[PATCH 3.18 18/25] mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joakim Tjernlund <joakim.tjernlund@transmode.se>

commit 6510bbc88e3258631831ade49033537081950605 upstream.

Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/chips/cfi_cmdset_0001.c |   16 +++++++++++-----
 include/linux/mtd/flashchip.h       |    1 +
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -825,21 +825,25 @@ static int chip_ready (struct map_info *
 		     (mode == FL_WRITING && (cfip->SuspendCmdSupport & 1))))
 			goto sleep;
 
+		/* Do not allow suspend iff read/write to EB address */
+		if ((adr & chip->in_progress_block_mask) ==
+		    chip->in_progress_block_addr)
+			goto sleep;
 
 		/* Erase suspend */
-		map_write(map, CMD(0xB0), adr);
+		map_write(map, CMD(0xB0), chip->in_progress_block_addr);
 
 		/* If the flash has finished erasing, then 'erase suspend'
 		 * appears to make some (28F320) flash devices switch to
 		 * 'read' mode.  Make sure that we switch to 'read status'
 		 * mode so we get the right data. --rmk
 		 */
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_ERASING;
 		chip->state = FL_ERASE_SUSPENDING;
 		chip->erase_suspended = 1;
 		for (;;) {
-			status = map_read(map, adr);
+			status = map_read(map, chip->in_progress_block_addr);
 			if (map_word_andequal(map, status, status_OK, status_OK))
 			        break;
 
@@ -1035,8 +1039,8 @@ static void put_chip(struct map_info *ma
 		   sending the 0x70 (Read Status) command to an erasing
 		   chip and expecting it to be ignored, that's what we
 		   do. */
-		map_write(map, CMD(0xd0), adr);
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0xd0), chip->in_progress_block_addr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_READY;
 		chip->state = FL_ERASING;
 		break;
@@ -1927,6 +1931,8 @@ static int __xipram do_erase_oneblock(st
 	map_write(map, CMD(0xD0), adr);
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
+	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(len - 1);
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
 				   adr, len,
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -85,6 +85,7 @@ struct flchip {
 	unsigned int write_suspended:1;
 	unsigned int erase_suspended:1;
 	unsigned long in_progress_block_addr;
+	unsigned long in_progress_block_mask;
 
 	struct mutex mutex;
 	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip