[PATCH 4.14 00/29] 4.14.66-stable review

[PATCH 4.14 00/29] 4.14.66-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.66 release.
There are 29 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Aug 23 05:50:58 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.66-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.66-rc1

Hangbin Liu <liuhangbin@gmail.com>
    cls_matchall: fix tcf_unbind_filter missing

Kees Cook <keescook@chromium.org>
    isdn: Disable IIOCDBGVAR

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    Bluetooth: avoid killing an already killed socket

Johan Hovold <johan@kernel.org>
    misc: sram: fix resource leaks in probe error path

Srinath Mannam <srinath.mannam@broadcom.com>
    serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

Chen Hu <hu1.chen@intel.com>
    serial: 8250_dw: always set baud rate in dw8250_set_termios

Aaron Sierra <asierra@xes-inc.com>
    serial: 8250_exar: Read INT0 from slave device, too

Mark <dmarkh@cfl.rr.com>
    tty: serial: 8250: Revert NXP SC16C2552 workaround

Willy Tarreau <w@1wt.eu>
    ACPI / PM: save NVS memory for ASUS 1025C laptop

Aleksander Morgado <aleksander@aleksander.es>
    USB: option: add support for DW5821e

Movie Song <MovieSong@aten-itlab.cn>
    USB: serial: pl2303: add a new device id for ATEN

John Ogness <john.ogness@linutronix.de>
    USB: serial: sierra: fix potential deadlock at close

Takashi Iwai <tiwai@suse.de>
    ALSA: vxpocket: Fix invalid endian conversions

Takashi Iwai <tiwai@suse.de>
    ALSA: memalloc: Don't exceed over the requested size

Hans de Goede <hdegoede@redhat.com>
    ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry

Takashi Iwai <tiwai@suse.de>
    ALSA: cs5535audio: Fix invalid endian conversion

Takashi Iwai <tiwai@suse.de>
    ALSA: virmidi: Fix too long output trigger loop

Takashi Iwai <tiwai@suse.de>
    ALSA: vx222: Fix invalid endian conversions

Park Ju Hyung <qkrwngud825@gmail.com>
    ALSA: hda - Turn CX8200 into D3 as well upon reboot

Park Ju Hyung <qkrwngud825@gmail.com>
    ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs

Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
    net: aquantia: Fix IFF_ALLMULTI flag functionality

Xin Long <lucien.xin@gmail.com>
    ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit

Jason Wang <jasowang@redhat.com>
    vhost: reset metadata cache when initializing new IOTLB

Hangbin Liu <liuhangbin@gmail.com>
    net_sched: Fix missing res info when create new tc_index filter

Cong Wang <xiyou.wangcong@gmail.com>
    vsock: split dwork to avoid reinitializations

Hangbin Liu <liuhangbin@gmail.com>
    net_sched: fix NULL pointer dereference when delete tcindex filter

Cong Wang <xiyou.wangcong@gmail.com>
    llc: use refcount_inc_not_zero() for llc_sap_find()

Wei Wang <weiwan@google.com>
    l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache

Alexey Kodanev <alexey.kodanev@oracle.com>
    dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()


-------------

Diffstat:

 Makefile                                                  |  4 ++--
 drivers/acpi/sleep.c                                      |  8 ++++++++
 drivers/isdn/i4l/isdn_common.c                            |  8 +-------
 drivers/misc/sram.c                                       |  9 ++++++++-
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c |  2 +-
 drivers/tty/serial/8250/8250_dw.c                         |  3 ++-
 drivers/tty/serial/8250/8250_exar.c                       |  6 +++++-
 drivers/tty/serial/8250/8250_port.c                       |  3 +--
 drivers/usb/serial/option.c                               |  4 ++++
 drivers/usb/serial/pl2303.c                               |  2 ++
 drivers/usb/serial/pl2303.h                               |  1 +
 drivers/usb/serial/sierra.c                               |  4 ++--
 drivers/vhost/vhost.c                                     |  9 ++++++---
 include/net/af_vsock.h                                    |  4 ++--
 include/net/llc.h                                         |  5 +++++
 net/bluetooth/sco.c                                       |  3 ++-
 net/dccp/ccids/ccid2.c                                    |  6 ++++--
 net/ipv6/ip6_tunnel.c                                     |  8 ++------
 net/l2tp/l2tp_core.c                                      |  2 +-
 net/llc/llc_core.c                                        |  4 ++--
 net/sched/cls_matchall.c                                  |  2 ++
 net/sched/cls_tcindex.c                                   |  8 +++-----
 net/vmw_vsock/af_vsock.c                                  | 15 ++++++++-------
 net/vmw_vsock/vmci_transport.c                            |  3 +--
 sound/core/memalloc.c                                     |  8 ++------
 sound/core/seq/seq_virmidi.c                              | 10 ++++++++++
 sound/pci/cs5535audio/cs5535audio.h                       |  6 +++---
 sound/pci/cs5535audio/cs5535audio_pcm.c                   |  4 ++--
 sound/pci/hda/hda_intel.c                                 |  2 +-
 sound/pci/hda/patch_conexant.c                            |  4 +++-
 sound/pci/vx222/vx222_ops.c                               |  8 ++++----
 sound/pcmcia/vx/vxp_ops.c                                 | 10 +++++-----
 32 files changed, 105 insertions(+), 70 deletions(-)

[PATCH 4.14 01/29] dccp: fix undefined behavior with cwnd shift in ccid2_cwnd_restart()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <alexey.kodanev@oracle.com>

[ Upstream commit 61ef4b07fcdc30535889990cf4229766502561cf ]

The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value
can lead to undefined behavior [1].

In order to fix this use a gradual shift of the window with a 'while'
loop, similar to what tcp_cwnd_restart() is doing.

When comparing delta and RTO there is a minor difference between TCP
and DCCP, the last one also invokes dccp_cwnd_restart() and reduces
'cwnd' if delta equals RTO. That case is preserved in this change.

[1]:
[40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7
[40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int'
[40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G        W   E     4.18.0-rc7.x86_64 #1
...
[40851.377176] Call Trace:
[40851.408503]  dump_stack+0xf1/0x17b
[40851.451331]  ? show_regs_print_info+0x5/0x5
[40851.503555]  ubsan_epilogue+0x9/0x7c
[40851.548363]  __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4
[40851.617109]  ? __ubsan_handle_load_invalid_value+0x18f/0x18f
[40851.686796]  ? xfrm4_output_finish+0x80/0x80
[40851.739827]  ? lock_downgrade+0x6d0/0x6d0
[40851.789744]  ? xfrm4_prepare_output+0x160/0x160
[40851.845912]  ? ip_queue_xmit+0x810/0x1db0
[40851.895845]  ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40851.963530]  ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40852.029063]  dccp_xmit_packet+0x1d3/0x720 [dccp]
[40852.086254]  dccp_write_xmit+0x116/0x1d0 [dccp]
[40852.142412]  dccp_sendmsg+0x428/0xb20 [dccp]
[40852.195454]  ? inet_dccp_listen+0x200/0x200 [dccp]
[40852.254833]  ? sched_clock+0x5/0x10
[40852.298508]  ? sched_clock+0x5/0x10
[40852.342194]  ? inet_create+0xdf0/0xdf0
[40852.388988]  sock_sendmsg+0xd9/0x160
...

Fixes: 113ced1f52e5 ("dccp ccid-2: Perform congestion-window validation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dccp/ccids/ccid2.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -228,14 +228,16 @@ static void ccid2_cwnd_restart(struct so
 	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	u32 cwnd = hc->tx_cwnd, restart_cwnd,
 	    iwnd = rfc3390_bytes_to_packets(dccp_sk(sk)->dccps_mss_cache);
+	s32 delta = now - hc->tx_lsndtime;
 
 	hc->tx_ssthresh = max(hc->tx_ssthresh, (cwnd >> 1) + (cwnd >> 2));
 
 	/* don't reduce cwnd below the initial window (IW) */
 	restart_cwnd = min(cwnd, iwnd);
-	cwnd >>= (now - hc->tx_lsndtime) / hc->tx_rto;
-	hc->tx_cwnd = max(cwnd, restart_cwnd);
 
+	while ((delta -= hc->tx_rto) >= 0 && cwnd > restart_cwnd)
+		cwnd >>= 1;
+	hc->tx_cwnd = max(cwnd, restart_cwnd);
 	hc->tx_cwnd_stamp = now;
 	hc->tx_cwnd_used  = 0;
 

[PATCH 4.14 02/29] l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Wang <weiwan@google.com>

[ Upstream commit 6d37fa49da1e8db8fb1995be22ac837ca41ac8a8 ]

In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a
UDP socket. User could call sendmsg() on both this tunnel and the UDP
socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call
__sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is
lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there
could be a race and cause the dst cache to be freed multiple times.
So we fix l2tp side code to always call sk_dst_check() to garantee
xchg() is called when refreshing sk->sk_dst_cache to avoid race
conditions.

Syzkaller reported stack trace:
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline]
BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline]
BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829

CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
 atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
 atomic_add_unless include/linux/atomic.h:597 [inline]
 dst_hold_safe include/net/dst.h:308 [inline]
 ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline]
 ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098
 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126
 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978
 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117
 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115
 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210
 __do_sys_sendmmsg net/socket.c:2239 [inline]
 __se_sys_sendmmsg net/socket.c:2236 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446a29
Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29
RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003
RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c
R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001

Fixes: 71b1391a4128 ("l2tp: ensure sk->dst is still valid")
Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David Ahern <dsahern@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/l2tp/l2tp_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1211,7 +1211,7 @@ int l2tp_xmit_skb(struct l2tp_session *s
 
 	/* Get routing info from the tunnel socket */
 	skb_dst_drop(skb);
-	skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0)));
+	skb_dst_set(skb, sk_dst_check(sk, 0));
 
 	inet = inet_sk(sk);
 	fl = &inet->cork.fl;

[PATCH 4.14 03/29] llc: use refcount_inc_not_zero() for llc_sap_find()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 0dcb82254d65f72333aa50ad626d1e9665ad093b ]

llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.

Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.

Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/llc.h  |    5 +++++
 net/llc/llc_core.c |    4 ++--
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -116,6 +116,11 @@ static inline void llc_sap_hold(struct l
 	refcount_inc(&sap->refcnt);
 }
 
+static inline bool llc_sap_hold_safe(struct llc_sap *sap)
+{
+	return refcount_inc_not_zero(&sap->refcnt);
+}
+
 void llc_sap_close(struct llc_sap *sap);
 
 static inline void llc_sap_put(struct llc_sap *sap)
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -73,8 +73,8 @@ struct llc_sap *llc_sap_find(unsigned ch
 
 	rcu_read_lock_bh();
 	sap = __llc_sap_find(sap_value);
-	if (sap)
-		llc_sap_hold(sap);
+	if (!sap || !llc_sap_hold_safe(sap))
+		sap = NULL;
 	rcu_read_unlock_bh();
 	return sap;
 }

[PATCH 4.14 04/29] net_sched: fix NULL pointer dereference when delete tcindex filter

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 2df8bee5654bb2b7312662ca6810d4dc16b0b67f ]

Li Shuang reported the following crash:

[   71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[   71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0
[   71.284127] Oops: 0000 [#1] SMP PTI
[   71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[   71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[   71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex]
[   71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00
[   71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282
[   71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e
[   71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800
[   71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000
[   71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7
[   71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600
[   71.377161] FS:  00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000
[   71.386188] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0
[   71.400558] Call Trace:
[   71.403299]  tcindex_destroy_element+0x25/0x40 [cls_tcindex]
[   71.409611]  tcindex_walk+0xbb/0x110 [cls_tcindex]
[   71.414953]  tcindex_destroy+0x44/0x90 [cls_tcindex]
[   71.420492]  ? tcindex_delete+0x280/0x280 [cls_tcindex]
[   71.426323]  tcf_proto_destroy+0x16/0x40
[   71.430696]  tcf_chain_flush+0x51/0x70
[   71.434876]  tcf_block_put_ext.part.30+0x8f/0x1b0
[   71.440122]  tcf_block_put+0x4d/0x70
[   71.444108]  cbq_destroy+0x4d/0xd0 [sch_cbq]
[   71.448869]  qdisc_destroy+0x62/0x130
[   71.452951]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[   71.458300]  qdisc_destroy+0x62/0x130
[   71.462373]  qdisc_graft+0x3ba/0x470
[   71.466359]  tc_get_qdisc+0x2a6/0x2c0
[   71.470443]  ? cred_has_capability+0x7d/0x130
[   71.475307]  rtnetlink_rcv_msg+0x263/0x2d0
[   71.479875]  ? rtnl_calcit.isra.30+0x110/0x110
[   71.484832]  netlink_rcv_skb+0x4d/0x130
[   71.489109]  netlink_unicast+0x1a3/0x250
[   71.493482]  netlink_sendmsg+0x2ae/0x3a0
[   71.497859]  sock_sendmsg+0x36/0x40
[   71.501748]  ___sys_sendmsg+0x26f/0x2d0
[   71.506029]  ? handle_pte_fault+0x586/0xdf0
[   71.510694]  ? __handle_mm_fault+0x389/0x500
[   71.515457]  ? __sys_sendmsg+0x5e/0xa0
[   71.519636]  __sys_sendmsg+0x5e/0xa0
[   71.523626]  do_syscall_64+0x5b/0x180
[   71.527711]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   71.533345] RIP: 0033:0x7f9d3e257f10
[   71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[   71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[   71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10
[   71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003
[   71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003
[   71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000
[   71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[   71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni
[   71.685425]  libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[   71.697075] CR2: 0000000000000004
[   71.700792] ---[ end trace f604eb1acacd978b ]---

Reproducer:
tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index
tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2
tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10
tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on
tc qdisc add dev lo parent 2:1 pfifo limit 5
tc qdisc del dev lo root

This is because in tcindex_set_parms, when there is no old_r, we set new
exts to cr.exts. And we didn't set it to filter when r == &new_filter_result.

Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer
dereference as we didn't init exts.

Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check.
Then we don't need "cr" as there is no errout after that.

Fixes: bf63ac73b3e13 ("net_sched: fix an oops in tcindex filter")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_tcindex.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -464,11 +464,6 @@ tcindex_set_parms(struct net *net, struc
 		tcf_bind_filter(tp, &cr.res, base);
 	}
 
-	if (old_r)
-		tcf_exts_change(&r->exts, &e);
-	else
-		tcf_exts_change(&cr.exts, &e);
-
 	if (old_r && old_r != r) {
 		err = tcindex_filter_result_init(old_r);
 		if (err < 0) {
@@ -479,6 +474,8 @@ tcindex_set_parms(struct net *net, struc
 
 	oldp = p;
 	r->res = cr.res;
+	tcf_exts_change(&r->exts, &e);
+
 	rcu_assign_pointer(tp->root, cp);
 
 	if (r == &new_filter_result) {

[PATCH 4.14 05/29] vsock: split dwork to avoid reinitializations

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 455f05ecd2b219e9a216050796d30c830d9bc393 ]

syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

	ODEBUG: init active (active state 0) object type: timer_list hint:
	delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
	WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
	debug_print_object+0x16a/0x210 lib/debugobjects.c:326

The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/af_vsock.h         |    4 ++--
 net/vmw_vsock/af_vsock.c       |   15 ++++++++-------
 net/vmw_vsock/vmci_transport.c |    3 +--
 3 files changed, 11 insertions(+), 11 deletions(-)

--- a/include/net/af_vsock.h
+++ b/include/net/af_vsock.h
@@ -62,7 +62,8 @@ struct vsock_sock {
 	struct list_head pending_links;
 	struct list_head accept_queue;
 	bool rejected;
-	struct delayed_work dwork;
+	struct delayed_work connect_work;
+	struct delayed_work pending_work;
 	struct delayed_work close_work;
 	bool close_work_scheduled;
 	u32 peer_shutdown;
@@ -75,7 +76,6 @@ struct vsock_sock {
 
 s64 vsock_stream_has_data(struct vsock_sock *vsk);
 s64 vsock_stream_has_space(struct vsock_sock *vsk);
-void vsock_pending_work(struct work_struct *work);
 struct sock *__vsock_create(struct net *net,
 			    struct socket *sock,
 			    struct sock *parent,
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -449,14 +449,14 @@ static int vsock_send_shutdown(struct so
 	return transport->shutdown(vsock_sk(sk), mode);
 }
 
-void vsock_pending_work(struct work_struct *work)
+static void vsock_pending_work(struct work_struct *work)
 {
 	struct sock *sk;
 	struct sock *listener;
 	struct vsock_sock *vsk;
 	bool cleanup;
 
-	vsk = container_of(work, struct vsock_sock, dwork.work);
+	vsk = container_of(work, struct vsock_sock, pending_work.work);
 	sk = sk_vsock(vsk);
 	listener = vsk->listener;
 	cleanup = true;
@@ -496,7 +496,6 @@ out:
 	sock_put(sk);
 	sock_put(listener);
 }
-EXPORT_SYMBOL_GPL(vsock_pending_work);
 
 /**** SOCKET OPERATIONS ****/
 
@@ -595,6 +594,8 @@ static int __vsock_bind(struct sock *sk,
 	return retval;
 }
 
+static void vsock_connect_timeout(struct work_struct *work);
+
 struct sock *__vsock_create(struct net *net,
 			    struct socket *sock,
 			    struct sock *parent,
@@ -637,6 +638,8 @@ struct sock *__vsock_create(struct net *
 	vsk->sent_request = false;
 	vsk->ignore_connecting_rst = false;
 	vsk->peer_shutdown = 0;
+	INIT_DELAYED_WORK(&vsk->connect_work, vsock_connect_timeout);
+	INIT_DELAYED_WORK(&vsk->pending_work, vsock_pending_work);
 
 	psk = parent ? vsock_sk(parent) : NULL;
 	if (parent) {
@@ -1116,7 +1119,7 @@ static void vsock_connect_timeout(struct
 	struct vsock_sock *vsk;
 	int cancel = 0;
 
-	vsk = container_of(work, struct vsock_sock, dwork.work);
+	vsk = container_of(work, struct vsock_sock, connect_work.work);
 	sk = sk_vsock(vsk);
 
 	lock_sock(sk);
@@ -1220,9 +1223,7 @@ static int vsock_stream_connect(struct s
 			 * timeout fires.
 			 */
 			sock_hold(sk);
-			INIT_DELAYED_WORK(&vsk->dwork,
-					  vsock_connect_timeout);
-			schedule_delayed_work(&vsk->dwork, timeout);
+			schedule_delayed_work(&vsk->connect_work, timeout);
 
 			/* Skip ahead to preserve error code set above. */
 			goto out_wait;
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -1091,8 +1091,7 @@ static int vmci_transport_recv_listen(st
 	vpending->listener = sk;
 	sock_hold(sk);
 	sock_hold(pending);
-	INIT_DELAYED_WORK(&vpending->dwork, vsock_pending_work);
-	schedule_delayed_work(&vpending->dwork, HZ);
+	schedule_delayed_work(&vpending->pending_work, HZ);
 
 out:
 	return err;

[PATCH 4.14 06/29] net_sched: Fix missing res info when create new tc_index filter

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 008369dcc5f7bfba526c98054f8525322acf0ea3 ]

Li Shuang reported the following warn:

[  733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l
[  733.574155]  syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[  733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[  733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[  733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84
[  733.635798] RSP: 0018:ffffbfbb066bb9d8 EFLAGS: 00010202
[  733.641627] RAX: 0000000000000001 RBX: ffff9cdd17392800 RCX: 000000008010000f
[  733.649588] RDX: ffff9cdd1df547e0 RSI: ffff9cdd17392800 RDI: ffff9cdd0f84c800
[  733.657547] RBP: ffff9cdd0f84c800 R08: 0000000000000001 R09: 0000000000000000
[  733.665508] R10: ffff9cdd0f84d000 R11: 0000000000000001 R12: 0000000000000001
[  733.673469] R13: 0000000000000000 R14: 0000000000000001 R15: ffff9cdd17392200
[  733.681430] FS:  00007f911890a740(0000) GS:ffff9cdd1f8c0000(0000) knlGS:0000000000000000
[  733.690456] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  733.696864] CR2: 0000000000b5544c CR3: 0000000859374002 CR4: 00000000001606e0
[  733.704826] Call Trace:
[  733.707554]  cbq_destroy+0xa1/0xd0 [sch_cbq]
[  733.712318]  qdisc_destroy+0x62/0x130
[  733.716401]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[  733.721745]  qdisc_destroy+0x62/0x130
[  733.725829]  qdisc_graft+0x3ba/0x470
[  733.729817]  tc_get_qdisc+0x2a6/0x2c0
[  733.733901]  ? cred_has_capability+0x7d/0x130
[  733.738761]  rtnetlink_rcv_msg+0x263/0x2d0
[  733.743330]  ? rtnl_calcit.isra.30+0x110/0x110
[  733.748287]  netlink_rcv_skb+0x4d/0x130
[  733.752576]  netlink_unicast+0x1a3/0x250
[  733.756949]  netlink_sendmsg+0x2ae/0x3a0
[  733.761324]  sock_sendmsg+0x36/0x40
[  733.765213]  ___sys_sendmsg+0x26f/0x2d0
[  733.769493]  ? handle_pte_fault+0x586/0xdf0
[  733.774158]  ? __handle_mm_fault+0x389/0x500
[  733.778919]  ? __sys_sendmsg+0x5e/0xa0
[  733.783099]  __sys_sendmsg+0x5e/0xa0
[  733.787087]  do_syscall_64+0x5b/0x180
[  733.791171]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  733.796805] RIP: 0033:0x7f9117f23f10
[  733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[  733.821873] RSP: 002b:00007ffe96818398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  733.830319] RAX: ffffffffffffffda RBX: 000000005b71244c RCX: 00007f9117f23f10
[  733.838280] RDX: 0000000000000000 RSI: 00007ffe968183e0 RDI: 0000000000000003
[  733.846241] RBP: 00007ffe968183e0 R08: 000000000000ffff R09: 0000000000000003
[  733.854202] R10: 00007ffe96817e20 R11: 0000000000000246 R12: 0000000000000000
[  733.862161] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[  733.870121] ---[ end trace 28edd4aad712ddca ]---

This is because we didn't update f->result.res when create new filter. Then in
tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res
and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class().

Fix it by updating f->result.res when create new filter.

Fixes: 6e0565697a106 ("net_sched: fix another crash in cls_tcindex")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_tcindex.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -482,6 +482,7 @@ tcindex_set_parms(struct net *net, struc
 		struct tcindex_filter *nfp;
 		struct tcindex_filter __rcu **fp;
 
+		f->result.res = r->res;
 		tcf_exts_change(&f->result.exts, &r->exts);
 
 		fp = cp->h + (handle % cp->hash);

[PATCH 4.14 07/29] vhost: reset metadata cache when initializing new IOTLB

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit b13f9c6364373a1b9f71e9846dc4fb199296f926 ]

We need to reset metadata cache during new IOTLB initialization,
otherwise the stale pointers to previous IOTLB may be still accessed
which will lead a use after free.

Reported-by: syzbot+c51e6736a1bf614b3272@syzkaller.appspotmail.com
Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/vhost.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1578,9 +1578,12 @@ int vhost_init_device_iotlb(struct vhost
 	d->iotlb = niotlb;
 
 	for (i = 0; i < d->nvqs; ++i) {
-		mutex_lock(&d->vqs[i]->mutex);
-		d->vqs[i]->iotlb = niotlb;
-		mutex_unlock(&d->vqs[i]->mutex);
+		struct vhost_virtqueue *vq = d->vqs[i];
+
+		mutex_lock(&vq->mutex);
+		vq->iotlb = niotlb;
+		__vhost_vq_meta_reset(vq);
+		mutex_unlock(&vq->mutex);
 	}
 
 	vhost_umem_clean(oiotlb);

[PATCH 4.14 08/29] ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 82a40777de12728dedf4075453b694f0d1baee80 ]

According to RFC791, 68 bytes is the minimum size of IPv4 datagram every
device must be able to forward without further fragmentation while 576
bytes is the minimum size of IPv4 datagram every device has to be able
to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right
value for the ipv4 min mtu check in ip6_tnl_xmit.

While at it, change to use max() instead of if statement.

Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_tunnel.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1134,12 +1134,8 @@ route_lookup:
 		max_headroom += 8;
 		mtu -= 8;
 	}
-	if (skb->protocol == htons(ETH_P_IPV6)) {
-		if (mtu < IPV6_MIN_MTU)
-			mtu = IPV6_MIN_MTU;
-	} else if (mtu < 576) {
-		mtu = 576;
-	}
+	mtu = max(mtu, skb->protocol == htons(ETH_P_IPV6) ?
+		       IPV6_MIN_MTU : IPV4_MIN_MTU);
 
 	skb_dst_update_pmtu(skb, mtu);
 	if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) {

[PATCH 4.14 09/29] net: aquantia: Fix IFF_ALLMULTI flag functionality

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit 11ba961c916127651e12af6cad3891f8aeb25aa9 ]

It was noticed that NIC always pass all multicast traffic to the host
regardless of IFF_ALLMULTI flag on the interface.
The rule in MC Filter Table in NIC, that is configured to accept any
multicast packets, is turning on if IFF_MULTICAST flag is set on the
interface. It leads to passing all multicast traffic to the host.
This fix changes the condition to turn on that rule by checking
IFF_ALLMULTI flag as it should.

Fixes: b21f502f84be ("net:ethernet:aquantia: Fix for multicast filter handling.")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -752,7 +752,7 @@ static int hw_atl_b0_hw_packet_filter_se
 
 	rpfl2promiscuous_mode_en_set(self, IS_FILTER_ENABLED(IFF_PROMISC));
 	rpfl2multicast_flr_en_set(self,
-				  IS_FILTER_ENABLED(IFF_MULTICAST), 0);
+				  IS_FILTER_ENABLED(IFF_ALLMULTI), 0);
 
 	rpfl2_accept_all_mc_packets_set(self,
 					IS_FILTER_ENABLED(IFF_ALLMULTI));

[PATCH 4.14 10/29] ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Park Ju Hyung <qkrwngud825@gmail.com>

commit f59cf9a0551dd954ad8b752461cf19d9789f4b1d upstream.

On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.

Adding a 10ms artificial delay before rebooting fixes the issue entirely.

Patch for Realtek codecs also adds the same amount of delay after
entering D3.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -225,6 +225,7 @@ static void cx_auto_reboot_notify(struct
 	snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
 	snd_hda_codec_write(codec, codec->core.afg, 0,
 			    AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+	msleep(10);
 }
 
 static void cx_auto_free(struct hda_codec *codec)

[PATCH 4.14 11/29] ALSA: hda - Turn CX8200 into D3 as well upon reboot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Park Ju Hyung <qkrwngud825@gmail.com>

commit d77a4b4a5b0b2ebcbc9840995d91311ef28302ab upstream.

As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.

Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.

Now that we know that this bug is subject to multiple codecs,
fix the comment as well.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -211,6 +211,7 @@ static void cx_auto_reboot_notify(struct
 	struct conexant_spec *spec = codec->spec;
 
 	switch (codec->core.vendor_id) {
+	case 0x14f12008: /* CX8200 */
 	case 0x14f150f2: /* CX20722 */
 	case 0x14f150f4: /* CX20724 */
 		break;
@@ -218,7 +219,7 @@ static void cx_auto_reboot_notify(struct
 		return;
 	}
 
-	/* Turn the CX20722 codec into D3 to avoid spurious noises
+	/* Turn the problematic codec into D3 to avoid spurious noises
 	   from the internal speaker during (and after) reboot */
 	cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);
 

[PATCH 4.14 12/29] ALSA: vx222: Fix invalid endian conversions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit fff71a4c050ba46e305d910c837b99ba1728135e upstream.

The endian conversions used in vx2_dma_read() and vx2_dma_write() are
superfluous and even wrong on big-endian machines, as inl() and outl()
already do conversions.  Kill them.

Spotted by sparse, a warning like:
  sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types)

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/vx222/vx222_ops.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -275,7 +275,7 @@ static void vx2_dma_write(struct vx_core
 		length >>= 2; /* in 32bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--) {
-			outl(cpu_to_le32(*addr), port);
+			outl(*addr, port);
 			addr++;
 		}
 		addr = (u32 *)runtime->dma_area;
@@ -285,7 +285,7 @@ static void vx2_dma_write(struct vx_core
 	count >>= 2; /* in 32bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--) {
-		outl(cpu_to_le32(*addr), port);
+		outl(*addr, port);
 		addr++;
 	}
 
@@ -313,7 +313,7 @@ static void vx2_dma_read(struct vx_core
 		length >>= 2; /* in 32bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--)
-			*addr++ = le32_to_cpu(inl(port));
+			*addr++ = inl(port);
 		addr = (u32 *)runtime->dma_area;
 		pipe->hw_ptr = 0;
 	}
@@ -321,7 +321,7 @@ static void vx2_dma_read(struct vx_core
 	count >>= 2; /* in 32bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--)
-		*addr++ = le32_to_cpu(inl(port));
+		*addr++ = inl(port);
 
 	vx2_release_pseudo_dma(chip);
 }

[PATCH 4.14 13/29] ALSA: virmidi: Fix too long output trigger loop

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 50e9ffb1996a5d11ff5040a266585bad4ceeca0a upstream.

The virmidi output trigger tries to parse the all available bytes and
process sequencer events as much as possible.  In a normal situation,
this is supposed to be relatively short, but a program may give a huge
buffer and it'll take a long time in a single spin lock, which may
eventually lead to a soft lockup.

This patch simply adds a workaround, a cond_resched() call in the loop
if applicable.  A better solution would be to move the event processor
into a work, but let's put a duct-tape quickly at first.

Reported-and-tested-by: Dae R. Jeong <threeearcat@gmail.com>
Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_virmidi.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -163,6 +163,7 @@ static void snd_virmidi_output_trigger(s
 	int count, res;
 	unsigned char buf[32], *pbuf;
 	unsigned long flags;
+	bool check_resched = !in_atomic();
 
 	if (up) {
 		vmidi->trigger = 1;
@@ -200,6 +201,15 @@ static void snd_virmidi_output_trigger(s
 					vmidi->event.type = SNDRV_SEQ_EVENT_NONE;
 				}
 			}
+			if (!check_resched)
+				continue;
+			/* do temporary unlock & cond_resched() for avoiding
+			 * CPU soft lockup, which may happen via a write from
+			 * a huge rawmidi buffer
+			 */
+			spin_unlock_irqrestore(&substream->runtime->lock, flags);
+			cond_resched();
+			spin_lock_irqsave(&substream->runtime->lock, flags);
 		}
 	out:
 		spin_unlock_irqrestore(&substream->runtime->lock, flags);

[PATCH 4.14 14/29] ALSA: cs5535audio: Fix invalid endian conversion

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 69756930f2de0457d51db7d505a1e4f40e9fd116 upstream.

One place in cs5535audio_build_dma_packets() does an extra conversion
via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops,
which writes the value via cs_writel().  That is, the callback does
the conversion by itself, and we don't need to convert beforehand.

This patch fixes that bogus conversion.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/cs5535audio/cs5535audio.h     |    6 +++---
 sound/pci/cs5535audio/cs5535audio_pcm.c |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/sound/pci/cs5535audio/cs5535audio.h
+++ b/sound/pci/cs5535audio/cs5535audio.h
@@ -67,9 +67,9 @@ struct cs5535audio_dma_ops {
 };
 
 struct cs5535audio_dma_desc {
-	u32 addr;
-	u16 size;
-	u16 ctlreserved;
+	__le32 addr;
+	__le16 size;
+	__le16 ctlreserved;
 };
 
 struct cs5535audio_dma {
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -158,8 +158,8 @@ static int cs5535audio_build_dma_packets
 	lastdesc->addr = cpu_to_le32((u32) dma->desc_buf.addr);
 	lastdesc->size = 0;
 	lastdesc->ctlreserved = cpu_to_le16(PRD_JMP);
-	jmpprd_addr = cpu_to_le32(lastdesc->addr +
-				  (sizeof(struct cs5535audio_dma_desc)*periods));
+	jmpprd_addr = (u32)dma->desc_buf.addr +
+		sizeof(struct cs5535audio_dma_desc) * periods;
 
 	dma->substream = substream;
 	dma->period_bytes = period_bytes;

[PATCH 4.14 15/29] ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 8e82a728792bf66b9f0a29c9d4c4b0630f7b9c79 upstream.

I added the subsys product-id for the HDMI HDA device rather then for
the PCH one, this commit fixes this.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2205,7 +2205,7 @@ out_free:
  */
 static struct snd_pci_quirk power_save_blacklist[] = {
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
-	SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+	SND_PCI_QUIRK(0x1849, 0xc892, "Asrock B85M-ITX", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
 	SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1572975 */

[PATCH 4.14 16/29] ALSA: memalloc: Dont exceed over the requested size

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit dfef01e150824b0e6da750cacda8958188d29aea upstream.

snd_dma_alloc_pages_fallback() tries to allocate pages again when the
allocation fails with reduced size.  But the first try actually
*increases* the size to power-of-two, which may give back a larger
chunk than the requested size.  This confuses the callers, e.g. sgbuf
assumes that the size is equal or less, and it may result in a bad
loop due to the underflow and eventually lead to Oops.

The code of this function seems incorrectly assuming the usage of
get_order().  We need to decrease at first, then align to
power-of-two.

Reported-and-tested-by: he, bo <bo.he@intel.com>
Reported-by: zhang jun <jun.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/memalloc.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -242,16 +242,12 @@ int snd_dma_alloc_pages_fallback(int typ
 	int err;
 
 	while ((err = snd_dma_alloc_pages(type, device, size, dmab)) < 0) {
-		size_t aligned_size;
 		if (err != -ENOMEM)
 			return err;
 		if (size <= PAGE_SIZE)
 			return -ENOMEM;
-		aligned_size = PAGE_SIZE << get_order(size);
-		if (size != aligned_size)
-			size = aligned_size;
-		else
-			size >>= 1;
+		size >>= 1;
+		size = PAGE_SIZE << get_order(size);
 	}
 	if (! dmab->area)
 		return -ENOMEM;

[PATCH 4.14 17/29] ALSA: vxpocket: Fix invalid endian conversions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 3acd3e3bab95ec3622ff98da313290ee823a0f68 upstream.

The endian conversions used in vxp_dma_read() and vxp_dma_write() are
superfluous and even wrong on big-endian machines, as inw() and outw()
already do conversions.  Kill them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pcmcia/vx/vxp_ops.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/sound/pcmcia/vx/vxp_ops.c
+++ b/sound/pcmcia/vx/vxp_ops.c
@@ -375,7 +375,7 @@ static void vxp_dma_write(struct vx_core
 		length >>= 1; /* in 16bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--) {
-			outw(cpu_to_le16(*addr), port);
+			outw(*addr, port);
 			addr++;
 		}
 		addr = (unsigned short *)runtime->dma_area;
@@ -385,7 +385,7 @@ static void vxp_dma_write(struct vx_core
 	count >>= 1; /* in 16bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--) {
-		outw(cpu_to_le16(*addr), port);
+		outw(*addr, port);
 		addr++;
 	}
 	vx_release_pseudo_dma(chip);
@@ -417,7 +417,7 @@ static void vxp_dma_read(struct vx_core
 		length >>= 1; /* in 16bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--)
-			*addr++ = le16_to_cpu(inw(port));
+			*addr++ = inw(port);
 		addr = (unsigned short *)runtime->dma_area;
 		pipe->hw_ptr = 0;
 	}
@@ -425,12 +425,12 @@ static void vxp_dma_read(struct vx_core
 	count >>= 1; /* in 16bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 1; count--)
-		*addr++ = le16_to_cpu(inw(port));
+		*addr++ = inw(port);
 	/* Disable DMA */
 	pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK;
 	vx_outb(chip, DIALOG, pchip->regDIALOG);
 	/* Read the last word (16 bits) */
-	*addr = le16_to_cpu(inw(port));
+	*addr = inw(port);
 	/* Disable 16-bit accesses */
 	pchip->regDIALOG &= ~VXP_DLG_DMA16_SEL_MASK;
 	vx_outb(chip, DIALOG, pchip->regDIALOG);

[PATCH 4.14 18/29] USB: serial: sierra: fix potential deadlock at close

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Ogness <john.ogness@linutronix.de>

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.

The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.

Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/sierra.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -773,9 +773,9 @@ static void sierra_close(struct usb_seri
 		kfree(urb->transfer_buffer);
 		usb_free_urb(urb);
 		usb_autopm_put_interface_async(serial->interface);
-		spin_lock(&portdata->lock);
+		spin_lock_irq(&portdata->lock);
 		portdata->outstanding_urbs--;
-		spin_unlock(&portdata->lock);
+		spin_unlock_irq(&portdata->lock);
 	}
 
 	sierra_stop_rx_urbs(port);

[PATCH 4.14 19/29] USB: serial: pl2303: add a new device id for ATEN

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Movie Song <MovieSong@aten-itlab.cn>

commit 29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream.

Signed-off-by: Movie Song <MovieSong@aten-itlab.cn>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/pl2303.c |    2 ++
 drivers/usb/serial/pl2303.h |    1 +
 2 files changed, 3 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -55,6 +55,8 @@ static const struct usb_device_id id_tab
 		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
 		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -29,6 +29,7 @@
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008
 #define ATEN_PRODUCT_UC485	0x2021
+#define ATEN_PRODUCT_UC232B	0x2022
 #define ATEN_PRODUCT_ID2	0x2118
 
 #define IODATA_VENDOR_ID	0x04bb

[PATCH 4.14 20/29] USB: option: add support for DW5821e

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksander Morgado <aleksander@aleksander.es>

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream.

The device exposes AT, NMEA and DIAG ports in both USB configurations.

The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -199,6 +199,8 @@ static void option_instat_callback(struc
 #define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
 #define DELL_PRODUCT_5804_MINICARD_ATT		0x819b  /* Novatel E371 */
 
+#define DELL_PRODUCT_5821E			0x81d7
+
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
 #define KYOCERA_PRODUCT_KPC680			0x180a
@@ -1033,6 +1035,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },

[PATCH 4.14 21/29] ACPI / PM: save NVS memory for ASUS 1025C laptop

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <w@1wt.eu>

commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream.

Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an
issue by which the fan would run at full speed upon resume. Bisecting
it showed me the issue was introduced in 3.17 by commit 821d6f0359b0
(ACPI / sleep: Do not save NVS for new machines to accelerate S3). This
code only affects machines built starting as of 2012, but this Asus
1025C laptop was made in 2012 and apparently needs the NVS data to be
saved, otherwise the CPU's thermal state is not properly reported on
resume and the fan runs at full speed upon resume.

Here's a very simple way to check if such a machine is affected :

  # cat /sys/class/thermal/thermal_zone0/temp
  55000

  ( now suspend, wait one second and resume )

  # cat /sys/class/thermal/thermal_zone0/temp
  0

  (and after ~15 seconds the fan starts to spin)

Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory
for Lenovo G50-45) and reuse the function it provides. Note that this
commit was already backported to 4.9.x but not 4.4.x.

Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/sleep.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -338,6 +338,14 @@ static const struct dmi_system_id acpisl
 		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 		},
 	},
+	{
+	.callback = init_nvs_save_s3,
+	.ident = "Asus 1025C",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
+		},
+	},
 	/*
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
 	 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory

[PATCH 4.14 22/29] tty: serial: 8250: Revert NXP SC16C2552 workaround

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark <dmarkh@cfl.rr.com>

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream.

Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial:
8250: 8250_core: NXP SC16C2552 workaround

The above commit causes userland application to no longer write
correctly its first write to a dumb terminal connected to /dev/ttyS0.
This commit seems to be the culprit. It's as though the TX FIFO is being
reset during that write. What should be displayed is:

PSW 80000000 INST 00000000                           HALT
//

What is displayed is some variation of:

T 00000000           HAL//

Reverting this commit via this patch fixes my problem.

Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com>
Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_port.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -94,8 +94,7 @@ static const struct serial8250_config ua
 		.name		= "16550A",
 		.fifo_size	= 16,
 		.tx_loadsz	= 16,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
-				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},

[PATCH 4.14 23/29] serial: 8250_exar: Read INT0 from slave device, too

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Sierra <asierra@xes-inc.com>

commit 60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream.

The sleep wake-up refactoring that I introduced in

  commit c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")

did not account for devices with a slave device on the expansion port.
This patch pokes the INT0 register in the slave device, if present, in
order to ensure that MSI interrupts don't get permanently "stuck"
because of a sleep wake-up interrupt as described here:

  commit 2c0ac5b48a35 ("serial: exar: Fix stuck MSIs")

This also converts an ioread8() to readb() in order to provide visual
consistency with the MMIO-only accessors used elsewhere in the driver.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Fixes: c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_exar.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -436,7 +436,11 @@ static irqreturn_t exar_misc_handler(int
 	struct exar8250 *priv = data;
 
 	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
-	ioread8(priv->virt + UART_EXAR_INT0);
+	readb(priv->virt + UART_EXAR_INT0);
+
+	/* Clear INT0 for Expansion Interface slave ports, too */
+	if (priv->board->num_ports > 8)
+		readb(priv->virt + 0x2000 + UART_EXAR_INT0);
 
 	return IRQ_HANDLED;
 }

[PATCH 4.14 24/29] serial: 8250_dw: always set baud rate in dw8250_set_termios

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Hu <hu1.chen@intel.com>

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu <hu1.chen@intel.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -260,7 +260,7 @@ static void dw8250_set_termios(struct ua
 	long rate;
 	int ret;
 
-	if (IS_ERR(d->clk) || !old)
+	if (IS_ERR(d->clk))
 		goto out;
 
 	clk_disable_unprepare(d->clk);

[PATCH 4.14 25/29] serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinath Mannam <srinath.mannam@broadcom.com>

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.

Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -672,6 +672,7 @@ static const struct acpi_device_id dw825
 	{ "APMC0D08", 0},
 	{ "AMD0020", 0 },
 	{ "AMDI0020", 0 },
+	{ "BRCM2032", 0 },
 	{ "HISI0031", 0 },
 	{ },
 };

[PATCH 4.14 26/29] misc: sram: fix resource leaks in probe error path

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream.

Make sure to disable clocks and deregister any exported partitions
before returning on late probe errors.

Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak
on error path"), partitions are deliberately exported before enabling
the clock so we stick to that logic here. A follow up patch will address
this.

Cc: stable <stable@vger.kernel.org>     # 4.9
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/sram.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -407,13 +407,20 @@ static int sram_probe(struct platform_de
 	if (init_func) {
 		ret = init_func();
 		if (ret)
-			return ret;
+			goto err_disable_clk;
 	}
 
 	dev_dbg(sram->dev, "SRAM pool: %zu KiB @ 0x%p\n",
 		gen_pool_size(sram->pool) / 1024, sram->virt_base);
 
 	return 0;
+
+err_disable_clk:
+	if (sram->clk)
+		clk_disable_unprepare(sram->clk);
+	sram_free_partitions(sram);
+
+	return ret;
 }
 
 static int sram_remove(struct platform_device *pdev)

[PATCH 4.14 27/29] Bluetooth: avoid killing an already killed socket

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

commit 4e1a720d0312fd510699032c7694a362a010170f upstream.

slub debug reported:

[  440.648642] =============================================================================
[  440.648649] BUG kmalloc-1024 (Tainted: G    BU     O   ): Poison overwritten
[  440.648651] -----------------------------------------------------------------------------

[  440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b
[  440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047
[  440.648671] 	___slab_alloc.constprop.24+0x1fc/0x292
[  440.648675] 	__slab_alloc.isra.18.constprop.23+0x1c/0x25
[  440.648677] 	__kmalloc+0xb6/0x17f
[  440.648680] 	sk_prot_alloc+0x6b/0xc6
[  440.648683] 	sk_alloc+0x1e/0xa1
[  440.648700] 	sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth]
[  440.648716] 	sco_connect_cfm+0x166/0x281 [bluetooth]
[  440.648731] 	hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth]
[  440.648746] 	hci_event_packet+0x28b/0x2326 [bluetooth]
[  440.648759] 	hci_rx_work+0x161/0x291 [bluetooth]
[  440.648764] 	process_one_work+0x163/0x2b2
[  440.648767] 	worker_thread+0x1a9/0x25c
[  440.648770] 	kthread+0xf8/0xfd
[  440.648774] 	ret_from_fork+0x2e/0x38
[  440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047
[  440.648782] 	__slab_free+0x4b/0x27a
[  440.648784] 	kfree+0x12e/0x155
[  440.648787] 	__sk_destruct+0xd3/0xdf
[  440.648790] 	sk_destruct+0x27/0x29
[  440.648793] 	__sk_free+0x75/0x91
[  440.648795] 	sk_free+0x1c/0x1e
[  440.648810] 	sco_sock_kill+0x5a/0x5f [bluetooth]
[  440.648825] 	sco_conn_del+0x8e/0xba [bluetooth]
[  440.648840] 	sco_disconn_cfm+0x3a/0x41 [bluetooth]
[  440.648855] 	hci_event_packet+0x45e/0x2326 [bluetooth]
[  440.648868] 	hci_rx_work+0x161/0x291 [bluetooth]
[  440.648872] 	process_one_work+0x163/0x2b2
[  440.648875] 	worker_thread+0x1a9/0x25c
[  440.648877] 	kthread+0xf8/0xfd
[  440.648880] 	ret_from_fork+0x2e/0x38
[  440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x  (null) flags=0x40008100
[  440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8

When KASAN was enabled, it reported:

[  210.096613] ==================================================================
[  210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127
[  210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040

[  210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G     U     O    4.14.47-20180606+ #2
[  210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017
[  210.096693] Workqueue: hci0 hci_rx_work [bluetooth]
[  210.096698] Call Trace:
[  210.096711]  dump_stack+0x46/0x59
[  210.096722]  print_address_description+0x6b/0x23b
[  210.096729]  ? ex_handler_refcount+0x5b/0x127
[  210.096736]  kasan_report+0x220/0x246
[  210.096744]  ex_handler_refcount+0x5b/0x127
[  210.096751]  ? ex_handler_clear_fs+0x85/0x85
[  210.096757]  fixup_exception+0x8c/0x96
[  210.096766]  do_trap+0x66/0x2c1
[  210.096773]  do_error_trap+0x152/0x180
[  210.096781]  ? fixup_bug+0x78/0x78
[  210.096817]  ? hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096824]  ? __schedule+0x113b/0x1453
[  210.096830]  ? sysctl_net_exit+0xe/0xe
[  210.096837]  ? __wake_up_common+0x343/0x343
[  210.096843]  ? insert_work+0x107/0x163
[  210.096850]  invalid_op+0x1b/0x40
[  210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296
[  210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160
[  210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940
[  210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b
[  210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488
[  210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008
[  210.096920]  ? __sk_destruct+0x2c6/0x2d4
[  210.096959]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.096969]  ? __local_bh_enable_ip+0x43/0x5b
[  210.097004]  ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth]
[  210.097039]  ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth]
[  210.097075]  ? l2cap_ertm_init+0x94e/0x94e [bluetooth]
[  210.097093]  ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd]
[  210.097102]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097109]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097115]  ? __update_load_avg_se.isra.2+0x217/0x3a4
[  210.097122]  ? set_next_entity+0x7c3/0x12cd
[  210.097128]  ? pick_next_entity+0x25e/0x26c
[  210.097135]  ? pick_next_task_fair+0x2ca/0xc1a
[  210.097141]  ? switch_mm_irqs_off+0x346/0xb4f
[  210.097147]  ? __switch_to+0x769/0xbc4
[  210.097153]  ? compat_start_thread+0x66/0x66
[  210.097188]  ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth]
[  210.097195]  ? finish_task_switch+0x392/0x431
[  210.097228]  ? hci_rx_work+0x154/0x487 [bluetooth]
[  210.097260]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097269]  process_one_work+0x579/0x9e9
[  210.097277]  worker_thread+0x68f/0x804
[  210.097285]  kthread+0x31c/0x32b
[  210.097292]  ? rescuer_thread+0x70c/0x70c
[  210.097299]  ? kthread_create_on_node+0xa3/0xa3
[  210.097306]  ret_from_fork+0x35/0x40

[  210.097314] Allocated by task 2040:
[  210.097323]  kasan_kmalloc.part.1+0x51/0xc7
[  210.097328]  __kmalloc+0x17f/0x1b6
[  210.097335]  sk_prot_alloc+0xf2/0x1a3
[  210.097340]  sk_alloc+0x22/0x297
[  210.097375]  sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth]
[  210.097410]  sco_connect_cfm+0x2d0/0x566 [bluetooth]
[  210.097443]  hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth]
[  210.097476]  hci_event_packet+0x85e/0x7de2 [bluetooth]
[  210.097507]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097512]  process_one_work+0x579/0x9e9
[  210.097517]  worker_thread+0x68f/0x804
[  210.097523]  kthread+0x31c/0x32b
[  210.097529]  ret_from_fork+0x35/0x40

[  210.097533] Freed by task 2040:
[  210.097539]  kasan_slab_free+0xb3/0x15e
[  210.097544]  kfree+0x103/0x1a9
[  210.097549]  __sk_destruct+0x2c6/0x2d4
[  210.097584]  sco_conn_del.isra.1+0xba/0x10e [bluetooth]
[  210.097617]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.097648]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097653]  process_one_work+0x579/0x9e9
[  210.097658]  worker_thread+0x68f/0x804
[  210.097663]  kthread+0x31c/0x32b
[  210.097670]  ret_from_fork+0x35/0x40

[  210.097676] The buggy address belongs to the object at ffff880107e170e8
 which belongs to the cache kmalloc-1024 of size 1024
[  210.097681] The buggy address is located 120 bytes inside of
 1024-byte region [ffff880107e170e8, ffff880107e174e8)
[  210.097683] The buggy address belongs to the page:
[  210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping:          (null) index:0xffff880107e15b68 compound_mapcount: 0
[  210.110194] flags: 0x8000000000008100(slab|head)
[  210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016
[  210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000
[  210.115451] page dumped because: kasan: bad access detected

[  210.115454] Memory state around the buggy address:
[  210.115460]  ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  210.115465]  ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[  210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115472]                                                        ^
[  210.115477]  ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115481]  ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115483] ==================================================================

And finally when BT_DBG() and ftrace was enabled it showed:

       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_close
       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_release
       <...>-14979 [001] ....   186.104192: sco_sock_kill: sk ef0497a0 state 9
       <...>-14979 [001] ....   186.104193: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104246: sco_sock_kill <-sco_conn_del
kworker/u9:2-792   [001] ....   186.104248: sco_sock_kill: sk ef0497a0 state 9
kworker/u9:2-792   [001] ....   186.104249: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct <-__sk_destruct
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct: sk ef0497a0
kworker/u9:2-792   [001] ....   186.104860: hci_conn_del <-hci_event_packet
kworker/u9:2-792   [001] ....   186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266

Only in the failed case, sco_sock_kill() gets called with the same sock
pointer two times. Add a check for SOCK_DEAD to avoid continue killing
a socket which has already been killed.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/sco.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -393,7 +393,8 @@ static void sco_sock_cleanup_listen(stru
  */
 static void sco_sock_kill(struct sock *sk)
 {
-	if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket)
+	if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
+	    sock_flag(sk, SOCK_DEAD))
 		return;
 
 	BT_DBG("sk %p state %d", sk, sk->sk_state);

[PATCH 4.14 28/29] isdn: Disable IIOCDBGVAR

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ]

It was possible to directly leak the kernel address where the isdn_dev
structure pointer was stored. This is a kernel ASLR bypass for anyone
with access to the ioctl. The code had been present since the beginning
of git history, though this shouldn't ever be needed for normal operation,
therefore remove it.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/i4l/isdn_common.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1640,13 +1640,7 @@ isdn_ioctl(struct file *file, uint cmd,
 			} else
 				return -EINVAL;
 		case IIOCDBGVAR:
-			if (arg) {
-				if (copy_to_user(argp, &dev, sizeof(ulong)))
-					return -EFAULT;
-				return 0;
-			} else
-				return -EINVAL;
-			break;
+			return -EINVAL;
 		default:
 			if ((cmd & IIOCDRVCTL) == IIOCDRVCTL)
 				cmd = ((cmd >> _IOC_NRSHIFT) & _IOC_NRMASK) & ISDN_DRVIOCTL_MASK;

[PATCH 4.14 29/29] cls_matchall: fix tcf_unbind_filter missing

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit a51c76b4dfb30496dc65396a957ef0f06af7fb22 ]

Fix tcf_unbind_filter missing in cls_matchall as this will trigger
WARN_ON() in cbq_destroy_class().

Fixes: fd62d9f5c575f ("net/sched: matchall: Fix configuration race")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_matchall.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/cls_matchall.c
+++ b/net/sched/cls_matchall.c
@@ -112,6 +112,8 @@ static void mall_destroy(struct tcf_prot
 	if (!head)
 		return;
 
+	tcf_unbind_filter(tp, &head->res);
+
 	if (tc_should_offload(dev, head->flags))
 		mall_destroy_hw_filter(tp, head, (unsigned long) head);
 

Re: [PATCH 4.14 00/29] 4.14.66-stable review

[Guenter Roeck]

On Tue, Aug 21, 2018 at 08:20:53AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.66 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Aug 23 05:50:58 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 148 pass: 148 fail: 0
Qemu test results:
	total: 299 pass: 299 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.14 00/29] 4.14.66-stable review

[Naresh Kamboju]

On 21 August 2018 at 11:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.14.66 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 23 05:50:58 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.66-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.14.66-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 2f63949a6fc3f267e365d9d4920131bf3cc62aa1
git describe: v4.14.65-30-g2f63949a6fc3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.65-30-g2f63949a6fc3

No regressions (compared to build v4.14.65)



Ran 13880 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/29] 4.14.66-stable review

[Shuah Khan]

On 08/21/2018 12:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.66 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Aug 23 05:50:58 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.66-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah