From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Sasha Levin To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Marek Vasut , Steve Longerbeam , Philipp Zabel , Sasha Levin Subject: [PATCH AUTOSEL 4.9 38/98] gpu: ipu-v3: Fix CSI selection for VDIC Date: Thu, 25 Oct 2018 10:13:23 -0400 Message-Id: <20181025141423.213774-38-sashal@kernel.org> In-Reply-To: <20181025141423.213774-1-sashal@kernel.org> References: <20181025141423.213774-1-sashal@kernel.org> List-ID: From: Marek Vasut [ Upstream commit b7dfee2433576f1f030cb84cdb04b70f36554992 ] The description of the CSI_SEL bit in the i.MX6 reference manual is incorrect. It states "This bit defines which CSI is the input to the IC. This bit is effective only if IC_INPUT is bit cleared". >>From experiment it was found this is in fact not correct. The CSI_SEL bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC receives from in that case. Signed-off-by: Marek Vasut Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin --- drivers/gpu/ipu-v3/ipu-common.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index b9539f7c5e9a..99c813a4ec1f 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -715,15 +715,16 @@ void ipu_set_ic_src_mux(struct ipu_soc *ipu, int csi_id, bool vdi) spin_lock_irqsave(&ipu->lock, flags); val = ipu_cm_read(ipu, IPU_CONF); - if (vdi) { + if (vdi) val |= IPU_CONF_IC_INPUT; - } else { + else val &= ~IPU_CONF_IC_INPUT; - if (csi_id == 1) - val |= IPU_CONF_CSI_SEL; - else - val &= ~IPU_CONF_CSI_SEL; - } + + if (csi_id == 1) + val |= IPU_CONF_CSI_SEL; + else + val &= ~IPU_CONF_CSI_SEL; + ipu_cm_write(ipu, val, IPU_CONF); spin_unlock_irqrestore(&ipu->lock, flags); -- 2.17.1