public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.4 17/32] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant
Date: Wed, 31 Oct 2018 19:11:22 -0400	[thread overview]
Message-ID: <20181031231137.29429-17-sashal@kernel.org> (raw)
In-Reply-To: <20181031231137.29429-1-sashal@kernel.org>

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]

If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem.  Let's fix it there too.

NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute.  If the last element (has_arg) is false then you need
to do the -EINVAL trick.

ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that.  It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.

Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 8301e600e7a8..5cd9a81a6060 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -347,13 +347,12 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = pad->pullup == PMIC_MPP_PULL_UP_OPEN;
+		if (pad->pullup != PMIC_MPP_PULL_UP_OPEN)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
 		switch (pad->pullup) {
-		case PMIC_MPP_PULL_UP_OPEN:
-			arg = 0;
-			break;
 		case PMIC_MPP_PULL_UP_0P6KOHM:
 			arg = 600;
 			break;
@@ -368,13 +367,17 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
 		}
 		break;
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		arg = !pad->is_enabled;
+		if (pad->is_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_POWER_SOURCE:
 		arg = pad->power_source;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		arg = pad->input_enabled;
+		if (!pad->input_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_OUTPUT:
 		arg = pad->out_value;
@@ -386,7 +389,9 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
 		arg = pad->amux_input;
 		break;
 	case PMIC_MPP_CONF_PAIRED:
-		arg = pad->paired;
+		if (!pad->paired)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
 		arg = pad->drive_strength;
-- 
2.17.1

  parent reply	other threads:[~2018-10-31 23:11 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 23:11 [PATCH AUTOSEL 4.4 01/32] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 02/32] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 03/32] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 04/32] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 05/32] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 06/32] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 07/32] cpupower: Fix coredump on VMWare Sasha Levin
2018-11-12 10:29   ` Rafael David Tinoco
2018-11-12 13:32     ` Greg KH
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 08/32] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 09/32] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 10/32] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 11/32] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 12/32] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 13/32] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 14/32] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 15/32] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 16/32] pinctrl: qcom: spmi-mpp: Fix drive strength setting Sasha Levin
2018-10-31 23:11 ` Sasha Levin [this message]
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 18/32] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 19/32] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 20/32] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 21/32] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 22/32] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 23/32] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 24/32] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 25/32] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 26/32] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 27/32] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 28/32] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 29/32] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 30/32] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 31/32] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:11 ` [PATCH AUTOSEL 4.4 32/32] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181031231137.29429-17-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dianders@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox