[PATCH 3.18 00/45] 3.18.110-stable review

[PATCH 3.18 00/45] 3.18.110-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.110 release.
There are 45 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat May 26 09:30:59 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.110-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.110-rc1

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    x86/kexec: Avoid double free_page() upon do_kexec_load() failure

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    hfsplus: stop workqueue when fill_super() failed

Johannes Berg <johannes.berg@intel.com>
    cfg80211: limit wiphy names to 128 bytes

Alexander Potapenko <glider@google.com>
    scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()

Jason Yan <yanaijie@huawei.com>
    scsi: libsas: defer ata device eh commands to libata

Al Viro <viro@zeniv.linux.org.uk>
    ext2: fix a block leak

Eric Dumazet <edumazet@google.com>
    tcp: purge write queue in tcp_connect_init()

Willem de Bruijn <willemb@google.com>
    net: test tailroom before appending to linear skb

Masami Hiramatsu <mhiramat@kernel.org>
    ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions

Dexuan Cui <decui@microsoft.com>
    tick/broadcast: Use for_each_cpu() specially on UP kernels

Masami Hiramatsu <mhiramat@kernel.org>
    ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode

Nicholas Piggin <npiggin@gmail.com>
    powerpc/powernv: Fix NVRAM sleep in invalid context when crashing

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    powerpc: Don't preempt_disable() in show_cpuinfo()

Wenwen Wang <wang6495@umn.edu>
    ALSA: control: fix a redundant-copy issue

Federico Cuello <fedux@fedux.com.ar>
    ALSA: usb: mixer: volume quirk for CM102-A+/102S+

Shuah Khan (Samsung OSG) <shuah@kernel.org>
    usbip: usbip_host: fix bad unlock balance during stub_probe()

Shuah Khan (Samsung OSG) <shuah@kernel.org>
    usbip: usbip_host: fix NULL-ptr deref and use-after-free errors

Alexey Khoroshilov <khoroshilov@ispras.ru>
    usbip: fix error handling in stub_probe()

Shuah Khan (Samsung OSG) <shuah@kernel.org>
    usbip: usbip_host: run rebind from exit when module is removed

Shuah Khan (Samsung OSG) <shuah@kernel.org>
    usbip: usbip_host: delete device from busid_table after rebind

Shuah Khan <shuahkh@osg.samsung.com>
    usbip: usbip_host: refine probe and disconnect debug msgs to be useful

zhongjiang <zhongjiang@huawei.com>
    kernel/exit.c: avoid undefined behaviour when calling wait4()

Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
    pipe: cap initial pipe capacity according to pipe-max-size limit

James Chapman <jchapman@katalix.com>
    l2tp: revert "l2tp: fix missing print session offset info"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"

Vasily Averin <vvs@virtuozzo.com>
    lockd: lost rollback of set_grace_period() in lockd_down_net()

Bjørn Mork <bjorn@mork.no>
    qmi_wwan: do not steal interfaces from class drivers

Xin Long <lucien.xin@gmail.com>
    sctp: delay the authentication for the duplicated cookie-echo chunk

Xin Long <lucien.xin@gmail.com>
    sctp: fix the issue that the cookie-ack with auth can't get processed

Yuchung Cheng <ycheng@google.com>
    tcp: ignore Fast Open on repair mode

Debabrata Banerjee <dbanerje@akamai.com>
    bonding: do not allow rlb updates to invalid mac

Michael Chan <michael.chan@broadcom.com>
    tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

Xin Long <lucien.xin@gmail.com>
    sctp: use the old asoc when making the cookie-ack chunk in dupcook_d

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: fix powering up RTL8168h

Lance Richardson <lance.richardson.net@gmail.com>
    net: support compat 64-bit time in {s,g}etsockopt

Eric Dumazet <edumazet@google.com>
    net_sched: fq: take care of throttled flows before reuse

Moshe Shemesh <moshe@mellanox.com>
    net/mlx4_en: Verify coalescing parameters are in range

Rob Taglang <rob@taglang.io>
    net: ethernet: sun: niu set correct packet size in skb

Eric Dumazet <edumazet@google.com>
    llc: better deal with too small mtu

Andrey Ignatov <rdna@fb.com>
    ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg

Eric Dumazet <edumazet@google.com>
    dccp: fix tasklet usage

Hangbin Liu <liuhangbin@gmail.com>
    bridge: check iface upper dev when setting master via ioctl

Ingo Molnar <mingo@elte.hu>
    8139too: Use disable_irq_nosync() in rtl8139_poll_controller()


-------------

Diffstat:

 Makefile                                        |   4 +-
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi        |   1 -
 arch/arm/include/asm/assembler.h                |  10 +++
 arch/arm/kernel/traps.c                         |   5 +-
 arch/arm/lib/getuser.S                          |  10 +++
 arch/powerpc/kernel/setup-common.c              |  11 ---
 arch/powerpc/platforms/powernv/opal-nvram.c     |  14 +++-
 arch/x86/boot/compressed/eboot.c                |   6 +-
 arch/x86/kernel/machine_kexec_32.c              |   6 +-
 arch/x86/kernel/machine_kexec_64.c              |   4 +-
 arch/x86/xen/mmu.c                              |   4 -
 drivers/net/bonding/bond_alb.c                  |   2 +-
 drivers/net/ethernet/broadcom/tg3.c             |   9 +-
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |  16 ++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h    |   7 +-
 drivers/net/ethernet/realtek/8139too.c          |   2 +-
 drivers/net/ethernet/realtek/r8169.c            |   3 +
 drivers/net/ethernet/sun/niu.c                  |   5 +-
 drivers/net/usb/qmi_wwan.c                      |  13 +++
 drivers/scsi/libsas/sas_scsi_host.c             |  33 +++-----
 drivers/scsi/sg.c                               |   2 +-
 drivers/usb/usbip/stub.h                        |   2 +
 drivers/usb/usbip/stub_dev.c                    |  69 +++++++++-------
 drivers/usb/usbip/stub_main.c                   | 105 +++++++++++++++++++++---
 fs/ext2/inode.c                                 |  10 ---
 fs/hfsplus/super.c                              |   1 +
 fs/lockd/svc.c                                  |   2 +
 fs/pipe.c                                       |   3 +
 include/linux/efi.h                             |   8 +-
 include/trace/events/xen.h                      |  16 ----
 include/uapi/linux/nl80211.h                    |   2 +
 kernel/exit.c                                   |   4 +
 kernel/time/tick-broadcast.c                    |   8 ++
 net/bridge/br_if.c                              |   4 +-
 net/compat.c                                    |   6 +-
 net/dccp/ccids/ccid2.c                          |  14 +++-
 net/dccp/timer.c                                |   2 +-
 net/ipv4/ip_output.c                            |   3 +-
 net/ipv4/ping.c                                 |   7 +-
 net/ipv4/tcp.c                                  |   2 +-
 net/ipv4/tcp_output.c                           |   7 +-
 net/ipv4/udp.c                                  |   7 +-
 net/ipv6/ip6_output.c                           |   3 +-
 net/l2tp/l2tp_netlink.c                         |   2 -
 net/llc/af_llc.c                                |   3 +
 net/sched/sch_fq.c                              |  37 ++++++---
 net/sctp/associola.c                            |  30 ++++++-
 net/sctp/inqueue.c                              |   2 +-
 net/sctp/sm_statefuns.c                         |  89 +++++++++++---------
 net/wireless/core.c                             |   3 +
 sound/core/control_compat.c                     |   3 +-
 sound/usb/mixer.c                               |   8 ++
 52 files changed, 427 insertions(+), 202 deletions(-)

[PATCH 3.18 01/45] 8139too: Use disable_irq_nosync() in rtl8139_poll_controller()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ingo Molnar <mingo@elte.hu>

[ Upstream commit af3e0fcf78879f718c5f73df0814951bd7057d34 ]

Use disable_irq_nosync() instead of disable_irq() as this might be
called in atomic context with netpoll.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/8139too.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -2215,7 +2215,7 @@ static void rtl8139_poll_controller(stru
 	struct rtl8139_private *tp = netdev_priv(dev);
 	const int irq = tp->pci_dev->irq;
 
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	rtl8139_interrupt(irq, dev);
 	enable_irq(irq);
 }

[PATCH 3.18 02/45] bridge: check iface upper dev when setting master via ioctl

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit e8238fc2bd7b4c3c7554fa2df067e796610212fc ]

When we set a bond slave's master to bridge via ioctl, we only check
the IFF_BRIDGE_PORT flag. Although we will find the slave's real master
at netdev_master_upper_dev_link() later, it already does some settings
and allocates some resources. It would be better to return as early
as possible.

v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev()
to check if we have a master, because not all upper devs are masters,
e.g. vlan device.

Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_if.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -445,8 +445,8 @@ int br_add_if(struct net_bridge *br, str
 	if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
 		return -ELOOP;
 
-	/* Device is already being bridged */
-	if (br_port_exists(dev))
+	/* Device has master upper dev */
+	if (netdev_master_upper_dev_get(dev))
 		return -EBUSY;
 
 	/* No bridging devices that dislike that (e.g. wireless) */

[PATCH 3.18 03/45] dccp: fix tasklet usage

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a8d7aa17bbc970971ccdf71988ea19230ab368b1 ]

syzbot reported a crash in tasklet_action_common() caused by dccp.

dccp needs to make sure socket wont disappear before tasklet handler
has completed.

This patch takes a reference on the socket when arming the tasklet,
and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet()

kernel BUG at kernel/softirq.c:514!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515
RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246
dccp_close: ABORT with 65423 bytes unread
RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000
RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000
RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94
dccp_close: ABORT with 65423 bytes unread
R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000
R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490
FS:  0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tasklet_action+0x1d/0x20 kernel/softirq.c:533
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
dccp_close: ABORT with 65423 bytes unread
 run_ksoftirqd+0x86/0x100 kernel/softirq.c:646
 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
 kthread+0x345/0x410 kernel/kthread.c:238
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8
RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8

Fixes: dc841e30eaea ("dccp: Extend CCID packet dequeueing interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid2.c |   14 ++++++++++++--
 net/dccp/timer.c       |    2 +-
 2 files changed, 13 insertions(+), 3 deletions(-)

--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -126,6 +126,16 @@ static void ccid2_change_l_seq_window(st
 						  DCCPF_SEQ_WMAX));
 }
 
+static void dccp_tasklet_schedule(struct sock *sk)
+{
+	struct tasklet_struct *t = &dccp_sk(sk)->dccps_xmitlet;
+
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
+		sock_hold(sk);
+		__tasklet_schedule(t);
+	}
+}
+
 static void ccid2_hc_tx_rto_expire(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
@@ -166,7 +176,7 @@ static void ccid2_hc_tx_rto_expire(unsig
 
 	/* if we were blocked before, we may now send cwnd=1 packet */
 	if (sender_was_blocked)
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	/* restart backed-off timer */
 	sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
 out:
@@ -706,7 +716,7 @@ static void ccid2_hc_tx_packet_recv(stru
 done:
 	/* check if incoming Acks allow pending packets to be sent */
 	if (sender_was_blocked && !ccid2_cwnd_network_limited(hc))
-		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+		dccp_tasklet_schedule(sk);
 	dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks);
 }
 
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -252,12 +252,12 @@ static void dccp_write_xmitlet(unsigned
 	else
 		dccp_write_xmit(sk);
 	bh_unlock_sock(sk);
+	sock_put(sk);
 }
 
 static void dccp_write_xmit_timer(unsigned long data)
 {
 	dccp_write_xmitlet(data);
-	sock_put((struct sock *)data);
 }
 
 void dccp_init_xmit_timers(struct sock *sk)

[PATCH 3.18 04/45] ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Ignatov <rdna@fb.com>

[ Upstream commit 1b97013bfb11d66f041de691de6f0fec748ce016 ]

Fix more memory leaks in ip_cmsg_send() callers. Part of them were fixed
earlier in 919483096bfe.

* udp_sendmsg one was there since the beginning when linux sources were
  first added to git;
* ping_v4_sendmsg one was copy/pasted in c319b4d76b9e.

Whenever return happens in udp_sendmsg() or ping_v4_sendmsg() IP options
have to be freed if they were allocated previously.

Add label so that future callers (if any) can use it instead of kfree()
before return that is easy to forget.

Fixes: c319b4d76b9e (net: ipv4: add IPPROTO_ICMP socket kind)
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ping.c |    7 +++++--
 net/ipv4/udp.c  |    7 +++++--
 2 files changed, 10 insertions(+), 4 deletions(-)

--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -771,8 +771,10 @@ static int ping_v4_sendmsg(struct kiocb
 	ipc.addr = faddr = daddr;
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 	}
 	tos = get_rttos(&ipc, inet);
@@ -837,6 +839,7 @@ back_from_confirm:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err) {
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -975,8 +975,10 @@ int udp_sendmsg(struct kiocb *iocb, stru
 	ipc.addr = faddr = daddr;
 
 	if (ipc.opt && ipc.opt->opt.srr) {
-		if (!daddr)
-			return -EINVAL;
+		if (!daddr) {
+			err = -EINVAL;
+			goto out_free;
+		}
 		faddr = ipc.opt->opt.faddr;
 		connected = 0;
 	}
@@ -1081,6 +1083,7 @@ do_append_data:
 
 out:
 	ip_rt_put(rt);
+out_free:
 	if (free)
 		kfree(ipc.opt);
 	if (!err)

[PATCH 3.18 05/45] llc: better deal with too small mtu

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 2c5d5b13c6eb79f5677e206b8aad59b3a2097f60 ]

syzbot loves to set very small mtu on devices, since it brings joy.
We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/llc/af_llc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -928,6 +928,9 @@ static int llc_ui_sendmsg(struct kiocb *
 	if (size > llc->dev->mtu)
 		size = llc->dev->mtu;
 	copied = size - hdrlen;
+	rc = -EINVAL;
+	if (copied < 0)
+		goto release;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, noblock, &rc);
 	lock_sock(sk);

[PATCH 3.18 06/45] net: ethernet: sun: niu set correct packet size in skb

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Taglang <rob@taglang.io>

[ Upstream commit 14224923c3600bae2ac4dcae3bf0c3d4dc2812be ]

Currently, skb->len and skb->data_len are set to the page size, not
the packet size. This causes the frame check sequence to not be
located at the "end" of the packet resulting in ethernet frame check
errors. The driver does work currently, but stricter kernel facing
networking solutions like OpenVSwitch will drop these packets as
invalid.

These changes set the packet size correctly so that these errors no
longer occur. The length does not include the frame check sequence, so
that subtraction was removed.

Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network
Controller [108e:abcd] and validated in wireshark.

Signed-off-by: Rob Taglang <rob@taglang.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -3443,7 +3443,7 @@ static int niu_process_rx_pkt(struct nap
 
 		len = (val & RCR_ENTRY_L2_LEN) >>
 			RCR_ENTRY_L2_LEN_SHIFT;
-		len -= ETH_FCS_LEN;
+		append_size = len + ETH_HLEN + ETH_FCS_LEN;
 
 		addr = (val & RCR_ENTRY_PKT_BUF_ADDR) <<
 			RCR_ENTRY_PKT_BUF_ADDR_SHIFT;
@@ -3453,7 +3453,6 @@ static int niu_process_rx_pkt(struct nap
 					 RCR_ENTRY_PKTBUFSZ_SHIFT];
 
 		off = addr & ~PAGE_MASK;
-		append_size = rcr_size;
 		if (num_rcr == 1) {
 			int ptype;
 
@@ -3466,7 +3465,7 @@ static int niu_process_rx_pkt(struct nap
 			else
 				skb_checksum_none_assert(skb);
 		} else if (!(val & RCR_ENTRY_MULTI))
-			append_size = len - skb->len;
+			append_size = append_size - skb->len;
 
 		niu_rx_skb_append(skb, page, off, append_size, rcr_size);
 		if ((page->index + rp->rbr_block_size) - rcr_size == addr) {

[PATCH 3.18 07/45] net/mlx4_en: Verify coalescing parameters are in range

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 6ad4e91c6d796b38a7f0e724db1de28eeb122bad ]

Add check of coalescing parameters received through ethtool are within
range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the
users through ethtool. The ethtool support up to 32 bit value for each.
However, mlx4 modify cq limits the coalescing time parameter and
coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to
higher values.
Change type of sample-interval and adaptive_rx_coal parameters in mlx4
driver to u32 as the ethtool holds them as u32 and these parameters are
not limited due to mlx4 HW.

Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |   16 ++++++++++++++++
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h    |    7 +++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -453,6 +453,22 @@ static int mlx4_en_set_coalesce(struct n
 	if (!coal->tx_max_coalesced_frames_irq)
 		return -EINVAL;
 
+	if (coal->tx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_low > MLX4_EN_MAX_COAL_TIME ||
+	    coal->rx_coalesce_usecs_high > MLX4_EN_MAX_COAL_TIME) {
+		netdev_info(dev, "%s: maximum coalesce time supported is %d usecs\n",
+			    __func__, MLX4_EN_MAX_COAL_TIME);
+		return -ERANGE;
+	}
+
+	if (coal->tx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS ||
+	    coal->rx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS) {
+		netdev_info(dev, "%s: maximum coalesced frames supported is %d\n",
+			    __func__, MLX4_EN_MAX_COAL_PKTS);
+		return -ERANGE;
+	}
+
 	priv->rx_frames = (coal->rx_max_coalesced_frames ==
 			   MLX4_EN_AUTO_CONF) ?
 				MLX4_EN_RX_COAL_TARGET :
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -138,6 +138,9 @@ enum {
 #define MLX4_EN_TX_COAL_PKTS	16
 #define MLX4_EN_TX_COAL_TIME	0x10
 
+#define MLX4_EN_MAX_COAL_PKTS	U16_MAX
+#define MLX4_EN_MAX_COAL_TIME	U16_MAX
+
 #define MLX4_EN_RX_RATE_LOW		400000
 #define MLX4_EN_RX_COAL_TIME_LOW	0
 #define MLX4_EN_RX_RATE_HIGH		450000
@@ -535,8 +538,8 @@ struct mlx4_en_priv {
 	u16 rx_usecs_low;
 	u32 pkt_rate_high;
 	u16 rx_usecs_high;
-	u16 sample_interval;
-	u16 adaptive_rx_coal;
+	u32 sample_interval;
+	u32 adaptive_rx_coal;
 	u32 msg_enable;
 	u32 loopback_ok;
 	u32 validate_loopback;

[PATCH 3.18 08/45] net_sched: fq: take care of throttled flows before reuse

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 7df40c2673a1307c3260aab6f9d4b9bf97ca8fd7 ]

Normally, a socket can not be freed/reused unless all its TX packets
left qdisc and were TX-completed. However connect(AF_UNSPEC) allows
this to happen.

With commit fc59d5bdf1e3 ("pkt_sched: fq: clear time_next_packet for
reused flows") we cleared f->time_next_packet but took no special
action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches,
blindly clearing it might break rb-tree integrity. We need to make
sure the flow is no longer in the rb-tree to avoid this problem.

Fixes: fc59d5bdf1e3 ("pkt_sched: fq: clear time_next_packet for reused flows")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_fq.c |   37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -124,6 +124,28 @@ static bool fq_flow_is_detached(const st
 	return f->next == &detached;
 }
 
+static bool fq_flow_is_throttled(const struct fq_flow *f)
+{
+	return f->next == &throttled;
+}
+
+static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
+{
+	if (head->first)
+		head->last->next = flow;
+	else
+		head->first = flow;
+	head->last = flow;
+	flow->next = NULL;
+}
+
+static void fq_flow_unset_throttled(struct fq_sched_data *q, struct fq_flow *f)
+{
+	rb_erase(&f->rate_node, &q->delayed);
+	q->throttled_flows--;
+	fq_flow_add_tail(&q->old_flows, f);
+}
+
 static void fq_flow_set_throttled(struct fq_sched_data *q, struct fq_flow *f)
 {
 	struct rb_node **p = &q->delayed.rb_node, *parent = NULL;
@@ -151,15 +173,6 @@ static void fq_flow_set_throttled(struct
 
 static struct kmem_cache *fq_flow_cachep __read_mostly;
 
-static void fq_flow_add_tail(struct fq_flow_head *head, struct fq_flow *flow)
-{
-	if (head->first)
-		head->last->next = flow;
-	else
-		head->first = flow;
-	head->last = flow;
-	flow->next = NULL;
-}
 
 /* limit number of collected flows per round */
 #define FQ_GC_MAX 8
@@ -251,6 +264,8 @@ static struct fq_flow *fq_classify(struc
 				     f->socket_hash != sk->sk_hash)) {
 				f->credit = q->initial_quantum;
 				f->socket_hash = sk->sk_hash;
+				if (fq_flow_is_throttled(f))
+					fq_flow_unset_throttled(q, f);
 				f->time_next_packet = 0ULL;
 			}
 			return f;
@@ -405,9 +420,7 @@ static void fq_check_throttled(struct fq
 			q->time_next_delayed_flow = f->time_next_packet;
 			break;
 		}
-		rb_erase(p, &q->delayed);
-		q->throttled_flows--;
-		fq_flow_add_tail(&q->old_flows, f);
+		fq_flow_unset_throttled(q, f);
 	}
 }
 

[PATCH 3.18 09/45] net: support compat 64-bit time in {s,g}etsockopt

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lance Richardson <lance.richardson.net@gmail.com>

[ Upstream commit 988bf7243e03ef69238381594e0334a79cef74a6 ]

For the x32 ABI, struct timeval has two 64-bit fields. However
the kernel currently interprets the user-space values used for
the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair
of 32-bit fields.

When the seconds portion of the requested timeout is less than 2**32,
the seconds portion of the effective timeout is correct but the
microseconds portion is zero.  When the seconds portion of the
requested timeout is zero and the microseconds portion is non-zero,
the kernel interprets the timeout as zero (never timeout).

Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required
for the ABI.

The code included below demonstrates the problem.

Results before patch:
    $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.008181 seconds
    send time: 2.015985 seconds

    $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.016763 seconds
    send time: 2.016062 seconds

    $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 1.007239 seconds
    send time: 1.023890 seconds

Results after patch:
    $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.010062 seconds
    send time: 2.015836 seconds

    $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.013974 seconds
    send time: 2.015981 seconds

    $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.030257 seconds
    send time: 2.013383 seconds

 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/socket.h>
 #include <sys/types.h>
 #include <sys/time.h>

 void checkrc(char *str, int rc)
 {
         if (rc >= 0)
                 return;

         perror(str);
         exit(1);
 }

 static char buf[1024];
 int main(int argc, char **argv)
 {
         int rc;
         int socks[2];
         struct timeval tv;
         struct timeval start, end, delta;

         rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
         checkrc("socketpair", rc);

         /* set timeout to 1.999999 seconds */
         tv.tv_sec = 1;
         tv.tv_usec = 999999;
         rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv);
         rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv);
         checkrc("setsockopt", rc);

         /* measure actual receive timeout */
         gettimeofday(&start, NULL);
         rc = recv(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("recv time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);

         /* fill send buffer */
         do {
                 rc = send(socks[0], buf, sizeof buf, 0);
         } while (rc > 0);

         /* measure actual send timeout */
         gettimeofday(&start, NULL);
         rc = send(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("send time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);
         exit(0);
 }

Fixes: 515c7af85ed9 ("x32: Use compat shims for {g,s}etsockopt")
Reported-by: Gopal RajagopalSai <gopalsr83@gmail.com>
Signed-off-by: Lance Richardson <lance.richardson.net@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/compat.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/compat.c
+++ b/net/compat.c
@@ -387,7 +387,8 @@ static int compat_sock_setsockopt(struct
 	if (optname == SO_ATTACH_FILTER)
 		return do_set_attach_filter(sock, level, optname,
 					    optval, optlen);
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_set_sock_timeout(sock, level, optname, optval, optlen);
 
 	return sock_setsockopt(sock, level, optname, optval, optlen);
@@ -452,7 +453,8 @@ static int do_get_sock_timeout(struct so
 static int compat_sock_getsockopt(struct socket *sock, int level, int optname,
 				char __user *optval, int __user *optlen)
 {
-	if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
+	if (!COMPAT_USE_64BIT_TIME &&
+	    (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO))
 		return do_get_sock_timeout(sock, level, optname, optval, optlen);
 	return sock_getsockopt(sock, level, optname, optval, optlen);
 }

[PATCH 3.18 10/45] r8169: fix powering up RTL8168h

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 3148dedfe79e422f448a10250d3e2cdf8b7ee617 ]

Since commit a92a08499b1f "r8169: improve runtime pm in general and
suspend unused ports" interfaces w/o link are runtime-suspended after
10s. On systems where drivers take longer to load this can lead to the
situation that the interface is runtime-suspended already when it's
initially brought up.
This shouldn't be a problem because rtl_open() resumes MAC/PHY.
However with at least one chip version the interface doesn't properly
come up, as reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199549

The vendor driver uses a delay to give certain chip versions some
time to resume before starting the PHY configuration. So let's do
the same. I don't know which chip versions may be affected,
therefore apply this delay always.

This patch was reported to fix the issue for RTL8168h.
I was able to reproduce the issue on an Asus H310I-Plus which also
uses a RTL8168h. Also in my case the patch fixed the issue.

Reported-by: Slava Kardakov <ojab@ojab.ru>
Tested-by: Slava Kardakov <ojab@ojab.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4764,6 +4764,9 @@ static void rtl_pll_power_down(struct rt
 static void rtl_pll_power_up(struct rtl8169_private *tp)
 {
 	rtl_generic_op(tp, tp->pll_power_ops.up);
+
+	/* give MAC/PHY some time to resume */
+	msleep(20);
 }
 
 static void rtl_init_pll_power_ops(struct rtl8169_private *tp)

[PATCH 3.18 11/45] sctp: use the old asoc when making the cookie-ack chunk in dupcook_d

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 46e16d4b956867013e0bbd7f2bad206f4aa55752 ]

When processing a duplicate cookie-echo chunk, for case 'D', sctp will
not process the param from this chunk. It means old asoc has nothing
to be updated, and the new temp asoc doesn't have the complete info.

So there's no reason to use the new asoc when creating the cookie-ack
chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
can not be set with auth, and it will definitely be dropped by peer.

This issue is there since very beginning, and we fix it by using the
old asoc instead.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_statefuns.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1959,7 +1959,7 @@ static sctp_disposition_t sctp_sf_do_dup
 		}
 	}
 
-	repl = sctp_make_cookie_ack(new_asoc, chunk);
+	repl = sctp_make_cookie_ack(asoc, chunk);
 	if (!repl)
 		goto nomem;
 

[PATCH 3.18 12/45] tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent().

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit d89a2adb8bfe6f8949ff389acdb9fa298b6e8e12 ]

tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats
under spinlock and can trigger BUG_ON() in vunmap() because vunmap()
may sleep.  Fix it by removing the spinlock and relying on the
TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between
tg3_get_stats64() and tg3_free_consistent().  TG3_FLAG_INIT_COMPLETE
is always cleared under tp->lock before tg3_free_consistent()
and therefore tg3_get_stats64() can safely access tp->hw_stats
under tp->lock if TG3_FLAG_INIT_COMPLETE is set.

Fixes: f5992b72ebe0 ("tg3: Fix race condition in tg3_get_stats64().")
Reported-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/tg3.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -8705,14 +8705,15 @@ static void tg3_free_consistent(struct t
 	tg3_mem_rx_release(tp);
 	tg3_mem_tx_release(tp);
 
-	/* Protect tg3_get_stats64() from reading freed tp->hw_stats. */
-	tg3_full_lock(tp, 0);
+	/* tp->hw_stats can be referenced safely:
+	 *     1. under rtnl_lock
+	 *     2. or under tp->lock if TG3_FLAG_INIT_COMPLETE is set.
+	 */
 	if (tp->hw_stats) {
 		dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats),
 				  tp->hw_stats, tp->stats_mapping);
 		tp->hw_stats = NULL;
 	}
-	tg3_full_unlock(tp);
 }
 
 /*
@@ -14137,7 +14138,7 @@ static struct rtnl_link_stats64 *tg3_get
 	struct tg3 *tp = netdev_priv(dev);
 
 	spin_lock_bh(&tp->lock);
-	if (!tp->hw_stats) {
+	if (!tp->hw_stats || !tg3_flag(tp, INIT_COMPLETE)) {
 		*stats = tp->net_stats_prev;
 		spin_unlock_bh(&tp->lock);
 		return stats;

[PATCH 3.18 13/45] bonding: do not allow rlb updates to invalid mac

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Debabrata Banerjee <dbanerje@akamai.com>

[ Upstream commit 4fa8667ca3989ce14cf66301fa251544fbddbdd0 ]

Make sure multicast, broadcast, and zero mac's cannot be the output of rlb
updates, which should all be directed arps. Receive load balancing will be
collapsed if any of these happen, as the switch will broadcast.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_alb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -453,7 +453,7 @@ static void rlb_update_client(struct rlb
 {
 	int i;
 
-	if (!client_info->slave)
+	if (!client_info->slave || !is_valid_ether_addr(client_info->mac_dst))
 		return;
 
 	for (i = 0; i < RLB_ARP_BURST_SIZE; i++) {

[PATCH 3.18 14/45] tcp: ignore Fast Open on repair mode

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <ycheng@google.com>

[ Upstream commit 16ae6aa1705299789f71fdea59bfb119c1fbd9c0 ]

The TCP repair sequence of operation is to first set the socket in
repair mode, then inject the TCP stats into the socket with repair
socket options, then call connect() to re-activate the socket. The
connect syscall simply returns and set state to ESTABLISHED
mode. As a result Fast Open is meaningless for TCP repair.

However allowing sendto() system call with MSG_FASTOPEN flag half-way
during the repair operation could unexpectedly cause data to be
sent, before the operation finishes changing the internal TCP stats
(e.g. MSS).  This in turn triggers TCP warnings on inconsistent
packet accounting.

The fix is to simply disallow Fast Open operation once the socket
is in the repair mode.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1105,7 +1105,7 @@ int tcp_sendmsg(struct kiocb *iocb, stru
 	lock_sock(sk);
 
 	flags = msg->msg_flags;
-	if (flags & MSG_FASTOPEN) {
+	if ((flags & MSG_FASTOPEN) && !tp->repair) {
 		err = tcp_sendmsg_fastopen(sk, msg, &copied_syn, size);
 		if (err == -EINPROGRESS && copied_syn > 0)
 			goto out;

[PATCH 3.18 15/45] sctp: fix the issue that the cookie-ack with auth cant get processed

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit ce402f044e4e432c296f90eaabb8dbe8f3624391 ]

When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
processes auth chunk first, then continues to the next chunk in
this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
Otherwise, it will go to the next packet or discard this chunk.

However, it missed the fact that cookie-ack chunk's size is equal
to chunk_hdr size, which couldn't match that check, and thus this
chunk would not get processed.

This patch fixes it by changing the check to chunk_end + chunk_hdr
size <= skb_tail_pointer().

Fixes: 26b87c788100 ("net: sctp: fix remote memory pressure from excessive queueing")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/inqueue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/inqueue.c
+++ b/net/sctp/inqueue.c
@@ -178,7 +178,7 @@ struct sctp_chunk *sctp_inq_pop(struct s
 	skb_pull(chunk->skb, sizeof(sctp_chunkhdr_t));
 	chunk->subh.v = NULL; /* Subheader is no longer valid.  */
 
-	if (chunk->chunk_end + sizeof(sctp_chunkhdr_t) <
+	if (chunk->chunk_end + sizeof(sctp_chunkhdr_t) <=
 	    skb_tail_pointer(chunk->skb)) {
 		/* This is not a singleton */
 		chunk->singleton = 0;

[PATCH 3.18 16/45] sctp: delay the authentication for the duplicated cookie-echo chunk

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 59d8d4434f429b4fa8a346fd889058bda427a837 ]

Now sctp only delays the authentication for the normal cookie-echo
chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But
for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does
authentication first based on the old asoc, which will definitely
fail due to the different auth info in the old asoc.

The duplicated cookie-echo chunk will create a new asoc with the
auth info from this chunk, and the authentication should also be
done with the new asoc's auth info for all of the collision 'A',
'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth
will never pass the authentication and create the new connection.

This issue exists since very beginning, and this fix is to make
sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does
for the normal cookie-echo chunk to delay the authentication.

While at it, remove the unused params from sctp_sf_authenticate()
and define sctp_auth_chunk_verify() used for all the places that
do the delayed authentication.

v1->v2:
  fix the typo in changelog as Marcelo noticed.

Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/associola.c    |   30 ++++++++++++++++
 net/sctp/sm_statefuns.c |   87 ++++++++++++++++++++++++++----------------------
 2 files changed, 77 insertions(+), 40 deletions(-)

--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1001,9 +1001,10 @@ static void sctp_assoc_bh_rcv(struct wor
 	struct sctp_endpoint *ep;
 	struct sctp_chunk *chunk;
 	struct sctp_inq *inqueue;
-	int state;
 	sctp_subtype_t subtype;
+	int first_time = 1;	/* is this the first time through the loop */
 	int error = 0;
+	int state;
 
 	/* The association should be held so we should be safe. */
 	ep = asoc->ep;
@@ -1014,6 +1015,30 @@ static void sctp_assoc_bh_rcv(struct wor
 		state = asoc->state;
 		subtype = SCTP_ST_CHUNK(chunk->chunk_hdr->type);
 
+		/* If the first chunk in the packet is AUTH, do special
+		 * processing specified in Section 6.3 of SCTP-AUTH spec
+		 */
+		if (first_time && subtype.chunk == SCTP_CID_AUTH) {
+			struct sctp_chunkhdr *next_hdr;
+
+			next_hdr = sctp_inq_peek(inqueue);
+			if (!next_hdr)
+				goto normal;
+
+			/* If the next chunk is COOKIE-ECHO, skip the AUTH
+			 * chunk while saving a pointer to it so we can do
+			 * Authentication later (during cookie-echo
+			 * processing).
+			 */
+			if (next_hdr->type == SCTP_CID_COOKIE_ECHO) {
+				chunk->auth_chunk = skb_clone(chunk->skb,
+							      GFP_ATOMIC);
+				chunk->auth = 1;
+				continue;
+			}
+		}
+
+normal:
 		/* SCTP-AUTH, Section 6.3:
 		 *    The receiver has a list of chunk types which it expects
 		 *    to be received only after an AUTH-chunk.  This list has
@@ -1052,6 +1077,9 @@ static void sctp_assoc_bh_rcv(struct wor
 		/* If there is an error on chunk, discard this packet. */
 		if (error && chunk)
 			chunk->pdiscard = 1;
+
+		if (first_time)
+			first_time = 0;
 	}
 	sctp_association_put(asoc);
 }
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -144,10 +144,8 @@ static sctp_disposition_t sctp_sf_violat
 				     void *arg,
 				     sctp_cmd_seq_t *commands);
 
-static sctp_ierror_t sctp_sf_authenticate(struct net *net,
-				    const struct sctp_endpoint *ep,
+static sctp_ierror_t sctp_sf_authenticate(
 				    const struct sctp_association *asoc,
-				    const sctp_subtype_t type,
 				    struct sctp_chunk *chunk);
 
 static sctp_disposition_t __sctp_sf_do_9_1_abort(struct net *net,
@@ -615,6 +613,38 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(s
 	return SCTP_DISPOSITION_CONSUME;
 }
 
+static bool sctp_auth_chunk_verify(struct net *net, struct sctp_chunk *chunk,
+				   const struct sctp_association *asoc)
+{
+	struct sctp_chunk auth;
+
+	if (!chunk->auth_chunk)
+		return true;
+
+	/* SCTP-AUTH:  auth_chunk pointer is only set when the cookie-echo
+	 * is supposed to be authenticated and we have to do delayed
+	 * authentication.  We've just recreated the association using
+	 * the information in the cookie and now it's much easier to
+	 * do the authentication.
+	 */
+
+	/* Make sure that we and the peer are AUTH capable */
+	if (!net->sctp.auth_enable || !asoc->peer.auth_capable)
+		return false;
+
+	/* set-up our fake chunk so that we can process it */
+	auth.skb = chunk->auth_chunk;
+	auth.asoc = chunk->asoc;
+	auth.sctp_hdr = chunk->sctp_hdr;
+	auth.chunk_hdr = (struct sctp_chunkhdr *)
+				skb_push(chunk->auth_chunk,
+					 sizeof(struct sctp_chunkhdr));
+	skb_pull(chunk->auth_chunk, sizeof(struct sctp_chunkhdr));
+	auth.transport = chunk->transport;
+
+	return sctp_sf_authenticate(asoc, &auth) == SCTP_IERROR_NO_ERROR;
+}
+
 /*
  * Respond to a normal COOKIE ECHO chunk.
  * We are the side that is being asked for an association.
@@ -751,36 +781,9 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(st
 	if (error)
 		goto nomem_init;
 
-	/* SCTP-AUTH:  auth_chunk pointer is only set when the cookie-echo
-	 * is supposed to be authenticated and we have to do delayed
-	 * authentication.  We've just recreated the association using
-	 * the information in the cookie and now it's much easier to
-	 * do the authentication.
-	 */
-	if (chunk->auth_chunk) {
-		struct sctp_chunk auth;
-		sctp_ierror_t ret;
-
-		/* Make sure that we and the peer are AUTH capable */
-		if (!net->sctp.auth_enable || !new_asoc->peer.auth_capable) {
-			sctp_association_free(new_asoc);
-			return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
-		}
-
-		/* set-up our fake chunk so that we can process it */
-		auth.skb = chunk->auth_chunk;
-		auth.asoc = chunk->asoc;
-		auth.sctp_hdr = chunk->sctp_hdr;
-		auth.chunk_hdr = (sctp_chunkhdr_t *)skb_push(chunk->auth_chunk,
-					    sizeof(sctp_chunkhdr_t));
-		skb_pull(chunk->auth_chunk, sizeof(sctp_chunkhdr_t));
-		auth.transport = chunk->transport;
-
-		ret = sctp_sf_authenticate(net, ep, new_asoc, type, &auth);
-		if (ret != SCTP_IERROR_NO_ERROR) {
-			sctp_association_free(new_asoc);
-			return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
-		}
+	if (!sctp_auth_chunk_verify(net, chunk, new_asoc)) {
+		sctp_association_free(new_asoc);
+		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
 	}
 
 	repl = sctp_make_cookie_ack(new_asoc, chunk);
@@ -1717,13 +1720,15 @@ static sctp_disposition_t sctp_sf_do_dup
 			       GFP_ATOMIC))
 		goto nomem;
 
+	if (!sctp_auth_chunk_verify(net, chunk, new_asoc))
+		return SCTP_DISPOSITION_DISCARD;
+
 	/* Make sure no new addresses are being added during the
 	 * restart.  Though this is a pretty complicated attack
 	 * since you'd have to get inside the cookie.
 	 */
-	if (!sctp_sf_check_restart_addrs(new_asoc, asoc, chunk, commands)) {
+	if (!sctp_sf_check_restart_addrs(new_asoc, asoc, chunk, commands))
 		return SCTP_DISPOSITION_CONSUME;
-	}
 
 	/* If the endpoint is in the SHUTDOWN-ACK-SENT state and recognizes
 	 * the peer has restarted (Action A), it MUST NOT setup a new
@@ -1828,6 +1833,9 @@ static sctp_disposition_t sctp_sf_do_dup
 			       GFP_ATOMIC))
 		goto nomem;
 
+	if (!sctp_auth_chunk_verify(net, chunk, new_asoc))
+		return SCTP_DISPOSITION_DISCARD;
+
 	/* Update the content of current association.  */
 	sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
 	sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
@@ -1920,6 +1928,9 @@ static sctp_disposition_t sctp_sf_do_dup
 	 * a COOKIE ACK.
 	 */
 
+	if (!sctp_auth_chunk_verify(net, chunk, asoc))
+		return SCTP_DISPOSITION_DISCARD;
+
 	/* Don't accidentally move back into established state. */
 	if (asoc->state < SCTP_STATE_ESTABLISHED) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
@@ -3985,10 +3996,8 @@ gen_shutdown:
  *
  * The return value is the disposition of the chunk.
  */
-static sctp_ierror_t sctp_sf_authenticate(struct net *net,
-				    const struct sctp_endpoint *ep,
+static sctp_ierror_t sctp_sf_authenticate(
 				    const struct sctp_association *asoc,
-				    const sctp_subtype_t type,
 				    struct sctp_chunk *chunk)
 {
 	struct sctp_authhdr *auth_hdr;
@@ -4087,7 +4096,7 @@ sctp_disposition_t sctp_sf_eat_auth(stru
 						  commands);
 
 	auth_hdr = (struct sctp_authhdr *)chunk->skb->data;
-	error = sctp_sf_authenticate(net, ep, asoc, type, chunk);
+	error = sctp_sf_authenticate(asoc, chunk);
 	switch (error) {
 	case SCTP_IERROR_AUTH_BAD_HMAC:
 		/* Generate the ERROR chunk and discard the rest

[PATCH 3.18 18/45] lockd: lost rollback of set_grace_period() in lockd_down_net()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasily Averin <vvs@virtuozzo.com>

commit 3a2b19d1ee5633f76ae8a88da7bc039a5d1732aa upstream.

Commit efda760fe95ea ("lockd: fix lockd shutdown race") is incorrect,
it removes lockd_manager and disarm grace_period_end for init_net only.

If nfsd was started from another net namespace lockd_up_net() calls
set_grace_period() that adds lockd_manager into per-netns list
and queues grace_period_end delayed work.

These action should be reverted in lockd_down_net().
Otherwise it can lead to double list_add on after restart nfsd in netns,
and to use-after-free if non-disarmed delayed work will be executed after netns destroy.

Fixes: efda760fe95e ("lockd: fix lockd shutdown race")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/svc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -271,6 +271,8 @@ static void lockd_down_net(struct svc_se
 	if (ln->nlmsvc_users) {
 		if (--ln->nlmsvc_users == 0) {
 			nlm_shutdown_hosts_net(net);
+			cancel_delayed_work_sync(&ln->grace_period_end);
+			locks_end_grace(&ln->lockd_manager);
 			svc_shutdown_net(serv, net);
 			dprintk("lockd_down_net: per-net data destroyed; net=%p\n", net);
 		}

[PATCH 3.18 19/45] Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 2ebf343cbed76773563223761586fd5edcd0dc61 which was
commit 79935915300c5eb88a0e94fa9148a7505c14a02a upstream.

As Ben points out:
	This depends on:

	commit 570c70a60f53ca737ead4e5966c446bf0d39fac9
	Author: Fabio Estevam <fabio.estevam@nxp.com>
	Date:   Wed Apr 5 11:32:34 2017 -0300

	    ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed

which did not show up until 4.13, so this makes no sense to have in this
stable branch.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -86,7 +86,6 @@
 		clocks = <&clks 201>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
 	};
 };
 

[PATCH 3.18 20/45] l2tp: revert "l2tp: fix missing print session offset info"

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Chapman <jchapman@katalix.com>

commit de3b58bc359a861d5132300f53f95e83f71954b3 upstream.

Revert commit 820da5357572 ("l2tp: fix missing print session offset
info").  The peer_offset parameter is removed.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/l2tp/l2tp_netlink.c |    2 --
 1 file changed, 2 deletions(-)

--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -633,8 +633,6 @@ static int l2tp_nl_session_send(struct s
 
 	if ((session->ifname[0] &&
 	     nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
-	    (session->offset &&
-	     nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) ||
 	    (session->cookie_len &&
 	     nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
 		     &session->cookie[0])) ||

[PATCH 3.18 21/45] pipe: cap initial pipe capacity according to pipe-max-size limit

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>

commit 086e774a57fba4695f14383c0818994c0b31da7c upstream.

This is a patch that provides behavior that is more consistent, and
probably less surprising to users. I consider the change optional, and
welcome opinions about whether it should be applied.

By default, pipes are created with a capacity of 64 kiB.  However,
/proc/sys/fs/pipe-max-size may be set smaller than this value.  In this
scenario, an unprivileged user could thus create a pipe whose initial
capacity exceeds the limit. Therefore, it seems logical to cap the
initial pipe capacity according to the value of pipe-max-size.

The test program shown earlier in this patch series can be used to
demonstrate the effect of the change brought about with this patch:

    # cat /proc/sys/fs/pipe-max-size
    1048576
    # sudo -u mtk ./test_F_SETPIPE_SZ 1
    Initial pipe capacity: 65536
    # echo 10000 > /proc/sys/fs/pipe-max-size
    # cat /proc/sys/fs/pipe-max-size
    16384
    # sudo -u mtk ./test_F_SETPIPE_SZ 1
    Initial pipe capacity: 16384
    # ./test_F_SETPIPE_SZ 1
    Initial pipe capacity: 65536

The last two executions of 'test_F_SETPIPE_SZ' show that pipe-max-size
caps the initial allocation for a new pipe for unprivileged users, but
not for privileged users.

Link: http://lkml.kernel.org/r/31dc7064-2a17-9c5b-1df1-4e3012ee992c@gmail.com
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: <socketpair@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Jens Axboe <axboe@fb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pipe.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -618,6 +618,9 @@ struct pipe_inode_info *alloc_pipe_info(
 		unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
 		struct user_struct *user = get_current_user();
 
+		if (pipe_bufs * PAGE_SIZE > pipe_max_size && !capable(CAP_SYS_RESOURCE))
+			pipe_bufs = pipe_max_size >> PAGE_SHIFT;
+
 		if (!too_many_pipe_buffers_hard(user)) {
 			if (too_many_pipe_buffers_soft(user))
 				pipe_bufs = 1;

[PATCH 3.18 22/45] kernel/exit.c: avoid undefined behaviour when calling wait4()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: zhongjiang <zhongjiang@huawei.com>

commit dd83c161fbcc5d8be637ab159c0de015cbff5ba4 upstream.

wait4(-2147483648, 0x20, 0, 0xdd0000) triggers:
UBSAN: Undefined behaviour in kernel/exit.c:1651:9

The related calltrace is as follows:

  negation of -2147483648 cannot be represented in type 'int':
  CPU: 9 PID: 16482 Comm: zj Tainted: G    B          ---- -------   3.10.0-327.53.58.71.x86_64+ #66
  Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA              , BIOS CTSAV036 04/27/2011
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SyS_wait4+0x1cb/0x1e0
    system_call_fastpath+0x16/0x1b

Exclude the overflow to avoid the UBSAN warning.

Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/exit.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1620,6 +1620,10 @@ SYSCALL_DEFINE4(wait4, pid_t, upid, int
 			__WNOTHREAD|__WCLONE|__WALL))
 		return -EINVAL;
 
+	/* -INT_MIN is not defined */
+	if (upid == INT_MIN)
+		return -ESRCH;
+
 	if (upid == -1)
 		type = PIDTYPE_MAX;
 	else if (upid < 0) {

[PATCH 3.18 23/45] usbip: usbip_host: refine probe and disconnect debug msgs to be useful

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan <shuahkh@osg.samsung.com>

commit 28b68acc4a88dcf91fd1dcf2577371dc9bf574cc upstream.

Refine probe and disconnect debug msgs to be useful and say what is
in progress.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -317,7 +317,7 @@ static int stub_probe(struct usb_device
 	struct bus_id_priv *busid_priv;
 	int rc;
 
-	dev_dbg(&udev->dev, "Enter\n");
+	dev_dbg(&udev->dev, "Enter probe\n");
 
 	/* check we should claim or not by busid_table */
 	busid_priv = get_busid_priv(udev_busid);
@@ -415,7 +415,7 @@ static void stub_disconnect(struct usb_d
 	struct bus_id_priv *busid_priv;
 	int rc;
 
-	dev_dbg(&udev->dev, "Enter\n");
+	dev_dbg(&udev->dev, "Enter disconnect\n");
 
 	busid_priv = get_busid_priv(udev_busid);
 	if (!busid_priv) {

[PATCH 3.18 24/45] usbip: usbip_host: delete device from busid_table after rebind

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan (Samsung OSG) <shuah@kernel.org>

commit 1e180f167d4e413afccbbb4a421b48b2de832549 upstream.

Device is left in the busid_table after unbind and rebind. Rebind
initiates usb bus scan and the original driver claims the device.
After rescan the device should be deleted from the busid_table as
it no longer belongs to usbip_host.

Fix it to delete the device after device_attach() succeeds.

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_main.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -201,6 +201,9 @@ static ssize_t rebind_store(struct devic
 	if (!bid)
 		return -ENODEV;
 
+	/* mark the device for deletion so probe ignores it during rescan */
+	bid->status = STUB_BUSID_OTHER;
+
 	/* device_attach() callers should hold parent lock for USB */
 	if (bid->udev->dev.parent)
 		device_lock(bid->udev->dev.parent);
@@ -212,6 +215,9 @@ static ssize_t rebind_store(struct devic
 		return ret;
 	}
 
+	/* delete device from busid_table */
+	del_match_busid((char *) buf);
+
 	return count;
 }
 

[PATCH 3.18 25/45] usbip: usbip_host: run rebind from exit when module is removed

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan (Samsung OSG) <shuah@kernel.org>

commit 7510df3f29d44685bab7b1918b61a8ccd57126a9 upstream.

After removing usbip_host module, devices it releases are left without
a driver. For example, when a keyboard or a mass storage device are
bound to usbip_host when it is removed, these devices are no longer
bound to any driver.

Fix it to run device_attach() from the module exit routine to restore
the devices to their original drivers. This includes cleanup changes
and moving device_attach() code to a common routine to be called from
rebind_store() and usbip_host_exit().

Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c  |    6 ----
 drivers/usb/usbip/stub_main.c |   60 +++++++++++++++++++++++++++++++++++-------
 2 files changed, 52 insertions(+), 14 deletions(-)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -459,12 +459,8 @@ static void stub_disconnect(struct usb_d
 	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
 
-	if (busid_priv->status == STUB_BUSID_ALLOC) {
+	if (busid_priv->status == STUB_BUSID_ALLOC)
 		busid_priv->status = STUB_BUSID_ADDED;
-	} else {
-		busid_priv->status = STUB_BUSID_OTHER;
-		del_match_busid((char *)udev_busid);
-	}
 }
 
 #ifdef CONFIG_PM
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -28,6 +28,7 @@
 #define DRIVER_DESC "USB/IP Host Driver"
 
 struct kmem_cache *stub_priv_cache;
+
 /*
  * busid_tables defines matching busids that usbip can grab. A user can change
  * dynamically what device is locally used and what device is exported to a
@@ -184,6 +185,51 @@ static ssize_t store_match_busid(struct
 static DRIVER_ATTR(match_busid, S_IRUSR | S_IWUSR, show_match_busid,
 		   store_match_busid);
 
+static int do_rebind(char *busid, struct bus_id_priv *busid_priv)
+{
+	int ret;
+
+	/* device_attach() callers should hold parent lock for USB */
+	if (busid_priv->udev->dev.parent)
+		device_lock(busid_priv->udev->dev.parent);
+	ret = device_attach(&busid_priv->udev->dev);
+	if (busid_priv->udev->dev.parent)
+		device_unlock(busid_priv->udev->dev.parent);
+	if (ret < 0) {
+		dev_err(&busid_priv->udev->dev, "rebind failed\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void stub_device_rebind(void)
+{
+#if IS_MODULE(CONFIG_USBIP_HOST)
+	struct bus_id_priv *busid_priv;
+	int i;
+
+	/* update status to STUB_BUSID_OTHER so probe ignores the device */
+	spin_lock(&busid_table_lock);
+	for (i = 0; i < MAX_BUSID; i++) {
+		if (busid_table[i].name[0] &&
+		    busid_table[i].shutdown_busid) {
+			busid_priv = &(busid_table[i]);
+			busid_priv->status = STUB_BUSID_OTHER;
+		}
+	}
+	spin_unlock(&busid_table_lock);
+
+	/* now run rebind */
+	for (i = 0; i < MAX_BUSID; i++) {
+		if (busid_table[i].name[0] &&
+		    busid_table[i].shutdown_busid) {
+			busid_priv = &(busid_table[i]);
+			do_rebind(busid_table[i].name, busid_priv);
+		}
+	}
+#endif
+}
+
 static ssize_t rebind_store(struct device_driver *dev, const char *buf,
 				 size_t count)
 {
@@ -204,16 +250,9 @@ static ssize_t rebind_store(struct devic
 	/* mark the device for deletion so probe ignores it during rescan */
 	bid->status = STUB_BUSID_OTHER;
 
-	/* device_attach() callers should hold parent lock for USB */
-	if (bid->udev->dev.parent)
-		device_lock(bid->udev->dev.parent);
-	ret = device_attach(&bid->udev->dev);
-	if (bid->udev->dev.parent)
-		device_unlock(bid->udev->dev.parent);
-	if (ret < 0) {
-		dev_err(&bid->udev->dev, "rebind failed\n");
+	ret = do_rebind((char *) buf, bid);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* delete device from busid_table */
 	del_match_busid((char *) buf);
@@ -339,6 +378,9 @@ static void __exit usbip_host_exit(void)
 	 */
 	usb_deregister_device_driver(&stub_driver);
 
+	/* initiate scan to attach devices */
+	stub_device_rebind();
+
 	kmem_cache_destroy(stub_priv_cache);
 }
 

[PATCH 3.18 26/45] usbip: fix error handling in stub_probe()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit 3ff67445750a84de67faaf52c6e1895cb09f2c56 upstream.

If usb_hub_claim_port() fails, no resources are deallocated and
if stub_add_files() fails, port is not released.

The patch fixes these issues and rearranges error handling code.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c |   26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -313,7 +313,6 @@ static int stub_probe(struct usb_device
 {
 	struct stub_device *sdev = NULL;
 	const char *udev_busid = dev_name(&udev->dev);
-	int err = 0;
 	struct bus_id_priv *busid_priv;
 	int rc;
 
@@ -374,23 +373,28 @@ static int stub_probe(struct usb_device
 			(struct usb_dev_state *) udev);
 	if (rc) {
 		dev_dbg(&udev->dev, "unable to claim port\n");
-		return rc;
+		goto err_port;
 	}
 
-	err = stub_add_files(&udev->dev);
-	if (err) {
+	rc = stub_add_files(&udev->dev);
+	if (rc) {
 		dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid);
-		dev_set_drvdata(&udev->dev, NULL);
-		usb_put_dev(udev);
-		kthread_stop_put(sdev->ud.eh);
-
-		busid_priv->sdev = NULL;
-		stub_device_free(sdev);
-		return err;
+		goto err_files;
 	}
 	busid_priv->status = STUB_BUSID_ALLOC;
 
 	return 0;
+err_files:
+	usb_hub_release_port(udev->parent, udev->portnum,
+			     (struct usb_dev_state *) udev);
+err_port:
+	dev_set_drvdata(&udev->dev, NULL);
+	usb_put_dev(udev);
+	kthread_stop_put(sdev->ud.eh);
+
+	busid_priv->sdev = NULL;
+	stub_device_free(sdev);
+	return rc;
 }
 
 static void shutdown_busid(struct bus_id_priv *busid_priv)

[PATCH 3.18 27/45] usbip: usbip_host: fix NULL-ptr deref and use-after-free errors

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan (Samsung OSG) <shuah@kernel.org>

commit 22076557b07c12086eeb16b8ce2b0b735f7a27e7 upstream.

usbip_host updates device status without holding lock from stub probe,
disconnect and rebind code paths. When multiple requests to import a
device are received, these unprotected code paths step all over each
other and drive fails with NULL-ptr deref and use-after-free errors.

The driver uses a table lock to protect the busid array for adding and
deleting busids to the table. However, the probe, disconnect and rebind
paths get the busid table entry and update the status without holding
the busid table lock. Add a new finer grain lock to protect the busid
entry. This new lock will be held to search and update the busid entry
fields from get_busid_idx(), add_match_busid() and del_match_busid().

match_busid_show() does the same to access the busid entry fields.

get_busid_priv() changed to return the pointer to the busid entry holding
the busid lock. stub_probe(), stub_disconnect() and stub_device_rebind()
call put_busid_priv() to release the busid lock before returning. This
changes fixes the unprotected code paths eliminating the race conditions
in updating the busid entries.

Reported-by: Jakub Jirasek
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub.h      |    2 ++
 drivers/usb/usbip/stub_dev.c  |   33 +++++++++++++++++++++++----------
 drivers/usb/usbip/stub_main.c |   40 +++++++++++++++++++++++++++++++++++-----
 3 files changed, 60 insertions(+), 15 deletions(-)

--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -88,6 +88,7 @@ struct bus_id_priv {
 	struct stub_device *sdev;
 	struct usb_device *udev;
 	char shutdown_busid;
+	spinlock_t busid_lock;
 };
 
 /* stub_priv is allocated from stub_priv_cache */
@@ -98,6 +99,7 @@ extern struct usb_device_driver stub_dri
 
 /* stub_main.c */
 struct bus_id_priv *get_busid_priv(const char *busid);
+void put_busid_priv(struct bus_id_priv *bid);
 int del_match_busid(char *busid);
 void stub_device_cleanup_urbs(struct stub_device *sdev);
 
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -314,7 +314,7 @@ static int stub_probe(struct usb_device
 	struct stub_device *sdev = NULL;
 	const char *udev_busid = dev_name(&udev->dev);
 	struct bus_id_priv *busid_priv;
-	int rc;
+	int rc = 0;
 
 	dev_dbg(&udev->dev, "Enter probe\n");
 
@@ -331,13 +331,15 @@ static int stub_probe(struct usb_device
 		 * other matched drivers by the driver core.
 		 * See driver_probe_device() in driver/base/dd.c
 		 */
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
 		dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
 			 udev_busid);
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
@@ -345,13 +347,16 @@ static int stub_probe(struct usb_device
 			"%s is attached on vhci_hcd... skip!\n",
 			udev_busid);
 
-		return -ENODEV;
+		rc = -ENODEV;
+		goto call_put_busid_priv;
 	}
 
 	/* ok, this is my device */
 	sdev = stub_device_alloc(udev);
-	if (!sdev)
-		return -ENOMEM;
+	if (!sdev) {
+		rc = -ENOMEM;
+		goto call_put_busid_priv;
+	}
 
 	dev_info(&udev->dev,
 		"usbip-host: register new device (bus %u dev %u)\n",
@@ -383,7 +388,9 @@ static int stub_probe(struct usb_device
 	}
 	busid_priv->status = STUB_BUSID_ALLOC;
 
-	return 0;
+	rc = 0;
+	goto call_put_busid_priv;
+
 err_files:
 	usb_hub_release_port(udev->parent, udev->portnum,
 			     (struct usb_dev_state *) udev);
@@ -394,6 +401,9 @@ err_port:
 
 	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
+
+call_put_busid_priv:
+	put_busid_priv(busid_priv);
 	return rc;
 }
 
@@ -432,7 +442,7 @@ static void stub_disconnect(struct usb_d
 	/* get stub_device */
 	if (!sdev) {
 		dev_err(&udev->dev, "could not get device");
-		return;
+		goto call_put_busid_priv;
 	}
 
 	dev_set_drvdata(&udev->dev, NULL);
@@ -447,12 +457,12 @@ static void stub_disconnect(struct usb_d
 				  (struct usb_dev_state *) udev);
 	if (rc) {
 		dev_dbg(&udev->dev, "unable to release port\n");
-		return;
+		goto call_put_busid_priv;
 	}
 
 	/* If usb reset is called from event handler */
 	if (busid_priv->sdev->ud.eh == current)
-		return;
+		goto call_put_busid_priv;
 
 	/* shutdown the current connection */
 	shutdown_busid(busid_priv);
@@ -465,6 +475,9 @@ static void stub_disconnect(struct usb_d
 
 	if (busid_priv->status == STUB_BUSID_ALLOC)
 		busid_priv->status = STUB_BUSID_ADDED;
+
+call_put_busid_priv:
+	put_busid_priv(busid_priv);
 }
 
 #ifdef CONFIG_PM
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -40,6 +40,8 @@ static spinlock_t busid_table_lock;
 
 static void init_busid_table(void)
 {
+	int i;
+
 	/*
 	 * This also sets the bus_table[i].status to
 	 * STUB_BUSID_OTHER, which is 0.
@@ -47,6 +49,9 @@ static void init_busid_table(void)
 	memset(busid_table, 0, sizeof(busid_table));
 
 	spin_lock_init(&busid_table_lock);
+
+	for (i = 0; i < MAX_BUSID; i++)
+		spin_lock_init(&busid_table[i].busid_lock);
 }
 
 /*
@@ -58,15 +63,20 @@ static int get_busid_idx(const char *bus
 	int i;
 	int idx = -1;
 
-	for (i = 0; i < MAX_BUSID; i++)
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
 		if (busid_table[i].name[0])
 			if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
 				idx = i;
+				spin_unlock(&busid_table[i].busid_lock);
 				break;
 			}
+		spin_unlock(&busid_table[i].busid_lock);
+	}
 	return idx;
 }
 
+/* Returns holding busid_lock. Should call put_busid_priv() to unlock */
 struct bus_id_priv *get_busid_priv(const char *busid)
 {
 	int idx;
@@ -74,13 +84,21 @@ struct bus_id_priv *get_busid_priv(const
 
 	spin_lock(&busid_table_lock);
 	idx = get_busid_idx(busid);
-	if (idx >= 0)
+	if (idx >= 0) {
 		bid = &(busid_table[idx]);
+		/* get busid_lock before returning */
+		spin_lock(&bid->busid_lock);
+	}
 	spin_unlock(&busid_table_lock);
 
 	return bid;
 }
 
+void put_busid_priv(struct bus_id_priv *bid)
+{
+	spin_unlock(&bid->busid_lock);
+}
+
 static int add_match_busid(char *busid)
 {
 	int i;
@@ -93,15 +111,19 @@ static int add_match_busid(char *busid)
 		goto out;
 	}
 
-	for (i = 0; i < MAX_BUSID; i++)
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
 		if (!busid_table[i].name[0]) {
 			strlcpy(busid_table[i].name, busid, BUSID_SIZE);
 			if ((busid_table[i].status != STUB_BUSID_ALLOC) &&
 			    (busid_table[i].status != STUB_BUSID_REMOV))
 				busid_table[i].status = STUB_BUSID_ADDED;
 			ret = 0;
+			spin_unlock(&busid_table[i].busid_lock);
 			break;
 		}
+		spin_unlock(&busid_table[i].busid_lock);
+	}
 
 out:
 	spin_unlock(&busid_table_lock);
@@ -122,6 +144,8 @@ int del_match_busid(char *busid)
 	/* found */
 	ret = 0;
 
+	spin_lock(&busid_table[idx].busid_lock);
+
 	if (busid_table[idx].status == STUB_BUSID_OTHER)
 		memset(busid_table[idx].name, 0, BUSID_SIZE);
 
@@ -129,6 +153,7 @@ int del_match_busid(char *busid)
 	    (busid_table[idx].status != STUB_BUSID_ADDED))
 		busid_table[idx].status = STUB_BUSID_REMOV;
 
+	spin_unlock(&busid_table[idx].busid_lock);
 out:
 	spin_unlock(&busid_table_lock);
 
@@ -141,9 +166,12 @@ static ssize_t show_match_busid(struct d
 	char *out = buf;
 
 	spin_lock(&busid_table_lock);
-	for (i = 0; i < MAX_BUSID; i++)
+	for (i = 0; i < MAX_BUSID; i++) {
+		spin_lock(&busid_table[i].busid_lock);
 		if (busid_table[i].name[0])
 			out += sprintf(out, "%s ", busid_table[i].name);
+		spin_unlock(&busid_table[i].busid_lock);
+	}
 	spin_unlock(&busid_table_lock);
 	out += sprintf(out, "\n");
 
@@ -219,7 +247,7 @@ static void stub_device_rebind(void)
 	}
 	spin_unlock(&busid_table_lock);
 
-	/* now run rebind */
+	/* now run rebind - no need to hold locks. driver files are removed */
 	for (i = 0; i < MAX_BUSID; i++) {
 		if (busid_table[i].name[0] &&
 		    busid_table[i].shutdown_busid) {
@@ -249,6 +277,8 @@ static ssize_t rebind_store(struct devic
 
 	/* mark the device for deletion so probe ignores it during rescan */
 	bid->status = STUB_BUSID_OTHER;
+	/* release the busid lock */
+	put_busid_priv(bid);
 
 	ret = do_rebind((char *) buf, bid);
 	if (ret < 0)

[PATCH 3.18 28/45] usbip: usbip_host: fix bad unlock balance during stub_probe()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan (Samsung OSG) <shuah@kernel.org>

commit c171654caa875919be3c533d3518da8be5be966e upstream.

stub_probe() calls put_busid_priv() in an error path when device isn't
found in the busid_table. Fix it by making put_busid_priv() safe to be
called with null struct bus_id_priv pointer.

This problem happens when "usbip bind" is run without loading usbip_host
driver and then running modprobe. The first failed bind attempt unbinds
the device from the original driver and when usbip_host is modprobed,
stub_probe() runs and doesn't find the device in its busid table and calls
put_busid_priv(0 with null bus_id_priv pointer.

usbip-host 3-10.2: 3-10.2 is not in match_busid table...  skip!

[  367.359679] =====================================
[  367.359681] WARNING: bad unlock balance detected!
[  367.359683] 4.17.0-rc4+ #5 Not tainted
[  367.359685] -------------------------------------
[  367.359688] modprobe/2768 is trying to release lock (
[  367.359689]
==================================================================
[  367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110
[  367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768

[  367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5

Fixes: 22076557b07c ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -96,7 +96,8 @@ struct bus_id_priv *get_busid_priv(const
 
 void put_busid_priv(struct bus_id_priv *bid)
 {
-	spin_unlock(&bid->busid_lock);
+	if (bid)
+		spin_unlock(&bid->busid_lock);
 }
 
 static int add_match_busid(char *busid)

[PATCH 3.18 29/45] ALSA: usb: mixer: volume quirk for CM102-A+/102S+

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Federico Cuello <fedux@fedux.com.ar>

commit 21493316a3c4598f308d5a9fa31cc74639c4caff upstream.

Currently it's not possible to set volume lower than 26% (it just mutes).

Also fixes this warning:

  Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
  [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1

, and volume works fine for full range.

Signed-off-by: Federico Cuello <fedux@fedux.com.ar>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -883,6 +883,14 @@ static void volume_control_quirks(struct
 		}
 		break;
 
+	case USB_ID(0x0d8c, 0x0103):
+		if (!strcmp(kctl->id.name, "PCM Playback Volume")) {
+			usb_audio_info(chip,
+				 "set volume quirk for CM102-A+/102S+\n");
+			cval->min = -256;
+		}
+		break;
+
 	case USB_ID(0x0471, 0x0101):
 	case USB_ID(0x0471, 0x0104):
 	case USB_ID(0x0471, 0x0105):

[PATCH 3.18 30/45] ALSA: control: fix a redundant-copy issue

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wenwen Wang <wang6495@umn.edu>

commit 3f12888dfae2a48741c4caa9214885b3aaf350f9 upstream.

In snd_ctl_elem_add_compat(), the fields of the struct 'data' need to be
copied from the corresponding fields of the struct 'data32' in userspace.
This is achieved by invoking copy_from_user() and get_user() functions. The
problem here is that the 'type' field is copied twice. One is by
copy_from_user() and one is by get_user(). Given that the 'type' field is
not used between the two copies, the second copy is *completely* redundant
and should be removed for better performance and cleanup. Also, these two
copies can cause inconsistent data: as the struct 'data32' resides in
userspace and a malicious userspace process can race to change the 'type'
field between the two copies to cause inconsistent data. Depending on how
the data is used in the future, such an inconsistency may cause potential
security risks.

For above reasons, we should take out the second copy.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/control_compat.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/core/control_compat.c
+++ b/sound/core/control_compat.c
@@ -400,8 +400,7 @@ static int snd_ctl_elem_add_compat(struc
 	if (copy_from_user(&data->id, &data32->id, sizeof(data->id)) ||
 	    copy_from_user(&data->type, &data32->type, 3 * sizeof(u32)))
 		goto error;
-	if (get_user(data->owner, &data32->owner) ||
-	    get_user(data->type, &data32->type))
+	if (get_user(data->owner, &data32->owner))
 		goto error;
 	switch (data->type) {
 	case SNDRV_CTL_ELEM_TYPE_BOOLEAN:

[PATCH 3.18 31/45] powerpc: Dont preempt_disable() in show_cpuinfo()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit 349524bc0da698ec77f2057cf4a4948eb6349265 upstream.

This causes warnings from cpufreq mutex code. This is also rather
unnecessary and ineffective. If we really want to prevent concurrent
unplug, we could take the unplug read lock but I don't see this being
critical.

Fixes: cd77b5ce208c ("powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/setup-common.c |   11 -----------
 1 file changed, 11 deletions(-)

--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -217,14 +217,6 @@ static int show_cpuinfo(struct seq_file
 	unsigned short maj;
 	unsigned short min;
 
-	/* We only show online cpus: disable preempt (overzealous, I
-	 * knew) to prevent cpu going down. */
-	preempt_disable();
-	if (!cpu_online(cpu_id)) {
-		preempt_enable();
-		return 0;
-	}
-
 #ifdef CONFIG_SMP
 	pvr = per_cpu(cpu_pvr, cpu_id);
 #else
@@ -329,9 +321,6 @@ static int show_cpuinfo(struct seq_file
 #ifdef CONFIG_SMP
 	seq_printf(m, "\n");
 #endif
-
-	preempt_enable();
-
 	/* If this is the last cpu, print the summary */
 	if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
 		show_cpuinfo_summary(m);

[PATCH 3.18 32/45] tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 45dd9b0666a162f8e4be76096716670cf1741f0e upstream.

Doing an audit of trace events, I discovered two trace events in the xen
subsystem that use a hack to create zero data size trace events. This is not
what trace events are for. Trace events add memory footprint overhead, and
if all you need to do is see if a function is hit or not, simply make that
function noinline and use function tracer filtering.

Worse yet, the hack used was:

 __array(char, x, 0)

Which creates a static string of zero in length. There's assumptions about
such constructs in ftrace that this is a dynamic string that is nul
terminated. This is not the case with these tracepoints and can cause
problems in various parts of ftrace.

Nuke the trace events!

Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 95a7d76897c1e ("xen/mmu: Use Xen specific TLB flush instead of the generic one.")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/mmu.c         |    4 ----
 include/trace/events/xen.h |   16 ----------------
 2 files changed, 20 deletions(-)

--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1246,8 +1246,6 @@ void xen_flush_tlb_all(void)
 	struct mmuext_op *op;
 	struct multicall_space mcs;
 
-	trace_xen_mmu_flush_tlb_all(0);
-
 	preempt_disable();
 
 	mcs = xen_mc_entry(sizeof(*op));
@@ -1265,8 +1263,6 @@ static void xen_flush_tlb(void)
 	struct mmuext_op *op;
 	struct multicall_space mcs;
 
-	trace_xen_mmu_flush_tlb(0);
-
 	preempt_disable();
 
 	mcs = xen_mc_entry(sizeof(*op));
--- a/include/trace/events/xen.h
+++ b/include/trace/events/xen.h
@@ -377,22 +377,6 @@ DECLARE_EVENT_CLASS(xen_mmu_pgd,
 DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin);
 DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin);
 
-TRACE_EVENT(xen_mmu_flush_tlb_all,
-	    TP_PROTO(int x),
-	    TP_ARGS(x),
-	    TP_STRUCT__entry(__array(char, x, 0)),
-	    TP_fast_assign((void)x),
-	    TP_printk("%s", "")
-	);
-
-TRACE_EVENT(xen_mmu_flush_tlb,
-	    TP_PROTO(int x),
-	    TP_ARGS(x),
-	    TP_STRUCT__entry(__array(char, x, 0)),
-	    TP_fast_assign((void)x),
-	    TP_printk("%s", "")
-	);
-
 TRACE_EVENT(xen_mmu_flush_tlb_single,
 	    TP_PROTO(unsigned long addr),
 	    TP_ARGS(addr),

[PATCH 3.18 33/45] powerpc/powernv: Fix NVRAM sleep in invalid context when crashing

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Piggin <npiggin@gmail.com>

commit c1d2a31397ec51f0370f6bd17b19b39152c263cb upstream.

Similarly to opal_event_shutdown, opal_nvram_write can be called in
the crash path with irqs disabled. Special case the delay to avoid
sleeping in invalid context.

Fixes: 3b8070335f75 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops")
Cc: stable@vger.kernel.org # v3.2
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/opal-nvram.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/arch/powerpc/platforms/powernv/opal-nvram.c
+++ b/arch/powerpc/platforms/powernv/opal-nvram.c
@@ -43,6 +43,10 @@ static ssize_t opal_nvram_read(char *buf
 	return count;
 }
 
+/*
+ * This can be called in the panic path with interrupts off, so use
+ * mdelay in that case.
+ */
 static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	s64 rc = OPAL_BUSY;
@@ -57,10 +61,16 @@ static ssize_t opal_nvram_write(char *bu
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_write_nvram(__pa(buf), count, off);
 		if (rc == OPAL_BUSY_EVENT) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 			opal_poll_events(NULL);
 		} else if (rc == OPAL_BUSY) {
-			msleep(OPAL_BUSY_DELAY_MS);
+			if (in_interrupt() || irqs_disabled())
+				mdelay(OPAL_BUSY_DELAY_MS);
+			else
+				msleep(OPAL_BUSY_DELAY_MS);
 		}
 	}
 

[PATCH 3.18 34/45] efi: Avoid potential crashes, fix the struct efi_pci_io_protocol_32 definition for mixed mode

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 0b3225ab9407f557a8e20f23f37aa7236c10a9b1 upstream.

Mixed mode allows a kernel built for x86_64 to interact with 32-bit
EFI firmware, but requires us to define all struct definitions carefully
when it comes to pointer sizes.

'struct efi_pci_io_protocol_32' currently uses a 'void *' for the
'romimage' field, which will be interpreted as a 64-bit field
on such kernels, potentially resulting in bogus memory references
and subsequent crashes.

Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180504060003.19618-13-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/boot/compressed/eboot.c |    6 ++++--
 include/linux/efi.h              |    8 ++++----
 2 files changed, 8 insertions(+), 6 deletions(-)

--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -365,7 +365,8 @@ __setup_efi_pci32(efi_pci_io_protocol_32
 	if (status != EFI_SUCCESS)
 		goto free_struct;
 
-	memcpy(rom->romdata, pci->romimage, pci->romsize);
+	memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
+	       pci->romsize);
 	return status;
 
 free_struct:
@@ -471,7 +472,8 @@ __setup_efi_pci64(efi_pci_io_protocol_64
 	if (status != EFI_SUCCESS)
 		goto free_struct;
 
-	memcpy(rom->romdata, pci->romimage, pci->romsize);
+	memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
+	       pci->romsize);
 	return status;
 
 free_struct:
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -360,8 +360,8 @@ typedef struct {
 	u32 attributes;
 	u32 get_bar_attributes;
 	u32 set_bar_attributes;
-	uint64_t romsize;
-	void *romimage;
+	u64 romsize;
+	u32 romimage;
 } efi_pci_io_protocol_32;
 
 typedef struct {
@@ -380,8 +380,8 @@ typedef struct {
 	u64 attributes;
 	u64 get_bar_attributes;
 	u64 set_bar_attributes;
-	uint64_t romsize;
-	void *romimage;
+	u64 romsize;
+	u64 romimage;
 } efi_pci_io_protocol_64;
 
 typedef struct {

[PATCH 3.18 35/45] ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit eb0146daefdde65665b7f076fbff7b49dade95b9 upstream.

Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.

Fixes: 24ba613c9d6c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/traps.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,6 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
+#include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/bug.h>
@@ -395,7 +396,8 @@ void unregister_undef_hook(struct undef_
 	raw_spin_unlock_irqrestore(&undef_lock, flags);
 }
 
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+static nokprobe_inline
+int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 {
 	struct undef_hook *hook;
 	unsigned long flags;
@@ -468,6 +470,7 @@ die_sig:
 
 	arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
 }
+NOKPROBE_SYMBOL(do_undefinstr)
 
 /*
  * Handle FIQ similarly to NMI on x86 systems.

[PATCH 3.18 36/45] tick/broadcast: Use for_each_cpu() specially on UP kernels

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dexuan Cui <decui@microsoft.com>

commit 5596fe34495cf0f645f417eb928ef224df3e3cb4 upstream.

for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.

Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.

[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/tick-broadcast.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -585,6 +585,14 @@ again:
 	now = ktime_get();
 	/* Find all expired events */
 	for_each_cpu(cpu, tick_broadcast_oneshot_mask) {
+		/*
+		 * Required for !SMP because for_each_cpu() reports
+		 * unconditionally CPU0 as set on UP kernels.
+		 */
+		if (!IS_ENABLED(CONFIG_SMP) &&
+		    cpumask_empty(tick_broadcast_oneshot_mask))
+			break;
+
 		td = &per_cpu(tick_cpu_device, cpu);
 		if (td->evtdev->next_event.tv64 <= now.tv64) {
 			cpumask_set_cpu(cpu, tmpmask);

[PATCH 3.18 37/45] ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 0d73c3f8e7f6ee2aab1bb350f60c180f5ae21a2c upstream.

Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.

Fixes: 24ba613c9d6c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/assembler.h |   10 ++++++++++
 arch/arm/lib/getuser.S           |   10 ++++++++++
 2 files changed, 20 insertions(+)

--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -448,4 +448,14 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry)				\
+	.pushsection "_kprobe_blacklist", "aw" ;	\
+	.balign 4 ;					\
+	.long entry;					\
+	.popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
 #endif /* __ASM_ASSEMBLER_H__ */
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -38,6 +38,7 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
+_ASM_NOKPROBE(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -58,6 +59,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
+_ASM_NOKPROBE(__get_user_2)
 
 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -65,6 +67,7 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
+_ASM_NOKPROBE(__get_user_4)
 
 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad
@@ -78,6 +81,7 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
+_ASM_NOKPROBE(__get_user_8)
 
 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@@ -91,6 +95,7 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
+_ASM_NOKPROBE(__get_user_32t_8)
 
 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -98,6 +103,7 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
+_ASM_NOKPROBE(__get_user_64t_1)
 
 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -114,6 +120,7 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
+_ASM_NOKPROBE(__get_user_64t_2)
 
 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -121,6 +128,7 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
+_ASM_NOKPROBE(__get_user_64t_4)
 #endif
 
 __get_user_bad8:
@@ -131,6 +139,8 @@ __get_user_bad:
 	ret	lr
 ENDPROC(__get_user_bad)
 ENDPROC(__get_user_bad8)
+_ASM_NOKPROBE(__get_user_bad)
+_ASM_NOKPROBE(__get_user_bad8)
 
 .pushsection __ex_table, "a"
 	.long	1b, __get_user_bad

[PATCH 3.18 38/45] net: test tailroom before appending to linear skb

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit 113f99c3358564a0647d444c2ae34e8b1abfd5b9 ]

Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.

Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.

This issue predates git history.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_output.c  |    3 ++-
 net/ipv6/ip6_output.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1028,7 +1028,8 @@ alloc_new_skb:
 		if (copy > length)
 			copy = length;
 
-		if (!(rt->dst.dev->features&NETIF_F_SG)) {
+		if (!(rt->dst.dev->features&NETIF_F_SG) &&
+		    skb_tailroom(skb) >= copy) {
 			unsigned int off;
 
 			off = skb->len;
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1462,7 +1462,8 @@ alloc_new_skb:
 		if (copy > length)
 			copy = length;
 
-		if (!(rt->dst.dev->features&NETIF_F_SG)) {
+		if (!(rt->dst.dev->features&NETIF_F_SG) &&
+		    skb_tailroom(skb) >= copy) {
 			unsigned int off;
 
 			off = skb->len;

[PATCH 3.18 39/45] tcp: purge write queue in tcp_connect_init()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 7f582b248d0a86bae5788c548d7bb5bca6f7691a ]

syzkaller found a reliable way to crash the host, hitting a BUG()
in __tcp_retransmit_skb()

Malicous MSG_FASTOPEN is the root cause. We need to purge write queue
in tcp_connect_init() at the point we init snd_una/write_seq.

This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE()

kernel BUG at net/ipv4/tcp_output.c:2837!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837
RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206
RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49
RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005
RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2
R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad
R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80
FS:  0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923
 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488
 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573
 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863

Fixes: cf60af03ca4e ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2497,8 +2497,10 @@ int __tcp_retransmit_skb(struct sock *sk
 		return -EBUSY;
 
 	if (before(TCP_SKB_CB(skb)->seq, tp->snd_una)) {
-		if (before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
-			BUG();
+		if (unlikely(before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))) {
+			WARN_ON_ONCE(1);
+			return -EINVAL;
+		}
 		if (tcp_trim_head(sk, skb, tp->snd_una - TCP_SKB_CB(skb)->seq))
 			return -ENOMEM;
 	}
@@ -2989,6 +2991,7 @@ static void tcp_connect_init(struct sock
 	sock_reset_flag(sk, SOCK_DONE);
 	tp->snd_wnd = 0;
 	tcp_init_wl(tp, 0);
+	tcp_write_queue_purge(sk);
 	tp->snd_una = tp->write_seq;
 	tp->snd_sml = tp->write_seq;
 	tp->snd_up = tp->write_seq;

[PATCH 3.18 40/45] ext2: fix a block leak

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 5aa1437d2d9a068c0334bd7c9dafa8ec4f97f13b upstream.

open file, unlink it, then use ioctl(2) to make it immutable or
append only.  Now close it and watch the blocks *not* freed...

Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext2/inode.c |   10 ----------
 1 file changed, 10 deletions(-)

--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1169,21 +1169,11 @@ do_indirects:
 
 static void ext2_truncate_blocks(struct inode *inode, loff_t offset)
 {
-	/*
-	 * XXX: it seems like a bug here that we don't allow
-	 * IS_APPEND inode to have blocks-past-i_size trimmed off.
-	 * review and fix this.
-	 *
-	 * Also would be nice to be able to handle IO errors and such,
-	 * but that's probably too much to ask.
-	 */
 	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 	    S_ISLNK(inode->i_mode)))
 		return;
 	if (ext2_inode_is_fast_symlink(inode))
 		return;
-	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
-		return;
 	__ext2_truncate_blocks(inode, offset);
 }
 

[PATCH 3.18 41/45] scsi: libsas: defer ata device eh commands to libata

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Yan <yanaijie@huawei.com>

commit 318aaf34f1179b39fa9c30fa0f3288b645beee39 upstream.

When ata device doing EH, some commands still attached with tasks are
not passed to libata when abort failed or recover failed, so libata did
not handle these commands. After these commands done, sas task is freed,
but ata qc is not freed. This will cause ata qc leak and trigger a
warning like below:

WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037
ata_eh_finish+0xb4/0xcc
CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G     W  OE 4.14.0#1
......
Call trace:
[<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc
[<ffff0000088b8420>] ata_do_eh+0xc4/0xd8
[<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c
[<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694
[<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80
[<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170
[<ffff0000080ebd70>] process_one_work+0x144/0x390
[<ffff0000080ec100>] worker_thread+0x144/0x418
[<ffff0000080f2c98>] kthread+0x10c/0x138
[<ffff0000080855dc>] ret_from_fork+0x10/0x18

If ata qc leaked too many, ata tag allocation will fail and io blocked
for ever.

As suggested by Dan Williams, defer ata device commands to libata and
merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle
ata qcs correctly after this.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: Xiaofei Tan <tanxiaofei@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/libsas/sas_scsi_host.c |   33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -250,6 +250,7 @@ out_done:
 static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
 {
 	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
+	struct domain_device *dev = cmd_to_domain_dev(cmd);
 	struct sas_task *task = TO_SAS_TASK(cmd);
 
 	/* At this point, we only get called following an actual abort
@@ -258,6 +259,14 @@ static void sas_eh_finish_cmd(struct scs
 	 */
 	sas_end_task(cmd, task);
 
+	if (dev_is_sata(dev)) {
+		/* defer commands to libata so that libata EH can
+		 * handle ata qcs correctly
+		 */
+		list_move_tail(&cmd->eh_entry, &sas_ha->eh_ata_q);
+		return;
+	}
+
 	/* now finish the command and move it on to the error
 	 * handler done list, this also takes it off the
 	 * error handler pending list.
@@ -265,22 +274,6 @@ static void sas_eh_finish_cmd(struct scs
 	scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
 }
 
-static void sas_eh_defer_cmd(struct scsi_cmnd *cmd)
-{
-	struct domain_device *dev = cmd_to_domain_dev(cmd);
-	struct sas_ha_struct *ha = dev->port->ha;
-	struct sas_task *task = TO_SAS_TASK(cmd);
-
-	if (!dev_is_sata(dev)) {
-		sas_eh_finish_cmd(cmd);
-		return;
-	}
-
-	/* report the timeout to libata */
-	sas_end_task(cmd, task);
-	list_move_tail(&cmd->eh_entry, &ha->eh_ata_q);
-}
-
 static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
 {
 	struct scsi_cmnd *cmd, *n;
@@ -288,7 +281,7 @@ static void sas_scsi_clear_queue_lu(stru
 	list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
 		if (cmd->device->sdev_target == my_cmd->device->sdev_target &&
 		    cmd->device->lun == my_cmd->device->lun)
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 	}
 }
 
@@ -678,12 +671,12 @@ static void sas_eh_handle_sas_errors(str
 		case TASK_IS_DONE:
 			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_ABORTED:
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
 				    __func__, task);
-			sas_eh_defer_cmd(cmd);
+			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_AT_LU:
 			SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
@@ -694,7 +687,7 @@ static void sas_eh_handle_sas_errors(str
 					    "recovered\n",
 					    SAS_ADDR(task->dev),
 					    cmd->device->lun);
-				sas_eh_defer_cmd(cmd);
+				sas_eh_finish_cmd(cmd);
 				sas_scsi_clear_queue_lu(work_q, cmd);
 				goto Again;
 			}

[PATCH 3.18 42/45] scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Potapenko <glider@google.com>

commit a45b599ad808c3c982fdcdc12b0b8611c2f92824 upstream.

This shall help avoid copying uninitialized memory to the userspace when
calling ioctl(fd, SG_IO) with an empty command.

Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1950,7 +1950,7 @@ retry:
 		num = (rem_sz > scatter_elem_sz_prev) ?
 			scatter_elem_sz_prev : rem_sz;
 
-		schp->pages[k] = alloc_pages(gfp_mask, order);
+		schp->pages[k] = alloc_pages(gfp_mask | __GFP_ZERO, order);
 		if (!schp->pages[k])
 			goto out;
 

[PATCH 3.18 43/45] cfg80211: limit wiphy names to 128 bytes

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream.

There's currently no limit on wiphy names, other than netlink
message size and memory limitations, but that causes issues when,
for example, the wiphy name is used in a uevent, e.g. in rfkill
where we use the same name for the rfkill instance, and then the
buffer there is "only" 2k for the environment variables.

This was reported by syzkaller, which used a 4k name.

Limit the name to something reasonable, I randomly picked 128.

Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/nl80211.h |    2 ++
 net/wireless/core.c          |    3 +++
 2 files changed, 5 insertions(+)

--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2026,6 +2026,8 @@ enum nl80211_attrs {
 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
+#define NL80211_WIPHY_NAME_MAXLEN		128
+
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_HT_RATES		77
 #define NL80211_MAX_SUPP_REG_RULES		32
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -94,6 +94,9 @@ int cfg80211_dev_rename(struct cfg80211_
 
 	ASSERT_RTNL();
 
+	if (strlen(newname) > NL80211_WIPHY_NAME_MAXLEN)
+		return -EINVAL;
+
 	/* prohibit calling the thing phy%d when %d is not its number */
 	sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
 	if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {

[PATCH 3.18 44/45] hfsplus: stop workqueue when fill_super() failed

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 66072c29328717072fd84aaff3e070e3f008ba77 upstream.

syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1].  This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().

As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work().  Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().

[1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9

Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hfsplus/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -582,6 +582,7 @@ static int hfsplus_fill_super(struct sup
 	return 0;
 
 out_put_hidden_dir:
+	cancel_delayed_work_sync(&sbi->sync_work);
 	iput(sbi->hidden_dir);
 out_put_root:
 	dput(sb->s_root);

[PATCH 3.18 45/45] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit a466ef76b815b86748d9870ef2a430af7b39c710 upstream.

>>From ff82bedd3e12f0d3353282054ae48c3bd8c72012 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed, 9 May 2018 12:12:39 +0900
Subject: [PATCH 3.18 45/45] x86/kexec: Avoid double free_page() upon do_kexec_load() failure

syzbot is reporting crashes after memory allocation failure inside
do_kexec_load() [1]. This is because free_transition_pgtable() is called
by both init_transition_pgtable() and machine_kexec_cleanup() when memory
allocation failed inside init_transition_pgtable().

Regarding 32bit code, machine_kexec_free_page_tables() is called by both
machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory
allocation failed inside machine_kexec_alloc_page_tables().

Fix this by leaving the error handling to machine_kexec_cleanup()
(and optionally setting NULL after free_page()).

[1] https://syzkaller.appspot.com/bug?id=91e52396168cf2bdd572fe1e1bc0bc645c1c6b40

Fixes: f5deb79679af6eb4 ("x86: kexec: Use one page table in x86_64 machine_kexec")
Fixes: 92be3d6bdf2cb349 ("kexec/i386: allocate page table pages dynamically")
Reported-by: syzbot <syzbot+d96f60296ef613fe1d69@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: prudo@linux.vnet.ibm.com
Cc: Huang Ying <ying.huang@intel.com>
Cc: syzkaller-bugs@googlegroups.com
Cc: takahiro.akashi@linaro.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: akpm@linux-foundation.org
Cc: dyoung@redhat.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/201805091942.DGG12448.tMFVFSJFQOOLHO@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/machine_kexec_32.c |    6 +++++-
 arch/x86/kernel/machine_kexec_64.c |    4 +++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -70,12 +70,17 @@ static void load_segments(void)
 static void machine_kexec_free_page_tables(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.pgd);
+	image->arch.pgd = NULL;
 #ifdef CONFIG_X86_PAE
 	free_page((unsigned long)image->arch.pmd0);
+	image->arch.pmd0 = NULL;
 	free_page((unsigned long)image->arch.pmd1);
+	image->arch.pmd1 = NULL;
 #endif
 	free_page((unsigned long)image->arch.pte0);
+	image->arch.pte0 = NULL;
 	free_page((unsigned long)image->arch.pte1);
+	image->arch.pte1 = NULL;
 }
 
 static int machine_kexec_alloc_page_tables(struct kimage *image)
@@ -92,7 +97,6 @@ static int machine_kexec_alloc_page_tabl
 	    !image->arch.pmd0 || !image->arch.pmd1 ||
 #endif
 	    !image->arch.pte0 || !image->arch.pte1) {
-		machine_kexec_free_page_tables(image);
 		return -ENOMEM;
 	}
 	return 0;
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -34,8 +34,11 @@ static struct kexec_file_ops *kexec_file
 static void free_transition_pgtable(struct kimage *image)
 {
 	free_page((unsigned long)image->arch.pud);
+	image->arch.pud = NULL;
 	free_page((unsigned long)image->arch.pmd);
+	image->arch.pmd = NULL;
 	free_page((unsigned long)image->arch.pte);
+	image->arch.pte = NULL;
 }
 
 static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
@@ -76,7 +79,6 @@ static int init_transition_pgtable(struc
 	set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC));
 	return 0;
 err:
-	free_transition_pgtable(image);
 	return result;
 }
 

Re: [PATCH 3.18 00/45] 3.18.110-stable review

[Nathan Chancellor]

On Thu, May 24, 2018 at 11:38:08AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.110 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:30:59 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.110-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled with -Werror, and installed on my Pixel XL.

No issues noticed in dmesg or general usage.

Thanks!
Nathan

Re: [PATCH 3.18 00/45] 3.18.110-stable review

[Harsh Shandilya]

On 24 May 2018 3:08:08 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>This is the start of the stable review cycle for the 3.18.110 release.
>There are 45 patches in this series, all will be posted as a response
>to this one.  If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sat May 26 09:30:59 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
>	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.110-rc1.gz
>or in the git tree and branch at:
>	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-3.18.y
>and the diffstat can be found below.

Cleanly merges, builds and boots on the OnePlus 3T, no immediate regressions noticed. Thanks for the update!
-- 
Harsh Shandilya, PRJKT Development LLC.

Re: [PATCH 3.18 00/45] 3.18.110-stable review

[Greg Kroah-Hartman]

On Thu, May 24, 2018 at 08:14:17PM +0530, Harsh Shandilya wrote:
> On 24 May 2018 3:08:08 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >This is the start of the stable review cycle for the 3.18.110 release.
> >There are 45 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sat May 26 09:30:59 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> >	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.110-rc1.gz
> >or in the git tree and branch at:
> >	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-3.18.y
> >and the diffstat can be found below.
> 
> Cleanly merges, builds and boots on the OnePlus 3T, no immediate regressions noticed. Thanks for the update!
> -- 
> Harsh Shandilya, PRJKT Development LLC.

Thanks for testing and letting me know.

greg k-h

Re: [PATCH 3.18 00/45] 3.18.110-stable review

[Guenter Roeck]

On Thu, May 24, 2018 at 11:38:08AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.110 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:30:59 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 119 pass: 119 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 3.18 00/45] 3.18.110-stable review

[Shuah Khan]

On 05/24/2018 03:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.110 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat May 26 09:30:59 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.110-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah