fri, 27 Apr 2018 15:58:37 +0200 Message-Id: <20180427135711.876315795@linuxfoundation.org> In-Reply-To: <20180427135709.899303463@linuxfoundation.org> References: <20180427135709.899303463@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Xin Long [ Upstream commit ddea788c63094f7c483783265563dd5b50052e28 ] After Commit 8a8efa22f51b ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22f51b ("bonding: sync netpoll code with bridge") Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/bonding/bond_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1654,8 +1654,7 @@ int bond_enslave(struct net_device *bond } /* switch(bond_mode) */ #ifdef CONFIG_NET_POLL_CONTROLLER - slave_dev->npinfo = bond->dev->npinfo; - if (slave_dev->npinfo) { + if (bond->dev->npinfo) { if (slave_enable_netpoll(new_slave)) { netdev_info(bond_dev, "master_dev is using netpoll, but new slave device does not support netpoll\n"); res = -EBUSY;