From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Wolfram Sang , Daniel Thompson , Simon Horman , Lee Jones , Sasha Levin Subject: [PATCH 4.14 180/246] backlight: pwm_bl: Dont use GPIOF_* with gpiod_get_direction Date: Wed, 1 Aug 2018 18:51:30 +0200 Message-Id: <20180801165020.345834849@linuxfoundation.org> In-Reply-To: <20180801165011.700991984@linuxfoundation.org> References: <20180801165011.700991984@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Wolfram Sang [ Upstream commit bb084c0f61d659f0e6d371b096e0e57998f191d6 ] The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 ("gpio: correct docs about return value of gpiod_get_direction"). Now, fix this user (until a better, system-wide solution is in place). Signed-off-by: Wolfram Sang Acked-by: Daniel Thompson Reviewed-by: Simon Horman Signed-off-by: Lee Jones Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/video/backlight/pwm_bl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -301,14 +301,14 @@ static int pwm_backlight_probe(struct pl /* * If the GPIO is not known to be already configured as output, that - * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL, - * change the direction to output and set the GPIO as active. + * is, if gpiod_get_direction returns either 1 or -EINVAL, change the + * direction to output and set the GPIO as active. * Do not force the GPIO to active when it was already output as it * could cause backlight flickering or we would enable the backlight too * early. Leave the decision of the initial backlight state for later. */ if (pb->enable_gpio && - gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT) + gpiod_get_direction(pb->enable_gpio) != 0) gpiod_direction_output(pb->enable_gpio, 1); pb->power_supply = devm_regulator_get(&pdev->dev, "power");