From: Sasha Levin <Alexander.Levin@microsoft.com>
To: "stable@vger.kernel.org" <stable@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Surabhi Vishnoi <svishnoi@codeaurora.org>,
Rakesh Pillai <pillair@codeaurora.org>,
Kalle Valo <kvalo@codeaurora.org>,
Sasha Levin <Alexander.Levin@microsoft.com>
Subject: [PATCH AUTOSEL 4.9 25/62] ath10k: disable bundle mgmt tx completion event support
Date: Sun, 2 Sep 2018 13:14:31 +0000 [thread overview]
Message-ID: <20180902131411.183978-15-alexander.levin@microsoft.com> (raw)
In-Reply-To: <20180902131411.183978-1-alexander.levin@microsoft.com>
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ]
The tx completion of multiple mgmt frames can be bundled
in a single event and sent by the firmware to host, if this
capability is not disabled explicitly by the host. If the host
cannot handle the bundled mgmt tx completion, this capability
support needs to be disabled in the wmi init cmd, sent to the firmware.
Add the host capability indication flag in the wmi ready command,
to let firmware know the features supported by the host driver.
This field is ignored if it is not supported by firmware.
Set the host capability indication flag(i.e. host_capab) to zero,
for disabling the support of bundle mgmt tx completion. This will
indicate the firmware to send completion event for every mgmt tx
completion, instead of bundling them together and sending in a single
event.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 5 +++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 0e4d49adddd0..f69b98f4276b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1451,6 +1451,11 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cfg->keep_alive_pattern_size = __cpu_to_le32(0);
cfg->max_tdls_concurrent_sleep_sta = __cpu_to_le32(1);
cfg->max_tdls_concurrent_buffer_sta = __cpu_to_le32(1);
+ cfg->wmi_send_separate = __cpu_to_le32(0);
+ cfg->num_ocb_vdevs = __cpu_to_le32(0);
+ cfg->num_ocb_channels = __cpu_to_le32(0);
+ cfg->num_ocb_schedules = __cpu_to_le32(0);
+ cfg->host_capab = __cpu_to_le32(0);
ath10k_wmi_put_host_mem_chunks(ar, chunks);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index b8aa6000573c..2c94fe370bb8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1227,6 +1227,11 @@ struct wmi_tlv_resource_config {
__le32 keep_alive_pattern_size;
__le32 max_tdls_concurrent_sleep_sta;
__le32 max_tdls_concurrent_buffer_sta;
+ __le32 wmi_send_separate;
+ __le32 num_ocb_vdevs;
+ __le32 num_ocb_channels;
+ __le32 num_ocb_schedules;
+ __le32 host_capab;
} __packed;
struct wmi_tlv_init_cmd {
--
2.17.1
next prev parent reply other threads:[~2018-09-02 17:30 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-02 13:14 [PATCH AUTOSEL 4.9 11/62] uio: potential double frees if __uio_register_device() fails Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 12/62] tty: rocket: Fix possible buffer overwrite on register_PCI Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 13/62] f2fs: do not set free of current section Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 14/62] perf tools: Allow overriding MAX_NR_CPUS at compile time Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 15/62] NFSv4.0 fix client reference leak in callback Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 16/62] fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 17/62] macintosh/via-pmu: Add missing mmio accessors Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 18/62] ath9k: report tx status on EOSP Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 19/62] ath9k_hw: fix channel maximum power level test Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 20/62] ath10k: prevent active scans on potential unusable channels Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 21/62] wlcore: Set rx_status boottime_ns field on rx Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 22/62] MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 23/62] ata: libahci: Correct setting of DEVSLP register Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 24/62] scsi: 3ware: fix return 0 on the error path of probe Sasha Levin
2018-09-02 13:14 ` Sasha Levin [this message]
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 26/62] Bluetooth: hidp: Fix handling of strncpy for hid->name information Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 27/62] x86/mm: Remove in_nmi() warning from vmalloc_fault() Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 28/62] x86/kexec: Allocate 8k PGDs for PTI Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 29/62] gpio: ml-ioh: Fix buffer underwrite on probe error path Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 30/62] net: mvneta: fix mtu change on port without link Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 31/62] f2fs: try grabbing node page lock aggressively in sync scenario Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 32/62] f2fs: fix to skip GC if type in SSA and SIT is inconsistent Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 33/62] tpm_tis_spi: Pass the SPI IRQ down to the driver Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 34/62] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT) Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 35/62] f2fs: fix to do sanity check with reserved blkaddr of inline inode Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 36/62] MIPS: Octeon: add missing of_node_put() Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 37/62] MIPS: generic: fix " Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 38/62] iio: ad9523: Fix return value for ad952x_store() Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 39/62] net: dcb: For wild-card lookups, use priority -1, not 0 Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 40/62] Input: atmel_mxt_ts - only use first T9 instance Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 41/62] iommu/dma: Respect bus DMA limit for IOVAs Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 42/62] media: s5p-mfc: Fix buffer look up in s5p_mfc_handle_frame_{new, copy_time} functions Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 43/62] partitions/aix: append null character to print data from disk Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 44/62] partitions/aix: fix usage of uninitialized lv_info and lvname structures Sasha Levin
2018-09-02 13:14 ` [PATCH AUTOSEL 4.9 45/62] media: helene: fix xtal frequency setting at power on Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 46/62] f2fs: Fix uninitialized return in f2fs_ioc_shutdown() Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 47/62] media: em28xx: Fix DualHD disconnect oops Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 48/62] iommu/ipmmu-vmsa: Fix allocation in atomic context Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 49/62] mfd: ti_am335x_tscadc: Fix struct clk memory leak Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 50/62] f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 51/62] ALSA: riptide: Properly endian notations Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 52/62] ALSA: wss: Fix sparse warning wrt PCM format type Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 53/62] ALSA: sb: Fix PCM format bit calculation Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 54/62] ALSA: asihpi: Fix PCM format notations Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 55/62] ALSA: ad1816a: Fix sparse warning wrt PCM format type Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 56/62] ALSA: hda: Fix implicit PCM format type conversion Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 57/62] ALSA: au88x0: Fix sparse warning wrt PCM format type Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 58/62] ALSA: sb: " Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 59/62] NFSv4.1: Fix a potential layoutget/layoutrecall deadlock Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 60/62] MIPS: WARN_ON invalid DMA cache maintenance, not BUG_ON Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 61/62] RDMA/cma: Do not ignore net namespace for unbound cm_id Sasha Levin
2018-09-02 13:15 ` [PATCH AUTOSEL 4.9 62/62] fuse: Add missed unlock_page() to fuse_readpages_fill() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180902131411.183978-15-alexander.levin@microsoft.com \
--to=alexander.levin@microsoft.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pillair@codeaurora.org \
--cc=stable@vger.kernel.org \
--cc=svishnoi@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).