From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Sasha Levin To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Stephen Boyd , Doug Anderson , Linus Walleij , Sasha Levin Subject: [PATCH AUTOSEL 4.4 16/32] pinctrl: qcom: spmi-mpp: Fix drive strength setting Date: Wed, 31 Oct 2018 19:11:21 -0400 Message-Id: <20181031231137.29429-16-sashal@kernel.org> In-Reply-To: <20181031231137.29429-1-sashal@kernel.org> References: <20181031231137.29429-1-sashal@kernel.org> List-ID: From: Stephen Boyd [ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 0643abfd8a50..8301e600e7a8 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -459,7 +459,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, pad->dtest = arg; break; case PIN_CONFIG_DRIVE_STRENGTH: - arg = pad->drive_strength; + pad->drive_strength = arg; break; case PMIC_MPP_CONF_AMUX_ROUTE: if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4) @@ -503,6 +503,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, if (ret < 0) return ret; + ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength); + if (ret < 0) + return ret; + val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT; return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val); -- 2.17.1