From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:55396 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965196AbeFRIVv (ORCPT ); Mon, 18 Jun 2018 04:21:51 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Adam Ford , Tony Lindgren , Sasha Levin Subject: [PATCH 4.16 145/279] ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues Date: Mon, 18 Jun 2018 10:12:10 +0200 Message-Id: <20180618080614.822462119@linuxfoundation.org> In-Reply-To: <20180618080608.851973560@linuxfoundation.org> References: <20180618080608.851973560@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: stable-owner@vger.kernel.org List-ID: 4.16-stable review patch. If anyone has any objections, please let me know. ------------------ From: Adam Ford [ Upstream commit 189822cbcbf3ea37c26a15612d8f922c440bc0e0 ] The VAUX3 rail from the PMIC powers a clock driver which clocks the WL127x. This corrects a bug which did not correctly associate the vin-supply with the proper power rail. This also fixes a typo in the pinmuxing to properly configure the interrupt pin. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -26,7 +26,7 @@ gpio = <&gpio1 3 0>; /* gpio_3 */ startup-delay-us = <70000>; enable-active-high; - vin-supply = <&vmmc2>; + vin-supply = <&vaux3>; }; /* HS USB Host PHY on PORT 1 */ @@ -209,7 +209,7 @@ }; wl127x_gpio: pinmux_wl127x_gpio_pin { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; @@ -244,6 +244,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &twl { twl_power: power { compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";