From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Slava Kardakov , Heiner Kallweit , "David S. Miller" Subject: [PATCH 3.18 10/45] r8169: fix powering up RTL8168h Date: Thu, 24 May 2018 11:38:18 +0200 Message-Id: <20180524093121.774651295@linuxfoundation.org> In-Reply-To: <20180524093120.599252450@linuxfoundation.org> References: <20180524093120.599252450@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Heiner Kallweit [ Upstream commit 3148dedfe79e422f448a10250d3e2cdf8b7ee617 ] Since commit a92a08499b1f "r8169: improve runtime pm in general and suspend unused ports" interfaces w/o link are runtime-suspended after 10s. On systems where drivers take longer to load this can lead to the situation that the interface is runtime-suspended already when it's initially brought up. This shouldn't be a problem because rtl_open() resumes MAC/PHY. However with at least one chip version the interface doesn't properly come up, as reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199549 The vendor driver uses a delay to give certain chip versions some time to resume before starting the PHY configuration. So let's do the same. I don't know which chip versions may be affected, therefore apply this delay always. This patch was reported to fix the issue for RTL8168h. I was able to reproduce the issue on an Asus H310I-Plus which also uses a RTL8168h. Also in my case the patch fixed the issue. Reported-by: Slava Kardakov Tested-by: Slava Kardakov Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/realtek/r8169.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4764,6 +4764,9 @@ static void rtl_pll_power_down(struct rt static void rtl_pll_power_up(struct rtl8169_private *tp) { rtl_generic_op(tp, tp->pll_power_ops.up); + + /* give MAC/PHY some time to resume */ + msleep(20); } static void rtl_init_pll_power_ops(struct rtl8169_private *tp)