From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:55864 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727995AbeI0Pde (ORCPT ); Thu, 27 Sep 2018 11:33:34 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Boris Brezillon , Eric Anholt , Sean Paul Subject: [PATCH 4.18 71/88] drm/vc4: Fix the "no scaling" case on multi-planar YUV formats Date: Thu, 27 Sep 2018 11:03:52 +0200 Message-Id: <20180927090309.292115934@linuxfoundation.org> In-Reply-To: <20180927090300.631426620@linuxfoundation.org> References: <20180927090300.631426620@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: 4.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Boris Brezillon commit 658d8cbd07dae22ccecf49399e18c609c4e85c53 upstream. When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/vc4/vc4_plane.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -297,6 +297,9 @@ static int vc4_plane_setup_clipping_and_ vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], vc4_state->crtc_h); + vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && + vc4_state->y_scaling[0] == VC4_SCALING_NONE); + if (num_planes > 1) { vc4_state->is_yuv = true; @@ -312,24 +315,17 @@ static int vc4_plane_setup_clipping_and_ vc4_get_scaling_mode(vc4_state->src_h[1], vc4_state->crtc_h); - /* YUV conversion requires that scaling be enabled, - * even on a plane that's otherwise 1:1. Choose TPZ - * for simplicity. + /* YUV conversion requires that horizontal scaling be enabled, + * even on a plane that's otherwise 1:1. Looks like only PPF + * works in that case, so let's pick that one. */ - if (vc4_state->x_scaling[0] == VC4_SCALING_NONE) - vc4_state->x_scaling[0] = VC4_SCALING_TPZ; - if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) - vc4_state->y_scaling[0] = VC4_SCALING_TPZ; + if (vc4_state->is_unity) + vc4_state->x_scaling[0] = VC4_SCALING_PPF; } else { vc4_state->x_scaling[1] = VC4_SCALING_NONE; vc4_state->y_scaling[1] = VC4_SCALING_NONE; } - vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && - vc4_state->y_scaling[0] == VC4_SCALING_NONE && - vc4_state->x_scaling[1] == VC4_SCALING_NONE && - vc4_state->y_scaling[1] == VC4_SCALING_NONE); - /* No configuring scaling on the cursor plane, since it gets non-vblank-synced updates, and scaling requires requires LBM changes which have to be vblank-synced. @@ -621,7 +617,10 @@ static int vc4_plane_mode_set(struct drm vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5); } - if (!vc4_state->is_unity) { + if (vc4_state->x_scaling[0] != VC4_SCALING_NONE || + vc4_state->x_scaling[1] != VC4_SCALING_NONE || + vc4_state->y_scaling[0] != VC4_SCALING_NONE || + vc4_state->y_scaling[1] != VC4_SCALING_NONE) { /* LBM Base Address. */ if (vc4_state->y_scaling[0] != VC4_SCALING_NONE || vc4_state->y_scaling[1] != VC4_SCALING_NONE) {