Re: [PATCH] mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Boris,

Boris Brezillon <boris.brezillon@bootlin.com> wrote on Wed,  4 Jul 2018
16:08:58 +0200:

> Modern NAND controller drivers implement ->exec_op() instead of
> ->cmdfunc(), make sure we don't end up with a NULL pointer dereference  
> when hynix_nand_reg_write_op() is called.
> 
> Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
>  drivers/mtd/nand/raw/nand_hynix.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
> index 8cbe77f447c7..4ffbb26e76d6 100644
> --- a/drivers/mtd/nand/raw/nand_hynix.c
> +++ b/drivers/mtd/nand/raw/nand_hynix.c
> @@ -100,6 +100,16 @@ static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val)
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	u16 column = ((u16)addr << 8) | addr;
>  
> +	if (chip->exec_op) {
> +		struct nand_op_instr instrs[] = {
> +			NAND_OP_ADDR(1, &addr, 0),
> +			NAND_OP_8BIT_DATA_OUT(1, &val, 0),
> +		};
> +		struct nand_operation op = NAND_OPERATION(instrs);
> +
> +		return nand_exec_op(chip, &op);
> +	}
> +
>  	chip->cmdfunc(mtd, NAND_CMD_NONE, column, -1);
>  	chip->write_byte(mtd, val);
>  

Applied to nand/next.

Thanks,
Miquèl