[PATCH 4.14 00/43] 4.14.40-stable review

[PATCH 4.14 00/43] 4.14.40-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.40 release.
There are 43 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu May 10 07:39:32 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.40-rc1

Song Liu <songliubraving@fb.com>
    tracing: Fix bad use of igrab in trace_uprobe.c

Agustin Vega-Frias <agustinv@codeaurora.org>
    irqchip/qcom: Fix check for spurious interrupts

João Paulo Rechi Vita <jprvita@gmail.com>
    platform/x86: asus-wireless: Fix NULL pointer dereference

Bin Liu <b-liu@ti.com>
    usb: musb: trace: fix NULL pointer dereference in musb_g_tx()

Bin Liu <b-liu@ti.com>
    usb: musb: host: fix potential NULL pointer dereference

SZ Lin (林上智) <sz.lin@moxa.com>
    USB: serial: option: adding support for ublox R410M

Johan Hovold <johan@kernel.org>
    USB: serial: option: reimplement interface masking

Alan Stern <stern@rowland.harvard.edu>
    USB: Accept bulk endpoints with 1024-byte maxpacket

Mayank Rana <mrana@codeaurora.org>
    usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: serial: visor: handle potential invalid device configuration

Matthew Wilcox <willy@infradead.org>
    errseq: Always report a writeback error once

Ben Hutchings <ben.hutchings@codethink.co.uk>
    test_firmware: fix setting old custom fw path back on exit, second try

Sean Paul <seanpaul@chromium.org>
    drm/bridge: vga-dac: Fix edid memory leak

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Fix a buffer object leak

Bharat Potnuri <bharat@chelsio.com>
    iw_cxgb4: Atomically flush per QP HW CQEs

Sebastian Sanchez <sebastian.sanchez@intel.com>
    IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Fix loss of BECN with AHG

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Fix handling of FECN marked multicast packet

Danit Goldberg <danitg@mellanox.com>
    IB/mlx5: Use unlimited rate when static rate is not supported

SZ Lin (林上智) <sz.lin@moxa.com>
    NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2

Leon Romanovsky <leonro@mellanox.com>
    RDMA/mlx5: Protect from shift operand overflow

Leon Romanovsky <leonro@mellanox.com>
    RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow

Roland Dreier <roland@purestorage.com>
    RDMA/ucma: Allow resolving address w/o specifying source address

Raju Rangoju <rajur@chelsio.com>
    RDMA/cxgb4: release hw resources on device removal

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: prevent creating negative-sized file via INSERT_RANGE

Ping-Ke Shih <pkshih@realtek.com>
    rtlwifi: cleanup 8723be ant_sel definition

Ping-Ke Shih <pkshih@realtek.com>
    rtlwifi: btcoex: Add power_on_setting routine

Vittorio Gambaletta (VittGam) <linuxbugs@vittgam.net>
    Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: leds - fix out of bound access

Bryant G Ly <bryantly@linux.vnet.ibm.com>
    scsi: target: Fix fortify_panic kernel exception

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    tracepoint: Do not warn on ENOMEM

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Add missing cable lock to ctl API callbacks

Robert Rosengren <robert.rosengren@axis.com>
    ALSA: aloop: Mark paused device as inactive

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Check PCM state at xfern compat ioctl

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix incorrect usage of IS_REACHABLE()

Kristian Evensen <kristian.evensen@gmail.com>
    USB: serial: option: Add support for Quectel EP06

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    ACPI / button: make module loadable when booted in non-ACPI mode

LEROY Christophe <christophe.leroy@c-s.fr>
    crypto: talitos - fix IPsec cipher in length

Tejun Heo <tj@kernel.org>
    percpu: include linux/sched.h for cond_resched()

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    net: don't call update_pmtu unconditionally

Xin Long <lucien.xin@gmail.com>
    geneve: update skb dst pmtu on tx path


-------------

Diffstat:

 Makefile                                           |   4 +-
 drivers/acpi/button.c                              |  24 +-
 drivers/crypto/talitos.c                           |  41 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |   4 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c                |   1 +
 drivers/infiniband/core/ucma.c                     |   2 +-
 drivers/infiniband/hw/cxgb4/cq.c                   |  11 +-
 drivers/infiniband/hw/cxgb4/device.c               |   9 +-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h             |   6 +-
 drivers/infiniband/hw/cxgb4/qp.c                   |   4 +-
 drivers/infiniband/hw/cxgb4/resource.c             |  26 +-
 drivers/infiniband/hw/hfi1/driver.c                |  19 +-
 drivers/infiniband/hw/hfi1/hfi.h                   |   8 +-
 drivers/infiniband/hw/hfi1/init.c                  |   2 +
 drivers/infiniband/hw/hfi1/pcie.c                  |   3 -
 drivers/infiniband/hw/hfi1/ruc.c                   |  50 ++-
 drivers/infiniband/hw/hfi1/ud.c                    |   4 +-
 drivers/infiniband/hw/mlx5/mr.c                    |  32 +-
 drivers/infiniband/hw/mlx5/qp.c                    |  22 +-
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |   3 +-
 drivers/input/input-leds.c                         |   8 +-
 drivers/input/touchscreen/atmel_mxt_ts.c           |   9 +
 drivers/irqchip/qcom-irq-combiner.c                |   4 +-
 drivers/net/geneve.c                               |  14 +
 drivers/net/usb/qmi_wwan.c                         |   1 +
 drivers/net/vxlan.c                                |   6 +-
 .../realtek/rtlwifi/btcoexist/halbtcoutsrc.c       |  15 -
 .../realtek/rtlwifi/btcoexist/halbtcoutsrc.h       |   1 +
 .../wireless/realtek/rtlwifi/btcoexist/rtl_btc.c   |   6 +
 .../wireless/realtek/rtlwifi/btcoexist/rtl_btc.h   |   1 +
 .../net/wireless/realtek/rtlwifi/rtl8723be/hw.c    |  11 +-
 drivers/net/wireless/realtek/rtlwifi/wifi.h        |   6 +
 drivers/platform/x86/asus-wireless.c               |   4 +-
 drivers/target/target_core_iblock.c                |   8 +-
 drivers/usb/core/config.c                          |   4 +-
 drivers/usb/dwc3/gadget.c                          |   2 +-
 drivers/usb/musb/musb_gadget.c                     |   3 +-
 drivers/usb/musb/musb_host.c                       |   4 +-
 drivers/usb/serial/option.c                        | 448 ++++++++-------------
 drivers/usb/serial/visor.c                         |  69 ++--
 fs/xfs/xfs_file.c                                  |  14 +-
 include/net/dst.h                                  |   8 +
 kernel/trace/trace_uprobe.c                        |  24 +-
 kernel/tracepoint.c                                |   4 +-
 lib/errseq.c                                       |  25 +-
 mm/percpu.c                                        |   1 +
 net/ipv4/ip_tunnel.c                               |   3 +-
 net/ipv4/ip_vti.c                                  |   2 +-
 net/ipv6/ip6_tunnel.c                              |   5 +-
 net/ipv6/ip6_vti.c                                 |   2 +-
 net/ipv6/sit.c                                     |   4 +-
 sound/core/pcm_compat.c                            |   2 +
 sound/core/seq/seq_virmidi.c                       |   4 +-
 sound/drivers/aloop.c                              |  29 +-
 sound/firewire/amdtp-stream.c                      |   5 +-
 sound/pci/hda/patch_realtek.c                      |   2 +-
 tools/testing/selftests/firmware/fw_filesystem.sh  |   6 +-
 57 files changed, 547 insertions(+), 492 deletions(-)

[PATCH 4.14 01/43] geneve: update skb dst pmtu on tx path

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

commit 52a589d51f1008f62569bf89e95b26221ee76690 upstream.

Commit a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") has fixed
a performance issue caused by the change of lower dev's mtu for vxlan.

The same thing needs to be done for geneve as well.

Note that geneve cannot adjust it's mtu according to lower dev's mtu
when creating it. The performance is very low later when netperfing
over it without fixing the mtu manually. This patch could also avoid
this issue.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Thomas Deutschmann <whissi@gentoo.org>
Cc: Eddie Chapman <eddie@ehuk.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/geneve.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -825,6 +825,13 @@ static int geneve_xmit_skb(struct sk_buf
 	if (IS_ERR(rt))
 		return PTR_ERR(rt);
 
+	if (skb_dst(skb)) {
+		int mtu = dst_mtu(&rt->dst) - sizeof(struct iphdr) -
+			  GENEVE_BASE_HLEN - info->options_len - 14;
+
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+	}
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		tos = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);
@@ -864,6 +871,13 @@ static int geneve6_xmit_skb(struct sk_bu
 	if (IS_ERR(dst))
 		return PTR_ERR(dst);
 
+	if (skb_dst(skb)) {
+		int mtu = dst_mtu(dst) - sizeof(struct ipv6hdr) -
+			  GENEVE_BASE_HLEN - info->options_len - 14;
+
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+	}
+
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		prio = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);

[PATCH 4.14 02/43] net: dont call update_pmtu unconditionally

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

commit f15ca723c1ebe6c1a06bc95fda6b62cd87b44559 upstream.

Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at           (null)"

Let's add a helper to check if update_pmtu is available before calling it.

Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Thomas Deutschmann <whissi@gentoo.org>
Cc: Eddie Chapman <eddie@ehuk.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c |    3 +--
 drivers/net/geneve.c                    |    4 ++--
 drivers/net/vxlan.c                     |    6 ++----
 include/net/dst.h                       |    8 ++++++++
 net/ipv4/ip_tunnel.c                    |    3 +--
 net/ipv4/ip_vti.c                       |    2 +-
 net/ipv6/ip6_tunnel.c                   |    5 ++---
 net/ipv6/ip6_vti.c                      |    2 +-
 net/ipv6/sit.c                          |    4 ++--
 9 files changed, 20 insertions(+), 17 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1447,8 +1447,7 @@ void ipoib_cm_skb_too_long(struct net_de
 	struct ipoib_dev_priv *priv = ipoib_priv(dev);
 	int e = skb_queue_empty(&priv->cm.skb_queue);
 
-	if (skb_dst(skb))
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+	skb_dst_update_pmtu(skb, mtu);
 
 	skb_queue_tail(&priv->cm.skb_queue, skb);
 	if (e)
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -829,7 +829,7 @@ static int geneve_xmit_skb(struct sk_buf
 		int mtu = dst_mtu(&rt->dst) - sizeof(struct iphdr) -
 			  GENEVE_BASE_HLEN - info->options_len - 14;
 
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+		skb_dst_update_pmtu(skb, mtu);
 	}
 
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
@@ -875,7 +875,7 @@ static int geneve6_xmit_skb(struct sk_bu
 		int mtu = dst_mtu(dst) - sizeof(struct ipv6hdr) -
 			  GENEVE_BASE_HLEN - info->options_len - 14;
 
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+		skb_dst_update_pmtu(skb, mtu);
 	}
 
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2158,8 +2158,7 @@ static void vxlan_xmit_one(struct sk_buf
 		if (skb_dst(skb)) {
 			int mtu = dst_mtu(ndst) - VXLAN_HEADROOM;
 
-			skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL,
-						       skb, mtu);
+			skb_dst_update_pmtu(skb, mtu);
 		}
 
 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
@@ -2200,8 +2199,7 @@ static void vxlan_xmit_one(struct sk_buf
 		if (skb_dst(skb)) {
 			int mtu = dst_mtu(ndst) - VXLAN6_HEADROOM;
 
-			skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL,
-						       skb, mtu);
+			skb_dst_update_pmtu(skb, mtu);
 		}
 
 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -520,4 +520,12 @@ static inline struct xfrm_state *dst_xfr
 }
 #endif
 
+static inline void skb_dst_update_pmtu(struct sk_buff *skb, u32 mtu)
+{
+	struct dst_entry *dst = skb_dst(skb);
+
+	if (dst && dst->ops->update_pmtu)
+		dst->ops->update_pmtu(dst, NULL, skb, mtu);
+}
+
 #endif /* _NET_DST_H */
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -521,8 +521,7 @@ static int tnl_update_pmtu(struct net_de
 	else
 		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
-	if (skb_dst(skb))
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+	skb_dst_update_pmtu(skb, mtu);
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		if (!skb_is_gso(skb) &&
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -209,7 +209,7 @@ static netdev_tx_t vti_xmit(struct sk_bu
 
 	mtu = dst_mtu(dst);
 	if (skb->len > mtu) {
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+		skb_dst_update_pmtu(skb, mtu);
 		if (skb->protocol == htons(ETH_P_IP)) {
 			icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
 				  htonl(mtu));
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -652,7 +652,7 @@ ip4ip6_err(struct sk_buff *skb, struct i
 		if (rel_info > dst_mtu(skb_dst(skb2)))
 			goto out;
 
-		skb_dst(skb2)->ops->update_pmtu(skb_dst(skb2), NULL, skb2, rel_info);
+		skb_dst_update_pmtu(skb2, rel_info);
 	}
 	if (rel_type == ICMP_REDIRECT)
 		skb_dst(skb2)->ops->redirect(skb_dst(skb2), NULL, skb2);
@@ -1141,8 +1141,7 @@ route_lookup:
 		mtu = 576;
 	}
 
-	if (skb_dst(skb) && !t->parms.collect_md)
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+	skb_dst_update_pmtu(skb, mtu);
 	if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) {
 		*pmtu = mtu;
 		err = -EMSGSIZE;
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -486,7 +486,7 @@ vti6_xmit(struct sk_buff *skb, struct ne
 
 	mtu = dst_mtu(dst);
 	if (!skb->ignore_df && skb->len > mtu) {
-		skb_dst(skb)->ops->update_pmtu(dst, NULL, skb, mtu);
+		skb_dst_update_pmtu(skb, mtu);
 
 		if (skb->protocol == htons(ETH_P_IPV6)) {
 			if (mtu < IPV6_MIN_MTU)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -925,8 +925,8 @@ static netdev_tx_t ipip6_tunnel_xmit(str
 			df = 0;
 		}
 
-		if (tunnel->parms.iph.daddr && skb_dst(skb))
-			skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
+		if (tunnel->parms.iph.daddr)
+			skb_dst_update_pmtu(skb, mtu);
 
 		if (skb->len > mtu && !skb_is_gso(skb)) {
 			icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);

[PATCH 4.14 03/43] percpu: include linux/sched.h for cond_resched()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 71546d100422bcc2c543dadeb9328728997cd23a upstream.

microblaze build broke due to missing declaration of the
cond_resched() invocation added recently.  Let's include linux/sched.h
explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/percpu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -80,6 +80,7 @@
 #include <linux/vmalloc.h>
 #include <linux/workqueue.h>
 #include <linux/kmemleak.h>
+#include <linux/sched.h>
 
 #include <asm/cacheflush.h>
 #include <asm/sections.h>

[PATCH 4.14 05/43] ACPI / button: make module loadable when booted in non-ACPI mode

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit ac1e55b1fdb27c1b07a0a6fe519f1291ff1e7d40 upstream.

Modules such as nouveau.ko and i915.ko have a link time dependency on
acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
the button.ko module that provides it is only loadable when booted in
ACPI mode. However, the ACPI button driver can be built into the core
kernel as well, in which case the dependency can always be satisfied,
and the dependent modules can be loaded regardless of whether the
system was booted in ACPI mode or not.

So let's fix this asymmetry by making the ACPI button driver loadable
as a module even if not booted in ACPI mode, so it can provide the
acpi_lid_open() symbol in the same way as when built into the kernel.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ rjw: Minor adjustments of comments, whitespace and names. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/button.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -595,4 +595,26 @@ module_param_call(lid_init_state,
 		  NULL, 0644);
 MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
 
-module_acpi_driver(acpi_button_driver);
+static int acpi_button_register_driver(struct acpi_driver *driver)
+{
+	/*
+	 * Modules such as nouveau.ko and i915.ko have a link time dependency
+	 * on acpi_lid_open(), and would therefore not be loadable on ACPI
+	 * capable kernels booted in non-ACPI mode if the return value of
+	 * acpi_bus_register_driver() is returned from here with ACPI disabled
+	 * when this driver is built as a module.
+	 */
+	if (acpi_disabled)
+		return 0;
+
+	return acpi_bus_register_driver(driver);
+}
+
+static void acpi_button_unregister_driver(struct acpi_driver *driver)
+{
+	if (!acpi_disabled)
+		acpi_bus_unregister_driver(driver);
+}
+
+module_driver(acpi_button_driver, acpi_button_register_driver,
+	       acpi_button_unregister_driver);

[PATCH 4.14 07/43] ALSA: hda - Fix incorrect usage of IS_REACHABLE()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 6a30abaa40b62aed46ef12ea4c16c48565bdb376 upstream.

The commit c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for
dependency on input") simplified the dependencies with IS_REACHABLE()
macro, but it broke due to its incorrect usage: it should have been
IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT).

Fixes: c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3722,7 +3722,7 @@ static void alc280_fixup_hp_gpio4(struct
 	}
 }
 
-#if IS_REACHABLE(INPUT)
+#if IS_REACHABLE(CONFIG_INPUT)
 static void gpio2_mic_hotkey_event(struct hda_codec *codec,
 				   struct hda_jack_callback *event)
 {

[PATCH 4.14 08/43] ALSA: pcm: Check PCM state at xfern compat ioctl

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit f13876e2c33a657a71bcbb10f767c0951b165020 upstream.

Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go
further and hit the sanity check pcm_sanity_check() when the ioctl is
called right after open.  It may eventually spew a kernel warning, as
triggered by syzbot, depending on kconfig.

The lack of PCM state check there was just an oversight.  Although
it's no real crash, the spurious kernel warning is annoying, so let's
add the proper check.

Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/pcm_compat.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -423,6 +423,8 @@ static int snd_pcm_ioctl_xfern_compat(st
 		return -ENOTTY;
 	if (substream->stream != dir)
 		return -EINVAL;
+	if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN)
+		return -EBADFD;
 
 	if ((ch = substream->runtime->channels) > 128)
 		return -EINVAL;

[PATCH 4.14 09/43] ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 8f22e52528cc372b218b5f100457469615c733ce upstream.

The sequencer virmidi code has an open race at its output trigger
callback: namely, virmidi keeps only one event packet for processing
while it doesn't protect for concurrent output trigger calls.

snd_virmidi_output_trigger() tries to process the previously
unfinished event before starting encoding the given MIDI stream, but
this is done without any lock.  Meanwhile, if another rawmidi stream
starts the output trigger, this proceeds further, and overwrites the
event package that is being processed in another thread.  This
eventually corrupts and may lead to the invalid memory access if the
event type is like SYSEX.

The fix is just to move the spinlock to cover both the pending event
and the new stream.

The bug was spotted by a new fuzzer, RaceFuzzer.

BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_virmidi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -174,12 +174,12 @@ static void snd_virmidi_output_trigger(s
 			}
 			return;
 		}
+		spin_lock_irqsave(&substream->runtime->lock, flags);
 		if (vmidi->event.type != SNDRV_SEQ_EVENT_NONE) {
 			if (snd_seq_kernel_client_dispatch(vmidi->client, &vmidi->event, in_atomic(), 0) < 0)
-				return;
+				goto out;
 			vmidi->event.type = SNDRV_SEQ_EVENT_NONE;
 		}
-		spin_lock_irqsave(&substream->runtime->lock, flags);
 		while (1) {
 			count = __snd_rawmidi_transmit_peek(substream, buf, sizeof(buf));
 			if (count <= 0)

[PATCH 4.14 10/43] ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 52759c0963510a2843774aac9b65ccaed3308dc0 upstream.

At a commit f91c9d7610a ('ALSA: firewire-lib: cache maximum length of
payload to reduce function calls'), maximum size of payload for tx
isochronous packet is cached to reduce the number of function calls.

This cache was programmed to updated at a first callback of ohci1394 IR
context. However, the maximum size is required to queueing packets before
starting the isochronous context.

As a result, the cached value is reused to queue packets in next time to
starting the isochronous context. Then the cache is updated in a first
callback of the isochronous context. This can cause kernel NULL pointer
dereference in a below call graph:

(sound/firewire/amdtp-stream.c)
amdtp_stream_start()
->queue_in_packet()
  ->queue_packet()
    (drivers/firewire/core-iso.c)
    ->fw_iso_context_queue()
      ->struct fw_card_driver.queue_iso()
      (drivers/firewire/ohci.c)
      = ohci_queue_iso()
        ->queue_iso_packet_per_buffer()
          buffer->pages[page]

The issued dereference occurs in a case that:
 - target unit supports different stream formats for sampling transmission
   frequency.
 - maximum length of payload for tx stream in a first trial is bigger
   than the length in a second trial.

In this case, correct number of pages are allocated for DMA and the 'pages'
array has enough elements, while index of the element is wrongly calculated
according to the old value of length of payload in a call of
'queue_in_packet()'. Then it causes the issue.

This commit fixes the critical bug. This affects all of drivers in ALSA
firewire stack in Linux kernel v4.12 or later.

[12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.302439] PGD 0
[12665.302440] P4D 0
[12665.302450]
[12665.302470] Oops: 0000 [#1] SMP PTI
[12665.302487] Modules linked in: ...
[12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P           OE   4.13.0-38-generic #43-Ubuntu
[12665.303154] Hardware name:                  /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012
[12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000
[12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086
[12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0
[12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000
[12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0
[12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003
[12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000
[12665.303554] FS:  00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000
[12665.303600] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0
[12665.303674] Call Trace:
[12665.303698]  fw_iso_context_queue+0x18/0x20 [firewire_core]
[12665.303735]  queue_packet+0x88/0xe0 [snd_firewire_lib]
[12665.303770]  amdtp_stream_start+0x19b/0x270 [snd_firewire_lib]
[12665.303811]  start_streams+0x276/0x3c0 [snd_dice]
[12665.303840]  snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice]
[12665.303882]  ? vma_gap_callbacks_rotate+0x1e/0x30
[12665.303914]  ? __rb_insert_augmented+0xab/0x240
[12665.303936]  capture_prepare+0x3c/0x70 [snd_dice]
[12665.303961]  snd_pcm_do_prepare+0x1d/0x30 [snd_pcm]
[12665.303985]  snd_pcm_action_single+0x3b/0x90 [snd_pcm]
[12665.304009]  snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm]
[12665.304035]  snd_pcm_prepare+0x68/0x90 [snd_pcm]
[12665.304058]  snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm]
[12665.304083]  snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm]
[12665.304108]  snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[12665.304131]  do_vfs_ioctl+0xa8/0x630
[12665.304148]  ? entry_SYSCALL_64_after_hwframe+0xe9/0x139
[12665.304172]  ? entry_SYSCALL_64_after_hwframe+0xe2/0x139
[12665.304195]  ? entry_SYSCALL_64_after_hwframe+0xdb/0x139
[12665.304218]  ? entry_SYSCALL_64_after_hwframe+0xd4/0x139
[12665.304242]  ? entry_SYSCALL_64_after_hwframe+0xcd/0x139
[12665.304265]  ? entry_SYSCALL_64_after_hwframe+0xc6/0x139
[12665.304288]  ? entry_SYSCALL_64_after_hwframe+0xbf/0x139
[12665.304312]  ? entry_SYSCALL_64_after_hwframe+0xb8/0x139
[12665.304335]  ? entry_SYSCALL_64_after_hwframe+0xb1/0x139
[12665.304358]  SyS_ioctl+0x79/0x90
[12665.304374]  ? entry_SYSCALL_64_after_hwframe+0x72/0x139
[12665.304397]  entry_SYSCALL_64_fastpath+0x24/0xab
[12665.304417] RIP: 0033:0x7f2ec3750ef7
[12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7
[12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007
[12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000
[12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0
[12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000
[12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00
[12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8
[12665.304743] CR2: 0000000000000030
[12665.317701] ---[ end trace 9d55b056dd52a19f ]---

Fixes: f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls')
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/amdtp-stream.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -773,8 +773,6 @@ static void amdtp_stream_first_callback(
 	u32 cycle;
 	unsigned int packets;
 
-	s->max_payload_length = amdtp_stream_get_max_payload(s);
-
 	/*
 	 * For in-stream, first packet has come.
 	 * For out-stream, prepared to transmit first packet
@@ -879,6 +877,9 @@ int amdtp_stream_start(struct amdtp_stre
 
 	amdtp_stream_update(s);
 
+	if (s->direction == AMDTP_IN_STREAM)
+		s->max_payload_length = amdtp_stream_get_max_payload(s);
+
 	if (s->flags & CIP_NO_HEADER)
 		s->tag = TAG_NO_CIP_HEADER;
 	else

[PATCH 4.14 11/43] ALSA: aloop: Mark paused device as inactive

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Rosengren <robert.rosengren@axis.com>

commit 306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream.

Show paused ALSA aloop device as inactive, i.e. the control
"PCM Slave Active" set as false. Notification sent upon state change.

This makes it possible for client capturing from aloop device to know if
data is expected. Without it the client expects data even if playback
is paused.

Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -296,6 +296,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause |= stream;
 		loopback_timer_stop(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
@@ -304,6 +306,8 @@ static int loopback_trigger(struct snd_p
 		cable->pause &= ~stream;
 		loopback_timer_start(dpcm);
 		spin_unlock(&cable->lock);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			loopback_active_notify(dpcm);
 		break;
 	default:
 		return -EINVAL;
@@ -893,9 +897,11 @@ static int loopback_active_get(struct sn
 			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	unsigned int val = 0;
 
-	if (cable != NULL)
-		val = (cable->running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ?
-									1 : 0;
+	if (cable != NULL) {
+		unsigned int running = cable->running ^ cable->pause;
+
+		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
+	}
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }

[PATCH 4.14 12/43] ALSA: aloop: Add missing cable lock to ctl API callbacks

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 76b3421b39bd610546931fc923edcf90c18fa395 upstream.

Some control API callbacks in aloop driver are too lazy to take the
loopback->cable_lock and it results in possible races of cable access
while it's being freed.  It eventually lead to a UAF, as reported by
fuzzer recently.

This patch covers such control API callbacks and add the proper mutex
locks.

Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -832,9 +832,11 @@ static int loopback_rate_shift_get(struc
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate_shift;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -866,9 +868,11 @@ static int loopback_notify_get(struct sn
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].notify;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -880,12 +884,14 @@ static int loopback_notify_put(struct sn
 	int change = 0;
 
 	val = ucontrol->value.integer.value[0] ? 1 : 0;
+	mutex_lock(&loopback->cable_lock);
 	if (val != loopback->setup[kcontrol->id.subdevice]
 				[kcontrol->id.device].notify) {
 		loopback->setup[kcontrol->id.subdevice]
 			[kcontrol->id.device].notify = val;
 		change = 1;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	return change;
 }
 
@@ -893,15 +899,18 @@ static int loopback_active_get(struct sn
 			       struct snd_ctl_elem_value *ucontrol)
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
-	struct loopback_cable *cable = loopback->cables
-			[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
+	struct loopback_cable *cable;
+
 	unsigned int val = 0;
 
+	mutex_lock(&loopback->cable_lock);
+	cable = loopback->cables[kcontrol->id.subdevice][kcontrol->id.device ^ 1];
 	if (cable != NULL) {
 		unsigned int running = cable->running ^ cable->pause;
 
 		val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0;
 	}
+	mutex_unlock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] = val;
 	return 0;
 }
@@ -944,9 +953,11 @@ static int loopback_rate_get(struct snd_
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].rate;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 
@@ -966,9 +977,11 @@ static int loopback_channels_get(struct
 {
 	struct loopback *loopback = snd_kcontrol_chip(kcontrol);
 	
+	mutex_lock(&loopback->cable_lock);
 	ucontrol->value.integer.value[0] =
 		loopback->setup[kcontrol->id.subdevice]
 			       [kcontrol->id.device].channels;
+	mutex_unlock(&loopback->cable_lock);
 	return 0;
 }
 

[PATCH 4.14 13/43] tracepoint: Do not warn on ENOMEM

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit d66a270be3310d7aa132fec0cea77d3d32a0ff75 upstream.

Tracepoint should only warn when a kernel API user does not respect the
required preconditions (e.g. same tracepoint enabled twice, or called
to remove a tracepoint that does not exist).

Silence warning in out-of-memory conditions, given that the error is
returned to the caller.

This ensures that out-of-memory error-injection testing does not trigger
warnings in tracepoint.c, which were seen by syzbot.

Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com
Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com
Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com

CC: Peter Zijlstra <peterz@infradead.org>
CC: Jiri Olsa <jolsa@redhat.com>
CC: Arnaldo Carvalho de Melo <acme@kernel.org>
CC: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: Namhyung Kim <namhyung@kernel.org>
CC: stable@vger.kernel.org
Fixes: de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints")
Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com
Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/tracepoint.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -207,7 +207,7 @@ static int tracepoint_add_func(struct tr
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_add(&tp_funcs, func, prio);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 
@@ -240,7 +240,7 @@ static int tracepoint_remove_func(struct
 			lockdep_is_held(&tracepoints_mutex));
 	old = func_remove(&tp_funcs, func);
 	if (IS_ERR(old)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(PTR_ERR(old) != -ENOMEM);
 		return PTR_ERR(old);
 	}
 

[PATCH 4.14 14/43] scsi: target: Fix fortify_panic kernel exception

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryant G Ly <bryantly@linux.vnet.ibm.com>

commit f5957dade4f373b04fa1f5315a489f18cc2c4cb4 upstream.

memcmp() requires the two buffers passed as arguments to be at least
'size' bytes long, otherwise a fortify_panic will trigger.

Use memchr_inv() instead of memcmp() to determine whether the received
payload is zeroed or not.

The bug was found by running a block backstore via LIO.

[  496.212958] Call Trace:
[  496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable)
[  496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock]
[  496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod]
[  496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis]
[  496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod]
[  496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod]
[  496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod]
[  496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod]
[  496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis]
[  496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580
[  496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600
[  496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0
[  496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4

[mkp: tweaked commit message]

Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Tested-by: Taylor Jakobson <tjakobs@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_iblock.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -427,8 +427,8 @@ iblock_execute_zero_out(struct block_dev
 {
 	struct se_device *dev = cmd->se_dev;
 	struct scatterlist *sg = &cmd->t_data_sg[0];
-	unsigned char *buf, zero = 0x00, *p = &zero;
-	int rc, ret;
+	unsigned char *buf, *not_zero;
+	int ret;
 
 	buf = kmap(sg_page(sg)) + sg->offset;
 	if (!buf)
@@ -437,10 +437,10 @@ iblock_execute_zero_out(struct block_dev
 	 * Fall back to block_execute_write_same() slow-path if
 	 * incoming WRITE_SAME payload does not contain zeros.
 	 */
-	rc = memcmp(buf, p, cmd->data_length);
+	not_zero = memchr_inv(buf, 0x00, cmd->data_length);
 	kunmap(sg_page(sg));
 
-	if (rc)
+	if (not_zero)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	ret = blkdev_issue_zeroout(bdev,

[PATCH 4.14 15/43] Input: leds - fix out of bound access

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream.

UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:

[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128

This happens because we were writing to the led structure before making
sure that it exists.

Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/input-leds.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/input/input-leds.c
+++ b/drivers/input/input-leds.c
@@ -88,6 +88,7 @@ static int input_leds_connect(struct inp
 			      const struct input_device_id *id)
 {
 	struct input_leds *leds;
+	struct input_led *led;
 	unsigned int num_leds;
 	unsigned int led_code;
 	int led_no;
@@ -119,14 +120,13 @@ static int input_leds_connect(struct inp
 
 	led_no = 0;
 	for_each_set_bit(led_code, dev->ledbit, LED_CNT) {
-		struct input_led *led = &leds->leds[led_no];
+		if (!input_led_info[led_code].name)
+			continue;
 
+		led = &leds->leds[led_no];
 		led->handle = &leds->handle;
 		led->code = led_code;
 
-		if (!input_led_info[led_code].name)
-			continue;
-
 		led->cdev.name = kasprintf(GFP_KERNEL, "%s::%s",
 					   dev_name(&dev->dev),
 					   input_led_info[led_code].name);

[PATCH 4.14 16/43] Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) <linuxbugs@vittgam.net>

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.

The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Tested-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/touchscreen/atmel_mxt_ts.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3031,6 +3031,15 @@ static const struct dmi_system_id mxt_dm
 		.driver_data = samus_platform_data,
 	},
 	{
+		/* Samsung Chromebook Pro */
+		.ident = "Samsung Chromebook Pro",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{
 		/* Other Google Chromebooks */
 		.ident = "Chromebook",
 		.matches = {

[PATCH 4.14 17/43] rtlwifi: btcoex: Add power_on_setting routine

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ping-Ke Shih <pkshih@realtek.com>

commit a44709bba70fb9badc44b6a551415b152db13182 upstream.

After mac power-on sequence, wifi will start to work so notify btcoex the
event to configure registers especially related to antenna. This will not
only help to assign antenna but also to yield better user experience.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h |    1 +
 drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c      |    6 ++++++
 drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.h      |    1 +
 drivers/net/wireless/realtek/rtlwifi/wifi.h                   |    1 +
 4 files changed, 9 insertions(+)

--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
@@ -601,6 +601,7 @@ extern struct btc_coexist gl_bt_coexist;
 
 bool exhalbtc_initlize_variables(void);
 bool exhalbtc_bind_bt_coex_withadapter(void *adapter);
+void exhalbtc_power_on_setting(struct btc_coexist *btcoexist);
 void exhalbtc_init_hw_config(struct btc_coexist *btcoexist, bool wifi_only);
 void exhalbtc_init_coex_dm(struct btc_coexist *btcoexist);
 void exhalbtc_ips_notify(struct btc_coexist *btcoexist, u8 type);
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
@@ -32,6 +32,7 @@
 static struct rtl_btc_ops rtl_btc_operation = {
 	.btc_init_variables = rtl_btc_init_variables,
 	.btc_init_hal_vars = rtl_btc_init_hal_vars,
+	.btc_power_on_setting = rtl_btc_power_on_setting,
 	.btc_init_hw_config = rtl_btc_init_hw_config,
 	.btc_ips_notify = rtl_btc_ips_notify,
 	.btc_lps_notify = rtl_btc_lps_notify,
@@ -110,6 +111,11 @@ void rtl_btc_init_hal_vars(struct rtl_pr
 	 */
 }
 
+void rtl_btc_power_on_setting(struct rtl_priv *rtlpriv)
+{
+	exhalbtc_power_on_setting(&gl_bt_coexist);
+}
+
 void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
 {
 	u8 bt_exist;
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.h
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.h
@@ -29,6 +29,7 @@
 
 void rtl_btc_init_variables(struct rtl_priv *rtlpriv);
 void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv);
+void rtl_btc_power_on_setting(struct rtl_priv *rtlpriv);
 void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv);
 void rtl_btc_ips_notify(struct rtl_priv *rtlpriv, u8 type);
 void rtl_btc_lps_notify(struct rtl_priv *rtlpriv, u8 type);
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2545,6 +2545,7 @@ struct bt_coexist_info {
 struct rtl_btc_ops {
 	void (*btc_init_variables) (struct rtl_priv *rtlpriv);
 	void (*btc_init_hal_vars) (struct rtl_priv *rtlpriv);
+	void (*btc_power_on_setting)(struct rtl_priv *rtlpriv);
 	void (*btc_init_hw_config) (struct rtl_priv *rtlpriv);
 	void (*btc_ips_notify) (struct rtl_priv *rtlpriv, u8 type);
 	void (*btc_lps_notify)(struct rtl_priv *rtlpriv, u8 type);

[PATCH 4.14 18/43] rtlwifi: cleanup 8723be ant_sel definition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ping-Ke Shih <pkshih@realtek.com>

commit af8a41cccf8f469165c6debc8fe07c5fd2ca501a upstream.

Some HP laptops have only a single wifi antenna. This would not be a
problem except that they were shipped with an incorrectly encoded
EFUSE. It should have been possible to open the computer and transfer
the antenna connection to the other terminal except that such action
might void the warranty, and moving the antenna broke the Windows
driver. The fix was to add a module option that would override the
EFUSE encoding. That was done with commit c18d8f509571 ("rtlwifi:
rtl8723be: Add antenna select module parameter"). There was still a
problem with Bluetooth coexistence, which was addressed with commit
baa170229095 ("rtlwifi: btcoexist: Implement antenna selection").
There were still problems, thus there were commit 0ff78adeef11
("rtlwifi: rtl8723be: fix ant_sel code") and commit 6d6226928369
("rtlwifi: btcoexist: Fix antenna selection code"). Despite all these
attempts at fixing the problem, the code is not yet right. A proper
fix is important as there are now instances of laptops having
RTL8723DE chips with the same problem.

The module parameter ant_sel is used to control antenna number and path.
At present enum ANT_{X2,X1} is used to define the antenna number, but
this choice is not intuitive, thus change to a new enum ANT_{MAIN,AUX}
to make it more readable. This change showed examples where incorrect
values were used. It was also possible to remove a workaround in
halbtcoutsrc.c.

The experimental results with single antenna connected to specific path
are now as follows:
  ant_sel  ANT_MAIN(#1)  ANT_AUX(#2)
     0        -8            -62
     1        -62           -10
     2        -6            -60

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Fixes: c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter")
Fixes: baa170229095 ("rtlwifi: btcoexist: Implement antenna selection")
Fixes: 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code")
Fixes: 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code")
Cc: Stable <stable@vger.kernel.org> # 4.7+
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c |   15 ----------
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c           |   11 ++++---
 drivers/net/wireless/realtek/rtlwifi/wifi.h                   |    5 +++
 3 files changed, 12 insertions(+), 19 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -173,16 +173,6 @@ static u8 halbtc_get_wifi_central_chnl(s
 
 u8 rtl_get_hwpg_single_ant_path(struct rtl_priv *rtlpriv)
 {
-	struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
-
-	/* override ant_num / ant_path */
-	if (mod_params->ant_sel) {
-		rtlpriv->btcoexist.btc_info.ant_num =
-			(mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
-
-		rtlpriv->btcoexist.btc_info.single_ant_path =
-			(mod_params->ant_sel == 1 ? 0 : 1);
-	}
 	return rtlpriv->btcoexist.btc_info.single_ant_path;
 }
 
@@ -193,7 +183,6 @@ u8 rtl_get_hwpg_bt_type(struct rtl_priv
 
 u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
 {
-	struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
 	u8 num;
 
 	if (rtlpriv->btcoexist.btc_info.ant_num == ANT_X2)
@@ -201,10 +190,6 @@ u8 rtl_get_hwpg_ant_num(struct rtl_priv
 	else
 		num = 1;
 
-	/* override ant_num / ant_path */
-	if (mod_params->ant_sel)
-		num = (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1) + 1;
-
 	return num;
 }
 
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -846,6 +846,9 @@ static bool _rtl8723be_init_mac(struct i
 		return false;
 	}
 
+	if (rtlpriv->cfg->ops->get_btc_status())
+		rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv);
+
 	bytetmp = rtl_read_byte(rtlpriv, REG_MULTI_FUNC_CTRL);
 	rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, bytetmp | BIT(3));
 
@@ -2696,21 +2699,21 @@ void rtl8723be_read_bt_coexist_info_from
 		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
 		rtlpriv->btcoexist.btc_info.ant_num = (value & 0x1);
 		rtlpriv->btcoexist.btc_info.single_ant_path =
-			 (value & 0x40);	/*0xc3[6]*/
+			 (value & 0x40 ? ANT_AUX : ANT_MAIN);	/*0xc3[6]*/
 	} else {
 		rtlpriv->btcoexist.btc_info.btcoexist = 0;
 		rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
 		rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
-		rtlpriv->btcoexist.btc_info.single_ant_path = 0;
+		rtlpriv->btcoexist.btc_info.single_ant_path = ANT_MAIN;
 	}
 
 	/* override ant_num / ant_path */
 	if (mod_params->ant_sel) {
 		rtlpriv->btcoexist.btc_info.ant_num =
-			(mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
+			(mod_params->ant_sel == 1 ? ANT_X1 : ANT_X2);
 
 		rtlpriv->btcoexist.btc_info.single_ant_path =
-			(mod_params->ant_sel == 1 ? 0 : 1);
+			(mod_params->ant_sel == 1 ? ANT_AUX : ANT_MAIN);
 	}
 }
 
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2708,6 +2708,11 @@ enum bt_ant_num {
 	ANT_X1 = 1,
 };
 
+enum bt_ant_path {
+	ANT_MAIN = 0,
+	ANT_AUX = 1,
+};
+
 enum bt_co_type {
 	BT_2WIRE = 0,
 	BT_ISSC_3WIRE = 1,

[PATCH 4.14 19/43] xfs: prevent creating negative-sized file via INSERT_RANGE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <darrick.wong@oracle.com>

commit 7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream.

During the "insert range" fallocate operation, i_size grows by the
specified 'len' bytes.  XFS verifies that i_size + len < s_maxbytes, as
it should.  But this comparison is done using the signed 'loff_t', and
'i_size + len' can wrap around to a negative value, causing the check to
incorrectly pass, resulting in an inode with "negative" i_size.  This is
possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX.
ext4 and f2fs don't run into this because they set a smaller s_maxbytes.

Fix it by using subtraction instead.

Reproducer:
    xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"

Fixes: a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: <stable@vger.kernel.org> # v4.1+
Originally-From: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix signed integer addition overflow too]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_file.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -811,22 +811,26 @@ xfs_file_fallocate(
 		if (error)
 			goto out_unlock;
 	} else if (mode & FALLOC_FL_INSERT_RANGE) {
-		unsigned int blksize_mask = i_blocksize(inode) - 1;
+		unsigned int	blksize_mask = i_blocksize(inode) - 1;
+		loff_t		isize = i_size_read(inode);
 
-		new_size = i_size_read(inode) + len;
 		if (offset & blksize_mask || len & blksize_mask) {
 			error = -EINVAL;
 			goto out_unlock;
 		}
 
-		/* check the new inode size does not wrap through zero */
-		if (new_size > inode->i_sb->s_maxbytes) {
+		/*
+		 * New inode size must not exceed ->s_maxbytes, accounting for
+		 * possible signed overflow.
+		 */
+		if (inode->i_sb->s_maxbytes - isize < len) {
 			error = -EFBIG;
 			goto out_unlock;
 		}
+		new_size = isize + len;
 
 		/* Offset should be less than i_size */
-		if (offset >= i_size_read(inode)) {
+		if (offset >= isize) {
 			error = -EINVAL;
 			goto out_unlock;
 		}

[PATCH 4.14 20/43] RDMA/cxgb4: release hw resources on device removal

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <rajur@chelsio.com>

commit 26bff1bd74a4f7417509a83295614e9dab995b2a upstream.

The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().

The module remove function will wait for all the hw
resources to be released during the device removal event.

Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/cxgb4/device.c   |    9 ++++++++-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h |    4 ++++
 drivers/infiniband/hw/cxgb4/resource.c |   26 ++++++++++++++++++++++++--
 3 files changed, 36 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -884,6 +884,11 @@ static int c4iw_rdev_open(struct c4iw_rd
 
 	rdev->status_page->db_off = 0;
 
+	init_completion(&rdev->rqt_compl);
+	init_completion(&rdev->pbl_compl);
+	kref_init(&rdev->rqt_kref);
+	kref_init(&rdev->pbl_kref);
+
 	return 0;
 err_free_status_page_and_wr_log:
 	if (c4iw_wr_log && rdev->wr_log)
@@ -902,13 +907,15 @@ destroy_resource:
 
 static void c4iw_rdev_close(struct c4iw_rdev *rdev)
 {
-	destroy_workqueue(rdev->free_workq);
 	kfree(rdev->wr_log);
 	c4iw_release_dev_ucontext(rdev, &rdev->uctx);
 	free_page((unsigned long)rdev->status_page);
 	c4iw_pblpool_destroy(rdev);
 	c4iw_rqtpool_destroy(rdev);
+	wait_for_completion(&rdev->pbl_compl);
+	wait_for_completion(&rdev->rqt_compl);
 	c4iw_ocqp_pool_destroy(rdev);
+	destroy_workqueue(rdev->free_workq);
 	c4iw_destroy_resource(&rdev->resource);
 }
 
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -185,6 +185,10 @@ struct c4iw_rdev {
 	struct wr_log_entry *wr_log;
 	int wr_log_size;
 	struct workqueue_struct *free_workq;
+	struct completion rqt_compl;
+	struct completion pbl_compl;
+	struct kref rqt_kref;
+	struct kref pbl_kref;
 };
 
 static inline int c4iw_fatal_error(struct c4iw_rdev *rdev)
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -260,12 +260,22 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev
 		rdev->stats.pbl.cur += roundup(size, 1 << MIN_PBL_SHIFT);
 		if (rdev->stats.pbl.cur > rdev->stats.pbl.max)
 			rdev->stats.pbl.max = rdev->stats.pbl.cur;
+		kref_get(&rdev->pbl_kref);
 	} else
 		rdev->stats.pbl.fail++;
 	mutex_unlock(&rdev->stats.lock);
 	return (u32)addr;
 }
 
+static void destroy_pblpool(struct kref *kref)
+{
+	struct c4iw_rdev *rdev;
+
+	rdev = container_of(kref, struct c4iw_rdev, pbl_kref);
+	gen_pool_destroy(rdev->pbl_pool);
+	complete(&rdev->pbl_compl);
+}
+
 void c4iw_pblpool_free(struct c4iw_rdev *rdev, u32 addr, int size)
 {
 	pr_debug("%s addr 0x%x size %d\n", __func__, addr, size);
@@ -273,6 +283,7 @@ void c4iw_pblpool_free(struct c4iw_rdev
 	rdev->stats.pbl.cur -= roundup(size, 1 << MIN_PBL_SHIFT);
 	mutex_unlock(&rdev->stats.lock);
 	gen_pool_free(rdev->pbl_pool, (unsigned long)addr, size);
+	kref_put(&rdev->pbl_kref, destroy_pblpool);
 }
 
 int c4iw_pblpool_create(struct c4iw_rdev *rdev)
@@ -310,7 +321,7 @@ int c4iw_pblpool_create(struct c4iw_rdev
 
 void c4iw_pblpool_destroy(struct c4iw_rdev *rdev)
 {
-	gen_pool_destroy(rdev->pbl_pool);
+	kref_put(&rdev->pbl_kref, destroy_pblpool);
 }
 
 /*
@@ -331,12 +342,22 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev
 		rdev->stats.rqt.cur += roundup(size << 6, 1 << MIN_RQT_SHIFT);
 		if (rdev->stats.rqt.cur > rdev->stats.rqt.max)
 			rdev->stats.rqt.max = rdev->stats.rqt.cur;
+		kref_get(&rdev->rqt_kref);
 	} else
 		rdev->stats.rqt.fail++;
 	mutex_unlock(&rdev->stats.lock);
 	return (u32)addr;
 }
 
+static void destroy_rqtpool(struct kref *kref)
+{
+	struct c4iw_rdev *rdev;
+
+	rdev = container_of(kref, struct c4iw_rdev, rqt_kref);
+	gen_pool_destroy(rdev->rqt_pool);
+	complete(&rdev->rqt_compl);
+}
+
 void c4iw_rqtpool_free(struct c4iw_rdev *rdev, u32 addr, int size)
 {
 	pr_debug("%s addr 0x%x size %d\n", __func__, addr, size << 6);
@@ -344,6 +365,7 @@ void c4iw_rqtpool_free(struct c4iw_rdev
 	rdev->stats.rqt.cur -= roundup(size << 6, 1 << MIN_RQT_SHIFT);
 	mutex_unlock(&rdev->stats.lock);
 	gen_pool_free(rdev->rqt_pool, (unsigned long)addr, size << 6);
+	kref_put(&rdev->rqt_kref, destroy_rqtpool);
 }
 
 int c4iw_rqtpool_create(struct c4iw_rdev *rdev)
@@ -380,7 +402,7 @@ int c4iw_rqtpool_create(struct c4iw_rdev
 
 void c4iw_rqtpool_destroy(struct c4iw_rdev *rdev)
 {
-	gen_pool_destroy(rdev->rqt_pool);
+	kref_put(&rdev->rqt_kref, destroy_rqtpool);
 }
 
 /*

[PATCH 4.14 21/43] RDMA/ucma: Allow resolving address w/o specifying source address

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 09abfe7b5b2f442a85f4c4d59ecf582ad76088d7 upstream.

The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address().  Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command.  Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.

Fix this by explicitly allowing a zero address family for the source.

Fixes: 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/ucma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -678,7 +678,7 @@ static ssize_t ucma_resolve_ip(struct uc
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
-	if (!rdma_addr_size_in6(&cmd.src_addr) ||
+	if ((cmd.src_addr.sin6_family && !rdma_addr_size_in6(&cmd.src_addr)) ||
 	    !rdma_addr_size_in6(&cmd.dst_addr))
 		return -EINVAL;
 

[PATCH 4.14 22/43] RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

commit b4bd701ac469075d94ed9699a28755f2862252b9 upstream.

Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.

Ensure that rereg MR is only performed on a non-dead MR.

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/mr.c |   32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -833,25 +833,28 @@ static int mr_umem_get(struct ib_pd *pd,
 		       int *order)
 {
 	struct mlx5_ib_dev *dev = to_mdev(pd->device);
+	struct ib_umem *u;
 	int err;
 
-	*umem = ib_umem_get(pd->uobject->context, start, length,
-			    access_flags, 0);
-	err = PTR_ERR_OR_ZERO(*umem);
+	*umem = NULL;
+
+	u = ib_umem_get(pd->uobject->context, start, length, access_flags, 0);
+	err = PTR_ERR_OR_ZERO(u);
 	if (err) {
-		*umem = NULL;
-		mlx5_ib_err(dev, "umem get failed (%d)\n", err);
+		mlx5_ib_dbg(dev, "umem get failed (%d)\n", err);
 		return err;
 	}
 
-	mlx5_ib_cont_pages(*umem, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages,
+	mlx5_ib_cont_pages(u, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages,
 			   page_shift, ncont, order);
 	if (!*npages) {
 		mlx5_ib_warn(dev, "avoid zero region\n");
-		ib_umem_release(*umem);
+		ib_umem_release(u);
 		return -EINVAL;
 	}
 
+	*umem = u;
+
 	mlx5_ib_dbg(dev, "npages %d, ncont %d, order %d, page_shift %d\n",
 		    *npages, *ncont, *order, *page_shift);
 
@@ -1340,13 +1343,12 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 	int access_flags = flags & IB_MR_REREG_ACCESS ?
 			    new_access_flags :
 			    mr->access_flags;
-	u64 addr = (flags & IB_MR_REREG_TRANS) ? virt_addr : mr->umem->address;
-	u64 len = (flags & IB_MR_REREG_TRANS) ? length : mr->umem->length;
 	int page_shift = 0;
 	int upd_flags = 0;
 	int npages = 0;
 	int ncont = 0;
 	int order = 0;
+	u64 addr, len;
 	int err;
 
 	mlx5_ib_dbg(dev, "start 0x%llx, virt_addr 0x%llx, length 0x%llx, access_flags 0x%x\n",
@@ -1354,6 +1356,17 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 
 	atomic_sub(mr->npages, &dev->mdev->priv.reg_pages);
 
+	if (!mr->umem)
+		return -EINVAL;
+
+	if (flags & IB_MR_REREG_TRANS) {
+		addr = virt_addr;
+		len = length;
+	} else {
+		addr = mr->umem->address;
+		len = mr->umem->length;
+	}
+
 	if (flags != IB_MR_REREG_PD) {
 		/*
 		 * Replace umem. This needs to be done whether or not UMR is
@@ -1361,6 +1374,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *
 		 */
 		flags |= IB_MR_REREG_TRANS;
 		ib_umem_release(mr->umem);
+		mr->umem = NULL;
 		err = mr_umem_get(pd, addr, len, access_flags, &mr->umem,
 				  &npages, &page_shift, &ncont, &order);
 		if (err < 0) {

[PATCH 4.14 23/43] RDMA/mlx5: Protect from shift operand overflow

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

commit 002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream.

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -256,7 +256,11 @@ static int set_rq_size(struct mlx5_ib_de
 	} else {
 		if (ucmd) {
 			qp->rq.wqe_cnt = ucmd->rq_wqe_count;
+			if (ucmd->rq_wqe_shift > BITS_PER_BYTE * sizeof(ucmd->rq_wqe_shift))
+				return -EINVAL;
 			qp->rq.wqe_shift = ucmd->rq_wqe_shift;
+			if ((1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) < qp->wq_sig)
+				return -EINVAL;
 			qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) - qp->wq_sig;
 			qp->rq.max_post = qp->rq.wqe_cnt;
 		} else {

[PATCH 4.14 25/43] IB/mlx5: Use unlimited rate when static rate is not supported

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danit Goldberg <danitg@mellanox.com>

commit 4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream.

Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2199,18 +2199,18 @@ enum {
 
 static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8 rate)
 {
-	if (rate == IB_RATE_PORT_CURRENT) {
+	if (rate == IB_RATE_PORT_CURRENT)
 		return 0;
-	} else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+
+	if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS)
 		return -EINVAL;
-	} else {
-		while (rate != IB_RATE_2_5_GBPS &&
-		       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
-			 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
-			--rate;
-	}
 
-	return rate + MLX5_STAT_RATE_OFFSET;
+	while (rate != IB_RATE_PORT_CURRENT &&
+	       !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
+		 MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
+		--rate;
+
+	return rate ? rate + MLX5_STAT_RATE_OFFSET : rate;
 }
 
 static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev,

[PATCH 4.14 26/43] IB/hfi1: Fix handling of FECN marked multicast packet

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit f59fb9e05109b836230813e45f71c9ecc2d5dbe6 upstream.

The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet.  This is not correct
for multicast packets where the DLID is in the multicast range.

The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming.   The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.

A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys.  Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.

Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
  packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/driver.c |   19 +++++++++++++++----
 drivers/infiniband/hw/hfi1/hfi.h    |    8 ++++----
 drivers/infiniband/hw/hfi1/ud.c     |    4 ++--
 3 files changed, 21 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/hw/hfi1/driver.c
+++ b/drivers/infiniband/hw/hfi1/driver.c
@@ -437,31 +437,43 @@ void hfi1_process_ecn_slowpath(struct rv
 			       bool do_cnp)
 {
 	struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num);
+	struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
 	struct ib_other_headers *ohdr = pkt->ohdr;
 	struct ib_grh *grh = pkt->grh;
 	u32 rqpn = 0, bth1;
-	u16 pkey, rlid, dlid = ib_get_dlid(pkt->hdr);
+	u16 pkey;
+	u32 rlid, slid, dlid = 0;
 	u8 hdr_type, sc, svc_type;
 	bool is_mcast = false;
 
+	/* can be called from prescan */
 	if (pkt->etype == RHF_RCV_TYPE_BYPASS) {
 		is_mcast = hfi1_is_16B_mcast(dlid);
 		pkey = hfi1_16B_get_pkey(pkt->hdr);
 		sc = hfi1_16B_get_sc(pkt->hdr);
+		dlid = hfi1_16B_get_dlid(pkt->hdr);
+		slid = hfi1_16B_get_slid(pkt->hdr);
 		hdr_type = HFI1_PKT_TYPE_16B;
 	} else {
 		is_mcast = (dlid > be16_to_cpu(IB_MULTICAST_LID_BASE)) &&
 			   (dlid != be16_to_cpu(IB_LID_PERMISSIVE));
 		pkey = ib_bth_get_pkey(ohdr);
 		sc = hfi1_9B_get_sc5(pkt->hdr, pkt->rhf);
+		dlid = ib_get_dlid(pkt->hdr);
+		slid = ib_get_slid(pkt->hdr);
 		hdr_type = HFI1_PKT_TYPE_9B;
 	}
 
 	switch (qp->ibqp.qp_type) {
+	case IB_QPT_UD:
+		dlid = ppd->lid;
+		rlid = slid;
+		rqpn = ib_get_sqpn(pkt->ohdr);
+		svc_type = IB_CC_SVCTYPE_UD;
+		break;
 	case IB_QPT_SMI:
 	case IB_QPT_GSI:
-	case IB_QPT_UD:
-		rlid = ib_get_slid(pkt->hdr);
+		rlid = slid;
 		rqpn = ib_get_sqpn(pkt->ohdr);
 		svc_type = IB_CC_SVCTYPE_UD;
 		break;
@@ -486,7 +498,6 @@ void hfi1_process_ecn_slowpath(struct rv
 					      dlid, rlid, sc, grh);
 
 	if (!is_mcast && (bth1 & IB_BECN_SMASK)) {
-		struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
 		u32 lqpn = bth1 & RVT_QPN_MASK;
 		u8 sl = ibp->sc_to_sl[sc];
 
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -1523,13 +1523,13 @@ void set_link_ipg(struct hfi1_pportdata
 void process_becn(struct hfi1_pportdata *ppd, u8 sl, u32 rlid, u32 lqpn,
 		  u32 rqpn, u8 svc_type);
 void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn,
-		u32 pkey, u32 slid, u32 dlid, u8 sc5,
+		u16 pkey, u32 slid, u32 dlid, u8 sc5,
 		const struct ib_grh *old_grh);
 void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-		    u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+		    u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 		    u8 sc5, const struct ib_grh *old_grh);
 typedef void (*hfi1_handle_cnp)(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-				u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+				u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 				u8 sc5, const struct ib_grh *old_grh);
 
 /* We support only two types - 9B and 16B for now */
@@ -2431,7 +2431,7 @@ static inline void hfi1_make_16b_hdr(str
 		((slid >> OPA_16B_SLID_SHIFT) << OPA_16B_SLID_HIGH_SHIFT);
 	lrh2 = (lrh2 & ~OPA_16B_DLID_MASK) |
 		((dlid >> OPA_16B_DLID_SHIFT) << OPA_16B_DLID_HIGH_SHIFT);
-	lrh2 = (lrh2 & ~OPA_16B_PKEY_MASK) | (pkey << OPA_16B_PKEY_SHIFT);
+	lrh2 = (lrh2 & ~OPA_16B_PKEY_MASK) | ((u32)pkey << OPA_16B_PKEY_SHIFT);
 	lrh2 = (lrh2 & ~OPA_16B_L4_MASK) | l4;
 
 	hdr->lrh[0] = lrh0;
--- a/drivers/infiniband/hw/hfi1/ud.c
+++ b/drivers/infiniband/hw/hfi1/ud.c
@@ -630,7 +630,7 @@ int hfi1_lookup_pkey_idx(struct hfi1_ibp
 }
 
 void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,
-		    u32 remote_qpn, u32 pkey, u32 slid, u32 dlid,
+		    u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
 		    u8 sc5, const struct ib_grh *old_grh)
 {
 	u64 pbc, pbc_flags = 0;
@@ -688,7 +688,7 @@ void return_cnp_16B(struct hfi1_ibport *
 }
 
 void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn,
-		u32 pkey, u32 slid, u32 dlid, u8 sc5,
+		u16 pkey, u32 slid, u32 dlid, u8 sc5,
 		const struct ib_grh *old_grh)
 {
 	u64 pbc, pbc_flags = 0;

[PATCH 4.14 27/43] IB/hfi1: Fix loss of BECN with AHG

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit 0a0bcb046b2f0c15b89f8c1b08ad3de601a83c66 upstream.

AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).

When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.

Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor.  BECNs are not a normal case and this should not
hurt AHG optimizations.

Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/ruc.c |   50 +++++++++++++++++++++++++++++++--------
 1 file changed, 40 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/hw/hfi1/ruc.c
+++ b/drivers/infiniband/hw/hfi1/ruc.c
@@ -745,6 +745,20 @@ static inline void hfi1_make_ruc_bth(str
 	ohdr->bth[2] = cpu_to_be32(bth2);
 }
 
+/**
+ * hfi1_make_ruc_header_16B - build a 16B header
+ * @qp: the queue pair
+ * @ohdr: a pointer to the destination header memory
+ * @bth0: bth0 passed in from the RC/UC builder
+ * @bth2: bth2 passed in from the RC/UC builder
+ * @middle: non zero implies indicates ahg "could" be used
+ * @ps: the current packet state
+ *
+ * This routine may disarm ahg under these situations:
+ * - packet needs a GRH
+ * - BECN needed
+ * - migration state not IB_MIG_MIGRATED
+ */
 static inline void hfi1_make_ruc_header_16B(struct rvt_qp *qp,
 					    struct ib_other_headers *ohdr,
 					    u32 bth0, u32 bth2, int middle,
@@ -789,6 +803,12 @@ static inline void hfi1_make_ruc_header_
 	else
 		middle = 0;
 
+	if (qp->s_flags & RVT_S_ECN) {
+		qp->s_flags &= ~RVT_S_ECN;
+		/* we recently received a FECN, so return a BECN */
+		becn = true;
+		middle = 0;
+	}
 	if (middle)
 		build_ahg(qp, bth2);
 	else
@@ -796,11 +816,6 @@ static inline void hfi1_make_ruc_header_
 
 	bth0 |= pkey;
 	bth0 |= extra_bytes << 20;
-	if (qp->s_flags & RVT_S_ECN) {
-		qp->s_flags &= ~RVT_S_ECN;
-		/* we recently received a FECN, so return a BECN */
-		becn = 1;
-	}
 	hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2);
 
 	if (!ppd->lid)
@@ -818,6 +833,20 @@ static inline void hfi1_make_ruc_header_
 			  pkey, becn, 0, l4, priv->s_sc);
 }
 
+/**
+ * hfi1_make_ruc_header_9B - build a 9B header
+ * @qp: the queue pair
+ * @ohdr: a pointer to the destination header memory
+ * @bth0: bth0 passed in from the RC/UC builder
+ * @bth2: bth2 passed in from the RC/UC builder
+ * @middle: non zero implies indicates ahg "could" be used
+ * @ps: the current packet state
+ *
+ * This routine may disarm ahg under these situations:
+ * - packet needs a GRH
+ * - BECN needed
+ * - migration state not IB_MIG_MIGRATED
+ */
 static inline void hfi1_make_ruc_header_9B(struct rvt_qp *qp,
 					   struct ib_other_headers *ohdr,
 					   u32 bth0, u32 bth2, int middle,
@@ -853,6 +882,12 @@ static inline void hfi1_make_ruc_header_
 	else
 		middle = 0;
 
+	if (qp->s_flags & RVT_S_ECN) {
+		qp->s_flags &= ~RVT_S_ECN;
+		/* we recently received a FECN, so return a BECN */
+		bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT);
+		middle = 0;
+	}
 	if (middle)
 		build_ahg(qp, bth2);
 	else
@@ -860,11 +895,6 @@ static inline void hfi1_make_ruc_header_
 
 	bth0 |= pkey;
 	bth0 |= extra_bytes << 20;
-	if (qp->s_flags & RVT_S_ECN) {
-		qp->s_flags &= ~RVT_S_ECN;
-		/* we recently received a FECN, so return a BECN */
-		bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT);
-	}
 	hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2);
 
 	if (!ppd->lid)

[PATCH 4.14 28/43] IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Sanchez <sebastian.sanchez@intel.com>

commit 45d924571a5e1329580811f2419da61b07ac3613 upstream.

When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.

Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.

BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
 dev_err+0x6c/0x90
 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
 hfi1_init_dd+0xdd/0x2530 [hfi1]
 ? pci_conf1_read+0xb2/0xf0
 ? pci_read_config_word.part.9+0x64/0x80
 ? pci_conf1_write+0xb0/0xf0
 ? pcie_capability_clear_and_set_word+0x57/0x80
 init_one+0x141/0x490 [hfi1]
 local_pci_probe+0x3f/0xa0
 work_for_cpu_fn+0x10/0x20
 process_one_work+0x152/0x350
 worker_thread+0x1cf/0x3e0
 kthread+0xf5/0x130
 ? max_active_store+0x80/0x80
 ? kthread_bind+0x10/0x10
 ? do_syscall_64+0x6e/0x1a0
 ? SyS_exit_group+0x10/0x10
 ret_from_fork+0x35/0x40

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/init.c |    2 ++
 drivers/infiniband/hw/hfi1/pcie.c |    3 ---
 2 files changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -1234,6 +1234,8 @@ struct hfi1_devdata *hfi1_alloc_devdata(
 		return ERR_PTR(-ENOMEM);
 	dd->num_pports = nports;
 	dd->pport = (struct hfi1_pportdata *)(dd + 1);
+	dd->pcidev = pdev;
+	pci_set_drvdata(pdev, dd);
 
 	INIT_LIST_HEAD(&dd->list);
 	idr_preload(GFP_KERNEL);
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -163,9 +163,6 @@ int hfi1_pcie_ddinit(struct hfi1_devdata
 	resource_size_t addr;
 	int ret = 0;
 
-	dd->pcidev = pdev;
-	pci_set_drvdata(pdev, dd);
-
 	addr = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
 

[PATCH 4.14 29/43] iw_cxgb4: Atomically flush per QP HW CQEs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bharat Potnuri <bharat@chelsio.com>

commit 2df19e19ae90d94fd8724083f161f368a2797537 upstream.

When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire
corresponding QP lock before moving the CQEs into its corresponding SW
queue and accessing the SQ contents for completing a WR.
Ignore CQEs if corresponding QP is already flushed.

Cc: stable@vger.kernel.org
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/cxgb4/cq.c       |   11 ++++++++++-
 drivers/infiniband/hw/cxgb4/iw_cxgb4.h |    2 +-
 drivers/infiniband/hw/cxgb4/qp.c       |    4 ++--
 3 files changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -330,7 +330,7 @@ static void advance_oldest_read(struct t
  * Deal with out-of-order and/or completions that complete
  * prior unsignalled WRs.
  */
-void c4iw_flush_hw_cq(struct c4iw_cq *chp)
+void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp)
 {
 	struct t4_cqe *hw_cqe, *swcqe, read_cqe;
 	struct c4iw_qp *qhp;
@@ -354,6 +354,13 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch
 		if (qhp == NULL)
 			goto next_cqe;
 
+		if (flush_qhp != qhp) {
+			spin_lock(&qhp->lock);
+
+			if (qhp->wq.flushed == 1)
+				goto next_cqe;
+		}
+
 		if (CQE_OPCODE(hw_cqe) == FW_RI_TERMINATE)
 			goto next_cqe;
 
@@ -405,6 +412,8 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch
 next_cqe:
 		t4_hwcq_consume(&chp->cq);
 		ret = t4_next_hw_cqe(&chp->cq, &hw_cqe);
+		if (qhp && flush_qhp != qhp)
+			spin_unlock(&qhp->lock);
 	}
 }
 
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -993,7 +993,7 @@ void c4iw_pblpool_free(struct c4iw_rdev
 u32 c4iw_ocqp_pool_alloc(struct c4iw_rdev *rdev, int size);
 void c4iw_ocqp_pool_free(struct c4iw_rdev *rdev, u32 addr, int size);
 int c4iw_ofld_send(struct c4iw_rdev *rdev, struct sk_buff *skb);
-void c4iw_flush_hw_cq(struct c4iw_cq *chp);
+void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp);
 void c4iw_count_rcqes(struct t4_cq *cq, struct t4_wq *wq, int *count);
 int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp);
 int c4iw_flush_rq(struct t4_wq *wq, struct t4_cq *cq, int count);
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -1349,12 +1349,12 @@ static void __flush_qp(struct c4iw_qp *q
 	qhp->wq.flushed = 1;
 	t4_set_wq_in_error(&qhp->wq);
 
-	c4iw_flush_hw_cq(rchp);
+	c4iw_flush_hw_cq(rchp, qhp);
 	c4iw_count_rcqes(&rchp->cq, &qhp->wq, &count);
 	rq_flushed = c4iw_flush_rq(&qhp->wq, &rchp->cq, count);
 
 	if (schp != rchp)
-		c4iw_flush_hw_cq(schp);
+		c4iw_flush_hw_cq(schp, qhp);
 	sq_flushed = c4iw_flush_sq(qhp);
 
 	spin_unlock(&qhp->lock);

[PATCH 4.14 30/43] drm/vmwgfx: Fix a buffer object leak

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream.

A buffer object leak was introduced when fixing a premature buffer
object release. Fix this.

Cc: <stable@vger.kernel.org>
Fixes: 73a88250b709 ("Fix a destoy-while-held mutex problem.")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -2612,6 +2612,7 @@ void vmw_kms_helper_resource_finish(stru
 		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, ctx->buf,
 					     out_fence, NULL);
 
+	vmw_dmabuf_unreference(&ctx->buf);
 	vmw_resource_unreserve(res, false, NULL, 0);
 	mutex_unlock(&res->dev_priv->cmdbuf_mutex);
 }

[PATCH 4.14 31/43] drm/bridge: vga-dac: Fix edid memory leak

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Paul <seanpaul@chromium.org>

commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream.

edid should be freed once it's finished being used.

Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support")
Cc: Rob Herring <robh@kernel.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/bridge/dumb-vga-dac.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -55,7 +55,9 @@ static int dumb_vga_get_modes(struct drm
 	}
 
 	drm_mode_connector_update_edid_property(connector, edid);
-	return drm_add_edid_modes(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+	return ret;
 
 fallback:
 	/*

[PATCH 4.14 32/43] test_firmware: fix setting old custom fw path back on exit, second try

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@codethink.co.uk>

commit e538409257d0217a9bc715686100a5328db75a15 upstream.

Commit 65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter.  This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.

Instead, write a null byte.

Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Fixes: 65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 tools/testing/selftests/firmware/fw_filesystem.sh |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -46,9 +46,11 @@ test_finish()
 		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
 	fi
 	if [ "$OLD_FWPATH" = "" ]; then
-		OLD_FWPATH=" "
+		# A zero-length write won't work; write a null byte
+		printf '\000' >/sys/module/firmware_class/parameters/path
+	else
+		echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	fi
-	echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
 	rm -f "$FW"
 	rmdir "$FWPATH"
 }

[PATCH 4.14 33/43] errseq: Always report a writeback error once

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <willy@infradead.org>

commit b4678df184b314a2bd47d2329feca2c2534aa12b upstream.

The errseq_t infrastructure assumes that errors which occurred before
the file descriptor was opened are of no interest to the application.
This turns out to be a regression for some applications, notably Postgres.

Before errseq_t, a writeback error would be reported exactly once (as
long as the inode remained in memory), so Postgres could open a file,
call fsync() and find out whether there had been a writeback error on
that file from another process.

This patch changes the errseq infrastructure to report errors to all
file descriptors which are opened after the error occurred, but before
it was reported to any file descriptor.  This restores the user-visible
behaviour.

Cc: stable@vger.kernel.org
Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/errseq.c |   25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

--- a/lib/errseq.c
+++ b/lib/errseq.c
@@ -111,25 +111,22 @@ EXPORT_SYMBOL(errseq_set);
  * errseq_sample - grab current errseq_t value
  * @eseq: pointer to errseq_t to be sampled
  *
- * This function allows callers to sample an errseq_t value, marking it as
- * "seen" if required.
+ * This function allows callers to initialise their errseq_t variable.
+ * If the error has been "seen", new callers will not see an old error.
+ * If there is an unseen error in @eseq, the caller of this function will
+ * see it the next time it checks for an error.
+ *
+ * Context: Any context.
+ * Return: The current errseq value.
  */
 errseq_t errseq_sample(errseq_t *eseq)
 {
 	errseq_t old = READ_ONCE(*eseq);
-	errseq_t new = old;
 
-	/*
-	 * For the common case of no errors ever having been set, we can skip
-	 * marking the SEEN bit. Once an error has been set, the value will
-	 * never go back to zero.
-	 */
-	if (old != 0) {
-		new |= ERRSEQ_SEEN;
-		if (old != new)
-			cmpxchg(eseq, old, new);
-	}
-	return new;
+	/* If nobody has seen this error yet, then we can be the first. */
+	if (!(old & ERRSEQ_SEEN))
+		old = 0;
+	return old;
 }
 EXPORT_SYMBOL(errseq_sample);
 

[PATCH 4.14 34/43] USB: serial: visor: handle potential invalid device configuration

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.

If we get an invalid device configuration from a palm 3 type device, we
might incorrectly parse things, and we have the potential to crash in
"interesting" ways.

Fix this up by verifying the size of the configuration passed to us by
the device, and only if it is correct, will we handle it.

Note that this also fixes an information leak of slab data.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: add comment about the info leak ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/visor.c |   69 ++++++++++++++++++++++-----------------------
 1 file changed, 35 insertions(+), 34 deletions(-)

--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -338,47 +338,48 @@ static int palm_os_3_probe(struct usb_se
 		goto exit;
 	}
 
-	if (retval == sizeof(*connection_info)) {
-			connection_info = (struct visor_connection_info *)
-							transfer_buffer;
-
-		num_ports = le16_to_cpu(connection_info->num_ports);
-		for (i = 0; i < num_ports; ++i) {
-			switch (
-			   connection_info->connections[i].port_function_id) {
-			case VISOR_FUNCTION_GENERIC:
-				string = "Generic";
-				break;
-			case VISOR_FUNCTION_DEBUGGER:
-				string = "Debugger";
-				break;
-			case VISOR_FUNCTION_HOTSYNC:
-				string = "HotSync";
-				break;
-			case VISOR_FUNCTION_CONSOLE:
-				string = "Console";
-				break;
-			case VISOR_FUNCTION_REMOTE_FILE_SYS:
-				string = "Remote File System";
-				break;
-			default:
-				string = "unknown";
-				break;
-			}
-			dev_info(dev, "%s: port %d, is for %s use\n",
-				serial->type->description,
-				connection_info->connections[i].port, string);
-		}
+	if (retval != sizeof(*connection_info)) {
+		dev_err(dev, "Invalid connection information received from device\n");
+		retval = -ENODEV;
+		goto exit;
 	}
-	/*
-	* Handle devices that report invalid stuff here.
-	*/
+
+	connection_info = (struct visor_connection_info *)transfer_buffer;
+
+	num_ports = le16_to_cpu(connection_info->num_ports);
+
+	/* Handle devices that report invalid stuff here. */
 	if (num_ports == 0 || num_ports > 2) {
 		dev_warn(dev, "%s: No valid connect info available\n",
 			serial->type->description);
 		num_ports = 2;
 	}
 
+	for (i = 0; i < num_ports; ++i) {
+		switch (connection_info->connections[i].port_function_id) {
+		case VISOR_FUNCTION_GENERIC:
+			string = "Generic";
+			break;
+		case VISOR_FUNCTION_DEBUGGER:
+			string = "Debugger";
+			break;
+		case VISOR_FUNCTION_HOTSYNC:
+			string = "HotSync";
+			break;
+		case VISOR_FUNCTION_CONSOLE:
+			string = "Console";
+			break;
+		case VISOR_FUNCTION_REMOTE_FILE_SYS:
+			string = "Remote File System";
+			break;
+		default:
+			string = "unknown";
+			break;
+		}
+		dev_info(dev, "%s: port %d, is for %s use\n",
+			serial->type->description,
+			connection_info->connections[i].port, string);
+	}
 	dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
 		num_ports);
 

[PATCH 4.14 35/43] usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mayank Rana <mrana@codeaurora.org>

commit 96bd39df29c29d348d65311e5954c0b7d3a2a790 upstream.

dwc3_ep_dequeue() waits for completion of End Transfer command using
wait_event_lock_irq(), which will release the dwc3->lock while waiting
and reacquire after completion. This allows a potential race condition
with ep_disable() which also removes all requests from started_list
and pending_list.

The check for NULL r->trb should catch this but currently it exits to
the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its
list entry was already removed, if CONFIG_DEBUG_LIST is enabled a
'list_del corruption' bug is thrown since its next/prev pointers are
already LIST_POISON1/2. If r->trb is NULL it should simply exit to
'out0'.

Fixes: cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1444,7 +1444,7 @@ static int dwc3_gadget_ep_dequeue(struct
 					dwc->lock);
 
 			if (!r->trb)
-				goto out1;
+				goto out0;
 
 			if (r->num_pending_sgs) {
 				struct dwc3_trb *trb;

[PATCH 4.14 36/43] USB: Accept bulk endpoints with 1024-byte maxpacket

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit fb5ee84ea72c5f1b6cabdd1c9d6e8648995ca7c6 upstream.

Some non-compliant high-speed USB devices have bulk endpoints with a
1024-byte maxpacket size.  Although such endpoints don't work with
xHCI host controllers, they do work with EHCI controllers.  We used to
accept these invalid sizes (with a warning), but we no longer do
because of an unintentional change introduced by commit aed9d65ac327
("USB: validate wMaxPacketValue entries in endpoint descriptors").

This patch restores the old behavior, so that people with these
peculiar devices can use them without patching their kernels by hand.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Elvinas <elvinas@veikia.lt>
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -191,7 +191,9 @@ static const unsigned short full_speed_m
 static const unsigned short high_speed_maxpacket_maxes[4] = {
 	[USB_ENDPOINT_XFER_CONTROL] = 64,
 	[USB_ENDPOINT_XFER_ISOC] = 1024,
-	[USB_ENDPOINT_XFER_BULK] = 512,
+
+	/* Bulk should be 512, but some devices use 1024: we will warn below */
+	[USB_ENDPOINT_XFER_BULK] = 1024,
 	[USB_ENDPOINT_XFER_INT] = 1024,
 };
 static const unsigned short super_speed_maxpacket_maxes[4] = {

[PATCH 4.14 37/43] USB: serial: option: reimplement interface masking

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.

Reimplement interface masking using device flags stored directly in the
device-id table. This will make it easier to add and maintain device-id
entries by using a more compact and readable notation compared to the
current implementation (which manages pairs of masks in separate
blacklist structs).

Two convenience macros are used to flag an interface as either reserved
or as not supporting modem-control requests:

	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
	  .driver_info = NCTRL(0) | RSVD(3) },

For now, we limit the highest maskable interface number to seven, which
allows for (up to 16) additional device flags to be added later should
need arise.

Note that this will likely need to be backported to stable in order to
make future device-id backports more manageable.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |  446 ++++++++++++++------------------------------
 1 file changed, 152 insertions(+), 294 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -551,151 +551,15 @@ static void option_instat_callback(struc
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
-struct option_blacklist_info {
-	/* bitmask of interface numbers blacklisted for send_setup */
-	const unsigned long sendsetup;
-	/* bitmask of interface numbers that are reserved */
-	const unsigned long reserved;
-};
-
-static const struct option_blacklist_info four_g_w14_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info four_g_w100_blacklist = {
-	.sendsetup = BIT(1) | BIT(2),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info alcatel_x200_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_0037_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-};
-
-static const struct option_blacklist_info zte_k3765_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info zte_mc2718_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
-static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
-	.reserved = BIT(2) | BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info zte_me3620_xl_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info zte_zm8620_x_blacklist = {
-	.reserved = BIT(3) | BIT(4) | BIT(5),
-};
-
-static const struct option_blacklist_info huawei_cdc12_blacklist = {
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info net_intf0_blacklist = {
-	.reserved = BIT(0),
-};
-
-static const struct option_blacklist_info net_intf1_blacklist = {
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info net_intf2_blacklist = {
-	.reserved = BIT(2),
-};
-
-static const struct option_blacklist_info net_intf3_blacklist = {
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info net_intf4_blacklist = {
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info net_intf5_blacklist = {
-	.reserved = BIT(5),
-};
-
-static const struct option_blacklist_info net_intf6_blacklist = {
-	.reserved = BIT(6),
-};
-
-static const struct option_blacklist_info zte_mf626_blacklist = {
-	.sendsetup = BIT(0) | BIT(1),
-	.reserved = BIT(4),
-};
-
-static const struct option_blacklist_info zte_1255_blacklist = {
-	.reserved = BIT(3) | BIT(4),
-};
-
-static const struct option_blacklist_info simcom_sim7100e_blacklist = {
-	.reserved = BIT(5) | BIT(6),
-};
-
-static const struct option_blacklist_info telit_me910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(3),
-};
-
-static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(3),
-};
-
-static const struct option_blacklist_info telit_le910_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2),
-};
-
-static const struct option_blacklist_info telit_le920_blacklist = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(5),
-};
-
-static const struct option_blacklist_info telit_le920a4_blacklist_1 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1),
-};
-
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
-	.sendsetup = BIT(2),
-	.reserved = BIT(0) | BIT(1) | BIT(3),
-};
 
-static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
-	.sendsetup = BIT(0),
-	.reserved = BIT(1) | BIT(2) | BIT(3),
-};
+/* Device flags */
 
-static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
+/* Interface does not support modem-control requests */
+#define NCTRL(ifnum)	((BIT(ifnum) & 0xff) << 8)
 
-static const struct option_blacklist_info yuga_clm920_nc5_blacklist = {
-	.reserved = BIT(1) | BIT(4),
-};
+/* Interface is reserved */
+#define RSVD(ifnum)	((BIT(ifnum) & 0xff) << 0)
 
-static const struct option_blacklist_info quectel_ep06_blacklist = {
-	.reserved = BIT(4) | BIT(5),
-};
 
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -729,26 +593,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
-		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	  .driver_info = RSVD(1) | RSVD(2) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) },
@@ -1193,67 +1057,67 @@ static const struct usb_device_id option
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	/* Quectel products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	/* Yuga products use Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5),
-	  .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist },
+	  .driver_info = RSVD(1) | RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06),
-	  .driver_info = (kernel_ulong_t)&quectel_ep06_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
-	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
@@ -1261,38 +1125,38 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
-		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
-		.driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
-		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
-		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(5) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212),
-		.driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 },
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
-		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
@@ -1308,58 +1172,58 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&zte_0037_blacklist },
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
@@ -1384,26 +1248,26 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
@@ -1419,50 +1283,50 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
-	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1579,23 +1443,23 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+	  .driver_info = RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
@@ -1610,7 +1474,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
@@ -1646,17 +1510,17 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
-		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1674,8 +1538,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff),
+	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
@@ -1686,20 +1550,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	  .driver_info = RSVD(1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
@@ -1851,19 +1715,19 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) | NCTRL(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	 .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	 .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	 .driver_info = RSVD(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
-	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
-	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
+	 .driver_info = RSVD(3) | RSVD(4) | RSVD(5) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
@@ -1883,37 +1747,34 @@ static const struct usb_device_id option
 	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
-	  .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
+	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
-	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
-	},
+	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
-	  .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
-	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
-	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	  .driver_info = RSVD(2) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
-  	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
-  	},
+	  .driver_info = NCTRL(0) | NCTRL(1) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
-	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
-	},
+	  .driver_info = NCTRL(1) | NCTRL(2) | RSVD(3) },
 	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
-	 .driver_info = (kernel_ulong_t)&net_intf3_blacklist},
+	 .driver_info = RSVD(3)},
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
@@ -1939,14 +1800,14 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
-		.driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
@@ -1956,20 +1817,20 @@ static const struct usb_device_id option
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	  .driver_info = RSVD(6) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
-		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
@@ -2046,9 +1907,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) },			/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
@@ -2056,9 +1917,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },			/* D-Link DWM-158 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) },			/* D-Link DWM-157 C1 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),			/* D-Link DWM-221 B1 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
-	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
@@ -2118,7 +1979,7 @@ static int option_probe(struct usb_seria
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
 	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
-	const struct option_blacklist_info *blacklist;
+	unsigned long device_flags = id->driver_info;
 
 	/* Never bind to the CD-Rom emulation interface	*/
 	if (iface_desc->bInterfaceClass == 0x08)
@@ -2129,9 +1990,7 @@ static int option_probe(struct usb_seria
 	 * the same class/subclass/protocol as the serial interfaces.  Look at
 	 * the Windows driver .INF files for reserved interface numbers.
 	 */
-	blacklist = (void *)id->driver_info;
-	if (blacklist && test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->reserved))
+	if (device_flags & RSVD(iface_desc->bInterfaceNumber))
 		return -ENODEV;
 	/*
 	 * Don't bind network interface on Samsung GT-B3730, it is handled by
@@ -2142,8 +2001,8 @@ static int option_probe(struct usb_seria
 	    iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
 		return -ENODEV;
 
-	/* Store the blacklist info so we can use it during attach. */
-	usb_set_serial_data(serial, (void *)blacklist);
+	/* Store the device flags so we can use them during attach. */
+	usb_set_serial_data(serial, (void *)device_flags);
 
 	return 0;
 }
@@ -2151,22 +2010,21 @@ static int option_probe(struct usb_seria
 static int option_attach(struct usb_serial *serial)
 {
 	struct usb_interface_descriptor *iface_desc;
-	const struct option_blacklist_info *blacklist;
 	struct usb_wwan_intf_private *data;
+	unsigned long device_flags;
 
 	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	/* Retrieve blacklist info stored at probe. */
-	blacklist = usb_get_serial_data(serial);
+	/* Retrieve device flags stored at probe. */
+	device_flags = (unsigned long)usb_get_serial_data(serial);
 
 	iface_desc = &serial->interface->cur_altsetting->desc;
 
-	if (!blacklist || !test_bit(iface_desc->bInterfaceNumber,
-						&blacklist->sendsetup)) {
+	if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
 		data->use_send_setup = 1;
-	}
+
 	spin_lock_init(&data->susp_lock);
 
 	usb_set_serial_data(serial, data);

[PATCH 4.14 39/43] usb: musb: host: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Liu <b-liu@ti.com>

commit 2b63f1329df2cd814c1f8353fae4853ace6521d1 upstream.

musb_start_urb() doesn't check the pass-in parameter if it is NULL.  But
in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is
returned from first_qh(), which could be NULL.

So wrap the musb_start_urb() call here with a if condition check to
avoid the potential NULL pointer dereference.

Fixes: f283862f3b5c ("usb: musb: NAK timeout scheme on bulk TX endpoint")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_host.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1023,7 +1023,9 @@ static void musb_bulk_nak_timeout(struct
 			/* set tx_reinit and schedule the next qh */
 			ep->tx_reinit = 1;
 		}
-		musb_start_urb(musb, is_in, next_qh);
+
+		if (next_qh)
+			musb_start_urb(musb, is_in, next_qh);
 	}
 }
 

[PATCH 4.14 40/43] usb: musb: trace: fix NULL pointer dereference in musb_g_tx()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Liu <b-liu@ti.com>

commit 9aea9b6cc78d2b99b23d84fb2e0bc6e464c6569e upstream.

The usb_request pointer could be NULL in musb_g_tx(), where the
tracepoint call would trigger the NULL pointer dereference failure when
parsing the members of the usb_request pointer.

Move the tracepoint call to where the usb_request pointer is already
checked to solve the issue.

Fixes: fc78003e5345 ("usb: musb: gadget: add usb-request tracepoints")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_gadget.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -442,7 +442,6 @@ void musb_g_tx(struct musb *musb, u8 epn
 	req = next_request(musb_ep);
 	request = &req->request;
 
-	trace_musb_req_tx(req);
 	csr = musb_readw(epio, MUSB_TXCSR);
 	musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr);
 
@@ -481,6 +480,8 @@ void musb_g_tx(struct musb *musb, u8 epn
 		u8	is_dma = 0;
 		bool	short_packet = false;
 
+		trace_musb_req_tx(req);
+
 		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;

[PATCH 4.14 42/43] irqchip/qcom: Fix check for spurious interrupts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Agustin Vega-Frias <agustinv@codeaurora.org>

commit 1bc2463cee92ef0e2034c813d5e511adeb58b5fd upstream.

When the interrupts for a combiner span multiple registers it must be
checked if any interrupts have been asserted on each register before
checking for spurious interrupts.

Checking each register seperately leads to false positive warnings.

[ tglx: Massaged changelog ]

Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: timur@codeaurora.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1525184090-26143-1-git-send-email-agustinv@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/qcom-irq-combiner.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/qcom-irq-combiner.c
+++ b/drivers/irqchip/qcom-irq-combiner.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -68,7 +68,7 @@ static void combiner_handle_irq(struct i
 
 		bit = readl_relaxed(combiner->regs[reg].addr);
 		status = bit & combiner->regs[reg].enabled;
-		if (!status)
+		if (bit && !status)
 			pr_warn_ratelimited("Unexpected IRQ on CPU%d: (%08x %08lx %p)\n",
 					    smp_processor_id(), bit,
 					    combiner->regs[reg].enabled,

[PATCH 4.14 43/43] tracing: Fix bad use of igrab in trace_uprobe.c

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Song Liu <songliubraving@fb.com>

commit 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e upstream.

As Miklos reported and suggested:

  This pattern repeats two times in trace_uprobe.c and in
  kernel/events/core.c as well:

      ret = kern_path(filename, LOOKUP_FOLLOW, &path);
      if (ret)
          goto fail_address_parse;

      inode = igrab(d_inode(path.dentry));
      path_put(&path);

  And it's wrong.  You can only hold a reference to the inode if you
  have an active ref to the superblock as well (which is normally
  through path.mnt) or holding s_umount.

  This way unmounting the containing filesystem while the tracepoint is
  active will give you the "VFS: Busy inodes after unmount..." message
  and a crash when the inode is finally put.

  Solution: store path instead of inode.

This patch fixes two instances in trace_uprobe.c. struct path is added to
struct trace_uprobe to keep the inode and containing mount point
referenced.

Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com

Fixes: f3f096cfedf8 ("tracing: Provide trace events interface for uprobes")
Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU")
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_uprobe.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -55,6 +55,7 @@ struct trace_uprobe {
 	struct list_head		list;
 	struct trace_uprobe_filter	filter;
 	struct uprobe_consumer		consumer;
+	struct path			path;
 	struct inode			*inode;
 	char				*filename;
 	unsigned long			offset;
@@ -287,7 +288,7 @@ static void free_trace_uprobe(struct tra
 	for (i = 0; i < tu->tp.nr_args; i++)
 		traceprobe_free_probe_arg(&tu->tp.args[i]);
 
-	iput(tu->inode);
+	path_put(&tu->path);
 	kfree(tu->tp.call.class->system);
 	kfree(tu->tp.call.name);
 	kfree(tu->filename);
@@ -361,7 +362,6 @@ end:
 static int create_trace_uprobe(int argc, char **argv)
 {
 	struct trace_uprobe *tu;
-	struct inode *inode;
 	char *arg, *event, *group, *filename;
 	char buf[MAX_EVENT_NAME_LEN];
 	struct path path;
@@ -369,7 +369,6 @@ static int create_trace_uprobe(int argc,
 	bool is_delete, is_return;
 	int i, ret;
 
-	inode = NULL;
 	ret = 0;
 	is_delete = false;
 	is_return = false;
@@ -435,21 +434,16 @@ static int create_trace_uprobe(int argc,
 	}
 	/* Find the last occurrence, in case the path contains ':' too. */
 	arg = strrchr(argv[1], ':');
-	if (!arg) {
-		ret = -EINVAL;
-		goto fail_address_parse;
-	}
+	if (!arg)
+		return -EINVAL;
 
 	*arg++ = '\0';
 	filename = argv[1];
 	ret = kern_path(filename, LOOKUP_FOLLOW, &path);
 	if (ret)
-		goto fail_address_parse;
-
-	inode = igrab(d_inode(path.dentry));
-	path_put(&path);
+		return ret;
 
-	if (!inode || !S_ISREG(inode->i_mode)) {
+	if (!d_is_reg(path.dentry)) {
 		ret = -EINVAL;
 		goto fail_address_parse;
 	}
@@ -488,7 +482,7 @@ static int create_trace_uprobe(int argc,
 		goto fail_address_parse;
 	}
 	tu->offset = offset;
-	tu->inode = inode;
+	tu->path = path;
 	tu->filename = kstrdup(filename, GFP_KERNEL);
 
 	if (!tu->filename) {
@@ -556,7 +550,7 @@ error:
 	return ret;
 
 fail_address_parse:
-	iput(inode);
+	path_put(&path);
 
 	pr_info("Failed to parse address or file.\n");
 
@@ -935,6 +929,7 @@ probe_event_enable(struct trace_uprobe *
 		goto err_flags;
 
 	tu->consumer.filter = filter;
+	tu->inode = d_real_inode(tu->path.dentry);
 	ret = uprobe_register(tu->inode, tu->offset, &tu->consumer);
 	if (ret)
 		goto err_buffer;
@@ -980,6 +975,7 @@ probe_event_disable(struct trace_uprobe
 	WARN_ON(!uprobe_filter_is_empty(&tu->filter));
 
 	uprobe_unregister(tu->inode, tu->offset, &tu->consumer);
+	tu->inode = NULL;
 	tu->tp.flags &= file ? ~TP_FLAG_TRACE : ~TP_FLAG_PROFILE;
 
 	uprobe_buffer_disable();

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Guenter Roeck]

On Tue, May 08, 2018 at 10:10:19AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.40 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu May 10 07:39:32 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 146 pass: 146 fail: 0
Qemu test results:
	total: 141 pass: 141 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Naresh Kamboju]

On 8 May 2018 at 13:40, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.14.40 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu May 10 07:39:32 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.99-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 6e28bacfe4aa523ece3838a9d50e7612d41be723
git describe: v4.9.98-33-g6e28bacfe4aa
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.98-33-g6e28bacfe4aa


No regressions (compared to build v4.9.98-8-g5918d4b6b7ff)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c
* boot - pass: 20
* kselftest - skip: 32, pass: 34
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 135, pass: 1015
* ltp-timers-tests - pass: 13

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 29, pass: 36
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 136, pass: 1014
* ltp-timers-tests - pass: 13

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 29, pass: 37
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 135, pass: 1015
* ltp-timers-tests - pass: 13

qemu_arm
* boot - fail: 12, pass: 8
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-ipc-tests - pass: 9
* ltp-pty-tests - pass: 4
* ltp-syscalls-tests - skip: 92, fail: 3, pass: 1055

qemu_arm64
* boot - pass: 20
* kselftest - skip: 33, pass: 35
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 6, pass: 8
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 157, fail: 2, pass: 991
* ltp-timers-tests - pass: 13

qemu_x86_64
* boot - pass: 22
* kselftest - skip: 33, pass: 47
* kselftest-vsyscall-mode-native - skip: 33, pass: 47
* kselftest-vsyscall-mode-none - skip: 33, pass: 47
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 152, pass: 998
* ltp-timers-tests - pass: 13

x15 - arm
* boot - pass: 20
* kselftest - skip: 29, pass: 36
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 75, pass: 1075
* ltp-timers-tests - pass: 13

x86_64
* boot - pass: 22
* kselftest - skip: 30, pass: 50
* kselftest-vsyscall-mode-native - skip: 30, fail: 1, pass: 49
* kselftest-vsyscall-mode-none - skip: 30, pass: 50
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 1
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 116, pass: 1034
* ltp-timers-tests - pass: 13

-- 
Linaro QA (BETA)
https://qa-reports.linaro.org

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Naresh Kamboju]

On 8 May 2018 at 23:41, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> On 8 May 2018 at 13:40, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>> This is the start of the stable review cycle for the 4.14.40 release.
>> There are 43 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu May 10 07:39:32 UTC 2018.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
>> or in the git tree and branch at:
>>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h

Please ignore 4.9 results summary in this thread.

- Naresh

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Naresh Kamboju]

On 8 May 2018 at 13:40, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.14.40 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu May 10 07:39:32 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.14.40-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: c5a9c8283a6928d22ddc589157213f4f331fca76
git describe: v4.14.39-44-gc5a9c8283a69
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.39-44-gc5a9c8283a69

No regressions (compared to build v4.14.39-4-g5ce1e4d96025)
------------------------------------------------------------------------

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c
* boot - fail: 4, pass: 20
* kselftest - skip: 27, pass: 41
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 134, pass: 1016
* ltp-timers-tests - pass: 13

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 24, pass: 44
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 135, pass: 1015
* ltp-timers-tests - pass: 13

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 25, pass: 43
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 134, pass: 1016
* ltp-timers-tests - pass: 13

qemu_arm
* boot - fail: 7, pass: 13
* ltp-cap_bounds-tests - pass: 2
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 7, pass: 7
* ltp-securebits-tests - pass: 4

qemu_arm64
* boot - pass: 20
* kselftest - skip: 29, pass: 41
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 6, pass: 8
* ltp-securebits-tests - pass: 4
* ltp-timers-tests - pass: 13

qemu_x86_64
* boot - pass: 20
* kselftest - skip: 30, pass: 50
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 153, pass: 997
* ltp-timers-tests - pass: 13

x15 - arm
* boot - pass: 20
* kselftest - skip: 26, fail: 2, pass: 37
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 75, pass: 1075
* ltp-timers-tests - pass: 13

x86_64
* boot - pass: 22
* kselftest - skip: 22, pass: 54
* kselftest-vsyscall-mode-native - skip: 25, fail: 1, pass: 53
* kselftest-vsyscall-mode-none - skip: 25, pass: 54
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 5, pass: 58
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 116, pass: 1034
* ltp-timers-tests - pass: 13

-- 
Linaro QA (BETA)
https://qa-reports.linaro.org
_______________________

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Nathan Chancellor]

On Tue, May 08, 2018 at 10:10:19AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.40 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu May 10 07:39:32 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled, and installed onto my Raspberry Pi 3.

No issues during initial usage or in dmesg.

Thanks!
Nathan

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Greg Kroah-Hartman]

On Tue, May 08, 2018 at 03:11:52PM -0700, Nathan Chancellor wrote:
> On Tue, May 08, 2018 at 10:10:19AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.40 release.
> > There are 43 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu May 10 07:39:32 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Merged, compiled, and installed onto my Raspberry Pi 3.
> 
> No issues during initial usage or in dmesg.

Thanks for testing and letting me know.

greg k-h

Re: [PATCH 4.14 00/43] 4.14.40-stable review

[Shuah Khan]

On 05/08/2018 02:10 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.40 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu May 10 07:39:32 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah