From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:60984 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753790AbeERIWb (ORCPT ); Fri, 18 May 2018 04:22:31 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Alexey Khoroshilov , Ben Hutchings Subject: [PATCH 4.9 26/33] serial: sccnxp: Fix error handling in sccnxp_probe() Date: Fri, 18 May 2018 10:16:05 +0200 Message-Id: <20180518081536.129606967@linuxfoundation.org> In-Reply-To: <20180518081535.096308218@linuxfoundation.org> References: <20180518081535.096308218@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Alexey Khoroshilov commit c91261437985d481c472639d4397931d77f5d4e9 upstream. sccnxp_probe() returns result of regulator_disable() that may lead to returning zero, while device is not properly initialized. Also the driver enables clocks, but it does not disable it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -889,7 +889,16 @@ static int sccnxp_probe(struct platform_ goto err_out; uartclk = 0; } else { - clk_prepare_enable(clk); + ret = clk_prepare_enable(clk); + if (ret) + goto err_out; + + ret = devm_add_action_or_reset(&pdev->dev, + (void(*)(void *))clk_disable_unprepare, + clk); + if (ret) + goto err_out; + uartclk = clk_get_rate(clk); } @@ -988,7 +997,7 @@ static int sccnxp_probe(struct platform_ uart_unregister_driver(&s->uart); err_out: if (!IS_ERR(s->regulator)) - return regulator_disable(s->regulator); + regulator_disable(s->regulator); return ret; }