From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:53106 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934284AbeFRIQo (ORCPT ); Mon, 18 Jun 2018 04:16:44 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Martin Blumenstingl , Kevin Hilman , Sasha Levin Subject: [PATCH 4.16 043/279] ARM64: dts: meson-gxm: add GXM specific USB host configuration Date: Mon, 18 Jun 2018 10:10:28 +0200 Message-Id: <20180618080610.574381328@linuxfoundation.org> In-Reply-To: <20180618080608.851973560@linuxfoundation.org> References: <20180618080608.851973560@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.16-stable review patch. If anyone has any objections, please let me know. ------------------ From: Martin Blumenstingl [ Upstream commit 458baa95c86406c81c6ebac0a98d1689075a3ec4 ] The USB configuration on GXM is slightly different than on GXL. The dwc3 controller's internal hub has three USB2 ports (instead of 2 on GXL) along with a dedicated USB2 PHY for this port. However, it seems that there are no pins on GXM which would allow connecting the third port to a physical USB port. Passing the third PHY is required though, because without it none of the other USB ports is working (this seems to be a limitation of how the internal USB hub works, if one PHY is disabled then no USB port works). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -117,6 +117,19 @@ }; }; +&apb { + usb2_phy2: phy@78040 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78040 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + status = "okay"; + }; +}; + &clkc_AO { compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; }; @@ -137,3 +150,7 @@ &hdmi_tx { compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; }; + +&dwc3 { + phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; +};