From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:34366 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756014AbeD3T1h (ORCPT ); Mon, 30 Apr 2018 15:27:37 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Anatolij Gustschin , Alan Tull , Moritz Fischer Subject: [PATCH 4.14 76/91] fpga-manager: altera-ps-spi: preserve nCONFIG state Date: Mon, 30 Apr 2018 12:24:58 -0700 Message-Id: <20180430184008.243601470@linuxfoundation.org> In-Reply-To: <20180430184004.216234025@linuxfoundation.org> References: <20180430184004.216234025@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Anatolij Gustschin commit 881c93c0fb73328845898344208fa0bf0d62cac6 upstream. If the driver module is loaded when FPGA is configured, the FPGA is reset because nconfig is pulled low (low-active gpio inited with GPIOD_OUT_HIGH activates the signal which means setting its value to low). Init nconfig with GPIOD_OUT_LOW to prevent this. Signed-off-by: Anatolij Gustschin Acked-by: Alan Tull Signed-off-by: Moritz Fischer Cc: stable # 4.14+ Signed-off-by: Greg Kroah-Hartman --- drivers/fpga/altera-ps-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/fpga/altera-ps-spi.c +++ b/drivers/fpga/altera-ps-spi.c @@ -249,7 +249,7 @@ static int altera_ps_probe(struct spi_de conf->data = of_id->data; conf->spi = spi; - conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH); + conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW); if (IS_ERR(conf->config)) { dev_err(&spi->dev, "Failed to get config gpio: %ld\n", PTR_ERR(conf->config));