stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Thomas Walker <Thomas.Walker@twosigma.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.14 17/92] hv_netvsc: split sub-channel setup into async and sync
Date: Fri, 20 Jul 2018 14:13:21 +0200	[thread overview]
Message-ID: <20180720121418.363390882@linuxfoundation.org> (raw)
In-Reply-To: <20180720121417.206337808@linuxfoundation.org>

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hemminger <sthemmin@microsoft.com>

[ Upstream commit 3ffe64f1a641b80a82d9ef4efa7a05ce69049871 ]

When doing device hotplug the sub channel must be async to avoid
deadlock issues because device is discovered in softirq context.

When doing changes to MTU and number of channels, the setup
must be synchronous to avoid races such as when MTU and device
settings are done in a single ip command.

Reported-by: Thomas Walker <Thomas.Walker@twosigma.com>
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/hyperv_net.h   |    2 -
 drivers/net/hyperv/netvsc.c       |   37 ++++++++++++++++++++++-
 drivers/net/hyperv/netvsc_drv.c   |   17 +++++++++-
 drivers/net/hyperv/rndis_filter.c |   61 +++++++-------------------------------
 4 files changed, 65 insertions(+), 52 deletions(-)

--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -207,7 +207,7 @@ int netvsc_recv_callback(struct net_devi
 void netvsc_channel_cb(void *context);
 int netvsc_poll(struct napi_struct *napi, int budget);
 
-void rndis_set_subchannel(struct work_struct *w);
+int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev);
 int rndis_filter_open(struct netvsc_device *nvdev);
 int rndis_filter_close(struct netvsc_device *nvdev);
 struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -62,6 +62,41 @@ void netvsc_switch_datapath(struct net_d
 			       VM_PKT_DATA_INBAND, 0);
 }
 
+/* Worker to setup sub channels on initial setup
+ * Initial hotplug event occurs in softirq context
+ * and can't wait for channels.
+ */
+static void netvsc_subchan_work(struct work_struct *w)
+{
+	struct netvsc_device *nvdev =
+		container_of(w, struct netvsc_device, subchan_work);
+	struct rndis_device *rdev;
+	int i, ret;
+
+	/* Avoid deadlock with device removal already under RTNL */
+	if (!rtnl_trylock()) {
+		schedule_work(w);
+		return;
+	}
+
+	rdev = nvdev->extension;
+	if (rdev) {
+		ret = rndis_set_subchannel(rdev->ndev, nvdev);
+		if (ret == 0) {
+			netif_device_attach(rdev->ndev);
+		} else {
+			/* fallback to only primary channel */
+			for (i = 1; i < nvdev->num_chn; i++)
+				netif_napi_del(&nvdev->chan_table[i].napi);
+
+			nvdev->max_chn = 1;
+			nvdev->num_chn = 1;
+		}
+	}
+
+	rtnl_unlock();
+}
+
 static struct netvsc_device *alloc_net_device(void)
 {
 	struct netvsc_device *net_device;
@@ -78,7 +113,7 @@ static struct netvsc_device *alloc_net_d
 
 	init_completion(&net_device->channel_init_wait);
 	init_waitqueue_head(&net_device->subchan_open);
-	INIT_WORK(&net_device->subchan_work, rndis_set_subchannel);
+	INIT_WORK(&net_device->subchan_work, netvsc_subchan_work);
 
 	return net_device;
 }
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -911,8 +911,20 @@ static int netvsc_attach(struct net_devi
 	if (IS_ERR(nvdev))
 		return PTR_ERR(nvdev);
 
-	/* Note: enable and attach happen when sub-channels setup */
+	if (nvdev->num_chn > 1) {
+		ret = rndis_set_subchannel(ndev, nvdev);
+
+		/* if unavailable, just proceed with one queue */
+		if (ret) {
+			nvdev->max_chn = 1;
+			nvdev->num_chn = 1;
+		}
+	}
 
+	/* In any case device is now ready */
+	netif_device_attach(ndev);
+
+	/* Note: enable and attach happen when sub-channels setup */
 	netif_carrier_off(ndev);
 
 	if (netif_running(ndev)) {
@@ -2035,6 +2047,9 @@ static int netvsc_probe(struct hv_device
 
 	memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
 
+	if (nvdev->num_chn > 1)
+		schedule_work(&nvdev->subchan_work);
+
 	/* hw_features computed in rndis_netdev_set_hwcaps() */
 	net->features = net->hw_features |
 		NETIF_F_HIGHDMA | NETIF_F_SG |
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1055,29 +1055,15 @@ static void netvsc_sc_open(struct vmbus_
  * This breaks overlap of processing the host message for the
  * new primary channel with the initialization of sub-channels.
  */
-void rndis_set_subchannel(struct work_struct *w)
+int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev)
 {
-	struct netvsc_device *nvdev
-		= container_of(w, struct netvsc_device, subchan_work);
 	struct nvsp_message *init_packet = &nvdev->channel_init_pkt;
-	struct net_device_context *ndev_ctx;
-	struct rndis_device *rdev;
-	struct net_device *ndev;
-	struct hv_device *hv_dev;
+	struct net_device_context *ndev_ctx = netdev_priv(ndev);
+	struct hv_device *hv_dev = ndev_ctx->device_ctx;
+	struct rndis_device *rdev = nvdev->extension;
 	int i, ret;
 
-	if (!rtnl_trylock()) {
-		schedule_work(w);
-		return;
-	}
-
-	rdev = nvdev->extension;
-	if (!rdev)
-		goto unlock;	/* device was removed */
-
-	ndev = rdev->ndev;
-	ndev_ctx = netdev_priv(ndev);
-	hv_dev = ndev_ctx->device_ctx;
+	ASSERT_RTNL();
 
 	memset(init_packet, 0, sizeof(struct nvsp_message));
 	init_packet->hdr.msg_type = NVSP_MSG5_TYPE_SUBCHANNEL;
@@ -1091,13 +1077,13 @@ void rndis_set_subchannel(struct work_st
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 	if (ret) {
 		netdev_err(ndev, "sub channel allocate send failed: %d\n", ret);
-		goto failed;
+		return ret;
 	}
 
 	wait_for_completion(&nvdev->channel_init_wait);
 	if (init_packet->msg.v5_msg.subchn_comp.status != NVSP_STAT_SUCCESS) {
 		netdev_err(ndev, "sub channel request failed\n");
-		goto failed;
+		return -EIO;
 	}
 
 	nvdev->num_chn = 1 +
@@ -1116,21 +1102,7 @@ void rndis_set_subchannel(struct work_st
 	for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
 		ndev_ctx->tx_table[i] = i % nvdev->num_chn;
 
-	netif_device_attach(ndev);
-	rtnl_unlock();
-	return;
-
-failed:
-	/* fallback to only primary channel */
-	for (i = 1; i < nvdev->num_chn; i++)
-		netif_napi_del(&nvdev->chan_table[i].napi);
-
-	nvdev->max_chn = 1;
-	nvdev->num_chn = 1;
-
-	netif_device_attach(ndev);
-unlock:
-	rtnl_unlock();
+	return 0;
 }
 
 static int rndis_netdev_set_hwcaps(struct rndis_device *rndis_device,
@@ -1321,21 +1293,12 @@ struct netvsc_device *rndis_filter_devic
 		netif_napi_add(net, &net_device->chan_table[i].napi,
 			       netvsc_poll, NAPI_POLL_WEIGHT);
 
-	if (net_device->num_chn > 1)
-		schedule_work(&net_device->subchan_work);
+	return net_device;
 
 out:
-	/* if unavailable, just proceed with one queue */
-	if (ret) {
-		net_device->max_chn = 1;
-		net_device->num_chn = 1;
-	}
-
-	/* No sub channels, device is ready */
-	if (net_device->num_chn == 1)
-		netif_device_attach(net);
-
-	return net_device;
+	/* setting up multiple channels failed */
+	net_device->max_chn = 1;
+	net_device->num_chn = 1;
 
 err_dev_remv:
 	rndis_filter_device_remove(dev, net_device);

  parent reply	other threads:[~2018-07-20 12:13 UTC|newest]

Thread overview: 92+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-20 12:13 [PATCH 4.14 00/92] 4.14.57-stable review Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 01/92] compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 02/92] x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h> Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 03/92] x86/paravirt: Make native_save_fl() extern inline Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 04/92] Btrfs: fix duplicate extents after fsync of file with prealloc extents Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 05/92] cpufreq / CPPC: Set platform specific transition_delay_us Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 06/92] xprtrdma: Fix corner cases when handling device removal Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 07/92] ocfs2: subsystem.su_mutex is required while accessing the item->ci_parent Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 08/92] ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 09/92] bcm63xx_enet: correct clock usage Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 10/92] bcm63xx_enet: do not write to random DMA channel on BCM6345 Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 11/92] PCI: exynos: Fix a potential init_clk_resources NULL pointer dereference Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 12/92] crypto: crypto4xx - remove bad list_del Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 13/92] crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 14/92] alx: take rtnl before calling __alx_open from resume Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 16/92] atm: zatm: Fix potential Spectre v1 Greg Kroah-Hartman
2018-07-20 12:13 ` Greg Kroah-Hartman [this message]
2018-07-20 12:13 ` [PATCH 4.14 18/92] ipv6: sr: fix passing wrong flags to crypto_alloc_shash() Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 19/92] ipvlan: fix IFLA_MTU ignored on NEWLINK Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 20/92] ixgbe: split XDP_TX tail and XDP_REDIRECT map flushing Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 21/92] net: dccp: avoid crash in ccid3_hc_rx_send_feedback() Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 22/92] net: dccp: switch rx_tstamp_last_feedback to monotonic clock Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 23/92] net: fix use-after-free in GRO with ESP Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 24/92] net: macb: Fix ptp time adjustment for large negative delta Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 25/92] net/mlx5e: Avoid dealing with vport representors if not being e-switch manager Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 26/92] net/mlx5e: Dont attempt to dereference the ppriv struct if not being eswitch manager Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 27/92] net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 28/92] net/mlx5: Fix command interface race in polling mode Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 29/92] net/mlx5: Fix incorrect raw command length parsing Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 30/92] net/mlx5: Fix required capability for manipulating MPFS Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 31/92] net/mlx5: Fix wrong size allocation for QoS ETC TC regitster Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 32/92] net: mvneta: fix the Rx desc DMA address in the Rx path Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 33/92] net/packet: fix use-after-free Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 34/92] net_sched: blackhole: tell upper qdisc about dropped packets Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 35/92] net: sungem: fix rx checksum support Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 36/92] net/tcp: Fix socket lookups with SO_BINDTODEVICE Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 37/92] qede: Adverstise software timestamp caps when PHC is not available Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 38/92] qed: Fix setting of incorrect eswitch mode Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 39/92] qed: Fix use of incorrect size in memcpy call Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 40/92] qed: Limit msix vectors in kdump kernel to the minimum required count Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 42/92] r8152: napi hangup fix after disconnect Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 43/92] stmmac: fix DMA channel hang in half-duplex mode Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 44/92] strparser: Remove early eaten to fix full tcp receive buffer stall Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 45/92] tcp: fix Fast Open key endianness Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 47/92] vhost_net: validate sock before trying to put its fd Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 48/92] VSOCK: fix loopback on big-endian systems Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 49/92] net: cxgb3_main: fix potential Spectre v1 Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 50/92] rtlwifi: Fix kernel Oops "Fw download fail!!" Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 51/92] rtlwifi: rtl8821ae: fix firmware is not ready to run Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 52/92] net: lan78xx: Fix race in tx pending skb size calculation Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 53/92] xhci: Fix USB3 NULL pointer dereference at logical disconnect Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 54/92] media: rc: oops in ir_timer_keyup after device unplug Greg Kroah-Hartman
2018-07-20 12:13 ` [PATCH 4.14 55/92] clocksource: Initialize cs->wd_list Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 56/92] crypto: af_alg - Initialize sg_num_bytes in error code path Greg Kroah-Hartman
2018-07-20 12:54   ` KMSAN: uninit-value in af_alg_free_areq_sgls syzbot
2018-07-20 12:14 ` [PATCH 4.14 57/92] mtd: rawnand: denali_dt: set clk_x_rate to 200 MHz unconditionally Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 58/92] block: do not use interruptible wait anywhere Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 59/92] PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg() Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 60/92] netfilter: ebtables: reject non-bridge targets Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 61/92] reiserfs: fix buffer overflow with long warning messages Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 62/92] KEYS: DNS: fix parsing multiple options Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 63/92] tls: Stricter error checking in zerocopy sendmsg path Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 64/92] autofs: fix slab out of bounds read in getname_kernel() Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 65/92] nsh: set mac len based on inner packet Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 66/92] netfilter: ipv6: nf_defrag: drop skb dst before queueing Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 67/92] bdi: Fix another oops in wb_workfn() Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 68/92] rds: avoid unenecessary cong_update in loop transport Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 69/92] net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 70/92] KVM: arm64: Store vcpu on the stack during __guest_enter() Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 71/92] KVM: arm/arm64: Convert kvm_host_cpu_state to a static per-cpu allocation Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 72/92] KVM: arm64: Change hyp_panic()s dependency on tpidr_el2 Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 73/92] arm64: alternatives: use tpidr_el2 on VHE hosts Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 74/92] KVM: arm64: Stop save/restoring host tpidr_el1 on VHE Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 75/92] arm64: alternatives: Add dynamic patching feature Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 76/92] KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_state Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 77/92] KVM: arm64: Avoid storing the vcpu pointer on the stack Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 78/92] arm/arm64: smccc: Add SMCCC-specific return codes Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 79/92] arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 80/92] arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2 Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 81/92] arm64: Add ARCH_WORKAROUND_2 probing Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 82/92] arm64: Add ssbd command-line option Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 83/92] arm64: ssbd: Add global mitigation state accessor Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 84/92] arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 85/92] arm64: ssbd: Restore mitigation status on CPU resume Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 86/92] arm64: ssbd: Introduce thread flag to control userspace mitigation Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 87/92] arm64: ssbd: Add prctl interface for per-thread mitigation Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 88/92] arm64: KVM: Add HYP per-cpu accessors Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 89/92] arm64: KVM: Add ARCH_WORKAROUND_2 support for guests Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 90/92] arm64: KVM: Handle guests ARCH_WORKAROUND_2 requests Greg Kroah-Hartman
2018-07-20 12:14 ` [PATCH 4.14 91/92] arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID Greg Kroah-Hartman
2018-07-21  9:16 ` [PATCH 4.14 00/92] 4.14.57-stable review Naresh Kamboju
2018-07-21 13:41 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180720121418.363390882@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Thomas.Walker@twosigma.com \
    --cc=davem@davemloft.net \
    --cc=haiyangz@microsoft.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=sthemmin@microsoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).